[Q] Lower resolution - darker video recording output - Samsung Galaxy SL i9003

So I noticed, that the lower resolution you set on the video recorder, the darker the video output gets. On 720x480 and lower resolutions the recording in dark(er) areas becomes useless. Though when you set 1280x720 and contrast to -2, it becomes just a bit more usable. I'm using XKPH, and I'm wondering is this fixed in later versions? Or maybe someone could look into this and try to find a fix, or port an older version of the camera (it seems that there was no such problem in froyo).

Same problem here. No fix in later version xxkpq or no patch/mod else where. I tried camera.apk from xxkb3 but it didn't work. So for now we are struck with this buggy video recording. Froyo's recording was way better.

ya many times I also faced this problem.

same here ! if u notice the fps limit is in from the latest versions of firmwares ! on kpe it works fine ! but when u go above kpe u'll experience that the video fps is min to 30 fps eaelier ths used to go down till 15 fps

shriomman said:
same here ! if u notice the fps limit is in from the latest versions of firmwares ! on kpe it works fine ! but when u go above kpe u'll experience that the video fps is min to 30 fps eaelier ths used to go down till 15 fps
Click to expand...
Click to collapse
Hoe to check the FPS of shot video?

I solved it !
I was using KPQ for 2 months. My camera was like that.
And today i found the solution accidentally.
For preparation:
* I made a factory reset.
* Restarted
* Turned off
* Open in CWM (Volume up + Power + Home)
* Wiped data and other caches
* Restarted and opened again in CWM.
* And wiped again. (Because there was some errors previous one)
Now this is the solutuon i think :
* I flashed KPE ( twice )
* After this i flashed KPH ( twice )
* Finally i flashed KPQ ( twice )
* Rooted
* Deodexed
* Flashed UC Kernel
Then it solved.

kanitkaplan said:
I solved it !
I was using KPQ for 2 months. My camera was like that.
And today i found the solution accidentally.
For preparation:
* I made a factory reset.
* Restarted
* Turned off
* Open in CWM (Volume up + Power + Home)
* Wiped data and other caches
* Restarted and opened again in CWM.
* And wiped again. (Because there was some errors previous one)
Now this is the solutuon i think :
* I flashed KPE ( twice )
* After this i flashed KPH ( twice )
* Finally i flashed KPQ ( twice )
* Rooted
* Deodexed
* Flashed UC Kernel
Then it solved.
Click to expand...
Click to collapse
that seriously solved the issue for u man ? any1 tried this ??

kanitkaplan said:
I solved it !
I was using KPQ for 2 months. My camera was like that.
And today i found the solution accidentally.
For preparation:
* I made a factory reset.
* Restarted
* Turned off
* Open in CWM (Volume up + Power + Home)
* Wiped data and other caches
* Restarted and opened again in CWM.
* And wiped again. (Because there was some errors previous one)
Now this is the solutuon i think :
* I flashed KPE ( twice )
* After this i flashed KPH ( twice )
* Finally i flashed KPQ ( twice )
* Rooted
* Deodexed
* Flashed UC Kernel
Then it solved.
Click to expand...
Click to collapse
Umh?
I tried those..
Flashing and stuff.
Long back.
And, For your confirmation, I tried it today also
Did not work.
Infact, no difference at all.

Fixed this issue link ->
http://forum.xda-developers.com/showthread.php?t=1583259

Related

[ROM]iCyan0x00 Sense (09-22-2010) "Flash = iCyan0x00 Lover..."

iPhone UI + Hero UI + Sense == iCyan0x00 LOVE
"[email protected]#*..."
iCyan0x00 ROM's
[*] Froyo Thread
[*] Eclair Thread
[*] Espresso Thread
[*]
CREDITS:
- CyanogenMod
- Wallpapers
- Firerat
- ctbeiser
- Barely Blurred
- kingklick92
- sparksco
- jcarrz1
- joshladella005
- Star Wars Main Title & A Galaxy Divide
- ElegantSteel Alpha1 - VE 5.0 by ebupof
- Minimal Matte 1.5 by shiftedx(Phone Application)
- ME
CHANGELOG:
Sense
[X] Fixed Sense fail to response to wake sometimes
[X] Sense bluetooth is not working
[X] Fixed most FC's on Sense
[X] Removed LatinIME Sense
[X] Added HTCIME Sense/Espresso
[X] Changed boot screen
[X] Trimmed some space
[X] Fix FC's for dialer
[X] Added Swype, Genius Button, Visual Voice Mail, etc.
SCREENSHOTS:
- iCyan0x00 Slideshow
- Picasaweb iCyan0x00
NOTE:
- Sense ROMs Will Take more or less 30 mins for you to get its going.
- On Sense, press and hold the home buttom a minute or so after the first boot.
- You will NEED SD-EXT IF YOU WANT ALL THEY APPLICATIONS, jush pm me with your app and i'll make an flashable zip for you
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
BUGS:
- Sense log
INSTRUCTIONS:
- First time flashing iCyan0x00?
1. Root your device and install Recovery
2. Do a Nandroid backup!
3. Install the Radio/SPL if you don't already have it
4. Make 512MB-EXT/96-SWAP/*-FAT32
5. WIPE/EXT/CACHE (cannot guarantee it will work) also in Terminal use code below
Code:
su
reboot recovery
nandroid-mobile.sh -b
mount system
mount userdata
rm -rfv /system/*&&rm -rfv /data/*
umount -a
reboot recovery
6. Install/Flash the ROM
7. Test Adobe Flash Here
DOWNLOADS
LATEST
- iCyan0x00-Sense CRC-32: 0930894c
OLD
- iCyan0x00-Sense CRC-32: ea6038d0
DEAD
- iCyan0x00-Sense
In The Grave
-
One With Nature/Dust
-
is this for HTC magic 32B?
which cyanogen ROM is used in this built?
Megaupload blocked here...anyother mirror please
I'm kinda stuck at splash1 - is that the 30min waiting game you were talking about?
EDIT: Logcat just got going... let's see how this turns out (still @ splash1).
EDIT2: Just entered my PIN, still loading and a lot of error messages. My LED doesn't work and the BatteryService seems to be broken.
Currently stuck at "Loading... It may take several minutes to complete, please wait."
EDIT3: com.htc.launcher FC loops
E/dalvikvm( 3507): Unable to open stack trace file '/data/anr/traces.txt': Permi
ssion denied
Click to expand...
Click to collapse
hi,will this version be updated soon?This version can't play music,and the ringtone is not working
Htc Magic 32b. Installed this rom but after reboot it maintains on vodafone screen and nothing happens. Wiped all. Tried with a new and formated sdcard and nothing. Can someone send me a link with a backup nandroided?
Mate this is awesome! Really!!!
Just one question/issue: I'm experiencing a problem with some HTC Widget. I can't set my city (in Italy), I try to write it but nothing happen....I need to push a search button?? but where?!?! If search is automatic is not working at all for me....any help?!
So i have the +15MB ram and all and ill OC to 614 should this rom be fast because i love it its jsut slow
夜阑听风 said:
hi,will this version be updated soon?This version can't play music,and the ringtone is not working
Click to expand...
Click to collapse
i have same paroblem..and always loading some thing after reboot...its said It May Take Several Minute To Complete.please wait..!! any solution??
I flashed this ROM today, and i had a few problems.
1) the biggest one was that i had no data. i was connected to a Tmo network, and i always get GPRS service there, but all i had was 4 bars. not even an Edge logo up there. so i couldnt access market or browse the web or anything.
2) my contacts wouldnt sync. this might be due to the data issue, but i didnt have any contacts.
i went back to CM6.1 RC1 until such a time that these problems are fixed. it's really a good ROM. it felt really good to have Sense on my G1 again. it was fast, usable, and come on, it's a Sense Froyo ROM. what's not to like?
Very nice rom! I have had a couple reboots when the screen is off though.
Mytouch 1.2
2708 Radio
I think I traced the random reboots to 614mhz default cpu clock.
I have upgraded my g1's radio with ...27.08 and latest spl .13d and downloaded preshoot kernel I think.
icynooxo sense get installed and worked when I tried to install applications in it installation process failed.
with ever app samething happened so I tried using adb install still same problem plz help
Its my first time I have installed sense rom
Sorry for bad English
Sent from my HTC Dream using XDA App
Pretty good but the iphone icons burn my eyes.
i hate to be the one to ask since im sure you worked hard on this rom but is there anyway to just install the normal sense icons? the rom seems really awsome but why iphone icons? thats like a chevy with a ford sticker on the back. but other than tht looks awsome, cant wait to try
Cant connect my G1 to the computer thru the USB...
Im trying to re flash the rom after another wipe since alot of things arent working ie:
Sense Widgets
Mobile connection (internet , market)

[ROM][4.4.2]★VIBE UI 2.0

Here is My Next Rom for Mmx A117
VIBE UI 2.0
PHP:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.[/COLOR]
*/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
* Full Multilanguage
* Random Reboot Fixed
* After calls freeze Fixed
* Smoothness added
* Fast,stable and Fluid Ui
* Partitions Fixed
* GPS Tweks
* BT Tweks
* Pre-Rooted
* Brighter Flashlight
* Brighter Camera Flash
* Themes Supported
* Battery Tweaks Added
*Optimized speed and WiFi
*Globa style theme
*Optimized GPS, speed up positioning speed
*Touch effect optimization
*Optimized CPU running
*Deodex
*Optimized memory management
*Optimized network
*Optimized battery power
*Zipaliagned*
*Improve picture quality and Camera quality
*Unlocked FPS, improving 2D / 3D performance
* Many More....
And Lots Of Stuff I Dont Remember Now
Screenshots
HERE
Bugs-
Post If u find any
Download Link
See Post No. 2 below
Installation(read it)
1. Place downloaaded rom zip into root of sd.
2. wipe data, cache , dalvik cache using custom recovery
3. select install zip from sd and select rom zip .
4. Before first boot install rootfix zip.
4. reboot and enjoy
Credits
@asainiboy (Me)
@SuperMan(Alex)
AND SPECIAL THANKS TO AMIT AND PINTO THAKUR
Give Feedbacks For This Rom Thank You !!
Leave a THANK. It will Motivate me.
XDA:DevDB Information
[ROM][4.4.2]★VIBE UI 2.0, ROM for the Micromax Canvas Magnus A117
Contributors
asainiboy
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2015-03-28
Last Updated 2015-03-28
Downloads
Downloads:
1. Vibe UI 2.0
2. ROOT FIX ( Flash Immediately after flashing rom)
asainiboy said:
Here is My Next Rom for Mmx A117
VIBE UI 2.0
PHP:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.[/COLOR]
*/
* Full Multilanguage
* Random Reboot Fixed
* After calls freeze Fixed
* Smoothness added
* Fast,stable and Fluid Ui
* Partitions Fixed
* GPS Tweks
* BT Tweks
* Pre-Rooted
* Brighter Flashlight
* Brighter Camera Flash
* Themes Supported
* Battery Tweaks Added
*Optimized speed and WiFi
*Globa style theme
*Optimized GPS, speed up positioning speed
*Touch effect optimization
*Optimized CPU running
*Deodex
*Optimized memory management
*Optimized network
*Optimized battery power
*Zipaliagned*
*Improve picture quality and Camera quality
*Unlocked FPS, improving 2D / 3D performance
* Many More....
And Lots Of Stuff I Dont Remember Now
Screenshots
HERE
Bugs-
Post If u find any
Download Link
See Post No. 2 below
Installation(read it)
1. Place downloaaded rom zip into root of sd.
2. wipe data, cache , dalvik cache using custom recovery
3. select install zip from sd and select rom zip .
4. Before first boot install rootfix zip.
4. reboot and enjoy
Credits
@asainiboy (Me)
@SuperMan(Alex)
AND SPECIAL THANKS TO AMIT AND PINTO THAKUR
Give Feedbacks For This Rom Thank You !!
Leave a THANK. It will Motivate me.
XDA:DevDB Information
[ROM][4.4.2]★VIBE UI 2.0, ROM for the Micromax Canvas Magnus A117
Contributors
asainiboy
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2015-03-28
Last Updated 2015-03-28
Click to expand...
Click to collapse
Battery Drain ???
Great Rom with Awesome Features!
Kudos :thumbup:
Xposed Installer Working!
OTG and Wireless Display Working too!
Sent from my Lenovo P780 using XDA Free mobile app
Bro is battery Draining there?
uchihaobito said:
Bro is battery Draining there?
Click to expand...
Click to collapse
Not Much!I got 3 Hours 55 Minutes sot on Single charge
Sent from my Lenovo P780 using XDA Free mobile app
SuperMan(Alex) said:
Not Much!I got 3 Hours 55 Minutes sot on Single charge
Sent from my Lenovo P780 using XDA Free mobile app
Click to expand...
Click to collapse
How would you explain your battery usage time ???
ROM looks are very good.
Battery dropped from 70% to 20% from night to morning without installing any apps,no wifi.
USB OTG not working.
RAM usage is very high.
VIBE lockscreeen is amazing.
TY
Plz help
Just installed this rom.. Reduced brightness level. Screen went black. What should i do now? Tried to get into recovery mode but no use.. Plz help me. Thx
prasadbbn said:
Just installed this rom.. Reduced brightness level. Screen went black. What should i do now? Tried to get into recovery mode but no use.. Plz help me. Thx
Click to expand...
Click to collapse
Hold Volume Up button dor 7+seconds!
Sent from my Micromax A117 using XDA Free mobile app
Look was completely different and awesome. Nice and smooth. Camera is 8MP and battery draining too fast are the issues that i have noticed.
Edit:
By the way i didnt understand one thing.
Previously on all the custom roms i didnt face this sort of problem. I installed your rom and next day morning ( today morning) i tried to install some other ROM (just changed it due to heavy battery draining issue). The device never went into recovery mode. it kept on restarting and opening my desktop as a normal bootup. I had flashed stock V4 and then i was able to get recovery mode.
Any answer for this issue.
Solution to your answer.
AnilLonely said:
Look was completely different and awesome. Nice and smooth. Camera is 8MP and battery draining too fast are the issues that i have noticed.
Edit:
By the way i didnt understand one thing.
Previously on all the custom roms i didnt face this sort of problem. I installed your rom and next day morning ( today morning) i tried to install some other ROM (just changed it due to heavy battery draining issue). The device never went into recovery mode. it kept on restarting and opening my desktop as a normal bootup. I had flashed stock V4 and then i was able to get recovery mode.
Any answer for this issue.
Click to expand...
Click to collapse
Hi..
Here, the rom has no recovery.
1. Download any latest custom recovery.
2. Install Mobile Uncle Tools (MUT) app.
3. Update recovery via MUT.
Voila!!! Done...
nikhilghuge10 said:
Hi..
Here, the rom has no recovery.
1. Download any latest custom recovery.
2. Install Mobile Uncle Tools (MUT) app.
3. Update recovery via MUT.
Voila!!! Done...
Click to expand...
Click to collapse
Using latest Philz recovery. Still same issue. DO you mean to say custom Kernal? if so i tried installed "Xtreme Sandy Kernel" from Santosh M. No use either.
Installed the rom but language problem
Hi I have installed this ROM just now. Experience is almost like original Lenovo Vibe UI although it is not as smooth but acceptable.:good::good:
I choose Language as English but most of its applications are in Chinese language any solution for that?
Other than that everything seems nice.
Will post further experience while using it for a while.
Thanks.
Philz recovery not working
After installing ROM I checked for software update and it was showing me an update while installing update Mobile wasn't rebooting into recovery mode. So i installed Philz recovery using MobileUncle and booted into recovery. Now I am unable to boot android every time I reboot mobile it enters into Philz recovery. How to fix this?
please help me fixing my phone
Hi, I flashed Vibe ui 2.0 rom yesterday. And there wasn't any recovery on that ROM so I tried Philz recovery after that my phone started booting into recovery every time.
So I fashed the same ROM again. To test which recovery will work properly I tried CWM recovery. After that my phone is stuck in bootloop.
It just show Lenovo and Android icon and than restarts.
Tried to go in recovery by pressing Volume up + Power key doesn't work. Pressing Volume Up + Volume Down + power shows two option
Volume up - Recovery Mode
Volume down - Factory Mode
Click on any option again starts rebooting.
Trying to connect phone to laptop but it even starts rebooting on connecting. So SpFlash Tool is not able to do its work.
Fastboot is also not detecting the phone.
I tried installing USB driver but it says can't be done because driver misses digital signature.
Please suggest me some solution by which I can flash stock ROM or boot into recovery so that I can restore my Backup
amitr1sharma said:
Hi, I flashed Vibe ui 2.0 rom yesterday. And there wasn't any recovery on that ROM so I tried Philz recovery after that my phone started booting into recovery every time.
So I fashed the same ROM again. To test which recovery will work properly I tried CWM recovery. After that my phone is stuck in bootloop.
It just show Lenovo and Android icon and than restarts.
Tried to go in recovery by pressing Volume up + Power key doesn't work. Pressing Volume Up + Volume Down + power shows two option
Volume up - Recovery Mode
Volume down - Factory Mode
Click on any option again starts rebooting.
Trying to connect phone to laptop but it even starts rebooting on connecting. So SpFlash Tool is not able to do its work.
Fastboot is also not detecting the phone.
I tried installing USB driver but it says can't be done because driver misses digital signature.
Please suggest me some solution by which I can flash stock ROM or boot into recovery so that I can restore my Backup
Click to expand...
Click to collapse
flash stock rom using sp flash tools. connect ur phone to laptop with battery removed and then flash
thanks for the help. I got it working. I was missing few points ie. removing battery, usb driver installation process wasn't proper.
I loved this ROM a lot. Its completely different from any regular ROM. Loved every piece of it. Faced few major issues thats why unwantedly had to flash the Stock rom.
There are lots and lots of good things to write about so writing only the problems
* Battery issue : Battery backup wasn't good.
* Heating : Without any usage mobile gets heated up so much even much more than when I play games for 1 hr.
* Recovery not supported.
* High RAM usage : even Antutu benchmark stopped while calculating the numbers.
Will definitely install it if these issues are fixed.
Wanted to say thanks to developer for great effort.
AnilLonely said:
Look was completely different and awesome. Nice and smooth. Camera is 8MP and battery draining too fast are the issues that i have noticed.
Edit:
By the way i didnt understand one thing.
Previously on all the custom roms i didnt face this sort of problem. I installed your rom and next day morning ( today morning) i tried to install some other ROM (just changed it due to heavy battery draining issue). The device never went into recovery mode. it kept on restarting and opening my desktop as a normal bootup. I had flashed stock V4 and then i was able to get recovery mode.
Any answer for this issue.
Click to expand...
Click to collapse
i also has same problem
solution
amitr1sharma said:
After installing ROM I checked for software update and it was showing me an update while installing update Mobile wasn't rebooting into recovery mode. So i installed Philz recovery using MobileUncle and booted into recovery. Now I am unable to boot android every time I reboot mobile it enters into Philz recovery. How to fix this?
Click to expand...
Click to collapse
Try flashing stock ROM using
Mtk flash tools
After the flashing is done
Root ur phone
Install mobile uncle tool and flash the old working recovery....
Hope it helps...

[Fix] [Mt6582 kk] 3G Only Mode , Lock Screen , Proximity Invalid IMEI And Nvram

You're warranty is now void.
Please Read entire Post . . . . . .
Disclaimer . . .
* Remember That flashing Rom can be dangerous to Your Devices .
I take no responsibility for any damages that can happen to your Device.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
*Please do some research if you have any concerns about features inc[/B]included in this ROM
* before flashing it! YOU are choosing to these modifications, and if
* you point the finger at me for messing u make p your device, I will laugh at you
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Fixes tested On Wiko Rainbow - My|Phone Agua rio - Qmobile - For All clones Also For all my Roms
--IMEI And Nvram Fix Installation
*Boot into Recovery
*Find The Imei Fix in A folder
*Wipe Cache (Optional)
* Script Will do all the Things
--Must have
*Custom Recovery
*Busy Box installed
Link : https://www.androidfilehost.com/?fid=24391638059057915
-- Nvram Fix
*Boot Into Recovery
*Find The Nvram Fix In a Folder
Link - https://www.androidfilehost.com/?fid=24391638059057922
-- Lock Screen Fix
-Boot on to Recovery
*Find Screen Lock Fix To a folder
*Fix For
*Face Unlock
*Voice Unclock
*Pattern
*Pin
*Password
-MUst be on
*Custom Recovery
*Busy Box installed
LINK - https://www.androidfilehost.com/?fid=24391638059057922
°Proximity Fix°
*Boot Into Recovery
*Install Proximity Fix In a Folder
*And Reboot !
LINK - https://www.androidfilehost.com/?fid=24438995911974250
---3G Fix Installation
*Run mauimeta 3g tool
*From options select connect smartphone in meta mod
*Press reconnect
*Switch off your phone and connect it to usb. the phone will boot up and stuck on bootLogo
*Now select update parameter from the drop down menu,a popup will appear
*click on change nvram database and select the modem File
*click on load from file and select the ini file
*wait for sometime the barcode check box on below will be automatically checked and will display a message load from file completed
*now click on downlaod to flash,after sometime it will show download to flash completed. now close the popup and press disconnect.
*Phone will turn off. then exit the software and power on the device
Links
*MauiMETA3g EXE.
https://onedrive.live.com/?id=8F11D...d=root&authkey=!AL4F8u9jj3tepio&action=locate
*Tinno Driver FoR wiko Rainbow Clones Only.
https://drive.google.com/file/d/0B1UbNaWJbFYVQThmVFI2cnA0RnM/view?usp=docslist_api
*Auto Drivers https://drive.google.com/file/d/0B1UbNaWJbFYVNEo3RU82MG5uaGs/view?usp=docslist_api
*3G Fix Files https://drive.google.com/file/d/0B1UbNaWJbFYVRUFXWXhLWWc4VWs/view?usp=docslist_api
​
NOTE:
If this Fix Work Do Hit Thanks button and if it's possible buy a coffee for me,it will help me to work, support and keep those Incoming Fixes up to date
Me (Ako Si Ken)
https://m.facebook.com/rkmagno?ref=bookmarks
Big thanks To :
MtkDroidTools
Google
Xda
Samsara @Santosh For .ini Files
My Team https://m.facebook.com/AndroidDevelopmentPortingTeam Please Like Us
Wow.. But i don't know this is for which file and for what??
Like i have note 2 which is pretty messed up. I lost my imei and have problem with efs.
Do u want to say that if i flash this file then i will get imei.?
Bcz i dont think that's possible without z3x box.
Sent from my A0001 using Xparent BlueTapatalk 2
Actually this for all clone Like My|Agua rio , qmobile, wiko Rainbow and fresh .
Sent from my A680 using XDA Free mobile app
Is the imei and nvram permanent?
---------- Post added at 04:39 PM ---------- Previous post was at 04:36 PM ----------
Or i need to apply it again after doing factory reset or flahing a new rom
I already fixed my invalid imei using mauimeta and nvram database file,
I just want to know if the fix you provided is temporary or permanent so the next time i accidentally destroyed my nvram partition, i will be able to flash this to fix it permanently again,
Yes its permanent but if you lose your baseBand it will not fix Imei (only nvram)
Sent from my A680 using XDA Free mobile app
Thank you for your response
kenzukie said:
You're warranty is now void.
Please Read entire Post . . . . . .
Disclaimer . . .
* Remember That flashing Rom can be dangerous to Your Devices .
I take no responsibility for any damages that can happen to your Device.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
*Please do some research if you have any concerns about features inc[/B]included in this ROM
* before flashing it! YOU are choosing to these modifications, and if
* you point the finger at me for messing u make p your device, I will laugh at you
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Fixes tested On Wiko Rainbow - My|Phone Agua rio - Qmobile - For All clones Also For all my Roms
--IMEI And Nvram Fix Installation
*Boot into Recovery
*Find The Imei Fix in A folder
*Wipe Data and Cache (Optional)
*Install And Script Wil all the Things
*Enjoy !
--Requirements
*Custom Recovery
*Busy Box installed
Link : https://drive.google.com/file/d/0B1UbNaWJbFYVV1d0aWNka1dScnc/view?usp=docslist_api
-- Nvram Fix Only
*Boot Into Recovery
*Find The Nvram Fix In a Folder
*Install Done!
-No Requirements Required Just install
Link -
https://drive.google.com/file/d/0B1UbNaWJbFYVekxRWXNBaWk3V3c/view?usp=docslist_api
--Screen Lock Fix Installation
-Boot on to Recovery
*Find Screen Lock Fix To a folder
*Install You're Done
*Enjoy
-Fix For
*Face Unlock
*Voice Unclock
*Pattern
*Pin
*Password
-Requirements
*Custom Recovery
*Busy Box installed
Link - https://drive.google.com/file/d/0B1UbNaWJbFYVS09JSnJNQ3llSGs/view?usp=docslist_api
---3G Fix Installation
*Run mauimeta 3g tool
*From options select connect smartphone in meta mod
*Press reconnect
*Switch off your phone and connect it to usb. the phone will boot up and stuck on bootLogo
*Now select update parameter from the drop down menu,a popup will appear
*click on change nvram database and select the modem File
*click on load from file and select the ini file
*wait for sometime the barcode check box on below will be automatically checked and will display a message load from file completed
*now click on downlaod to flash,after sometime it will show download to flash completed. now close the popup and press disconnect.
*Phone will turn off. then exit the software and power on the device
Links
*MauiMETA3g EXE.
https://onedrive.live.com/?id=8F11D...d=root&authkey=!AL4F8u9jj3tepio&action=locate
*Tinno Driver FoR wiko Rainbow Clones Only.
https://drive.google.com/file/d/0B1UbNaWJbFYVQThmVFI2cnA0RnM/view?usp=docslist_api
*Auto Drivers https://drive.google.com/file/d/0B1UbNaWJbFYVNEo3RU82MG5uaGs/view?usp=docslist_api
*3G Fix Files https://drive.google.com/file/d/0B1UbNaWJbFYVRUFXWXhLWWc4VWs/view?usp=docslist_api
​______________________________________________________________________
It Took Times 3Days and 5hours To collect All Data And write This Thing
I didn't Eat or Drink Water Properly ,I didn't sleep Properly I made This
Just For All of You ,I work Day and night To learn More And more !
_________________________________________________________________
NOTE:
If this Fix Work Do Hit Thanks button and if it's possible buy a coffee for me,it will help me to work, support and keep those Incoming Fixes up to date
Credits :
Me (Ako Si Ken)
https://m.facebook.com/rkmagno?ref=bookmarks
MtkDroidTools
Adpt
Google
Xda
Yoshiko
Samsara @Santosh For .ini Files
My Team https://m.facebook.com/AndroidDevelopmentPortingTeam Please Like Us
Click to expand...
Click to collapse
Yep woking all.. Tested on my canvas fire 2
Hi kenzukie, thanks for all the work and the info, It has been of unmeasurable utility!
The problem I'm having is this: I'm having 3G signal issues on my BLU Studio 5.0C HD. I've already tried NVRAM fix, tried also flashing modem relevant files from a working identical phone (https://mega.nz/#F!gMQS2Lyb), and even tried Maui Meta 3G (images attached).
The problem now is really bothering in LP and has worsten: the band available are no longer the stock bands the phone supported. Is this expected from the official Wiko Rainbow LP Rom? Are there any other variants of the ROM, which include variants of the Baseband, so I can try to apply them with Maui Meta?
As always, thanks for all the hard work, keep it coming!
Link: files I used to apply modem from recovery
lautit said:
Hi kenzukie, thanks for all the work and the info, It has been of unmeasurable utility!
The problem I'm having is this: I'm having 3G signal issues on my BLU Studio 5.0C HD. I've already tried NVRAM fix, tried also flashing modem relevant files from a working identical phone (https://mega.nz/#F!gMQS2Lyb), and even tried Maui Meta 3G (images attached).
The problem now is really bothering in LP and has worsten: the band available are no longer the stock bands the phone supported. Is this expected from the official Wiko Rainbow LP Rom? Are there any other variants of the ROM, which include variants of the Baseband, so I can try to apply them with Maui Meta?
As always, thanks for all the hard work, keep it coming!
Link: files I used to apply modem from recovery
Click to expand...
Click to collapse
i tried 3g fix in official lollipop is working all you need todo is use stock Lp BPLGUinfo*** and update parameter ?
How to fix cid?

[ROM][XC][O][8.1][UNOFFICIAL]Paranoid Android 8.0.0-DEV

Obligatory disclaimer:
Code:
[SIZE="1"]/* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/SIZE]
Preface:
Thanks in no small part to the awesome help from Tim Graham of the AOSPA-team, I was able to compile an unofficial build of Paranoid Android 8.0.0-DEV (Android 8.1)
for the Sony Xperia X Compact (kugo/f5321). I've been using it for a couple of days now without running into any (rom-specific) issues yet.
I've asked Tim if he didn't mind me posting the rom here and he gave the go ahead. So here we go!
Installation instructions:
* Backup important files beforehand just in case something goes awry.
* Wipe System, Cache and Data.
* Install zip-file with TWRP.
* Unzip and then flash Sony's ODM-image (v15) to the oem-partition using fastboot:
Code:
fastboot flash oem SW_binaries_for_Xperia_Android_8.1.6.4_r1_v15_loire.img
What works:
* Data (2G/3G/4G/LTE)
* Wifi
* GPS
* Encryption
* Bluetooth
* Fingerprint sensor
* Camera
* Torch
* GApps (Open GApps 8.1 pico)
* Magisk (16.4)
Known issues:
* Boot animation is partly distorted (Needs to be addressed by Sony)
* Night Mode doesn't work (Needs to be addressed by Sony)
* The occasional battery drain (Same as with other custom oreo roms. Mine seem prevalent whenever cell reception is spotty)
If you come across any bugs, please feel free to report them here. I am not the developer, but our feedback might contribute to making a better eventual official version of this ROM.
Download:
https://androidfilehost.com/?w=files&flid=269311
harryharryharry said:
Obligatory disclaimer:
Code:
[SIZE="1"]/* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/SIZE]
Preface:
Thanks in no small part to the awesome help from Tim Graham of the AOSPA-team, I was able to compile an unofficial build of Paranoid Android 8.0.0-DEV (Android 8.1)
for the Sony Xperia X Compact (kugo/f5321). I've been using it for a couple of days now without running into any (rom-specific) issues yet.
I've asked Tim if he didn't mind me posting the rom here and he gave the go ahead. So here we go!
Installation instructions:
* Backup important files beforehand just in case something goes awry.
* Wipe System, Cache and Data.
* Install zip-file with TWRP.
* Unzip and then flash Sony's ODM-image (v11) to the oem-partition using fastboot:
Code:
fastboot flash oem SW_binaries_for_Xperia_Android_8.1.6.4_r1_v11_loire.img
What works:
* Data (2G/3G/4G/LTE)
* Wifi
* GPS
* Bluetooth
* Fingerprint sensor
* Camera
* Torch
* GApps (Open GApps 8.1 pico)
* Magisk (16.4)
Known issues:
* Boot animation is partly distorted (Needs to be addressed by Sony)
* Night Mode doesn't work (Needs to be addressed by Sony)
* The occasional battery drain (Same as with other custom oreo roms. Mine seems prevalent whenever cell reception is spotty)
If you come across any bugs, please feel free to report them here. I am not the developer, but our feedback might contribute to making a better eventual official version of this ROM.
Download:
https://androidfilehost.com/?w=files&flid=269311
Click to expand...
Click to collapse
Thanks for keeping XC alive. I haven't been too interested in Android since finding Sailfish, (especially since there's been so little activity here), but might bounce back to check this out.
Has anyone already testet whether Car Bluetooth is working? Does encryption work?
Thanks for any replies in advance.
Encryption works. I can't say for sure car bluetooth works. The bluetooth devices I use (heart rate monitor and earbuds) do work though.
harryharryharry said:
Encryption works. I can't say for sure car bluetooth works. The bluetooth devices I use (heart rate monitor and earbuds) do work though.[/QUOTE
very good!!
Click to expand...
Click to collapse
Thread cleaned.
:good:
When tried to flash with TWRP (wiped everything beforehand), got the following error:
Updater process ended with ERROR: 7
Error installing zip file '/sdcard1/pa_kugo-8.0.0-
DEV-20180507.zip'
Anyone know why this is happening?
Looks like the error is caused by the installation script checking if the rom is suitable for your device and concluding it isn't. What device are you flashing the rom to ?
Is the ROM source private?
No, the source is publicly available on github: https://github.com/AOSPA/manifest
NB: If anyone else is having problems with this rom, your best bet is to try the official rom - which I just saw has been released the 22nd of august:
http://get.aospa.co/official/kugo
I haven't tested the rom myself, but I'm willing to say it's the better choice overall since it is built more recently and therefore probably has a more up to date security patch level and so on.
harryharryharry said:
Looks like the error is caused by the installation script checking if the rom is suitable for your device and concluding it isn't. What device are you flashing the rom to ?
Click to expand...
Click to collapse
X Compact. The device it was supposed to be flashed on.
Hmm, that's strange. I think if you want to try out Paranoid Android, you're better off trying the official rom (which has been released a couple of days ago). If the same error message appears, all I can think of is maybe TWRP somehow doesn't report the correct brand/model of the phone..
Official rom looks good too.
I can't open my camera app. I'm using the official rom. Someone has this problem too?
Yes also the case for me (the screen stays black until I close the camera app), this wasn't the case with my unofficial build of the rom (although I tested with a much older version of the oem partition - I think version 11).
I'm not on the rom anymore because it was generally laggy and no music app would play music. I didn't bother to investigate further because for me the music app is pretty much essential in daily use and just needs to work.
If you want this worked out, your best bet is to contact the developers of the rom at their google plus page:
https://plus.google.com/communities/112514149478109338346
and under 'bug reports' provide them with a log (for example with matlog) for them to dissect.
Hi,
I habe recently flashed the official OA1 ROM of Paranoid Android for my Xperia X Compact and after it finally worked and it had booted I noticed some difficulties with the Bluetooth. It stops submitting the sound to various Bluetooth devices (headphone, music box) where this never happened before. (Side note: the 7.1.3. Official PA ROM features no bluetooth at all, at least not on my device.) Sometimes even the Bluetooth deactivated itself fully. After turning it back on, it would pair again but mostly after a few seconds stop delivering the sound to the devices. Is there a way to fix it? I'd love to hear your ideas to it.
Best
Calumet27
---------- Post added at 01:39 PM ---------- Previous post was at 01:23 PM ----------
harryharryharry said:
Yes also the case for me (the screen stays black until I close the camera app), this wasn't the case with my unofficial build of the rom (although I tested with a much older version of the oem partition - I think version 11).
I'm not on the rom anymore because it was generally laggy and no music app would play music. I didn't bother to investigate further because for me the music app is pretty much essential in daily use and just needs to work.
If you want this worked out, your best bet is to contact the developers of the rom at their google plus page
Hi,
was it due to lack of integration with the SD card? Because with mine in the official OA1, I do not have problems with the music directly, it plays (not m4a though), and I CAN show the contents of the SD card but other apps than the file manager cannot access the SD card. It is possible for me to play individual Songs via VLC though. I'd be thankful for your ideas in this.
Best
Calumet27
Click to expand...
Click to collapse

New [ROM][PORT][Oreo]MIUI 10 for Mi A1 [8.1]

MIUI X Mi5 X ROM
This one isn´t my Rom i only provide this ROM to You from this Autor
Igor​Original 4PDA Version / Thread
You can find out more and talk each other over the Telegram Chat: https://t.me/MiuiMIA1tissot
Also there wil be postet new Rom version´s.
Code:
include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
If you like to report errors use https://github.com/berlinux2016/MIUI10
All Rom Downloads are here availble: Androidfile Host (Right side).
The most up to date is the onelike these example: 9=Year 3= Month 1= Day
Also this one is Weekly Beta Version: xiaomi.eu_multi_MI A1_9.3.1_v10-8.1.zip
and this are Stable signed version > "MiRoom" < : Mi A1_MIUI_9.2.28_MiRoom_8.1.zip
Instructions how to Install if you are still on Android 8
- Wipe Data / System / Art / Dalvik
- Flash Rom
- If necessary, we flash the userdata
- Reboot, give time for initial setup We have patience, the setup takes about 15-25 minutes.
- After initial setup, restart again. it may seem that the system is terribly slow
Enjoying!
If system does not boot after 25 minutes:
Fastboot flash userdata with command
Code:
Code:
fastboot flash userdata userdata.img
Userdata Download
Reboot to recovery
Flash MIUI ROM
For Update:
- install the update without Wipe
-Reboot into Recovery and flash Rom
- after that set the Camera Fix you find them with Magisk Online "Mi A1 Camera Fix Lag Fix Oero" Once Downloaded/ Installed there you can use them next time with manual mode in Downloads folder.
For the one who are using the new Android 9 and need to downgrade need to use this tutorial for Downgrade without loosing the Imei:
https://forum.xda-developers.com/mi-a1/how-to/tutorial-downgrade-9-0-to-8-1-edl-imei-t3879624
Download of all files included the Downgrade files (about 3.2GB):
https://mega.nz/#F!v81xzQJb!JXXsokMUM8hwEa-v-ivs2g
I just made this relativly quick so please tell me if i forgot something.
By the way, here are the old Miui Thread: https://forum.xda-developers.com/mi-a1/development/rom-miui-10-mi-a1-epic-mod-t3879804
If you have questions, write to the topic.
Lets try
But where is they cámara Fix??
I Saw a Lot of roms.. but no te camera Fix..
Whats they difference between mirom and EU..
Camera Fix is in Magisk Online.
It´s the normal "Mi A1 Camera Lag FIx Oreo"
And one thing: Ican´t Boot the Weekly version 9.3.1. It was instant reboot to TWRP =/
I go with Normal version MiRoom and ignored the TWRP message in instal log.
First impression are: Verry snappy and fast.
The new miui 10 theme are not the same i know from Epic Miui because of the square shaped icon´s.
If you like to update Magisk u need to do this over the magisk app by Direct Install.
In epicrom, camera Fix, is for portait mode...
Portait mode works?
Mi cloud works?
Smartphone Camera for me are only to take fast shots. If i like to make good Pictures, i take my Sony Alpha 7 II
So i don´t know because i do not use them.
Maximaro said:
I just made this relativly quick so please tell me if i forgot something.
Click to expand...
Click to collapse
Telegram link: https://t.me/MiuiMIA1tissot
Miroom is not in spanish...
And xiaomi.eu 9.3.1 works perfect!
But i can't sing mi account... Pocarropa in epic rom do it!
Nueva actualización 9.3.14
I'm using the EU beta as my daily driver ?
i see only 9.3.1 on the download-link, u has 9.3.14, from where?
okay got it.
but the backlight of the 3 buttons is not working right.
it only lightning for 1-2 seconds, i setup to 5.
and most time it doesn´t light up
Can someone explain the differences of pro beta, Room beta, EU beta, and EU stable? Also, is this based on 4.9 or 3.18 kernel?
3.18 kernel, you can see in the screenshot of lovelyjcp above.
for me it´s currently not usable since i have the bug with the backlight of the buttons and also i think the power consumption is too high.
SeMo87 said:
i see only 9.3.1 on the download-link, u has 9.3.14, from where?
okay got it.
but the backlight of the 3 buttons is not working right.
it only lightning for 1-2 seconds, i setup to 5.
and most time it doesn´t light up
Click to expand...
Click to collapse
I don't have this bug ...
SeMo87 said:
i see only 9.3.1 on the download-link, u has 9.3.14, from where?
okay got it.
but the backlight of the 3 buttons is not working right.
it only lightning for 1-2 seconds, i setup to 5.
and most time it doesn´t light up
Click to expand...
Click to collapse
I can't find the 9.3.14
blade_m2003 said:
I can't find the 9.3.14
Click to expand...
Click to collapse
https://drive.google.com/file/d/1vUpOTlT1BWeBs1x9vSZ4Fmkp4rGli_Hc/view
I installed this rom, lots of force stops.
Sadegh said:
I installed this rom, lots of force stops.
Click to expand...
Click to collapse
LOL how about a clean install =/
I use the 9.3.14 version since there come out and hav not a singel problem!
So like always: the problem is in front of the screen.
Could you plz tell me the difference of these files:
xiaomi.eu_multi_MI A1_V10.2.3.0.ODBCNXM_v10-8.1.zip
xiaomi.eu_multi_MI A1_9.3.1_v10-8.1.zip
Mi A1_MIUI_9.2.28_MiRoom_8.1.zip
and 9.3.14 in google drive link above ?
are they all miui roms?

Categories

Resources