[Q] How to Flash Radios when on the New ICS Firmware ? - HTC Sensation

Hi all,
I am on Android Revolution HD ICS V6.0.2 .
I have flashed the new ICS firmware as everyone else did, and as you know it doesnt allow you to use Fastboot commands in command prompt and ETC to flash radios.
So i was wondering, How can i flash radios such as the one recommended in the ARHD thread with the new firmware?
Thanks FOR YOU HELP

I think the new firmware has it in it but I'm not sure ask on his thread, the reason I think this is cause I did the radio suggested first then the firmware upgrade and my radio stayed the same after the firmware,,,, again tho wait for a second opinion I just got this phone switched from a LG p500
Sent from my HTC Sensation 4g with Beats Audio

You can flash Radio's but not through "Fastboot" commands. Flash them through Hboot in the same way you flashed the firmware (i.e. get the radio in PG58IMG.zip put it in the root of your SD card & power on your phone with the vol down pressed).

Thanks very much for your help mate.

omar302 said:
You can flash Radio's but not through "Fastboot" commands. Flash them through Hboot in the same way you flashed the firmware (i.e. get the radio in PG58IMG.zip put it in the root of your SD card & power on your phone with the vol down pressed).
Click to expand...
Click to collapse
I tried what you told me, I downloaded the radio recommended by Mike for the Android Revolution HD ICS rom , put the Radio IMG file in the Zip called PMG...... , However the bootloader doesnt recognize it.

That's not how you flash it you open up the zip read the instructions
Sent from my HTC Sensation 4g with Beats Audio

mahdibassam said:
I tried what you told me, I downloaded the radio recommended by Mike for the Android Revolution HD ICS rom , put the Radio IMG file in the Zip called PMG...... , However the bootloader doesnt recognize it.
Click to expand...
Click to collapse
If you get a Radio from the Radio thread, then it is ready and just put in your SD Card & flash. Don't use the file from ARHD.

Related

[Fix] bootloops fix and 3.32 update

ok i got litle bit from all over no clue who posted it dont care just telling you how i fix my phone
i tried to get 3.24-3.32 firmware on it and wouldnt go ketp boot looping
or any problems your having installing O.T.A update
i was asked why host files on 3rd party cuz i got sick of none working ones i know the ones i got posted work
Firstly - you HAVE to be running 1.50.401.1 to use this OTA file. and 1.17 firmware If you're on ANY other build it wont work
firmware can be found here for 1.17
http://forum.xda-developers.com/showthread.php?t=1459767
You also have to be 100% stock (e.g. NOT rooted). If you are running a custom ROM you HAVE to use the http://www.4shared.com/file/risaQet4/RUU_Pyramid_HTC_Europe_1454012.htm RUU to get back to stock but you HAVE to leave the phone S-OFF. THIS RUU IS NOT FOR XE
Xe is here if you can get link to work i am not hosting this file http://www.filefactory.com/file/c0a...00U_10.15.9035.02_2_release_214840_signed.exe
I made my CID HTC__001 but some are better with 11111111http://forum.xda-developers.com/showthread.php?t=1192300 "step 4" i used HTC__001
1. You're now running stock gb 2.3.3 with Sense 3.0
2. download the 3.32.401.5 OTA file from HTC http://www.4shared.com/zip/SKaYUBFP/OTA_Euro_3324015.html . You do NOT have to rename the file
3. Put let this.download
4. turn phone on load it all the way UPDATE IT WITH O.T.A 2X FIRST IS NOTHING SECOND IS 1.50 AND WILL LET YOU UPDATE TO 3.32
5. find file from step from 2
6. Copy the file to the root of your SD card
7. Turn your phone off and turn it back on whilst holding the volume down button.
8. Select 'Recovery' from the menu to enter the stock Recovery. If CWM loads up, stop now and flash the RUU again
9. When you get to the screen with the red ! on it, hold volume up and press power. It will say 'cant open cache/recovery/command' and then bring up the recovery menu
Select the option to apply an update from your SD card and then select the OTA file
7. Wait the 10 minutes or so for it to flash
8. When prompted, reboot the phone
above was edited form poster as to what i did
12. onec you flash the 3.32.401.5 OTA file from sd card
boot 100% you will have 2.32 at this point but not done
flash http://forum.xda-developers.com/showthread.php?t=1459767
second list for HTC__001
13.download CWM recovery http://www.4shared.com/zip/QJPydsPo/PG58IMG-recovery.html remover recovery from name then paste to sd root and flash img
or 4EXT Recovery Touch v1.0.0.4 RC 1 if you can find img
14. now you can got back to http://forum.xda-developers.com/showthread.php?t=1192300[/url] "step 4"and super CID if you like for keep what you got
your done !!!!!!!!!!!! time to flash again
"this rom will not have superuser and/or be rooted pick from below to gain root or find a rom
you can now flash
"Revolution HD™ 6.5.1" by mike1986
"[xXKingsRomXx]***Endo-Sense 4.0
"☆ b l a c k I C E _ 5 . 0 . 1 ☆ \__/ _ [ICS 4.0.3][Sense 4.0]
"Virtuous with Sense 4.0
and what may come next
again this is what i did and may help you guys looking to get to 3.32 that gets boot loops
after new rom installed if it hangs reformat sd card thanks to xXkingsromXx for last little push to get me in with 4.0
on a side note i want to say to anyone having trouble there are some here willing to help and some sending people to google i was sent to google and thought i post the work around i did
You are amazing, thanks!
Ill try it as fast as i can.
Thank you, this cured my boot loop.
I just posted this over on the ARHD thread. Do you think that this maybe my case? Any advise would be greatly appreciated.
About a week ago I SuperCID my phone. I then went to load a ICS ROM. I have not been able to get my phone to do anything but startup into HBOOT and/or Recovery. I either was getting stuck in a boot loop or would get the "HTC Quietly Brilliant" screen. I spent the whole weekend on the forums and still no luck. I was hoping someone could see something that I maybe doing wrong. The one issue that I know is wrong is the Radio version needed for ARHD is 11.69.3504.00U_11.22.3504.07_M. I tried to use a program called Android Flasher to load the correct radio but I don't think that that occurred. Below is all the information that I can gather.
TMOUSA Sensation 4G
On HBOOT Screen:
Revolutionary
Pyramid PVT SHIP S-Off RL
HBOOT - 1.27.1100
Radio - 11.22.3504.07_M
OpenADSP - V02.6.0.2226.00.0131
eMMC - Boot
Jan 13, 2012 17:33:34
Other specifics:
ARHD 6.51.1.zip ROM
ARHD SuperWipe.zip
4EXT v1.0.0.4 RC1 installed and working properly
PG58IMG is 3.32 for TMOUSA
CID and MID
CID 11111111
MID PG5810000
Any help would be greatly appreciated. If needed, I can upload a copy of the logcat while the phone boots up. Thanks in advance.
best best flash firmware 1,17 and then restart
then runn the ruu file
turn phone on fastboot make sure no img files in sd card ruu will see phone and bring you to step 1 in my post
fastboot is 1 step past were firmware installs make sure you have no img on sd card
its the firmware some of our phone just dont want to take it from 2.24-3.32 not sure why if your not getting in rom you can try backing up sd card formate it putting rom on it only rewipe and flash with nothing on it "king said dirty sd card" and try if not follow my steps
I will definitely try this tomorrow. Your instructions will work with TMOUSA correct?
carrier dont matter when you play with cid
but yeah tmob will work
ecardwell1 said:
I will definitely try this tomorrow. Your instructions will work with TMOUSA correct?
Click to expand...
Click to collapse
side not if you go to 3.12 and then you can flash the rom you had in before you started to play with update
craven667 said:
ok i got litle bit from all over no clue who posted it dont care just telling you how i fix my phone
i tried to get 3.24-3.32 firmware on it and wouldnt go ketp boot looping
or any problems your having installing O.T.A update
i was asked why host files on 3rd party cuz i got sick of none working ones i know the ones i got posted work
Firstly - you HAVE to be running 1.50.401.1 to use this OTA file. and 1.17 firmware If you're on ANY other build it wont work
firmware can be found here for 1.17
http://forum.xda-developers.com/showthread.php?t=1459767
You also have to be 100% stock (e.g. NOT rooted). If you are running a custom ROM you HAVE to use the http://www.4shared.com/file/risaQet4/RUU_Pyramid_HTC_Europe_1454012.htm RUU to get back to stock but you HAVE to leave the phone S-OFF.
I made my CID HTC__001 http://forum.xda-developers.com/showthread.php?t=1192300 "step 4" i used HTC__001
1. You're now running stock gb 2.3.3 with Sense 3.0
2. download the 3.32.401.5 OTA file from HTC http://www.4shared.com/zip/SKaYUBFP/OTA_Euro_3324015.html . You do NOT have to rename the file
3. Select the option to apply an update from your SD card and then select the OTA file
4. turn phone on load it all the way UPDATE IT WITH O.T.A 2X FIRST IS NOTHING SECOND IS 1.50 AND WILL LET YOU UPDATE TO 3.32
5. find file from step from 2
6. Copy the file to the root of your SD card
7. Turn your phone off and turn it back on whilst holding the volume down button.
8. Select 'Recovery' from the menu to enter the stock Recovery. If CWM loads up, stop now and flash the RUU again
9. When you get to the screen with the red ! on it, hold volume up and press power. It will say 'cant open cache/recovery/command' and then bring up the recovery menu
7. Wait the 10 minutes or so for it to flash
8. When prompted, reboot the phone
above was edited form poster as to what i did
12. onec you flash the 3.32.401.5 OTA file from sd card
boot 100% you will have 2.32 at this point but not done
flash http://forum.xda-developers.com/showthread.php?t=1459767
second list for HTC__001
13.download CWM recovery http://www.4shared.com/zip/QJPydsPo/PG58IMG-recovery.html remover recovery from name then paste to sd root and flash img
or 4EXT Recovery Touch v1.0.0.4 RC 1 if you can find img
14. now you can got back to http://forum.xda-developers.com/showthread.php?t=1192300[/url] "step 4"and super CID if you like for keep what you got
your done !!!!!!!!!!!! time to flash again
"this rom will not have superuser and/or be rooted pick from below to gain root or find a rom
you can now flash
"Revolution HD™ 6.5.1" by mike1986
"[xXKingsRomXx]***Endo-Sense 4.0
"☆ b l a c k I C E _ 5 . 0 . 1 ☆ \__/ _ [ICS 4.0.3][Sense 4.0]
"Virtuous with Sense 4.0
and what may come next
again this is what i did and may help you guys looking to get to 3.32 that gets boot loops
after new rom installed if it hangs reformat sd card thanks to xXkingsromXx for last little push to get me in with 4.0
Click to expand...
Click to collapse
Sorry dear. I could not get in touch with my pc. Nice that you have solved it. Thanks for sharing..
craven667 said:
Firstly - you HAVE to be running 1.50.401.1 to use this OTA file. and 1.17 firmware If you're on ANY other build it wont work
firmware can be found here for 1.17
http://forum.xda-developers.com/showthread.php?t=1459767
Click to expand...
Click to collapse
OK dumb question. Will the 1.17 FW load the 1.50.401.1 with it or do I have to get that from somewhere?
craven667 said:
You also have to be 100% stock (e.g. NOT rooted). If you are running a custom ROM you HAVE to use the http://www.4shared.com/file/risaQet4/RUU_Pyramid_HTC_Europe_1454012.htm RUU to get back to stock but you HAVE to leave the phone S-OFF.
Click to expand...
Click to collapse
I know with the RUU that the phone has to be up and running. Is there a way to run the RUU if the phone can only be loaded into HBOOT or recovery?
Yeah ruu will run in fastboot make sure you have no IMG files
Sent from my HTC Sensation 4G using xda premium
ecardwell1 said:
OK dumb question. Will the 1.17 FW load the 1.50.401.1 with it or do I have to get that from somewhere?
Click to expand...
Click to collapse
Ok 1.17 is firmware to run ruu will bring you to 1.45 and then settings about phone ota 2x for 1.50 then your good
Sent from my HTC Sensation 4G using xda premium
easy breezy
Here's where I'm at now. I cannot update to 1.50 because HTC complains of a "Variant System Version" when I try to do the 1.50 OTA. I simply cannot figure out any way around this. My recovery is stock, CID is HTC__001 as you mentioned, and I can't move forward because I can't get this 1.50 installed.
thracky said:
Here's where I'm at now. I cannot update to 1.50 because HTC complains of a "Variant System Version" when I try to do the 1.50 OTA. I simply cannot figure out any way around this. My recovery is stock, CID is HTC__001 as you mentioned, and I can't move forward because I can't get this 1.50 installed.
Click to expand...
Click to collapse
did you run the ruu and go to stock and format sdcard once there let phone boot up 100% then settings about phone look check for updates restart then do it again to be 1.50 ??
ok need more info to what you done so far your in Canada do you have xe ???
craven667 said:
did you run the ruu and go to stock and format sdcard once there let phone boot up 100% then settings about phone look check for updates restart then do it again to be 1.50 ??
ok need more info to what you done so far your in Canada do you have xe ???
Click to expand...
Click to collapse
Ran the RUU, let the phone boot up, checked for updates, update fails with the error I mentioned above.
I do not have the XE, just the regular Virgin Sensation. I had Virtuous 3.0.0 on there before but was trying to upgrade to 4.0.0 and got the boot loop after upgrading the firmware.
Would it not be easier just to RUU straight to 1.50?
So I decided to run an old'ish ICS Pyramid RUU I had lying around that I *knew* worked previously, RUU_PYRAMID_LE_ICS_35_S_HTC_Europe_3.06.401.101_Radio_11.59.3504.00U_11.16.3504.16_M_test_231336.
Then I flashed recovery, latest 3.32 firmware, did superwipe & virtuous 4.0.0. Everything works perfect!
Well if you don't have a xe the ruu should not have worked hmmmm yeah you can run Thu to 150 but all the ones I downloaded didn't work with bootloops
Sent from my HTC Sensation 4G using xda premium

Help please!

I have been at this for 5 hours straight and I just can't find a SOLUTION...I've READ A LOT before posting this question...and still I can't find anything to help me. So can someone PLEASE HELP if you can. I will be as detailed as i can. I will start off with my phone specs and so forth: By the way i am on GB 2.3.4..
LOCKED
Pyramid PVT SHIP S-OFF RL
HBOOT- 1.27.000
Radio- 11.22.3504.07_M
OpenADSP-v02.6.0.2226.00.0131
emmc- boot
Okay, i wanted to download the ELEGANCIA ICS ROM but before i could i had to download a FIRMWARE PACKAGE(or just firmware). So i downloaded the Firmware from 3.32 RUU which is for the ELEGANCIA ROM...By the way, I DID THIS BEFORE I INSTALLED the ELEGANCIA ROM(i hadn't downloaded it yet..elegancia rom) I followed the instructions how to flash it. It said it would tell you what to do next..so i did it. Went into Recovery and flashed through sd and installed the ZIP file and when it asked if i wanted to udate it i pressed Yes...and then this is what HAPPENs NEXT.
It ask if i want to update and I do and then it says:
Parsing...[ SD ZIP]
[1] BOOTLOADER - Ok
Update Complete...
Press POWER to reboot.
So i press power and all it does is: BOOTS up and then TURNS OFF
It continues to do that...I believe it's called BOOT LOOPING.?
I pull out the battery and press VOL. Down plus POWER at the same tiime and it takes me back to the WHITE SCREEN and I see FASTBOOT, RECOVERY, FACTORY RESET, SIMLOCK and IMAGE CRC but does NOT let me choose. It automatically goes to HBOOT.
I have to pull battery or it will continue to BOOT itself on and off again. Even with the phone off, I connect it to my usb connection on my laptop and my device does not show on my laptop. Both the usb connection and usb cord are working properly.
That is my BIG PAIN in MY ASS right now!!
Can someone please help me.?
You will have to make your phone Super-CID or download the correct firmware package that fit your CID.
Super-CID makes you able to flash any firmware package etc.
Guide for Super-CID: http://forum.xda-developers.com/showthread.php?t=1192300
Sigg1996 said:
You will have to make your phone Super-CID or download the correct firmware package that fit your CID.
Super-CID makes you able to flash any firmware package etc.
Guide for Super-CID: http://forum.xda-developers.com/showthread.php?t=1192300
Click to expand...
Click to collapse
THANK YOU for the response but how do I do that if i can"t power my phone on since it just re boots?
I am on T Mobile USA. How do I know which Firmware Package to choose?
Find my post I will bump it in general
Sent from my HTC Sensation using xda premium
thekoopers said:
THANK YOU for the response but how do I do that if i can"t power my phone on since it just re boots?
I am on T Mobile USA. How do I know which Firmware Package to choose?
Click to expand...
Click to collapse
i think you have to retore your phone to stock if you cant log to hboot :/
if you can load to hboot then find the cid ( or just supercid -check my sig) then flash the correct firmware file
Sent from my HTC Sensation 4G using XDA App
namila007 said:
i think you have to retore your phone to stock if you cant log to hboot :/
if you can load to hboot then find the cid ( or just supercid -check my sig) then flash the correct firmware file
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
You stated that your ROM was GB and that's not supported on the 3.32 F/W.
Download your ICS ROM and mike's SuperWipe script from the ARHD thread.
Copy them to the SDcard via the PC and a USB <-> microSD adapter.
Delete the PG58IMG.zip file on the SDcard.
Boot the phone into Bootloader, get into Recovery, SuperWipe and flash the ROM.
You also have a locked version (1.27.0000) of the HBOOT, I suggest at some stage installing an unlocked version (1.27.1100) from: http://forum.xda-developers.com/showthread.php?t=1459767
namila007 said:
i think you have to retore your phone to stock if you cant log to hboot :/
if you can load to hboot then find the cid ( or just supercid -check my sig) then flash the correct firmware file
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
How do i restore to stock? I have already read the supercid but it does say phone has to be turned on and everytime i turn phone on it just turns off again then on..etc...
namila007 said:
i think you have to retore your phone to stock if you cant log to hboot :/
if you can load to hboot then find the cid ( or just supercid -check my sig) then flash the correct firmware file
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
craven667 said:
Find my post I will bump it in general
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
I just found your post and i will try and follow your instructions to the tee...if I have a problem with anything I will ask you on your post.
Thanks, craven667
thekoopers said:
How do i restore to stock? I have already read the supercid but it does say phone has to be turned on and everytime i turn phone on it just turns off again then on..etc...
Click to expand...
Click to collapse
Don't bother restoring to stock, waste of effort.
Read my previous post.
1. Anyway, did the ICS F/W update work ?
2. Is the PG58IMG.zip file still on the SDcard ? If so rename /delete it.
3. Get your chosen ICS ROM and mike's SuperWipe script onto the SDcard.
4. Go into recovery and run the Superwipe script then flash the ROM.
Steps 2 & 3 you'll need to use a PC to do these with a USB <-> microSD adapter.
I am assuming that there wasn't a typo in your original post in that you actually have HBOOT 1.27.0000, this is ICS ONLY firmware and GB won't work on it.
BTW what recovery have you got ? CWM or 4EXT ?
gol_n_dal said:
You stated that your ROM was GB and that's not supported on the 3.32 F/W.
Download your ICS ROM and mike's SuperWipe script from the ARHD thread.
Copy them to the SDcard via the PC and a USB <-> microSD adapter.
Delete the PG58IMG.zip file on the SDcard.
Boot the phone into Bootloader, get into Recovery, SuperWipe and flash the ROM.
You also have a locked version (1.27.0000) of the HBOOT, I suggest at some stage installing an unlocked version (1.27.1100) from: http://forum.xda-developers.com/showthread.php?t=1459767
Click to expand...
Click to collapse
I will try what you said to do.
Thanks, gol_sol.
Very much appreciated.
gol_n_dal said:
Don't bother restoring to stock, waste of effort.
Read my previous post.
1. Anyway, did the ICS F/W update work ?
2. Is the PG58IMG.zip file still on the SDcard ? If so rename /delete it.
3. Get your chosen ICS ROM and mike's SuperWipe script onto the SDcard.
4. Go into recovery and run the Superwipe script then flash the ROM.
Steps 2 & 3 you'll need to use a PC to do these with a USB <-> microSD adapter.
I am assuming that there wasn't a typo in your original post in that you actually have HBOOT 1.27.0000, this is ICS ONLY firmware and GB won't work on it.
BTW what recovery have you got ? CWM or 4EXT ?
Click to expand...
Click to collapse
+1 10 char. I also do not suggest to flash an RUU.
gol_n_dal said:
You stated that your ROM was GB and that's not supported on the 3.32 F/W.
Download your ICS ROM and mike's SuperWipe script from the ARHD thread.
Copy them to the SDcard via the PC and a USB <-> microSD adapter.
Delete the PG58IMG.zip file on the SDcard.
Boot the phone into Bootloader, get into Recovery, SuperWipe and flash the ROM.
You also have a locked version (1.27.0000) of the HBOOT, I suggest at some stage installing an unlocked version (1.27.1100) from: http://forum.xda-developers.com/showthread.php?t=1459767
Click to expand...
Click to collapse
gol_n_dal said:
Don't bother restoring to stock, waste of effort.
Read my previous post.
1. Anyway, did the ICS F/W update work ?
2. Is the PG58IMG.zip file still on the SDcard ? If so rename /delete it.
3. Get your chosen ICS ROM and mike's SuperWipe script onto the SDcard.
4. Go into recovery and run the Superwipe script then flash the ROM.
Steps 2 & 3 you'll need to use a PC to do these with a USB <-> microSD adapter.
I am assuming that there wasn't a typo in your original post in that you actually have HBOOT 1.27.0000, this is ICS ONLY firmware and GB won't work on it.
BTW what recovery have you got ? CWM or 4EXT ?
Click to expand...
Click to collapse
I just tried it and the phone is ON NOW BUT it is just on the White screen with the Green HTC letters. It has been on for 15 minutes already...By the way, I DO NOT have a microSD adapter. I did it by getting into CWM and going to Recovery and going into mounts and then i mounted it and was able to install it like that. Is that the reason why it is still on the White HTC screen? Do I pull the Battery?
Another thing I still haven't flashed my ICS Rom because when i DID Mike's SuperWipe it did it's thing and just automattically went to the White HTC screen.
No, there is NO TYPO, that is exactly what it says. I believe i still have CWM and I remember tthat I had 4ext to.
thekoopers said:
I just tried it and the phone is ON NOW BUT it is just on the White screen with the Green HTC letters. It has been on for 15 minutes already...By the way, I DO NOT have a microSD adapter. I did it by getting into CWM and going to Recovery and going into mounts and then i mounted it and was able to install it like that. Is that the reason why it is still on the White HTC screen? Do I pull the Battery?
Another thing I still haven't flashed my ICS Rom because when i DID Mike's SuperWipe it did it's thing and just automattically went to the White HTC screen.
No, there is NO TYPO, that is exactly what it says. I believe i still have CWM and I remember tthat I had 4ext to.
Click to expand...
Click to collapse
So precisely what have you got on the SDcard at the moment ?
PG58IMG.zip ?
SuperWipe.zip (or what ever the name is) ?
ICS ROM "zip" file ?
Edit: If you used the superwipe script you have no OS on the phone and will NEED to flash an ICS ROM through recovery. It shouldn't have gone to the white HTC screen just returned to CWM. If you don't have an ICS ROM on the phone's SDcard you can try adb pushing it or possibly use another device that has microUSB capability.
gol_n_dal said:
So precisely what have you got on the SDcard at the moment ?
PG58IMG.zip ?
SuperWipe.zip (or what ever the name is) ?
ICS ROM "zip" file ?
Edit: If you used the superwipe script you have no OS on the phone and will NEED to flash an ICS ROM through recovery. It shouldn't have gone to the white HTC screen just returned to CWM. If you don't have an ICS ROM on the phone's SDcard you can try adb pushing it or possibly use another device that has microUSB capability.
Click to expand...
Click to collapse
What I have now is Superwipe.zip and ICS ROM.zip. I deleted the PG58IMG that I had on the SD Card before I did the SUPERWIPE.
I pulled out the battery and got into recovery and installed from sdcard and I went to install ICS ROM and it started but then it said ABORTED. Tried again and said the same thing.
Should I try another ICS ROM?
What about not having the PG58IMG?
thekoopers said:
What I have now is Superwipe.zip and ICS ROM.zip. I deleted the PG58IMG that I had on the SD Card before I did the SUPERWIPE.
I pulled out the battery and got into recovery and installed from sdcard and I went to install ICS ROM and it started but then it said ABORTED. Tried again and said the same thing.
Should I try another ICS ROM?
What about not having the PG58IMG?
Click to expand...
Click to collapse
It seems that your ics ROM is corrupted. Did you check the md5sum of the ROM zip file?
Sent from my Sensation using Tapatalk
musarraf172 said:
It seems that your ics ROM is corrupted. Did you check the md5sum of the ROM zip file?
Sent from my Sensation using Tapatalk
Click to expand...
Click to collapse
I did not check that but I will Re-Flash and see if it works.
Thanks musarraf172
thekoopers said:
I did not check that but I will Re-Flash and see if it works.
Thanks musarraf172
Click to expand...
Click to collapse
In stead of writing "Thanks" please hit the thanks button...

TMOUSA Sensation 4G help

Alright guys I got s-off and thats about it. I want ics on my phone but once I update to the nnewest firmware and flash an ics rom it stays stuck on white HTC screen. I've had to use RUU twice because I can't load a recovery without updating firmware and once i do that my phone does not boot. Anyone have any ideas on what I can do to get ics on my sensation 4g?
Make sure you get SuperCID so the firmware update goes through. If you don't have SuperCID then it can look like it updated but it actually fails.
Once you get the firmware flashed properly, you have to delete or rename the firmware zip from your SD card so that you can access recovery.
dallashigh said:
Make sure you get SuperCID so the firmware update goes through. If you don't have SuperCID then it can look like it updated but it actually fails.
Once you get the firmware flashed properly, you have to delete or rename the firmware zip from your SD card so that you can access recovery.
Click to expand...
Click to collapse
I did that. super cid to 11111111 and to the latest firmware even tried it with the patch. I am able to go into recovery but everytime I flash any rom it stays stuck on the white HTC screen after I boot it up.
Sounds like you might be one of those unlucky users. Have you tried this guide? http://forum.xda-developers.com/showthread.php?t=1542555
TopazUser1 said:
Alright guys I got s-off and thats about it. I want ics on my phone but once I update to the nnewest firmware and flash an ics rom it stays stuck on white HTC screen. I've had to use RUU twice because I can't load a recovery without updating firmware and once i do that my phone does not boot. Anyone have any ideas on what I can do to get ics on my sensation 4g?
Click to expand...
Click to collapse
The steps I used are...flash firmware 3.32 ,then superwipe( very important if coming from GB, then Rom this has seemed to work for me..
Also did you do a MD5 to check the file of the Rom to make sure it was the same?
Sent from my HTC Sensation 4G using XDA
---------- Post added at 10:38 PM ---------- Previous post was at 10:13 PM ----------
TopazUser1 said:
I did that. super cid to 11111111 and to the latest firmware even tried it with the patch. I am able to go into recovery but everytime I flash any Rom it stays stuck on the white HTC screen after I boot it up.
Click to expand...
Click to collapse
The problem with this might be which version of htc sense was cooked into the Rom you are using. If you are using a android 4.0.3 rom with sense 3.5 then you need firmware package 3.12 because sense 3.5 needs HBOOT 1.23, and sense 3.6 needs HBOOT 1.27 so you would use the 3.24, 3.30, 3.32 but again it all depends on what the chef has built from if the chef used a 3.5 sense in the rom then that might be your issue.
If not try to just start over, completely format your sd card, then put your rom, supersipe, and firmware on sd card.
1. install firmware from recovery once installed pull battery out and remove sd to take off the firmware file,
2. reinstall sd card, boot phone into recovery- go to install from zip and run the superwipe script once it finishes it will reboot into recovery.
3. then install the rom of your choosing and see if that works.
I use the energy rom series and flashed over from GB using the instructions i found in that forum, it does get confusing if you have not do it a million times....hope this helps ICS is awesome...
I want to super wipe but I'm not sure which one to download. Also guys, I'm on stock tmobile usa rom. No custom rom
TopazUser1 said:
I want to super wipe but I'm not sure which one to download. Also guys, I'm on stock tmobile usa rom. No custom rom
Click to expand...
Click to collapse
I used the super wipe from android revolution...u have to make sure it is a sensation superwipe though...if I were u I would head to the android development forum and there are step by step guides I have used android revolution and the energy Rom series both have pretty good instructions..pm if u need help it can get confusing...also when u flashed firmware were you still on stock GB Rom?
Sent from my HTC Sensation 4G using XDA
snoop101 said:
I used the super wipe from android revolution...u have to make sure it is a sensation superwipe though...if I were u I would head to the android development forum and there are step by step guides I have used android revolution and the energy Rom series both have pretty good instructions..pm if u need help it can get confusing...also when u flashed firmware were you still on stock GB Rom?
Sent from my HTC Sensation 4G using XDA
Click to expand...
Click to collapse
Yes I was. I was s-off and custom recovery. Am I not suppose to flash firmware over stock rom?
TopazUser1 said:
Yes I was. I was s-off and custom recovery. Am I not suppose to flash firmware over stock rom?
Click to expand...
Click to collapse
Stock is not needed.
You need to ensure that F/W and ROM are compatible. I.e. ICS 1.27.xxxx F/W WILL NOT work with a GB ROM, and GB 1.17.xxxx WILL NOT work with ICS.
Flash the F/W, if not already done. Can't remember what you are on.
SuperWipe (from Mike's ARHD thread).
Flash your chosen ICS ROM.
Pop out the SD card, reboot insert and then delete the PG58IMG.zip ONLY if you flashed the F/W.
Deep joy.
TopazUser1 said:
Yes I was. I was s-off and custom recovery. Am I not suppose to flash firmware over stock rom?
Click to expand...
Click to collapse
What Rom do u plan on using...if I knew that I could tell you exactly what firmware to flash, it dosent matter that u flash firmware over stock rom, but if the firmware isn't compatible then the phone won't boot up...
Sent from my HTC Sensation 4G using XDA

[Q] WHat is RUU and How To Flash/change RUU

NOOB NEED SOME INFORMATION ABOUT RUU
what is ruu ? How it relates with rom
how to flash it or change ruu
If i am on SuperCID , can i flash any rom without changing RUU ?
lilliput222 said:
NOOB NEED SOME INFORMATION ABOUT RUU
what is ruu ? How it relates with rom
how to flash it or change ruu
If i am on SuperCID , can i flash any rom without changing RUU ?
Click to expand...
Click to collapse
RUU---ROM UPDATE UTILITY
(its an .exe which is run from windows pc ..you need to double click on it to start it)
relation to rom -> official way of updating your ROM via HTC
Changing RUU --kind of impossible
flashing RUU ---you can flash any RUU if you are superCID and SOFF
RUU are dependant on CID and current firmware your device is having
If i am on SuperCID , can i flash any rom without changing RUU ?
Click to expand...
Click to collapse
this question doesn't make sense
ganeshp said:
RUU---ROM UPDATE UTILITY
(its an .exe which is run from windows pc ..you need to double click on it to start it)
relation to rom -> official way of updating your ROM via HTC
Changing RUU --kind of impossible
flashing RUU ---you can flash any RUU if you are superCID and SOFF
RUU are dependant on CID and current firmware your device is having
this question doesn't make sense
Click to expand...
Click to collapse
Thanks for your help mate , but i still have some queries
ELEGANCIA™ Rom Series
RUU- RUU 3.32.401.105
Android Revolution HD 6.6.4
RUU- Final HTC RUU 3.32.401.105_R
OrDroid 6.0.0
RUU- HTC One S latest RUU (1.78.401.2)
WHERE TO GET THESE RUU ??
lilliput222 said:
Thanks for your help mate , but i still have some queries
ELEGANCIA6¾4 Rom Series
RUU- RUU 3.32.401.105
Android Revolution HD 6.6.4
RUU- Final HTC RUU 3.32.401.105_R
OrDroid 6.0.0
RUU- HTC One S latest RUU (1.78.401.2)
WHERE TO GET THESE RUU ??
Click to expand...
Click to collapse
Mate these are not RUU, they are just a reference, for example v3.32 is an RUU, Android Revolution HD, Elegancia etc are Custom ROMs based on v3.32 RUU, that's why they mentioned it in there respective titles. Majority People don't flash RUUs, instead they flash custom ROMs made by the devs, they modifies the RUU, and brings it for us with various fixes and Enhancments. I hope my brief post will help make it clear for you.
Alipk52 said:
Mate these are not RUU, they are just a reference, for example v3.32 is an RUU, Android Revolution HD, Elegancia etc are Custom ROMs based on v3.32 RUU, that's why they mentioned it in there respective titles. Majority People don't flash RUUs, instead they flash custom ROMs made by the devs, they modifies the RUU, and brings it for us with various fixes and Enhancments. I hope my brief post will help make it clear for you.
Click to expand...
Click to collapse
thanks mate , totally cleared
Glad it did clear your query...if you need original RUU (exe) files, You can grab it Here. It contains the latest RUU as well..
Just want to clarify...so to install a RUU...do I need to have CWM already installed or can it be on stock recovery? I am already S-off...and I've changed CWM to stock recovery....and superCID to the Tmobile one....if I want to flash the TMOUS RUU...is that all I need to do...just run the RUU?
newr said:
Just want to clarify...so to install a RUU...do I need to have CWM already installed or can it be on stock recovery? I am already S-off...and I've changed CWM to stock recovery....and superCID to the Tmobile one....if I want to flash the TMOUS RUU...is that all I need to do...just run the RUU?
Click to expand...
Click to collapse
If you want to flash RUU, Refer to This Guide, and follow the steps carefully, and i think you can go to Sensation Android Development and choose to flash the custom ROMs, in my opinion they are highly enhanced for performance, use Insert Coin or Virtuous Inquisition instead.
ganeshp said:
RUU---ROM UPDATE UTILITY
(its an .exe which is run from windows pc ..you need to double click on it to start it)
relation to rom -> official way of updating your ROM via HTC
Changing RUU --kind of impossible
flashing RUU ---you can flash any RUU if you are superCID and SOFF
Click to expand...
Click to collapse
You seem to know ur stuff im hoping you can help me.
Brand new stock Telstra HTC One XL (Australia)
Unlocked & rooted, TWRP recovery.
Backed up stock.
Installed a few different ROMs before deciding on one.
Accidentally reset factory from hboot instead of twrp.
Lost stock ROM back up.
Mounted USB & copied custom ROMs back across to sdcard.
Files did not appear on sdcard.
Decided to partition and try again.
On sucessful partition, suddenly all files became visible, despite partition warning "all files will be deleted"
Flashed Viper XL successfully.
SDcard total storage reading as 24gb (32gb stock)
1. if i have done anything to reduce my available storage i want to get it back.
2. id like to go back to stock rom and basically start from scratch with clean stock backup and clean storage.
I found a link to the ATT One X stock rom on the US HTC support site.
I cant find anything similar on the AU site for the One XL.
I read i have to re-lock my bootloader, thats fine i found a tutorial, but i need to find the stock rom.
Also i have no understanding of RUU nor do i have it downloaded.
EDIT-
I have just downloaded RUU Evita UL Telstra WWE 1.89. 841.9 Radio 0.18c.32.09.01 10.9 3a.32.20L release 266699 signed .exe
As per the info in hboot.
Thanks in advance.
Wobzy said:
You seem to know ur stuff im hoping you can help me.
Brand new stock Telstra HTC One XL (Australia)
Unlocked & rooted, TWRP recovery.
Backed up stock.
Installed a few different ROMs before deciding on one.
Accidentally reset factory from hboot instead of twrp.
Lost stock ROM back up.
Mounted USB & copied custom ROMs back across to sdcard.
Files did not appear on sdcard.
Decided to partition and try again.
On sucessful partition, suddenly all files became visible, despite partition warning "all files will be deleted"
Flashed Viper XL successfully.
SDcard total storage reading as 24gb (32gb stock)
1. if i have done anything to reduce my available storage i want to get it back.
2. id like to go back to stock rom and basically start from scratch with clean stock backup and clean storage.
I found a link to the ATT One X stock rom on the US HTC support site.
I cant find anything similar on the AU site for the One XL.
I read i have to re-lock my bootloader, thats fine i found a tutorial, but i need to find the stock rom.
Also i have no understanding of RUU nor do i have it downloaded.
EDIT-
I have just downloaded RUU Evita UL Telstra WWE 1.89. 841.9 Radio 0.18c.32.09.01 10.9 3a.32.20L release 266699 signed .exe
As per the info in hboot.
Thanks in advance.
Click to expand...
Click to collapse
This is sensation only forum.. But as the question is kinda generic I can help you
Now if you want to go back to stock then options are
1. Restore the stock backup (which you've lost now)
2. Flash a recovery flashable zip (just like a custom rom zip) of stock rom (which makes it almost stock)... You need to find it in the Sensation xl section of xda
3. Flash a ruu..Use this guide as reference http://forum.xda-developers.com/showthread.php?p=26541170 (everything won't apply for you.. But almost 90% of it applies)
As for sdcard data loss.. Backup the current contents of sdcard and do a proper format of the sdcard using sdpartitioner(a good tool for formatting sdcard in windows)
Btw I don't understand why you need a partition of sdcard
Sent from my HTC Sensation 4G using xda premium
ganeshp said:
Btw I don't understand why you need a partition of sdcard
Click to expand...
Click to collapse
It was suggested to me by a mate who has more experience with android than i do.
Thought it might be a good idea to put the back up / roms there.
Just found it odd that after mouting and transferring them, they didnt actually become visible until after the partition was created?
Thanks for the rest of the advice i'll give it a look.
I replied to you here knowing its a sensation forum only because when i searched this was the only relevant thread i found.
I found this tutorial and have followed it to step 5. the point of flashing the recovery.img but i get "error; cannot load recovery.img"
1. Download the correct RUU for your device and carrier!!
2. Charge the battery above 50% or for at least one hour. If the battery dies during the flashing process, you could hard brick the phone!
3. Run the RUU until the wizard comes up. While the RUU wizard is open, find the temporary folder it created. (Open Explorer in Windows and type %temp% in the navigation bar.) There will be two folders with long encrypted names. In one of them you will find ROM.zip. Open it with 7zip and extract recovery.img. Put it in the location were you've installed Android SDK tools. This is the stock HTC Recovery and it is needed to run the RUU.
4. Boot the phone into bootloader (power off, hold down volume and press power) and highlight FASTBOOT using the volume rocker and pressing power. Then connect the USB cable. You should see FASTBOOT USB.
5. Open a command prompt in Windows and navigate to the folder where you installed Android SDK tools. Flash the stock recovery extracted in step 3 above using the following command:
fastboot flash recovery recovery.img
6. Relock the bootloader using the following command:
fastboot oem lock
7. Re-run the RUU. It will restore the device to it's original condition, locked (though *** RELOCKED ***) and unrooted.
Once the install is done you'll have unlock the bootloader again using the token you already have from the first time, reflash CWM Recovery and re-root. All this will be 10x easier than the first time.
If you do re-root your phone, be 100% you backup the stock ROM in ClockworkMod Recovery before making changes!
Click to expand...
Click to collapse
The rom.zip mentioned here, is that my stock rom?
---------- Post added at 01:42 PM ---------- Previous post was at 01:29 PM ----------
Sorted, RUU is flashing now. Cheers bud.
Wobzy said:
It was suggested to me by a mate who has more experience with android than i do.
Thought it might be a good idea to put the back up / roms there.
Just found it odd that after mouting and transferring them, they didnt actually become visible until after the partition was created?
Thanks for the rest of the advice i'll give it a look.
I replied to you here knowing its a sensation forum only because when i searched this was the only relevant thread i found.
I found this tutorial and have followed it to step 5. the point of flashing the recovery.img but i get "error; cannot load recovery.img"
The rom.zip mentioned here, is that my stock rom?
---------- Post added at 01:42 PM ---------- Previous post was at 01:29 PM ----------
Sorted, RUU is flashing now. Cheers bud.
Click to expand...
Click to collapse
Ohh good.. Actually I'm in middle of posting a reply and now edited it to this once I got your reply..
Sent from my HTC Sensation 4G using xda premium
I normally only ruu my phone if it gets stuck and can't get to recovery cuz it was removed or something, or if u was fully stock cuz u forgot to backup ur stock from, easy to do thou
Sent from my HTC Sensation XE with Beats Audio Z715e using XDA Premium HD app

flashing radio.

hey there. Just another noob question:
How can I find out what radio am I using? Can I flash the PG zip archive in recovery just like I flash the kernel? If so, do I always need to do that when I install roms? Is the radio included in the rom? I think of it as like firmware or recovery, you have to flash the lastest when it was released and that's about it, it does not get wiped when you go to format all parititions, right?
How about firmware? Can I flash this too in recovery? Thx.
To flash firmware you place the pg58img file at the root of sd card , then you boot into bootloader by pulling battery putting battery back in press volume and power at the same time, it will recognise the update and ask to continue press power for yes, let it update them REMOVE the pg58img file from your card or it will continuously try to update the file! I remove mine by pulling the sd card and put in a card reader and delete the file. Delete it how ever you want just make sure you delete it ok. Then your done. That's how you install firmware. Hope I helped.
Sent from my Sensation Z710e using xda premium
STk3000 said:
hey there. Just another noob question:
How can I find out what radio am I using? Can I flash the PG zip archive in recovery just like I flash the kernel? If so, do I always need to do that when I install roms? Is the radio included in the rom? I think of it as like firmware or recovery, you have to flash the lastest when it was released and that's about it, it does not get wiped when you go to format all parititions, right?
How about firmware? Can I flash this too in recovery? Thx.
Click to expand...
Click to collapse
Hi,
To check radio, go to:
Settings/ about phone/ software information/ more/ baseband version.
Radio gets installed with the firmware.
It does not need to be flashed with every ROM.
Yes, it gets flashed in recovery.
It does not get wiped when you wipe the partitions.
Be very careful when flashing radio or firmware.
Always check the md5 checksum
If you flash the wrong one, or a bad one, it will brick your phone.
So i can flash firmware in 4ext right? If it is wrong... should i get any warning message? Thx
Sent from my HTC Sensation using xda app-developers app
STk3000 said:
So i can flash firmware in 4ext right? If it is wrong... should i get any warning message? Thx
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
Hi,
Yes, you can.
What firmware do you have, and what firmware do you want to flash?
Sent telepathically from my pyramid
Hi to flash firmware I usually put the firmware on the root of my sd card and flash from bootloader by pulling battery putting battery back in, pressing volume and power at the same time, the device will recognise the update and ask to continue, press power for yes. Once it's updated don't forget to REMOVE the pg58img file from the sd card or it will continue to try to update over and over . So when its finished just delete the file of your sd card. I use a card reader to do this. I just pop out my sd put into card reader and plug into computer and delete the file then put card back into device . But if you don't have a card reader its ok just delete the file however you can. Then your good to go. Hope this helps some . This is how I do my firmware. Best wishes.
Sent from my Sensation Z710e using xda premium
Do I have to be S-OFF to flash these two updates? I'm htcdev unlocked but S-ON and I don't want the wire trick s-off.
tried flashing radio in recovery, by installing the PG zip file but got installation aborted.
STk3000 said:
Do I have to be S-OFF to flash these two updates? I'm htcdev unlocked but S-ON and I don't want the wire trick s-off.
tried flashing radio in recovery, by installing the PG zip file but got installation aborted.
Click to expand...
Click to collapse
yep for radio and hboot change you require SOFF ..when you are SON but HTC-DEV unlocked ..you can only change roms and recovery ..you cant modify firmware
so that's why it would not work... i'll stick with s-on for now since 3.32 works fine for me for all roms... ill get soff when most roms will reqire newer firmware... i dint really wanna do wire trick to get full root.. is there another way of getting this on 1.27 hboot? Thx ganesh..
Sent from my HTC Sensation using xda app-developers app
Hboot radio
Rather than start a new thread I thought I would just expand this one.
My query is:
Bootloader on my phone is showing
HBOOT 1.27.1100
RADIO 11.24A.3504.31_M
(Rev S-OFF) got this from flashing universal 3.33 by mike
I wanted to know is this the latest radio I need for jellybean roms? I am having the Wi-F- turning on issues
I see some of them mention Radio_11.76A? Is this the full name for the radio above?
I have pushed this through Fastboot ADB so am I on the right one?
I have also pushed the Boot.img from each rom and updated to Faux latest kernels but none of this seems to solve the wifi issues
Andy--T said:
Rather than start a new thread I thought I would just expand this one.
My query is:
Bootloader on my phone is showing
HBOOT 1.27.1100
RADIO 11.24A.3504.31_M
(Rev S-OFF) got this from flashing universal 3.33 by mike
I wanted to know is this the latest radio I need for jellybean roms? I am having the Wi-F- turning on issues
I see some of them mention Radio_11.76A? Is this the full name for the radio above?
I have pushed this through Fastboot ADB so am I on the right one?
I have also pushed the Boot.img from each rom and updated to Faux latest kernels but none of this seems to solve the wifi issues
Click to expand...
Click to collapse
yep you have proper radio (or rather you can check it in settings -> about- phone -> baseband )
try some sense rom and see whether you got any wifi error or not
ganeshp said:
yep you have proper radio (or rather you can check it in settings -> about- phone -> baseband )
try some sense rom and see whether you got any wifi error or not
Click to expand...
Click to collapse
I have tried flashing ARHD and Ordroid 9 again but same issues even after superwipe and formatting SD card (full format on windows not quick)
Loads of posts about these wifi issues - Only occured whenever I flashed latest Viper ROM but thats just me, others getting them on other roms mainly ICS / Jellybean
Andy--T said:
I have tried flashing ARHD and Ordroid 9 again but same issues even after superwipe and formatting SD card (full format on windows not quick)
Loads of posts about these wifi issues - Only occured whenever I flashed latest Viper ROM but thats just me, others getting them on other roms mainly ICS / Jellybean
Click to expand...
Click to collapse
As long as the radio starts with 11 (11.24A, 11.76A etc) it is ICS compatible
I would still update to the latest radio (11.76A) available here: http://forum.xda-developers.com/showthread.php?t=1202867
And then do a full wipe of all partitions through 4EXT (don't use superwipe, causes problems) and reinstall ARHD.
krazykipa said:
As long as the radio starts with 11 (11.24A, 11.76A etc) it is ICS compatible
I would still update to the latest radio (11.76A) available here: http://forum.xda-developers.com/showthread.php?t=1202867
And then do a full wipe of all partitions through 4EXT (don't use superwipe, causes problems) and reinstall ARHD.
Click to expand...
Click to collapse
he is having 11.76A Radio only ..in bootloader only the last part of the radio name is shown ..(for full name of RADIO ..check the Radio/Ril thread you've linked )
in settings ->about phone ->software info->baseband ..complete radio name will be shown (this path is for sense roms ..and it might be same for AOSP/CM9/CM10 roms too i think)
ganeshp said:
he is having 11.76A Radio only ..in bootloader only the last part of the radio name is shown ..(for full name of RADIO ..check the Radio/Ril thread you've linked )
in settings ->about phone ->software info->baseband ..complete radio name will be shown (this path is for sense roms ..and it might be same for AOSP/CM9/CM10 roms too i think)
Click to expand...
Click to collapse
Serves me right for skimming
Thanks guys
WiFi is on but disconnects after a few mins inactivity
Have to switch it off and back on again to pick up the connection again
It authenticates and connects then disconnects after a short period of time
At least Im getting somewhere
Currently on latest CM10 Kang ROM (14 Aug b version)
found here http://forum.xda-developers.com/showthread.php?t=1782009

Categories

Resources