[Q] Installing Theme Add-on After v3.4 Update [Endymion] - HTC Desire S

Hello Guys,
I've just installed V3.4 Endymion Custom Rom. For that, i've unlocked the Bootloader with htcdev and used superclick to gain root.
I've just wanted to ask if it's possible to flash the theme add-on for this firmware afterwards, because i've just forgotten to flash it right befor v3.4 Update.
Or do i need to wipe and flash again?
Thanx and greets

Hi
Instructions:[/B][/SIZE]
- Full wipe if not coming from Endymion V3.0/V3.1/V3.2
- Install V3.1_base
- Optionally flash V3.1 addons package
- Install V3.4 Updater - do not flash addons package after this, the order is important!
- You're done
I would personally wipe and then install in the order Lowveld says, better to be safe than sorry : )
from my HTC Desire S using XDA App

pughie said:
Hi
Instructions:[/B][/SIZE]
- Full wipe if not coming from Endymion V3.0/V3.1/V3.2
- Install V3.1_base
- Optionally flash V3.1 addons package
- Install V3.4 Updater - do not flash addons package after this, the order is important!
- You're done
I would personally wipe and then install in the order Lowveld says, better to be safe than sorry : )
from my HTC Desire S using XDA App
Click to expand...
Click to collapse
Actually you can install the addons, and then reflash the updater. The important bit is that the updater should be last.
I should make the instructions clearer, sorry about that.
Cheers, and welcome to Endymion.
Sent from my HTC Desire S using xda premium

lowveld said:
Actually you can install the addons, and then reflash the updater. The important bit is that the updater should be last.
I should make the instructions clearer, sorry about that.
Cheers, and welcome to Endymion.
Sent from my HTC Desire S using xda premium
Click to expand...
Click to collapse
Thanks for your answer and thanks for your amazing Rom!!
I just want to ask, if my Apps/Setting will be lost, if I flash the theme add-on and the 3.4 Update again?!
Hopefully not, otherwise there will be enough work again, creating all the folders and so on...

FrikandelChris said:
Thanks for your answer and thanks for your amazing Rom!!
I just want to ask, if my Apps/Setting will be lost, if I flash the theme add-on and the 3.4 Update again?!
Hopefully not, otherwise there will be enough work again, creating all the folders and so on...
Click to expand...
Click to collapse
No, you'll be ok. Just flash the addons, an then the updater, and don't wipe anything.
Cheers!

lowveld said:
No, you'll be ok. Just flash the addons, an then the updater, and don't wipe anything.
Cheers!
Click to expand...
Click to collapse
I just wanted to confirm, that everything worked fine!
No need to reconfig and Launch Manager started immediately.
Just rebooted in IceHD.
Whic is your favourite? And wich font looks best?!

Related

[FlashPatch] Htc EVO flash-patch [v0.4] Nov-11th

BETA~
Q & A
This is the first stage of flash-patch development, this will be used to get the ports done on the INC over to the EVO in an easy suitable way that fits us all. No more rebuilding or packing a whole new zip
I will be updating the patch as we get more fixes. v0.3 is released and you can grab them below.
Downloads your Sense FlashPatch:
Non-New HTC sense
Desire HD
MyTouch 4G
Desire Z Updated 11-11
Click to expand...
Click to collapse
What the patch does:
- flashes EVO system files replacing the INC system files
- flashes EVO boot.img replacing INC boot.img
What to come:
- Delete INC files on install
- AOSP support
- 4G patch
- CAM patch
Click to expand...
Click to collapse
INC ROM Links:
- Desire Z
- Redemtion ROM
- Virtuous
- MyTouch 4G
- Skyraider
- Desire HD
How to install:
- download flash-patch (posted above)
- download an INC rom (posted above)
- full wipe required
- flash the INC ROM but DO NOT REBOOT after install
- flash the patch over the INC ROM
- now reboot
Quick example:
- wipe then flash mytouch 4g port here http://forum.xda-developers.com/showthread.php?t=813916
- then flash the flash-patch (posted above)
- your done and now running the mytouch 4G ROM on your EVO!!
Click to expand...
Click to collapse
That's pretty much it for now, later I will clean up the install and add more fixes to it... Please report back the ROM tested and/or if it failed.
ID
Click to expand...
Click to collapse
Q. Will this fix BT, MMS, Wifi, Sdcard mount etc...?
A. As soon as I find the fixes I will be adding them to the update.zip
--
Q. Will this erase any data?
A. Flashing one of he ROM's posted above means you did a full wipe so any /data would be formated, the patch itself does not format anything but write into the system.
\\More......
Click to expand...
Click to collapse
Change-log:
V0.4 desire Z:
- updated boot.img with EVO latest OTA
- updated frameworks
- added HW
- added battery percent on battery by skyraider
v0.3
- mms fix (please report which ones aren't working)
- build.prop edits
- market showing sprint apps
- data connect
- reboot issue fixed thanks to KERKEDAGAIN
v0.2:
- removed build.prop
v0.1:
- initial release
This should be very helpful.
Sent from my PC36100 using XDA App
So even after these "ports" are flashed there is still gonna be tweaks to the system needed to be up 100%?
I'm sorry if thats common sense to some but to me it seems a little tricky...because most [ROMs] that have been prted to the EVO are experincing major issues in simple catagories...e.g - MMS, BT, WiFi, (not mentioning the 4g and HDMI...
Thanks for your work and time that you have put into Android Development
Nice!! This should evolve!!!
first we fix!!
hooover said:
So even after these "ports" are flashed there is still gonna be tweaks to the system needed to be up 100%?
I'm sorry if thats common sense to some but to me it seems a little tricky...because most [ROMs] that have been prted to the EVO are experincing major issues in simple catagories...e.g - MMS, BT, WiFi, (not mentioning the 4g and HDMI...
Thanks for your work and time that you have put into Android Development
Click to expand...
Click to collapse
I will be adding the fixes all into one easy update.zip
ID
IncredibleDoes said:
I will be adding the fixes all into one easy update.zip
ID
Click to expand...
Click to collapse
You sir are THE MAN!!!
thank u bro great wrk like always
Omg, i just finished manually doing all of it grrr. Lol.
Quick question, as you said before, a sense rom will need an evo sense kernel and an aosp will need and evo aosp kernel.
How do we implement that into there? Or do we just flash it over the rom before booting?
Awesome work, thanks.
Awesome work! Your keeping the ego exciting to have. The wife hates it but that just shows how good of a job your doing. I flashed sky raider and everything perfect. I flashed the uncommon app pack because I remember reading in one of the hd Rome the it was going crazy because it had the 4 signal bars instead of the 6. Does this matter with all of the Roman or just the hd Roms? Thanks again
Igotsanevo4g said:
Omg, i just finished manually doing all of it grrr. Lol.
Quick question, as you said before, a sense rom will need an evo sense kernel and an aosp will need and evo aosp kernel.
How do we implement that into there? Or do we just flash it over the rom before booting?
Awesome work, thanks.
Click to expand...
Click to collapse
Kernel is the boot.img inside your update zip. You will need to include any necessarily modules if needed
Thanks IncDoes. I first followed your Blog tutorial for my first port. This makes everything so much easier.
barnacles10 said:
Kernel is the boot.img inside your update zip. You will need to include any necessarily modules if needed
Click to expand...
Click to collapse
What do you mean by include any necessary modules?
I'm new to the cooking, if you hadnt noticed haha.
Thanks man.
IncredibleDoes said:
BETA~
Q & A
Click to expand...
Click to collapse
I have to say, this is the best utility i EVER used. I made this fix compatible with the incredible, and i can see that it DOES need work, it does do all the work for you
Igotsanevo4g said:
What do you mean by include any necessary modules?
I'm new to the cooking, if you hadnt noticed haha.
Thanks man.
Click to expand...
Click to collapse
boot.img is necessary because like its name kinda sorta implies...without it, your phone won't be able to boot up, it would just hang on the white evo screen. The kernel is also contained inside the boot.img.
So if you want to flash a AOSP Incredible rom, you would want to get a boot.img from an AOSP Evo rom and replace the Incredible boot.img with the Evo boot.img. Same thing with a Sense rom.
ms79723 said:
boot.img is necessary because like its name kinda sorta implies...without it, your phone won't be able to boot up, it would just hang on the white evo screen. The kernel is also contained inside the boot.img.
So if you want to flash a AOSP Incredible rom, you would want to get a boot.img from an AOSP Evo rom and replace the Incredible boot.img with the Evo boot.img. Same thing with a Sense rom.
Click to expand...
Click to collapse
Ohhhhh i see.
Skyraider vanilla is vanilla right? its not just stripped sense?
So i im going to need to grab a boot.img from cyanogen or Emerald alpha right?
Or can i take a kernel itself and melt it in the boot.img included, for instance kings aosp kernel.
Or can i just flash a different kernel once i boot into the rom?
Sorry for all the questions, just trying to learn haha
Thanks
Running sky raider and the only problem I have is no capture button in the cam I guess its because the inc has the track pad. I can get camera to work by holding screen but no dice on video.
Can i flash the desire z version from inc on my evo and get evrything working? Ie: 3g, wifi, radio, bluetooth etc...
Sent from my PC36100 using XDA App
I flashed the incredible liquid rom yesterday without changing boot. Img I just flashed the patch and running fine here
Sent from my PC36100 using XDA App
elas123 said:
I flashed the incredible liquid rom yesterday without changing boot. Img I just flashed the patch and running fine here
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
was it the hybrid or straight liquid? And did incoming calls work?
Sent from my PC36100 using XDA App

Battery Mod Gingerbread 2.3.2

This is a battery Mod for the new Gingerbread Roms 2.3.2, should work on all 2.16 builds. 1% Battery
*CWM Recovery 2.5.1.3 may be the best recovery to flash this Mod*
1.Backup
2.Install via CWM
Let me know if there are any issues!
V2. Bootanimation.zip taken out
What does it do exactly ?
It will add the battery percentage, as in the picture. If you have the new Gingerbread 2.3.2 Rom this will work.
Will it install the boot screen automatically? I just want the battery mod.
Sent from my Desire HD using XDA Premium App
I can take it out if you like, then it would just be the battery %?
klquicksall said:
Will it install the boot screen automatically? I just want the battery mod.
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
Please do. I like the boot I have now from RC mix 4.0 rom.
I really like this type of batt. Thanks for the good work.
I will take it out shortly....................................
droe411 said:
I will take it out shortly....................................
Click to expand...
Click to collapse
No problem. thanks alot.
New version is up!
klquicksall said:
No problem. thanks alot.
Click to expand...
Click to collapse
droe411 said:
New version is up!
Click to expand...
Click to collapse
Thanks downloading now.
It looks sweet. Thanks alot. Let me buy you a beer. Put up a donate link.
Links up, glad you liked it. I have been tinkering with a few mods, trying to learn what I can.
klquicksall said:
It looks sweet. Thanks alot. Let me buy you a beer. Put up a donate link.
Click to expand...
Click to collapse
droe411 said:
Links up, glad you liked it. I have been tinkering with a few mods, trying to learn what I can.
Click to expand...
Click to collapse
Confirmation number: 6X8885891A981322C
Thanks for the Batt Mod.
Just for your Info I used this mod on RC MIX 4g 4.0 Works great on his rom.
Great! I'm on Android Revolution..... But as long as it is a 2.16 build it should be fine.
flashed ontop of AR 4.0 b1 and I am now stuck in a bootloop with the Android bootanimation.... Just flashed the latest version v2 as well.....
WARNING
tdesbien31 said:
flashed ontop of AR 4.0 b1 and I am now stuck in a bootloop with the Android bootanimation.... Just flashed the latest version v2 as well.....
WARNING
Click to expand...
Click to collapse
You need to wipe dalvik and the card partition. Then flash. It will work after that. Restore you back up and flash again.
Sent from my Desire HD using XDA Premium App
I am on the same Rom and it works. Just restore your backup, try clearing Dalvik cache and card partition. As long as you are on a 2.16 build it will work. So that should include every Gingerbread Rom that was built off the Gb leak.
tdesbien31 said:
flashed ontop of AR 4.0 b1 and I am now stuck in a bootloop with the Android bootanimation.... Just flashed the latest version v2 as well.....
WARNING
Click to expand...
Click to collapse
droe411 said:
Don't post warnings against me with out checking if it will work..... I am on the same Rom and it works. Just restore your backup, try clearing Dalvik cache and card partition. As long as you are on a 2.16 build it will work. So that should include every Gingerbread Rom that was built off the Gb leak.
Click to expand...
Click to collapse
I cleared Dalvik and sd partition, its still a no go. Too bad i wanted this to work.
Just restored my old rom backup...

CyanogenMod 7

I already have CyanogenMod 7 (RC4) on my phone, but now that there is a stable release I would like to get it. My question is: can I install it over RC4 without having to wipe data and cache?
Save your Files and do a FullWipe, it's recommend and a must i think.
You are on the Safty-Side when you do that
I just flashed the final release over a daily build, the thread said so, and it works fine.
You don't have to wipe, only if there is a problem. I have been updating since around nightly 29 and haven't wiped once and that includes all the rc's and the new stable but make sure you backup just in case.
Sent from my HTC Desire using XDA Premium App
Kstarz said:
You don't have to wipe, only if there is a problem. I have been updating since around nightly 29 and haven't wiped once and that includes all the rc's and the new stable but make sure you backup just in case.
Sent from my HTC Desire using XDA Premium App
Click to expand...
Click to collapse
+1
Works fine for me. Just triple wiped cache and delvik cache and everything is smooth so far.
Sent from my Incredible using XDA App
Please can anyone said how to add some other language in nightly build? There is my language in elder builds but now it was removed from last nightly.
Worked just fine for me.
I find that I can't add more language without recompiling ROM. Wrote to author with this problem.
Please, somebody, tell me how to disable annoying vibration then i unlock my phone with slider. Can't find settings for this. I'm using CyanogenMod V7.0.2 on wildfire.
Solved: just disable lock screen)
I find this funny because the day after you posted this thread the new version of V7.0.3 came out look 5 May 2011! Im sure you have already found out this information out for youself but this will answer your question just look here ok -
http://forum.cyanogenmod.com/topic/20132-cyanogenmod-7-for-the-htc-wildfire-v703-5-may-2011/
Hope this helps
Main differences with oxygen and Bluetooth FTP profile
I'm a proud user of oxygen, but one thing that does not like me is that I need a new APP for Bluetooth file transfers (medieval...).
Does CM suppport this stock?
Regards,
mgmate said:
I'm a proud user of oxygen, but one thing that does not like me is that I need a new APP for Bluetooth file transfers (medieval...).
Does CM suppport this stock?
Regards,
Click to expand...
Click to collapse
What do you mean? can you u use that app with CM7???? If thats what you were asking? the answer is yes!
PLEASE NOTE IF YOU DO NOT HAVE A HTC DESIRE THE LINKS BELOW ARE NOT FOR YOU GO HERE & FIND YOUR PHONE & THEN FOLLOW THE GUIDE BELOW INSTEAD!
http://forum.cyanogenmod.com/
Just if you are coming from another rom make sure you do a full wipe & wipe the dev cache before you flash the Cyanogen rom! If you already run a cyanogen rom on your phone now dont bother doing a wipe just flash the new rom! i would install clockwork mode 3.*.*.* with Cyanogen 7.0.3 ( or you will get stuck on a bootloop after installing! ) go here for it - http://forum.cyanogenmod.com/topic/20122-cyanogenmod-7-for-the-htc-desire-hd-v703-5-may-2011/ or if you dont wanna install the latest stable version ( & i dont know why you wouldnt want to ) or go here & install an older version the Cyanogen 6.1.3 from here - http://forum.cyanogenmod.com/topic/11011-cyanogenmod-61-for-desire-hd-v613-01012011/ ( if you want 6.1.3 version make sure you use clockwork version 2.*.*.* or you will get stuck on a bootloop after installing! )
Hope this helps

[ROM]Official Froyo Rom 2.2 Zip

Hi guys, to begin I am not a developer.
I notice that a lot of people want to come back on Official Froyo Rom for differentes reasons (S-Off their device in general).
RUU don't work very fine with goldcard or people who are on a Gingerbread rom. It also unroot the devices. So I propose you Official Froyo Rom 2.2 zip.
It doesn't unroot your device, doesn't change your Hboot and doesn't change radio. It only change the rom
1) Download Bravo_WWE_2.29.405.5_v5
2) Flash 2.x.x.x recovery (CWM 3.x.x.x version doesn't work with froyo rom)
2.5.0.7 is the best version : .img and .zip
3) Full wipe via Recovery
4) Install the "update.zip" in Recovery
5) Reboot
6) Enjoy
If you want S-Off your device, it's Here ​
Sent from my HTC Desire using XDA Premium App
Seems like a great idea to make stock ROM for recovery
Will it remove our custom HBOOTS (by alpharev), or will they stay untouched? If not removed, which will work with this ROM?
Will we stay S-OFF with this ROM??
I thought that "root" was stored in ROM-part of the memory, but i guess not I know it's the official, but is Superuser Included?
What makes this different from Teppic's pre-rooted stock 2.2 ROM?
- To go through some other points, CWM 3.x.x.x will work fine with this ROM unless you're using an update-script instead of the newer updater-script
- You don't need to rename the ZIPs in a custom recovery
No offence but this is a pointless thread as there are already stock FroYo ROMs available
spirol said:
Seems like a great idea to make stock ROM for recovery
Will it remove our custom HBOOTS (by alpharev), or will they stay untouched? If not removed, which will work with this ROM?
Will we stay S-OFF with this ROM??
I thought that "root" was stored in ROM-part of the memory, but i guess not I know it's the official, but is Superuser Included?
Click to expand...
Click to collapse
I won't remove your custom Hboot, it's stock rom so you need Stock Hboot, you can download here : Here
It's doesn't unroot your phone, so if you are rooted, Superuser will stay
Sent from my HTC Desire using XDA Premium App
It's always nice that more people take up Rom development, but as Eddy said with no mods at all, this is exactly what teppic74 has posted, namely a stock rooted Rom.
Anyway, include the following info too in your OP:
Rooted/not?
Busybox?
Version of su?
Init.d support?
Kernel-(if stock, mention that) etc...
One more thing..the term OTA suggests that this is the OTA patch that HTC sent over the network, which doesnt exactly descibe a complete stock rooted rom..
Welcome to ROM development.
EddyOS said:
What makes this different from Teppic's pre-rooted stock 2.2 ROM?
- To go through some other points, CWM 3.x.x.x will work fine with this ROM unless you're using an update-script instead of the newer updater-script
- You don't need to rename the ZIPs in a custom recovery
No offence but this is a pointless thread as there are already stock FroYo ROMs available
Click to expand...
Click to collapse
droidzone said:
It's always nice that more people take up Rom development, but as Eddy said with no mods at all, this is exactly what teppic74 has posted, namely a stock rooted Rom.
Anyway, include the following info too in your OP:
Rooted/not?
Busybox?
Version of su?
Init.d support?
Kernel-(if stock, mention that) etc...
One more thing..the term OTA suggests that this is the OTA patch that HTC sent over the network, which doesnt exactly descibe a complete stock rooted rom..
Welcome to ROM development.
Click to expand...
Click to collapse
It's correct, sorry I didn't see Teppic74 thread, I will better search the next time.
Sent from my HTC Desire using XDA Premium App

[S3] VilleC2 1% Battery Mod

As the thread name says. Stock battery with 1% steps. Flash it via TWRP recovery. Make a backup before (better safe).
If the battery indicator shows strange values then go in the TWRP recovery and wipe Cache/Dalvik cache. If you like it, use "thank you".
It works! Thanks mate!
Works perfectly, thanks a lot!
Great, thank you! Works on Trickdroid v1.
I flashed via twrp and now keep getting error system ui not responding. Of course I didnt make a backup. Any recomendations?
what about S4?
For S4 you have a lot of roms with a lot of mods and tweaks.
I don't think that you need this mod when you have all the possibilities out there.
I believe that you have this mod on viper rom and energy rom.
i'm trying to install energy rom, but no luck. also i'll try viper's one
It works!
I use TrickDroid v1 and works perfectly
Thank you!! :good:
Thank very much for S3 version Guy ,You are the One.:good:
thanks very much. it works well with my s3,
nice work~~~
A bit off topic!
Since this is a topic for HOS s3 users here it goes!
HI fellow hos s3 owners!
Great news!
Our beloved developer torxx is asking if we whant android 4.0.4, sense 4.1 and tweaks on our hos s3 devices!
Head over to trickdroid thread and tell him that we need this!
Thanks guys! RESPECT!
http://forum.xda-developers.com/showpost.php?p=31834696&postcount=4612
Thank you for this info!
Thanks man! It is working on my BackToBasics_v3.
askew11 said:
I flashed via twrp and now keep getting error system ui not responding. Of course I didnt make a backup. Any recomendations?
Click to expand...
Click to collapse
I get the same error. I also lost notification bar, it no longer exists. Any solution please? I check that option to create a backup, but I don't know where to find it and how to restore it...
When I flashed the mod, I didn't check wipe cache/dalvik cache. If I flash it again and this time check that option is there a chance to get my notification bar back?
Thanks
Sent from my HTC One S using xda app-developers app
saculetz said:
I get the same error. I also lost notification bar, it no longer exists. Any solution please? I check that option to create a backup, but I don't know where to find it and how to restore it...
When I flashed the mod, I didn't check wipe cache/dalvik cache. If I flash it again and this time check that option is there a chance to get my notification bar back?
Thanks
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
no longer investigated -> try TrickDroid for VilleC2 -> [ROM][S3][OCT 10] TrickDroid v3.0.0 | Tweaks | 4.0.3 | Sense 4.1
septamobile said:
no longer investigated -> try TrickDroid for VilleC2 -> [ROM][S3][OCT 10] TrickDroid v3.0.0 | Tweaks | 4.0.3 | Sense 4.1
Click to expand...
Click to collapse
hi
Igot same problem how do I go back to stock SystemUI. Please HELP!
UPD. Solved:
- have found original SystemUI.apk from 4.1.1 stock
- packed it to update.zip
- and flashed from recovery
Doesnt work, got a systeumUI error - status bar is gone, lot of pop-up errors...
can run on stock rom?? s3
daothuan said:
can run on stock rom?? s3
Click to expand...
Click to collapse
Only on ICS 4.0.3.

Categories

Resources