Somebody has already tryed to flash a Gingerbread Stock RUU on a ICS ROM with news 3.24.401.1 firmware???
How it goes?
Thanks
ilbulgaro89 said:
Somebody has already tryed to flash a Gingerbread Stock RUU on a ICS ROM with news 3.24.401.1 firmware???
How it goes?
Thanks
Click to expand...
Click to collapse
Since updating to 3.24.401.1 firmware, I can no longer boot into MIUI 2.1.20 (a GB ROM).
new 3.24 only works for ICS, its not backwards compatible with other ROMS
3.12 firmware is though
Related
Okay, right now I am running Insertcoin 3.4.6 (Gingerbread 2.3.5) and the first ICS RUU leak. Is there any point of me to flash the latest RUU (leaked yesterday?) since I am running GB? Will it affect the performance negative or positive?
And just to throw another question in, should I flash a new RIL too when I update the firmware, or is it updated automaticly?
Thanks
Sigg1996 said:
Okay, right now I am running Insertcoin 3.4.6 (Gingerbread 2.3.5) and the first ICS RUU leak. Is there any point of me to flash the latest RUU (leaked yesterday?) since I am running GB? Will it affect the performance negative or positive?
And just to throw another question in, should I flash a new RIL too when I update the firmware, or is it updated automaticly?
Thanks
Click to expand...
Click to collapse
Hi,
The best radio is the one that works.
If it's working fine at the moment,then leave it alone.
If you intend to install ICS 4.0.3,then you WILL need the latest firmware and radio.
Can i flash rom which is optimized for 3.24 on phone with 3.30 firmware?
blue-yu said:
Can i flash rom which is optimized for 3.24 on phone with 3.30 firmware?
Click to expand...
Click to collapse
i think yes cause it is not necessary to upgrade to 3.30 to install roms based on it...so try it out in case you will get reboots
I am playing with newest arhd and insertcoin which use 3.30. But if i want to try for ex. Virtuous Inquisition v3.5.0 which is requesting 3.24, will there be some problems?
blue-yu said:
I am playing with newest arhd and insertcoin which use 3.30. But if i want to try for ex. Virtuous Inquisition v3.5.0 which is requesting 3.24, will there be some problems?
Click to expand...
Click to collapse
well i think you can use it even with the latest firmware but i am not sure because i haven't tried this yet...try it out and you will see
VI 3.5.0 is working fine on 3.30fw I've just flashed new firmware and everything is just fine!
Thanx. I will give it a try later...
Hello Guys
First i was on Android Revolution but now i have to send my phone back,
So i reinstalled the Stock Rom directly through the 4ext recovery, but there is still 4ext recovery ?
Does it belong to the stock rom or is it still a part of android revoultion hd 6.5. ?
Shall i keep it or erase it ? (I need the phone realy totally on stock)
thanks for help
hoodygfx said:
Hello Guys
First i was on Android Revolution but now i have to send my phone back,
So i reinstalled the Stock Rom directly through the 4ext recovery, but there is still 4ext recovery ?
Does it belong to the stock rom or is it still a part of android revoultion hd 6.5. ?
Shall i keep it or erase it ? (I need the phone realy totally on stock)
thanks for help
Click to expand...
Click to collapse
Hmm I think its better to keep it stock for warranty purposes
Here is the link to the guide for removing recovery
http://forum.xda-developers.com/showthread.php?t=1201773
PS: don't forget to hit thanks if this post is helpful
Sent from my HTC Sensation XE with Beats Audio using xda premium
Thank you, that is what i was looking for but now i got a new problem....
i downloaded the matching ruu , but when i want to install it , there is a error...
i think because the programm says that its already on that version...
what should i do now?
when i installed an old android revolution hd version with gingerbread, there is a bootloop... i think because of the wrong firmware package... but i dont know which fits to that gingerbread rom
hoodygfx said:
when i installed an old android revolution hd version with gingerbread, there is a bootloop... i think because of the wrong firmware package... but i dont know which fits to that gingerbread rom
Click to expand...
Click to collapse
get the matching rom from this thread
here
the matching rom would be
RUU_Pyramid_HTC_<country/carrier>_<firmware version>_Radio_<radio>_release_<xxxx>_signed
EDIT:
oops sorry you want to know which firmware supports gingerbread right?
brief description of each firmware:
3.32 Unlocked is the latest/stable release ICS 4.0.3 FW for Sensation (sense 3.6 Version) that has the Unlocked bootloader (posted by Mike1986)
3.30 Unlocked is ICS 4.0.3 FW for Sensation (sense 3.6 Version) that has the Unlocked bootloader (posted by Mike1986)
3.24 Unlocked is ICS 4.0.3 FW for Sensation (sense 3.6 Version) that has the Unlocked bootloader (posted by Mike1986)
3.12 is ICS 4.0.3 FW before that (Sense 3.5 Version)
1.17 This is the original Revolutionary 1.17.1111 Firmware with a completed Gingerbread Firmware v 1.45 package (Radio 10.14.9035.01_M)
Also the firmware thread
fclick here for firmwares
Hm i tried it but when i was on gingerbread and wanted to update with a RUU to a clean stock rom, EVERY RUU i tried was "Wrong" and wasnt working...
So i keept the stock ics rom, without superuser and s-off, but 4ext is still there....
so i think i have to keep it, it should "damage" my warranty , or am i wrong ?
Pull the recovery from the ruu and package into a PG58IMG to flash through bootloader...
Sent by Telepathy
GROGG88 said:
Pull the recovery from the ruu and package into a PG58IMG to flash through bootloader...
Sent by Telepathy
Click to expand...
Click to collapse
But how ?
How can i get the stock recovery and the other files for the pg58img ...?
aaah got it !
Thanks everyone!
Hi, can someone please tell me what firmware should I flash for installing ICS and Sense 4.0 based ROMs?? Because I am hoping to flash OrDroid ROM and is really confused about the adequate firmware for it. Can I use the mike's unlocked 3.32 firmware, which specifies that it's for Sense 3.6? or is there any specific firmware that I should flash?
I am still on the stock GB ROM..so this is the first time I am gonna flash a Custom ROM to my phone!
I would really appreciate a prompt reply!
Thanks in advance!
Prabash said:
Hi, can someone please tell me what firmware should I flash for installing ICS and Sense 4.0 based ROMs?? Because I am hoping to flash OrDroid ROM and is really confused about the adequate firmware for it. Can I use the mike's unlocked 3.32 firmware, which specifies that it's for Sense 3.6? or is there any specific firmware that I should flash?
I am still on the stock GB ROM..so this is the first time I am gonna flash a Custom ROM to my phone!
I would really appreciate a prompt reply!
Thanks in advance!
Click to expand...
Click to collapse
Yeah Mike's firmware would do.
No need to update your firmware for sense 4 roms they are ported to from HTC one s/x so current latest firmware would suffice.
sent from my blazing fast pyramid through sonic waves
I have been using 3.32 unlocked and its working perfectly
Remember to press thanks
Sent from my HTC Sensation Z710e using XDA
For a long time I was running MIUI 2.2.24 and recently installed MIUI v4 with 3.33 Firmware, and honestly I dont' care for it. The rom is fine but battery life is horrible. MIUI 2.2.24 would go 2 days on a battery; v4 goes 8-10 hrs.
I'd like to reflash 2.2.24 from a Nandroid backup but I cant seem to locate the firmware that was installed. The 2.2.24 ROM thread says you must have BELOW 3.12 to install.
The firmwares I have are; 3.12 an ABOVE, and 1.17, which is reeeellly old.
Can someone point me to the last known GB firmware?
I take that back... I think 1.17 is your only option. Btw, can you upload miui 2.2.24 somewhere? I gots to check out this epic battery life.
Sent from my HTC Sensation 4G with Beats Audio using xda app-developers app
OKors said:
For a long time I was running MIUI 2.2.24 and recently installed MIUI v4 with 3.33 Firmware, and honestly I dont' care for it. The rom is fine but battery life is horrible. MIUI 2.2.24 would go 2 days on a battery; v4 goes 8-10 hrs.
I'd like to reflash 2.2.24 from a Nandroid backup but I cant seem to locate the firmware that was installed. The 2.2.24 ROM thread says you must have BELOW 3.12 to install.
The firmwares I have are; 3.12 an ABOVE, and 1.17, which is reeeellly old.
Can someone point me to the last known GB firmware?
Click to expand...
Click to collapse
Hi,
1.17 is HERE
malybru said:
Hi,
1.17 is HERE
Click to expand...
Click to collapse
I have 1.17.
My question is; is this the latest firmware that is GB compatible? I wanna say before I flashed MIUI v4 I had something below 3.12 (other than 1.17)
OKors said:
I have 1.17.
My question is; is this the latest firmware that is GB compatible? I wanna say before I flashed MIUI v4 I had something below 3.12 (other than 1.17)
Click to expand...
Click to collapse
Hi,
1.17 will work to install GB.
OKors said:
I have 1.17.
My question is; is this the latest firmware that is GB compatible? I wanna say before I flashed MIUI v4 I had something below 3.12 (other than 1.17)
Click to expand...
Click to collapse
That's it bro... that's the highest gb compatible firmware.
chukis13 said:
That's it bro... that's the highest gb compatible firmware.
Click to expand...
Click to collapse
Got it,
flashed 1.17 then restored from backup. All is good again. 5.5 hrs @ 96% battery. That's more like it!
Are you really interested in 2.2.24? If so I can upload it to mediafire tonight when i get home.