Disclaimer : I AM NOT RESPONSIBLE IF YOU BRICK YOUR DEVICE
This is a mod that i have made for deodexed ddkp2. Nothing new from my side only edited the framework.jar file according to the instructions in this link.forum.xda-developers.com/showthread.php?t=1411317
So all the credits goes to AndroidOn.....!!!
Instructions:
1. You must have deodexed ddkp2. If you are not deodexed follow this threadforum.xda-developers.com/showthread.php?t=1323661
2. Extract and Copy the attatched framework.jar and replace it to system\framework
3. Set permissions to rw-,r--,r--
4. Reboot( easy method press home button then press volume down button ). Booting takes some more time.
Wow...great buddy. Have u tested it? Also can u creat it for xxkpq?
This thread must be in development section.
nice........
vishal24387 said:
Wow...great buddy. Have u tested it? Also can u creat it for xxkpq?
This thread must be in development section.
Click to expand...
Click to collapse
Ya i tested it. it works media volume becomes level 30 only in settings-sound. But in musicplayer its 15. I was a little bit confused whether to start the thread in development or theme section. Finally decided to keep the development area clean. I dont have xxkpq. PM me xxkpq framework.jar i will modify it.
Sent from my GT-I9003
I did it for KPQ. You can add it in first post, if you give credits to me
http://www.multiupload.com/CQ40XJ1NB3
Tested in KPQ.. working flawlessly.. thanks..
Sent from my GT-I9003
for DXKP9
You can add this one too for DXKP9
I made it as a flashable zip. Just flash the zip file thru CWM Recovery.
Nice find
And thanks so me.
Slynightdark said:
I did it for KPQ. You can add it in first post, if you give credits to me
http://www.multiupload.com/CQ40XJ1NB3
Click to expand...
Click to collapse
buggy on KPQ... media volume turns to max halfway through the increasing bar.. mutes, rises to a level and drops to mute again when the media volume bar is at max.
and about smooth scroll.. i dint notice any difference.. ???
Lol, that the same thing I posted two weeks ago (29th dec) in the general section, but nobody got interrested in it. First as question, then with update.zip: [MOD] Better Smooth Scroll + update.zip for deodexed XXKPQ
Download Better Smooth Scroll Mod for XXKPQ (deodexed)
Taraen said:
Lol, that the same thing I posted two weeks ago (29th dec) in the general section, but nobody got interrested in it. First as question, then with update.zip: [MOD] Better Smooth Scroll + update.zip for deodexed XXKPQ
Download Better Smooth Scroll Mod for XXKPQ (deodexed)
Click to expand...
Click to collapse
Sorry man, I will delete my mod and people will use yours, sorry :S
chinmay_7d said:
buggy on KPQ... media volume turns to max halfway through the increasing bar.. mutes, rises to a level and drops to mute again when the media volume bar is at max.
and about smooth scroll.. i dint notice any difference.. ???
Click to expand...
Click to collapse
Ya for me also it mutes halfway and then increase to maximum. And for smoothscroll cant feel any difference...
send from gt-i9003 using android keyboard
MOD Increase Volume Gaps Buggy
Same scenario here...
I removed the mod increase volume gaps but retain the mod smooth scrolling.
And managed to make a flashable zip for DXKP9.
You can put this in your first post if you like.
And thanks so me.
replaced the original framework.jar...
Ok, sorry if my version was buggy, I couldn't test it because I don't have the phone with me, you can use Taraen's mod, mine is removed
Hello.
Just to know what smooth scroll for?
Sent from my GT-I9003
Nice work srilipta
Related
Hello Friends,
Here i'm with a updated camera.apk
A very big thanks to
Rafalense
Vishwanath Patil
Gizmodroid
Wilfred ( ME )
This apk has most of the features some from vishwanath patil's MOD and the rest done by me
Low Battery Hack (can be used even if your battery is less than 15%)
Shutter hack (Power button acts as Shutter button)
Call In (can be used while on call)
Audio frequency increased from 16000Hz to 44100Hz
Audio channels increased from mono(1 channel) to stereo(2 channel)
Superfine quality has been increased heavily
Audio bitrate increased to 128kbps AAC
Maximum framerate has been increased to 30fps
THIS ONLY WORKS ON STOCK CUSTOM ROMS..... DOESN'T WORK ON CM..... SO DONT TRY IT IF U R ON CM.....
Instructions For Installing:
1.Download and extract the folder from the zip
2.Connect your mobile through the USB cable
3.Click "INSTALL.bat" file and wait till the command prompt box closes
4.There u r
Download Link:
http://www.2shared.com/file/S2DDMgFP/Camera_MOD_for_G-FIT.html
http://www.4shared.com/zip/mbHy077S/Camera_MOD_for_G-FIT.html
http://www.mediafire.com/?4t8epr35ul0ciia
Request:
While Clicking thanks on my post pls press thanks to those mentioned above (it wouldnt hav been possible for me to do it without them)
Reserved
If someone could make an CWM flashable zip.... Pls do make one and upload it here
Thread updated with three workin links (2shared,4shared,mediafire) check all three before posting "link not workin :/ ")
wilfredcool007 said:
Hello Friends,
Here i'm with a updated camera.apk
A very big thanks to
Rafalense (http://forum.xda-developers.com/member.php?u=1225388)
Vishwanth Patil (http://forum.xda-developers.com/member.php?u=1806662)
Gizmodroid (http://forum.xda-developers.com/member.php?u=2577325)
Wilfred ( ME )
This apk has most of the features some from vishwanath patil's MOD and the rest done by me
Low Battery Hack (can be used even if your battery is less than 15%)
Shutter hack (Power button acts as Shutter button)
Call In (can be used while on call)
Audio frequency increased from 16000Hz to 44100Hz
Audio channels increased from mono(1 channel) to stereo(2 channel)
Superfine quality has been increased heavily
Audio bitrate increased to 128kbps AAC
Maximum framerate has been increased to 30fps
THIS ONLY WORKS ON STOCK CUSTOM ROMS..... DOESN'T WORK ON CM..... SO DONT TRY IT IF U R ON CM.....
Instructions For Installing:
1.Download and extract the folder from the zip
2.Connect your mobile through the USB cable
3.Click "INSTALL.bat" file and wait till the command prompt box closes
4.There u r
Download Link:
http://www.2shared.com/file/S2DDMgFP/Camera_MOD_for_G-FIT.html
Request:
While Clicking thanks on my post pls press thanks to those mentioned above (it wouldnt hav been possible for me to do it without them)
Click to expand...
Click to collapse
Nice!!!! can i use it on STOCK ROM? or need to be ext4? or support for int.d?
Deshabilitado said:
Nice!!!! can i use it on STOCK ROM? or need to be ext4? or support for int.d?
Click to expand...
Click to collapse
U can use it on the stock ROM and der r no limitations apart from that
grt...!!!
Here is d update.zip (flashable through cwm..)
c d attachment upladed
rajrocks said:
Here is d update.zip (flashable through cwm..)
GRAB IT
Click to expand...
Click to collapse
Thank u rr
rajrocks said:
Here is d update.zip (flashable through cwm..)
GRAB IT
Click to expand...
Click to collapse
thx Rishee!!! i dont have cwm atm, just normal recovery, can i flash it with it or not?
Deshabilitado said:
thx Rishee!!! i dont have cwm atm, just normal recovery, can i flash it with it or not?
Click to expand...
Click to collapse
Yes u can do it via normal recovery itself
Thanx Needed That Button Feature..
Already Pressed on Thanks.
Can you Please make a mod For Cyanogenmod !
i flashed it but the power button just lock the screen, i think it didnt work for me
The link is not working
Sent from my PC36100 using xda premium
rajrocks said:
Here is d update.zip (flashable through cwm..)
GRAB IT
Click to expand...
Click to collapse
Is there any other link? This link is not working. Thanks
Sent from my PC36100 using xda premium
Deshabilitado said:
i flashed it but the power button just lock the screen, i think it didnt work for me
Click to expand...
Click to collapse
Check whether u hav flashed the file correctly.... or use the link which i gave which can be done thru the comp
rajnallan said:
Is there any other link? This link is not working. Thanks
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
use the link which i gave on the main thread which is supposed to be done through the computer
Camera Modded works for me.
ZmisiS said:
Camera Modded works for me.
Click to expand...
Click to collapse
Wow.. that sounds great.... did u do through ur computer or CWM
and which ROM r u in
I made a computer. It's OK.
Working for me also...
SAMSUNG GALAXY FIT
CREED's ROM v1.7.2
Very good work my friend..........
SGS-II ROM
This ROM is based on the Samsung Galaxy S II ROM DDKQ8 [2.3.6]
Initially ported to Galaxy Ace by Rushabh25(original thread) and then to Galaxy Fit by me.
Key Features
-Deodexed
-Zipaligned
-Pre-Rooted
-Pretty Smooth
-CRT animation off animation
-Beats Audio & Xloud preinstalled
-Modded Music Player for Beats UI
-Smooth Scroll
-Overclocked
-Hacked Hosts
-Galaxy Note/ SII(ICS) UI
-New lockscreen
-and many more
Flashing Instructions
Download the ZIP File to SD Card
Boot into CWM [Home + Power Key]
Choose Install ZIP from SD Card
Select the ZIP File
Download Link
MediaFire
http://www.mediafire.com/?gbcsp7fftkes1pz
Useful Links
CF-Root Kernel [Recommended]
NoFrills CPU Control
Quadrant Standard
Chainfire 3D
Do remember to press the Thanks button if you like the ROM.
Whats Working
Pretty Much, Everything
Known Bugs
-Boot Animation
-Music Player occupies 3/4th Screen
-Some Blank Area in the screenshots
-Contacts FC on opening Groups.
Please let me know if you find any more problems/bugs.
For Screenshots, Click Here
Credits
Rushabh25, for the ROM
tj_style, for the OC kernel
Patches & Fixes
-Gallery Fix
Aspire
Thanks for porting the rom on My request Love you
Cant wait for the Link Upload it fast............
Anyway we will be able to tell the exp of rom by tommarow
Upload failed at 54% Restarting.
Aspire said:
Upload failed at 54% Restarting.
Click to expand...
Click to collapse
Take your time.we can wait.
Wow..You mean this is a Samsung Galaxy S II ROM? Mind blown. xD Take your time sir! Will download as soon as the link appears. n_n Well done!
PREREQUISITE: can you even tell how to completely remove xloud so that ttpod and poweramp works! (none of the posts in xda actually ever works, they just tell how to disable it)
this is gonna be one of the best roms in terms of battery life as it is for ace too!
I can see a bit of blank space on right side of screenshots.is that gap also present in the rom??
No, the blank's there only in the screenshots.
Aspire said:
No, the blank's there only in the screenshots.
Click to expand...
Click to collapse
Nice!!!!!!!
are u using tj_style's andro-id kernel?
yeah since i used it to port this ROM... working on my own kernel though.
Link Updated.
3 minutes before finishing! n_n what baseband do you recommend sir Aspire?
It should work on all basebands.
Though, I tested it on DDKT1 only and it worked fine.
There's no boot animation, so don't be scared if screen goes blank...
must zry. cant wait to come home
Sent from my GT-S5670 using Tapatalk
Ayt Sir. Done downloading. Will now flash it and try. Be right back! n_n
you have a really good download speed
[MOD][DDLF2][UPDATED]Low Brightness, Swipe to Clear, 15 Toggle (2G/3G), BLN & CRT etc
Only for De-odexed DDLF2 ROM
You can find the Deodex Packages here and here
I request other devs to credit and link back to this thread if they use these mods in their cROMs.
I have never asked for thanks and I never will. All I ask is for proper credits and link back.
Includes:
Mod Pack 1:
1. Swipe to Clear Notifications
2. Arabic Support
3. Extended Power Menu
4. Smooth Scrolling Mod
5. SMS App Restrictions Removed
6. Optimized touch input
7. Removed "Swipe to Unlock" text from lock screen (English Users Only)
8. Some Build.prop tweaks and a Better Panel Background
Download
Mod Pack 2:
9. 14 Toggles (Modified for 100% Stock look): Download
10. Services.jar patched for LED Notifications and lights.omap3.so from CM9: Download
(Thanks to Dhiru and loSconosciuto)
Note: BLN works for everything except missed calls (?), I'll appreciate if any body can help to make it work 100%.
Mod Pack 3:
11. 1% Battery with stock look
12. CRT ON and OFF animation
Download
Mod Pack 4:
13. Low Brightness and Auto-Brightness Thanks to loSconosciuto
14. ICS Transitions
15. Lockscreen Charging Bug (By default it shows "Charging" instead of "Connect charger" when battery is lower than 20%)
Download
Mod Pack 5:
16. 15 Toggles (With 3G/2G Toggle)
Download
Update:
17. Fully working BLN (Thanks to loSconosciuto)
18. Categorized Settings (As in ICS)
Removed ICS Transitions for now (culprit for random reboots)
(If you still get random reboots please provide a log via alogcat, that would be really helpful)
Combined Mod Pack (All Mods) Update 2 : Download
Restore Original Updated: Download
To do:
1. Bounce animation in list view instead of over-scroll glow.
2. Call Recording
3. TSM Parts (Partially Working)
4. Network Mode Toggle with Data on.
How to:
1. Flash the zip through CWM.
2. Flash Mod Pack 1 followed by Mod Pack 2 for 14 toggles!
3. Flash Mod Pack 1 followed by Mod Pack 3 for 1% Battery and CRT Animation and so on.
4. For BLN flash BCK v14 fix followed by UC Kernel v15. (Wi-Fi Works!)
Tip:
1. To Swipe to clear notifications, try swiping from the middle of the notification.
2. Clear Dalvik Cache after applying the mod.
Reason for different mod packs is that I combine mods over one another as I feel the need for it. Therefore, one mod becomes dependent on other!
Flash in given order to avoid boot loop or FC!
Flash at your own risk!
Thank you very much for these mods! :good: :highfive: Now we need ICS theme for LF2
and 14 toggles. thanks mate.
please add 1% battery mod by ganesh and nonscrollable ext power menu.
http://forum.xda-developers.com/showpost.php?p=28218611&postcount=47
thx. mate.........:good:
I try this but get systemui FC
Hey dude, thanks for the mod, but what's the panel background?? .. I didn't quite get it..
It's a .9 PNG Backgroung used for popups for volume etc. I have attached a screen shot for better understanding.
ivAnash said:
Hey dude, thanks for the mod, but what's the panel background?? .. I didn't quite get it..
Click to expand...
Click to collapse
Added More Mods in OP.
Good job.....
Crt??????please add
I'll add CRT on and off in a short while. (Though I personally don't like CRT animation as it delays locking and unlocking)
ayush95gupta said:
Crt??????please add
Click to expand...
Click to collapse
mznk said:
Only for De-odexed DDLF2 ROM
3. For BLN flash BCK v14 fix followed by UC Kernel v15. (Wi-Fi Works!)[/B]
Flash at your own risk!
Click to expand...
Click to collapse
Do i need to flash the kernels first before your mod?
For LED notifications you'll need UC Kernel v15. For the rest of the mods any kernel with CWM will do.
jejemilo said:
Do i need to flash the kernels first before your mod?
Click to expand...
Click to collapse
Works great ,14 toggles look as good as stock,swipe to clear extended menu ,looks awesome,thanks.
If i apply 1% mod then the power menu doesnt pop up.. the phone just restarts... can u make a combined mod of everything into one.... so 14 toggle, swipe, 1% and ics animations, crt animation ... itd be great if you could come up with such a mod... thanks...
Sent From My Head To Yours Through a Lot Of Complicated Networks!
anziclone said:
If i apply 1% mod then the power menu doesnt pop up.. the phone just restarts... can u make a combined mod of everything into one.... so 14 toggle, swipe, 1% and ics animations, crt animation ... itd be great if you could come up with such a mod... thanks...
Sent From My Head To Yours Through a Lot Of Complicated Networks!
Click to expand...
Click to collapse
+1
anziclone said:
can u make a combined mod of everything into one....
Click to expand...
Click to collapse
rk7987 said:
+1
Click to expand...
Click to collapse
Updated the OP with more mods and a combined mod pack!
hello! thank you for the mods.:good:
I have a question when you say
"Reason for different mod packs is that I combine mods over one another as I feel the need for it. Therefore, one mod becomes dependent on other!"
Does it mean that I can't flash the mod pack ii without flashing previously the mod pack i? or is only for the features in the mod. hope i am clear.
I am interest in the toggle buttons mod!!!
regards
GPS Conf for India
my gps reception actually got worse after applying mod 1 ..
did anybody else face a similar problem??
btw mznk, thank u so much for the mods!
Yes, you'll have to apply Mod Pack 1 to get 14 toggles as it is dependent on Swipe to Clear Notifications mod.
One thing you can do is, take the framework.jar from Mod 1 and the rest of the files from 14 toggles mod and replace them with root explorer. That way you get Swipe to Clear and 14 Toggles.
2009sebastian said:
Does it mean that I can't flash the mod pack ii without flashing previously the mod pack i? or is only for the features in the mod. hope i am clear.
I am interest in the toggle buttons mod!!!
regards
Click to expand...
Click to collapse
Thanks for informing about the GPS problem, the config was working very well on DDKP3 but not on DDLF2. I have removed it for now and added a restore file. You can restore and apply the mod again.
shivanker.goel said:
my gps reception actually got worse after applying mod 1 ..
did anybody else face a similar problem??
btw mznk, thank u so much for the mods!
Click to expand...
Click to collapse
@mznk
Is there anyway to apply only the crt OFF animation and not the On thing??
and abt the gps.conf file, have u reverted back to stock or does the new file include any mods..
Extract and replace the framework-res.apk from zip for CRT OFF. To revert to stock gps.conf flash the restore pack and then the mods. (I have removed the mods with gps.conf file)
ivAnash said:
@mznk
Is there anyway to apply only the crt OFF animation and not the On thing??
and abt the gps.conf file, have u reverted back to stock or does the new file include any mods..
Click to expand...
Click to collapse
This is my first thread and I found mods all around xda that works for our phone
1. Dim behind Expanded Panel (by ammar786)
Working on CM10 roms
Instructions:
-put the SystemUI.apk into your system/app
-If SystemUI crashes, take out battery & power on
2. Kill All Task Mod (by TopDroid & Team Remics)
Working on Doomnexus V2 & CM10 by camcory
Instructions:
-Extract Kill_All_MOD_By_TopDroid.zip
-Open folder and go to data/sys-parts/app
-Copy SystemUI.apk & TaskManager.apk and put in your system/app
-If SystemUI crashes, take out battery & power on
If task manger is not working please use this
3. Galaxy Note Lock screen Style (by Adi_ai****eru)
Working on CM9 by arco68, Might work on Ivendor's CM9 & CM9 based roms
Instructions:
-Go to recovery mode
-Go to advanced and click on mount system
-Flash and reboot
4. Navigation Bar mod (by mrjraider)
Working on all CM9 & CM10 roms
Instructions can be found in the link
5. Blackberry 10 style Lock screen + Nav Bar Control (by Adi_ai****eru)
Tested on cm10 alpha 3 by ivendor
Instructions:
-Go to recovery
-Go to advanced and click on mount system
-Flash and reboot
6. Reloaded v.3 (by Adi_ai****eru)- check the link for features
Needs testers
Instructions can be found in the link
7. Reloaded ICS V.2 (by Adi_ai****eru)-different from no. 6
Working on aosp and cm9
Instrustions can be found in the link
8. Add Power Button to status bar (by Adi_ai****eru)
Needs testers
Instrustions can be found in the link
9. Aosp camera (2 versions)
Instructions can be found in these threads
-Working on all cm10 roms
Adi_ai****eru's version
-Tested only the ICS version
TheUnkn0wn's version
10. Tablet UI patch (by Adi_ai****eru)
- Working on CM10 roms
Instructions:
-Flash the mod through recovery
-Reboot your device
-Change your density to 160dpi in build'prop
-Reboot your device again
11. ACID Audio Engine (by Knight47)
Working on all CM9 and CM10 roms
Instructions can be found in the link
12. VMLagTuner (by LENAROX)
Working on every single rom
Instructions can be found in the link
13. SGS3 Style Notification Panel (by chinmay_7d)
Working on CM10 roms
Instructions:
1. Enter Recovery
2. Choose Zip from sdcard
3. Flash Zip
4. Reboot
14. Disable CPU Rendering (by honeyx)
Needs testers (should work on GB and ICS)
1. Enter Recovery
2. Choose Zip from sdcard
3. Flash Zip
4. Reboot
15. Dual Panel/PhabletUI Style Settings (by Adi_Ai****eru)
Needs testers (should work on cm9 and cm10)
Instructions can be found in the link
16. Mobile Bravia Engine 2 (by dewadg)
Working on android 4.0+
17. Sony Xperia Pack (by auras76)
For android 4.1.2 (may work on 4.0.4 so needs testers)
Instructions:
-Download Sony Xperia Pack and build.prop.zip
-Use root explorer or similar apps and go to system/ build.prop
-Add the lines from the provided build.prop at the end of your own system build.prop
-Flash the Sony Xperia Pack through recovery mode
-Reboot & Enjoy!
Credits goes to those developers who made those mods.
Note: Do this at your own risk. I am not reponsible for any damage to your phone but may be reponsible for bootloops.
Please report any mods in the list that are not working.
If you have mods that you want to share, feel free to comment here and I will add to the list.
Reserved for future mods to be shared
This can become a nice collection, but I suggest you format your post a bit better then you currently have
Mod Title
Description here... Description here... Description here...
Download/Link: http://.....
Mod Title
Description here... Description here... Description here...
Download/Link: http://.....
Mod Title
Description here... Description here... Description here...
Download/Link: http://.....
for example
broodplank1337 said:
This can become a nice collection, but I suggest you format your post a bit better then you currently have
Mod Title
Description here... Description here... Description here...
Download/Link: http://.....
Mod Title
Description here... Description here... Description here...
Download/Link: http://.....
Mod Title
Description here... Description here... Description here...
Download/Link: http://.....
for example
Click to expand...
Click to collapse
Thanks for the tip. I'm currently typing on my phone using 4.2 keyboard so it may take awhile
Nice to see always something new! :laugh:
I am not sure if Dim Behind Expanded Panel is going to work on PA2.5.2
I will try ASAP and let you know
You can't flash first mod. It'a an apk..
Juhan Jufri said:
4. Navigation Bar mod (by sgoo)
Works on all cm9 and cm10 roms
Add qemu.hw.mainkeys=0 to the end of your build prop and reboot
Credits goes to those developers who made those mods. DO THIS AT YOUR OWN RISK.
If you have mods that you want to share, feel free to comment here and I will add to the list.
Click to expand...
Click to collapse
Thats exactly what i posted here a while ago. Perhaps a bit better because of the guide
Link:http://forum.xda-developers.com/showthread.php?t=1832638
mrjraider said:
Thats exactly what i posted here a while ago. Perhaps a bit better because of the guide
Link:http://forum.xda-developers.com/showthread.php?t=1832638
Click to expand...
Click to collapse
Sorry man. I typed the wrong name. I'll edit right away
cezaralboiu said:
You can't flash first mod. It'a an apk..
Click to expand...
Click to collapse
Thanks for pointing out. I'm a bit nervous that's why I was rushing
Maybe you can add this to the OP. I saw someone asking for it in cyanogenmod 10 thread, and someone confirmed it working
http://forum.xda-developers.com/showthread.php?t=1921938
Edit! Sorry didn't see it all ready was in OP
Sent from my GT-I9001 using xda app-developers app
Btw. I haven't tried it Yet, but I predict that when I install the kill all mod, the first mod in the list will go away, right?
So is there a way to keep them both?
Sent from my GT-I9001 using xda app-developers app
rickvrolings said:
Btw. I haven't tried it Yet, but I predict that when I install the kill all mod, the first mod in the list will go away, right?
So is there a way to keep them both?
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
Yes if you mod both of them to one. (every apk is a zip, unzip, put the requested files together, zip, rename to apk, finish)
sent from my GameBoy Color
------------------------------
working on:
Project Stock (4.0.4)
Updated with 2 mods by Adi_ai****eru. I need testers to test mod no.6
updated and added 4 mods
Updated and added 2 new mods. Tablet Ui patch and the all awaited ACID audio engine. And yes acid audio is working fine. Flashed it over smoothieJB and there is no cracking sound in bass boost even though I set it to high in dsp manager
Are these mods for our s plus...?
Cause i tried "kill all mod" and i said installation aborted...
Sent from my GT-I9001
sdk_8816 said:
Are these mods for our s plus...?
Cause i tried "kill all mod" and i said installation aborted...
Sent from my GT-I9001
Click to expand...
Click to collapse
Yes. Please follow instructions in the first part
Reloaded theme for JB works perfectly fine. Its awesome!!!
Sent from my GT-I9001 using xda app-developers app
Updated and added 5 new mods into the first post. Most of them are done by Adi_ai****eru. Merry Christmas everyone (P.S i dont celebrate Christmas )
Thank you so much for your big effort !
No need to search for what works on our phones anymore because this collection provides a great trouble....
Thank you :thumbup:
Sorry for my English
Sent from my GT-I9001 using xda app-developers app
I am not a expert but I put in a little effort for the all the users of I9003 who wish to run DDMF1. Its smooth, Its working superbly.
So thought of Deodexing the Rom and Trying to put some customisations.
This Thread consist of :
1. Deodexed DDMF1 Rom for I9003.
2. Removing unwanted system apps.
3. Adding 15 toggles.
4. Adding 1% Batter Mod.
5. Adding Arabic Language Support.
6. Adding SwapSD Mod.
7. Added Boost Based both on Bam and Verrut kernel - Try out the Recomended link and post results.
For best results follow the procedure given below.
Link Given at the end of post for download.
Flashing Procedure :
1. Flash XXKPE with PIT using Odin.
2. Flash DDMF1 only PDA using Odin.
3. Flash CWM selecting in PDA using Odin.
4. Wipe Data/Factory Reset.
5. Now put the Deodexed Rom in sd-card and flash using CWM.
6. Now Reboot your device.
Congrats, Now you have deodexed rom on your I9003.
For removing unwanted system apps.
Link Given at the end of post for download.
Procedure :
1. Reboot handset to Recovery.
2. Flash the zip file using recovery.
3. Reboot.
For adding 15 Toggles.
Link Given at the end of post for download.
Procedure :
1. Reboot handset to Recovery.
2. Flash the zip file using recovery.
3. Reboot.
For adding 1% Battery Mod.
Link Given at the end of post for download.
Procedure :
1. Reboot handset to Recovery.
2. Flash the zip file using recovery.
3. Reboot.
Arabic Language Patch for Deodexed DDMF1 ( Thanks to blacklist3d )
Link Given at the end of post for download.
Procedure :
1. Reboot handset to Recovery.
2. Flash the zip file using recovery.
3. Reboot.
For adding SwapSD Mod. ( Thanks to LoLaTiOn & blacklist3d )
blacklist3d - Your moded vod.fstab was used to make the SwapSd by LoLaTiOn.
Link Given at the end of post for download.
Procedure :
1. Reboot handset to Recovery.
2. Flash the zip file using recovery.
3. Reboot.
Here Comes Boost for DDMF1 ( Thanks to LoLaTiOn who made the flashable zip for DDMF1)
Added BAM 14 Tweak Zipalign and Boost TCP. - Was using it for the entire day but the battery life was not good.
Original Thread : Bam Custom Kernel
New Boost : vurrut v9.1 ( Thanks to LoLaTiOn who made the flashable zip for DDMF1)
Added Many Tweaks for 3g, Power Save, Media, System and many more.
This is stable and working perfectly.
Link Given at the end of post for download.
Procedure :
1. Reboot handset to Recovery.
2. Flash the zip file using recovery.
3. Reboot.
Note : Link to all Download are enclosed here :
Deodexed DDMF1 Rom Download Link
Delete Unwanted System App Download Link
Add 15 toggles Download Link
Add 1% Battery Mod Download Link
Add Arabic Language
Add SwapSD
Add Boost
Add Verrut Boost with my Tweaks- Recomended
Add Verrut Boost original by LoLaTioN
It's a request if anyone can make this more better then please help me out.
Looking ahead towards everyone continued support.
Regards,
rahul_rocks3
Note : Use at your own risk I am not responsible for any damage caused to your device.
Using DDMF1??? When super stable alpha 6 is already there??
vishal24387 said:
Using DDMF1??? When super stable alpha 6 is already there??
Click to expand...
Click to collapse
DDMF1 all work. Any problem. The best rom.
Thanks rahul_rocks3
Is these room include Arabic language ..
Thanks for your work...
Sent from my Nexus 4 using xda app-developers app
rahul_rocks3 said:
[
For adding 15 Toggles.
Procedure :
1. Reboot handset to Recovery.
2. Flash the zip file using recovery.
3. Reboot.
Click to expand...
Click to collapse
error - proceso com.android.systemui
EDIT : now work !!!!
rahul_rocks3 said:
I am not a expert but I put in a little effort for the all the users of I9003 who wish to run DDMF1. Its smooth, Its working superbly.
So thought of Deodexing the Rom and Trying to put some customisations.
This Thread consist of :
1. Deodexed DDMF1 Rom for I9003.
2. Removing unwanted system apps.
3. Adding 15 toggles.
4. Adding 1% Batter Mod.
Regards,
rahul_rocks3[/B]
Click to expand...
Click to collapse
thanks buddy...u made my wish come true....ha ha ha....:good::good::laugh::laugh:
vishal24387 said:
Using DDMF1??? When super stable alpha 6 is already there??
Click to expand...
Click to collapse
can't say supper stable...until hw decoder fully works for video...(720p recording and play back)
there r still bugs..
*as unresponsiveness of touchscreen
*backlight issue
*when wifi in on bluetooth works slower
*third party camera crashes
*low frame rate recording and playback
......etc....
when it will be stable we all will definitely leave GB roms...
Thanks Rahul!
Was waiting for this.
hider7 said:
Is these room include Arabic language ..
Thanks for your work...
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
check out this thread for adding arabic language
http://forum.xda-developers.com/showthread.php?t=1292956
Thanks rahul_rocks3 for Deodexing the Rom :good:
Arabic language patch for Deodexed DDMF1, Use Attached File.
Procedure :
1. Reboot handset to Recovery.
2. Flash the zip file.
3. Reboot.
i dont know very much on GB but i think to port new Lockscreen from other patch from DDLF2 ,,
and add Tweaks on build.prop ..
abderrezak said:
i dont know very much on GB but i think to port new Lockscreen from other patch from DDLF2 ,,
and add Tweaks on build.prop ..
Click to expand...
Click to collapse
can you do that for us brother...it will be very helpful
blacklist3d said:
Thanks rahul_rocks3 for Deodexing the Rom :good:
Arabic language patch for Deodexed DDMF1, Use Attached File.
Procedure :
1. Reboot handset to Recovery.
2. Flash the zip file.
3. Reboot.
Click to expand...
Click to collapse
I have added more options to DDMF1 like reboot, recovery, download, swipe notification, arabic language will upload all today at night
Thanks Brother!
Keep the good work going for all the stock users like us.
If possible can you do the low brightness mod too.
It saves a lot of battery.
SikanderKeynes said:
Thanks Brother!
Keep the good work going for all the stock users like us.
If possible can you do the low brightness mod too.
It saves a lot of battery.
Click to expand...
Click to collapse
yup trying to get that too....hope will be done by today....
SikanderKeynes said:
Thanks Brother!
Keep the good work going for all the stock users like us.
If possible can you do the low brightness mod too.
It saves a lot of battery.
Click to expand...
Click to collapse
Bro please flash this swipe notification mod and revert back with the results.
http://www.mediafire.com/?qatbvjzoy7wru56
Thanks to : hansip87 for great guide.
Which kernel should be used with DDMF1? is working some kernel with 1.35 overclock? or only the BCK kernel?
And is there some flashable zip for swap sd or shud be use the vold.stab?
redflash52 said:
Which kernel should be used with DDMF1? is working some kernel with 1.35 overclock? or only the BCK kernel?
And is there some flashable zip for swap sd or shud be use the vold.stab?
Click to expand...
Click to collapse
right now i m using the stock kernel only just did some customisation nothing else...and have not worked on swap sd...Lolation said in some thread that he will be working on it
redflash52 said:
Which kernel should be used with DDMF1? is working some kernel with 1.35 overclock? or only the BCK kernel?
And is there some flashable zip for swap sd or shud be use the vold.stab?
Click to expand...
Click to collapse
if want to use OC 1.35 Ghz..u can use this kernel
vurrut kernel v9
http://d-h.st/yZw
and then use "No Frill CPU" app to control frequencies...
@rahul_rocks3
Good Work Bro...
Here u go guys, Swap Sd working, test & report back :fingers-crossed:
original & modified files attached.