This script can be run on:
2.2.X, 2.3.x, 4.0.x
This script was tested on Froyo [CROM] and Gingerbread [Stock, MIUI, CM7]
Prerequisites:
- I9003 xD
- Busybox
- Root
- CMW or equivalent
- Terminal or ADB
How to use:
- Unzip the zip
- Copy the file [.sh] into the phone
- Open the terminal
- Login as root
- Give execute permissions to the script
- Launch the script as "sh fix_battery.sh"
- Reboot in recovery
- Wipe battery stats
- Reboot and wait 5 minutes before using
F.A.Q
- Recommend making a backup of data to avoid losing files
- I disclaim all liability for damages or problems caused from the use of my script
- This software is licensed under: GNU GPLv3
- If you have problems with the path you can edit my script and replace the present one with your correct.
- In some cases it is better first format the sd card, copy the old file and then run the script
- This script can also improve a few hours the battery life, but does not solve bugs related to the kernel
- For best results take at least 2 cycles of charging
- If you have problems with the part relating to the control of the root user, remove it
I hope that my work is useful
Special thanks to:
http://www.tabletroms.com/forums/general-discussion/4789-fix-battery-drains.html
No offense, but the only thing it does is deleting thumbnail and temp files, i doubt it fixes battery drain
Inviato dal mio GT-I9003 con Tapatalk 2
Yes, that is true!
but in my case i have around 2 hours of battery in plus...
But i have written in the faq:
"- This script can also improve a few hours the battery life, but does not solve bugs related to the kernel "
lol, we'll see if this fixes anything...
i am sorry, i am not understand this steps,
-Give execute permissions to the script
- Launch the script as "sh fix_battery.sh"
can u tell me more details?what the code need to type?
quan815 said:
i am sorry, i am not understand this steps,
-Give execute permissions to the script
- Launch the script as "sh fix_battery.sh"
can u tell me more details?what the code need to type?
Click to expand...
Click to collapse
Yes of course
if you download (e.g. in /download)
unzip the zip that you have downloaded
open terminal emulator (if you don't have download from market)
write this commands:
- cd download (this is an example)
- su
- chmod +x fix_battery.sh
- sh fix_battery.sh
- at the end go to recovery, delete battery status and reboot in normal mode
dont know how to apply it
Areanetwork said:
This script can be run on:
2.2.X, 2.3.x, 4.0.x
This script was tested on Froyo [CROM] and Gingerbread [Stock, MIUI, CM7]
Prerequisites:
- I9003 xD
- Busybox
- Root
- CMW or equivalent
- Terminal or ADB
How to use:
- Unzip the zip
- Copy the file [.sh] into the phone
- Open the terminal
- Login as root
- Give execute permissions to the script
- Launch the script as "sh fix_battery.sh"
- Reboot in recovery
- Wipe battery stats
- Reboot and wait 5 minutes before using
F.A.Q
- Recommend making a backup of data to avoid losing files
- I disclaim all liability for damages or problems caused from the use of my script
- This software is licensed under: GNU GPLv3
- If you have problems with the path you can edit my script and replace the present one with your correct.
- In some cases it is better first format the sd card, copy the old file and then run the script
- This script can also improve a few hours the battery life, but does not solve bugs related to the kernel
- For best results take at least 2 cycles of charging
- If you have problems with the part relating to the control of the root user, remove it
I hope that my work is useful
Special thanks to:
http://www.tabletroms.com/forums/general-discussion/4789-fix-battery-drains.html
Click to expand...
Click to collapse
How can we apply this???
Please include the commands for applying this .. I know I'm still a noob here..
EDIT: OK I knew it.. it just deletes the following:
- /sdcard/android/data/com.android.providers.media
- /sdcard/android/data/com.cooliris.media
- /sdcard/android/data/com.google.android.gallery3d
- /sdcard/android/data/com.android.providers.media
- /sdcard/androidthemes (its only a backup, not required if your rom is fine)
- /sdcard/android/dcim/.thumbnails
- /sdcard/android/dcim/100andro
- /sdcard/lost.dir
Click to expand...
Click to collapse
Silentkiller101197 said:
How can we apply this???
Please include the commands for applying this .. I know I'm still a noob here..
EDIT: OK I knew it.. it just deletes the following:
Click to expand...
Click to collapse
When you delete that files reboot your phone... this is important!
Inviato dal mio GT-I9003 usando Tapatalk
If I delete this file manualy, it's work ?
Because I don't understand how execute the script, even with this :
- cd download (this is an example)
- su
- chmod +x fix_battery.sh
- sh fix_battery.sh
- at the end go to recovery, delete battery status and reboot in normal mode
Click to expand...
Click to collapse
Ryryoku said:
If I delete this file manualy, it's work ?
Because I don't understand how execute the script, even with this :
Click to expand...
Click to collapse
Yes, of course!
I create the script only to speed up the process and make it free from possible errors
sorry for my phrases,
but it's simply stupid and not sense, cm7 battery drain is caused by RIL and its lib, not from gallery thumbs
anyway its not fix and doesn't work,
battery is consequence by governor, voltage, and cpu usage, delete cache of gallery will only drain battery for re build, two hours plus in your cases doesn't depend from this but, maybe from coherence in your use
Sent from my GT-I9003 using xda premium
"Those, who fail to read history are bound to repeat its mistakes"
People here have and did and will fail to read the things here and many did and many probably will have to lose their devices. You don't have to lose a device to get knowledge inbetween your ears.You don't have to be stupid. You surely can learn from your mistakes. But There's a better way. You can learn from others mistakes. This thread is a compilation of such mistakes ,that I personally have done and many others ,who did and their solutions aka The easy ways.
So, officially I congratulate you for finding this thread and reading Upto here. So, even if you don't read the whole thread, these are the main stuff you must know is
1. Rooting is a dangerous process -done by developers only. If you did root your device, you assume full responsibility for your device. So, if you can't think like one of the developers at least partly, I suggest you don't root your device ,coz when you mess up, the one who deviced the procedure or Rom will not help you. And everything you find here is in "AS IS " tag.
2.If you have rooted, next thing you must do is backup-
Go to recovery,
go to backup and restore
click backup.
I find it strange that this is not included in the root procedure. This surely would've helped a lot of Picos out there.
3.NEVER DO A RUU
-It unanimously holds the number ONE title for the major causes of bricking of Picos.
Trust me -Surely you can save your device, without the ruu. And with ruu, you're bound to fail without proper knowledge and research.
The only time you are suggested by experts to do a ruu is when you have already done a ruu "and" bricked it.
4. Overclocking here may cause burnt nand. -know what Rom you're using-it may have built in-overclock .
However, overclocking doesn't necessarily produce burnt-nand for all devices.
5.Finally, Not all answers you receive in the question and answer thread are good. Some answers will kill your device. So please judge the credibility of the answerer before you follow the answers. Generally, you could track back their previous answers and their working. Thanks meter is a good source of credibility -but not always -Not all who have big thanks record are helpful neither are they knowledgeable-There are spammers, who trick people into giving thanks.Do your home work before you trust a stranger. Recognized developer title is a good source of credibility.
The above five should save you a lot of trouble.
Ever in trouble? Drop by and read.
Do your googling,if you don't understand anything here.Have a great time !
Re: [faq][newbies only][mini edition]
��To start, this thread is only for newBies,who have rooted thier Rom and have a custom recovery. If you haven't, click here
Alright, this thread aims to answer all the frequently asked questions by newBies. The section this thread aims to answer will consist mostly of custom Roms especially cyanogen.
To start, we'll start with basics
Our phone consists of the following five partitions
1.Boot/kernel
2.Recovery
3. System/Rom
3.1What's not working
3.2 Latest links
4. /cache- error /last log
5.Data
5.1Scripts
6.Common issues after flashing Rom, scripts/GAPPS/PLAY STORE /
Ram
7. USB and CPU ,screen and power button-2/7/13
8. About developers and members
9. ��Burnt nand*recovrecovery 25/6/13 *��
10. STILL CAN'T FIND THE ANSWER ��
10.1LOGCAT
10.2ADB
11.MINI TIPS AND TRICKS
11.1CM9/10 themes
11.2.FONT CHANGING AND language तदधा ಥಮು support adding
11.3.DID YOU KNOW?
12. Recommended apps
13. BATTERY LIFE AND PERFORMANCE
14 .http://forum.xda-developers.com/showthread.php?p=38098604
BUILD. PROP TWEAKS
We'll discuss the faq in each.
All links are here
Index:
http://forum.xda-developers.com/showthread.php?t=1754876
This is the best link you'll ever have
Thanks hrkh83
Guides
http://forum.xda-developers.com/showthread.php?p=36057579
Guides for everything
Thanks hpsgill
Make yourself useful by akshat
Seen it before,
Just read this now
http://forum.xda-developers.com/showthread.php?p=37805872
Stock Roms instead of bricking ruu
tk immortal yash
http://forum.xda-developers.com/showthread.php?p=39101954
Re: [faq][newbies only][mini edition]
/BOOT(4 MB Max )
1.what does this partition contain?
It contains your kernel
2.what is kernel?
It's a in betweener between ROM (/system ) and your hardware.
Basically, a software, which connects the main software (your Rom gui) and the hardware
3 .what is the stock kernel version?
2.6
4. Is there a update available?
Yes. You can update it to 3
3.4 is currently being worked on
5.what are advantages of kernel 3 ?
Nothing much that you can feel
Basically related to stability, security, and future Android Os updates can easily be done for a310e
5.where are the links to kernel 3 ?
Look down
6.what's not working in kernel 3 ?
1.Ext4+kernel 3+mount2SD/s2e/link2SD doesn't work.
2. CPU states file reading ~fixed in overclocked kernel ~fixes yet to be fully implemented across RomS [overclock may cause burnt nand/recovery ]
With cm9
1.Firewall
2.USB tethering
3. Wi-Fi hotspots
4.Vpn
Anything related to iptables
With cm10
Known issues
Ext4 cannot be mounted?
Temple run 2 and subway surfers reboots*fixed in overclocked kernel *burnt nand *
7. What's not working in kernel 2 ?
garuda v5
Data usage option in settings in jelly bean.
8.what's not working in kernel 2.6 sakindias cranium kernel?
Build #2
Lag
Build #3
No support for Android native a2SD
Build #4
Same as build #3,but advertised as faster
9. I wanna make my own kernel?
Special thanks to bhargz16
http://forum.xda-developers.com/showthread.php?t=2114594
10.Is there a overclocked kernel?
Yes
http://forum.xda-developers.com/showthread.php?p=38098604
11. How to Flash kernel? Do I need to clean install?
No need to clean install
Copy zip to root of /SD card
Go to recovery
Install zip from SDcard
Choose the correct zip
Install
Reboot
Go back to main ^|^
Re: [faq][newbies only][mini edition]
/Recovery(5 MB Max )
First thing to do after root is to make a nandroid backup.
Go to backup and restore and select backup
1.what is this partition?
It contains your recovery
2.what is recovery?
It's a specialized partition for Android, which is used when something goes wrong.
We use it to change (flash) Roms, change kernels and mostly everything in xda. Make nandroid before you mess up
3. What are the recoveries available for a310e ?
1 .yannou90 (cwm5) recovery
2.Twrp 2 .3 by cute prince
3. twrp 2.2 by oblikas
4.cwm6 by sakindia
5.*OFFICIAL *The latest TWRP by bhargz16( http://forum.xda-developers.com/showthread.php?t=2123503 )
6.cwm6 by nihar.g
Links .check index link in top post
4. Are all of them stable?
The 1 and 5 are pretty stable.
What's not working:
cwm6 by sak let me down big time .
http://forum.xda-developers.com/showthread.php?p=38734554
Except 1,all other recoveries will not show charging animation, when you are charging your phone after switching it off ~instead of charging animation ~you'll be going to recovery
twrp official - some problems with ext4 partition has been reported and also reported to have been fixed. -I never had the problem before and after and I recommend this one 2.5 present here in xda.
twrp cute prince has issues restoring backups (problem with symlink )
5.what's the difference between them?
cwm5 - complete backups of all partitions
twrp - support compressed backups /file manager and other great things
cwm6 - your SD ext partitions will not be fully backed up during subsequent backups,but only the changed files greatly reducing the size of subsequent backups
6. Can you explain more about cwm ?
http://forum.xda-developers.com/showthread.php?p=38100620
7. Recommended apps.?
Recovery file manager aroma 1.8
8. How to flash a recovery?
Two methods described in detail in link above by bhargz16 ~ fast boot
Flash from phone:
Required:
Flash_image binary
You can flash any recovery
From terminal using
Code:
su
flash_image recovery /sdcard/recovery.img
You need recovery.img (renamed like that ) present in /sdcard itself
9. Error while restoring .Androidsecure /sdext ?
http://forum.xda-developers.com/showthread.php?p=39874898
10. Cannot go to recovery /burnt recovery /unable to flash recovery?
Use
Code:
fastboot boot recovery /sdcard/twrp5.img
or
Code:
fastboot boot recovery.img
or
Code:
fastboot boot /sdcard/twrp5.img
You need twrp5.img or recovery.img present in /SDcard and renamed like that itself.
After booting into recovery, you can do everything you please. ~flash erase format and install new Rom and boot the device
After booting up the device, flash erase mtd1 through terminal emulator.and then flash a suitable small recovery. And then pledge here that you'll never overclock ever again.
Go back to main ^|^
Re: [faq][newbies only][mini edition]
/SYSTEM (235 MB Max )
1.what is it?
Here's where your Rom resides
Any cyanogen /ever/miui roms all go here
2. What are system apps
Any app in /system /app is system app and they have special permissions
2.1 how to make a app system app?
Uninstall the app with titanium backup and copy it's apk to system/app(normal delete apk will not delete. Dex and lib files ) ~reboot ~
Some apkS need it's library file also in /system /Lib (copy from /data /Lib to /system /lib )
3.what is binary?
These are executable ~very important files in /system /bin. (or /xbin in recovery)
Your root su is here
4. What are the roms available?
Many roms are available in xda
Main line ones are
CYANOGEN 7
CYANOGEN 9
CYANOGEN 10
Cyanogen 10.1
Miui
5.What is cyanogen 7 ?
It's a cyanogen version of gingerbread
9 is ics
10 is jelly 4.1
10.1 is jelly 4.2
5.1 what's the development going on?
cm7 *camera was unable to be fixed *development stopped
cm 10*active development now *
cm 10.1 *thread closed *
6. How to install a new Rom? Cyanogen for example?
Download the latest build. Zip and put in the root of /sdcard.
Go to recovery
Factory reset data
Wipe cache
Wipe dalvik
Wipe SD ext
Choose install zip from /sdcard and choose the build. Zip
Wait
Reboot
Go back to main ^|^
The nothing really bugs list
Welcome to THE "NOTHING REALLY" BUGS™
This is the official nothing really bugs Pico web post at xda. Its name implies that the bugs present are really nothing to some people. But to the rest, it may bother a lot. So, this post.
Here you'll find most of the nothing really bugs. All statements having "Nothing really " in bugs list directs here. This is to inform new flashers of what they'll get and what they won't. To make the facts clear,so that you won't have to flash every Rom to find out all the nothing really™ bugs. After all, this is a newbie friendly thread.
Please note that though every effort has been taken to ensure an exhaustive list of all the bugs .Some may not have been stated here .If you do find a bug, which isn't stated here, please feel free to mention it here and I'll add it after being personally confirmation by me or two to three renowned senior member witnesses. Further more, some bugs here may have been fixed. You can take a look at the last edited day of this post to make sure this post is up to date. And you can mention it here,if any of the information found here is wrong.
1.What doesn't work in cm10 4.1 Jelly beans ?:
1video (video recording with some third party apps~Skype video messaging, zoom camera ,camera magix and a lot more)(S. ucam works fully)
2Bluetooth headphones can't be used during call(try using sound about )✘
2.1 Bluetooth stereo headphones ✘
3vsync
4.stock camera force close often and unstable (S. Camera 360/ucam)
5.Wi-Fi unable to turn on ~from settings /notification bar. (s:Flash kernel 2.6)
6.burnt nand
7. Wi-Fi direct (native )causes reboot. (S. 3Rd party app ~fast file transfer)
8.some VOIP~{ex:gtalk(even after normal gapps),and many more}
9.Most streaming video{not flash, but those, which open in mx} doesn't work. Most TV apps don't work (not flash using tv apps)
10. mobile data may fluctuate for some(timedo app to turn on and off airplane mode for every hour)
11. calls robotic call for some
http://forum.xda-developers.com/showthread.php?p=32997468
12. Unofficial adobe flash is flickering too too much. (Only Firefox actually works with flash..which flickers unbearably ~the rest don't even work )
13. Headphones volume control during in call✘
14.USB tethering (native)✘
15. Wi-Fi hotspots work only as open source ✘
16.Bluetooth A2dp streaming ✘
17.Firewall rules don't stick, when put in init.d. Somehow the Rom process overtakes the firewall rules during boot and during some process. My intuition directs the blame at bandwidth controller| throttle service~|Data usage settings|which wasn't implemented properly, but using dirty hacks
18. USB mtp and ptp not working at all. USB mass storage not working for certain devices ~double mounting. (s.flash kernel 2.6 with USb mass storage fix here. )
19. Multi mount SD app doesn't work [s.flash kernel 2.6]
OTHERS
1. Battery drain
2.Phone heating
3.WiFi toggle
Total :22[Because, I used this Rom for a long time,so the large number]
✘- Unconfirmed by me .The rest are personally tested and confirmed "not working " and again confirmed to be a problem of Rom itself.
2.What doesn't work in cm9 ?
forum.xda-developers.com/showthread.php?p=35756952#post35756952
2VIDEO PLAYBACK doesn't work as well as stock
3 Wi-Fi toggle in latest RomS
4 Bluetooth stereo headphones ✘
Experienced by some:
A. Encryption doesn't work (crypt)✘
B.robot call http://forum.xda-developers.com/showthread.php?p=32997468
C.mobile data flickering
Note: video playback is much better in cm10.
Language rendering is also much better in cm10.
3.what doesn't work in Original HTC STOCK ROM?
A. if you ever click "reset to default" in the Camcorder settings..,all future video recordings will overwrite already taken videos and all previous videos will be lost(use ucam)
B. sending a more than 150MB file on Bluetooth file manager app through Bluetooth will reboot your device.
(use stock transfer)
3.1 what's not working in a rooted stock Rom?
(make a nandroid backup first to protect you)
Optimize storage in storage settings
Factory reset will put you in bootstruck.
4.What doesn't work in cm10.1 ?
Camera and lot more minor/major
Too long list
Will update when usable
5.what doesn't work in cm7 ?
Camera
6.what's not working in kernel 3 ?
1.Ext4+kernel 3+mount2SD/s2e/link2SD doesn't work.
2. CPU states file reading ~fixed in overclocked kernel ~fixes yet to be fully implemented across RomS [overclock may cause burnt nand/recovery ]
3.Wi-Fi toggle from notification bar /from settings
4. USB mtp and ptp not working at all. USB mass storage not working for certain devices ~double mounting.
5. Multi mount SD app not working.
With cm9
1.Firewall
2.USB tethering ✘
3. Wi-Fi hotspots ✘
4.Vpn ✘
Anything related to iptables
With cm10
Known issues
Some partitions [?Ext4] cannot be mounted
*burnt nand *
With latest cute prince kernel [power management fix ]:
Mounting of SDcard on some devices
Multimount SD app
7. What's not working in kernel 2 ?
garuda v5
Data usage option in settings in jelly bean.
8.what's not working in kernel 2.6 sakindias cranium kernel?
Build #2
Lag
Build #3
No support for Android native a2SD
Build #4
Same as build #3,but advertised as faster
9. Sense4 Roms
1.Burnt nand ~most common ✘
2.Random reboots ✘
3. WiFi direct. ✘
4.Bluetooth headphones ✘
Go back to main ^|^
✘- Unconfirmed by me .The rest are personally tested and confirmed "not working " and again confirmed to be a problem of Rom itself.
S - probable third party solutions
Solutions for burnt nand -Please go to burnt nand section.
[COLOR="RED"]Welcome to [b]▶LâTêS†↭ⓛⓘⓝⓚⓢ™◀[/B][/COLOR]
Welcome to ▶LâTêS†↭ⓛⓘⓝⓚⓢ™◀
Not sure whether it'll be updated,but galaxyfreak released a app on latest Roms ~ http://forum.xda-developers.com/showthread.php?p=38913186
Why this post ?
Because index has only thread links and sakindia123 never updates op
If he does, then this post will not be updated anymore. Other than that, here are some kernel links as well. Other than the main line ones, the others are not updated. Sense4 links are already present in op and here as well http://forum.xda-developers.com/showthread.php?p=40111838 . Any link that's not present in op will only be updated.
1.what's the latest build on cyanogen 9?
Build 13
http://forum.xda-developers.com/showthread.php?p=36626369
#14*beware of burnt nand *
http://forum.xda-developers.com/showthread.php?p=38770875
2.what's the latest build on cyanogen 10 ?
Build 3.2.2.use with kernel 2.6
http://forum.xda-developers.com/showthread.php?p=38183817
Liverpool fan latest 3.2
http://forum.xda-developers.com/showthread.php?p=38447868
Beta 5~beware of burnt nand ~
Video fix by bhargz*liverpl 4 beta5*
http://forum.xda-developers.com/showthread.php?p=39124906
http://forum.xda-developers.com/showthread.php?p=39090779
Beta6~beware of burnt nand ~
http://forum.xda-developers.com/showthread.php?p=39166124
+
http://forum.xda-developers.com/showthread.php?p=39804373
(Flash this to prevent overclock)
Lock screen fix for both beta 5 and 6 .
http://forum.xda-developers.com/showthread.php?p=39043840
2.1 Aokp build link
http://forum.xda-developers.com/showthread.php?t=2208242
3.what is the latest build on cyanogen 10.1 ?
Alpha 3
http://forum.xda-developers.com/showthread.php?p=38094629
Alpha 4
http://forum.xda-developers.com/showthread.php?p=38325531
4.what's the latest build on kernel?
Old Kernel 3
http://forum.xda-developers.com/showthread.php?p=36572115
Kernel 3 v2 only for sense
http://forum.xda-developers.com/showthread.php?p=38466559
http://forum.xda-developers.com/showthread.php?p=39730163
Kernel 3 v2 for cm10
http://forum.xda-developers.com/showthread.php?p=39737920
http://forum.xda-developers.com/showthread.php?p=39804373
5. Is there a overclocked kernel?
http://forum.xda-developers.com/showthread.php?p=38098604
kernel 2.6=garudav5kernel
6. Kernel 2.6 for JB ?
http://forum.xda-developers.com/showthread.php?p=37649737
http://forum.xda-developers.com/showthread.php?p=36303556
7. Kernel 2.6 for ics?
http://forum.xda-developers.com/showthread.php?p=35797210
http://forum.xda-developers.com/showthread.php?p=36526379
http://forum.xda-developers.com/showthread.php?p=37550173
8. Side effects and solution of using kernel 2.6 on a kernel 3 based Rom:
http://forum.xda-developers.com/showthread.php?p=39452607
Basically, USB storage may not work.
To, make it work, Flash the fix attached with this post(don't remove battery @ any stage:sly-tested on my twrp 2.4.4 with cm10beta5.May not work with ics.
Alternatively, you can use multi mount SD app /root tool box lite app.
Attached zip md5: 8216eaf4a357b9cddc5cfd29b8d05a50
Attached zip sha-1: 408a075479745fe1713f8c55a968801f7f6160dd
Some more links :
http://forum.xda-developers.com/showthread.php?p=40964578
Super wipe zip
http://forum.xda-developers.com/showthread.php?p=38338418
Nand recovery procedure:
http://forum.xda-developers.com/showthread.php?p=38098622
tk to akshatshenoy.
Flashing an older ruu:
Not recommended @ any stage
http://forum.xda-developers.com/showthread.php?p=38694608
Even if it works,you might have problems data, battery drain etc.. if you Flash a wrong radio
KERNEL RAMDISK exchange on Android itself:wip
AUTORAMDISK™ EXCHANGE PROJECT alpha™
http://forum.xda-developers.com/showthread.php?p=40035607
How to install kernel? Clean?
http://forum.xda-developers.com/showthread.php?p=38098513
QUESTION NUMBER 11 ABOVE
Go back to main ^|^
Re: [faq][newbies only][mini edition]
/DATA (150 MB )
1.WHat's this?
It is the internal memory
2.Why is it important?
Because this is the place where all the apps go
No /data = no more apps
3.what's our available internal memory?
150 MB
User available 90 MB
4. Any way to increase internal memory?
By scripts
5 .Recommended apps to diagnose application not installed
Diskusage app
Log cat
6. What does a app contain?
App when installed splits into apk dex,and data(lib+data) files
Go back to main ^|^
Re: [faq][newbies only][mini edition]
SCRIPTS
Before we start, a app when installed takes space as three parts.
They are apk,dex and data (lib+app data)
All scripts work by symlinking
1. What are the scripts available for our explorer?
Partial scripts
A.Link2SD app
Moves apk,dex,lib~doesn't move app data
B.Root data2SD app
Need ext partitions
Moves application data2 ext
Full scripts--Need init.d support able to move fully /partially as per requirements
Links available in index
1.Mount2SD
Download from play store or from here check index
Famous for it's stability and frequent updates
Issues +
2. Int2ext
As per script, moves partially /fully .
Has a large user base
issues ++
3.s2e
Moves fully.
Issues +++
NO official version for jelly beans.
4.a2sd darktremor
Issues ++++
However works pretty well with stock Rom and jaggy Rom
Discontinued
5.ungaze script
Issues +++++
I don't recommend it.
Why not?
Because
http://forum.xda-developers.com/showthread.php?p=33750812
http://forum.xda-developers.com/showthread.php?p=31915607
1.1 mount2SD doesn't work? Script not executed fully @ boot?
Flash kernel 2.6 from above and you should be good to go.
2. How do I increase internal memory (literally ) from 150 MB to 2GB(for example SD ext )?
Use mount2SD reverse mount
Use int2ext
Side effects:
As per Android rules, 10% of internal memory will be unavailable
So, 200 MB out of 2GB SD ext will be unavailable
Mount2SD also has normal moving methods ,which will make Android think you'll have 150MB but you can fill up 2GB inside of 150 MB (Here 10% would mean 15 MB)
3. I installed d2ext/similar ,I'm not able to install more apps ,even though I have more SD ext space?.
A. First make sure you don't hit 10% data limit described above
B. Use diskusage app to determine,which partitions are full
For example- some scripts don't move dalvik and so dalvik will fully accumulate in /data creating no space.
C. Fix permissions from recovery, wipe cache and dalvik and reboot.
4. My Rom doesn't have init.d support /I'm using stock Rom?
Check index
You can add init.d support by
Flashing custom kernel (cranium)
Flashing scripts to make init.d support (or pimp my Rom app[not tested])
5. Where to add scripts before flashing Rom?
Add it in /system/etc/init.d (permissions are rwx rwx rwx ,if you're adding this in recovery after flashing )
For mount2SD add configurations folder in /data/m2sd.
6. How to migrate from link2SD to mount2SD?
http://forum.xda-developers.com/showthread.php?p=38840247
7. Is there a full script so that I can use both my internal memory and SD ext?
A bit complicated, but this what I use...
Configure mount2SD
To move both apk and dalvik
Don't move data.
Then open titanium backup to move app data
@First move one app data to create data2SD directory.. then you can batch move whatever apps you think fit.
But please make sure you have at least 10 to 30 MB in /data and in/SD ext (SD ext not necessarily ) before a nandroid backup. Otherwise restoreS will not work.
Go back to main ^|^
Re: [faq][newbies only][mini edition]
Common issues with scripts:
0. Device stuck @ HTC logo with 4 error icons on all four corners
Since you flashed an ruu and failed user data fail etc.
Unlock bootloader if possible
Flash twrp recovery again
Code:
fastboot flash recovery.img
Then go to recovery with this command
Code:
fastboot boot recovery
Now that you're in recovery wipe everything, format everything .
If flashing failed /you can't enter recovery, do this keeping twrp recovery.img in /SDcard
Code:
fastboot boot /sdcard/recovery.img
Do cute prince recovery procedure shown in burnt nand section
Flash erase mtd3 as well
Now Flash your Rom and boot
If it doesn't boot, repeat the whole procedure above and now
Do ruu.
If all the above failed,
http://forum.xda-developers.com/showthread.php?p=39181288
Read the above thread fully. That's the last resort.
Moral : Don't ever Flash an RUU (if you haven't already )
You can Flash stock Rom ~safer
1. Device struck in HTC logo
Wait for 15 minutes
Try pulling out battery and reboot
Update busybox and try installing scripts again
Convert your partition to ext3
Change your kernel to 2.6
2. Mount2SD ~apps update after every boot?
Turn cache off in app
Turn safe mode off
Clear cache and dalvik ~fix permissions ~reboot
Common issues after flashing:
1. I get status 7 error?
Open archive with Bluetooth file manager and check archive integrity
Try different compression method(thanks hpsgill)
Delete system apps
2. I get status 0 error?
Update binary used is different
Exchanged update binary from a working zip to this one
Other errors can be cured by changing recovery .
http://forum.xda-developers.com/showthread.php?p=38469360
Common issues after flashing Rom:
1. Always do a clean install
To wipe everything except /sdcard.
Even in /sdcard delete Android /data after backup
2. No I won't listen. I want to do you a dirty install. Show me how?
Your choice
http://forum.xda-developers.com/showthread.php?p=35903694
3. I get force closes of all apps?
Dalvik problem.
Clear cache and dalvik cache and reboot
4.I get force close of a specific app?
If it's a paid app, then you need to change your Android id to your original Id with Android id changer /titanium backup
Not a paid app?
Clear cache and data of that app and reboot
Fix permissions
5.reboot after reboot?
Thanks bhargz16
Kernel problem. Change kernel
GAPPS:
1. This gapp always force closes?
A. If it's a gapp found on play, just uninstall that gapp from system using titanium backup and then reboot and install from play store.
B.if not found on play, then try flashing a different gapps version from goo.im .
Make sure you have enough space on /system and on /cache before flashing and then flash. If not delete unused apps like stock keyboard ,etc
2. RPS5~AEC0/927/any other error while downloading apps from play?
A. Clear data cache of play store app
Reboot
B. Clear data of google services framework
Reboot
C. Remove your google account and re add it. Reboot.- this worked for me.
3. All my apps are missing from installed apps in play?
Wait for some time,if you've flashed a new Rom
Clear data and cache of play store
Reboot
Download app eric market fix *use @ your own risk *
Repeat the solution of questions 2.
Go back to main ^|^
Part 2 on next page :thumbup:
Re: [faq][newbies only][mini edition]
CPU:
1.Can you overclock?
IMO,
All overclocking burns nand.
It's just a matter of sooner /later.
Read this post before attempting anything
http://forum.xda-developers.com/showthread.php?p=38445346
Burnt nand recovery procedures here ~~the third post below this post
http://forum.xda-developers.com/showthread.php?p=38098622
The links below are old. All latest Roms come with overclocked burning kernels.
cm10:
http://forum.xda-developers.com/showthread.php?p=38189883
cm10.1:
http://forum.xda-developers.com/showthread.php?p=38336080
gpu oc
http://forum.xda-developers.com/showthread.php?p=38331698
cpu oc
2. Governors ~what are they?
As the name says they govern when the cpu should go to higher speed and when they should sleep
Performance governor always keep your phone at Max
Powersave keeps your cpu always at low
USB :
1. Flashed kernel 3 and USB doesn't work.?
Flash kernel 2 back.
2. I want to know how to fix USB +kernel 3?
Don't know
3. Can I have usb otg ?
No, not yet.
SCREEN AND POWER BUTTON and soft keys:
1.SCREEN turns on after turning off ?
A. Some apps are trying to make screen on. After screen turns on, go to settings immediately and open running applications, you may be able to find the culprit. It's probably the app, which is restarting. Some apps like lock any app screen etc. Logs could be helpful.
B. Some users reported it could be a hardware problem -look below for power button issues.
C. Some users reported it could be a script problem (rare )
2. My home screen button and /or search buttons doesn't work?
A. Did you do a dirty install of new Rom
Clear cache and dalvik and fix permissions and reboot
B. Copy com.Android.providers.settings /databases from your previous nandroid backups(use yaffs file manager /nandroid manager)and paste it in it's respective location now (paste it using file manager in recovery )
C. If that doesn't work, clean install again
Tech savvy? ~search for device provisioned 1 in cyanogen forums
http://forum.xda-developers.com/showthread.php?p=38633404
3. Power button doesn't work properly ?
A. If it's not a software problem(try the above solution first),then you broke it.
If you broke it, avoid using the power button anymore-use attached scripts indeed.
There are apps in market to simulate power keys.
Or
http://forum.xda-developers.com/showthread.php?p=38633404
Go back to main ^|^
Re: [faq][newbies only][mini edition]
Miscellaneous topics:
Subject to change without prior notification
Developers:
1. Who are the developers that make these roms?
1. Cute_prince
2.sakîndia123
3.derefas
4.lirokoa
5.liverpool fan
6.bhargz16
7.nihar.g
8.ngolralph
And many others. The above are the developers of the roms that I used and present in no order.
2. Why doesn't sakindia123 update the OP ?
Disclaimer: Since it is one of the most faq by newbie,I'm forced to discuss here. I personally do not know sakîndia. If you still want more info, contact senior member hpsgill
You see.. He does nothing without reason. If he doesn't, then the last build present in op will be more /less equal to the latest build. There are other reasons ,which if I had to speak of them all, time wouldn't let me and I would have to deal with flaming members and mods and deleted posts and locked threads . Furthermore that question is well out of the scope of this thread. You are instructed not to ask this question any where.
YOU HAVE BEEN WARNED.
3. How can I contact these developers?
You can by studying Android development and codes, bccms,404s,tr2s and then talking to them. You'll have better luck talking with non recognized developers than the rds.
And try discussion threads .
4. Why doesn't a developer answer my question? (I'm being polite here)
Because the developer doesn't know the answer
w.r.f to http://forum.xda-developers.com/showthread.php?p=38095857
Or your question has already been answered. Try searching for your question at the least 10 pages back.
or your question is too silly to answer
Or your question is not seen ,because they don't have time .
5. Why do they do this ?
For passion of development, addicted, and for learning purposes.
So, that means they don't work for you. They don't help you. They do what they want.
6. I feel a emptiness around forum members. Was there a developer who worked here, yet left without goodbye?
Well not sure about goodbye, but yes his name is jaggyjags.
sakIndia123 came only late and his first work his cranium kernel, which he abandoned like it was nothing.. buried it along with jags. Cruel things did happen before you were here.
Go back to main ^|^
Members:
1. Why won't members answer my question?
Again, thanks to bhargz16
http://forum.xda-developers.com/showthread.php?p=38095857
Or question has already been answered over and over again. Try searching for your question and read at the least 10 pages back.
Or they don't want to help you
Or may be you aren't polite
Or they want thanks
2. Why do they want thanks?
You see.. you should hit thanks for them in order for them to reply
3. Why hit thanks?
Because they are thankaholics .
This addiction
Some call it want,
For some it's need
Some call it greed
And some call it hunger
And some childish foolishness
Never hit thanks, unless you mean it. Never sell yourself short. Mean it, then hit it.
http://forum.xda-developers.com/showthread.php?p=32867800
My first thread closed by mods
:crying:
Having said that, please do be grateful for what you receive. Hitting thanks is like giving a eternal reputation mark on them rather than just saying it. Saying just makes a temporary mark. Get it. 
4.what is spam?
Spam is going out of topic . It never should be done in dev threads unless thread is dead.
Some do the work of mods pretending to be mods.
5.who are mods?
They are moderators who have power to ban anyone at will (in short )
And they are losing patience
http://forum.xda-developers.com/showthread.php?p=37950595
6.Can I spam here?
Feel free to speak what you want..
7. If I feel something wrong is going on /flaming /threatening, who should I report to?
You can use the report system~that (!) mark over every post. Click it and your issue will be resolved within a hour(probably ).
Go back to main ^|^
[color="red"] [b]
0110…380“30…4010¨¨1WELCOME TO NAND/recovery BURNT ZONE 0110…380“30…4010¨¨1
0„30†2Moved by touch0160†640„30†3Inc.
0110…380“30…4010¨¨1DON'T FLASH AN RUU AT ANY STAGE 0110…380“30…4010¨¨1
0. What's burnt nand?
It's condition caused by overclocking(oc)[CPU oc ,to be specific. For gpu oc,go to the last part of this post question 10 ] resulting in bad blocks all over your system, data, cache and recovery.
Important: Use diskusage app to determine size. Don't go by phone's inbuilt settings
A case of burned /system partition in cm10 beta6 running overnight:
Uploaded with ImageShack.us
A late case of burnt nand of /data :
Uploaded with ImageShack.us
1 &2:Not applicable anymore. Peace!
3. No one has burnt thier nand*it's just some people think that thier nand is burnt * is this true?
Well, I'm sure, going through the forums and q &a ,I know that people have indeed burnt thier nands and some just by using the overclocked kernel without even overclocking.
Sources:
http://forum.xda-developers.com/showthread.php?t=1847002&page=400
http://forum.xda-developers.com/showthread.php?t=2243719
http://forum.xda-developers.com/showthread.php?p=39985385
http://forum.xda-developers.com/showthread.php?p=39799173
http://forum.xda-developers.com/showthread.php?p=39439861
http://forum.xda-developers.com/showthread.php?p=39428922
http://forum.xda-developers.com/showthread.php?p=39402187
http://forum.xda-developers.com/showthread.php?p=38941663
http://forum.xda-developers.com/showthread.php?p=39216556
http://forum.xda-developers.com/showthread.php?p=38945489
http://forum.xda-developers.com/showthread.php?p=39197918
http://forum.xda-developers.com/showthread.php?p=39169697
http://forum.xda-developers.com/showthread.php?p=38657723
http://forum.xda-developers.com/showthread.php?p=40616272
http://forum.xda-developers.com/showthread.php?p=39331139
But below is a strong correlation with bad block proof between overclocking and burnt recovery. Yes it burns recovery too.
http://forum.xda-developers.com/showthread.php?p=39196574
THE ABOVE LINKED POSTS ARE MOSTLY SOLVED BY ME OR SENIOR MEMBER S, BUT SOME HAVE LOST THEIR DEVICES. IF YOU CAN'T FIND THE ANSWER HERE, I SUGGEST YOU READ ALL THE LINKED POSTS-VARIOUS DIFFERENT METHODS HAVE BEEN EMPLOYED.,WHICH ARE TOO LONG TO EXPLAIN HERE. READ AND READ-YOU'LL FIND.
4. What are the symptoms of burnt nand?
Early symptoms:
You'll notice a strong drop in your free space in /data
Late symptoms:
/data free space is Nil /below 50%of what you saw before
Error in /cache /recovery/log.
Error in /cache/recovery/last log.Not readable.
No apps can be installed
Rom lags like hell
No Rom can be flashed /boots
Previous nandroids ,which are successfully restored before fails to restore now.
Really abrupt and fast restores with twrp
RUU cannot be done ~user data(mtd5) fail. System fail (mtd3)
5. How can I diagnose burnt nand early?
If you suspect burnt nand ,
1.Watch out for free space in /data and watch out for sharp reduction.
2.Download this app Disk Usage and watch out for increase in system data in /data
http://forum.xda-developers.com/showthread.php?p=39464989
3.Make a dmesg and look for these errors
http://forum.xda-developers.com/showthread.php?p=36834988
4.Definitive method is this :
shahrooz_ra said:
hello
is there any linux terminal command for check badblock on nand memory?
Click to expand...
Click to collapse
1.DOWNLOAD THE TERMINAL.ZIP ATTACHED BELOW
2.EXTRACT TERMINAL.ZIP INTO /SDCARD/lol [create a folder named lol[small letters ]in SDcard, if there already isn't one ]
3.Open terminal emulator on your phone
4.type or copy and paste this code and press enter
Code:
su
cp /sdcard/lol/runme.sh /r.sh
chmod 0755 /r.sh
/r.sh
5.if it doesn't work first time, paste twice.
6.If pasting twice doesn't work, type each code one by one -you'll surely get it. Come on-its just 4 lines -type it lazy!
And Now you'll see the number of bad blocks you've got.
You can also Flash the zip below[for which you have to go to recovery ]or execute the attached script badblocks.sh as root.
6. What are the parts affected by burning?
Proved to affect
/Data
/system
/cache
/recovery
Rest is unknown
7. Ok I managed to burn my nand What are the recovery procedures available?
I SIMPLIFIED THINGS HERE BY MAKING A FLASHABLE FLASH_ERASE. ZIP[Code named FLASH_ERASEmadeflashablebyBANNED.zip ] it works with twrp2.5 to flash_erase needed partitions. However not tested fully. Problem? Post here.
Other long procedures:
Cute prince recovery procedure:
http://forum.xda-developers.com/showthread.php?p=36868966
I think Cute prince missed this .Just add this at the end
Code:
./flash_erase -N /dev/mtd/mtd3 0 0
7.1 I GET FLASH ERASE NOT FOUND?
Flash the flash_erasemadeflashablebyBANNED.zip
Derefas recovery procedure:
derefas was the one who actually gave the idea of recovering nand
http://forum.xda-developers.com/showthread.php?p=36867557
Sachin Thomas recovery procedure
Developed lately *can be done on phone itself */if it didn't involve recovery /*
http://forum.xda-developers.com/showthread.php?p=38941897
Recovery recoveriNG procedure (bhargz16)
http://forum.xda-developers.com/showthread.php?p=39198068
8. I can't find my answer here?
Go to official burnt nand discussion thread
http://forum.xda-developers.com/showthread.php?t=2183130
Or you can ask your questions here.
9.can I Flash any other kernel to prevent overclocking?
You can Flash garuda2.6
Link in latest links post page 1.
http://forum.xda-developers.com/showthread.php?p=38098567
Side effects:
http://forum.xda-developers.com/showthread.php?p=39452607
10. Some more links:
Unknown recovery procedure
http://forum.xda-developers.com/showthread.php?p=36836090
MTD status report:
http://forum.xda-developers.com/showthread.php?p=36837173
11. Cannot go to recovery /burnt recovery /unable to flash recovery?
Not sure of the exact command,but will work.
Use
Code:
fastboot boot recovery /sdcard/twrp5.img
or
Code:
fastboot boot recovery.img
or
Code:
fastboot boot /sdcard/twrp5.img
You need twrp5.img or recovery.img present in /SDcard and renamed like that itself.
After booting into recovery, you can do everything you please. ~flash erase format and install new Rom and boot the device [do ruu here, if you haven't been able to enter hboot before]
After booting up the device, flash erase mtd1 through terminal emulator.and then flash a suitable small recovery. And then pledge here that you'll never overclock ever again.
12. GPU OC ?
gpu oc has been reverted along with CPU oc by sak for burnt nand. But may be added later. but not present in cm released on or two months before 9 may13.
12.1 is it safe?
I don't know. CPU oc did provide burnt nand and bad blocks. Gpu oc may also do some things, which may not be seen as of now. I've seen one case complaining that, after using Cyanogen and going back to stock - games started lagging, which did not lag, when he was in stock before. The reliability is doubtful. But not much people go back to stock either -so not much can be said.
12.2 do you recommend it?
"If any provider of any oc removes the "AS IS" tag and take responsibility,if something happens, then I'll probably may use that oc,otherwise count me out".
12.3 How to remove gpu oc ?
Its present in kernel. Flash another kernel. Or modify source and compile yourself.
Present at arch/arm/mach-msm/msm7x27a.c- kernel source.
Try here
Normal [bus, Gpu] is [0,133330000],[160000000,192000000],[200000000,245760000] I think.
13. Was there anyone unable to recover and lost thier device for ever?
AFAIK,
"The lost thier device for ever list RIP "
Ghostking
Hawk378
And May be many more
Legend *:
Attachment list:
***********************************************************VERY IMPORTANT : UNDER CLOCK BELOW 300MHZ ,IF YOU ARE USING ZIPS WHILE SYSTEM IS RUNNING.AFTER THE TESTS, YOU MAY OVER CLOCK AS YOU WISH. ********************************************************************************************
Provided "AS IS"
1- script to detect badblocks by banned.
2-flashable zip to detect badblocks by btfb0
3-Terminal method to detect bad blocks by banned .
4-flashable zip to detect bad blocks by banned.
5- Recovery procedure to delete bad blocks- Made flashable by BANNED.
All zips posted here has readme.txt files inside it-which are self explanatory to that particular zip.
*USE AT YOUR OWN RISK*
Re: [faq][newbies only][mini edition]
I have a question not answered here?
Post your question in the q&a section after making sure that your question hasn't already been asked.
Please use search button on the top right to make sure that your question hasn't already been asked. And it'll help you to find more answers.
Follow detailed instructions here
http://forum.xda-developers.com/showthread.php?p=33608527
And post with logcat increases your chances of resolving the problem
ADB
What is logcat and ADB?
Special thanks to akshat.shenoy
http://forum.xda-developers.com/showthread.php?p=37805872
He'll explain things better
Basics of ADB:
http://forum.xda-developers.com/showthread.php?p=9936674
Partition and wipe SD ext with ADB:
http://forum.xda-developers.com/showthread.php?p=38706881
Re: [faq][newbies only][mini edition]
reserved
Re: [faq][newbies only][mini edition]
MINI Tips and tricks:▶?
1.How can I apply cm9/10 themes?
http://forum.xda-developers.com/showthread.php?p=35530897
Download the zip from here, read instructions there and flash it in recovery
Now you can use any HDPI themes on your Pico
Thanks ngoloralph
2. How do I change fonts?
Download Rom toolbox lite and go to font installer;
A. If you're on stock, the rest is automatic
B.if you're on cyanogen 9/10/11,if you change the droid sans /others as recommended by app, you'll end up in boot loop (possibly because of symlinking of robot sans & droid sans )
In such a case go to preferences and click to overwrite only roboto regular font and everything will be fine.
Take a look
Uploaded with ImageShack.us
3. How do I add a new language support to my device?
Note: no new language gui can be added by this method. This only adds support. Instead of seeing boxes, you may see your language. If you want full language support, you can go to this abandoned thread.?? http://forum.xda-developers.com/showthread.php?p=40890599 ??
Language support can simply be added by adding a Android supported language font file in /system /fonts and give it permissions rw r. r.(font files can be found all over xda )
Step 2. Open system /etc /fallbackfonts.xml...
There should be a lot of font file names there.. just delete a font name that you don't want and add your font file name (the name of the file which you put in /system /fonts)
In there.
Practice makes perfect.
This method however doesn't work /only partly works for complex languages /script like Hindi Arabic etc.
DID YOU KNOW?
1. Long pressing reboot button (in the menu after pressing power key) will get you into safe mode
2. Long pressing power keys and volume keys + and- for more than 30 seconds will reboot your device (tk to hrkh83)
3. Repeatedly pressing certain options(like Android version) in the about menu in settings(on cyanogen ) will take you into different settings (tk liverpoolfan)
Go back to main ^|^
Battery drain
BATTERY DRAIN
Of course, we're gonna talk about drain.
Before we start, I want to disprove some prevalent concepts
1. Battery calibration
It is supposed to increase Battery capacity and increase Battery life and it makes your phone to show the correct Battery on the notification bar.
FALSE
It doesn't do any of those. Calibration is just deleting Batterystats.bin file. That file holds info about how many seconds each apps were running for.typically it's blameometer. It shows the information you see in the battery chart in your settings. Nothing more.
Source: article
2. Cycling your battery life from 0 to 100 and 100 to 0 will typically increase Battery life. Further more you should make sure it comes to zero by turning on the phone,every time it got switched off on it's own.
FALSE AGAIN
Nothing could destroy your Li-On Battery than extreme low voltage. You can be sure that this will destroy your battery life more than anything. During storage it's recommended to keep the battery in cool place with 40%Battery.
So, don't use any battery draining app from market.
Ok, since we took out the false foundation, it's time to put some true working tips to save your battery during usage and it's overall life
1. It's recommended to charge as often as possible ~every time you get a socket. Though not to keep @100 all the time. Overcharging theoretically may damage your battery, but your phone comes with various safety mechanisms to prevent charging after that.
2. Limit the number of apps. Definitely would produce good Battery.
3. Limit the number of apps, that run in background all the time.
Typical example would be facebook.
PERFORMANCE:
4.Disable autostarts for all apps, that you don't use much~using autostart manager.
Disabling autostarts for the clock app will make you get up late. Use common sense.
This alone should drastically improve your performance
5.Use lightweight launchers ~Nova.
Go (any go products) is not advisable
6.Post ICS, Disable media scanner receiver.
You can use elixir app to disable media scanner receiver. This will scan your SDcard over and over again resulting in Battery drain,which is significant, if you use a bigger SD. Use media scanner root to enable and disable.
As far as the usual ones,
7. Disable autobrightness
8. Keep screen @ minimum brightness
9. Disable autorotation
10. Disable location services.
GAPPS:
11. Disable GSF (google services framework ) receivers ~the ones with gtalk on it.
12. Disable auto sync
You can use timedo /timer Android to turn on sync twice /thrice daily.
13. Reduce number of accounts. Better to keep single than three accounts.
14. Good internet connection. Amount of energy taken to re connect is supposed to be far more than amount needed to keep a connection.
15. Undervolt/with underclock
RECOMMENDED APPS:
1.BETTER BATTERY STATS ~free for xda.
2. Onepower guard
I haven't found satisfying results with this app, but still try it out
3.greenIFY
I haven't used this @ all.
4. Any app, that is used to reduce /increase heartbeat sent to google servers.
Well, that's all I've learnt as of now.
Re: [faq][newbies only][mini edition]
Recommended apps section (only free)
Top apps
0. Superuser by koush (Clockworkmod)
1. Titanium backup
2. Efficient backup
3. Floating logcat ~logcat extreme
4. Catlog
5. Aroma file manager (recovery use only)
6 .Es file explorer
6.1 es file explorer v2
7. Yaffs file manager
8. App extractor
8.1 nandroid manager
9. Loaderdroid
10. Xda app
11. Elixir (much useful to disable app components than it's actual use)
12. Android pro widgets(similar to HTC friendstream)
13. Nova launcher
14. Timedo
15. Live logcat lite
16. Rom toolbox lite
17. Screen stand by root(turn off screen without making phone to sleep)
18. Disk Usage
Launcher:
1. Nova
2. Apex
Downloaders:
Loaderdroid
Multimedia players:
Video
mx
bs
qq
Audio
Ttpod
Equalizers
NOOZOXIDE REWIRE PRO
Walkman sound enhancements
Awesome beats
Cyanogen Dsp(better than stock )
Equalizer from market.
Cam/corDer /video recorder:
Camera:
Camera 360
ucam
spycam
Video recorder
ucam
Zoom camera
Camera magix
Browsers:
Fast and server based
Uc browser mini
Opera mini
Opera mobile
uc browser
Puffin browser
Full fledged browsers
Firefox
Dolphin
Google chrome beta
Chrome
KEYBOARDS ?
Touchpal keyboard
mĺ has internet permisn wid emoji
Office apps:
Kingsoft office(better than paid apps)
Zip extractors:
Zarchiver(ant-one)
Screen off(w/wake lock):
Screen stand-by
File managers:
ES explorer
Fx file explorer
Call recorders:
No known call recorders are working.
Stocks:
Personal finance
Superuser:
Superuser by koush ~open source&free
Super su ~made pro free after the release of prior~closed source ~
⇧Go back to main ♠
THE END.
© All rights reserved 2013?
Autoramdisk exchange alpha
MINI ADVANCED SECTION:
KERNEL RAMDISK exchange on Android itself:wip
AUTORAMDISK™ EXCHANGE PROJECT alpha™
『Moved by touch™』Inc.
In association with
Google Nose beta™
Presents
AUTORAMDISK™ EXCHANGE PROJECT alpha™
Current version: 0.0.0.0.071 Alpha
Created with Es explorer 1.6
Created on HTC explorer Pico a310e
Update:
I have got it to work and complete
http://forum.xda-developers.com/showthread.php?p=40035607
Old post: too lazy to delete
Present condition:
Hi. I cannot get it to work on HTC Pico yet .It may work on other phones. If someone can, please feel free to complete it provided you give proper credits And you do not make money out of this.
What's this?
It's a procedure (wip) to Flash any kernel without the need to change ramdisk.
As new kernel gets released, you don't need to change ramdisk to suit your Rom.
Automated procedure:
Open any kernel.zip with any zip extractor on your phone
Copy the script below and paste it in updater-script present in meta~inf/com/google/Android
(delete any other things written there. )
Code:
package_extract_dir("bin","/tmp");
set_perm(0, 0, 0755, "/tmp/busybox");
set_perm(0, 0, 0755, "/tmp/unpack-bootimg");
set_perm(0, 0, 0755, "/tmp/mkbootimg");
set_perm(0, 0, 0755, "/tmp/dump_image");
run_program("/sbin/dump_image","boot","/tmp/oldboot.img");
run_program("/tmp/unpack-bootimg", "-i","/tmp/oldboot.img","-o","/tmp");
package_extract_file("boot.img", "/tmp/boot.img");
run_program("/tmp/busybox", "mkdir","/tmp/boot");
run_program("/tmp/unpack-bootimg", "-i","/tmp/boot.img","-o","/tmp/boot");
run_program("/tmp/busybox", "rm","-r","/tmp/kernel");
run_program("/tmp/busybox", "mv","/tmp/boot/kernel","/tmp/kernel");
run_program("/tmp/mkbootimg", "--ramdisk","/tmp/ramdisk.cpio.gz","--kernel","/tmp/kernel","-o","/tmp/newboot.img");
write_raw_image("/tmp/newboot.img", "boot");
delete_recursive("/tmp/newboot.img", "/tmp/boot", "/tmp/oldboot.img", "/tmp/kernel", "/tmp/ramdisk.cpio.gz","/tmp/boot.img", "/tmp/busybox", "/tmp/unpack-bootimg", "/tmp/mkbootimg");
mount("yaffs2", "MTD", "system", "/system");
package_extract_dir("system", "/system");
Download zip files from the source link below
Extract it and copy the bin folder from there to your kernel folder directly.
There should be 3 folders in your kernel folder ~bin folder, meta inf folder, system folder and boot.img
Now compress it and Flash
Note that this is only applicable to change ramdisk. If the boot. Img needs more work than that, it won't work. Essentially, it won't work on sense4 compiled kernels and vice versa
Manual terminal emulator method:
Alright guys, one last tutorial from me making my last mark here .This tutorial is not tested fully and probably never will be due to lack of time. And it will work for sure ~but May have syntax errors.
Credits:
1.trevd for arm executable binaries.
2.Xda university.
Requirements:
1.Any Android 2.3+ rooted
2.Android terminal emulator
3.arm executable unpack-bootimg binary and mkbootimg binaries (find it below )
History:
I wanted to change ramdisk for kernels for a long time on phone itself ~probably for a year or more . But anyone who tried to unpack using normal unzip apps would've noticed that other data.img and even system.img in clockworkmod could be unpacked easily, but not the boot.img and recovery.img. When I searched to unpack, it was easy with computers using the unpackbootimg binary for Linux. Problem was it wasn't cross compatible with our phones . So, I was searching for quite a while,until I found trev on xda university and he had made arm executable binaries for unpacking, repacking. Actually the main reason these binaries were created was for far greater and more advanced purposes i.e. to use apply patch functions in update binary and update script to Flash ramdisk on phone without flashing the kernel itself or vice versa (AFAIK)[ The apply patch functions are used in normal ota updates for any Android phone ]. Anyway I took those binaries to unpack kernels on our phone to change ramdisk. I write this for those, who want to change ramdisk on thier phone, but had no experience in PC whatsoever. And also by doing this, I share the unpack boot image binaries by trevd for Android phone ,so that any advanced member May use it for kernel updater scripts~think about it ~one zip for all cm9/10/10.1. Ofcourse the rest is up to you. Thanks for reading
Procedure:
1.Download the zip given in source below
2.Unpack it
3.Find these two binaries in /system/bin
Unpack-bootimg and mkbootimg
4.Copy them to /system/bin and give them full execute permissions in es explorer and read/write permission for user.
5.For easy remembrance,say, b1.img is your original boot image for your Rom(and Android,say cm10 ) and b2.img is the new kernel released for cm10.1
6.You want to change the ramdisk ofb2 cm10.1 to cm10 ,so that you can Flash the new kernelb2 for your cm10
7.Create new folder in SDcard named boot and put both b1.img and b2.img there
8.Open terminal.
9.type the following code one by one
Code:
su
cd /sdcard/boot
mkdir /sdcard/boot/b1
mkdir /sdcard/boot/b2
unpack-bootimg -i /sdcard/boot/b1.img -o /sdcard/boot/b1
unpack-bootimg -i /sdcard/boot/b2.img -o /sdcard/boot/b2
rm /sdcard/boot/b2/ramdisk.cpio.gz
mv /sdcard/boot/b1/ramdisk.cpio.gz /sdcard/boot/b2/ramdisk.cpio.gz
mkbootimg --kernel /sdcard/boot/b2/kernel.img --ramdisk /sdcard/boot/b2/ramdisk.cpio.gz --base 12C00000 -o /sdcard/b2new.img
rm -r /sdcard/boot
Note: the last rm command will delete all your old kernels ~don't execute it, if you don't want to have it deleted.
10.Now you have new kernel boot image with your ramdisk in /sdcard/b2new.img
11.Put it back in the zip with it's modules and
12. Flash
13.Hoping it'll work.
14.That's the end.
Source and binaries here:
http://forum.xda-developers.com/showthread.php?p=36931024
For dream and Sapphire models, you can use the binaries created by koush ~ which is found in his github ~any kernel project.
I'll probably be leaving soon
Kind of feel like working for xda. I guess sak and others would probably feel like it later. It's been great while it lasted. So this is probably my last project. If I did have some extra hardware during this period, things May have been different. It's good, while it lasted.
"The fantasy of a dream is that, it's still a dream, when it becomes reality, then it's no more a dream and the fantasy is lost. "
「Good bye xda」
So long:angel:
Re: [faq][newbies only][mini edition]
one more
The Infamous BUILD.PROP Tweaks :
http://www.jeffmixon.com/examining-build-prop-tweaks-for-android-ics-a-comprehensive-guide-part-1/
from
http://www.droidforums.net/forum/droid-4-roms/234899-examining-build-prop-tweaks.html
Guess that'll end this hoax for good.
One thing that was useful for me was this
http://www.modaco.com/topic/347274-guide-making-cm-utilise-both-cache-and-data-for-dalvik-cache/
Ladies and Gentlemen I present to you the
kn0x0ut Toolbox v2.30!
(complete, with knox 0x0 reference! hehe)
This script/toolbox allows you to install custom roms, and mods that you would normally have to flash with custom recovery.
(aroma installer and other magic like that gets ignored, but the aroma mods can usually be installed manually on a second run)
On top of that it allows you to create and restore backups of your system and data partition. (for "online" restore without needing custom recovery).
As we (hopefully) all know, if you want to keep knox warranty void at 0x0 you cannot use a custom recovery or kernel....
But let me start with a few words of warning:
Dont do anything obviously stupid...there are no safe-wheels for most commands.
(for example: dont "clean-base" or use "rom-install" without actually installing a new rom or you will most likely end up without system apps and device not booting correctly - like you wouldnt wipe system in a custom recovery without installing a rom...).
It can be used over adb or terminal, but if you install a rom the system ui gets stopped, so better do it over adb!
kn0x0ut toolbox is 100% safe for your device - no hardbrick or efs clear possible by using it!
The worst thing that can happen when using the kn0x0ut toolbox is that you have to factory reset or flash again with odin, so keep the odin file close. (at best this is a custom made RDLV odin.tar.md5 you used to upgrade your rom version with - or for people who have to use other methods because of the new bootloader - keep the last odin file close you used to upgrade also.. and the root method that worked for you)
This whole thing "programmed" on/for a N9005 but in theory it should work for all samsung devices - including the other knox enabled devices and even on many other devices. (but it might need some adjustments, so be careful and have a way to restore your stock rom before you try anything fancy with other devices)
If your knox warranty is already void aka 0x1 then you can still use the toolbox and its mods (some could actually be useful to anyone..) but it won't bring back the warranty.
I didn't really create this thing for me actually - I already did the all steps the toolbox can do by hand with adb terminal on my device (and perfected my method with lots of trial and error..), but I wanted you guys to also be able to enjoy custom roms while keeping your knox warranty intact and show samsung a big FU for putting us through this BS in the first place...
If you like the toolbox and appreciate the work I put into this please consider buying me a beer or hitting the thanks button at least.
---
This kn0x0ut toolbox itself requires root access (if you want to be able to install mods and files you need to be able to mount system writable)!
You will have to use "Root de la vega" or some other method to get rooted while keeping your warranty intact.
IF YOU GET "PERMISSIONS DENIED" ERRORS, PLEASE TRY THE FOLLOWING COMMANDS TO REMOUNT YOUR SYSTEM WRITABLE:
(please try them all, and report back in the thread which one works, and which fail or get permission denied)
Code:
mount -o rw,remount /system
mount -o rw,remount /dev/block/platform/msm_sdcc.1/by-name/system /system
mount -o rw,remount /dev/block/mmcblk0p23 /system
---
How to use:
Extract the download from below to the root of your internal or external sd card.
The script will try to detect the folder first on the external and then on the internal sd.
(/mnt/extSdCard/kn0x0ut or /sdcard/kn0x0ut)
Then browse into that directory with terminal or adb shell and type:
Code:
sh kn0x0ut.sh
and you will get all the commands supported currently.
---
You can then use the command
Code:
sh kn0x0ut.sh kn0x0ut
to install the script to your system's xbin folder and create a symlink to "/system/xbin/knoxout" as well.
(if you want to upgrade kn0x0ut from an older version, make sure you delete all the duplicate old files from the kn0x0ut folder - basically everything but the "processed" and the backup folders if you have them, and replace them with the files from the latest versions download. Then re-run the "sh kn0x0ut.sh kn0x0ut" command to update the kn0x0ut script in your system/xbin folder as well)
From then on you can just type
Code:
kn0x0ut <command>
or even easier:
Code:
knoxout <commands>
The script will automatically detect the kn0x0ut folder on the external or internal sd. (external has higher priority if both present)
To install a zip file meant to be flashed in CWM, you put in into the "put_files_folder". You can put zip, tar, tar.gz or already extracted files and folders into there.
---
To actually work, the files/folders must be in a certain stucture. The script expects already extracted files which get placed into the put_files_here folder to be in the structure like they would appear on the device.
Think of the "put_files_here" folder as the root folder - files get placed on the system in the same structure as if the put_files_folder was the rootfs "/". So if you got a subfolder system/app inside the put_files_here folder, the files inside it will get pushed to /system/app... Hope this makes any sense, else someone else pls try to explain it better.
(NOTE: The script will only install files, it wont do additional magic if there is any contained inside the zip like aroma installer - its mainly meant to speed up the process of installing mods and/roms that require system files to be replaced. (and some things might need to be done by hand, if you want enhanced functionalities from aroma installer)
If you have a zip that does not fully install, check out if there are any scripts inside etc. - and also check the "not_installed" folder which gets created after each installation.
If you want to install a rom, make sure you are on the same base version as the rom you are trying to install. So if you want to flash rom "xyz" based on MK2 then you gotta have stock, but rooted MK2 installed (with odin and RDLV for example). If you want to mix versions, you can try - but I can't tell if that actually works or causes problems - I just would skip the BS and make sure you got the right base rom installed with odin before tying to install a custom rom with kn0x0ut...
---
See 2nd post for current command list.
See 3rd post for current list of available mods.
See 4th post for more detailed command explanation.
See 5th post for download.
Code:
>>> commands <<<
Help:
-----
help - Display help
listmods - Display a list of all available mods
Backup:
-------
backup-base - Backup system app and framework files
backup-efs - Backup efs partition
backup-system - Backup system partition
backup-data - Backup data partition
backup-full - Backup system and data partition
Installation / Restore:
-----------------------
install - Install contents of "put_files_here"
(place backup tar's there for restore)
For System Restore use "rom-install"!
For Data Restore run "clean-data" then "install"!
rom-install - As above but clean system apps, framework
and dalvik-cache before
Mod Installation:
-----------------
mod=[mods] - Install specified mods (for multiple seperate with ',')
Special:
--------
supersu - Install supersu v1.80 to xbin (incl. init.d support for all kernels)
busybox - Install busybox v1.21.1 to xbin (incl. symlink-redirect)
kn0x0ut - Install kn0x0ut v2.30 to xbin
fix_perm - Install fix_permissions v2.10 to xbin
backup_perm - Install backup_permissions v2.00 to xbin
Cleaning:
-----------------------
clean-dalvik - Clean dalvik-cache
clean-base - Clean system apps and framework (MAKE SURE YOU INSTALL NEW BEFORE REBOOT!)
clean-data - Clean data partition to restore from backup (leaves sdcard content alone)
Bloatware Removal:
------------------
removebloat-cooolboy - Remove most bloatware (based on CoOoL_BoY's bloatware remove script)
removebloat-zroice - Remove bloatware hardcore mode (beware - most google stuff gone except playstore)
>>> commands END <<<
Code:
>>> available mods <<<
Mod: acid
Description: ACID Audio Engine v5 (optimised for samsung)
Mod: acid_awesomebeats
Description: ACID Audio Engine AddOn - Awesome Beats
Mod: acid_noozxoide
Description: ACID Audio Engine AddOn - Noozxoide
Mod: aosp_browser
Description: AOSP Browser (with Google, Startpage & Startpage Mobile)
Mod: aosp_clock
Description: AOSP Clock (deinstall ClockPackage.apk if you want to use this)
Mod: bash
Description: BASH Shell
Mod: busybox
Description: busybox v1.21.1 (busybox.net) + special default symlink fixes
Mod: chronus
Description: Chronus Clock Widget
Mod: forcelte
Description: Init.d script to force lte on
Mod: onandroid
Description: onandroid script v9.20 + necessary binaries (mkyaffs2image, dedupe)
Mod: onandroid_n9005
Description: onandroid partition layout for N9005
Mod: openvpn
Description: openvpn binary v2.1.1 (statically linked, no libs necessary)
Mod: sqlite3
Description: sqlite3 binary + libs and init.d script to optimise db's at boot
Mod: zipalign
Description: zipalign binary + init.d script to run at boot (fixed to make it work!)
>>> available mods END <<<
Add ons and commands explained in detail:
1.) Fix permissions script is running after all the commands to ensure permissions are correct. You can also install the fix_permissions script as standalone command. (see command list)
2.) To install a rom or other cwm zip file put it into the "put_files_here" folder and run "install" or "rom-install" depending on what you want to do. You can also use this to restore system and data partition backups made by kn0x0ut or onandroid (those have to be in tar or tar.gz format).
3.) The busybox which gets installed is directly from busybox.net and has more commands than the "normal" busybox floating around from stericson.
Additionally if you use the "busybox" command some symlinks will get redirected from toolbox to busybox and give enhanced functions.
(for exampe: mv, cp, rmdir, rm, ...)
4.) "sqlite3" and "zipalign" will also install an init.d script so that they are running on system boot to optimize the dbs and/or zipalign the apks.
--- more to come ---
Current Version: v2.30
### Downloads ###
Please do link to this thread if you want to use the kn0x0ut toolbox for other projects.
(do not distribute kn0x0ut download links but instead link to this thread, not only for credits, but so people can report bugs etc in one place)
READ THE INSTRUCTIONS AND TRY TO REMOUNT YOUR SYSTEM WRITABLE BEFORE YOU TRY TO INSTALL A ROM! AND ONLY DO THAT OVER ADB SHELL!!!
>>> YOU HAVE TO RUN KN0X0UT AND ALL ITS COMMANDS AS ROOT USER IN TERMINAL OR OVER ADB SHELL. TO MAKE THE SHELL ROOT YOU HAVE TO TYPE "SU" AND THEN ENTER BEFORE USING ANY OF THE OTHER COMMANDS! <<<
kn0x0ut_2.31.zip - 14.84 MB
Do not run rom-install if any of the other commands fails, and please try them first. (at least busybox and supersu installation)
reserved
reserved
So if I already have Knox at 0x1 am I screwed?
Sent from my SM-N900TA running HyperDrive 3 using Tapatalk 2
harosxcomp170 said:
So if I already have Knox at 0x1 am I screwed?
Sent from my SM-N900TA running HyperDrive 3 using Tapatalk 2
Click to expand...
Click to collapse
well then this thing has no use to you, other than the addons and installing stuff on a running system instead of using custom recovery.
But it wont fix the knox warranty no. It just KEEPS it from getting tripped by allowing installs without custom recovery.
Now say if I odined back to completely stock with no root. Will that bring my Knox back to 0x0? Or has the damage already been done?
Sent from my SM-N900TA running HyperDrive 3 using Tapatalk 2
harosxcomp170 said:
Now say if I odined back to completely stock with no root. Will that bring my Knox back to 0x0? Or has the damage already been done?
Sent from my SM-N900TA running HyperDrive 3 using Tapatalk 2
Click to expand...
Click to collapse
sorry to say, but gtfo with these questions inside this thread! knox 0x1 stays knox 0x1 - so far nothing gonna bring it back - ssheeesh this you should really know man. one lil google search gives you 100 threads about just that! (completely offtopic to this tool also... sorry but is this xda or android central?!)
Yea sorry about that I didn't know if there was a break through or something I bought my phone off swappa with knox already voided.
Sent from my SM-N900TA running HyperDrive 3 using Tapatalk 2
harosxcomp170 said:
Yea sorry about that I didn't know if there was a break through or something I bought my phone off swappa with knox already voided.
Sent from my SM-N900TA running HyperDrive 3 using Tapatalk 2
Click to expand...
Click to collapse
well tbh, I wouldn't worry so much about it, I'm strongly considering to trip my flag to have custom kernel and recovery. This toolbox here can't fully replace it. But maybe we find a way to make our own signed kernels and/or recovieries or some other way around this knox warranty void bs.
My phone is still new and for such an expensive piece I rather don't risk anything before it's clear there are no bugs out or smth people dont yet know about (I mean with the hardware, not with my toolbox or smth). Plus its fun to try out whats possible.. (i learned so much about android and the shell by doin all this... good exercise hehe)
So until then I'll keep my warranty intact - and beside overclocking and some kernel tweaks and maybe easy nandroid backups/restore we can do quite alot.
---
@ the others with their flags still intact: Why so shy? Any success stories so far? This would get more attention if someone would confirm it working other than me hehe =). You all pushed me to make a script now use it! (try X-note for the start or smth .. thats what I'm using and it worked fine)
Cf root will trip the KnoX.
But samsung accepts one time warranty even if u tripped it.
This is my 3rd note, in 3 executive years. Ive never needed warranty. The golden rule with Samsung phones is if it works (hardware), it will stay to work for years. Just like German Mercedes from the '80s and '90 s.
Greetsz
Sent from my SM-N9005 using Tapatalk
but it's impossible to use your program without root? it's right. my phone it's already in rom MJ7, so, no soluce now to root without tripping the knox to 0x1..
Will i need to run scrtips once?
or before install more rom.
Will this wipe my phone? Dont wanna loose my data
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
no it wont wipe data partition.
If you just use the "install" command it wont wipe anything, just copy over and overwrite the files that exist.
If you use the "new_rom" command it will wipe the system apps and the framework before installing.
If you come from odexed and want to install deodexed version you must use the "new_rom" command or else you will have odex files and some incompatible system apps left.
---
I'm also working on a way to backup and restore system as well as data.
What I really would like to know is what happens if you create an odin image from your system partition and flash that back with odin or mobileodin. It would just "restore" the system to the state where you created the image, but the question is if that would trip knox or not.
To be honest I doubt it would, since we only install a system image back that was already "ok" for knox - you already got the custom system partition flag when one uses RDLV or somehow else attains root access because the system is not unmodified, so this wouldnt change anything.
The only problem with my thinking would be if odin / mobileodin implements a special check thats only triggered when you flash through it and which will then trigger the knox flag if it finds a custom image.
If you find any stories of people who just flashed a (custom) system image through odin or mobileodin please point me there. So this question can finally be answered fully.
If we could just flash system images with odin while leaving out kernel and recovery and keeping knox, this would make custom recovery obsolete kind of. The only thing we still couldnt do then would be to use custom kernel features. So please help me to find out!
Yeah
So will new rom erase
game saves
Sms
Installed apps
Settings?
Okay if i find such thread ill post or pm it to you
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
It shouldnt, although you might end up with other problems.. not 100% sure to be honest. (I only installed on freshly wiped device so far, or wiped afterwards etc, just to make sure)
Best thing to do is backup everything with titanium and then give it a try - but make sure you backup stuff to your external SD or copy it over to the pc, because the internal sd will get wiped if you have to factory reset. (just do a backup of everything with titanium and then copy the contents of your internal SD card (everything - to include game saves etc) to your pc.
If end up having to factory reset because of bugs from the old data you can just restore the apps with titanium and have your internal sd contents backed up.
---
If you give it a try (if you have the titanium backup and the internal sd contents you can always restore the old state at least) please report if you had to wipe data or if everything runs fine?
When I tested things around I did this already and the data stayed - but i did not test all the apps to really make sure.. so theres a small chance for problems - but I actually doubt it.