So I've been following the stingray nightllies and have seen a few updates to the gapps package. Does anyone know what these updates are doing? I looked around and couldn't find the change log.
Aethoes said:
So I've been following the stingray nightllies and have seen a few updates to the gapps package. Does anyone know what these updates are doing? I looked around and couldn't find the change log.
Click to expand...
Click to collapse
I haven't checked the version numbers, but with EOS GApps v10, everything seems to be running wonderfully! Market is tablet-optomized, gallery seems to be syncing properly, music works...everything works. It is totally worth the wipe to get this level of functionality.
I just saw were Gapps 10.2 was out. I'm still running Gapps 8 with v32 of the EOS ICS nightlies. I figured I would upgrade during the weekend. Could someone please post the link to the new Gapps. I've been looking for awhile and can't find them.
Thanks for the help.
Kenar said:
I just saw were Gapps 10.2 was out. I'm still running Gapps 8 with v32 of the EOS ICS nightlies. I figured I would upgrade during the weekend. Could someone please post the link to the new Gapps. I've been looking for awhile and can't find them.
Thanks for the help.
Click to expand...
Click to collapse
I think that this is the link you are looking for http://goo-inside.me/roms/teameos/gapps/EOS_GApps_ics_4.0.3_v10.2.zip
Related
I'm running CM7.1 RC1 but my talk does not have video chat on it. Where do I get the latest gapps and does anybody know a good kernel to run with CM7.1 RC1?
http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip i think this is the newest GAPPS with talk enabled, you should also try a CM7 nightly and the trinity kernel, i have no problems with this setup.
I tried that gapps already and it did not give me video chat.
http://cmw.22aaf3.com/gapps/
Try this.
Sent from my Nexus S 4G
Which one do I use though? there are so many on that page.
I also found this. But it said it was unofficial.
http://forum.xda-developers.com/attachment.php?attachmentid=602025&d=1305891233
MrDrumngun said:
Which one do I use though? there are so many on that page.
I also found this. But it said it was unofficial.
http://forum.xda-developers.com/attachment.php?attachmentid=602025&d=1305891233
Click to expand...
Click to collapse
They are dated so use the latest one.
Sent from my Nexus S 4G
Make sure you enable video chat in gtalk. Its not turned on by default
Hey Everyone,
I am really excited to see that there is Inverted GAPPS that can be flashed; however, when I look through the forums I see them under everything other than Nexus S.
I have been following the thread at Rootz Wiki (XDA won't let me post link as I have not submitted enough threads), it is for the Galaxy Nexus, and am wondering if the inverted GAPPS here work for the Nexus S, seems I cannot find the right answer anywhere.
I am on Codename Android 1.4.0 with Matr1x kernel. Any advice or proper download and instructions links would be appreciated.
Cheers!
http://rootzwiki.com/topic/15092-invertedtotally-inverted-apps-updated-2-16-google-reader-added/ most of these work for our nexus s i havent tried all of them though
Excellent! Yeah, thanks for the link. Can you tell me which ones worked for you? I'm hoping for Gmail, Email, Talk, Market and Calendar. Also, any special intructions on installing them? I read something about uninstalling updates....I'm not sure how to do that as I have never had to. Thanks in advance.
I should also mention that I flashed the new 404 GAPPS from Codename Android....is this an issue with the inverted GAPPS?
Spuds93 said:
I should also mention that I flashed the new 404 GAPPS from Codename Android....is this an issue with the inverted GAPPS?
Click to expand...
Click to collapse
Not sure about this questions answer, but to answer above, yes. All of those you mentioned worked fine for me.
They have all worked for me on Nexus S and Desire S.
I got mine from http://forum.xda-developers.com/showthread.php?t=1435194
Spuds93 said:
Hey Everyone,
I am on Codename Android 1.4.0 with Matr1x kernel. Any advice or proper download and instructions links would be appreciated.
Click to expand...
Click to collapse
Codename Android 1.4.0 with Matr1x 16.5 kernel here. I've tried two different packages of of inverted gapps, and both seem to crash gmail. This thread* has a few pointers on getting them working, but between the new-to-me acronyms and the somewhat pigeony english, it's a little hard to understand.
Best I can guess is that you need to flash AOKP gapps, reboot, then flash the inverted apps one at a time (the multi-app pack seems to be more problematic).
That said, the ones I installed that work look absolutely phenomenal on the AMOLED screen.
* I'd post the link but the spam filter sez I need 8 posts to put up links. Suffice to say that if you google the phrase "page__st__760__p__478289", it should send you to the right place.
I don't know if this is a general problem or just me but every time I change the build.prop codes then flash wallet,I reboot back up and the NFC options are gone. Im using the latest cm10 on Verizon's s3. I had wallet working on bean stock rom before this as well. Is there a different method for cm10 or is it just not available yet?
pplayz18 said:
I don't know if this is a general problem or just me but every time I change the build.prop codes then flash wallet,I reboot back up and the NFC options are gone. Im using the latest cm10 on Verizon's s3. I had wallet working on bean stock rom before this as well. Is there a different method for cm10 or is it just not available yet?
Click to expand...
Click to collapse
Which CM10 build are you using? It's my understanding that on the current build of the official CM10 NFC is not yet supported. This could be the case on the unofficial ones as well but I'm not sure.
Relentless D said:
Which CM10 build are you using? It's my understanding that on the current build of the official CM10 NFC is not yet supported. This could be the case on the unofficial ones as well but I'm not sure.
Click to expand...
Click to collapse
A nightly unofficial one released last night. 3.0.39
The only thing that is different about getting GW working on CM10 is you don't need to flash anything (except Google Wallet if you are using the .zip provided by ogdobber) and editing the build prop. NFC is currently broken on the newer CM (and all others based off of CM code) for the time being but I would imagine it would be fixed after the main bugs are all squared away.
The last unofficial build I that had NFC working was InvisibleK's 8/13 but that was before the recent MMS or RIL fixes.
Marcismo55 said:
The only thing that is different about getting GW working on CM10 is you don't need to flash anything (except Google Wallet if you are using the .zip provided by ogdobber) and editing the build prop. NFC is currently broken on the newer CM (and all others based off of CM code) for the time being but I would imagine it would be fixed after the main bugs are all squared away.
The last unofficial build I that had NFC working was InvisibleK's 8/13 but that was before the recent MMS or RIL fixes.
Click to expand...
Click to collapse
I figured it out. I was trying to use the same verizon zip file when I needed to use one specifically for aosp roms.
pplayz18 said:
I figured it out. I was trying to use the same verizon zip file when I needed to use one specifically for aosp roms.
Click to expand...
Click to collapse
Do you have a link to get it working?
pplayz18 said:
I don't know if this is a general problem or just me but every time I change the build.prop codes then flash wallet,I reboot back up and the NFC options are gone. Im using the latest cm10 on Verizon's s3. I had wallet working on bean stock rom before this as well. Is there a different method for cm10 or is it just not available yet?
Click to expand...
Click to collapse
if you took the time to read the notes on the release, you would see that it is not supported yet.
Since you did not, now you will likely have a ton of people telling you to read next time.
NFC DOESNT WORK. THEREFORE NOTHING THAT RELIES ON IT WORKS.
Its a piece of hardware, that does not FUNCTION yet.
did you also figure out that NFC doesn't work on any CM10 build yet so it doesn't matter what you flash?
Not to thread jack... but...
It's been quite a few days without any action on this thread and NFC is one thing I'd really like to try out. With that said I love CM10, currently running the 8-27 nightly without any other issues and love it... NFC isn't that important that I'd go back to a TW/Stock Rom for it.
Any word from the CM guys on when/if the rils and NFC functionality will be fixed up? Patiently waiting and love everyone working on CM10 D2VZW! :good:
Flashed the 8-31 nightly and NFC just greys out after ticking the box still. Wake me up when September comes
Sent from my R00T3D/UNL0CK3D SGS3 running CM10 nightlies
I was reading in the official CM10 thread that someone had developed a fix and that it would soon be implemented into the Nightlies
Edit:
http://forum.xda-developers.com/showpost.php?p=30952627&postcount=1317
So I'm trying to prolong the use of this tablet but keep it stable and quick, and I think CyanogenMod is the way to go. There are a number of versions available for it, with 10.0 being the last stable build that I can find. I flashed 10.0 and it was quick and stable, except for one major problem: the Google+ app just would not load no matter what, and by searching I found others had the same issues with no fix.
So I'm back to stock 4.1.2 JB now, which is fine but I'd rather move to CM if I can. I flashed the latest nightly, but was having major issues with Gapps closing and the Play Store wasn't even available (even though I flashed the correct Gapps package).
For those that are using CM, which version is the best to use? Any help would be much appreciated, thanks!
Honestly, I use the CM11 builds and they are working great.
XOOM XOOM!
slinky317 said:
So I'm trying to prolong the use of this tablet but keep it stable and quick, and I think CyanogenMod is the way to go. There are a number of versions available for it, with 10.0 being the last stable build that I can find. I flashed 10.0 and it was quick and stable, except for one major problem: the Google+ app just would not load no matter what, and by searching I found others had the same issues with no fix.
So I'm back to stock 4.1.2 JB now, which is fine but I'd rather move to CM if I can. I flashed the latest nightly, but was having major issues with Gapps closing and the Play Store wasn't even available (even though I flashed the correct Gapps package).
For those that are using CM, which version is the best to use? Any help would be much appreciated, thanks!
Click to expand...
Click to collapse
CM10.1 (based on 4.2.x) really great. I used it for the past few months.
Never give me problem. Of course you must install 2/20/13 JB Unified GApps.
Looking forward to try CM11 but having hard time with TWRP (big part) at the moment.
TheMan0790 said:
Honestly, I use the CM11 builds and they are working great.
Click to expand...
Click to collapse
Another vote for CM11, but you do have to install BigPart. That isn't a big deal if you read carefully through the resource thread before proceeding. I'm certainly not a tech wizard (color TV and phones without dials were big deals when I was a kid, VCRs didn't come out until I was in college, and I was in my mid twenties when home computers just started to become widespread) and was able to run BigPart without trouble.
I got BigPart working successfully with no problems on the first go. Merely requires some reading and should work fine.
Break me off a piece of that Kit-Kat ROM!
This thread is for updates of temasek cm12.1 built by myself. I will be building for hlte and hltespr.
Temasek made this all possible and it is all his work I am just taking the time to build and upload.
V19.3+ root removed, you will need to flash SuperSU zip to achieve root.
Downloads:
Hlte or Hlte on my BasketBuild
Hltespr or Hltespr on my BasketBuild
Credits: @temasek
XDA:DevDB Information
Temasek cm-12.1 unofficial cyanogenmod, ROM for the Samsung Galaxy Note 3
Contributors
trader418, Temasek
Source Code: https://github.com/temasek/
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: Cyanogenmod
Version Information
Status: Beta
Created 2016-03-26
Last Updated 2016-03-26
Thanks for keeping support for the Note 3 alive.
Great, good to see 12.1 back alive. Anything I can do to help, just say so.
Thanks again! Always willing to help however I can.
BTW, really good job on creating the thread using just your phone! I've seen FAR worse.
Buslova said:
Thanks again! Always willing to help however I can.
BTW, really good job on creating the thread using just your phone! I've seen FAR worse.
Click to expand...
Click to collapse
Haha thank you, I try my best
Glad to see all of you guys showing support. If I ever don't see temasek updated the version and any of you do just post here and I'll build, however I think most of the time I should be okay. I'm going to set up a straw poll in the include root vs not include. I also could start to use the ota app if you guys really would like that
Straw poll whether to include root in the build here http://strawpoll.me/7191529
trader418 said:
Haha thank you, I try my best
Glad to see all of you guys showing support. If I ever don't see temasek updated the version and any of you do just post here and I'll build, however I think most of the time I should be okay. I'm going to set up a straw poll in the include root vs not include. I also could start to use the ota app if you guys really would like that
Click to expand...
Click to collapse
I will always use root however I understand some people's need for it to be rootless and well, let's be honest, it ain't hard to flash supersu right after flashing the rom. lol.
OTA is a nice lazy option for the USER but I've gathered from past posts in other threads that it's not always so easy for the dev since the OTA app is maintained/owned by another dev and sometimes has issues. Again, we're talking about a community here who is flashing custom roms on their devices. Manually downloading and flashing shouldn't be a major issue.
Having said all that, if i were to vote I'd say:
Built-in root: No
OTA: Yes (if it's not a headache)
Buslova said:
I will always use root however I understand some people's need for it to be rootless and well, let's be honest, it ain't hard to flash supersu right after flashing the rom. lol.
OTA is a nice lazy option for the USER but I've gathered from past posts in other threads that it's not always so easy for the dev since the OTA app is maintained/owned by another dev and sometimes has issues. Again, we're talking about a community here who is flashing custom roms on their devices. Manually downloading and flashing shouldn't be a major issue.
Having said all that, if i were to vote I'd say:
Built-in root: No
OTA: Yes (if it's not a headache)
Click to expand...
Click to collapse
Ota isn't too bad, I'll probably use it soon tbh, but I won't promise anything
hey guys, I have been having trouble with tema's cm 13 builds so i decided to give 19.1 a shot. Unfortunately, I haven't had any luck with the rom. The rom just boot loops after every installation. I have tried with gapps aroma and pico with different wipes with no luck. continues to bootloop as soon as I reboot and i never get into the rom. I am back on tema's for now but would love to switch to 19.1 if I could get some help. Sorry for being a noob, Im probably messing something up somewhere and I thank you for your help in advance!
redfuryjr55 said:
hey guys, I have been having trouble with tema's cm 13 builds so i decided to give 19.1 a shot. Unfortunately, I haven't had any luck with the rom. The rom just boot loops after every installation. I have tried with gapps aroma and pico with different wipes with no luck. continues to bootloop as soon as I reboot and i never get into the rom. I am back on tema's for now but would love to switch to 19.1 if I could get some help. Sorry for being a noob, Im probably messing something up somewhere and I thank you for your help in advance!
Click to expand...
Click to collapse
Start with which device you have
trader418 said:
Start with which device you have
Click to expand...
Click to collapse
haha sorry! htlespr!
redfuryjr55 said:
haha sorry! htlespr!
Click to expand...
Click to collapse
I'm not sure mate, has anyone else got any suggestions?
There has been reports of multiple wipes and reboots and then flashing the ROM helps but I cannot say it will help
trader418 said:
I'm not sure mate, has anyone else got any suggestions?
There has been reports of multiple wipes and reboots and then flashing the ROM helps but I cannot say it will help
Click to expand...
Click to collapse
hmmm.. well I managed to get booted by installing temasek's last build (12.9 i think, the one from jan) along with his kernel. It booted fine and made it into setup. I then rebooted to recovery and dirty flashed you 19.1. Got bootlooped and said fk it and re-flashed the kernel and got into 19.1! Now that is great and all, but super weird/inconsistent. Also, once I got everything set up I could not turn on wifi or bluetooth; is this a known issue with a fix? Also, are there recommended installation instructions or is there a recommended kernel for you build? Thanks in advance for your help and patience with my noobness! Again I am on htlespr!
redfuryjr55 said:
hmmm.. well I managed to get booted by installing temasek's last build (12.9 i think, the one from jan) along with his kernel. It booted fine and made it into setup. I then rebooted to recovery and dirty flashed you 19.1. Got bootlooped and said fk it and re-flashed the kernel and got into 19.1! Now that is great and all, but super weird/inconsistent. Also, once I got everything set up I could not turn on wifi or bluetooth; is this a known issue with a fix? Also, are there recommended installation instructions or is there a recommended kernel for you build? Thanks in advance for your help and patience with my noobness! Again I am on htlespr!
Click to expand...
Click to collapse
All I know is that all my hlte builds are tested with a clean wipe and then a flash and reboot. I have no problems. I am using temaseks device tree so the only difference between his and my build should technically be root and ota app. Other than that it should be identical
trader418 said:
All I know is that all my hlte builds are tested with a clean wipe and then a flash and reboot. I have no problems. I am using temaseks device tree so the only difference between his and my build should technically be root and ota app. Other than that it should be identical
Click to expand...
Click to collapse
I am using this as my daily Rom, the only problems I get are the weather widget doesn't update and it wont connect to the wifi in my local hospital, I am using build v19.0 build date 17th of march, even my s-pen works !
I will test this later and post back results
swukjay said:
I am using this as my daily Rom, the only problems I get are the weather widget doesn't update and it wont connect to the wifi in my local hospital, I am using build v19.0 build date 17th of march, even my s-pen works !
I will test this later and post back results
Click to expand...
Click to collapse
Either change weather provider to another or customize your location. Sometimes yahoo weather isn't working well.
As for WiFi, check your dev options.
redfuryjr55 said:
haha sorry! htlespr!
Click to expand...
Click to collapse
Just in case - have updated your Modem and Bootloader to the latest? All wireless related problems might be connected to it.
eseregin said:
Just in case - have updated your Modem and Bootloader to the latest? All wireless related problems might be connected to it.
Click to expand...
Click to collapse
what modem/baseband should i use for htlespr? what is tested and working, does anyone know?
redfuryjr55 said:
what modem/baseband should i use for htlespr? what is tested and working, does anyone know?
Click to expand...
Click to collapse
Hmm, still no luck eh? I tried helping ya last night in the other thread. I'm also a hltespr user. I'm still running OH1 baseband however OK2 is the latest. Also, as I told you last night, I'm using an older version of TWRP recovery (ver. 2.8.7) however the latest is 3.0.0.
What baseband are YOU running? Go to settings, "About phone", and look for "Baseband version" and let us know. =)
redfuryjr55 said:
what modem/baseband should i use for htlespr? what is tested and working, does anyone know?
Click to expand...
Click to collapse
Sorry, I have different phone..
Might be the latest here
https://idlekernel.com/flash-tools/firmware/hltespr_SM-N900P/N900PVPUEOK2/
But I am far away from sure