recently rooted My Phone but i would like to put it back to factory settings, i thought i had done it but when i connected it to Kies, its still saying that it cant be updated through there any help will be appreciated thanks
Flash a stock ROM and Recovery using ODIN then using a USB jig reset the download counter (not essential however it means if something goes wrong you can get it repaired under warranty)
Max. (From my Galaxy 2)
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Related
Hi guyz,
I'm new with rooting, and flashing.
I've downloaded feamod recovery for the i9001. But when I was done with flashing via odin, and I started up my phone, you see the samsung screen, and then he is download mode. But i can't just start up my phone, I think it is soft bricked, but how can I fix this? Should I send it to samsung to repair it, and how much money will that cost? I already tried to flash again, but it didnt work. Help me please!
Kind regards, nikosb10
Please use the Q&A Forum for questions Thanks
Moving to Q&A
If you can get it into recovery mode and download mode you can fix the softbrick yourself.
Either put the stock **** back on your phone leaving you with an unrommed phone
Or, USB jig it they are only a £5 or $6
Hi.
i have been on every thread i found with the same kind of title, or that the search engine found but i cant relate to those problems since everyone has been fiddling with their phones in order to get this message.
i was updating my samsung xcover vith kies when the update failed (due to bad cable) now i get the error message on my phone
"Firmware upgrade encountered an issue. Please select recovery mode in kies & try again"
i read somewhere that this is "download mode" but im not shure and i dont really know what to do here.
kies wont connect with the phone and the phone wont appear in the recovery tool.
any help would be great!
The phone i have is a Galaxy Xcover with stock firmware
Any help would be great!
Thank you on beforehand
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
i got this problem too!
you can try to put the good drivers (samsung mobiles) on your computer.
i had the same problem but i flash it back to stock
flash your phone back to the stock rom that the phone came with that is the way i went with my problem and it worked.
I have a rooted Galaxy S3 from Verizon with CWM and rom manager installed. I used Rom Manager to install CyanogenMod 10 and it restarted my device. It now is stuck in a bootloop. Even when I power it down the phone turns on automatically and continues to bootloop.I cant seem to open CWM, although I was able to get Odin open but it had its own infinate downloading screen. My phone is completely useless right now and I would really love to be able to use it tomorrow.
Update
Okay turns out Odin actually works. If someone could help me use Odin to unroot my android or at least fix the root that would be great.
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Try flashing the stock firmaware using the odin and then try rooting.
I had been running cwm on my i7337m s4 and decided to change to twrp because I was having problems flashing cm11
twrp did not work to flash cm11 either so i decided to go back to cwm using the app. I tried to boot into cwm recovery using the app but each time it went back to twrp recovery. So I thought I could use mobile odin pro to flash the cwm .tar file. When i tried to flash cwm using mobile odin my phone soft bricked. I think it's a soft brick at least, I can get into download (odin) mode but not into any recovery mode. I know how to fix a soft brick using pc odin but for some reason my s4 will not connect to my pc. I don't believe it is a driver issue as I have other s4's and s3's that will connect. I use the same cord and same usb port but have tried changing them.
Any advice is appreciated
Edit~
I tried connecting to another computer and still nothing. Both computers recognize my other s4 and s3
Hi,
I suggest you ask here in your device section,
> AT&T, Canadian Bell, Rogers, Telus, Virgin Samsung Galaxy S 4 > AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshooting
Good luck!
Thread closed. Thank you.
Hey Guys,
I am not sure if this is in the right thread but I need help with my Samsung Galaxy Note 10.1, 2012 edition, GT-N8010 16gb wifi model. I flashed it about a year ago with a custom ROM and it was working 100%. It hasn't been used in a while and this happened when I turned it on after a it wasn't used for a few weeks. It currently cannot get past the samsung logo when I start it up. If I start it holding the volume and power button I can get it to Odin mode/download mode where the screen says, "Downloading, Do not turn off target!!" In the top corner it says that the current binary is custom and the system status is official and finally RP SWREV: A2.
I have flashed this with stock software AND a custom Rom with Odin 3.9 and whilst flashing I can see a status bar going across the screen and then Odin say Pass and reboots the tablet but the reboot stalls at the samsung logo. I have also tried to flash CWM and again, Odin says pass but still not getting past the boot logo. When I flashed a stock ROMI think the current binary changes to samsung official, or maybe the system status says samsung official, either way it seems like Odin is successful but yet I still don't get a successful boot.
Should I flash a pit file? To be honest I am not quite sure what that would do, I know as much to say a pit file will repartition but beyond that I really have no idea what a pit file is, or where to get a 100% legitimate one as I know it is incredibly risky.
Seeing as how Odin recognises the tablet I am confident I have not bricked it, softbrick maybe, but surely something can be done to get this up and running due to the fact I can still send and receive a signal through usb? One question I have is, now that i have flashed a custom ROM and stock ROM without any success would USB Debugging be deactivated due to the new stock ROM?
I have got the profession version of Skipsoft Toolkit for this model but cannot seem to make any headway.
Sorry about the long post but I wanted to get all the details in for you guys to reduce the questions going back and forth. Any help would be HUGELY appreciated.
Thanks a million in advance!!!!
Hi
Thanks for writing to us at XDA Assist. I can see you've already posted the same topic in the Note q&a section here:
Samsung Note 10.1 (2012) Stuck on logo. HELP PLEASE!!!
Please refer to the XDA Forum Rules for information regarding the creation of duplicate posts/threads. That thread is in the right place, it's just a matter of waiting for someone to come to the thread and help you out now.
Good luck!
Thread closed.