Database Info

[Q] lost password / New SD Card

Ok so my brother bought this I believe to be an Inspire 4g from someone on Craigslist, he said she showed it to him and everything was fine.
When he got it home the password screen was on and he couldnt get into it.
I had him try removing the battery and then going into the HBOOT screen and doing factory restore, when this happens it vibrates once then 7 times really quick and stays on the HTC screen. I checked and he doesn't have the SD Card that came with the phone. I gave him one of mine that was formatted to fat32, then when he booted it there is a couple folders on it from the phone but still unable to set it back to defaults. Would I be able to put a factory image on the SD Card and do a restore? If so where can I find a factory image? I don't belive this phone has been rooted yet so it would have to be a AT&T image. Someone please advise, also before you say email her for the password, she wont respond idk if she did this on purpose or what.

Search for the stock ruu, version 1.80 and try running that if you don't want to root.
Sent from my Inspire 4G using Tapatalk

I dont mind rooting it but as far as using RUU none of them will recognize phone because the settings are for USB to be charge only and I cannot get past the pin code screen to change it.
Is it possible to get a stock image, put it on the SD card and change it like that?
Or how can I root it without access to install anything on it?

Can you get it into HBOOT? You can install a stock ROM as a PD98IMG.zip, but you need to be able to get into HBOOT. Try pulling the battery for a few minutes, then hold VOL-UP and hit POWER to get to HBOOT.
Try here for the image file:
http://forum.xda-developers.com/showthread.php?t=952224
Near the bottom: "STOCK ROM IN ZIP FORMAT"

I can get it to this screen
(not my image but similar)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I just put the whole zip on the SD card?

jjackson81281 said:
I can get it to this screen
(not my image but similar)
I just put the whole zip on the SD card?
Click to expand...
Click to collapse
Yes put the whole zip in the SD card. Do not unzip it. Boot into that screen and it'll ask you if youwant to apply the file just say yes
No Hay de Queso No Mas de Papa

awesome, ill give it a shot after work this evening. Thanks!!

no dice, it went through the process (failed first time on user data so i ran it again and it was successful) then it said push power button to reboot, it vibrates 7 times then stays on the screen that just says HTC, eventually i removed the battery and powered up to find the stupid password screen still there, tried doing factory reset again and same thing 7 vibrations and htc screen indefinitly. Any other ideas or image files i could try???

If it is worth anything to know
ACE PVT SHIP S-ON RL
HBOOT-0.85.0019
MICROP-0483
RADIO-26.06.04.06_M
eMMC-boot
Dec 27 2010,14:47:30

The pd98img file should have wiped everything, not sure how the password remained.
Idk maybe try the file again, thirds time the charm.
The only other file I can think of is the gingerbread ruu leak
No Hay de Queso No Mas de Papa

will that work even though I'm not rooted?

Its completely stock, so your fine. Its the update that inspires are suppose to get anyday now. I just have to figure out how to pullthe pd98img zip from the ruu.
I think it puts it in a temp folder somewhere when you run the ruu. Hopefully I can find it, or someone already has it pulled for you
No Hay de Queso No Mas de Papa

so the RUU worked except now when I boot it up .... SAME THING! still asking for password. Same background, nothing has changed!

i ran the ruu again and it says it still has the old version on it wtf?

ok im stumped!!!
you ran the gingerbread RUU?
ive seen this one other time where running the PD98img files said it flashed but it still said the old one. Unfortunately we never got an answer to that

Yea the one on HTC's site fr e the desire failed but the one here worked
http://driphter.com/index.php?topic=3872.0
but once it completed and tries to reboot the phone it vibrates seven times and freezes on the HTC screen again.
I manually remove battery to reboot and back to square one.
Ive tried it both with sd card in and out.
marsdta said:
ok im stumped!!!
you ran the gingerbread RUU?
ive seen this one other time where running the PD98img files said it flashed but it still said the old one. Unfortunately we never got an answer to that
Click to expand...
Click to collapse

EDIT- heres is the link to the gingerbread PD98IMG
http://www.multiupload.com/P13PZJ2JBN
try this one, and see if this one works

same deal, update complete, press power to reboot. Vibrate once, HTC screen vibrates 7 times and freezes. Remove battery, battery in, power on, same password screen it boots to.
I hate to tell my brother he got ripped off but it is starting to look that way.

Can you upload some sort of video of you trying to go through the process, for us to see if you are making any errors?
Sent from my HTC Desire HD using XDA Premium App

No best I can do is walk through word for word, I'm not new to this by any means I've had a fuse and a tilt 2 that I've unlocked and put custom ROM's on, as well as jailbreaking an Iphone.
So here is what is going on.
Ive done this step with and without SD card in.
1) Removed battery
2) Placed battery back in
3)held down vol, and power until the HBOOT screen comes on.
My options are recovery, factory reset, sim lock, crc img or whatever
4) Vol down to Factory Reset
5) phone reboots with a vibrate like normal, then vibrates 7 times and stays on the HTC screen (white with green letters) until either phone dies or I remove battery.
6) reboot it hoping the factory reset took and no back to the lock screen
-----------------------------------
Didnt work that way lets try putting either the factory image or the updated gingerbread version on!
1) Download the PD98img.zip file
2) put Micro SD card in laptop and format to FAT32
3) move PD98IMG.zip file to the freshly formatted Micro SD Card
4) Remove battery from Phone
5) Put Micro SD card in phone
6) Put Battery in phone
7) Hold down Vol Down and Power Buttons
8) HBOOT Screen appears then checks for PD98IMG.IMG, .nbh, .zip
9) Hboot checks PD98IMG.zip
10) This will update blah blha continue press Vol Up for yes
11) Now with the Gingerbread update it was successful every time, with the factory image it would fail then work the next time.
12) Update Complete press Power to reboot
13) PRess Power
14) reboots, vibrates, HTC screen, Vibrates 7 times and freezes
15) remove battery
16) boot it back up
17) Lock Screen again with this awful goddamn red wallpaper!!

[Q] Phone is partially bricked...?

Hey guys,
I think my phone is partially bricked. I know that sounds weird, but here's the situation:
I was able to unlock my bootloader (faced multiple write errors using fastboot but it did unlock eventually), I can't reflash using Odin (it fails Error is "Complete Write Fail"), when I tried to format some partitions using clockwork I get:
E: format_volume: make_extf4fs failed on /dev/block/platform/s3c-sdhci.0/by-name/system
Error formatting /system!
No linux newb here, so I'm guessing my internal partition is fubared..
Here's what's funny... I can flash a rom and boot into the rom usually on the first try. If I boot into the rom, it runs fine until I reboot the phone. Then it takes another *LITERALLY* 10 times of pulling the battery and rebooting the phone because the phone sticks at the Google boot logo. I can boot into recovery, fastboot, no problem.
As my phone sits right now: I can flash clockwork, bootloader unlocked. I'm having to try the NAND restore to 2.3.1 to get it to work. I rebooted the phone multiple times, no problems but then after a phone call...get a notification that the sd card was suddenly removed and now I'm back to square one..
Does anyone have a clue as to why my phone decided to unmount the internal storage and why I can't get this thing to work correctly 100%?
Thanks guys..
Btw, I usually can't mount the USB storage using clockwork when I get these errors. I have to keep rebooting the phone until I get lucky enough to format the /sdcard, then try and mount it up to my computer.

Just rebooted the phone, flashed /system, and mounted up the USB..
Can anyone explain this??

otisranson said:
Hey guys,
I think my phone is partially bricked. I know that sounds weird, but here's the situation:
I was able to unlock my bootloader (faced multiple write errors using fastboot but it did unlock eventually), I can't reflash using Odin (it fails Error is "Complete Write Fail"), when I tried to format some partitions using clockwork I get:
E: format_volume: make_extf4fs failed on /dev/block/platform/s3c-sdhci.0/by-name/system
Error formatting /system!
No linux newb here, so I'm guessing my internal partition is fubared..
Here's what's funny... I can flash a rom and boot into the rom usually on the first try. If I boot into the rom, it runs fine until I reboot the phone. Then it takes another *LITERALLY* 10 times of pulling the battery and rebooting the phone because the phone sticks at the Google boot logo. I can boot into recovery, fastboot, no problem.
As my phone sits right now: I can flash clockwork, bootloader unlocked. I'm having to try the NAND restore to 2.3.1 to get it to work. I rebooted the phone multiple times, no problems but then after a phone call...get a notification that the sd card was suddenly removed and now I'm back to square one..
Does anyone have a clue as to why my phone decided to unmount the internal storage and why I can't get this thing to work correctly 100%?
Thanks guys..
Btw, I usually can't mount the USB storage using clockwork when I get these errors. I have to keep rebooting the phone until I get lucky enough to format the /sdcard, then try and mount it up to my computer.
Click to expand...
Click to collapse
otisranson said:
Just rebooted the phone, flashed /system, and mounted up the USB..
Can anyone explain this??
Click to expand...
Click to collapse
yup, this ones explainable. classic symptoms of a ns with its internal sd card dying/dead. it happens way too often unfortunately. luckily its a fairly easy and inexpensive repair, if youre not under warranty.

Any direction on how to fix it while not under warranty?
Or take it to tmobile?

otisranson said:
Any direction on how to fix it while not under warranty?
Click to expand...
Click to collapse
check out any local mobile device repair shops. you could probably do it yourself if you dont fear taking the phone apart, it should be to difficult of a repair. its just a matter of buying a replacement(ebay?), taking the phone apart, and replacing the sd.

Found this breakdown, but I don't see where the internal storage is..
http://www.ifixit.com/Teardown/Nexus-S-Teardown/4365/1

I've been having similar issues..what is the exact part name for the SD?...I wanna search to buy one
Sent from my Nexus S 4G using XDA Premium App

I think its:
Samsung KB100D00WM-A453 memory package and S5PC110A01 1GHz Cortex A8 Hummingbird Processor.
I'm going to try to find another nexus s mother board as a whole, that's my only option.

otisranson said:
Found this breakdown, but I don't see where the internal storage is..
http://www.ifixit.com/Teardown/Nexus-S-Teardown/4365/1
Click to expand...
Click to collapse
I think it's in step 10

i seen something a few weeks ago online on how to replace this...it was a video..i just cant remember where i seen it!

I ended up just purchasing a new phone on ebay.. If I find a nexus s with a cracked screen, I will swap out the mobo.

You can check whether there are blocks flagged as bad by FTL (Flash Translation Layer) in recovery. Check recovery.log file (it can be, the bad blocks will show up after formats).

soft brick plus phone not recognised by adb

--------------------------------------------------------------------------------
M new to android. Bought this HTC one s T-Mobile which is rooted and runs cm10 and and android 4.1.2. I have updated it to 10-20121012-nightly-villw in d hope that the WiFi tethering would work. Well it never did. But that is not my prob right now.
I tried a hard reset from bootloader screen and now it says safe to remove SD card. I installed SDK ADT bundle. But the command 'ADT devices ' returns blank. Does not recognise my phone. I downloaded all in one kit and also installed htc drivers given on the same post. Even all in one kit does not recognise my phone. Says device not found. M running vista home premium. I have followed all d steps like putting d phone in debug mode. M I missing something. Pl help. M really stuck now.

sadrulez said:
--------------------------------------------------------------------------------
M new to android. Bought this HTC one s T-Mobile which is rooted and runs cm10 and and android 4.1.2. I have updated it to 10-20121012-nightly-villw in d hope that the WiFi tethering would work. Well it never did. But that is not my prob right now.
I tried a hard reset from bootloader screen and now it says safe to remove SD card. I installed SDK ADT bundle. But the command 'ADT devices ' returns blank. Does not recognise my phone. I downloaded all in one kit and also installed htc drivers given on the same post. Even all in one kit does not recognise my phone. Says device not found. M running vista home premium. I have followed all d steps like putting d phone in debug mode. M I missing something. Pl help. M really stuck now.
Click to expand...
Click to collapse
Does QHSUSB_DLOAD appear in device manager?

I looked up d device manager could not find anything like this. Anywhere specific I need to look at ?

sadrulez said:
--------------------------------------------------------------------------------
M new to android. Bought this HTC one s T-Mobile which is rooted and runs cm10 and and android 4.1.2. I have updated it to 10-20121012-nightly-villw in d hope that the WiFi tethering would work. Well it never did. But that is not my prob right now.
I tried a hard reset from bootloader screen and now it says safe to remove SD card. I installed SDK ADT bundle. But the command 'ADT devices ' returns blank. Does not recognise my phone. I downloaded all in one kit and also installed htc drivers given on the same post. Even all in one kit does not recognise my phone. Says device not found. M running vista home premium. I have followed all d steps like putting d phone in debug mode. M I missing something. Pl help. M really stuck now.
Click to expand...
Click to collapse
Your description is confusing to me. Your thread title says it is softbricked but then you say that you put the phone in debug mode? Does your rom boot fully?
Are you trying to toolkit from the Rom, bootloader or fastboot?

If you typed adt devices it won't show anything lol
Sent from my HTC VLE_U using xda app-developers app

Spastic909 said:
If you typed adt devices it won't show anything lol
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
Sorry I meant adb devices. I thought the SD card error means soft brick. Sorry for my ignorance. M able to boot and use my phone. Just that sd card won't work and I am not able to connect to adb or all in one kit to fix my issue. I tried connecting after normal boot and from recovery mode and even from boot loader screen. No luck with either of them.

I had an issue with softbricking my phone. A good last resort is to flash the RUU (thats what i was told to do and it worked like a charm). It will totally reset your phone to factory settings...and you will need to re-lock your bootloader (just use the All-In-One Toolkit) but besides that, you will once again have a working phone and can just re-root it. If you need the RUU file I can supply the link to it with a little bit of searching. Good Luck!

sadrulez said:
Sorry I meant adb devices. I thought the SD card error means soft brick. Sorry for my ignorance. M able to boot and use my phone. Just that sd card won't work and I am not able to connect to adb or all in one kit to fix my issue. I tried connecting after normal boot and from recovery mode and even from boot loader screen. No luck with either of them.
Click to expand...
Click to collapse
Everyone's so ready to have a guy run a RUU. Even if he did that it he still would be stuck.
If the toolkit isn't working then you have done something wrong.
Check in device manager and look if you see a category that says "android usb devices"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If it's not there you don't have the driver installed correctly. If it is there, double check that you have developer options enabled. In the develop options menu check for something that say enable android debugging.
While you phone is booted normally, plug it into your computer. Can you see something in the notification area that says something about debugging mode?
If you got all that done is the toolkit still not working?

I recommend using a Windows 7 PC to install HTC Sync, then copying the folder to your computer. Then install the drivers manually through device manager, selecting the previous folder that you copied. The drivers should detect your phone then.
@dc211 I can't believe your still using XP lol
Sent from my HTC One S using Tapatalk 2

I connected my phone to a Windows 7 computer and it recognised my phone.
I downloaded All-in-One.
I did not know what is flashing stock recovery. So here is what I did :
I flashed CWM 5.8.3.1(S4).
Then i booted in bootloader and did 'clear storage'. then i did wipe data/factory reset
then i reflashed CWM 5.8.3.1(s4)
Now my phone goes directly into cwm recovery screen automatically.
My SD card still does not mount.
when i try to get into bootloader using All-in-one kit it keeps saying 'waiting for device' on the computer screen and the phone reboots and goes back to CWM recovery screen.
As you are aware there is no removable battery in this phone. I am stuck now. If I hold down the power and Vol down button for as long as one minute nothing happens. Phone eventually comes back to CWM recovery screen.
I tried everything possible from CWM recovery screen. Wiped cache/dalmik cache. Format system/data. Cant format SD card it says unable to mount.
Please HELP !!

sadrulez said:
I connected my phone to a Windows 7 computer and it recognised my phone.
I downloaded All-in-One.
I did not know what is flashing stock recovery. So here is what I did :
I flashed CWM 5.8.3.1(S4).
Then i booted in bootloader and did 'clear storage'. then i did wipe data/factory reset
then i reflashed CWM 5.8.3.1(s4)
Now my phone goes directly into cwm recovery screen automatically.
My SD card still does not mount.
when i try to get into bootloader using All-in-one kit it keeps saying 'waiting for device' on the computer screen and the phone reboots and goes back to CWM recovery screen.
As you are aware there is no removable battery in this phone. I am stuck now. If I hold down the power and Vol down button for as long as one minute nothing happens. Phone eventually comes back to CWM recovery screen.
I tried everything possible from CWM recovery screen. Wiped cache/dalmik cache. Format system/data. Cant format SD card it says unable to mount.
Please HELP !!
Click to expand...
Click to collapse
Try holding volume down and power. Out should boot into the bootloader.
Sent from my HTC One S using Tapatalk 2

I already tried that. Holding vol button down + power button restarts the phone in CWM recovery mode

i tried it least 20 times and was finally able to get the phone to boot to bootloader mode
can you guide me to the next set of steps ..
I am totally relying on this forum at the moment.

sadrulez said:
i tried it least 20 times and was finally able to get the phone to boot to bootloader mode
can you guide me to the next set of steps ..
I am totally relying on this forum at the moment.
Click to expand...
Click to collapse
Run an RUU, whichever suits your CID /bootloader version.
Sent from my HTC One S using Tapatalk 2

[Q] [4.4.2] Nexus 5 stuck on boot

I'm not sure what info is relevant here so I'll just include everything I can think of.
I was on 4.4 until about 12 hours ago, when I got the update notification for 4.4.2. I am completely stock and have no provider at the moment while I wait for my contract w/verizon to expire. The phone was working fine for the past 11 hours.
My phone was at about 60% and working fine when I tried to install the facebook app. Upon opening the app, the phone went black/unresponsive. I plugged it in and tried to hard reset it-- the google logo would show up but nothing else for 5~10 minutes when I would try to restart the phone. If I pressed the power button down for ~10 seconds, the screen would blink off, but then immediately turn on again to the google logo screen without me pressing the button to turn it back on.
After about 20 minutes of this, I went into bootloader and tried a factory reset. It finished really fast and I clicked the option for reboot. The phone didn't reboot, though, and was frozen.
I hard rebooted and was able to get past the google screen and the 4 colored dots showed for about 10 seconds, and then froze. I hard reset again, and tried wiping the cache. This is the message I am seeing now:
Erasing...
E: Error in /cache/recovery/log
(Read only file system)
E: Can't open /cache/recovery/last_log
E: Can't open /cache/recovery/last_install
-- Wiping Cache...
E: Failed to mount /cache (Invalid argument)
Formatting /cache...​
And it's been like that for half an hour. I don't know if it's actually doing something, the blue completion bar isn't updating and looks frozen.
If you have any advise on how I can restore my phone to working condition, I'd be really grateful. Thanks!

So your on a stock ROM? Seems like you were in a boot loop and then you did something that erased your internal card. (That's what it sounds like anyways) Its not a big issue tho, you can fix it. You have no root what so ever right? If yes. Then just flash a stock ROM through the BOOTLOADER. There is a tutorial for that on the website.
BTW did your Recovery look like this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Fulbring said:
So your on a stock ROM? Seems like you were in a boot loop and then you did something that erased your internal card. (That's what it sounds like anyways) Its not a big issue tho, you can fix it. You have no root what so ever right? If yes. Then just flash a stock ROM through the BOOTLOADER. There is a tutorial for that on the website.
BTW did your Recovery look like this?
Click to expand...
Click to collapse
Yes, it looks exactly like that. I will try to flash a stock rom like you said in the morning. Thanks for the reply!

colia said:
Yes, it looks exactly like that. I will try to flash a stock rom like you said in the morning. Thanks for the reply!
Click to expand...
Click to collapse
Cool. So that option that says "Apply update through ADB" side load the stock ROM through that using ADB again and you should be fine!

Fulbring said:
Cool. So that option that says "Apply update through ADB" side load the stock ROM through that using ADB again and you should be fine!
Click to expand...
Click to collapse
Okay, I'm having some problems. I tried to side load image-hammerhead-krt16m.zip with the command in command prompt:
[adb sideload image-hammerhead-krt16m.zip]
It sent successfully, but I have a lot of error messages on my phone:
http: i.imgur.com/xqZ0K5k.jpg
The important one seems to be
"Failed to set up expected mounts for install; aborting
Installation aborted"
And when I restart and try to boot, it gets to the animated dots and doesn't progress from there. When I go back into recovery, it still says [KOT49H] so I don't think sideloading worked.

Are you sideloading Android 4.4.2? If yes, then your doing it wrong. You have to load 4.4 on it, you should erase everything first and then do a clean load. I think there are some files that are corrupt preventing from the current sideload from working.
Sent from my Nexus 5 using XDA Premium 4 mobile app

Fulbring said:
Are you sideloading Android 4.4.2? If yes, then your doing it wrong. You have to load 4.4 on it, you should erase everything first and then do a clean load. I think there are some files that are corrupt preventing from the current sideload from working.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No, I'm loading [image-hammerhead-krt16m.zip] which is supposed to be 4.4 that I got from developers.google.com/android/nexus/images#hammerhead

colia said:
No, I'm loading [image-hammerhead-krt16m.zip] which is supposed to be 4.4 that I got from developers.google.com/android/nexus/images#hammerhead
Click to expand...
Click to collapse
Can you boot into fastboot?
If so, follow this guide (make sure drivers are installed)
http://forum.xda-developers.com/showthread.php?t=2513701
It looks to me like in the beginning your cache.img was corrupted, so you could get away with just flashing the cache.img from the above files, but now I would just do the entire thing.

i have this problem
colia said:
Yes, it looks exactly like that. I will try to flash a stock rom like you said in the morning. Thanks for the reply!
Click to expand...
Click to collapse
i am with this problem.... please can u tell me the steps to solve this problem or where i can found the steps to solve this...
thank for ur time

Bricked again ?

Hi all,
I just got my TF300T back from Asus after i bricked it.
New software has been installed be Asus and ofc. it was on stock Android 4.2.1
I used Motochopper Rooting Toolkit to root the device and i installed TWRP 2.6.3.0
All went fine up untill here, i copied CM 11 to the tablet and booted up in recovery.
The install of CM 11 failed for some reason so i tried formatting the whole internal storrage.
On top of that i thought it might have been the recovery so i flashed CWM 6.0.2.3 to see if that worked.
I didnt realise i just had deleted the CM 11 .zip file so its not on the tablet anymore.
When i boot up the tablet i can get into recovery (CWM) but i cant get a valid rom in the internal memory.
When i put CM11 or any other rom on a micro SD card the tab/cwm doesnt see the external card.
Also i tried the mounting options and all fail.
I have used a 64Gb card and a 16Gb card, both arnt recognized.
Is there a way to get the .zip rom to my tablet and flash it in CWM?
I think fastboot is broken as well because when i fastboot devices the tab isnt recognize.
At first i could get into fastboot screen but after the tab said cold booting linux its broken as well.
So now i cant boot into the RCK / android / wipe data icon screen anymore since i also wiped data through the wipe data icon.
Only thing that happens now the tablet boots in Asus screen and directly goes into CWM.
Any idea's ?
Cheers

Good news, i got ADB working.
What should i do?
Rgds !

Cheered to soon, seems like all the ADB commands do not work, see ataached image.
ADB devices show a device and when i unplug it it doesnt show a device.
Funny the device name is 12345789ABCDE.....
Any ideas someone ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Nobody knows an answer ?

martyzzz said:
Nobody knows an answer ?
Click to expand...
Click to collapse
Did you do NvFlash? that could restore it. Usually Wiping data from that screen ends up in a hard brick.

cmendonc2 said:
Did you do NvFlash? that could restore it. Usually Wiping data from that screen ends up in a hard brick.
Click to expand...
Click to collapse
Unfortunately i didnt do NV flash, it all happened so fast
Im giving up, to bad, the tablet had just been fixed grrr
Any1 wanna take the tablet off my hands ?
Rgds

martyzzz said:
Unfortunately i didnt do NV flash, it all happened so fast
Im giving up, to bad, the tablet had just been fixed grrr
Any1 wanna take the tablet off my hands ?
Rgds
Click to expand...
Click to collapse
It's almost frustrating to see a tablet wrecked that way. I'm not faulting you, just that all of it was totally avoidable with 10 minutes spent skimming the basics. CWM has no version that works with 4.2 bootloader, except the one embedded in the NVflash image which, of course, you ignored. Now if you get to CWM, and type "adb reboot-bootloader", what happens? If it takes you to fastboot, flash the correct version of TWRP 2.6.x.x-4.2). Failing that, search for Buster99's method. Good luck.

graphdarnell said:
It's almost frustrating to see a tablet wrecked that way. I'm not faulting you, just that all of it was totally avoidable with 10 minutes spent skimming the basics. CWM has no version that works with 4.2 bootloader, except the one embedded in the NVflash image which, of course, you ignored. Now if you get to CWM, and type "adb reboot-bootloader", what happens? If it takes you to fastboot, flash the correct version of TWRP 2.6.x.x-4.2). Failing that, search for Buster99's method. Good luck.
Click to expand...
Click to collapse
Thanks for your reply, i will give it 1 more go before i trash the TF300.
BTW i did use TWRP 2.6.X.X-4.2 i just wasnt able to flash a working rom with it, tried several but no dice...
Ill get back when i have tried.
Again thanks

martyzzz said:
Hi all,
I just got my TF300T back from Asus after i bricked it.
New software has been installed be Asus and ofc. it was on stock Android 4.2.1
I used Motochopper Rooting Toolkit to root the device and i installed TWRP 2.6.3.0
All went fine up untill here, i copied CM 11 to the tablet and booted up in recovery.
The install of CM 11 failed for some reason so i tried formatting the whole internal storrage.
On top of that i thought it might have been the recovery so i flashed CWM 6.0.2.3 to see if that worked.
I didnt realise i just had deleted the CM 11 .zip file so its not on the tablet anymore.
When i boot up the tablet i can get into recovery (CWM) but i cant get a valid rom in the internal memory.
When i put CM11 or any other rom on a micro SD card the tab/cwm doesnt see the external card.
Also i tried the mounting options and all fail.
I have used a 64Gb card and a 16Gb card, both arnt recognized.
Is there a way to get the .zip rom to my tablet and flash it in CWM?
I think fastboot is broken as well because when i fastboot devices the tab isnt recognize.
At first i could get into fastboot screen but after the tab said cold booting linux its broken as well.
So now i cant boot into the RCK / android / wipe data icon screen anymore since i also wiped data through the wipe data icon.
Only thing that happens now the tablet boots in Asus screen and directly goes into CWM.
Any idea's ?
Cheers
Click to expand...
Click to collapse
Have you tried this, saved my bricked tab. Thought I was going to have to geta new motherboard at first...
How to unbrick TF300T