Ok, I've followed directions for2 different root methods and have yet to attain root. It seems that when i do the adb reboot, it doesn't install. However i have all the fils I need including asus sync. Any suggstions?
Also if anyone knows of a new one-click out there compatible with v.21 that would be awesome.
Try ViperMod
http://forum.xda-developers.com/showthread.php?p=21007398
Sent from my Transformer TF101 using Tapatalk
If you have a B60 series, you can still use this, http://forum.xda-developers.com/showthread.php?t=1185104
Thanks for those. How do i know which Bxx i have? Serial#?
Sent from my SGH-T959 using XDA App
You should have a sticker by your connector. That's the first place to look.
---------- Post added at 05:26 PM ---------- Previous post was at 05:23 PM ----------
I have a B50 .21 and just yesterday rooted following this method.
http://forum.xda-developers.com/showthread.php?t=1198303
Regards.
How do I figure out how to identify the Bxx version based onthe sn? Mine starts with BC0
i was in the same situation did you try to flash back to .19 i followed this and got it to work http://forum.xda-developers.com/showthread.php?t=1417006
jeepjeep thanks, I'm going to see if i can find a way not to downgrade first. But it has certainly crossed my mind. It's looking like the viable option.
Hey OP, ignore everyone else and listen to me. In order for nachoroot or viper to work, your asus sync needs to be synced. When you connect your TF to your PC, you need to press the sync icon on your TF and wait. It will fail to recognize the first time. Press again. It will fail to recognize a second time. Keep trying. Usually, the third time is a charm.
And I am putting this in big font so you don't accidentally miss this post.
And yes, I am an ass.
PS - so many bad advises these days.
did you try nachoroot? I have a B80 with .21 that i had no problem rooting about a week ago.
---------- Post added at 10:09 PM ---------- Previous post was at 10:03 PM ----------
vipermod does not work with .21
BoPryor said:
did you try nachoroot? I have a B80 with .21 that i had no problem rooting about a week ago.
---------- Post added at 10:09 PM ---------- Previous post was at 10:03 PM ----------
vipermod does not work with .21
Click to expand...
Click to collapse
How is ViperMod not working on .21? It's basically nachoroot.
RazorClaw is the one that does not work on .21
Sent from my Transformer TF101 using Tapatalk
goodintentions said:
Hey OP, ignore everyone else and listen to me. In order for nachoroot or viper to work, your asus sync needs to be synced. When you connect your TF to your PC, you need to press the sync icon on your TF and wait. It will fail to recognize the first time. Press again. It will fail to recognize a second time. Keep trying. Usually, the third time is a charm.
And I am putting this in big font so you don't accidentally miss this post.
I
And yes, I am an ass.
PS - so many bad advises these days.
Click to expand...
Click to collapse
Lol, i appreciate all advice. Do I need to sync pre adb? Also, again. How do I identify my Bxx version my serial number starts with BC0
baseballfanz said:
How is ViperMod not working on .21? It's basically nachoroot.
RazorClaw is the one that does not work on .21
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
Not sure from experience if it works or not. But on the thread it says in bold letters that it does not work on the latest firmware...which is v.21
---------- Post added at 11:17 PM ---------- Previous post was at 11:13 PM ----------
here is the thread to find your model #
It is by your charger connection
I had no problem with asus sync.. so hopefully you dont
gorealmighty said:
Lol, i appreciate all advice. Do I need to sync pre adb? Also, again. How do I identify my Bxx version my serial number starts with BC0
Click to expand...
Click to collapse
You need to the PC to recognize via asus sync first thing before you do anything.
Doesn't matter what your serial number is. Just use nachoroot.
Remember this, not all advice are equal. Look at my siggy. That's my resume for android devices.
Added by edit.
You need to download and install asus sync on your computer.
you can also type "adb devices" in cmd to ensure that adb can see your device
BoPryor said:
you can also type "adb devices" in cmd to ensure that adb can see your device
Click to expand...
Click to collapse
Well, while this is true, adb can still recognize your adb devices while asus sync ain't syncing. The first steps of nachoroot will not work if asus sync ain't synced.
goodintentions said:
Well, while this is true, adb can still recognize your adb devices while asus sync ain't syncing. The first steps of nachoroot will not work if asus sync ain't synced.
Click to expand...
Click to collapse
Not sure if this will be true for your device or not. All i know is that for my device I did not have to mess with Asus sync at all. I find it odd though that the nacho root thread says nothing of the neccessity of Asus sync.. Sync it up.. its not going to hurt anything but I feel it is an unnecessary step. Now lets get back to gorealmighty's problem and stop the unneeded bickering.
BoPryor said:
Not sure if this will be true for your device or not. All i know is that for my device I did not have to mess with Asus sync at all. I find it odd though that the nacho root thread says nothing of the neccessity of Asus sync.. Sync it up.. its not going to hurt anything but I feel it is an unnecessary step. Now lets get back to gorealmighty's problem and stop the unneeded bickering.
Click to expand...
Click to collapse
Actually, I think you might be right. I work with so many devices that sometimes I get confused. May be I was thinking of the rooting process for HTC devices. My bad.
O.O good lord theres no easy answer for this lol. downgrading is still looking pretty viable. I think I may end up giving my laptop and TF to a buddy of mine who is pretty command prompt savvy.
ok, so I tried the sync thing, Ive tried running through CMD, maybe im missing something or over complicationg things. do I need to bring up adb the same way as described in the idiot proof guide...which apparently im proving able to beat or do I simply enter into cmd then follow the nachorot instructions as posted...because that doesnt seem logical. no path etc.
as much as I hate a Youtube tutorial I may have to go find an extensive vid tutorial -.-'
guys, little debate aside, I do appreciate all the help, hopefully your patience outlasts my inexperience.
and just to throw my 2cents in. Razorclaw makes it painfully clear that it is not .21 friendly, however I have read a couple of posters who have had what appears to be hit or miss success.
Still dont know how to identify Bxx version...just saying.
Do you know how to command prompt navigate to your android folder? What windows are u using?
Don't get me wrong. The answer is easy. Its the receiver that's the problem. Please don't take offense. I've been dealing with nontechies for years. It usually boils down to the nontechie not doing something right.
Related
Hi everyone,
Yesterday I tried to install stock rom again by following a tutorial which is on this forum too but since I don't have enough posts to post an post in development section. I decided to post it here
Since I installed the stock rom and kernel on my device I can't boot up anymore It just stuck at the begin screen of asus;s I tried to use NvFlash but without succes because everytime I put my device in APX mode(this works) and then run the .bat file apx mode removes and the bat file says no device found;s
So then I tried wiping all data by using some volume button, tried to cold boot but didn't work neither. Tried to get into recovery but can't boot after that.
SO I would really appreciate it if someone could help me
P.S. I tried this unrooting/stock rom method:
http://forum.xda-developers.com/showthread.php?t=1154947
And I was running Revolver ROM.(latest update)
Yours Kasper
This post would not belong in the development section FYI..you are in the right place, only post in Dev section if you are developing something.
What is your serial number? B70 and later cannot use NVflash from what I understand so if you are B70 or later you may be bricked..
Thanks for your fast reaction! and where can I find my serial number? and if I am bricked is there any way to get un bricked?
kaspertje100 said:
Thanks for your fast reaction! and where can I find my serial number? and if I am bricked is there any way to get un bricked?
Click to expand...
Click to collapse
Look near the charging port, should be a sticker that start with a "B".
Also on the back of the box if you still have it.
Sent from my Transformer TF101 using Tapatalk
Kay thanks, but I removed all my stickers and had to threw away the box when I left America with the plane;s (didn't fit in my bag) So I guess im 70b+ else NvFlash would work? But is there maybe some other way to get my device unbricked or is the only thing I can do is waiting untill Nvflash supports 70b +?
baseballfanz said:
Look near the charging port, should be a sticker that start with a "B".
Also on the back of the box if you still have it.
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
It can also start with a "C" (newest TF's)
---------- Post added at 08:03 PM ---------- Previous post was at 08:01 PM ----------
kaspertje100 said:
Kay thanks, but I removed all my stickers and had to threw away the box when I left America with the plane;s (didn't fit in my bag) So I guess im 70b+ else NvFlash would work? But is there maybe some other way to get my device unbricked or is the only thing I can do is waiting untill Nvflash supports 70b +?
Click to expand...
Click to collapse
You can determine if you can use nvflash. See here
gls9 said:
It can also start with a "C" (newest TF's)
---------- Post added at 08:03 PM ---------- Previous post was at 08:01 PM ----------
You can determine if you can use nvflash. See here
Click to expand...
Click to collapse
well does this only work on linux cuz i can't run this on windows? or how should I run that
Are you stuck on the very first screen that says Eee Pad or the second one that just has a silve ASUS in the middle? Cause if it's the second...it's the bootanimation so couldn't you just go into recovery and clear and reflash?
its the silver I can get into recovery but wiping or cold-booting only results in freeze;s and trying to install a new ROM (EVEN THE official of asus rom) it gives an error the Yellow Triangle above the android man;ss
kaspertje100 said:
its the silver I can get into recovery but wiping or cold-booting only results in freeze;s and trying to install a new ROM (EVEN THE official of asus rom) it gives an error the Yellow Triangle above the android man;ss
Click to expand...
Click to collapse
Assuming you have CWM Recovery...did you try using the Format option...then reinstalling a ROM? Just a thought.
SiNJiN76 said:
Assuming you have CWM Recovery...did you try using the Format option...then reinstalling a ROM? Just a thought.
Click to expand...
Click to collapse
Well I don't have clockwork;s I have stock asus recovery;p
So i recently unrooted my B90 Transformer, after hearing that Asus would give us ICS. I'm back on the stock ROM now, and it updated to the 8.6.5.21 firmware already. Changed my mind last night, and decided to root it again, because there will probably be a handful of better ICS ROMs out there soon enough. So I searched several different forums for a way to root the .21 firmware, and almost all of them gave me NachoRoot, but they said it only works on some B70 and below devices. I didn't even try that one, because I don't use ADB and don't have it set up.
I tried RazorClaw, didn't work. Tried this method, no dice. Can anyone point me in the right direction?
Mardenator said:
So i recently unrooted my B90 Transformer, after hearing that Asus would give us ICS. I'm back on the stock ROM now, and it updated to the 8.6.5.21 firmware already. Changed my mind last night, and decided to root it again, because there will probably be a handful of better ICS ROMs out there soon enough. So I searched several different forums for a way to root the .21 firmware, and almost all of them gave me NachoRoot, but they said it only works on some B70 and below devices. I didn't even try that one, because I don't use ADB and don't have it set up.
I tried RazorClaw, didn't work. Tried this method, no dice. Can anyone point me in the right direction?
Click to expand...
Click to collapse
NachoRoot should work for you. It has nothing to do with the SBK so it doesn't matter
if you're pre or post B70.
NachoRoot requires ADB, which I don't have, nor do I have much experience with. Hence the reason I didn't use it. Unless there's a different NachoRoot that automates the process, it's a no go for me. Thanks for the suggestion, though.
Try this it is an automated version of Nacho. Originally for Prime, but reports of ppl with TF101 using it.
Seg2012 said:
Try this it is an automated version of Nacho. Originally for Prime, but reports of ppl with TF101 using it.
Click to expand...
Click to collapse
Okay, I'll give it a shot.
Mardenator said:
Okay, I'll give it a shot.
Click to expand...
Click to collapse
Let us know how it goes.
Having trouble installing the drivers. Smh.
Found a guide to install the drivers, but when I try to point Device Manager to the right driver, it doesn't show the files and won't let me successfully update. FML
Mardenator said:
Found a guide to install the drivers, but when I try to point Device Manager to the right driver, it doesn't show the files and won't let me successfully update. FML
Click to expand...
Click to collapse
Have you got your tablet in USB Debuggin mode?
Seg2012 said:
Have you got your tablet in USB Debuggin mode?
Click to expand...
Click to collapse
Yes, USB Debugging is on. Finally got the MTP driver installed, about to try the other two. Hopefully when I get them installed, I can run ViperMod.
Mardenator said:
Yes, USB Debugging is on. Finally got the MTP driver installed, about to try the other two. Hopefully when I get them installed, I can run ViperMod.
Click to expand...
Click to collapse
Keep me posted.
Update: Installed all three drivers directly from Asus, tried to run ViperMod again. For the 9999999th time, I got a diagnostic message that said:
Cannot execute "C:\DOCUME~1\JUSTIN~1\LOCALS~1\Temp\Rar$EX70.464\viperMOD PrimeTime v4.1\viperMOD PrimeTime v4.1.exe"
Followed all the directions, but still came up with this.
Mardenator said:
Update: Installed all three drivers directly from Asus, tried to run ViperMod again. For the 9999999th time, I got a diagnostic message that said:
Cannot execute "C:\DOCUME~1\JUSTIN~1\LOCALS~1\Temp\Rar$EX70.464\viperMOD PrimeTime v4.1\viperMOD PrimeTime v4.1.exe"
Followed all the directions, but still came up with this.
Click to expand...
Click to collapse
Did you extract the files.
Seg2012 said:
Did you extract the files.
Click to expand...
Click to collapse
Yes, with the same result.
Mardenator said:
NachoRoot requires ADB, which I don't have, nor do I have much experience with. Hence the reason I didn't use it. Unless there's a different NachoRoot that automates the process, it's a no go for me. Thanks for the suggestion, though.
Click to expand...
Click to collapse
Q. Do I need ADB?
A. Yes, but you don't need to set it up or anything. I have packaged it as part of the .exe and it should work just fine.
Click to expand...
Click to collapse
From 2nd post in the ViperMod thread.
You need to download the .rar file. Extract. open folder until you get to all the files. Right click on "viperMOD PrimeTime v4.1" select run as Administrator, you should get the command prompt with red text on it.
Seg
---------- Post added at 11:16 PM ---------- Previous post was at 11:15 PM ----------
Cannot execute "C:\DOCUME~1\JUSTIN~1\LOCALS~1\Temp\Rar$EX70.464\v iperMOD PrimeTime v4.1\viperMOD PrimeTime v4.1.exe"
this is trying to run from a temp directory, just extract to desktop
I think reading a few threads about ADB and its use might be easier than the method you are trying to go about this.
Tazzaras said:
I think reading a few threads about ADB and its use might be easier than the method you are trying to go about this.
Click to expand...
Click to collapse
Seriously the vipermod method is a piece of piss. Unfortunately for me my Tf is not supported.
baseballfanz said:
From 2nd post in the ViperMod thread.
Click to expand...
Click to collapse
Seg2012 said:
You need to download the .rar file. Extract. open folder until you get to all the files. Right click on "viperMOD PrimeTime v4.1" select run as Administrator, you should get the command prompt with red text on it.
Seg
---------- Post added at 11:16 PM ---------- Previous post was at 11:15 PM ----------
Cannot execute "C:\DOCUME~1\JUSTIN~1\LOCALS~1\Temp\Rar$EX70.464\v iperMOD PrimeTime v4.1\viperMOD PrimeTime v4.1.exe"
this is trying to run from a temp directory, just extract to desktop
Click to expand...
Click to collapse
Where do I find the .rar file? you're talking about a rar of ViperMod, right?
Mardenator said:
Where do I find the .rar file? you're talking about a rar of ViperMod, right?
Click to expand...
Click to collapse
Yes, from the link i gave you. Dowload the windows version which gives you a rar file. Extract this to desktop. Open the folder that u extracted, open the next folder, right click vipermod and run as administrator
I used the Moboboro and SuperOneClick method. Everything went smoothly, SOC went through its routine and told me my device was now rooted. The superuser app appeared in my drawer and updated itself. I figured everything was good. Wrong. Rootchecker and busybox are both telling me the device (UG802) is not actually rooted. Any ideas what I can do?
Thanks
Unfortunately I have exactly the same problem when I attempt to root ug 802. Will appreciate any help!
I'm going thru the same thing. I guess there is a Chinese tool that works but I'm not up for trying.
http://forum.xda-developers.com/showthread.php?t=2139454
I read the ug802 comes prerooted ?? I have been able to load apks thru astro without issue but also got non rooted message using busybox.
Root doesn't appear to matter as there isn't a ROM based off the JB firmware it comes with AFAIK
---------- Post added at 03:50 AM ---------- Previous post was at 03:45 AM ----------
I just stumbled across this and might give it a try tonite
You may have to register to get links
http://www.arctablet.com/blog/forum...mini-pc-rooted-firmware-from-20121112-update/
koii said:
Unfortunately I have exactly the same problem when I attempt to root ug 802. Will appreciate any help!
Click to expand...
Click to collapse
Meaby this is something for yah: freaktab.com/showthread.php?2632-UG802-2dark4u-Finless-custom-ROM-version-1-7-true-1080-and-overclock-AND-best-performance-ever
pulsaris said:
Meaby this is something for yah: freaktab.com/showthread.php?2632-UG802-2dark4u-Finless-custom-ROM-version-1-7-true-1080-and-overclock-AND-best-performance-ever
Click to expand...
Click to collapse
Depends on which UG802 version you have. On that forum there's a warning that the ROM is not for use on the latest version of the UG802, it kills the wi-fi.
Getting my ug802 into recovery is about impossible. Mine has no reset button and I'm not up for opening the case. Somebody has to have a way to do this easy.
pwrshft99 said:
Getting my ug802 into recovery is about impossible. Mine has no reset button and I'm not up for opening the case. Somebody has to have a way to do this easy.
Click to expand...
Click to collapse
FWIW, opening the case is a piece of cake. It's just held on with tabs. Slide a flat head screwdriver above the HDMI port and gently work it back and forth. It will crack open and then you can just work your way around. Why do you need to open the case?
According to what I've read you can run a jumper wire across to pin terminals and force the ug802 into recovery mode. This seems to be what those that have tried and failed to root have resorted to to get their device out of boot loop.
I've modded a few androids but this one is tough
pwrshft99 said:
According to what I've read you can run a jumper wire across to pin terminals and force the ug802 into recovery mode. This seems to be what those that have tried and failed to root have resorted to to get their device out of boot loop.
I've modded a few androids but this one is tough
Click to expand...
Click to collapse
Ok, finally found a method that worked for me. Have to wait for next post to post a link....
http://www.armtvtech.com/armtvtechforum/viewtopic.php?t=28
It is for the MK808, but it worked for me. You need an account to see the download link for the file, but you can just google the file name and find the download link that way.
Thanks for the update... I'm going to give this a shot tonite. I'm thinking I don't have the right drivers or something
---------- Post added at 06:53 AM ---------- Previous post was at 06:01 AM ----------
OK this worked for as well!! Big thank you!!
I'd like to add that I got stuck until I realized that after each reboot I had to back into settings and under ubs click connect to PC. Once I did that it rooted right away. Now we just need some new ROMs to try!!
Hi, im using this rom and just need to install. Already came with SU. No need to root
Since I use that one I never root again
Install an uninstaller root apk, and desinstall all apk you dont need it
I have an Infuse 4g that I've rooted and romed multiple times with no problem, but about 2 months ago I updated it to 4.2.1, rooted and romed it with paranoid android and eventually bricked It and restored it back to stock using Odin. I was planning to sell it until I changed my mind because it's such an awesome phone , so I decided to reroot it. That's when I tried rerooting it, but it didn't show up on the computer when I connected it. I even tried using 3 other computers, different usb cords, and even the different usb ports on the computers as recommended.
I've never had this kind of problem before, and if I did I looked on here and always found the answer. I even waited to see if anyone had the same problem which I did find a thread on it, but it has become inactive with no solution. I would be very grateful and willing to donate to someone who could help. I'd much rather donate some money than having to buy another phone that I can root . Thanks in advance
mbwhite260 said:
I have an Infuse 4g that I've rooted and romed multiple times with no problem, but about 2 months ago I updated it to 4.2.1, rooted and romed it with paranoid android and eventually bricked It and restored it back to stock using Odin. I was planning to sell it until I changed my mind because it's such an awesome phone , so I decided to reroot it. That's when I tried rerooting it, but it didn't show up on the computer when I connected it. I even tried using 3 other computers, different usb cords, and even the different usb ports on the computers as recommended.
I've never had this kind of problem before, and if I did I looked on here and always found the answer. I even waited to see if anyone had the same problem which I did find a thread on it, but it has become inactive with no solution. I would be very grateful and willing to donate to someone who could help. I'd much rather donate some money than having to buy another phone that I can root . Thanks in advance
Click to expand...
Click to collapse
Try qkster heimdall to restore back stock gb 2.3.6
xxxSuperserieSxxx said:
Try qkster heimdall to restore back stock gb 2.3.6
Click to expand...
Click to collapse
I already have stock 2.3.6. and it won't go into download mode anyways because it doesn't connect to the computer.
you can try using a usb-jig and force it into download mode
then try connection either heimdall or odin in download mode
qkster said:
you can try using a usb-jig and force it into download mode
then try connection either heimdall or odin in download mode
Click to expand...
Click to collapse
Does the USB-Jig at this site actually work with the Infuse 4G?
http://usbjig.com/
get it on ebay for about $1 - any galaxy jig works
Ok thanks, ill try that.
xxxSuperserieSxxx said:
Try qkster heimdall to restore back stock gb 2.3.6
Click to expand...
Click to collapse
Doesn't restoring mean you will lose the files you used to have on the phone? I have the same issue, and it doesn't help, since I have files on the actual phone which I need to get !
---------- Post added at 04:37 PM ---------- Previous post was at 04:32 PM ----------
SteveCampsOut said:
Does the USB-Jig at this site actually work with the Infuse 4G?
http://usbjig.com/
Click to expand...
Click to collapse
If I understand correctly, the 'jig' option only helps getting into dowload mode, correct ? I have files on the phone I would have life to get off, how do you suggest I go about doing this ?
---------- Post added at 04:40 PM ---------- Previous post was at 04:37 PM ----------
qkster said:
get it on ebay for about $1 - any galaxy jig works
Click to expand...
Click to collapse
Hey, what do you suggest for getting files off the phone unto a computer?
1 - jig = download mode
2 - files to PC?
- USB, mount drives to copy sdcards
- USB, run ADB from Android SDK to copy anything... Use adbmagic or android commander for a window-based interface
- SMB, to copy to PC via wifi
-CIFS (if the kernel supports it) to copy to PC via wifi
First option is easiest, others require some searching, reading, learning, and setup on your part.
--- if you are talking about your apps, run TiBu first and then copy the contents of the TitaniumBackup folder from phone to PC along with everything else you want to save.
--- To fix USB connection problems, if you are running windows, you can try removing the phone usb entries from device manager. I wrote something up on this a while ago.. I'll post a link when I'm back in front of a computer.
Sent from my SAMSUNG-SGH-I997 using xda premium
If I understand correctly, the 'jig' option only helps getting into download mode, correct ? I have files on the phone I would have life to get off, how do you suggest I go about doing this ?
Click to expand...
Click to collapse
I don't know personally, that's why I was asking about those Jigs. I'm just a newb. But now that I know what they do, I'm buying one! LOL!
Here's a link to the post I mentioned above which contains a guide on reloading the Samsung drivers and clearing out device manager....
http://forum.xda-developers.com/showthread.php?t=1982306&page=2
SteveCampsOut said:
I don't know personally, that's why I was asking about those Jigs. I'm just a newb. But now that I know what they do, I'm buying one! LOL!
Click to expand...
Click to collapse
Haha. Ya - Thanks though !
FYI - Airdroid works amazing; just a thought ! :victory:
I'm trying to jump on the S-off bandwagon. I can't seem to get my mac to see the device. I installed HTC sync-it saw it there, then removed program as suggested. I'm not sure if my problem is missing drivers or something in the way I'm trying to start/run adb. I'm trying to follow the instructions on the firewater site. I'm fine up until the point where I need to do the adb part.
sonicshaman said:
I'm trying to jump on the S-off bandwagon. I can't seem to get my mac to see the device. I installed HTC sync-it saw it there, then removed program as suggested. I'm not sure if my problem is missing drivers or something in the way I'm trying to start/run adb. I'm trying to follow the instructions on the firewater site. I'm fine up until the point where I need to do the adb part.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1917237
i had similiar problems plus some , i just setup adb using that guide , get thru that and you should have a idea what your doing
---------- Post added at 05:20 PM ---------- Previous post was at 04:53 PM ----------
plus if any mods see this post is there anyway i can be verified member so that i dont have to type in that stupid verification everytime i post , appreciate it.
commandocon said:
http://forum.xda-developers.com/showthread.php?t=1917237
i had similiar problems plus some , i just setup adb using that guide , get thru that and you should have a idea what your doing
---------- Post added at 05:20 PM ---------- Previous post was at 04:53 PM ----------
plus if any mods see this post is there anyway i can be verified member so that i dont have to type in that stupid verification everytime i post , appreciate it.
Click to expand...
Click to collapse
that helped, still was really hard to figure out-thanks. Using the terminal was hard for me.
So are you good to go,did you get s-off?
sonicshaman said:
I'm trying to jump on the S-off bandwagon. I can't seem to get my mac to see the device. I installed HTC sync-it saw it there, then removed program as suggested. I'm not sure if my problem is missing drivers or something in the way I'm trying to start/run adb. I'm trying to follow the instructions on the firewater site. I'm fine up until the point where I need to do the adb part.
Click to expand...
Click to collapse
Here is a great tutorial for the Mac. Makes it easier to us
http://rk00064.blogspot.com/2012/10/easy-way-to-set-up-adb-and-fastboot-on.html?m=1
My All New One
commandocon said:
So are you good to go,did you get s-off?
Click to expand...
Click to collapse
I did, I guess next quest is permanent root.
how'd you make out sonic all good and done
Im having the exact same problem my terminal sees my device but keeps saying its off line, the phone asked to allow the mac once during my first set up of htc sync, ive uninstalled it, but now thinking the off line problem was my drivers I have tried to reinstall it but now all that does is force close im really stuck right now, gonna need to borrow my gfs pc pretty soon.
Did you get s-off?
I did get s off, not permanent root yet though.
Sent from my HTC6525LVW using Tapatalk