my volume down button broke and i believe its from the motherboard because i don't feel a press anymore. is there anything i can do?
iNikimNoodles said:
my volume down button broke and i believe its from the motherboard because i don't feel a press anymore. is there anything i can do?
Click to expand...
Click to collapse
You can open up the Device and check it yourself. But if you don't know what your doing I would not reccomend it. Best bet is if you have T.E.P. is to take it in, and let Sprint look at it. Just make sure you RUU back to stock, before you take it in.
How can I RUU back to stock with no volume down button to access the boot menu?
iNikimNoodles said:
How can I RUU back to stock with no volume down button to access the boot menu?
Click to expand...
Click to collapse
You can put the RUU Exe. on your PC. Hook the device via USB cable, and run the RUU form the PC.
TEAM MiK
Mik Roms Since 3/13/11
Oh okay would you happen to know where a guide or download for the RUU.exe?
iNikimNoodles said:
Oh okay would you happen to know where a guide or download for the RUU.exe?
Click to expand...
Click to collapse
Here you go.
http://forum.xda-developers.com/showthread.php?t=971550
I would run 2.2 RUU which is available here:
http://www.multiupload.com/15N2D30H6C
Also, take it in to the sprint store and try to have it repaired before you go through TEP, if you don't have TEP, get it.
That is the link to the 2.2 , .93 HBOOT RUU . Would never tell anyone to RUU back to 2.3. Makes no Sense .
prboy1969 said:
That is the link to the 2.2 , .93 HBOOT RUU . Would never tell anyone to RUU back to 2.3. Makes no Sense .
Click to expand...
Click to collapse
Ah word, title said 2.3 so I was confused.
VICODAN said:
Ah word, title said 2.3 so I was confused.
Click to expand...
Click to collapse
All good confuses a lot of people .
Related
Bootloader Progress
You understand by trying anything mentioned in this thread that I, nor anyone else including XDA-Developers will be held responsible for anything that may happen to your device
24/10/10
So far we are able to access the Bootloader via the normal HTC method:
Power Down
Power on holding Volume Down
Click to expand...
Click to collapse
27/10/10
Due to NAND control we aren't able to use ADB in recovery mode. However, we are able to update from update.zip on the SDCARD.
Power Down
Power on holding Volume Down
Select Recovery
Wait for !Triangle
Press Volume Up + Power
Click to expand...
Click to collapse
28/10/10
darrenjdoc is going to download Clockwork Mod and let us know if we are able to load it up.
Its a long shot and probably won't work, but whats the harm in trying
Confirmed not working
29/10/10
Currently looking at extracting the recovery image from the device and rebuilding Clockwork Mod for it.
http://forum.xda-developers.com/showpost.php?p=8889337&postcount=47
Looking to make a GoldCard
http://forum.xda-developers.com/showpost.php?p=8890419&postcount=50
This should enable us to flash an RUU that has a different CID to our own device
09/11/10
Perma/Full Root as been accomplished. Now to crack on with Clockwork Mod
12/11/10
CWM Release imminent
17/11/10
Unofficial Clockwork Mod released by Paul
See:
http://forum.xda-developers.com/showthread.php?t=842819
i wonder what simlock does hmmmm
panyan said:
i wonder what simlock does hmmmm
Click to expand...
Click to collapse
Feel free to try that out. Dont blame me if it bricks your phone though
What happens if you select 'Recovery'? Do you actually get a recovery mode?
AndyCr15 said:
What happens if you select 'Recovery'? Do you actually get a recovery mode?
Click to expand...
Click to collapse
Dunno, but i tried it and I think its wiping my phone lol..
Ive got a phone icon with a ! in it
I think that is recovery mode
Great job! Thanks for experimenting with this
Ahh, isn't that what the Desire used to do? I'm fairly sure it is. Paul O'Brien then figured what file to push and it would load into a decent bootloader. I guess this will be possible at some point again then...
I think your data is safe. I 'think' (but don't know for sure...) pull the battery and boot and you should be fine.
AndyCr15 said:
Ahh, isn't that what the Desire used to do? I'm fairly sure it is. Paul O'Brien then figured what file to push and it would load into a decent bootloader. I guess this will be possible at some point again then...
I think your data is safe. I 'think' (but don't know for sure...) pull the battery and boot and you should be fine.
Click to expand...
Click to collapse
Yep, I pulled the battery out and im back in it
Evostance said:
Dunno, but i tried it and I think its wiping my phone lol..
Ive got a phone icon with a ! in it
I think that is recovery mode
Click to expand...
Click to collapse
Yup, same as desire. Hold the volume up for 3 secs then tap the power allows for a custom recovery via update.zip? Clockwork time
subz85 said:
Yup, same as desire. Hold the volume up for 3 secs then tap the power allows for a custom recovery via update.zip? Clockwork time
Click to expand...
Click to collapse
You mean volume up and power button.
I'm not sure if clockwork works trough this recovery tho, adb should have root access I guess.
edit: a friend of mine had a HD, lets see if we can brick it. But first research what others already know about the G2 and what this eMMC is...
Ummm just gave me
does G2 do all this already? just wondering if this is a clue whether this is way around NAND lock on desire HD that may not be available on g2
We just need a S-Off version
xmoo said:
We just need a S-Off version
Click to expand...
Click to collapse
And a way to get it to the phone
xmoo said:
We just need a S-Off version
Click to expand...
Click to collapse
And how would we do that
http://forum.xda-developers.com/showthread.php?t=805811
??
Find a full RUU of 0.06 test, 1.01 test or 1.04 test.
With a S-OFF we can full root the phone? Just a noob question, trying to understand what lock HD have... also all HDs come with that? i have read that just T-Mobile have this.
xmoo said:
Find a full RUU of 0.06 test, 1.01 test or 1.04 test.
Click to expand...
Click to collapse
You think S-ON bootloader would allow flashing test and older versions of ROMs?
No but mayb edit it so we can flash the s-off bootloader like the Desire
Eddie1506 said:
You think S-ON bootloader would allow flashing test and older versions of ROMs?
Click to expand...
Click to collapse
Sent from my Desire HD using XDA App
Didn't you post the test roms on here xmoo?
http://alpharev.nl/x/beta/
If you have another hboot, you are SOL without upgrading to hboot 1.02.0000
attn1 said:
http://alpharev.nl/x/beta/
If you have another 1.x hboot, you are SOL without upgrading to the ATT 2.2.2 RUU.
Click to expand...
Click to collapse
sweetness.
worked for me
Sooooo tempted to flash OTA 2.2 just to use this to s-off. Somebody try it on the .57 bootloader to see if it works for s-off!
unsivil_audio said:
Sooooo tempted to flash OTA 2.2 just to use this to s-off. Somebody try it on the .57 bootloader to see if it works for s-off!
Click to expand...
Click to collapse
says only supports 1.02
Strange, you would think an exploit in 1.02 would also exist in anything earlier and could be utilized.
unsivil_audio said:
Sooooo tempted to flash OTA 2.2 just to use this to s-off. Somebody try it on the .57 bootloader to see if it works for s-off!
Click to expand...
Click to collapse
I got .057 on mine ... was holding off on pushing the upgrade ... but I guess its time to get the hboot up to specs
katz said:
I got .057 on mine ... was holding off on pushing the upgrade ... but I guess its time to get the hboot up to specs
Click to expand...
Click to collapse
i would hold off until official but who knows
i updated just for this, i was told it only supports 1.02
So, in theory...you could nandroid back up your CM7, update to 2.2.2 and then S-OFF and then nandroid restore your CM7 back up?
zervic said:
So, in theory...you could nandroid back up your CM7, update to 2.2.2 and then S-OFF and then nandroid restore your CM7 back up?
Click to expand...
Click to collapse
what i did
I pulled the trigger and upgraded with RUU to get HBOOT 1.02.0000, but alas, now I'm stuck. It hangs at "Acquiring root (method 1)..."
Oh Well. Hope they get a newer beta soon. Can't mess with my Aria now.
Gene Poole said:
I pulled the trigger and upgraded with RUU to get HBOOT 1.02.0000, but alas, now I'm stuck. It hangs at "Acquiring root (method 1)..."
Oh Well. Hope they get a newer beta soon. Can't mess with my Aria now.
Click to expand...
Click to collapse
was done for me in about 5 seconds?
sorry
drowningchild said:
what i did
Click to expand...
Click to collapse
Roger...looks like i'll have to get a Live CD made and get this tonight...need to find directions for updating to 2.2.2 :s
I did a RUU update and when I got back to the channel window BETA WAS CLOSED ...
told you to hold off
OK, reran from my gentoo box instead of my ubuntu VM and it worked. I'm a little annoyed that it says ---AlphaRev--- at the top of HBOOT. Won't make it easy to slip by the att warranty desk.
Well this sucks, I missed it. Now lets wait another month for the actual release lol...
Gene Poole said:
OK, reran from my gentoo box instead of my ubuntu VM and it worked. I'm a little annoyed that it says ---AlphaRev--- at the top of HBOOT. Won't make it easy to slip by the att warranty desk.
Click to expand...
Click to collapse
So what's to stop you from flashing the stock 2.2.2 RUU to return it - erasing the aplharev hboot?
attn1 said:
So what's to stop you from flashing the stock >>>>2.2.2<<<< RUU to return it - erasing the aplharev hboot?
Click to expand...
Click to collapse
Oh - two two twain - Truman Capote.
Get it?
attn1 said:
So what's to stop you from flashing the stock 2.2.2 RUU to return it - erasing the aplharev hboot?
Click to expand...
Click to collapse
Tried that. Shows all the images then shows "Bypassed" next to hboot and some message scrolls by like "cannot roll back hboot image" or something like that.
My phone's flex cable is damaged some how and I need to unroot it and turn s-on, anyone able to give me some helpful links? I searched and not sure if anything I found was still viable to use.
I am running 2.3 and have updated radio.
Just run the ruu. You can get the 2.2 ruu from the hboot downgrade thread or the 2.3 here http://forum.xda-developers.com/showthread.php?t=1335068
Sent from my PG06100 using Tapatalk
Thanks, to add to it, my screen now won't come on at all, any one can give me a bit of step by step?
Will the screen come on while in bootloader or it doesn't work at all? Either way, as long as your pc will recognize the phone you should be able to run the RUU exe. Just plug in your phone with it powered on and run the RUU on your pc.
Will that turn my s-off to s-on also?
gigermunit said:
Will that turn my s-off to s-on also?
Click to expand...
Click to collapse
Yup, the RUU will bring you completely back to stock with s-on.
crump84 said:
Yup, the RUU will bring you completely back to stock with s-on.
Click to expand...
Click to collapse
Thank you, I hope this works fine, friend is taking me to the store tomorrow to get it checked to see if they can put in a new cable or send me a new phone, if they tell me any bull I am raising hell, I have taken care of this phone like a new born since I got it and then **** happens.
gigermunit said:
Thank you, I hope this works fine, friend is taking me to the store tomorrow to get it checked to see if they can put in a new cable or send me a new phone, if they tell me any bull I am raising hell, I have taken care of this phone like a new born since I got it and then **** happens.
Click to expand...
Click to collapse
Haha. Well good luck man.
Getting a free replacement so all was well.
my htc one x is with rogers.
yesterday i unlocked my htc, and tried to root it by using the one click root tool
it said success but after rebooting , it stuck at the loading screen with security warning in red " this build is for development ......"
i tried to use ruu to flash PJ83IMG, but at the upgrade selection, it says my img version is 1.94, and the upgraded one is 1.73(or 1.83, i forgot)
i clicked upgrade anyway. i didn't work.
also i tried the ARUWIZARD, it didn't work as well.
plz help me , i just want to get this phone back to working.
any help would be appreciated.
thx for reading
forgot to say that i did relock it.
kongfutoufu said:
my htc one x is with rogers.
yesterday i unlocked my htc, and tried to root it by using the one click root tool
it said success but after rebooting , it stuck at the loading screen with security warning in red " this build is for development ......"
i tried to use ruu to flash PJ83IMG, but at the upgrade selection, it says my img version is 1.94, and the upgraded one is 1.73(or 1.83, i forgot)
i clicked upgrade anyway. i didn't work.
also i tried the ARUWIZARD, it didn't work as well.
plz help me , i just want to get this phone back to working.
any help would be appreciated.
thx for reading
forgot to say that i did relock it.
Click to expand...
Click to collapse
DId you use SuperCID? you should just try different ruu until one of them works. Did you try to get into recovery aka holding down the vol button when you power on?
drklazarus26 said:
DId you use SuperCID? you should just try different ruu until one of them works. Did you try to get into recovery aka holding down the vol button when you power on?
Click to expand...
Click to collapse
i dont know what is SuperCID so i guess i didn't use it.
recovery is the only thing that i can get into right now.
i tried factory reset. didn't work.
im quite new to android so i dont know too many things.
thx for reading and replying.
kongfutoufu said:
i dont know what is SuperCID so i guess i didn't use it.
recovery is the only thing that i can get into right now.
i tried factory reset. didn't work.
im quite new to android so i dont know too many things.
thx for reading and replying.
Click to expand...
Click to collapse
Well if you didnt that means you can only use an ruu for the image you currently have or any ruu after after that. im not to familiar with rogers ruu version numbers but like i said equal or great. I would go into recovery and and go into fastboot and try the ruu then. that should do the trick and you still need to be relocked but you said you did that already so good luck!
drklazarus26 said:
Well if you didnt that means you can only use an ruu for the image you currently have or any ruu after after that. im not to familiar with rogers ruu version numbers but like i said equal or great. I would go into recovery and and go into fastboot and try the ruu then. that should do the trick and you still need to be relocked but you said you did that already so good luck!
Click to expand...
Click to collapse
thx, but i still dont understand how to do it.
can u plz tell me the detail?
what files do i need ? or is there a thread that can help me through the process ?
btw, there is no equal or greater ruu, i searched it , found a few thread asking the same thing but no result.
kongfutoufu said:
thx, but i still dont understand how to do it.
can u plz tell me the detail?
what files do i need ? or is there a thread that can help me through the process ?
btw, there is no equal or greater ruu, i searched it , found a few thread asking the same thing but no result.
Click to expand...
Click to collapse
yeah it seems like you did take all steps. with changing your CID im not really sure what to do. illl be back if i find anything but right now im stuck. sorry man.
drklazarus26 said:
Yeah I was just looking around and I noticed there but only one ruu. this is a link to the ruu ROGER RUU. its an exe so basically hold the vol down button while you turn the power on. you should have a screen that says "fastboot", recovery and so on. select fastboot and connect to your computer. when it finishes installing the drivers and the phone says fastboot usb in red then run the ruu.
actually its not an exe. sorry i need to look it up myself
Click to expand...
Click to collapse
yeah, that is not an exe file. it's a zip file that should replace the rom.zip when u do the ruu (according to the posts online).
that's what i did. the thing is that when i did the ruu thing, my phone version is greater then the one u can find online. so it's not working this way. or maybe im not doing it right.
this phone is killing me right now.
thank u.
no one seems to have a good solution to this???
i just solved it.
it's quiet simple actually.
for ppl who may have the same problem as i did , this is what u need to do :
flash recovery, then go in to recovery mode, wipe everything, except the external storage, then install a new rom
simple...
yea , first of all , unlock ur device.
thx/.
Should change the title of post from [Q] to [solved] so that people know your all set and others that may find the info useful.
Sent from my Nocturnalized One XL using Forum Runner
i have an htc inspire 4g. messed up on installing a custom rom. if i hold down vol - and power it wont go into boot loader. if i do the vol + power it does the qualcom thing. i can plug it up to my pc, and after a minute or so it recognizes it as the memory card. if i push both vol buttons and power i get it to vibrate 5 times and a green light. ive tried several diffrent things found here and a few other places. is there still a chance i can fix my phone or is it dead.....
any help appreciated....
What did you do exactly?
i tried to put a stock rom on it. but i think it didnt like it. now it dont work.
KAHNEFAN said:
i have an htc inspire 4g. messed up on installing a custom rom. if i hold down vol - and power it wont go into boot loader. if i do the vol + power it does the qualcom thing. i can plug it up to my pc, and after a minute or so it recognizes it as the memory card. if i push both vol buttons and power i get it to vibrate 5 times and a green light. ive tried several diffrent things found here and a few other places. is there still a chance i can fix my phone or is it dead.....
any help appreciated....
Click to expand...
Click to collapse
KAHNEFAN said:
i tried to put a stock rom on it. but i think it didnt like it. now it dont work.
Click to expand...
Click to collapse
Where you S-OFF or have unlocked the bootloader? what custom rom? You were trying to flash a custom rom or a stock one??
KAHNEFAN said:
i tried to put a stock rom on it. but i think it didnt like it. now it dont work.
Click to expand...
Click to collapse
Like, a Froyo RUU maybe...? If not I reiterate glevitan's questions.
bananagranola said:
Like, a Froyo RUU maybe...? If not I reiterate glevitan's questions.
Click to expand...
Click to collapse
MissB, be ready to the froyo attack now that Hack Kit is gone!! :laugh:
i tried to put the stock rom that came on my phone back on it. i had it rooted and was using it for straight talk. the rom was the original on shipped with the phone new. not and updated version. i know i messed up. i cant get the phone into bootloader, the power button does nothing, volume up and power takes it to the qual comm thing. if i plug it up to my computer it takes it a few minutes to recognize it as a disk drive. but it will.
KAHNEFAN said:
i tried to put the stock rom that came on my phone back on it. i had it rooted and was using it for straight talk. the rom was the original on shipped with the phone new. not and updated version. i know i messed up. i cant get the phone into bootloader, the power button does nothing, volume up and power takes it to the qual comm thing. if i plug it up to my computer it takes it a few minutes to recognize it as a disk drive. but it will.
Click to expand...
Click to collapse
Where did you get the stock ROM? What version of Android did your phone have when shipped?
i had ics on it before i tried to downgrade. i downloaded the stock rom from another site. it was the original stock rom no ota updates i believe. i dont remember the android version.
KAHNEFAN said:
i had ics on it before i tried to downgrade. i downloaded the stock rom from another site. it was the original stock rom no ota updates i believe. i dont remember the android version.
Click to expand...
Click to collapse
You haven't clarified whether it was a ROM or RUU, where you got the file, or whether your phone was shipped with Gingerbread. That is important information. I think at this point I'm going to assume you flashed a Froyo RUU on a phone shipped with Gingerbread.
bananagranola said:
You haven't clarified whether it was a ROM or RUU, where you got the file, or whether your phone was shipped with Gingerbread. That is important information. I think at this point I'm going to assume you flashed a Froyo RUU on a phone shipped with Gingerbread.
Click to expand...
Click to collapse
sorry. the one that messed me up was an ruu exe file. im not sure on the gingerbread. ive had the phone for a year now. ive changed the os about 5 or 6 times no problem.
KAHNEFAN said:
sorry. the one that messed me up was an ruu exe file. im not sure on the gingerbread. ive had the phone for a year now. ive changed the os about 5 or 6 times no problem.
Click to expand...
Click to collapse
It was new a year ago? Yeah, you flashed a Froyo RUU on a phone shipped with GB. That messes your bootloader. glevitan has a guide that has, among other things, instructions on how to fix that, but given that AAHK has been retired I don't know if the files to fix it are still available.
bananagranola said:
It was new a year ago? Yeah, you flashed a Froyo RUU on a phone shipped with GB. That messes your bootloader. glevitan has a guide that has, among other things, instructions on how to fix that, but given that AAHK has been retired I don't know if the files to fix it are still available.
Click to expand...
Click to collapse
ok. if i have the aahk just use it and follow glevitan's guide. and i have a chance to fix it...
KAHNEFAN said:
ok. if i have the aahk just use it and follow glevitan's guide. and i have a chance to fix it...
Click to expand...
Click to collapse
AAHK is retired. The server hosting the files it pulls from may very well be gone. And it's not AAHK itself that will fix it anyway; it's just instructions by AAHK's author using files hosted on AAHK's site. It's not included in the AAHK itself.
AAHK has a ton of very clear warnings saying NOT to flash a Froyo RUU on a phone shipped with GB. I would strongly advise that you read more closely next time. You will need to wait for glevitan to show up and see if he can help.
ok. thanks for the help.
KAHNEFAN said:
ok. thanks for the help.
Click to expand...
Click to collapse
any luck yet?