Which Kernel for I9100 KJ4? - General Questions and Answers

Hi all,
I am in the process of rooting my new Samsung Galaxy S2 GT-I9100
I am looking for the correct Kernel to replace the current:
Kernel Version 2.6.35.7-I9100BVKJ4[email protected]#2
I have had a look for the matching kernel on the thread:
http://forum.xda-developers.com/showthread.php?t=1103399
However I can only find one which is KJ3 and KJ5. Is it ok to use either of these and if so which one is better?
Thanks for any advice from a newbie

Related

[Q] How to overclock Galaxy S3 with Kyrillo's ROM v5.6

Hi,
I'm kinda new to all this rooting and custom roms. But I found this forum very helpful.
I've got a Samsung S3 (GT-I5800). Rooted it and installed Kyrillos v5.6 on it.
Then I installed SetCPU.
The change log for Kyrillos v5.6 states it should run at 1300Mhz. But I can't set it any higher then 667Mhz with SetCPU.
I tried searching this forum but didn't found a solution. I'm probably searching with the wrong keywords
So can any of you guys/girls point me in the right direction ? Or post a how to ?
Thanks a lot !!!
Uh, I think you mean Galaxy 3 and not S3. I don't think the S3 is out as yet.. and yes, i5800 is in fact the Galaxy 3.
try going to the galaxy 3 specific forum. Link :
http://forum.xda-developers.com/forumdisplay.php?f=866
Yeah Galaxy 3 My bad.
Thanks for the link. I think I found the solution in that thread.
Need to flash the kernel with something called:
Fugumod 800Mhz v2.4.beta3
Hope it works !!!

[Q] [Question] It's the Semaphore [Kernel] 2.4.0 xxJW1 Fully Compatible With...

Hi, first of all, thank you all for the work you do here and so invaluable assistance to users like me.
My question is this:
I have a GT I9000 SGS GingerBread XWJVZ v2.3.6 Open EUR [kernel semaphore v2.1.1]
Can i upgrade the kernel version to 2.4.0 or is reserved to JW1?
From what I read in the post (in which I can not now ask this question) is reserved for GingerBread not for the particular version, but if you were kind enough to confirm I'd appreciate it.
Much improvement over the v2.1.1 with which I am very happy?
Thank you again.
Please..
33 views and no one answers ...
please if someone had 3 minutes to confirm I would be very grateful ...
regards
Yes you can use 2.4.0, I'm using it on jvt!
Sent using TCP/IP
Thanks....
Thank you very much, has been a great help.
Can anybuddy help me in finding a suitable kernel and flashing via odin
Sir I have downloaded the zip files of slim rom .....but unable to open in cwm recovery mode due to 3e recovery
Mode .... I know the procedure of flashing the kernel via odin..... just I need is kernel file for my galaxy s I 9000 so plz help me in finding and downloading the suitable kernel ... My phone model is Gt i9000, Firmware version.: 2.3.6...,Baseband version :I9000BUJV4, Build no. : GINGERBREAD.BUJVG , Kernel version : 2.6.35.7-I9000BUJVG-CL719381 [email protected]#2
from My Samsung Galaxy S Gt i9000

[Q] Which Kernel

:fingers-crossed:
Hi I am new to this forum so hope I have finally got this in the right place. I have a rooted samsung s2 mobile which I have flashe dthe ICS 4.0.4 I am interested in learning more about Kernels, which ones can I use, how do I know which each one does and how do I understand the language of the Kernel. If anyone can help / advise dummies guide required......
thanks in advance
Pluto
ysigina practically
You should be able to find several kernels suitable for your SGS2 right here (XDA). Search for 'kernel collection sgs2' on google. The 3rd link from the top should be useful and have current ICS kernels (which are compatible with your device).
To name just a few:
N.e.a.k.
Siyah
CF-Root
Phenomenal
Make sure that, whatever kernel you decide to try, it's compatible with your ROM (in your case ICS 4.0.4).
best kernel for galaxy s3
Hi Guys,
can someone recommend me a good kernel for SGS3 based on JB?
Thx
morskipas

Glalaxy s2 ics 4.0 roms? request?

hey my mom got a galaxy s2 and i like the kernel and softwere on it in other word i like the rom it self so i am looking for a rom that is
ics 4.0.4 kernel 3.0.8, like this one in the video bellow please i really want it so bad
http://www.youtube.com/watch?v=K6FuLb_gs5Y
RootYBoyz said:
hey my mom got a galaxy s2 and i like the kernel and softwere on it in other word i like the rom it self so i am looking for a rom that is
ics 4.0.4 kernel 3.0.8, like this one in the video bellow please i really want it so bad
http://www.youtube.com/watch?v=K6FuLb_gs5Y
Click to expand...
Click to collapse
Maybe You should look in S2 forums.
but i have htc inspire 4g and i want the galaxy s2 4.0.4 kernel 3.0.8 rom i search it but ill give the one that looks like jelly bean and i want the one that looks like galaxu s2 ics thanks for reply
If you really want it look into how to do it yourself. This is a development forum, not a request forum.
And given that kernels are phone specific and irrelevant to the look of the ROM, I'm guessing a significant amount of research will be necessary. Good luck.
ok thanks

[Q] Glaxy S2 i9100

Hello i have Glaxy S2 i9100 and i rooted it with Siyah-s2-v6.0b4 via odin
my question is can i put cyanogenmod or pac rom on this kernel or do i have to flash another one
i`m not sure i`ve read on some post that i can and in others that i can`t
sorry for being a noob
gens_fan said:
Hello i have Glaxy S2 i9100 and i rooted it with Siyah-s2-v6.0b4 via odin
my question is can i put cyanogenmod or pac rom on this kernel or do i have to flash another one
i`m not sure i`ve read on some post that i can and in others that i can`t
sorry for being a noob
Click to expand...
Click to collapse
U can flash any ROM u want, unless the ROM owner explicitly specifies a different kernel.
I experienced that some special ROMs aren't working with siyah, but the popular ones like CM, AOKP, PA and MIUI will be compatible.
If this answer helped you in any way, hit the thanks button.
Phone: Samsung Galaxy SII GT-I9100
ROM: XenonHD v10
Sent from mobile
gens_fan said:
Hello i have Glaxy S2 i9100 and i rooted it with Siyah-s2-v6.0b4 via odin
my question is can i put cyanogenmod or pac rom on this kernel or do i have to flash another one
i`m not sure i`ve read on some post that i can and in others that i can`t
sorry for being a noob
Click to expand...
Click to collapse
Any rom you flash will have a kernel packaged with the rom so you don't have to worry about compatibility with the initial flash. Should you decide on a different kernel with that rom then you check for compatibility between desired kernel amd rom
Sent from my CLEAN Note ll
brandonarev said:
any rom you flash will have a kernel packaged with the rom so you don't have to worry about compatibility with the initial flash. Should you decide on a different kernel with that rom then you check for compatibility between desired kernel amd rom
sent from my clean note ll
Click to expand...
Click to collapse
thank`s a lot guy`s
ectsEnt days
brandonarev said:
Any rom you flash will have a kernel packaged with the rom so you don't have to worry about compatibility with the initial flash. Should you decide on a different kernel with that rom then you check for compatibility between desired kernel amd rom
Sent from my CLEAN Note ll
Click to expand...
Click to collapse
One more question if i may
i unlocked my phone with galaxy sim unlock and i understood that it modifies the efs. files
i backed them up but can i put a custom rom (cyanogen) on the phone and not have problems?
thank`s in advance
gens_fan said:
One more question if i may
i unlocked my phone with galaxy sim unlock and i understood that it modifies the efs. files
i backed them up but can i put a custom rom (cyanogen) on the phone and not have problems?
thank`s in advance
Click to expand...
Click to collapse
There won't be any problems.
If this answer helped you in any way, hit the thanks button.
Phone: Samsung Galaxy SII GT-I9100
ROM: XenonHD v10
Sent from mobile
root galaxy s2 i9100
hello.. i recently got a galaxy s 2 i9100 from my friend..
i checked baseband version . it is I9100ZSLPQ . i think its from china or hongkong.
it has ics 4.0.4 installed in it.
i want to root this device. but cant find any kernel for this ..can any body help me regarding this issue?

Categories

Resources