Database Info

[MOD] Project Direct Inject (v3.2.6) (CPU Tuner*RNGD*Speed) (2.3.3 - 4.2.2)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PROJECT DIRECT INJECT
Exit_Only said:
Welcome to the world of direct injection, Its been unavailable for your android smartphone...UNTIL NOW. This tweak package takes your android device to a whole new level of awesomeness by direct injecting high octane scripts into your turbocharged engine.
This is a collection of scripts from multiple developers repacked into one package. Big thanks to all the developers involved.
Click to expand...
Click to collapse
This mode is incompatible with some devices\firmwares or create various system problems! Make a nandroid backup before installing.
General Q & A Section:
Q.) How can I tell if this is actually working or not?
A.) Open Terminal Emulator and type this command...
Code:
su
directinject
Q.) How can I see if rambooster work properly?
A.) Open Terminal Emulator and type this command.
Code:
su
rambooster
Q.) How cand I see if entropy working properly?
A.) Open Terminal Emulator and type this command...
Code:
su
entro
Q.) How can activate RNGD and entro binaries?
A.) Open Terminal Emulator and type this command...
Code:
su
entropy
Q.) How do I turn on entropy?
A.) Open Terminal Emulator and type this command...
Code:
su
entropy_on
Q.) How can I stop entropy?
A.) Open Terminal Emulator and type this command...
Code:
su
entropy_off
Q.) How do I uninstall it?
A.) Download the uninstall, you put on your card and then flash the file.
Code:
su
uninstall
reboot
Q.) Can I use DirectInject and Crossbreeder?
A.) Yes, you can.In the first time disable entropy (on DirectInject) then install Crossbreeder.
Q.) How do I install NOS Control?
A.) NOS Control installs like any .apk
Q.) How can I get CPU Tuner on my device?
A.) Open Terminal Emulator and type this command...
Code:
su
cputuner
GENERAL WARNING: Do NOT I repeat DO NOT use ANY other tweaks with this package. There are only two approved scripts that are compatible with this, Seeder Entropy and Cross breeder. If you choose to do so after reading this you do so AT YOUR OWN RISK. If you ask bout other tweaks in my thread YOU WILL BE IGNORED.
WHAT IS NEEDED TO INSTALL Project Direct Inject:
1.) Root access (su binary required)
2.) Busybox v1.20.4+ w/ run-part support (busybox required)
3.) Need to be on 2.3.3+ gingerbread or higher
4.) Terminal Emulator app app installed
5.) Enough space in your /system partition (10 mb available minimum)
If you do not meet these requirements then DO NOT USE IT!!!
WHAT IS NEEDED FOR CPU TUNER:
1.) Need a fully unsecured boot.img (Look inside "default.prop", if it says "ro.secure=0" then your kernel meets this requirement, if it says "ro.secure=1" then cputuner WILL NOT work!!!)
2.) Your need a kernel that supports max overclock freq of 1.3ghz and a min freq of 384mhz.
3.) Need a kernel that has these 3 governors (Conservative, Ondemand, and Performance)
4.) On HTC Sense ROMs you need to disable per flock (Setcpu will do this for you)
If you don't meet ALL these requirements then do NOT attempt to use CPU tuner!!!
Installation
1.) Make sure you meet the requirements above
2.) Download the latest version of Project Direct Inject
3.) Boot into recovery (TWRP or CWM doesn't matter)
4.) Make a nandroid backup
5.) Flash inside cwm recovery
6.) Reboot
7.) Press thanks button me and Exit_Only
APK Direct Inject Control
What i need to install this app:
Terminal Emulator
Project Direct Inject
Direct Inject is an application that gathers in one place all orders of Project Direct Inject
Ryuinferno said:
Behold.....
THE NOS Controller!!! Since many of you find it troublesome to key in commands every time, I wrote up a damn simple app to save those finger punches!!! Well, I am currently limited by my knowledge of Java, this is the best I can do for now (Requests? Be prepared, I won't attend to any as I can't add more features yet...more learning to do...sorry... )
But, take note that you will need to install the latest version of 4cyl Turbo v0.5.7_r2 w/ 250 shot NOS first and have Terminal Emulator installed before using this app! Do not be silly and think that this app is gonna do everything for you!
The app is very simple and straightforward, so no instructions will be given here...enjoy!
Click to expand...
Click to collapse
Download Direct Inject Control: Click Here
About the Tweaks:
8 init.d scripts total (11 init.d scripts if you opt for NOS Entropy, zRAM, and Int2Ext)
Zipalign /data & /system apps on each boot ( With detailed Logging of Activities)
Calibrates Battery automatically (make sure your battery is at 100% before flashing)
NOS Entropy with Light, Moderate, and Aggressive Governors (Optional during install, Moderate is default governor)
Ext4 Tweaks
Zero UI Lag
Maxed out speed & Performance
Disables most logging activities
GPS enhancements (USA/CANADA/MEXICO/ALASKA Only)
Sqlite3 for Jellybean (Complied from CM10.1 Source)
4.2.2 Binaries (Better app processing, Complied from CM10.1 Source)
Disables logcats
Get your Privacy back (No internet redirects)
Lots of kernel tweaks (Disabled most kernel sleeps and Adjusted Linux values)
Extended Reboot Commands
VM heap tweaks
Net speed tweaks
Ext4 Perfect Remount
Outstanding battery life
Sqlite3 Reindexed and Vacuumed (If you see errors in db files please ignore, this is normal operation)
RAM booster and Media Server Killer binary (Very Aggressive RAM Recovery tool)
4Cyl Turbo Binary (Exit_Only Exclusive)
Stable relase:
Download v.3.2.6: Click here
Code:
Fixed the three remaining bugs in v3.2.5_t9 and removed the touchscreen tweak as it was causing screen issues on some devices!!!
Download v3.2.4: Click Here
Code:
v3.2.4 - Fixed ALL bootloops on ALL devices
Added seperate flashable zips for Sqlite3 Binaries in SECOND POST BELOW OP
Removed Max Freq mod in CPU Tuner
Removed needed interactive Gov and now using Ondemand Gov
Updater script now backups and restores CronMOD int2ext scripts by default
Updater script now backups and restores CM init.d scripts for Selinux and Userinit
Fixed ALL remaining bugs
Added new entropy scripts for on & off Functions
Updater no longer removes Crossbreeder during install process
Added Sqlite3 Database Optimizer Script (YOU NEED TO FLASH THE REQUIRED SQLITE BINARY IN THE SECOND POST BELOW THE OP)
Fixed Deepsleep script to work correctly without errors
Much more im sure I am forgetting!!!
Download v3.2.2: Click here
Code:
v3.2.2 - Fixed All Boot Looping issues on ALL DEVICEs
Fixed Bootlooping on HTC Sense Devices
Removed Zipalign on boot script and binary
Added BRAND NEW Cpu Tuner script and binary
Pick between three different profiles (Battery, Performance, or Balanced)
Fixed Battery drain on single core devices
Adjusted Minfree values to be more aggressive
Fixed Assert Error from test releases
Read Ahead set to 3072kb
Updated Logging engine
Plenty more I am forgetting!!!
Download v3.2.1: Click here
Code:
Lots of upgrades to cputuner with new CPU core log engine
Added brand new move dalvik script
Much more coming later!!!
Download v.3.0.0: Click here
Code:
v3.0.0: Started over with complete rebuild
Must lighter and much faster
Installs correct busybox to /xbin
Only 2 binaries now 'directinject' & 'rambooster'
Updated rambooster + added init.d script to run ram booster every 45 minutes
Auto runs zipalign every 2 days or 48 hours
Patched rngd binary for better entropy generation without killing battery life
Adjusted Linux values
Brand new interval script
Brand new iptable rebuild script
Much much more!!!
Download v.1.0.2: Click here
Code:
v1.0.2: Fixed image issue
Added newest code to entire project
Added new functions to sqlite scripts
Added new warnings during install
Download v.1.0.0: Click Here
Code:
v.1.0.0. A new world, a new script
[B]FIRST RELEASE OF PROJECT DIRECT INJECT[/B]
Download v0.7.0: Click here
Code:
v0.7.0: Added new and improved DNS caching (Similar to crossbreeder)
New init.d script that automatically activities DNS caching
Added new DNS tweaks for build.prop
My new custom 'dnshelp' binary that will help you use dnsmasq binary
Modified rambooster (Two custom options 'Moderate' & 'Aggressive')
Fixed Adj minfree script to work right
Much much more I am forgetting
Download v0.6.0: Click here
Code:
vo.6.0. Adjusted sysctl values
Made sysctl tweaks optional
Updated 4cylturbo binary to include optional install pieces
Updated install.sh with new code and new backups
Added bash and nano binaries along with bash, nano, & terminfo folders for /etc (Two diff versions)
Added sqlite3 and script (Two diff versions)
Fixed bash and nano not working correctly
Updated uninstall.sh to restore more stock items and delete more stuff
Adjusted hedge values
Added in optimized RAM tweaks (much better ram management vs v0.5.7-r2)
Fixed multiple script errors and adjusted values
Full zip size is much bigger (7.03mb)
Other stuff I'm sure I am forgetting. THIS IS A MAJOR UPDATE.
Download v0.5.7r2: Click here
Code:
v0.5.7r2 Adjust sysctl.conf correctly this time
Removed disable vsync
Removed cron (These newer versions of busybox don't support "ENABLE_CRON" so script is useless)
Fixed logging on scripts
Adjusted vm values slightly
Download v0.5.7r1: Click Here
Code:
v0.5.7r1 - Added extended reboot scripts
Fixed root issues
Fixed greenify issues
Updated install script
Added uninstall script (This will remove nos 100% from your device)
Updated directions inside zip file
Removed some sysctl commits
New performance boosters added
Download v0.5.6: Click her
Code:
v0.5.6: - Reverted back some scripts
Removed Fix Permissions script
Fixed up install.sh script (Thanks Poo)
Fixed root issues on Samsung Galaxy S Advance
Download v0.5.5: Click here
Code:
This version should solve problems with freezes and root loss.
Download v0.5.4_r1: Click here
Code:
v0.5.4_r1: - Fixed random reboots some people were having (myself included)
Made more stuff optional during install
Fixed root access issue some users experience (I never had this issue so I need feedback)
Updated ad blocker
Updated logging engine
Much smoother and zero lag
Download v0.5.4: Click here
Code:
v0.5.4: - THIS IS ONLY EXECUTIBLE VIA TERMINAL EMULATOR OR SCRIPT MANAGER.
THIS IS NOT NOT NOT RECOVERY FLASHABLE
Added init.d script to add init.d support if your ROM/Kernel does not support it already (Optional during Terminal install)
RAMBooster Binary is now much more Aggressive at clearing RAM
Updated 4Cylturbo binary with code changes
Fixed ALL Logs and Script Errors
NOS Entropy Governor is moderate by default instead of light
Removed All Code Errors from Sysctl Config
Added 'S' to beginning of all scripts to support Samsung Galaxy S 1 Owners (You guys are so old skool :P )
Added int2ext script (Thanks to Cronicory for original)(WARNING: YOU MAY HAVE TO FORMAT YOUR SD CARD TO USE THIS SCRIPT. YOU CAN OPT OUT OF THIS DURING INSTALL)
Logcat disabling script is now 100% Optional during install (YOU CAN NOW KEEP LOGCATS ACTIVE)
Added Bash and Nano Shell Binaries (COMES IN HANDY FOR BASH SHELL SCRIPTS LIKE CRON)
Download v0.5.2: Click here
Code:
v0.5.2: - THIS IS NOW A FLASHABLE ZIP AGAIN
Fixed /data logs for scripts
Fixed most script errors
Adjusted a few things here and there
More to come later
Download v.0.5.1: Clcik here
Code:
v0.5.1: - Fixed logging errors
Fixed ALL install.sh errors
Added Team Kernelizers build.prop injector script (Thanks RErick & Decialman)
Build.prop injector is now a option in install.sh
Added auto reboot to install.sh (SOME DEVICES WILL NOT ALLOW THIS TO WORK, SOME WILL HAVE TO REBOOT MANUALLY)
Fixed all init.d script errors
Updated 4cyl turbo engine logger
Added new directions to README_users.txt
Will add more as I remember it
KNOWN ISSUES & BUGS:
1.) WiFi tethering DOES NOT work when using this tweak package!!! There is no solution to this problem and I am not trying to find a solution, sorry for the inconvenience!!!
CURRENT WORKARUND: Flash the newest crossbreeder!!! This will fix your borked tethering!!!
Uninstal
Code:
su
uninstall
reboot
Standard Disclaimer: Flash at your own risk. Myself nor XDA is responsible for any damage this thing may cause you.
For this wonderful work we must thank Exit_Only
Original thread: Click here

enricogrim said:
Hi,
I have an old version of NOS, before installing a newer version it's better I uninstall the old one or install the new one directly?
thank you very much
Click to expand...
Click to collapse
You can just install the new one (through recovery or terminal depending on the release version) since the installer replaces it's own old/invalid files
Sent from my GT-I9070 using xda premium

enricogrim said:
Hi,
I have an old version of NOS, before installing a newer version it's better I uninstall the old one or install the new one directly?
thank you very much
Click to expand...
Click to collapse
Exactly what he said. 4cyl turbo has implemented a script that deletes all files init.d that you have and replaces them. For a new installation, whether it is installed by CWM or Terminal is not required before uninstallation, just install the new version.

Did what u said...follwed every step..said yes to every promt...still after rebooting when i type su 4cylturbo or rambooster..it says doesnot exist..where did i go wrong...
PS I'M A USER!!
Sent from my GT-I9070 using xda app-developers app

kanidevil666 said:
Did what u said...follwed every step..said yes to every promt...still after rebooting when i type su 4cylturbo or rambooster..it says doesnot exist..where did i go wrong...
PS I'M A USER!!
View attachment 1959685
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
this mean don't install this mod correct
just try again and put the folder install on SDCARD or SDCARD0

kanidevil666 said:
Did what u said...follwed every step..said yes to every promt...still after rebooting when i type su 4cylturbo or rambooster..it says doesnot exist..where did i go wrong...
PS I'M A USER!!
View attachment 1959685
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Try v0.5.2 instead since it's flashable and see if it works.
Flash it in TWRP/CWM and I suggest you mount system first before flashing the zip. Also, as always don't forget your nandroid backup If it did work, then you can proceed to install the latest version through terminal if you want to.

Damn mounting/unmounting always confuses me...By mounting the system do u mean mount or unmount..
Coz i think in cwm it shows like this
"A Blue Tick and it shows unmount storage...and a blank box when its shows mount storage"
So just tell which 1 should i go with, tick or untick
And after flashing it, will the terminal command "4cylturbo" respond??
Sent from my GT-I9070 using xda app-developers app

kanidevil666 said:
Did what u said...follwed every step..said yes to every promt...still after rebooting when i type su 4cylturbo or rambooster..it says doesnot exist..where did i go wrong...
PS I'M A USER!!
View attachment 1959685
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
For v0.5.4 follow these instructions
Code:
1.) DOWNLOAD NEWEST VERSION, IF YOU WANT TO USE NOS ENTROPY THEN PLEASE REMOVE SEEDER OR CROSSBREEDER FIRST, YOU CAN FIND THE NEEDED UNINSTALL SCRIPTS IN SEEDERS OR CROSSBREEDERS THREAD. USE XDA SEARCH TO FIND IT.
2.) DOWNLOAD TERMINAL EMULATOR APP FROM GOOGLE PLAY STORE... (IF YOU ALREADY HAVE IT THEN SKIP THIS STEP)
3.) EXTRACT "install" FOLDER FROM /sdcard FOLDER INSIDE ZIP AND PUT IT ON YOUR ACTUAL "/sdcard"...
4.) EXIT OUT OF WHAT EVER FILE EXPLORER YOU ARE USING...
5.) OPEN THE TERMINAL EMULATOR APPLICATION...
6.) TYPE THIS COMMAND IN TERMINAL EMULATOR...
[B]
su
sh /sdcard/install/install.sh
^
There is a space here!!![/B]
FOLLOW THE PROMPTS AND CHOOSE WHAT YOU WANT INSTALLED!!!
7.) REBOOT YOUR DEVICE FOR ALL MODS TO TAKE AFFECT... (Rebooting is a REQUIREMENT, Failure to reboot WILL cause random app force closings)
8.) ENJOY THE SPEED AND PERFORMANCE :D

This script hangs phone and creates problem in phone UI
Sent from my GT-I9070 using xda app-developers app

ramansehra said:
This script hangs phone and creates problem in phone UI
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
What ROM and what version of 4cyl you use?

Very good, Great job
Enviado desde mi GT-I9070 usando Tapatalk 2

I'm currently using LightJB 1.2 with co core 6.0.
. 0.4.2 version of 4cylturbo works good with me, but this version hangs my phone to black screen while using.
Sent from my GT-I9070 using xda app-developers app

kanidevil666 said:
Did what u said...follwed every step..said yes to every promt...still after rebooting when i type su 4cylturbo or rambooster..it says doesnot exist..where did i go wrong...
PS I'M A USER!!
View attachment 1959685
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Have you updated your busybox?
Sent from my GT-I9070 using xda app-developers app

v5.2
not able to flash through recovery method

Bhaji eh recovery naal ni hona,
Tuhanu terminal emulator te jake command type karni paini aa
Sent from my GT-I9070 using xda app-developers app

sarabjit singh said:
not able to flash through recovery method
Click to expand...
Click to collapse
The file is named 'NOT FLASHABLE'.You have to install it via terminal emulator.
Sent from my GT-I9070 using xda premium

flash
ramansehra said:
Bhaji eh recovery naal ni hona,
Tuhanu terminal emulator te jake command type karni paini aa
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
v0.5.2: - THIS IS NOW A FLASHABLE ZIP AGAIN
read 1st page carefully
---------- Post added at 06:57 PM ---------- Previous post was at 06:53 PM ----------
rushilkr said:
The file is named 'NOT FLASHABLE'.You have to install it via terminal emulator.
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
v0.5.2: - THIS IS NOW A FLASHABLE ZIP AGAIN
IF USING FLASHABLE VERSION Find the flash able zip file on your sdcard then flash it.
7.) Boot out of recovery [ONLY FOR FLASHABLE VERSION]
read 1st page carefully

sarabjit singh said:
v0.5.2: - THIS IS NOW A FLASHABLE ZIP AGAIN
read 1st page carefully
---------- Post added at 06:57 PM ---------- Previous post was at 06:53 PM ----------
v0.5.2: - THIS IS NOW A FLASHABLE ZIP AGAIN
IF USING FLASHABLE VERSION Find the flash able zip file on your sdcard then flash it.
7.) Boot out of recovery [ONLY FOR FLASHABLE VERSION]
read 1st page carefully
Click to expand...
Click to collapse
Read the title of this thread.Its about v 0.5.4 .It is NOT flashable.
Sent from my GT-I9070 using xda premium

Datico said:
Very good, Great job
Enviado desde mi GT-I9070 usando Tapatalk 2
Click to expand...
Click to collapse
ramansehra said:
I'm currently using LightJB 1.2 with co core 6.0.
. 0.4.2 version of 4cylturbo works good with me, but this version hangs my phone to black screen while using.
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
I had the same problem too. A new version came out, hopefully all issues resolved. Check OP!
sarabjit singh said:
not able to flash through recovery method
Click to expand...
Click to collapse
Only version v0.5.2 is with flash method.
Flash method:
Code:
1.) Make sure you meet the requirements above
2.) Download the version of NOS FLASH
3.) Boot into recovery (TWRP or CWM doesn't matter)
4.) Make a nandroid backup
5.) Find the flashable zip file on your sdcard then flash it.
6.) Boot out of recovery
To me it worked without problems.

0.5.2
Grady22 said:
I had the same problem too. A new version came out, hopefully all issues resolved. Check OP!
Only version v0.5.2 is with flash method.
Flash method:
Code:
1.) Make sure you meet the requirements above
2.) Download the version of NOS FLASH
3.) Boot into recovery (TWRP or CWM doesn't matter)
4.) Make a nandroid backup
5.) Find the flashable zip file on your sdcard then flash it.
6.) Boot out of recovery
To me it worked without problems.
Click to expand...
Click to collapse
i tried 0.5.2v dude but not succeed

[TOOL] M-A INSTALLER | Install ZIPs WITHOUT a Recovery !!!!!

M-A Installer clones recovery enviroment on android enviroment . It allows us to install zip update packages directly in android without rebooting in cwm/twrp/... !! M-A Installer does not convert scripts for installing package , It installs zip directly into device so Its compatable with all flashable zips all over the world ( At the moment aroma series are not compatible with M-A Installer becuase Android system over rides frame buffer while surface flinger trys to redraw screen on new inputs or refresh events , so I 'm waiting for a fix from Aroma to add aroma binary support to M-A Tools )
Click to expand...
Click to collapse
DO NOT WASTE YOUR TIME FOR REBOOTING IN RECOVERY
♥ USE M-A INSTALLER INSTEAD ♥
FIRST REAL ZIP PACKAGES INSTALLER​
Warning !
YOU ARE USING THIS AT YOUR OWN RISK ! I AM NOT RESPONSIBLE !!
DO NOT TRY TO INSTALL ROMS OR PACKAGES CHANGING SYSTEM BECAUSE YOU CAN NOT CUT DOWN A TREE WHILE YOU ARE AT THE TOP OF IT !!
Requirements
- Busybox
- ARMv7 ( + NEON ) - [ May not work on ARMv6 !!! ]
- Root Permissions
How to install
- Download last version
- Extract contents in /system/bin/
- Set permissions of all files which you have extracted to "rwxr-xr-x" ( 755 )
How to use
- Open terminal and type :
Code:
su
inzip path/to/zip
- Write path to zip file you want to flash instead of path/to/zip
Downloads
version 1.0 | ARMv7 ( + NEON ) Support
CREDIT
M0RT3Z4
Aramullz ( aka Ahmad Amrullah )
Koush and All devs contributed in CWM project

How can we will wipe data, cache ?

naag.qc said:
How can we will wipe data, cache ?
Click to expand...
Click to collapse
on terminal type:
su
rm /data/ dalvik-cache /*
rm /cache/ dalvik-cache /*

Nice.
Maybe you should add examples what can be flashed this way.

ZordanKV said:
Nice.
Maybe you should add examples what can be flashed this way.
Click to expand...
Click to collapse
all kernels , recoveries , mods , tweaks , engines , maybe gapp and a lot more . only remember you can not install roms and anything else which wipes system or framwork

alireza7991 said:
all kernels , recoveries , mods , tweaks , engines , maybe gapp and a lot more . only remember you can not install roms and anything else which wipes system or framwork
Click to expand...
Click to collapse
yes, but don't you need a reboot when flash a kernel a mod or some init.d tweak?

ktulu84 said:
yes, but don't you need a reboot when flash a kernel a mod or some init.d tweak?
Click to expand...
Click to collapse
M-A Installer : install zip -> reboot system
CWM : reboot recovery -> install zip -> reboot system
as you can see reboot recovery is removed using m-a installer so about 2-3 min time is saved
Also it maybe fix "annoying setup wizard" bug ( I did'nt test )

alireza7991 said:
M-A Installer : install zip -> reboot system
CWM : reboot recovery -> install zip -> reboot system
as you can see reboot recovery is removed using m-a installer so about 2-3 min time is saved
Also it maybe fix "annoying setup wizard" bug ( I did'nt test )
Click to expand...
Click to collapse
May be the reboot to recovery will give you a saving of 30 seconds... But only the trouble to use terminal, typing the commands and write correctly the path... I think you lost the saving of reboot to recovery... That's my thinking.
Inviato dal mio GT-I9001 usando Tapatalk 4

smeroni68 said:
May be the reboot to recovery will give you a saving of 30 seconds... But only the trouble to use terminal, typing the commands and write correctly the path... I think you lost the saving of reboot to recovery... That's my thinking.
Inviato dal mio GT-I9001 usando Tapatalk 4
Click to expand...
Click to collapse
oh dealing with hardware keys on ADC Team CWM to find and choose update package is to time consuming comparing to writing 1/2 small lines on terminal + you do not need to reboot on all zip packages ! some packages applys directly after installing .
You are not forced to use this tool ! Leave this topic clean if you do'nt like this

alireza7991 said:
oh dealing with hardware keys on ADC Team CWM to find and choose update package is to time consuming comparing to writing 1/2 small lines on terminal + you do not need to reboot on all zip packages ! some packages applys directly after installing .
You are not forced to use this tool ! Leave this topic clean if you do'nt like this
Click to expand...
Click to collapse
I never write this tool is not good, but if you compare a procedure that need a reboot, I think it is not so time saving... And if you use TWRP instead of CWM... There is no comparison...
Inviato dal mio GT-I9001 usando Tapatalk 4

smeroni68 said:
I never write this tool is not good, but if you compare a procedure that need a reboot, I think it is not so time saving... And if you use TWRP instead of CWM... There is no comparison...
Inviato dal mio GT-I9001 usando Tapatalk 4
Click to expand...
Click to collapse
Even if using twrp you need some times for going in menu and finding update packages and installing it and ....

maybe you can write a ui that scans which files are on sd and you can choose between it^^ additional to your terminal function. we had to choose directly

I just saw this while on the xda app, but don't you think that could also be in the android development section
Reason being that I saw something like this a while ago there by androguide.fr the pimp my rom guy. It was called flash Gordon or something.
Still this is pretty cool.
Sent from my HTC Glacier using xda app-developers app

smeroni68 said:
(...) I think it is not so time saving...(...)
Click to expand...
Click to collapse
I agree with smeroni68 that the method using TWRP/CWM is pure and simple, because it is running in an environment in which they operate limited processes.
In the case of alireza7991, the Android operating system can be started the process of supervising other processes can lead to conflicts.
This method is useful for the advanced user.
You can make it easier to run scripts, for example, by means of SManager.
alireza7991's method is a very interesting option, but the system is larger by two files: ub [224244 B] and m-a_core [4001 B].
These files files can be potentially dangerous to the system. Any process can find it and can use it.
.
I will repeat: alireza7991 method is useful for advanced users.
.

HeathenMan said:
maybe you can write a ui that scans which files are on sd and you can choose between it^^ additional to your terminal function. we had to choose directly
Click to expand...
Click to collapse
At least on my SD it will crash because I have more than 40000 zip files

you can make a button "scroll down" to show only a limit of x files per 'site'

HeathenMan said:
you can make a button "scroll down" to show only a limit of x files per 'site'
Click to expand...
Click to collapse
I have to write a GUI
But there are few people using this project so I am reluctant to write +100000 codes for GUI

im sure MANY people would like to use it with a gui, like every other (new) released it'll became big after some awesome things are included

N_otori0us_ said:
I just saw this while on the xda app, but don't you think that could also be in the android development section
Reason being that I saw something like this a while ago there by androguide.fr the pimp my rom guy. It was called flash Gordon or something.
Still this is pretty cool.
Sent from my HTC Glacier using xda app-developers app
Click to expand...
Click to collapse
Flash Gordon converts edify scripts to shell then it runs them so it can not be used for all zips but M-A installer does flash process exactly same as the one is done in Recovery !!

Please reupload, link is down
Inviato dal mio Nexus 4 con Tapatalk 2

[alert] for all scripts claiming they are supercharged

NOTIFICATION! FOR ALL SCRIPTS CLAIMING THEY SUPERCHARGE YOUR SYSTEM (OR INSTALL SUPERCHARGER v6)​​​​NOTE: Don't be confused in difference between Performance SuperCharge or SuperCharger v6 (Here its, SuperCharger v6)
There is no script (until now) in this world that can SuperCharge a system from recovery.
The thing is:
It seems that the problem with ICS, at least according to the dev, is that the OS no longer reads ADJ values out of build.prop but rather has them stored and hardcoded in services.jar, which makes this script only be half as useful as it was before. The dev has provided a nifty way to actually change these values in services.jar, and it can be done from the comfort of your Android device, thanks to a web app created to “patch” the services.jar so that the script can take effect in full force.
Click to expand...
Click to collapse
Here is proper installation steps:
===================================================================
Installation - Easy as 1, 2, 3!
1. Run the NEWEST V6 SuperCharger script as always.
Note: You may get Segmentation Fault errors running the V6 SuperCharger script on ICS due to a flakey su (superuser) binary.
To resolve the issue, you can:
A) Go HERE for a fixed su binary. No more fugly segfaults! - Thanks to wraithdu
OR...
B) Go HERE and get the SuperCharger Starter Kit!
2. Patch and install services.jar - by whichever method you like best. Your options are, in order of EFFECTIVENESS:
Note: Options A, B and C require Java to be installed on your computer - Click to Verify Java Installation
Option A) Use one of the -=Ultimatic Jar Patcher Tools=- (exe or zip) which DO EVERYTHING for you "Fully Ultimatically" on DEODEX & ODEX ROMS!
Goto Step 3 if you did this!
Option B below is the next preferred method - but there's manual work involved.
Option B) Follow the complete tutorial below and use -=Ultimate Jar Power Tools=- patcher script to automate Step 5 - the actual smali editing!
There are actually 56 edits performed via script... many more than what is specified in the tutorial!
Note that the script allows you to choose the level of your Launcher's Super Strength! (BulletProof, Die-Hard, or Hard To Kill)
Also be sure to have the necessary smali files in the same folder as the script!
ODEX ROMS - ALL Stock ROMS are ODEX (I think... ) So if you have a services.odex file, press the button!
All but Step 5 is automated on Windows with a batch script courtesy of rexstor .
See [Guide][Batch][Odex Rom only!] To get another 50% v6 Supercharged script for ICS!
So you'd run the batch script, and for the editing, run my Ultimate Jar Power Tools patcher script in Step 5
Goto Step 3 if you did this!
Option C) Follow the complete tutorial below without using any Patcher tool.
This is actually pointless to do - there are less edits and it's more work And the laziest people should just do D) below lol
Goto Step 3 if you did this!
Option D) Use the latest Update 9 RC* and select ICS Service Centre's Automatic Transmission! (OUT OF DATE)
Seemless webapp integration and installation to "Lock home in Memory"
Note: This is currently out of date - latest edits and Maximum MultiTasking Mods are NOT included and it does not work on Jelly Bean!
Goto Step 3 if you did this!
Option E) ICS OOM Priority Charger webapp. Same effectiveness as D) but done manually (OUT OF DATE)
Latest Update 9 RC* can install and apply permissions via ICS Service Centre's manual mode
Important: The webapp WON'T WORK for ODEX roms! So if you have a services.odex file, you have use a more effective option above
Also won't work on Jelly Bean ROMS!
More Webapp Info
Just go to http://android.mimic.ca with your devices browser and follow instructions!
In case of upload problems: If your Android browser closes while selecting file to upload, use Opera Mini web browser because it lets you select a file from within the app. Just copy services.jar to the sdcard first
CWM zip option is available!
But if you don't get the CWM zip, and instead download the modded services.jar, you can:
A) Do Steps 8 to 10 below! But first In Terminal Emulator, just type su and enter, busybox mount -o remount,rw /system and enter (Mount system as read/write).
OR...
B) Use the ICS Service Centre's manual mode in V6U9RC*
Help for webapp: Go to http://webchat.freenode.net , channel #v6_supercharger and talk to blk_jack (or me if I'm there)
* All roms (odex & deodex) - to install a patched services.jar/odex, you can use the ICS Service Centre's manual mode in V6U9RC9+ (for Steps 8 and 9 below).
* If you ever have trouble applying permissions to services.jar/odex, just run the ICS Service Centre and permissions gets applied everytime just before returning to the main menu!
3. SuperClean & ReStart! (ie. Wipe Dalvik Cache & Reboot)
Notes: For decent launcher detection use at least V6U9 RC6.9 or newer and check the bOOM Stick to see if the launcher the desired ADJ value!
.......... - Boot will take a LONG time as it "optimizes all your apps"
.......... - If it doesn't boot (unlikely if you did the edits yourself), try wiping caches (not data)
.......... - If it still doesn't boot, you can always just re-flash your current untouched rom but do have a backup nevertheless.
.......... - If you get FCs, fixing permissions will solve that. (Use the "Fix Emissions" Option in the latest V6 SuperCharger Script! )
That's It!
========================================================
​
Go here for more info!​​

Reserved

Umm why repost the thread when we can just check the page

Yes, and there is a tutorial too in the general forum

thread moved and closed

[SCRIPT][MOD] FPS boost + Flag tuner

Hello XDA fellows,
Today I'm going to share with you some awesome stuffs that will improve FPS on your device and Flag Tuner wich will make it smooth as butter. This will also increase you battery life and no one should miss this!
-It works on any rom
-It's stable
-Saves battery
-Boost performance
-General disclamer-
XDA and I are NOT responsible if anything wrong happens to your device by using this mod. Always make sure you have a backup ready if needed.
1:
Flag tuner is a script that removes any multitasking restrictions set by oems, such as samsung, sony, htc & lg.
-on my galaxy core duos running touchwiz it showed noticeable improvements in touch latency, eg touch home button and you go home faster. (i tested it on few other launchers and it shows a drastic diference)
-this also saves some battery as well as improving performance
Click to expand...
Click to collapse
Installation:
1. download script from attachments (right click > save link as)
2. rename to flag_tuner and copy to internal storage of device
3. from device copy to /system/xbin and set all permissions to yes (you can use Root Explorer or ESF wich is free)
4. open terminal emulator and type: su -c flag_tuner
5. follow scripts instructions
6. reboot and then enjoy!
Download HERE
2:
***Increase FPS***
Here is a very simple mod that I wanted to share. This is what has been labeled in the past as the build property to remove a FPS cap on all android devices. This doesn't actually do that but you will see an increase in frames per second by adjusting the EGL swap interval.
Click to expand...
Click to collapse
-requirements-
Must be rooted with recovery
Have init.d support (kernel)
Instalation:
1. Download HERE
2. Flash in recovery.
3. Reboot.
Here is a modded Google Play services with less wakelocks. (will improve your battery life)
Download HERE
To install, flash the zip in recovery
Click to expand...
Click to collapse
-It works on any rom
Credits:
-razz1
-DiamondBond
-you and me

[Init.d Script] [2k16-07-05 New Scripts] Init.d Support for G FLEX 2 [All-Variant]

Init.d Script Support
CONFIRMED WORKING!! (POST YOUR FEEDBACK BELOW!)
Credits to @bountyman334
He is the reason this script is possible and also check out his G Flex 2 Flashable Mods.
I only made a shell script to bring this to you all.
check it out Flashable Mods for G flex 2
Code:
[CENTER][B][U][SIZE="4"]WARNING![/SIZE][/U][/B]
[SIZE="3"]I am not responsible for brick devices.
Shell Script at your own risk.
And have a backup of system img at your internal storage!![/SIZE][/CENTER]
Instruction :​
[*]Extact the zip and copy the .sh file to internal storage
[*]Open android terminal app / adb shell
[*]grant superuser 'su' first
[*]Navigate to SDcard
[*]Type in :
Code:
su
cd /sdcard
sh gflex2-init.sh
[*]Follow the screen instructions
[*]Reboot then check for init_test.log in internal storage
[*]Delete the init_test.log on boot and reboot again
[*]If init_test.log shows up
return "it is working"
else
Run the script again from terminal emulator and check last two steps
[*]You must have init.d support now
GUIDE TO USE INIT.D SCRIPTS
--> There is a folder named init.d in /system/etc/
--> You can create scripts that you want to run at boot.
--> Scripts need not have ' .sh ' extension.
--> Copy scripts to this folder via root explorer.
--> Set permission of file to rwx-rwx-rwx : 777 and reboot to see your script working
--> Scripts can be made in 3rd-party apps like Kernel Auditor (Recommended), 3C-ToolBox(android tuner).
--> Kernel Auditor has init.d section where you can modify existing script but don't know about creating new.
--> In 3C-Toolbox we can set init.d instead of on boot .. this app is useful if you want to limit CPU frequencies etc.
--> You can Zipalign, Optimize apps, Run temp/cache cleaners, Tweak Cpu and Governor, etc.
also check the below link for creating and using init.d scripts
Take a good read at here about init.d​
Few tweaks
View attachment powerTweaks.zip Derived from OnePlus 2 SD810 Tweaks (Reported to increase SOT and performance significantly)
KCAL can be applied to run on every boot so that COLOR tones are applied immediately
New tweaks (2016-07-05)
Giving me less heat .. 0 throttle .. more SOT (4+ on normal usage)
--> 91fixoverlays - set GPU for Screen Composition (Less CPU Loads) : credits to : titanic_fanatic
--> part_fstrim - trims the partitions (Optimization)
--> sysctlTweak - Swappiness 0 + some minor change
--> tweak_cpu - Under Clocks 0-3 at 1.4GHz & 4-7 at 1.85GHz (also remove thermal config file not the default one for better result)
--> Entropy increase
--> Refer to post 18 for changes!!
Copy paste anyone you like !! tweak_cpu and fixOverlay recommended on Stock/rooted/init.d
​
Do thank us :laugh::laugh:
Uploaded on:
2016/06/15
Updated on:
2016/07/05​_

Will do!

Thanks for your work,
Unfortunately it isn't working for me.
Edit: i did something wrong. Trying again
Edit: Nope. Still getting this:
#Init.d Support for LG G flex 2 [all Variants]
#Script by : adds08 [Thats me]
#Init.d port by @bountyman334
#
#Init.d script extracted from @bountyman334 's
gflex2-init.sh[224]: no closing quote
1|[email protected]:/storage/emulated/0 #

michele955 said:
Thanks for your work,
Unfortunately it isn't working for me.
I tried with terminal emulator, root explorer and script manager.
Getting this:
#Init.d Support for LG G flex 2 [all Variants]
#Script by : adds08 [Thats me]
#Init.d port by @bountyman334
#
#Init.d script extracted from @bountyman334 's
storage/emulated/0/gflex2-init.sh[224]: no closing quote
1|[email protected]:/ #
Click to expand...
Click to collapse
Try the new fixed script and do confirm
need su and busybox properly installed inorder to work !!
cheers :good:

Fixed script works properly.
Init.d is working !!! Hurrayy !!!
Thanks

michele955 said:
Fixed script works properly.
Init.d is working !!! Hurrayy !!!
Thanks
Click to expand...
Click to collapse
I checked with Universal init.d app init.d support and it says kernel doesn't have init.d support. What does it mean? Script works or not?

michele955 said:
I checked with Universal init.d app init.d support and it says kernel doesn't have init.d support. What does it mean? Script works or not?
Click to expand...
Click to collapse
Delete test_init.log file and reboot the device.. If you see the file again then init.d is working ... Don't worry about the universal init.d app ..
Use kernel auditor to put some init.d !!!

Deleted and rebooted. There is no new log.

adds08 said:
Delete test_init.log file and reboot the device.. If you see the file again then init.d is working ... Don't worry about the universal init.d app ..
Use kernel auditor to put some init.d !!!
Click to expand...
Click to collapse
hi, how to Use kernel auditor to put some init.d??

I ll fix it and post some tweaks and tutorial later when i get home...
But it is strange why it worked for the first time and later did not.. I'll look into it later ...

michele955 said:
Deleted and rebooted. There is no new log.
Click to expand...
Click to collapse
maybe re run the script via terminal
after reboot look at the log file
then delete that log file and reboot
UniversalInit app will show no init.d support no matter what!
But it is there and working ...
i am also posting sd810 related init.d tweaks and scripts later on along with how to use them and where to place them..

adds08 said:
maybe re run the script via terminal
after reboot look at the log file
then delete that log file and reboot
UniversalInit app will show no init.d support no matter what!
But it is there and working ...
i am also posting sd810 related init.d tweaks and scripts later on along with how to use them and where to place them..
Click to expand...
Click to collapse
Stange thing happened.
I reapplied the scrip as you said and got this:
Execution : Process - 4
Initd must have already been running!!!
Or some error has occurred!!
Let's wait and watch! Termination : Process - 4
Press enter to continue....
After reboot log file was successfully created.
I deleted log file and rebooted several times and now it appears at every boot. Guess it's working now

adds08 said:
Init.d Script Support
CONFIRMED WORKING!!
Credits to @bountyman334
He is the reason this script is possible and also check out his G Flex 2 Flashable Mods.
I only made a shell script to bring this to you all.
check it out Flashable Mods for G flex 2
Code:
[CENTER][B][U][SIZE="4"]WARNING![/SIZE][/U][/B]
[SIZE="3"]I am not responsible for brick devices.
Shell Script at your own risk.
And have a backup of system img at your internal storage!![/SIZE][/CENTER]
Instruction :​
[*]Extact the zip and copy the .sh file to internal storage
[*]Open android terminal app / adb shell
[*]grant superuser 'su' first
[*]Navigate to SDcard
[*]Type in :
Code:
sh gflex2-init.sh
[*]Follow the screen instructions
[*]Reboot then check for init_test.log in internal storage
[*]Delete the init_test.log on boot and reboot again
[*]If init_test.log shows up
return "it is working"
else
Run the script again from terminal emulator and check last two steps
[*]You must have init.d support now
GUIDE TO USE INIT.D SCRIPTS
--> There is a folder named init.d in /system/etc/
--> You can create scripts that you want to run at boot.
--> Scripts need not have ' .sh ' extension.
--> Copy scripts to this folder via root explorer.
--> Set permission of file to rwx-rwx-rwx : 777 and reboot to see your script working
--> Scripts can be made in 3rd-party apps like Kernel Auditor (Recommended), 3C-ToolBox(android tuner).
--> Kernel Auditor has init.d section where you can modify existing script but don't know about creating new.
--> In 3C-Toolbox we can set init.d instead of on boot .. this app is useful if you want to limit CPU frequencies etc.
--> You can Zipalign, Optimize apps, Run temp/cache cleaners, Tweak Cpu and Governor, etc.
also check the below link for creating and using init.d scripts
Take a good read at here about init.d​
Few tweaks
View attachment 3784960 Derived from OnePlus 2 SD810 Tweaks (Reported to increase SOT and performance significantly)
KCAL can be applied to run on every boot so that COLOR tones are applied immediately​
Do thank us :laugh::laugh:
Uploaded on:
2016/06/15
Updated on:
2016/06/16​_
Click to expand...
Click to collapse
Hi, just copy powerTweaks.sh to init.d folder and set permission, right?

edwardsiow said:
Hi, just copy powerTweaks.sh to init.d folder and set permission, right?
Click to expand...
Click to collapse
Yes.
Extract the zip and copy the file with no extension over to init.d folder and set permission..

Have you had more sot with the power tweaks?
Thanks for letting me know about it

adds08 said:
Yes.
Extract the zip and copy the file with no extension over to init.d folder and set permission..
Click to expand...
Click to collapse
The OP2 folks has 4hrs SOT to 6-7 hrs SOT increase.. For me however it did seem to give 1/2 to 1hr more in normal usage but so.etimes seem like a placebo.
It may work for some i guess.
I had 3hrs before and after this with normal usage i did manage 4+ hrs max once..
Sent from my LG-H950 using XDA-Developers mobile app

adds08 said:
The OP2 folks has 4hrs SOT to 6-7 hrs SOT increase.. For me however it did seem to give 1/2 to 1hr more in normal usage but so.etimes seem like a placebo.
It may work for some i guess.
I had 3hrs before and after this with normal usage i did manage 4+ hrs max once..
Sent from my LG-H950 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks for the honesty.
I can't do anything to break that four hour sot

After applying new scripts
deleting thermal-engine.config (not thermal-engine-default) file.. (backup recommended).
After few reboots and benchmark and letting battery discharge and recharge full ..
Good results !!
:angel:

Can you tell me why this wouldn't load on startup?

soosoolhastam said:
Can you tell me why this wouldn't load on startup?
Click to expand...
Click to collapse
when i loaded it
it is working for me except there is a missing 'Y' .
the msm_thermal enabled parameter is missing ..
is the init.d script working in yours? check if it is working or not / rerun the my script..
did you set the permission 777 ?
also the post in your thread .. i am really sorry but i just wanted some credit to my research too (you can implement them aagain cuz they do significantly increase SOT)
if you want to , could you also implement your gov_tweaks via init.d (safer)..