Related
UPDATE: Apparently it is only possible to change the CID with S-ON if your current CID is SuperCID.
*issue closed*
I had used Revolutionary to de-brand my phone. First S-OFF, then SuperCID, then a stock unbranded ROM, then back to S-ON.
I wasn't getting the OTA to 2.3.4 here in The Netherlands, so I changed my CID to HTC__E11, which is the CID for an unbranded Sensation in The Netherlands. Lo and behold, I got the OTA immediately.
Interesting to note, I was able to change the CID using "fastboot oem writecid HTC__E11" with S-ON. Someone else was able to do exactly the same thing so it's confirmed to work.
Now that I have upgraded to 2.3.4 and have my CID set to HTC__E11, this no longer works for me. However I'm wondering if it *does* work for people still on 2.3.3, or if it only worked for me because I was already SuperCID. I wonder if others who are still on 2.3.3 are able to use "fastboot oem writecid 11111111" with S-ON (i.e. without using Revolutionary).
So, using adb tools on a stock ROM:
NOTE: If you test this you do so at your own risk.
0. download and unzip adb tools to a folder. make sure HTC Sync is not running (uninstall, or just exit/kill the application).
1. open command prompt and "cd" your adb folder
2. ensure your phone is switched on (regular home screen) and connect it by USB in charging mode (ensure usb debugging is on settings).
3. enter the command "adb devices". This is to confirm your phone is connected. (It should come back with list of devices attached and your serial number)
4. enter the command "adb reboot-bootloader". (nothing further required device WILL reboot in bootloader)
5. enter the command "fastboot oem writecid 11111111"
6. enter the command "fastboot reboot-bootloader (Wait for it to reboot the bootloader)
7. enter the command "fastboot getvar cid" [it should confirm your CID is 11111111]
8. enter the command "fastboot reboot"
9. you should now be able to flash any stock ROM you like.
NOTE: Please DO NOT change your CID to HTC__E11 unless you are in The Netherlands. HTC__E11 is the CID for an unbranded Sensation in The Netherlands. If you are in a different country, check for the appropriate CID here: http://forum.xda-developers.com/showthread.php?t=1195475&page=3.
I've already de-branded my phone, but I wonder if others are able to using "fastboot oem writecid 11111111" without using Revolutionary.
Click to expand...
Click to collapse
Yes, I have. In fact I believe that method is in one of the tutorials here.
Here is a link that describes it: http://forum.xda-developers.com/showthread.php?t=1192300
kmdub said:
Yes, I have. In fact I believe that method is in one of the tutorials here.
Here is a link that describes it: http://forum.xda-developers.com/showthread.php?t=1192300
Click to expand...
Click to collapse
No, that tutorial uses Revolutionary first to go from S-ON to S-OFF before changing the CID. I was able to change my CID with S-ON.
so I'm changing my cid to 11111111?
not HTC__E11?
zahashingo123 said:
so I'm changing my cid to 11111111?
not HTC__E11?
Click to expand...
Click to collapse
11111111 is the SuperCID. HTC__E11 is the CID for unbranded Sensations in The Netherlands. If you don't use the SuperCID, you may want to refer to http://forum.xda-developers.com/showthread.php?t=1195475&page=3 for a list of CIDs.
I changed to the SuperCID using Revolutionary to first get S-OFF. Then I set S-ON. But even with S-ON, I was still able to change my CID (I changed it to HTC__E11 in order to receive the OTA to 2.3.4.).
So what I'm wondering is if people with 2.3.3 and S-ON are able to change their CID to the SuperCID 11111111, without first using Revolutionary to change to S-OFF.
Ok, I must have misunderstood your question. It seems as if you have clarified your question since your original post. I just thought you were asking if one could write the CID without Revolutionary. My bad. FYI, I have not tried what you are asking.
I changed to the SuperCID using Revolutionary to first get S-OFF. Then I set S-ON.
Click to expand...
Click to collapse
A statement like this, though, I don't really understand. Two questions come to mind: 1) How did you set S-ON? and 2) Were you able to confirm that you wrote a new CID with S-ON, or did you just not get an error message?
kmdub said:
Ok, I must have misunderstood your question. It seems as if you have clarified your question since your original post. I just thought you were asking if one could write the CID without Revolutionary. My bad. FYI, I have not tried what you are asking.
A statement like this, though, I don't really understand. Two questions come to mind: 1) How did you set S-ON? and 2) Were you able to confirm that you wrote a new CID with S-ON, or did you just not get an error message?
Click to expand...
Click to collapse
I set S-ON using the instructions on how to set S-ON here http://forum.xda-developers.com/showthread.php?t=1192300 and I confirmed it during reboot, the text "S-ON" was back on the boot screen.
I wrote the new CID with S-ON, then confirmed it by rebooting and running the command "fastboot getvar cid", which gave me the phone's CID, which indeed was the new CID I'd written. In addition, with the new CID (unbranded Dutch, instead of SuperCID), I immediately got the OTA to 2.3.4.
Someone need to test this with a stock phone!
Or try to set secureflag to 1 maybe its not really changed ...
xtcislove said:
Someone need to test this with a stock phone!
Click to expand...
Click to collapse
That's exactly what I'm asking people to do.
xtcislove said:
Or try to set secureflag to 1 maybe its not really changed ...
Click to expand...
Click to collapse
What's your problem, can't you read? I wrote already, the phone reports "S-ON" in the boot screen, and after a reboot, it still reports the new CID, and after setting the new CID, I got the Netherlands OTA immediately.
I tried it with stock s-on phone and it doesn't work.
Code:
C:\AndroidSDK\tools>fastboot oem writecid 11111111
...
(bootloader) pyramid_init_sd, SD card already power on
(bootloader) sdcc_init_memory_device done
(bootloader) [FAT_ERROR] fat_open_file: can not find SMART_IO.CRD
(bootloader) [JAVACARD_ERR] SMART_IO.CRD cann't find
OKAY [ 0.172s]
finished. total time: 0.172s
It still reports same cid.
supendal said:
I tried it with stock s-on phone and it doesn't work.
It still reports same cid.
Click to expand...
Click to collapse
Thanks for testing this - just to confirm, you tested with 2.3.3 and not 2.3.4, right?
If so, then it seems to imply that you can change the CID even with S-ON but only if you currently have SuperCID.
Then I have no idea. I would not think one could write a new CID with S-ON, regardless of the ROM. However, you have tried it and claim it works, so someone with more knowledge will have to explain why...lol
I notice in the tutorial it says "secureflag 3," which at least gives you S-ON displayed, and perhaps does set the security back on. I wonder what 0,1,and 2 do, though. Is it 0,1,2, or 3 on stock phone with S-ON?
sowen222 said:
Thanks for testing this - just to confirm, you tested with 2.3.3 and not 2.3.4, right?
Click to expand...
Click to collapse
Yes, tested on stock s-on phone and stock 2.3.3 rom. 2.3.4 Ota update is still not available here.
well i do also have s-on and managed to change cid to HTC__E11 with adb and also like the OP can't seem to change it back to what it was (stock sensation with 1.50...rom) does the cid mathers in terms of warranty and ota updates??? (i'm in the netherlands)
regards
edit:well OTA updates do work on my side but still no luck changing the CID again.
nobody here that can decifer this one??
I have a sendation xe with hboot 1.18 and s-on.
I used the commands to change CID from HTC__038 to HTC__001.
I still don't receive the OTA update on my phone though.
The phone was bought from Hong Kong but from using the CID Getter app it shows CID at the top as HTC__001 now but when you scroll through the data there are still reference to it being an indian phone.
I am looking to change it to stock Euro gingerbread with CID 001 so that I can receive the OTA ICS update.
I can't use revolutionary to change to S-OFF as always fails. I can't install the RUU for euro GB as it gives an error when I try to run it.
Not having any joy asking people for help so far either.
Hi, I am trying to S-ON my HTC Sensation again.
I have run a stock ruu.exe, and changed the hboot to 1.27.0000
The device is unrooted by that if I am right.
If I follow step 5 from this thread ( http://forum.xda-developers.com/showthread.php?t=1192300 ) via the fastboot oem writesecureflag 3 way, when the bootloader reloads, it stays S-OFF
I have tried a lot, and I hope somebody knows whats wrong.
C:\android-sdk-windows\platform-tools>fastboot oem writesecureflag 3
... OKAY
C:\android-sdk-windows\platform-tools>fastboot reboot-bootloader
rebooting into bootloader... OKAY
It says Locked
PYRAMID PVT SHIP S-OFF RL
I have now tried another RUU.exe and tried another way by getting rom.zip and making this PG58IMG.zip, but it still won't S-ON
HBOOT- 1.17.0008
RADIO- 10.11.9007.15_M
eMMC-boot
it doesn't say LOCKED anymore <- is that a problem?
please help me!!! anyone..
rickolie said:
Hi, I am trying to S-ON my HTC Sensation again.
I have run a stock ruu.exe, and changed the hboot to 1.27.0000
The device is unrooted by that if I am right.
If I follow step 5 from this thread ( http://forum.xda-developers.com/showthread.php?t=1192300 ) via the fastboot oem writesecureflag 3 way, when the bootloader reloads, it stays S-OFF
I have tried a lot, and I hope somebody knows whats wrong.
C:\android-sdk-windows\platform-tools>fastboot oem writesecureflag 3
... OKAY
C:\android-sdk-windows\platform-tools>fastboot reboot-bootloader
rebooting into bootloader... OKAY
It says Locked
PYRAMID PVT SHIP S-OFF RL
I have now tried another RUU.exe and tried another way by getting rom.zip and making this PG58IMG.zip, but it still won't S-ON
HBOOT- 1.17.0008
RADIO- 10.11.9007.15_M
eMMC-boot
it doesn't say LOCKED anymore <- is that a problem?
please help me!!! anyone..
Click to expand...
Click to collapse
Check the cid.. If it is supercid then SON command might not work
So change back to original cid of the phone
Then try SON
Another thing is.. The locked/unlocked status is available from 1.18 hboot only so it normal that 1.17 hboot doesn't show anything
Sent from my HTC Sensation using xda premium
ganeshp said:
Check the cid.. If it is supercid then SON command might not work
So change back to original cid of the phone
Then try SON
Another thing is.. The locked/unlocked status is available from 1.18 hboot only so it normal that 1.17 hboot doesn't show anything
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
Tnx for replying
I am trying to get the stock cid, I have found my MID is PG5813000 (Fastboot getvar MID), and that means that my cid is VODAPE17?
I have vodafone and I am from the netherlands so I think it should be that one.
When I use fastboot oem writecid VODAPE17 this comes up:
...
(bootloader) Start Verify: -1
(bootloader) erase sector 65504 ~ 65535 (32)
OKAY [ 1.559s ]
finished total time: 1.564s
fastboot getvar cid
cid: 11111111
finished. total time: 0.019s
I have also installed the app CID getter, it said I had HTC__E11, when i tried to write it I got the same error
I can't find any solutions, help again pls
rickolie said:
Tnx for replying
I am trying to get the stock cid, I have found my MID is PG5813000 (Fastboot getvar MID), and that means that my cid is VODAPE17?
I have vodafone and I am from the netherlands so I think it should be that one.
When I use fastboot oem writecid VODAPE17 this comes up:
...
(bootloader) Start Verify: -1
(bootloader) erase sector 65504 ~ 65535 (32)
OKAY [ 1.559s ]
finished total time: 1.564s
fastboot getvar cid
cid: 11111111
finished. total time: 0.019s
I have also installed the app CID getter, it said I had HTC__E11, when i tried to write it I got the same error
I can't find any solutions, help again pls
Click to expand...
Click to collapse
is the phone locked to vodafone netherlands ? then the cid you mentioned is fine
but the RUU cid is saying its HTC_E11 so try that ...
also after changing the cid
do a fastboot reboot-bootloader then verify the cid ..it should change
EDIT: earlier cid change worked fine (check it now it will change )..btw make sure that RUU cid and the cid you are giving is fine and proper one ..then only do SON
ganeshp said:
is the phone locked to vodafone netherlands ? then the cid you mentioned is fine
but the RUU cid is saying its HTC_E11 so try that ...
also after changing the cid
do a fastboot reboot-bootloader then verify the cid ..it should change
EDIT: earlier cid change worked fine (check it now it will change )..btw make sure that RUU cid and the cid you are giving is fine and proper one ..then only do SON
Click to expand...
Click to collapse
That doesn't work like I allready said, after trying numorous times it still won't doesn't change.
or is there a code to verify a cid? because I can't find any.
rickolie said:
That doesn't work like I allready said, after trying numorous times it still won't doesn't change.
or is there a code to verify a cid? because I can't find any.
Click to expand...
Click to collapse
fastboot oem readcid
and
fastboot getvar cid
should give you your cid
try
fastboot oem writecid HTC__E11
then
fastboot reboot-bootloader
then
faatboot getvar cid
ganeshp said:
fastboot oem readcid
and
fastboot getvar cid
should give you your cid
try
fastboot oem writecid HTC__E11
then
fastboot reboot-bootloader
then
faatboot getvar cid
Click to expand...
Click to collapse
That is what i am doing, won't work
look at the image I added
rickolie said:
That is what i am doing, won't work
look at the image I added
Click to expand...
Click to collapse
Flash a gb ruu and try cid change again... Looks like mmcblk6,7 partitions got corrupted
Edit: wait are you on 1.17 hboot now?
Then go back to the ics ruu and change the cid
Sent from my HTC Sensation using xda premium
ganeshp said:
Flash a gb ruu and try cid change again... Looks like mmcblk6,7 partitions got corrupted
Edit: wait are you on 1.17 hboot now?
Then go back to the ics ruu and change the cid
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
Done that, now on hboot 1.27.0000 again, but the same error as in the image.
after I writecid HTC__E11 , and than readcid, I get HTC__E11, but when I reboot and than readcid again it is changed to 11111111
ganeshp said:
Flash a gb ruu and try cid change again... Looks like mmcblk6,7 partitions got corrupted
Edit: wait are you on 1.17 hboot now?
Then go back to the ics ruu and change the cid
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
What should I do now?, please help me,
I'm trying this for weeks now, and would be very happy if it worked
rickolie said:
What should I do now?, please help me,
I'm trying this for weeks now, and would be very happy if it worked
Click to expand...
Click to collapse
there is a work around ..but for that you need to root your device again ..install busybox (ginger bread or ics both will do )
then give me the outputs of these terminal commands
(if using terminal emulator app from phone )inside shell:
su
strings -n 8 /dev/block/mmcblk0p4
and
strings -n 8 /dev/block/mmcblk0p5
also verify what the CID in this output
strings -n 8 /dev/block/mmcblk0p6
terminal outputs
ganeshp said:
there is a work around ..but for that you need to root your device again ..install busybox (ginger bread or ics both will do )
then give me the outputs of these terminal commands
(if using terminal emulator app from phone )inside shell:
su
strings -n 8 /dev/block/mmcblk0p4
and
strings -n 8 /dev/block/mmcblk0p5
also verify what the CID in this output
strings -n 8 /dev/block/mmcblk0p6
Click to expand...
Click to collapse
I have rooted again, and installed busybox, and installed the terminal app.
When I type the codes excactly like you say, I get no output? can you show me how to get output?, I just hit enter:silly:
rickolie said:
I have rooted again, and installed busybox, and installed the terminal app.
When I type the codes excactly like you say, I get no output? can you show me how to get output?, I just hit enter:silly:
Click to expand...
Click to collapse
That's all I wanted.. It supposed to give you certain output... It should technically give you IMEI and cid as output..
Can you verify your Imei it might have changed by now
Sent from my HTC Sensation using xda premium
ganeshp said:
That's all I wanted.. It supposed to give you certain output... It should technically give you IMEI and cid as output..
Can you verify your Imei it might have changed by now
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
Here is my IMEI: 355195000000017
just got it by dialing *#06#
rickolie said:
Here is my IMEI: 355195000000017
just got it by dialing *#06#
Click to expand...
Click to collapse
Now I'm 100% sure that... The Imei has changed.. Verify the Imei with the one present on the original box.. I can help you in rectifying it.. But I need the actual Imei first
Sent from my HTC Sensation using xda premium
ganeshp said:
Now I'm 100% sure that... The Imei has changed.. Verify the Imei with the one present on the original box.. I can help you in rectifying it.. But I need the actual Imei first
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
The one on the box says: 205442641317453
rickolie said:
The one on the box says: 3*************************7
Click to expand...
Click to collapse
Edit the Imei here.. And PM me the actual Imei and cid you want to change again again.. I'm out of station now... So 48 hrs from now i will send you detailed instructions as to what to do
Sent from my HTC Sensation using xda premium
back?
ganeshp said:
Edit the Imei here.. And PM me the actual Imei and cid you want to change again again.. I'm out of station now... So 48 hrs from now i will send you detailed instructions as to what to do
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
I have send you my IMIE, can you send me the instructions?
rickolie said:
I have send you my IMIE, can you send me the instructions?
Click to expand...
Click to collapse
Ok ill send you a PM in an hour
Sent from my HTC Sensation using xda premium
rickolie said:
I have send you my IMIE, can you send me the instructions?
Click to expand...
Click to collapse
Done check your PM
Hi all,
I feel like I have looked everywhere and cannot find an answer for this. I have an at&t one x that is rooted and unlocked with a custom rom, however I somehow changed my cid from supercid 11111111 to htc__001. Is it possible to get supercid 11111111 back or at least wsc__001 so I can run the correct ruu on it.
Thank you in advance for any ideas or help
Just do s off then it will bypass cid... But I think you can do fastboot oem write cid 11111111( don't know how many ones there are)
ziolko said:
Hi all,
I feel like I have looked everywhere and cannot find an answer for this. I have an at&t one x that is rooted and unlocked with a custom rom, however I somehow changed my cid from supercid 11111111 to htc__001. Is it possible to get supercid 11111111 back or at least wsc__001 so I can run the correct ruu on it.
Thank you in advance for any ideas or help
Click to expand...
Click to collapse
fastboot eom writecid "htc__001" or whatever you want it to be minus quotations while in fastboot.
---------- Post added at 03:30 PM ---------- Previous post was at 03:29 PM ----------
a box of kittens said:
Just do s off then it will bypass cid... But I think you can do fastboot oem write cid 11111111( don't know how many ones there are)
Click to expand...
Click to collapse
there's 8 characters in the CID
You can change the CID the old "manual" method: http://forum.xda-developers.com/showthread.php?t=1671396
Or if you do S-off, you can just change the CID with a fastboot command.
Sounds like you were one of the folks that changed to the quad core CID so you can flash a ROM from that phone. Scary.
redpoint73 said:
You can change the CID the old "manual" method: http://forum.xda-developers.com/showthread.php?t=1671396
Or if you do S-off, you can just change the CID with a fastboot command.
Sounds like you were one of the folks that changed to the quad core CID so you can flash a ROM from that phone. Scary.
Click to expand...
Click to collapse
I will try the manual fix, thank you!
I did not read everything I should have in the beginning. I was trying to run a ruu back to stock and did not know I could have done that with supercid ( which I had at the time) and thought I had to change the cid back to original and mistakenly thought HTC__001 was correct. After I realized WSC__001 was actually the correct original cid and now i can't change back in fastboot without errors. I got to comfortable and got ahead of myself.......
CWS__001
Sent from my HTC One X using xda app-developers app
redpoint73 said:
You can change the CID the old "manual" method: http://forum.xda-developers.com/showthread.php?t=1671396
Or if you do S-off, you can just change the CID with a fastboot command.
Sounds like you were one of the folks that changed to the quad core CID so you can flash a ROM from that phone. Scary.
Click to expand...
Click to collapse
You don't need S-off to use the fastboot command to change it from what I understand you just need to have Super CID.
exad said:
You don't need S-off to use the fastboot command to change it from what I understand you just need to have Super CID.
Click to expand...
Click to collapse
Right but without s-off, you can only do it once, away from SuperCID. After that, you're stuck.
OP has neither s-off nor SuperCID, which means he needs the exploit.
Back at SuperCID 11111111, thank you everyone.
ziolko said:
Back at SuperCID 11111111, thank you everyone.
Click to expand...
Click to collapse
Go s-off before you do anything else. You'll thank me later.
iElvis said:
Go s-off before you do anything else. You'll thank me later.
Click to expand...
Click to collapse
S-OFF achieved , now how do I get Jelly bean or another recommended rom?
ziolko said:
S-OFF achieved , now how do I get Jelly bean or another recommended rom?
Click to expand...
Click to collapse
Just load and flash. Once you're s-off, you can flash whatever you want.
iElvis said:
Just load and flash. Once you're s-off, you can flash whatever you want.
Click to expand...
Click to collapse
Well.. anything intended for your device!!!! -_- You're gonna brick noobs talking like that lol
Went with ViperXL 3.2.6 and love it! Thanks to all who helped!
HELP ME!
Its gotta go back tomorrow, Ive searched for hours and I cant seem to find an easy guide to unroot my AT&T One X!
This is beyond frustrating!
Raadius said:
HELP ME!
Its gotta go back tomorrow, Ive searched for hours and I cant seem to find an easy guide to unroot my AT&T One X!
This is beyond frustrating!
Click to expand...
Click to collapse
It's not the easiest thing to do.. What state is your phone in now? hboot? supercid? S-ON? S-OFF?
exad said:
It's not the easiest thing to do.. What state is your phone in now? hboot? supercid? S-ON? S-OFF?
Click to expand...
Click to collapse
HBOOT = 1.09
S-ON
No SuperCID, I used SpoofCID.
Spoof cid is the same thing as SuperCID, get your cid by using fastboot command:
fastboot oem readcid
Sent from my Evita
Raadius said:
HBOOT = 1.09
S-ON
No SuperCID, I used SpoofCID.
Click to expand...
Click to collapse
I see.
First you will need to S-OFF http://forum.xda-developers.com/showthread.php?t=2155071
I don't know if spoofCID will work, you may need to supercid first. it is quite easy with your hboot.
Code:
adb shell
su
echo -ne "11111111" | dd of=/dev/block/mmcblk0p5 bs=1 seek=20
Then once you are S-OFF, Run an RUU for your carrier. With S-Off, it won't matter what software version. It will get you on stock software and remove Tampered text
Rewrite your CID
Code:
fastboot oem writecid CWS__001
Then you can use Regawmod and spoof your unlocked to Locked http://forum.xda-developers.com/showthread.php?t=2156368
You can also spoof your S-off to S-on, or claim your phone came with S-off if they ask or actually set it back to S-on with:
Code:
fastboot oem writesercureflag 3
Good luck.
timmaaa said:
Spoof cid is the same thing as SuperCID, get your cid by using fastboot command:
fastboot oem readcid
Sent from my Evita
Click to expand...
Click to collapse
CID is CWS__001
Raadius said:
CID is CWS__001
Click to expand...
Click to collapse
I wrote the steps above. You should be good with all that.
Raadius said:
CID is CWS__001
Click to expand...
Click to collapse
I stand corrected, I used spoof cid when I rooted and it gave me SuperCID.
Sent from my Evita
exad said:
It's not the easiest thing to do.. What state is your phone in now? hboot? supercid? S-ON? S-OFF?
Click to expand...
Click to collapse
Sent from my HTC Sensation using xda premium
Where can I find the stock recovery for my AT&T One X?
Raadius said:
Where can I find the stock recovery for my AT&T One X?
Click to expand...
Click to collapse
It will install with the RUU. with S-off you do not need to flash stock recovery or relock or anything. Just run the RUU exe file.
Sorry, I was reading Option 2 from this link
http://forum.xda-developers.com/showthread.php?t=1859714
and watching this video,
http://www.youtube.com/watch?v=SZuAjz4PIjU
Raadius said:
Sorry, I was reading Option 2 from this link
http://forum.xda-developers.com/showthread.php?t=1859714
and watching this video,
http://www.youtube.com/watch?v=SZuAjz4PIjU
Click to expand...
Click to collapse
Don't. that tut is for endeavor.
Videos are not all that reliable either. Trust my directions, you'll be fine.
Terminal stuff gets me confused, sorry to say. I read what your saying, but Im lost already. That's why I went to YouTube, better at viewing it and doing it than reading it. Im better at visual, sorry.
Why cant this be done with S-On?
timmaaa said:
I stand corrected, I used spoof cid when I rooted and it gave me SuperCID.
Sent from my Evita
Click to expand...
Click to collapse
So what does that mean than for me?
Raadius said:
So what does that mean than for me?
Click to expand...
Click to collapse
Not much. Just follow Exad's instructions and you'll be golden.
Sent from my Evita
timmaaa said:
Not much. Just follow Exad's instructions and you'll be golden.
Sent from my Evita
Click to expand...
Click to collapse
Do I have to be S OFF though? You said SpoofCID is the same as SueprCID, so can I skip the S-OFF step and run the RUU?
How do I do all this adb shell terminal stuff? Im new to this...
You need to be s-off or you'll brick. The command stuff is pretty simple, do you have adb/fastboot installed on your pc?
Sent from my Evita
The only thing you need to know is for the fastboot commands your phone needs to be in bootloader and for adb commands your phone needs to be booted into android. Then all you have to do is copy paste the commands into your command prompt.
Just shift right click in the folder where you have fastboot and adb and select "open command prompt here" to get a command line Window open.
Sent from my One X using xda app-developers app
Is it possible to do a JB RUU after i just superCID and S-OFF? Because i wanna go back to stock.
Yes,but don't use the OTA RUU or you will brick your phone
yooouuri said:
Is it possible to do a JB RUU after i just superCID and S-OFF? Because i wanna go back to stock.
Click to expand...
Click to collapse
You can use any ruu while s-OFF, just simply plug phone to computer and run ruu. No need to relock bootloader.
For the supercid, it is recommended to change it back to original with fastboot command.
Fastboot oem write cid xxxxxxxx.
There has been a few bricks takin Jb ota while still supercid.
Sent from my HTC One S
tominozh said:
You can use any ruu while s-OFF, just simply plug phone to computer and run ruu. No need to relock bootloader.
For the supercid, it is recommended to change it back to original with fastboot command.
Fastboot oem write cid xxxxxxxx.
There has been a few bricks takin Jb ota while still supercid.
Sent from my HTC One S
Click to expand...
Click to collapse
Uwe303 said:
Yes,but don't use the OTA RUU or you will brick your phone
Click to expand...
Click to collapse
Thanks for your fast response, how do i know my original CID?
Im going to flash
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
So do i need to change my CID?
yooouuri said:
Thanks for your fast response, how do i know my original CID?
Im going to flash
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
So do i need to change my CID?
Click to expand...
Click to collapse
Just change it to
Fastboot oem writecid HTC__001
Sent from my HTC One S
tominozh said:
Just change it to
Fastboot oem writecid HTC__001
Sent from my HTC One S
Click to expand...
Click to collapse
Thanks
Edit;
If i change my CID to HTC__001 and i run the RUU, i cant change my language to dutch.
@tominozh
Edit;
Changed to HTC__E11, lets run the RUU again and hope!
CIDs list: http://forum.xda-developers.com/showthread.php?t=2139447
tominozh said:
Just change it to
Fastboot oem writecid HTC__001
Sent from my HTC One S
Click to expand...
Click to collapse
Its not mandatory to change your SuperCID back to stock just to install a RUU (with OTA RUU you get problems, but not with normal ones).
yooouuri said:
Thanks
Edit;
If i change my CID to HTC__001 and i run the RUU, i cant change my language to dutch.
@tominozh
Edit;
Changed to HTC__E11, lets run the RUU again and hope!
CIDs list: http://forum.xda-developers.com/showthread.php?t=2139447
Click to expand...
Click to collapse
Where you cant change the language?