Related
Ok, so i have had a samsung captivate since last summer. I just did the official froyo update the other day and it was successful with kies mini. I then decided to root it using super1click which also worked successfully. I have superuser, titanium backup with busybox installed, and super manager and terminal emulator. I also successfully got clockworkmod flashed and working.
My problem is that ive got the new cognition rom on my internal sd card, but when i try to flash it with cwm, i get the 3e recovery failure message. Ive been reading various sites today on how to fix this problem, but every site seems to tell me something different. I ask this question here, because it seems to be the most knowledgeable site to go to.
How do i get my rooted captivate, with all the above installed and running, to allow me to flash a new rom and possible a new kernal down the road? Im about to go insane trying to decipher through all the info all the different sites have said. Sorry to write such a novel on a tired subject, but im going crazy. Any help will be GREATLY appreciated. Thanks.
trontheman said:
Ok, so i have had a samsung captivate since last summer. I just did the official froyo update the other day and it was successful with kies mini. I then decided to root it using super1click which also worked successfully. I have superuser, titanium backup with busybox installed, and super manager and terminal emulator. I also successfully got clockworkmod flashed and working.
My problem is that ive got the new cognition rom on my internal sd card, but when i try to flash it with cwm, i get the 3e recovery failure message. Ive been reading various sites today on how to fix this problem, but every site seems to tell me something different. I ask this question here, because it seems to be the most knowledgeable site to go to.
How do i get my rooted captivate, with all the above installed and running, to allow me to flash a new rom and possible a new kernal down the road? Im about to go insane trying to decipher through all the info all the different sites have said. Sorry to write such a novel on a tired subject, but im going crazy. Any help will be GREATLY appreciated. Thanks.
Click to expand...
Click to collapse
If you would have done a search here then you would have found that you need to do one of 2 things.
1. Flash back to 2.1
2. Replace the 3e recovery with one that doesnt check for the sig.
I dont know how to replace the 3e recovery. I think ill go with flashing back to 2.1. Once i dl Odin and flash back to 2.1, then i can flash a new rom or a new kernel? Will it undo everything i've done so far? Thanks for the help.
trontheman said:
I dont know how to replace the 3e recovery. I think ill go with flashing back to 2.1. Once i dl Odin and flash back to 2.1, then i can flash a new rom or a new kernel? Will it undo everything i've done so far? Thanks for the help.
Click to expand...
Click to collapse
Here is a link to the replacement recovery.
Make sure you have the right odin and that your 3 button works right.
Yesh doing this will wipe out everything. Make sure to back up. Do not back up system data at all as when you restore it, it can lead to major issues. Once done with a custom rom it will be wiped clean. You will have to redo contacts, email, and all other settings
Thanks. Would it be okay to just flash a new kernel like speedmod kernal and just use the stock rom? Is that possible to do while im on rooted 2.2? I like the rom just fine, i just want it faster mainly. Thanks again.
trontheman said:
Thanks. Would it be okay to just flash a new kernel like speedmod kernal and just use the stock rom? Is that possible to do while im on rooted 2.2? I like the rom just fine, i just want it faster mainly. Thanks again.
Click to expand...
Click to collapse
To be honest I am not sure. I only had the stock on for a few hours as it was just not that great compared to the 2.2.1 rom that I have been used to running. I need BT voice dial and the added exchange options so 2.2 was not really for me. If you want a stock feel but faster then I would go with COG or one of the other roms based on the kb1 rom.
So I've come to the conclusion that I should just flash back to 2.1 and go from there. I have odin downloaded, but I'm not certain how to use it. Do you guys think I should flash a custom rom from stock, or just flash a kernel with lag fix and delete the bloatware? Thanks.
first flash 2.1 stock to get rid of the damn 3e. custom roms dont replace that always. also most custom roms dont flash with odin.
get a stock rom. read the instructions, flash
trontheman said:
So I've come to the conclusion that I should just flash back to 2.1 and go from there. I have odin downloaded, but I'm not certain how to use it. Do you guys think I should flash a custom rom from stock, or just flash a kernel with lag fix and delete the bloatware? Thanks.
Click to expand...
Click to collapse
If you are getting .zip signature errors when trying to flash a rom (because you are using 3e recovery) you will not be able to flash a kernel.
Supercurio did make a KB1 kernel that is installable via Odin. If you install that, you will also get CWM recovery. Then you can flash anything you want.
Either way you will need an Odin program. Either Odin One Click to flash back to stock 2.1 or Odin v1.7 to flash the Supercurio KB1 Kernel .tar file.
trontheman said:
Thanks. Would it be okay to just flash a new kernel like speedmod kernal and just use the stock rom? Is that possible to do while im on rooted 2.2? I like the rom just fine, i just want it faster mainly. Thanks again.
Click to expand...
Click to collapse
Correct me if i'm wrong but I think the speedmod kernal is i9000 based which would cause a major headache/bootloop on the stock rom.
Sent from my SAMSUNG-SGH-I897 using XDA App
Johnnie5000 said:
Correct me if i'm wrong but I think the speedmod kernal is i9000 based which would cause a major headache/bootloop on the stock rom.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
....it works fine on stock 2.2, as does any other 2.2/2.2.1 kernel
Pirateghost said:
....it works fine on stock 2.2, as does any other 2.2/2.2.1 kernel
Click to expand...
Click to collapse
The problem is, the OP has no idea what he's doing. It sounds like he's wanting to flash to 2.1, then add a I9000 kernel. Since he's all over the place, it's hard to decipher what he's thinking.
To the OP. I'd HIGHLY suggest you look for the stickied "how to" video's by Connexxion. They will tell you what you need to do and show you EXACTLY how to do it. Invaluable info for the noobs.
Here is the link your looking for, download the installer zip file at the bottom of the first post. Extract to your fancy, use the install.bat file once extracted. Be sure to have the phone connect to the pc (DO NOT MOUNT) and have USB Debugging on.
Modded 3e recovery that works like 2e
trontheman said:
Ok, so i have had a samsung captivate since last summer. I just did the official froyo update the other day and it was successful with kies mini. I then decided to root it using super1click which also worked successfully. I have superuser, titanium backup with busybox installed, and super manager and terminal emulator. I also successfully got clockworkmod flashed and working.
My problem is that ive got the new cognition rom on my internal sd card, but when i try to flash it with cwm, i get the 3e recovery failure message. Ive been reading various sites today on how to fix this problem, but every site seems to tell me something different. I ask this question here, because it seems to be the most knowledgeable site to go to.
How do i get my rooted captivate, with all the above installed and running, to allow me to flash a new rom and possible a new kernal down the road? Im about to go insane trying to decipher through all the info all the different sites have said. Sorry to write such a novel on a tired subject, but im going crazy. Any help will be GREATLY appreciated. Thanks.
Click to expand...
Click to collapse
I am wanting to flash back to 2.1 and go from there. I have the drivers installed and I have odin downloaded. I tried it last night, but I couldn't get it to work. I got it to download mode, but still nothing. What could the problem be? Thanks.
I tried odin one click again today, but still nothing. All i want to do is flash back to 2.1, root, then flash a rom or custom kernel. Im losing my mind, any more help is greatly appreciated. Thanks.
Bump. Thanks.
trontheman said:
I tried odin one click again today, but still nothing. All i want to do is flash back to 2.1, root, then flash a rom or custom kernel. Im losing my mind, any more help is greatly appreciated. Thanks.
Click to expand...
Click to collapse
ok no need to flash 2.1
get neldars kernel flashing app from the market
get a kernel for froyo without 3e recovery in the dev section. this one is great
http://forum.xda-developers.com/attachment.php?attachmentid=547852&d=1300708475
use neldars app (edit) "sgs kernel flasher" or something to that effect. to flash this kernel
then flash cognition
you can also use odin3 but not the oneclick downloader without the .pit file and flash the same kernel placed in the pda slot.
when you installed keis mini, it installed new WRONG drivers (for odin)
reinstall the original other drivers.
BUT. in your OP all you wanted was to be able to flash COG or something.
ALL you have to do is fix your 3e recovery, SEVERAL people including myself have told you how to fix it. then CWM will work! you dont need a computer to fix 3e if you have root explorer (google it $) .
if you are going to flash a custom rom anyway dont bother going back to 2.1.
if you are going to stay stock, 2.2 is better anyway. (aside from 3e but staying stock dont matter)
you can also use odin3 but not the oneclick downloader without the .pit file and the same kernel placed in the pda slot.
Click to expand...
Click to collapse
@ dani - dude read the thread. odin doesn't recognize his phone.!! try to catch up before butting in...
well that doesn't make my whole post irrelivent. if he is rooted and has busy box he can use neldars kernel flasher. sorry if i over looked something.
Ok, well i got the aio toolbox, and i flashed back to stock. Now im running 2.1-update1. How do i go about rooting now? I cant seem to find a root file. Thanks.
Can someone please post a link on how one goes about rooting their phone now that superoneclick does not work after GB update? I didn't root before the update, and just tried to go through the process but to no avail. I really want to start flashing roms and unlock the power of the phone now that I have seen GB.
correct me if im wrong but i think you need to flash a rom that has root already.
as of right now you cannot root GB.
Run nvflash from the Dev section. Follow the instructions closely. There is a video available. Then flash xboarders rom. Then you will have a rooted updated rom.
Beggars1923 said:
Can someone please post a link on how one goes about rooting their phone now that superoneclick does not work after GB update? I didn't root before the update, and just tried to go through the process but to no avail. I really want to start flashing roms and unlock the power of the phone now that I have seen GB.
Click to expand...
Click to collapse
First, download the rooted GB 2.3.3 ROM and copy it onto your SD card
http://forum.xda-developers.com/showthread.php?t=1179748
You won't be able to root with Superoneclick or any other rooting app. The easiest and fastest way to go about this is to flash CWM via NV flash.
http://forum.xda-developers.com/showthread.php?t=1056847
After flashing CWM reboot in recovery mode and flash the rooted ROM and voila!
You have the newest baseband and a rooted GB phone.
P.S. To be honest, I think the only reason that makes it worth going through all this trouble is being able to flash the new baseband on your phone.
Good Luck!
rvdangel630 said:
correct me if im wrong but i think you need to flash a rom that has root already.
as of right now you cannot root GB.
Click to expand...
Click to collapse
That is the easiest way to get root access.
Thank you all! So I'll be able to flash CM7 after this?
Also, I would assume devs are working on a way to use superoneclick, am I wrong?
NrikeCalderon said:
First, download the rooted GB 2.3.3 ROM and copy it onto your SD card
http://forum.xda-developers.com/showthread.php?t=1179748
You won't be able to root with Superoneclick or any other rooting app. The easiest and fastest way to go about this is to flash CWM via NV flash.
http://forum.xda-developers.com/showthread.php?t=1056847
After flashing CWM reboot in recovery mode and flash the rooted ROM and voila!
You have the newest baseband and a rooted GB phone.
P.S. To be honest, I think the only reason that makes it worth going through all this trouble is being able to flash the new baseband on your phone.
Good Luck!
Click to expand...
Click to collapse
I keep seeing this same reply and wondering... Can't someone make the necessary root files a flashable zip and then we don't have to flash a whole ROM to attain root?
Actually, so far they can't. The way you get root on your phones is by finding a security exploit so you can write a few files, and busybox simlinks to the system. Then, it installs superuser. No roms are rooted on android by default (well, stock ones anyways.) Since all the current methods to root a gingerbread rom don't work on the new update, this is the only way to do it for now.
OK i just got this phone today and i did the root via superclick and check it with root cheker and rom manager and terminal emulator, all of them said my phone is root, but i cant get into the CWM MODE to flash a Rom. when im in the normal android recovery and click on reinstall packages i get an error. What can i do???
daworship said:
OK i just got this phone today and i did the root via superclick and check it with root cheker and rom manager and terminal emulator, all of them said my phone is root, but i cant get into the CWM MODE to flash a Rom. when im in the normal android recovery and click on reinstall packages i get an error. What can i do???
Click to expand...
Click to collapse
I'm superoneclick stupid; I've never used it. Does it install CWM? If not, you'll need to install CWM. One of the ways is through Krylon360's post here:
http://forum.xda-developers.com/showthread.php?t=1099374
Or installing a ROM/kernel that has CWM.
ROM Manager does not work for the SGS4G. In order to get a working CWM Recovery Menu you will need to ODIN a custom kernel with CWM already installed. If you want to stay on froyo you will need drhonk's Bali v3.3 kernel, and if you want to update to gingerbread you can follow FB's GB Starter Pack guide. All of these can be found in the android development section.
I also suggest you read this (among other things) before proceeding:
http://forum.xda-developers.com/showthread.php?t=1310270
Also get prepared to be flamed. Sorry.
Thanks but can i flash a costum kernel on the stock rom? i had other devices before this one, and i never got this kind of problems, thats why im asking.
Flash one of honks kernels via Odin.
Sent from my SGH-T959V using xda premium
Sorry buddy it's not like the LG optimus for example.. you have to use Odin. Only way to go! Read the Bible in the stickies and Odin stock. http://forum.xda-developers.com/show....php?t=1117554 That's gonna be a link to the bible
I think i just got it, thanks guys!
Is it so hard to read?
Soft bricked(total noob) just got the JIG, got into download menu.
Can someone give me instructions on how to get back to stock, gain root, and install custom ROMS/ MIUI
It be very appreciated, i'm doing this for a buddy and i don't want to give him a brick lol.
1. for restoring stock : http://forum.xda-developers.com/showthread.php?t=731989
2. use superoneclick to root
3. Install clockwork recovery and rom manager
4. Install custom roms.
Wait before you flash that, what firmware version did it come with???
It could mess your phone up if it isn't right.
Sent from my SGH-I897 using xda premium
b-eock said:
Wait before you flash that, what firmware version did it come with???
It could mess your phone up if it isn't right.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Pretty sure it came with 2.2 but not sure.
Then I wouldn't do that 2.1 Odin one click.... Look for a stock 2.2 Odin or Heimdall, make sure to read thoroughly too.
b-eock said:
Then I wouldn't do that 2.1 Odin one click.... Look for a stock 2.2 Odin or Heimdall, make sure to read thoroughly too.
Click to expand...
Click to collapse
See thats the thing i hate to be a pain but im looking for detailed instructions.
b-eock said:
Wait before you flash that, what firmware version did it come with???
It could mess your phone up if it isn't right.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
thank you for pointing it out
OP might want to look at these threads:
http://forum.xda-developers.com/showthread.php?p=15330252
http://forum.xda-developers.com/showthread.php?t=963403
Note: as b-eock pointed out, make sure what was your stock version before restoring it!
I've always just flashed newer than my stock to avoid that problem and it always works well for me, after bricking or when i want to flash a new rom i flash to cappy gingerbread and flash boog kernal to get CWM(clockworkmod). CWM is essential is you plan on flashing to other roms. If you plan on flashing to another rom anyways it doesn't matter which version of stock you load as long as it work so I'd just flash 2.2 or newer.
http://forum.xda-developers.com/showthread.php?t=1300843
- this has all the odin 1-click flashable packages for captivate
To do everything you want to do...
flash back to stock, use 2.2 or one of the 2.3 versions. If you plan on flashing to a gingerbread rom (2.3) you'll most likely need the gingerbread bootloaders, if you don't originally flash a odin package with the gingerbread bootloaders you might be asked to install them later depending on what rom you use
incase you don't know odin is the computer program used to flash one click packages, you can find it by searching XDA, one click packages won't require it.
odin has to be open before you plug the usb into the phone putting it into download mode.
to flash to other roms you need CWM (ClockWorkMod-a customized recovery mode for the phone) the thread in this post has links to odin flashable kernals with CWM for each software build. To get CWM flash the respective kernal for the version you use. You'll need odin to flash the new kernal, its essentially stock apart from CWM. In odin select PDA and browse to the kernal zip to flash it.
you can search around XDA for oneclickroots, they will typically be odin or CWM flashable it's quite straight forward. New roms will typically already be rooted so you shouldn't have to root again.
good luck!
Does anyone know which exact ODIN i need to flash to get back to 2.2 from download mode.
You can use adamoutler's uckb2 heimdall one click. That's stock 2.2.
But whitch ODIN do i use.
Gez, HTC is so much easier then this samsung!
David522d said:
But whitch ODIN do i use.
Gez, HTC is so much easier then this samsung!
Click to expand...
Click to collapse
Unfortunately, there is currently no Odin one-click of stock Froyo (at least that I'm aware of). If you want stock Froyo, you'll need to either piece it together with full Odin, or use the Heimdall One-Click.
jmtheiss said:
Unfortunately, there is currently no Odin one-click of stock Froyo (at least that I'm aware of). If you want stock Froyo, you'll need to either piece it together with full Odin, or use the Heimdall One-Click.
Click to expand...
Click to collapse
*Update*
I flashed the 2.2 from this http://www.mobiletechvideos.com/blog/?page_id=186
Now i need to root and install recovery please SOMEONE HELP ME!!!! im so ****ty with this crap. Soon as i get recovery ill be straight.
David522d said:
*Update*
I flashed the 2.2 from this http://www.mobiletechvideos.com/blog/?page_id=186
Now i need to root and install recovery please SOMEONE HELP ME!!!! im so ****ty with this crap. Soon as i get recovery ill be straight.
Click to expand...
Click to collapse
Take a look in this post. That should get you the right 3E recovery.
Once you have that, you can either use ROM Manager to install CWM recovery, or see if you can find a kernel with it already baked in and use ODIN to flash the kernel (look for the speedmod kernel).
Or you could flash stock GB, but that updates bootloaders and is a whole different can of worms.
jmtheiss said:
Take a look in this post. That should get you the right 3E recovery.
Once you have that, you can either use ROM Manager to install CWM recovery, or see if you can find a kernel with it already baked in and use ODIN to flash the kernel (look for the speedmod kernel).
Or you could flash stock GB, but that updates bootloaders and is a whole different can of worms.
Click to expand...
Click to collapse
wouldnt it be better to root first? My focus is just getting MIUI on this thing
Another update.
I rooted the 2.2 im on and now enabled non market apps to be downloaded.
Can someone now tell me how to install recovery and install custom ROMS!
i know i know im annoying, im sorry!
David522d said:
wouldnt it be better to root first? My focus is just getting MIUI on this thing
Click to expand...
Click to collapse
Normally, the answer would be yes. However, as part of the Froyo update, AT&T managed to mess up the recovery menu, meaning that it won't flash unsigned packages. This makes getting CWM basically impossible without doing the steps in that post or flashing a different kernel.
You can root if you want to, but doing the steps in that post first will save you some headache.
jmtheiss said:
Normally, the answer would be yes. However, as part of the Froyo update, AT&T managed to mess up the recovery menu, meaning that it won't flash unsigned packages. This makes getting CWM basically impossible without doing the steps in that post or flashing a different kernel.
You can root if you want to, but doing the steps in that post first will save you some headache.
Click to expand...
Click to collapse
I already rooted =/ , should i still try this?
If you have full ODIN, go here, and download the kernel labeled "speedmod-kernel-i897-k13c-500hz.tar" at the end of the first post. Open Odin, and in the "PDA" slot, navigate to the .tar file and flash it. That will get you the speedmod kernel, which has CWM, which you need to be able to flash.
Once it's flashed, just hold V+/V-/Power until it reboots, and then you'll be in CWM and can flash MIUI.
I'm assuming you've backed up all your apps with Titanium Backup, right? If you haven't, do that before you do anything else so you don't lose them.
jmtheiss said:
If you have full ODIN, go here, and download the kernel labeled "speedmod-kernel-i897-k13c-500hz.tar" at the end of the first post. Open Odin, and in the "PDA" slot, navigate to the .tar file and flash it. That will get you the speedmod kernel, which has CWM, which you need to be able to flash.
Once it's flashed, just hold V+/V-/Power until it reboots, and then you'll be in CWM and can flash MIUI.
I'm assuming you've backed up all your apps with Titanium Backup, right? If you haven't, do that before you do anything else so you don't lose them.
Click to expand...
Click to collapse
Im not sure if i have "FULL" ODIN. I have the ODIN i just used to install 2.2. Then i rooted it using SUPER1CLICK.
Where do i get the full odin
I already have Gingerbread 2.3.6/ UCLB3 on my Infuse. How do I root and install CWM on the Infuse. All the guides seems to be upgrading to 2.3.6
pandroid4 said:
I already have Gingerbread 2.3.6/ UCLB3 on my Infuse. How do I root and install CWM on the Infuse. All the guides seems to be upgrading to 2.3.6
Click to expand...
Click to collapse
i thought in order to install gingerbread you have to be already rooted ???
i am not sure, but you can try download cwm from google play and choose the first option
g-noob said:
i thought in order to install gingerbread you have to be already rooted ???
i am not sure, but you can try download cwm from google play and choose the first option
Click to expand...
Click to collapse
Not necessarily, you could get 2.3.6 with Kies mini when ATT released it.
Look in this thread for guides to root. Read, read and read some more and make sure you have Heimdall or Odin on your PC. Follow guide to install correct drivers too.
http://forum.xda-developers.com/showthread.php?p=25111013
Sent from my SGH-I997 using xda premium
pandroid4 said:
I already have Gingerbread 2.3.6/ UCLB3 on my Infuse. How do I root and install CWM on the Infuse. All the guides seems to be upgrading to 2.3.6
Click to expand...
Click to collapse
read this thread:
http://forum.xda-developers.com/showthread.php?t=1524081
or this thread:
http://forum.xda-developers.com/showthread.php?t=1613523
Still Confusing. My infuse already has Gingerbread with UCLB3 installed( I bought this way). I just want to root and CWM installed. Any guides out there how to do it.
rooting and CWM on stock 2.3.6
Still confusing. This phone has stock version of Gingerbread 2.3.6 with UCLB3 firmware. I bought this way. I just want to root and Install CWM. ANy guides out there? This is not froyo and all the help out there shows how to go back to GB or upgrade to 2.3.6/ uclb3 ... like that. I already have UCLB3 firmware and why I need to install it again?
Probably because the links we provided had a rooted version of 2.3.6.
Sent from my SGH-I997 using xda premium
pandroid4 said:
Still confusing. This phone has stock version of Gingerbread 2.3.6 with UCLB3 firmware. I bought this way. I just want to root and Install CWM. ANy guides out there? This is not froyo and all the help out there shows how to go back to GB or upgrade to 2.3.6/ uclb3 ... like that. I already have UCLB3 firmware and why I need to install it again?
Click to expand...
Click to collapse
See post #2 or #3 in the first link qkster provided - these are Heimdall packages that will load a custom kernel/recovery with CWM. These will not reinstall the entire rom. Follow the instructions in post #1 if you are unfamiliar with Heimdall.
Or, if you are more comfortable using Odin see this thread and flash any of the three options in the OP that say "red CWM":
http://forum.xda-developers.com/showthread.php?t=1698367
**Before you flash the new kernel/recovery, visit the page shown below, download the first package under ARM devices, then copy the zip to your internal SD Card (if you are uncertain copy it to both).**
Home page for SuperUser - http://androidsu.com/superuser/
Direct link to SuperUser installer - http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.1.3-arm-signed.zip
Once you have installed the custom kernel/recovery, let the phone sit for about 5-10 minutes - you will hear a voice coming from the phone - this is red CWM non-destructively reformatting your system, data, and dbdata filesystems from stock RFS to ext4 upon first reboot. It is important to let this process complete without interruptions. Once the phone boots, shut the phone down and boot into recovery then flash the SuperUser package... when completed reboot into phone OS and you are rooted.