Related
My fellow Canadians...
I have noticed a number of issues with the latest official firmware for the Rogers captivate. I think it would be a good idea to put them all in one place and try to start figuring out what common issues exist and perhaps we can address them all at once. Please state the issue, when it seems to happen, and what if any modifications you have made to your software setup. Maybe someone will notice a pattern or trend and we can get them resolved.
Thanks!
Reserved +10 char
One major issue I have noticed is when updating apps through the 3.1.5 market. It seems to only happen when I am updating an app, not when I am installing a new app:
Sorry!
The application TwLauncher(process com.sec.android.app.twlauncher) has stopped unexpectedly. Please try again.
At which point I have to force close it.
Also, I have experienced random shut downs, I will click the power/screen lock button to unlock the phone, and it seems the phone has shut itself off. If you hold down the power button it boots normally.
Anyone else experiencing these issues?
clemmie said:
One major issue I have noticed is when updating apps through the 3.1.5 market. It seems to only happen when I am updating an app, not when I am installing a new app:
Sorry!
The application TwLauncher(process com.sec.android.app.twlauncher) has stopped unexpectedly. Please try again.
At which point I have to force close it.
Also, I have experienced random shut downs, I will click the power/screen lock button to unlock the phone, and it seems the phone has shut itself off. If you hold down the power button it boots normally.
Anyone else experiencing these issues?
Click to expand...
Click to collapse
Did you try a factory reset after you updated?
Voice for Swype
The voice command for Swype doesn't work.......
1. Speed dial no longer works. Says 'USSD code running' then closes and gives message 'unknown application'
2. GPS has stopped working completely.
As far as the launcher crashes, I don't use touchwiz. I do use Launcher Pro. It does seem to crash every so often. I've replaced all my widgets because I've read somewhere that this might help.
No random shutdowns here.
I talked to a samsung technical support rep and his captivate's swype voice input didn't work either.
iam_immigrant said:
1. Speed dial no longer works. Says 'USSD code running' then closes and gives message 'unknown application'
2. GPS has stopped working completely.
Click to expand...
Click to collapse
GPS works perfectly on mine captivate 2.3.3 and I get better reception and locking time. But GPS will stop working if you flashed a custom Kernel on it! I know that because I tried it and GPS wasn't working when I had a custom Kernel, had to flash back the stock kernel.
Edit: I just tried Speed dial and it's working perfectly, I think there is something wrong on your phone.
Nick0703 said:
GPS works perfectly on mine captivate 2.3.3 and I get better reception and locking time. But GPS will stop working if you flashed a custom Kernel on it! I know that because I tried it and GPS wasn't working when I had a custom Kernel, had to flash back the stock kernel.
Edit: I just tried Speed dial and it's working perfectly, I think there is something wrong on your phone.
Click to expand...
Click to collapse
I also don't have any issues with the GPS or Speed Dial. My only mod was rooting with the FUGU kernel.
erbsmokah said:
Did you try a factory reset after you updated?
Click to expand...
Click to collapse
I hadn't thought of that; I wonder if I'll lose my root? Come to think of it, I wonder if that's causing the launcher crashes...
Nick0703 said:
GPS works perfectly on mine captivate 2.3.3 and I get better reception and locking time. But GPS will stop working if you flashed a custom Kernel on it! I know that because I tried it and GPS wasn't working when I had a custom Kernel, had to flash back the stock kernel.
Edit: I just tried Speed dial and it's working perfectly, I think there is something wrong on your phone.
Click to expand...
Click to collapse
Got the phone from Rogers with 2.1 then upgraded to 2.2 then to 2.3.3 (all done through Kies. GPS was ok but spotty on 2.1 and much better with Froyo but hoped Gingerbread would bring more improvement.
I've tested it since Rogers released 2.3.3 and on a few occasions I've even gone to the roof of my building on a clear day and waited for 45mins!! and nothing! Not lock then lose it but NOTHING! Speed dial I can live without but I actually use the GPS quite a bit.
Since upgrading I've done a factory reset 4 times and even sent it in for repair, which came back saying "upgraded SW and factory reset" which fixed nothing.
I've just rooted (just root nothing else) and I've tried to do use the gps code but I can't even get into that!!
What can I do at this point?
iam_immigrant said:
Got the phone from Rogers with 2.1 then upgraded to 2.2 then to 2.3.3 (all done through Kies. GPS was ok but spotty on 2.1 and much better with Froyo but hoped Gingerbread would bring more improvement.
I've tested it since Rogers released 2.3.3 and on a few occasions I've even gone to the roof of my building on a clear day and waited for 45mins!! and nothing! Not lock then lose it but NOTHING! Speed dial I can live without but I actually use the GPS quite a bit.
Since upgrading I've done a factory reset 4 times and even sent it in for repair, which came back saying "upgraded SW and factory reset" which fixed nothing.
I've just rooted (just root nothing else) and I've tried to do use the gps code but I can't even get into that!!
What can I do at this point?
Click to expand...
Click to collapse
Yeah, with the 2.3.3 you can't access the gps setting by entering the code, because everything you enter the code *#*#3214789650#*#*, you'll get a message saying "Service mode has crashes blablaba...". The only that I found to bypass that was to go to market and install the app "Anycut" then launch it, select New Shortcut, Activity then choose Angry gps.
I'll look up what's the problem that causing you not to get a good gps signal.
Sent from my SGH-I896 using XDA App
Nick0703 said:
Yeah, with the 2.3.3 you can't access the gps setting by entering the code, because everything you enter the code *#*#3214789650#*#*, you'll get a message saying "Service mode has crashes blablaba...". The only that I found to bypass that was to go to market and install the app "Anycut" then launch it, select New Shortcut, Activity then choose Angry gps.
I'll look up what's the problem that causing you not to get a good gps signal.
Sent from my SGH-I896 using XDA App
Click to expand...
Click to collapse
Man I was going nuts trying that gps code. Googled and searched this forum and everything pointed to that code. Was ready to toss my phone off the roof!
Was reading these forums for the past couple weeks learning how to root/flash (just rooted today actually) to get gps working.
I'm guessing I might have to try flashing it again with the stock rom from this thread http://forum.xda-developers.com/showthread.php?t=979133 but gotta do some more reading before attempting it.
iam_immigrant said:
Man I was going nuts trying that gps code. Googled and searched this forum and everything pointed to that code. Was ready to toss my phone off the roof!
Was reading these forums for the past couple weeks learning how to root/flash (just rooted today actually) to get gps working.
I'm guessing I might have to try flashing it again with the stock rom from this thread http://forum.xda-developers.com/showthread.php?t=979133 but gotta do some more reading before attempting it.
Click to expand...
Click to collapse
I use an app called GPS Status from the market. There, in the menu under 'tools', you can 'manage A-GPS state and wipe the location info the GPS has back to scratch. Then download the assistance data from the internet. This worked well for me and I do it from time to time to keep things current.
Sent from my SGH-I896 using XDA App
clemmie said:
One major issue I have noticed is when updating apps through the 3.1.5 market. It seems to only happen when I am updating an app, not when I am installing a new app:
Sorry!
The application TwLauncher(process com.sec.android.app.twlauncher) has stopped unexpectedly. Please try again.
At which point I have to force close it.
Also, I have experienced random shut downs, I will click the power/screen lock button to unlock the phone, and it seems the phone has shut itself off. If you hold down the power button it boots normally.
Anyone else experiencing these issues?
Click to expand...
Click to collapse
How long have you had the phone? The random shut downs is not a ROM issue. I am pretty sure it is a hardware problem. It was acknowledged by Samsung. There is even a list of effected builds. I am sure you could find the build numbers with a little search. I had this problem when I first got the phone last December but had Rogers replace it. If it is the same problem, I think you will notice that the sleep of death only occurs when the battery is like above 85% or somthing like that. It has been a while so I can't exactly remember.
I can't seem to get the firmware actually downloaded. I'm going through kies and it recognizes my phone, and recognizes that I need to upgrade, starts downloading the upgrade and at 12% it disconnects. I have two screen shots here that show what I am talking about.
Any ideas?
clemmie said:
I use an app called GPS Status from the market. There, in the menu under 'tools', you can 'manage A-GPS state and wipe the location info the GPS has back to scratch. Then download the assistance data from the internet. This worked well for me and I do it from time to time to keep things current.
Sent from my SGH-I896 using XDA App
Click to expand...
Click to collapse
Tried this the entire day and still nothing. I know it's kinda cloudy out today but still nothing.
i found 2.3.3 very slow, and poorly built. no voice button in swype PEEVED me off.i was originally making my custom canadian rom off Kh2 (rogers 2.3.3) but i dropped that project and released a canadianized/rogersized KJ3 (2.3.5).
one of the best roms in the dev section. and will be updated by the end of the week with the theming all included. the pic in my sig is a link to the rom if you havent seen EFFIN EH!
Unable to update my Captivate
My captivate is still 2.2 and while connecting to Kies it says this version of the device cannot be updated.
Current version shows PDA: JL1/phone: JL1/CSC: JL1 (xxx).
I had rooted via Super one click and I can see Superuser installed. I havent used it for any purpose.
I removed my external SD card and did factory reset. No luck.
nambisan said:
My captivate is still 2.2 and while connecting to Kies it says this version of the device cannot be updated.
Current version shows PDA: JL1/phone: JL1/CSC: JL1 (xxx).
I had rooted via Super one click and I can see Superuser installed. I havent used it for any purpose.
I removed my external SD card and did factory reset. No luck.
Click to expand...
Click to collapse
flash to stock 2.3.3 using the link in my signature. YOU NEED BOOTLOADERS coming from 2.2
Ok noob alert..just a prelude I've done alot of searching and reading, and *think I have some answers, but if some kind soul were to take a quick look and maybe verify what I've found, I'd be eternally grateful. I used to have a LG Optimus and easily rooted/upgraded to CM7 by reading this forum and didn't have to ask any questions.
Now I've gone and signed up for WIND (Canada) and picked up an XT720. It's my budget and I'm not overly concerned about whether or not I have ICS immediately. I'd rather have something stable and $$ saving.
OK so I'm noticing a serious difference in the way the XT720 handles the WIFI/mobile data situation compared to the LG: it doesn't. First off, there's no easy way to turn off mobile data. Secondly, enabling WIFI gets me a connection to my router, yes, but browsers and apps that require a connection just refuse to use the WIFI unless: 1. there is 3G data connection - in other words, it ain't using WIFI 2. I put the phone in Airplane Mode, and turn WIFI back on. Great, but now no phone calls or SMS. Not a viable workaround. Option 3 involves hard resetting the phone with a battery pull which sometimes works and sometimes doesn't.
From scouring around various sites, this seems to have been a common problem with 2.1 and this model of phone. And thus the workarounds I tried were also employed by others.
From what I know of all versions custom ROMs etc from 2.2 onward for other models of phones, though, this wasn't an issue, and also in 2.2 and onward you can switch off Mobile Data which will force the WIFI connection if turned on.
So is this something that I will see an improvement on if I install say CM 6.3 onward or whatever? I'll get the ability to turn off mobile data, right? And then there theoretically shouldn't be a conflict, right?
That's my biggest issue. I don't get enough 3G signal in my house to just use the mobile data connection, I absolutely have to be able to use WIFI and receive phone calls/texts at the same time, so if custom roms aren't going to help me, I'd best return the phone.
Some other things I'm curious about:
- do most of the normal functions of the phone work with CM 6.3? HD recording, camera, HDMI out etc? Anything I've missed?
- I see quite a bit of talk about people running out of RAM and using sd swapping etc is this a common problem? Even with about 20 or so apps and CM7 on my LG Optimus I was still able to maintain about 110 mb RAM free at all times by judicious use of installing apps on SD card...will I be ok?
- Probably the biggest question before I root/install...most of the guides I'm reading talk about installing various stock sbfs etc etc...I'm coming in from a WIND stock rom so I don't *THINK* I need to do this, right? I should be nandroid'ing, Open Recovery, flash custom rom....right?
Here's my specs
Xt720 Wind Canada
s/w STR_U2_05.1F.2
f/w 2.1-update1
f/w config GAS_NA_NAWIND_P012
Baseband 3GSMEPU91A_U_91.075EI
kernel 2.6.29-omap1
I realize that some of this is covered in other threads. To be honest tho some respondents/contributors aren't English first language and I just want to make sure I haven't misunderstood anything. Anyone who has done similar to what I'm trying to do, especially coming from a WIND perspective, lemme know your thoughts, please and thanks alot!
acrobat69 said:
Now I've gone and signed up for WIND (Canada) and picked up an XT720. It's my budget and I'm not overly concerned about whether or not I have ICS immediately. I'd rather have something stable and $$ saving.
Click to expand...
Click to collapse
I've picked up the XT720 myself from Wind a few days ago at the clearance price ($150 outright, no plan). They even told me there are no guarantees with the phone with its stock ROM and seemed glad to hear that I was gonna use it with a custom ROM. I knew what I was getting into and the only reason I still bought the phone is this:
http://forum.xda-developers.com/showthread.php?t=1300246
We are extremely lucky to get Gingearbread on our phones, so don't even think of ICS at this moment. As you noticed already the stock 2.1 is useless and I flashed mine the 1st day.
acrobat69 said:
That's my biggest issue. I don't get enough 3G signal in my house to just use the mobile data connection, I absolutely have to be able to use WIFI and receive phone calls/texts at the same time, so if custom roms aren't going to help me, I'd best return the phone.
Click to expand...
Click to collapse
The ROM I linked above (the only 2.3, actually CM 7.1 available for XT720) works as you'd expect with wifi and 3g, that is it uses wifi when connected to both. Any decent ROM will do that.
acrobat69 said:
- do most of the normal functions of the phone work with CM 6.3? HD recording, camera, HDMI out etc? Anything I've missed?
Click to expand...
Click to collapse
HD recording - not yet (you don't lose much anyway, the camcorder quality would be crappy, check reviews with the stock OS)
camera - yes (pretty good quality)
HDMI - not yet (I'm guessing it will be fixed very soon, the devs are working on exactly this)
everything else - yes
acrobat69 said:
- I see quite a bit of talk about people running out of RAM and using sd swapping etc is this a common problem? Even with about 20 or so apps and CM7 on my LG Optimus I was still able to maintain about 110 mb RAM free at all times by judicious use of installing apps on SD card...will I be ok?
Click to expand...
Click to collapse
This one is tricky, the phone only has about 225mb usable RAM, there's not much multi-tasking you can do with that amount but it's workable. There are some performance tweaks you can do (overclocking, CM settings, V6 SuperCharger, etc.) to make it decent. Moving apps on sd card is a good idea in order to save storage space on the phone (another limited resource at only 174mb) but has nothing to do with RAM.
acrobat69 said:
- Probably the biggest question before I root/install...most of the guides I'm reading talk about installing various stock sbfs etc etc...I'm coming in from a WIND stock rom so I don't *THINK* I need to do this, right? I should be nandroid'ing, Open Recovery, flash custom rom....right?
Click to expand...
Click to collapse
I've been wondering the same thing, what's up with all the SBFs people are talking about left and right? The answer is don't worry about them, you don't need any SBF. They are just that, stock ROMs, all 2.1. You would only need one (the Wind version) if you wanted to take the phone back for servicing and wanted to return to the original non-rooted state. Apparently even if you take a full nandroid backup with your stock ROM now and restore it later, the phone will still be rooted and this is where a stock SBF would help. I'm not gonna bother, even if I do take it back (highly doubt it, with the custom ROM it's a very good phone for $150 outright), I'm just gonna restore my stock nandroid backup.
So what you need is:
1. root the phone (personally I used SuperOneClick, google for the latest version)
2. install OpenRecovery: http://modmymobile.com/forums/563-m.../531599-open-recovery-v1-46-11-21-2010-a.html
I can send you the file you need if you pm your email address. I HATE it when I have to register on some forum just to get 1 stupid file. And you absolutely CANNOT get that stupid file anywhere else on the face of the Earth/internet.
3. install this mod for OpenRecovery: http://forum.xda-developers.com/showthread.php?t=1242259
4. go to the ROM's thread, dl the latest build linked in the 1st post, copy the zip file to your sdcard\openrecovery\updates, reboot into recovery mode, apply update, format data&cache, reboot. Done. Enjoy!
BuddyBud said:
2. install OpenRecovery: http://modmymobile.com/forums/563-m.../531599-open-recovery-v1-46-11-21-2010-a.html
I can send you the file you need if you pm your email address. I HATE it when I have to register on some forum just to get 1 stupid file. And you absolutely CANNOT get that stupid file anywhere else on the face of the Earth/internet.
Click to expand...
Click to collapse
There's an OpenRecovery apk floating around here to install ther OR bootstrap, no need to register at ModMyMobile.
:Edit:
Woodrube has it attached to this thread. Install the apk from the sdcard, reboot, then run the apk & install OR. (Now you can switch out the OR files with Mioze's modded OR)
here you go
I knew that thread would come in handy one of these days. Plus Buddy and Acro there are other handy APKs in there too.
Mioze actually have all the necessary Open Recovery files linked in his CM6.3 topic
that's the most updated version
THANK YOU THANK YOU THANK YOU to James and everyone who has responded so far - even going so far as to direct link me to files I'll need? You guys are the best!!.
I really appreciate the encouragement. I think tonight's the night.
I'll try and log my procedures and steps and make note of anything I run into for future noobs like me I might be able to help..that's how community works, right?
Wish me luck!
Good luck
One more tip: If you find that Market keeps crashing after you flash fjfalcon's ROM, flash this updated Google Apps package - gapps-gb-20111216 (dl link here).
It worked for me. Put the zip file on the sdcard right next to the ROM file and flash it just like the ROM file.
PS: Who's James?
Ah BuddyBud sorry, there is another Canadian Wind guy named Biker Bob (real name James) who was posting about his experiences in another thread, and I mixed the two of you up..
About to try this...couple questions
Has anyone watched/used Reverend's tutorial video? Results?
I don't need to unlock the phone first, right? Please tell me no, I just got it! lol
The Revs videos are a good reference & if you are talking about a sim unlock that's not necessary.
Yes Revs videos are good to show.a visual of what you should do. Don't worry about it. I know it is scary the first time but once you do it, it will become second nature. Don't forget to wipe cache, dalvik and factory reset. If you bootloop, that is probably why.
No you don't need to be unlocked. That just deals with carriers and not ROMs.
Im on the edge of the decision precipice..am not too nervous about doing this, as in fact I'm pretty technically proficient..it just seemed that this process was a bit more convoluted than the one I picked up on easily for the LG.
Decisions decisions...6.3 or go all the way to 7.1
I think I need stability...and I'm not sure I want to get into a whole bunch of swapping locations etc. I noticed The Reverend mentioned he didn't bother with swaps. Mind you, I don't even think he made an ext partition either, which boggles my mind, I was almost sure you had to make at least one for any custom ROM. I might be showing just how little I know here! lol
Is it just that 7.1 is more of an ongoing thing, or by now are most of the +/- s of both pretty much on par? I know, I should be reading all 78 pages of the damn thread, right??
Oh boy, I just read through the Bravo thread...and the LED notification sounds SOOO tempting. No LED notification bugged the hell outta me on the LG. Hmmmm...
Ok...have settled on the ROM in this thread (Bravo):
http://forum.xda-developers.com/showthread.php?t=1332410
I just want to make sure of one thing...the VERY helpful steps that you all have outlined ie BuddyBuds...they stay the same up to step 4 (ROM + update) no matter what ROM I choose, pretty much.
Brians instructions are just a slight bit confusing in that Im not sure if I have to apply just the most recent update for LED ie v1.6...or if I have to install ALL the updates from the start on up (I think there are 4 of them). To me it would seem logical that each new version would be cumulative ie include the stuff from previous versions...but I just want to make sure!
One more thing..I didnt notice any mention of gapps in the download in that thread (nor did I see a gapps apk in the files I unzipped, but might have missed it..)...if not, Ill need to apply that too, right..any special version to useÉ
Ok so...
I went with Brian's BRAVO. I followed some of the steps provided in this thread, coupled with Reverand's video. I used his OpenRecovery install method (ie original from the Dexter build, copy new over top that) because I've never installed OpenRecovery before and it just seemed confusing on other threads.
To root, I used UltimateAndroot, in order to have the ability to unroot the machine (you'll see why...)
The first thing I checked, of course, was the pull down power/status bar to see about turning off various connections (ie Wifi, Bluetooth, Refresh, Mobile Data, etc). Unlike other 2.2 Froyo's I've used, specifically..LG..there is no pull down/status bar. Damn. Went thru every Setting imaginable, but won't work. This isn't looking great.
Next thing I tested was my 3G/Wifi issue. To my dismay...the issue remains. Browser and apps are still trying to use 3G first and foremost, as far as I can see. How do I know? Because if I leave Data Network Settting to "Allowed", browser/apps work, and *seem to be using the WiFi, but the second the 3G signal fades or is dropped, I get connection issues, and WiFi is still on. If I turn Data Network Setting to "Not Allowed", it might/might not use the WiFi for a bit and then pretty consistently stop. When I mean "stop", I mean the phone is still showing connected to WiFi yet there are data connection errors on all browsers/apps that need data etc. Sometimes, if the 3G signal returns, I get the pop-up asking me to Allow the data, and if I say yes it works for a bit (but then, because of the 3G signal issue, it cuts out again).
The fix - again - turn on Airplane mode, which disconnects all connections, turn on WiFi, then go back into Call Settings and search for the Home Network again. This is crazy, I can't do this every time, and eventually it craps out again and I have to do it all over.
The other really frustrating thing is I powered it down to do a full recharge overnight...when I booted back up it didn't find my Home Network at all and I had to rescan for it. Testing that out, sure enough, rebooting the phone I have to reselect the Network. Argh.
Any thoughts? The whole necessity of being able to turn 3G data off is so I can avoid this very problem. Basically, I walk in my front door, turn off data over the mobile network, and let my WiFi do it all while I'm home. I wish I could do this as effectively as with my LG on 2.2 (and later, CM7)
acrobat69 said:
Ok...have settled on the ROM in this thread (Bravo):
http://forum.xda-developers.com/showthread.php?t=1332410
I just want to make sure of one thing...the VERY helpful steps that you all have outlined ie BuddyBuds...they stay the same up to step 4 (ROM + update) no matter what ROM I choose, pretty much.
Click to expand...
Click to collapse
Once you get to step 4 inn Buddy's list check out this. It will explain it a little bit better. Brought someone back from the brink on this thread. Where is says Dexter, just replace that with Bravo.
Brians instructions are just a slight bit confusing in that Im not sure if I have to apply just the most recent update for LED ie v1.6...or if I have to install ALL the updates from the start on up (I think there are 4 of them). To me it would seem logical that each new version would be cumulative ie include the stuff from previous versions...but I just want to make sure!
Click to expand...
Click to collapse
Per Brian's OP the v1.9 has all the patches.
v1.9,A new Nandroid IMG backup,All patches included(20111217).
Click to expand...
Click to collapse
One more thing..I didnt notice any mention of gapps in the download in that thread (nor did I see a gapps apk in the files I unzipped, but might have missed it..)...if not, Ill need to apply that too, right..any special version to useÉ
Click to expand...
Click to collapse
Gapps is for CM builds. Bravo is a 2.2 build.
Side note: If you are going to partition it is up to you. I and a few other don't but it is really a personal preference. When I did, I used MiniTool Partition Wizard and it worked like a charm.
A few things though:
1: Your partitions must be set up this way---> Fat then EXT2/3 then Swap (if you choose-I don't and never did-requires you to fastboot a custom kernel and since this is your first experience, I would not suggest it)
2: Sizes. Many noobs will set their EXT2/3 partition to 1gb. That is way too big and you are just wasting space. I find that somewhere between 350-400mb is more than enough.
3: Do not convert your Ext partition to EXT4 unless the ROM you choose supports it. If/when the time comes, use MZ's open recovery utility to do it and not GPArted or MiniTool. The creat a Hugefile that has to be deleted and is a PITA.
4: If you do decide to partition, you will have to boot up fully, then go into your root explorer and in the SD-ext, you will need to create a folder called App (not apps-no S) so it will look like this sdcard/sdext/app. Then reboot and your apps will auto-install there.
Sorry for the long post and good luck.
---------- Post added at 11:30 AM ---------- Previous post was at 10:42 AM ----------
acrobat69 said:
Any thoughts? The whole necessity of being able to turn 3G data off is so I can avoid this very problem. Basically, I walk in my front door, turn off data over the mobile network, and let my WiFi do it all while I'm home. I wish I could do this as effectively as with my LG on 2.2 (and later, CM7)
Click to expand...
Click to collapse
Once you click on WIFI it should take over as your primary source of data. Not sure why unless I think I might have figured it out. Go into settings>wireless>tick your WIFI and once your router pops up leave it alone and hit your menu button. Set your WIFI sleep policy to NEVER and I bet that takes care of it. Pretty sure that is toggling off your WIFI when 3g is present.
Other solution is Widgetsoid and Elixir both have a widget to toggle off data (so does Beautiful widgets too for that matter). You can use those but I really think the above solution should work for you.
Woodrube said:
Per Brian's OP the v1.9 has all the patches.
Click to expand...
Click to collapse
Ah, figured..however when I go into LED Notification, it says "revision 1.6" (or some wording to that effect) at the bottom. Maybe that's just an error, but I just used that to gauge whether or not I had installed the latest revisions etc.
LED Notification works for text messages. I haven't seen it work for calls yet, but maybe I'm doing something wrong. I call the phone, the screen lights up that there's a call, and then ultimately closes when noone answers it. It was at this point that I'd assume the LED notification would come on. Screen is out, so LED, right?
Woodrube said:
Gapps is for CM builds. Bravo is a 2.2 build.
Click to expand...
Click to collapse
Ok I guess I goofed then, because I tried to update with Gapps after I installed Bravo. One thing I noticed is that I wasn't prompted to sign up/into my Google accounts or set up the phone when I rebooted following the Bravo ROM + Gapps install..that had always happened on my LG when I did CM installs...your explanation makes sense!
But...isn't CM6 basically 2.2 and Bravo basically 2.2? Or maybe I misread that.
At any rate, the real reason I updated Gapps is because I wanted the "new" Market look. I don't like the old one very much, really like the My Apps function. Is there way I can just patch this in to Bravo?
Woodrube said:
Side note: If you are going to partition it is up to you. I and a few other don't but it is really a personal preference.
Click to expand...
Click to collapse
Why do people partition? I did it on my LG, but never used it. Partitioning has nothing to do with installing user apps to the SD card, right? I can do that anyways, true?
Speaking of which..in CM there is the ability to set the default install location. I searched to find something similar in Bravo, to no avail. Is there a way to do this?
Wait...I think you just gave me the answer to both these questions...duh me..
Woodrube said:
4: If you do decide to partition, you will have to boot up fully, then go into your root explorer and in the SD-ext, you will need to create a folder called App (not apps-no S) so it will look like this sdcard/sdext/app. Then reboot and your apps will auto-install there.
Click to expand...
Click to collapse
I guess I do in fact want to partition, then. I can't imagine how one wouldn't want to, I mean you don't want apps clogging up internal memory, right?
Woodrube said:
Sorry for the long post and good luck.
Click to expand...
Click to collapse
Never apologize for long posts...I'm the worst at it and I love pouring over every single last detail. I'm sure there are lurkers who appreciate also, I know I really did when learning on my LG. Thanks a million!!
Woodrube said:
Once you click on WIFI it should take over as your primary source of data. Not sure why unless I think I might have figured it out. Go into settings>wireless>tick your WIFI and once your router pops up leave it alone and hit your menu button. Set your WIFI sleep policy to NEVER and I bet that takes care of it. Pretty sure that is toggling off your WIFI when 3g is present.
Other solution is Widgetsoid and Elixir both have a widget to toggle off data (so does Beautiful widgets too for that matter). You can use those but I really think the above solution should work for you.
Click to expand...
Click to collapse
DOHHHHH!!!! I knew I had forgotten something about past settings that made my LG work so well.. I have modified the Wi-Fi sleep policy and hopefully it will work better now! One constant in all the issues I was having, now that you've mentioned this, is that the screen was sleeping/timing out while things were going on. I'd bring it back up, and be all "like, wtf" when my browser wouldn't work or apps that were downloading hung, etc. Mind you, it probably should have reconnected by itself, but whatever, if it doesn't, there's no harm in using Never Sleep for WiFi. I'm not that much of a stickler for battery usage. I go to bed, I charge the phone, I wake up, repeat. I don't need 4 days battery life and if I ever am in a situation where I do, I'm camping or somewhere remote ie no WiFi hence this doesn't apply as I'd just toggle WiFi off completely anyways.
You're right, I could use a Widget to manage my connections and I managed to grab Beautiful when it was 10 cents..but those reside on the screen and I would love to get that pull-down bar back, just so handy to drag down no matter what app/screen you're in...I know, I'm picky
You know what? I got a Notification Toggle app on my PC at home that I'll upload here tonight. I just remembered it while I was at lunch. It is from an older ROM so not sure it will work but worth a try. Usual directions. Push it to /system/apps reboot. It should be just what you are looking for if it works. Might not though so you'll just have to see.
CM6 is 2.2 and so is Bravo only Bravo was made from the official Korean update that was handed down and Mioze has created the CM6 from source. So yes they are both 2.2 but very different.
Edit: I have the latest Market.apk too. It is floating around here somewhere but I can't find in for some reason. I'll upload them tonight.
acrobat69 said:
Decisions decisions...6.3 or go all the way to 7.1
Click to expand...
Click to collapse
try them both first, then see which one you want to use as your daily driver.
i personally like the 6.3 better because it runs the fastest even on stock speed 720 Mhz
you can use Open Recovery to do a full backup, and switch back and forth between 7.1 and 6.3 until you decide which one you like best
7.1 has more themes to choose from and is more up to date, but... less free resources vs. 6.3 which is indirectly related to why it feels less quick than 6.3
7.1 feels similar to the speed you get on the stock ROM from Wind, 6.3 feels like a brand new device
ok, so weird issue for me.. and idk if anyone else is experiencing it cause it doesn't seem like it.. I'm getting wifi error (and before anyone says anything about my router, it's already configured). It just won't turn on no matter what. I hit it, it says a grayed out "Turning On..." and then error again. No attempt or anything. I go into wifi settings and everything under Wi-Fi is grayed out, that's the network notification at&t wifi hot spot setting and wifi networks. I've been trying hard and absolutely no resolution. A google search only affords me more "fixes" for my router and that's not the issue. If i can get a referral somewhere else that doesn't talk about the router being the issue then i'd greatly appreciate it.
**update**
sorry for the "vote for.." whatever it says, i didn't mean to i was trying to subscribe so please don't get upset about it. kthksgb
Vahnyyz said:
ok, so weird issue for me.. and idk if anyone else is experiencing it cause it doesn't seem like it.. I'm getting wifi error (and before anyone says anything about my router, it's already configured). It just won't turn on no matter what. I hit it, it says a grayed out "Turning On..." and then error again. No attempt or anything. I go into wifi settings and everything under Wi-Fi is grayed out, that's the network notification at&t wifi hot spot setting and wifi networks. I've been trying hard and absolutely no resolution. A google search only affords me more "fixes" for my router and that's not the issue. If i can get a referral somewhere else that doesn't talk about the router being the issue then i'd greatly appreciate it.
**update**
sorry for the "vote for.." whatever it says, i didn't mean to i was trying to subscribe so please don't get upset about it. kthksgb
Click to expand...
Click to collapse
I've never heard of that error before so I don't know. Are you rooted? What version of Android are you running? What I'd do is backup all your apps, text messgs, contacts, etc., and do a factory reset and see if that fixes it. Worst case scenario you could flash a fresh new version of 2.3.5 via RSD Lite and you'd almost surely have the problem fixed, unless it's a hardware issue.
I actually started off on 2.3.5 with the issue, and then i started having problems with my ability to actually get past FB, so i had to do a the rsd fix where i force stock on there again. From that point since it still wasn't working I went and pushed ota which took forever and got onto blaze hoping/praying that it would finally work after that. ultimately nothing worked so I'm here now at the mercy of the forum hoping some guru might have something that I could try.
Vahnyyz said:
I actually started off on 2.3.5 with the issue, and then i started having problems with my ability to actually get past FB, so i had to do a the rsd fix where i force stock on there again. From that point since it still wasn't working I went and pushed ota which took forever and got onto blaze hoping/praying that it would finally work after that. ultimately nothing worked so I'm here now at the mercy of the forum hoping some guru might have something that I could try.
Click to expand...
Click to collapse
Wow brother, if you flashed the 2.3.5 fxz to it and still had the problem, i'm thinking there's a hardware issue.
yea, i figured. so i've already contacted motorola and since i'm still under warranty i can return it and they'll send me another one. them's the break, but i got 2 weeks before i even have to decide on that so its not something i'm rushing towards lol
Try going to adb shell
su
ifconfig tiwlan0 down
(toggle airplane on then off)
ifconfig tiwlan0 up
(toggle airplane on then off)
Maybe that will bring your adapter back up. Hope that helps.
hope this doesn't mean anything bad, but it says error no such device
i did adb shell in cmd prompt, it started up went [email protected] then i did su and it changed to [email protected] and i did what you said.. and it gave me that error
Had the same error problem a few ago using blaze v3 rom. After reboot, it was solved and I could connect to my wifi again.
Have no idea what caused the problem, as I didn't do anything out of the ordinary with the device since the update from blaze 2.5.
Sent from my MB865 using XDA
I am facing same issue on Droid 3. it does not work with Stock ROM, but works with CM9 or AOKP based rom.
wifi error afterusing motofast fast script 2.3.5
i am having the same problem also. it just started right after i did the "flash back to 2.3.5 moto fast script" the first time i used it everything was fine but this time ..which i did the same process....i am getting that same error.and when i try to ota to 2.3.6 it says that i need to turn on wifi ????since then i have tried factory reset and still had the issue.then i rooted 2.3.5 and using cwm i was able to restore a backup.so now i am back on 2.3.6 and i am still having the same problem.i have tried a few wifi fixer apps from the playstore but nothing seems to work. and i still dosnt want to OTA without wifi working :confused........so it seems like there is something nthat went wrong with the motofast script or something got erased ???i hope this will help to try and figure out a solution ......btw im new to this somewhat so please bare with me
trev1134 said:
i am having the same problem also. it just started right after i did the "flash back to 2.3.5 moto fast script" the first time i used it everything was fine but this time ..which i did the same process....i am getting that same error.and when i try to ota to 2.3.6 it says that i need to turn on wifi ????since then i have tried factory reset and still had the issue.then i rooted 2.3.5 and using cwm i was able to restore a backup.so now i am back on 2.3.6 and i am still having the same problem.i have tried a few wifi fixer apps from the playstore but nothing seems to work. and i still dosnt want to OTA without wifi working :confused........so it seems like there is something nthat went wrong with the motofast script or something got erased ???i hope this will help to try and figure out a solution ......btw im new to this somewhat so please bare with me
Click to expand...
Click to collapse
only once did i have problem with wifi on this phone and i never fixed it on 2.3 ...
after a lot of trial and error though, i got it fixed with upgrading to ics.
other than that, does your bluetooth do the same? because symptoms like these usually mean water damage. you might want to check the indicators, (if the a2 has any) --- if you broke your wifi by updating rom, this probably isnt the case.
I noticed that the description for the wlan interface is different in the build.prop between GB and ICS. So you might check your /system/build.prop.
Look for this towards the top of your build.prop
Code:
# wlan interface
wifi.interface = tiwlan0
softap.interface = tiap0
In GB wifi.interface = tiwlan0
In ICS wifi.interace = wlan0
So make sure the value is correct, if the value is wrong it will show your wifi "greyed out" in the settings. Anyway, it's something to try, and I hope that helps. If you change the value, make sure you reboot then check to see if it is fixed.
Since I don't know if anyone is still looking into this at all because I haven't seen many updates to this thread, I'm wondering if anyone has checked the kernal information. I was able to do some searching (btw I haven't sent in my atrix 2 in yet because of work) and I found that there was some issues in regards to the Kernal. I don't know if thats true or not but I would like to see someone test it out or try it out or what have you and see if they can shed some light on the situation because the situation is rather bleek, and i'd rather not have to send in a perfectly good phone that was working just fine before the flash, and still wouldn't work after reflashing the AT&T rom.
Alright,
So I got the One X yesterday and the first thing I did was root it. After that, I followed the guides for removing the ATT branding, reactivating the FM radio, and removing the att wifi default network, and then theming and skinning it. I turned off wifi last night to test out the LTE network, and then tried to reactivate it this morning. When I say try, I click the wifi toggle and it replies "Error". Has anyone encountered this/knows how to fix it? Thanks in advance!
Happened to me once or twice...also happened to me a few times on my Captivate (running CM9).
A reboot should bring things back to normal. I'm not sure if this has anything to do with the wifi issues half the people here are complaining about since I haven't been paying too much attention to that issue.
Move up to 1.82 to fix the error. I had the same.
Tried reboots. No joy. Ill try to upgrade to 1.82, but it will have to wait until after class. What would be the best way to preserve application arrangement/theming, or am I SOL on that one?
ZombieLinux said:
Alright,
So I got the One X yesterday and the first thing I did was root it. After that, I followed the guides for removing the ATT branding, reactivating the FM radio, and removing the att wifi default network, and then theming and skinning it. I turned off wifi last night to test out the LTE network, and then tried to reactivate it this morning. When I say try, I click the wifi toggle and it replies "Error". Has anyone encountered this/knows how to fix it? Thanks in advance!
Click to expand...
Click to collapse
Have a similar problem. Happened when I edited the wpa_supplicant.conf file in /data/misc/wifi. It was meant to prevent auto connect to AT&T hotspots but ended up giving me an error after a reboot.
To fix it, open the file in text editor and make a change, either add a blank line or remove one and save it. Also, delete the wpa_supplicant.conf.bak file in the same folder..
I have no clue why this is happening and one of the above steps may not be doing anything but when I do that, my wifi works again until next reboot.
Good luck
Thanks the update to 1.82 solved the problem.
wpa_supplicant.conf
ZombieLinux said:
Thanks the update to 1.82 solved the problem.
Click to expand...
Click to collapse
In case anyone else is having this problem and is already on the 1.82 update, or if that didn't fix it...
You can delete /data/misc/wifi/wpa_supplicant.conf.
That may fix the problem. Somehow my wpa_supplicant became corrupt I guess and deleting that solved my problem.
I have a one S, but that shouldn't change much.
I have been on Sky ICS ROM for quite a while now, and it has the Google Now and voice search for ICS in it and it has worked up until a few weeks ago. When I voice search for anything, my browser will open and display an error saying "We're sorry, but your computer or network may be sending automated queries. To protect our users we can't process your request right now." Strange thing is, it's not consistent. Sometimes it will work fine, then suddenly gives me that error. I have tried flashing back to stock then reflashing Sky ICS from scratch...same thing. Any ideas what could be wrong? Is it my phone, or is something going on on Google's end?
I've had this problem happen to me a few times, not exactly sure what causes it but only (statistically) happen when I update CM10 with the OTA updater. If I do it manually and include clearing the caches it usually fixes it self, then after that I just fix permissions after reboot.
But yeah I've had that notice popup while I was on data.
Just noticed new quirk with it. It doesn't error out when I'm on WiFi, only when I'm on the mobile network (AT&T). Very strange. I checked the APN settings and everything looks good. Can't think of anything else that could be wrong.
I am STILL trying to figure out why I keep getting this message. I've tried full wipes, flashing back to stock, flashed both bases of Sky ICS, and I am still getting same error message more times than not. I have tried searching online and in these forums for any answers but can't find any. Seems to be either working for everyone else, or the problems they have had are different then mine. Am I really the only one? Does anyone have any ideas?
D-GTI38 said:
I am STILL trying to figure out why I keep getting this message. I've tried full wipes, flashing back to stock, flashed both bases of Sky ICS, and I am still getting same error message more times than not. I have tried searching online and in these forums for any answers but can't find any. Seems to be either working for everyone else, or the problems they have had are different then mine. Am I really the only one? Does anyone have any ideas?
Click to expand...
Click to collapse
It's a jb feature and your on a hacked up ics version. It's bound to screw up. Use a real jb rom If you need it that badly.
Sent from my GT-P5113 using Tapatalk 2
D-GTI38 said:
Just noticed new quirk with it. It doesn't error out when I'm on WiFi, only when I'm on the mobile network (AT&T). Very strange. I checked the APN settings and everything looks good. Can't think of anything else that could be wrong.
Click to expand...
Click to collapse
I was attempting to find the cause of getting this same message from google search. Same symptoms, works great on wifi, sporadically throws this error on data connection. Just so you know, I'm on an HTC Vivid, Holics ICS with Google Now, AT&T.
I am at least more confident that I am not infected with malware....
Still can't argue against you, xcrazydx.
Just FYI, not limited to your device...or mine it would seem....