[Q] need help restoring to factory after MIUI on Nook Color - General Questions and Answers

I've installed MIUI on the Nook Color and now would like to restore it back to factory settings, but can't! What am I doing wrong?
I've booted into ClockWorkMod Recovery and did a wipe, but it still boots back into MIUI. I also installed CWM on a microSD and booted into recovery from there to perform a wipe, and still it won't work.
Is there a way to perform the 8 interrupted boots??
Any help is appreciated.

Never mind... I think I figured it out.
I just have to download the complete restore file and restore from that.

Related

Help please phone stuck in Dexter's logo

I have a serious problem! URGENT HELP please.
I did a clean factory because my phone was very slow. I have the V1.3 Dexters, patch 1 and 2, before restoring to factory settings nandroid I made a copy, a copy mybackup pro, and another with Titanium backup pro. After re-establish and restore the backup, everything worked fine, but soon the telephone began again to be slow.
By restoring the factory settings was not sure whether the patches were to be or not, ie had the doubt if I had to install again, well, after restoring the backup, I went into recovery mode and installed the patch again 1 ..... and my phone stopped working, when I restarted indicating left hundreds of sales each of the applications "forced closure."
I tried entering recovery mode to put it back to factory defaults, however it did not work, got stuck on the logo of Dexter's Froy.
When reset to factory mode patches are always installed or I have to reinstall? I ask this because after restoring the backup, would not let me move the applications to the SD, the re-established applications in the phone's internal memory, not the SD (which was before) and I tried to reinstall both patches.
Summary
By restoring the backup, he did everything, but applications that were in the SD, were installed in internal memory.
Newly installed Patch 1 and could not enter, indicating that there was a problem and ought to shut off.
I went into recovery mode, factory settings and was in Dexter's logo. Remove the battery and still remains in the logo.
What I can do now that he has been in the logo?
When restored to factory settings, patches are installed?
Thanks
If restoring your nandroid fails (or yields unsatisfactory results) I would restore a fresh copy of Dexter's 1.3 (Wipe data / Factory reset) & then apply Mioze7Ae's v3 update. Then grab your backup app from the market & restore what's missing.
3rdstring said:
If restoring your nandroid fails (or yields unsatisfactory results) I would restore a fresh copy of Dexter's 1.3 (Wipe data / Factory reset) & then apply Mioze7Ae's v3 update. Then grab your backup app from the market & restore what's missing.
Click to expand...
Click to collapse
Thanks for your answer, the big problem I have is that you get stuck on the logo of Dexters, and pressing the volume key gallery and enters recovery mode, but only gives me three options, apply update, restore to factory data A partition.
I do not know what to do, yes I made a copy before installing nandroid dexter rom, but to apply update tells me there's an error, practically does not let me do anything. I am currently downloading 4.9 and firmware RSDLite USA +. sbf I do not know if that can do something...
Hold in the volume up while turning on the device to get back in to OpenRecovery. I believe the key combinations your trying takes you to Motorola's recovery.
Tavinsky said:
I have a serious problem! URGENT HELP please.
I did a clean factory because my phone was very slow. I have the V1.3 Dexters, patch 1 and 2, before restoring to factory settings nandroid I made a copy, a copy mybackup pro, and another with Titanium backup pro. After re-establish and restore the backup, everything worked fine, but soon the telephone began again to be slow.
By restoring the factory settings was not sure whether the patches were to be or not, ie had the doubt if I had to install again, well, after restoring the backup, I went into recovery mode and installed the patch again 1 ..... and my phone stopped working, when I restarted indicating left hundreds of sales each of the applications "forced closure."
I tried entering recovery mode to put it back to factory defaults, however it did not work, got stuck on the logo of Dexter's Froy.
When reset to factory mode patches are always installed or I have to reinstall? I ask this because after restoring the backup, would not let me move the applications to the SD, the re-established applications in the phone's internal memory, not the SD (which was before) and I tried to reinstall both patches.
Summary
By restoring the backup, he did everything, but applications that were in the SD, were installed in internal memory.
Newly installed Patch 1 and could not enter, indicating that there was a problem and ought to shut off.
I went into recovery mode, factory settings and was in Dexter's logo. Remove the battery and still remains in the logo.
What I can do now that he has been in the logo?
When restored to factory settings, patches are installed?
Thanks
Click to expand...
Click to collapse
I say go clean install here 2.1.1 to 2.2.1 to v3 use Khal's it's Stable and fast!
Use nandroid for back up.
Install apps to EXT partition if you dont want to loose them.
Our setup is too custom to use backup apps.
3rdstring said:
Hold in the volume up while turning on the device to get back in to OpenRecovery. I believe the key combinations your trying takes you to Motorola's recovery.
Click to expand...
Click to collapse
THANKS! Very Grateful! I did what you told me, turn the volume up button and entered into openrecovery, I applied the patch 3, and the phone is working properly. Really very grateful, I was scared, and had already prepared my old palm center.
Greetings!
hellmonger said:
I say go clean install here 2.1.1 to 2.2.1 to v3 use Khal's it's Stable and fast!
Use nandroid for back up.
Install apps to EXT partition if you dont want to loose them.
Our setup is too custom to use backup apps.
Click to expand...
Click to collapse
Thanks for your response, this means that the backups do not apply the applications that are in SD?
The patches remain after reestabler to factory settings?
Now that I have installed the patch 3, if I wanted to restore to factory settings I have to re-install the patches?
Tavinsky said:
The patches remain after reestabler to factory settings?
Now that I have installed the patch 3, if I wanted to restore to factory settings I have to re-install the patches?
Click to expand...
Click to collapse
I think the patch remains in effect after a factory reset, no need to reapply the patch.
Sent from my XT720 using XDA Premium App

[Q] CWM 6.0.1.0 wont factory reset

So I have been using Hyperdrive for a while now and love it.
But my gps doesn't lock on, i know there have been plenty of topics on it.
But i thought that since I was not able to do a complete factory reset that this could be the source of error.
I am using CWM 6.0.1 and every time I try to factory reset my phone it gets stuck on formating /data. It ran all night last night with no prevail.
I have no idea what to do.
I tried to flash TWRP over CWM but cant figure out how to do that either I guess.
I run Ubuntu and have heimdall installed but am missing the proper librarys to factory reset
so I am at a loss and would appreciate any help I can get
Thanks ahead of time
If I were you sir, I would odin back to stock and start over. And you can use ROM Manager to flash CWM, and use Goo manager to flash twrp over CWM, You would not be able to restore a backup of CWM with TWRP and vice versa. Hope this helps.

[Q] CWM Loop in Galaxy P1010

Hello,
Installed CWM to perform a migration out from the factory original Frodo level.
Took a backup with it. When reboot instead of booting again the std Frodo level it keeps booting into the CWM recovery.
Tried to clear the caches.
Tried to download an exitrecovery.zip file (renamed as update.zip, moved into the removable card first and later into the sdcard by using the CWM USB mount), executed successfully but didn't fix the problem.
Restored the backup level performed at the begining, but still boots into CWM.
Any hint or procedure to get rid of it? Even just restoring everything back to factory levels (I'm afraid to do this drastic step and still get the CWM recovery screen when other alternative action might be applicable).
Thanks!!

Help - stuck in CWM

Hi!
Im using sultanxda's CM11. After i backed up using CWM, it wouldn't boot into system. After backing it up, at first i didnt see the reboot into system option. I then tried to pull out the battery but when i turned it on, it would go straight into recovery. I then saw the option to reboot into system option but it didnt work - it just booted back into recovery.
I tried wiping the data/format system and tried restoring the backup but it didnt help.
Any help would be greatly appreciated. Thanks!
I've been searching this forum but I cant find anything.
Would restoring to stock help? Can it even be restored to stock even if i can only access the recovery?
Any help or suggestion would be appreciated. Thanks
notiboy07 said:
I've been searching this forum but I cant find anything.
Would restoring to stock help? Can it even be restored to stock even if i can only access the recovery?
Any help or suggestion would be appreciated. Thanks
Click to expand...
Click to collapse
If you rebooted into recovery, you have no OS installed. If you have an SD card, this will be easy - put a ROM image on it from your PC, then use CWM to flash it. If you don't, you will have to see if CWM has an MTP mode. (I know TWRP does, but I'm not clear if CWM does.)

Xperia mini issue - recovering from boot loop - how to recover data

Ok, so I asked this in XDA Assist but can't post reply there.
This is what happened on my Xperia mini St15i, with firmware 4.1.B.0.587:
1. I turned on Bluetooth and the phone got stuck in infinite boot loop - apparently this is a known bug.
2. I decided to try out CM 9. Installed CWM Recovery and did backup on sd card and flashed CM.
3. I remembered that I did the backup earlier so I thought maybe there is a way to keep my apps and data.
4. I went back to CWM and restored from backup. CM didn't boot then, so I flashed back stock rom with flashtool and booted the phone. The apps and data was there( at least for one app which was very important), but contacts and messages were gone.
So my question is, is there a way to recover ALL user data from the backup? I don't care if it's on stock rom or CM at this point.
I hope some of you knowledgeable people can help!
Many thanks,
Paul
Can someone please help. :crying:
I managed to restore it with all the data by trial and error (I don't know HOW). Then at night the phone lost battery and is back to rebooting forever.
If I restore all via CWM and then flash stock, it boots up saying "Android is upgrading" and then keeps rebooting.
If I do a factory reset via CWM and flash stock rom, the phone is back to factory setting with no data.
WHICH partitions should I recover and which should I flash to retain the data??? HELP :crying:

Categories

Resources