Long time user of XDA, first time poster! This website has been a constant help and friend through all of the Flashing, Modding and Fixing I've done through my many Smart-phones (All the way back to the HTC StarTrek flip phone).
I have a question about the removal of 3e Recovery on the Samsung Infuse.
-I recently bought it broken and have since repaired the LCD. First thing I
wanted to do was load it up with some Cyanogenmod or the equivalent, and
that's when I Discovered a potentially NEW problem regarding the replacement
of the Recovery file.
-As it is a general rule, to check other threads before making a new one, I have
spent the last week scouring the Infuse page to try and find an answer to my
specific issue, and since none of the fixes posted work, I was wondering if y'all
could help.
-First of all, the Recovery file is not under the System/Bin folder like many of the
walk through videos and Threads mention, it is instead in the root of the phone.
-Secondly, When using Root Explorer to mount the root folder as R/W, I was able
to replace the "Recovery" file with the modified variation. However, whenever I
restart the phone, go into recovery via the 3 button hold, It still gives me the
unsigned error. I exit the Recovery and let it boot up normally, only to find that
the "Recovery" file has been replaced with the original.
-I figured maybe there was a backup on the phone that is auto-subbed in for the
modified file. I do a search for "recovery" via root explorer and find a few more
"Recovery" files. No matter which one I replace, upon reboot, they have been
swapped out for the original "recovery".
I am at a loss... Any help would be greatly appreciated, as I have tried the Odin Methods to a T as well as the Heimdall method for recovery.
Thanks in Advance!
Corey Krattli
P.s. I know Im not the only one with this issue, as Ive seen it posted, but never
responded to. I think it may be a new issue with the 2.3.6
Long time user of XDA
then you should of known that you should post this in q/a section
The_Zodiac said:
Long time user of XDA
then you should of known that you should post this in q/a section
Click to expand...
Click to collapse
Ouch! Truth hurts.
Sent from my SAMSUNG-SGH-I997 using XDA App
Not even gonna answer this thread.... mod please move
Sent from my SAMSUNG-SGH-I997 using xda premium
The_Zodiac said:
Long time user of XDA
then you should of known that you should post this in q/a section
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
E3D
My turn. Way too many people got infuses for Christmas. Wrong section
Sent from my SGH-I997 using xda premium
Jeeze, a lot of hate... I figured a new potential Crappy 3e issue would be a Development issue, but Ill take it elsewhere. Appreciate the kidness. /s
Sorry you had to deal with that. The infuse forum is full of immature little kids. Your post was structured well and time was put into it, I'm sure someone will have an answer to your problem.
Sent from my SGH-I997 using XDA App
Excuse me perpertrator...but there is already a thread on this...and no it was not structured well...and no...he did not read first or he would have found a 3e recovery thread in the super thread....
Sent from my GT-I9000 using xda premium
Not structured well? He clearly stated that he tried to find information to help himself, but was unable to. He explained his problem clearly and with good grammar. Hell, he even signed the bottom with his name. I understand people flaming the "omg how do I flash recovery lol I tried it bricked wat do" posts, but the only thing wrong with this is the wrong section, which isn't that big of a deal. People make mistakes.
Sent from my SGH-I997 using XDA App
on one hand I don't know why we can't have development discussion in the development section. I thought we were here to share information on developing not just to showcase what we did... anyway that has been my problem with xda for a while. few poeple make tutorials on the original work and you can't ask questions about it if they dont. seems all the cooperation on xda happens outside of xda and the moderators enforce that so the "dev" section is really the rom download section..
but enough complaining, this wasn't a dev question in the first place. moving a file is hardly developing something. but that doesn't mean ya cant answer it as you tell the person to ask a mod to move it..
Samsung seems to have cought on to the 3e trick and changed something. at this point if the phone is preloaded with 2.3.6 you have to either downgrade through Odin or stop trying to do things the hard way and just flash a non secure kernel, you apparently already have root so just download sgs kernel flasher and use entropys DD kernel.
2.3.5 seems to be rootable throught the zerg rush exploit, 2.3.6 is very secure on the infuse. on future devices we may even have to wait for Sam firmware or other with access to samsungs fus server to provide a leak to get a kernel to dump the initramfs so non secure kernels can be compiled and flashed through Odin. that's just how it is.
I did in fact use the super thread. I tried every single thread listed and each one either soft bricked my phone or left me with a black screen when trying to enter recovery mode via the 3 button method. I then thought it might be an issue with the recovery file. This is when I discovered an issue where with 2.3.6 the recovery being replaced with the factory default file. At the very least, if there is no fix thus far, there should be a disclaimer that it doesnt work with 2.3.6. I apologize fot anyone who may have been pissed off, but I believe this IS a Development issue.
Thanks,
Corey Krattli
It Worked!
Doing the SGS kernel flasher and using Entropys Kernel did the Trick! I'm amazed as to why this isn't a thread in the SUPER THREAD in the Development section.
aluthier said:
Doing the SGS kernel flasher and using Entropys Kernel did the Trick! I'm amazed as to why this isn't a thread in the SUPER THREAD in the Development section.
Click to expand...
Click to collapse
Its not a thread yet because its a new problem. You got help, don't complain. Next time, post in q&a, and look there for similar threads first. I can see about 5 regarding your same problem with the new 2.3.6 not being able to get recovery the usual way. It's amazing how much a little reading can do.
Sent from my SGH-I997 using xda premium
aluthier said:
Doing the SGS kernel flasher and using Entropys Kernel did the Trick! I'm amazed as to why this isn't a thread in the SUPER THREAD in the Development section.
Click to expand...
Click to collapse
I added this to my how to in the q,a.
Once again, I appreciate the help from the Forum members who were pleasant and kind about the issue. Every one else, chill guys, XDA is not a place for anger and belittlement. There is enough of that in the real world.
Thanks!
Corey Krattli
aluthier said:
Once again, I appreciate the help from the Forum members who were pleasant and kind about the issue. Every one else, chill guys, XDA is not a place for anger and belittlement. There is enough of that in the real world.
Thanks!
Corey Krattli
Click to expand...
Click to collapse
Thank you for not feeding the flames. Feel free to post these sort of things in my thread, which is stickied in the development section, especially if you are unsure where to post or are trying to ask a question that may have been asked already. Some people are starting to get pissed off at the amount of repeat questions or questions asked in the wrong place, so understand that this is the usual treatment and not a personal attack. Welcome to the infuse forums, and feel free to pm me if you need anything.
Sent from my SAMSUNG-SGH-I997 using xda premium
thanks The entropy kernel fix my problem
it fix also the issue for me for an infuse back to stock with this version:
http://forum.xda-developers.com/showthread.php?t=1326143
a 2.3.3 back to stock version
Thanks man
Just going to state except you may not ise it but hdmi does not work on the DD.
Ditto
I have the same problem, and I think it's an issue with 2.3.6. I've searched xda and spent about a week sorting through Google results, but haven't found a solution yet.
aluthier said:
Long time user of XDA, first time poster! This website has been a constant help and friend through all of the Flashing, Modding and Fixing I've done through my many Smart-phones (All the way back to the HTC StarTrek flip phone).
I have a question about the removal of 3e Recovery on the Samsung Infuse.
-I recently bought it broken and have since repaired the LCD. First thing I
wanted to do was load it up with some Cyanogenmod or the equivalent, and
that's when I Discovered a potentially NEW problem regarding the replacement
of the Recovery file.
-As it is a general rule, to check other threads before making a new one, I have
spent the last week scouring the Infuse page to try and find an answer to my
specific issue, and since none of the fixes posted work, I was wondering if y'all
could help.
-First of all, the Recovery file is not under the System/Bin folder like many of the
walk through videos and Threads mention, it is instead in the root of the phone.
-Secondly, When using Root Explorer to mount the root folder as R/W, I was able
to replace the "Recovery" file with the modified variation. However, whenever I
restart the phone, go into recovery via the 3 button hold, It still gives me the
unsigned error. I exit the Recovery and let it boot up normally, only to find that
the "Recovery" file has been replaced with the original.
-I figured maybe there was a backup on the phone that is auto-subbed in for the
modified file. I do a search for "recovery" via root explorer and find a few more
"Recovery" files. No matter which one I replace, upon reboot, they have been
swapped out for the original "recovery".
I am at a loss... Any help would be greatly appreciated, as I have tried the Odin Methods to a T as well as the Heimdall method for recovery.
Thanks in Advance!
Corey Krattli
P.s. I know Im not the only one with this issue, as Ive seen it posted, but never
responded to. I think it may be a new issue with the 2.3.6
Click to expand...
Click to collapse
Related
why T959VUVKC1 and not T959VUVKD1 because T959VUVKC1 is more stable and T959VUVKD1 has frequent self reboots.
Condition to be fullfiled before flashing this rom is at below link:
http://forum.xda-developers.com/showthread.php?t=1079930
Install procedure:
1- Download Rom to PC from below link.
2- Put Rom.zip in sdcard.
3- Use Rom Manager to Reboot into recovery mode.
4- Choose Install Zip from sdcard.
5- Wait untill completed and reboot the phone.
6- wait for 3-5 mins for phone to fully come up first time.
Features included in the Rom:
1- Deodexed
2- Root
3- 6 LockScreens and Extended Power Menu options.
Rom.zip download link:
http://www.megaupload.com/?d=MQGXTBMS
it doesn't work for me.
cwm3 complains about it being amend not edify.
not to complain, but did you test this?
Have you followed this first before flashing:
http://forum.xda-developers.com/show....php?t=1079930
arahma said:
Have you followed this first before flashing:
http://forum.xda-developers.com/show....php?t=1079930
Click to expand...
Click to collapse
I clicked on it several times to read the link. I got:
404 PAGE NOT FOUND
The page you requested not found
Sent from my SGH-T959V using XDA App
arahma said:
Have you followed this first before flashing:
http://forum.xda-developers.com/show....php?t=1079930
Click to expand...
Click to collapse
Of course not.
I ran it directly from the orange ClockworkMod Recovery v3.0.2.8.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
arahma said:
why T959VUVKC1 and not T959VUVKD1 because T959VUVKC1 is more stable and T959VUVKD1 has frequent self reboots.
Condition to be fullfiled before flashing this rom is at below link:
http://forum.xda-developers.com/showthread.php?t=1079930
Install procedure:
1- Download Rom to PC from below link.
2- Put Rom.zip in sdcard.
3- Use Rom Manager to Reboot into recovery mode.
4- Choose Install Zip from sdcard.
5- Wait untill completed and reboot the phone.
6- wait for 3-5 mins for phone to fully come up first time.
Features included in the Rom:
1- Deodexed
2- Root
3- 6 LockScreens and Extended Power Menu options.
Rom.zip download link:
http://www.megaupload.com/?d=MQGXTBMS
Click to expand...
Click to collapse
Can you please tell me why you continue to post telling people to use ROM manager? I know that you have used it, but there is no official release of CWM (FOR SGS4G models) inside of ROM Manager yet. Additionally, Edify is the current standard for CWM 3.x.x not Amend so why are you pointing people to use zip's not following edify scripting.
Furthermore, do you really have any proof that KC1 (AN UNRELEASED BUILD from Samsung) is MORE stable than the KD1 WHICH WAS released?
Again for people who just take your word and then mess up their phone it's not helpful.
I say ban. Already
Sent from my SGH-T959V using XDA Premium App
badboy68 said:
I say ban. Already
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
+1 i agree
Im so sick of this forum.... seriously worst collective group of enthusiasts ever.
mavictb said:
Im so sick of this forum.... seriously worst collective group of enthusiasts ever.
Click to expand...
Click to collapse
don t come back then, seriously, we are not the ones with the problems, its rooks like you.. u obviously missed a thread. im jus saying
badboy68 said:
don t come back then, seriously, we are not the ones with the problems, its rooks like you.. u obviously missed a thread. im jus saying
Click to expand...
Click to collapse
lol as if you know me. cocky much?
oh and also I dont have any problems with my device... and Im far from a "rook" I have been modding smartphones since smartphones existed... and before that I was modding pocketpcs and psps. It seems people like you jump to conclusions.
mavictb said:
oh and also I dont have any problems with my device... and Im far from a "rook" I have been modding smartphones since smartphones existed... and before that I was modding pocketpcs and psps. It seems people like you jump to conclusions.
Click to expand...
Click to collapse
There's no reason to be enthusiastic over a bad solution such as the one proposed in the OP.
My point for commenting wasn't to not be enthusiastic, the point is THIS PROCEDURE may work for the author, but it's not the recommended nor the proper way to use CWM. It's not the CWM designed for this device.
So pardon me to rain on the parade, preventing users from doing something to mess up their device.
mavictb said:
lol as if you know me. cocky much?
Click to expand...
Click to collapse
i dnt have to know you, wen it comes to the 4g, ur a rook, if i made u mad sorry, if das all u can say, den like i said, dnt come back to this forum
joedeveloper said:
There's no reason to be enthusiastic over a bad solution such as the one proposed in the OP.
My point for commenting wasn't to not be enthusiastic, the point is THIS PROCEDURE may work for the author, but it's not the recommended nor the proper way to use CWM. It's not the CWM designed for this device.
So pardon me to rain on the parade, preventing users from doing something to mess up their device.
Click to expand...
Click to collapse
Thank you for your comment. I'm a noob. I've been reading and rereading everything in our forum and to tell you the truth I'm am getting confused.
I definitely need the correct, easiest and simplest method. Not because I'm lazy. I'm just a brand new noob and if I screw up my phone I'm in real trouble.
I barely know the basics but I'm itching to mod my phone. I'm missing all the fun! Lol.
All this dialog concerning our current developments and different methods may be annoying to some of the more knowledgable but to a noob like me it is very informative.
Thank you all for your input.
Sent from my SGH-T959V using XDA App
badboy68 said:
i dnt have to know you, wen it comes to the 4g, ur a rook, if i made u mad sorry, if das all u can say, dnt, den like i said, come back to this forum
Click to expand...
Click to collapse
I have had my 4g since 10am release day... still not seeing how I'm a "rook" but I guess everyone is entitled to an opinion, ignorant or not.
P.S. its spelled didn't, that's and then.
Like joedeveloper said. Use the CWM from krylon. This is going to cause issues in the long run. The CWM from krylon is still beta, but that is the version you want. Not from the vibrant.
Sent from my SGH-T959V using XDA Premium App
joedeveloper said:
There's no reason to be enthusiastic over a bad solution such as the one proposed in the OP.
My point for commenting wasn't to not be enthusiastic, the point is THIS PROCEDURE may work for the author, but it's not the recommended nor the proper way to use CWM. It's not the CWM designed for this device.
So pardon me to rain on the parade, preventing users from doing something to mess up their device.
Click to expand...
Click to collapse
My first post was also towards the OP. I'm tired of seeing the blind lead the blind. It only leads to "I bricked my phone, HELP!" threads. I guess I was a little tired last night and didn't articulate my thought properly. I am only on this forum because I own the device and I try to help the actual devs (all 3 of them for this device) and also have current information on progress for this device. I'm not here to be led by the blind. Not saying that you are one of the ones who is blind because I really don't know you. either way I am not at all enthusiastic over this so called solution at all... I used odin to update my device the proper way as I have been using odin well over a year now. Which it seems to some makes ME a "rook" lol Ignorance is bliss... must be a Obama supporter too I bet.
Jerry D said:
Thank you for your comment. I'm a noob. I've been reading and rereading everything in our forum and to tell you the truth I'm am getting confused.
I definitely need the correct, easiest and simplest method. Not because I'm lazy. I'm just a brand new noob and if I screw up my phone I'm in real trouble.
I barely know the basics but I'm itching to mod my phone. I'm missing all the fun! Lol.
All this dialog concerning our current developments and different methods may be annoying to some of the more knowledgable but to a noob like me it is very informative.
Thank you all for your input.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
stick to anything posted by krylon360/whitehawx, etc etc
mavictb said:
My first post was also towards the OP. I'm tired of seeing the blind lead the blind. It only leads to "I bricked my phone, HELP!" threads. I guess I was a little tired last night and didn't articulate my thought properly. I am only on this forum because I own the device and I try to help the actual devs (all 3 of them for this device) and also have current information on progress for this device. I'm not here to be led by the blind. Not saying that you are one of the ones who is blind because I really don't know you. either way I am not at all enthusiastic over this so called solution at all... I used odin to update my device the proper way as I have been using odin well over a year now. Which it seems to some makes ME a "rook" lol Ignorance is bliss... must be a Obama supporter too I bet.
Click to expand...
Click to collapse
ok must be a hitler supporter bet, point taken. i believe i was also a little tired myself friend, but if your assisting with the devs on this device, then much apologies to you. i hope you continue to support this forum in making this phone better, for me and all of us who owns this sgs4g. thank you
Hey Fellas
i am putting together a central localized file location. well it is on my server and my question to those that are activily creating Roms is this. idea in question that is soon to be released to this forum group a master list of all mods, apps,scripts and Roms. but my problem is the amount of time i will have to download everyones releases and then hop to all the redirects to just get the files is alot of jumping around and thats a pain
.
I do not mind searching out your download links but it is very time consuming.
So as not to step onto a set of toes that may not like this idea please let me know if it is ok and or it is not ok with you.
i have a few today i will post the app, With a simple edit to the base roms it will allow all to be able to get your base rom and flash it then any and all updates you do can be accesable instantly from the handset..
So my question to you guys is if i add to the base application your creations is this something your against or does this sound good.
So as it is still early in the Rom database here will those that like to be added into this app shoot me a message and i will give you the files needed to support your Roms for inclusion.
This way i can do two otions either use my own server to host your file or link to your location to get the file.
Maybe other otions but for now i will go with plan A
This is not a creation by me as it has been done already, just not in the A2 thread. But i want to atleast show what others have done to this route and integrate nito our releases this open to all app.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Already i am getting dead links forr alot of the files you guys have released
I already am getting dead links to a;ready posted files.
I need current links so i can sort out the catagories of each rom and its sub parts.
Rom
Theme
Mods
Scripts
ect ect
Please do NOT include any of my stuff on your server!
I am fully capable of mirroring my OWN data, as needed. I do NOT want MY developed stuff anywhere that I do NOT have full authority and OR permissions to it.
no problem..
ok no problem ony way they get access is if they are currently running the rom and you make a new version then that user has can update the rom accoringly. maybe it is best i just post the files and let you decide if you like it .. seeing it is already a xda approved and deveoped app already.
if you like ill post up the files and screen shots of mine already? Hope that makes it easier to understand what i am asking .. seeing as it is already posted i guess i wanted to make the app database easily updated for the devs not users they get the apk file Devs get the master link xml files for the rom at cook time
streetmedic said:
ok no problem ony way they get access is if they are currently running the rom and you make a new version then that user has can update the rom accoringly. maybe it is best i just post the files and let you decide if you like it .. seeing it is already a xda approved and deveoped app already.
if you like ill post up the files and screen shots of mine already? Hope that makes it easier to understand what i am asking .. seeing as it is already posted i guess i wanted to make the app database easily updated for the devs not users they get the apk file Devs get the master link xml files for the rom at cook time
Click to expand...
Click to collapse
You do know that all we (devs) have to do is let kholk know about our ROMS and give him the xmls, and he will make them vis-able and download-able from within ROM manager, including updates, right?
I know I really don't like that whole idea of ANOTHER app with our hacks and ROMS and such. isn't that what the XDA app provides EVERYONE already (a way to download ROMs and updates), so does ROM Manger, if you get the data to the right devs.
I will reserve my complete No for the time being and see what some other devs in here think about this, we may have to put our heads together as well...
Don't get me wrong, I don't dislike this idea, just that I think it is kinda redundant.
I'm gonna agree with Jim just for the simple point that I pay to have my work mirrored through mediafire. Its quick and saves me and everyone who downloads my work time, its fast and reliable and I dont have to worry about others having to provide mirrors.
dev section
dang i pay for 21.00 every 2 years for unlimited space and bandwidth and unlimeted sub domains but that is neither the point here i did post the app in the developers section and 3 files you use to keep it updated. do as you wish with the app . the original devs write up on XDA was good release to those interested..
all i need is links to files if you did not want it on my host.. but i will put yalls that have dead links into my app as you have it .. alot dead links guys its up to yall to figure it out then..
xda does not allow you to it from inside the phone except if your using say the xda this is a different way if you post a new update to your app it shows in the update in your roms area and option to dload it and flash it and run from there.. see post in dev section i posted the files..
streetmedic said:
xda does not allow you to it from inside the phone except if your using say the xda this is a different way if you post a new update to your app it shows in the update in your roms area and option to dload it and flash it and run from there.. see post in dev section i posted the files..
Click to expand...
Click to collapse
Whatever you are smoking please pass it over here, because you CAN download ROMs onto your phone right from the XDA app, and save them to your SDcard, and ROM Manager WILL ask you if you want to flash it once it is downloaded. I do this ALL the time.
jimbridgman said:
Whatever you are smoking please pass it over here, because you CAN download ROMs onto your phone right from the XDA app, and save them to your SDcard, and ROM Manager WILL ask you if you want to flash it once it is downloaded. I do this ALL the time.
Click to expand...
Click to collapse
Hey Jim, if I install ROM Manager to flash roms from the SDcard (I like this idea) it wants me to install CWM Recovery -which I already have. I'm guessing to install roms from the app I choose RAZR as my device and install CWM for that...(?)
Sent from my MB865 using xda premium
Apex_Strider said:
Hey Jim, if I install ROM Manager to flash roms from the SDcard (I like this idea) it wants me to install CWM Recovery -which I already have. I'm guessing to install roms from the app I choose RAZR as my device and install CWM for that...(?)
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
I think it is bionic that will work for us
lkrasner said:
I think it is bionic that will work for us
Click to expand...
Click to collapse
Oh, okay. Thought it would be RAZR because I used JWDaddy's CWM for the on boot recovery.
Sent from my MB865 using xda premium
Apex_Strider said:
Hey Jim, if I install ROM Manager to flash roms from the SDcard (I like this idea) it wants me to install CWM Recovery -which I already have. I'm guessing to install roms from the app I choose RAZR as my device and install CWM for that...(?)
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
NO!!!! don't choose RAZR, choose to flash the bionic recovery. You MUST also have the Atrix2 bootloader, I use the ROM Manger paid version, so that I can do a few other things.
jimbridgman said:
NO!!!! don't choose RAZR, choose to flash the bionic recovery. You MUST also have the Atrix2 bootloader, I use the ROM Manger paid version, so that I can do a few other things.
Click to expand...
Click to collapse
you mean bootstrap right?
jimbridgman said:
NO!!!! don't choose RAZR, choose to flash the bionic recovery. You MUST also have the Atrix2 bootloader, I use the ROM Manger paid version, so that I can do a few other things.
Click to expand...
Click to collapse
Will this over-write the on boot global JWDaddy CWM already on my device?
Sent from my MB865 using xda premium
Apex_Strider said:
Will this over-write the on boot global JWDaddy CWM already on my device?
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
if i remember right it will not, but i am not totally sure
lkrasner said:
you mean bootstrap right?
Click to expand...
Click to collapse
Yeah... sometimes my fingers work faster than my brain!
---------- Post added at 06:48 PM ---------- Previous post was at 06:46 PM ----------
Apex_Strider said:
Will this over-write the on boot global JWDaddy CWM already on my device?
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
No they are two totally different things.
funny part is that i recall a few devs having a wiggy fit when a user posted a screen shot of his modded rom with out permission . and now that sombody does ask permission to set a data base of updated links for a people you mock that persons request.. that is why no one asks for help
So i guess say a person downloads cwm and installs your roms. that it by default says you updated to say ver 3 ?
Oh yea if i am running a older version of said rom it will magically alert with out ever logging into XDA.
I get rom manager does this but funny thing is it not for any [email protected] roms ive tested.. and ive used most of the posted roms..
Yall miss the point of the application . maybe you should try this and then comment .. it allows you or any person to add a update or addon dloads to be installed from a APK that is cooked into your roms that you all make . all that needs to be done is add a xml to system folder.
then when you make a updated ver of your rom it allows simple update ..
But hey flame the person that one that trys to make a rom a bit better for all ..
then why dont any of you add it to his current supported rom list.. that is my point here . it allows some customized options that are not allowed .... im trying to make a rom list and those links are posted for those that like to use your base that you posted to make new roms from or when you update to a new version its avail to those that want it.. if the optional xml is included from time of cooking your update that you add xml
But from now on i wont ask ask to get blessings from those that post roms to use it.. its pointless to ask cause when one does they get be-littled as it says in many areas lower in this thread..
People are to funny in this forum.. i am not saying you just pointing this out
I'd like to believe your intentions with this idea are nothing but good, but you have to understand these guys (devs) work long and hard on their work and reserve the right to approve/disapprove of such things. And though not everyone sees things as you might, respect their work and their decisions as to what happens to it and where it goes.
I've gotten tons of help from the devs by asking them for it. They've been nothing but helpful, despite your comment. And the forum is their place (and other's) to share/discuss/etc their roms/mods/themes/etc. If they wanted to compile everything into one particular site or app or whatever, they certainly would have already collaborated to do so.
Edit: I'm not trying to argue with you, nor am I trying to argue for developers. Its just my two cents worth. When you post something, you have to be open to discussion. Likewise, if you ask someone something, you have to be prepared for a 'no' when you're hoping for a 'yes'.
Sent from my MB865 using xda premium
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*If you find this Help Thread helpful, feel free to hit the "thanks" button below!
So again, this has been done before in other threads, but I feel compelled to include it in our Atrix 2 forum. Granted, we now have a "Q&A" (Questions & Answers) sub-forum, there still seems to be an upsurge of questions being asked and new threads being posted that have already been addressed, discussed, and posted. To avoid the flaming and trolling of New Members here, I'm opening up a thread for questions that New Members may be too hesitant to ask in sub-forums, or ones that are "dev-related" whereas you may not have hit your '10 post' mark yet in order to post in development sub-forums, or any other questions you feel need answers, to avoid cluttering up the rest of the forum sections. Trust me, you will get a much more acceptable reception from posting your 'dumb' or "noobish" questions here, sparing yourself from flaming or otherwise from creating a new thread with a question or concern that has already been dealt with.
So for the sake of everyone's time here, I have to assume that you (yeah, you!) have already registered and read the forum rules, as well as watched that lovely "You're A n00b On XDA" video, so I don't feel compelled to do the entire rundown of the full length version of rules. Please keep these in mind when within the forum, and exercise your own abilities before enlisting the help of others here. Granted, we are here to help you, but if it is apparent that you have not helped yourself, we will let you know in a way that *hopefully would eliminate the need to call you out on your lack of reading, searching, reading, and searching some more. Now that we have that out of the way, let's begin:
***Rules To Abide By:***
When visiting this thread to help the less fortunate, or rather, less knowledgeable, please observe The Rules Of XDA, so that we all (Seniors, Members, Developers, etc.) can provide the most helpful insight, guidance, and direction to those new to xda, as the are "New Members", rather than "NØØBS". I will outline several other threads that can be found throughout xda later, but for now, we'll focus on some basics.
No calling anyone a "n00b".
No making fun of someone's genuine question.
No swearing -even using *'s or other symbols is still swearing, so don't do it!
No posting useless comments/off topic comments.
No posts saying "Thanks" (It makes others feel as though their "help" is valued by clicking the 'button', rather than a 'typed' "thank you")
I will do my best to address your concerns, questions, or otherwise. Same goes for the other members here you frequently help me to help you. If I cannot seem to find an answer, I will try and point you in the right direction. Please, be patient for a reply, and courteous to those who attempt to bring resolve to your issues. We're all doing this in our free time, and as a service to you. Remember to thank those who do, in fact, help you by clicking their "thanks" button, not just a 'typed' reply saying thanks.
***Helpful Threads To Observe:***
Brief synopsis on basic rules and how to help the community
[GUIDE] How To Be A New Member, Not A NØØB
UPDATE[7/22/12] The Beginners Guide !!! (NOOBS)[ALL IN 1 RESOURCE GUIDE]
[HOW TO] get your AT&T phone onto ICS - Files are back up
QUESTIONS BELONG IN Q&A!!!
So, going forward with this, if anyone has any suggestions to improve upon this idea, please either PM me or post a brief reply here with ideas to help our fellow New Members along their way. I will be keeping this thread opened to revision, assuming the ideas and suggestions are beneficial to those who are "New Members" here on the Atrix 2 forum. Please, I implore you, if you post here any replies to questions asked, be a courteous and patient with the New Members as you'd like them to be with you, if the roles were reversed. This is a continued attempt to try and alleviate the work load throughout the forums related to the Atrix 2 to answer or address questions, concerns, or otherwise. I expect us all to show these New Members the kind of diligence in dealing with their issues as they would expect from us, so please, for everyone's sake, be helpful! This will help us all, over time... hopefully
Reserved for additional help links
Just in case...
flash 2.3.6
hello!
help me please to set *superuser and custom recovery to firmware after the rollback from *4.0.4 *to 2.3.6
john05088 said:
hello!
help me please to set *superuser and custom recovery to firmware after the rollback from *4.0.4 *to 2.3.6
Click to expand...
Click to collapse
Have you already used Jim's or alteredlikeness' script to go back to GB? Also, what firmware version is your Atrix 2: US, International? Let me know what you've done, what firmware your phone is, and what OS version you're on now so I can point you in the right direction...
Sent from my SAMSUNG-SGH-I747 Anti-Motorola Ballistic Missile
trying to flash back to stock
okay, im currently on supercharged atrix v5, now im wanting to go back to stock. when i start the flash from RSDLite its gets to 6/20 and stops and gives me this error
failed flashing process. 6/20 flash cdt bin "cdt.bin"-> phone return fail; phone connected
this if the fxz i have- InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID28 5.xml
ive read users mentioning lines in the file to add or delete but could not find a specification on which ones exactly. any help is greatly appreciated.
Androiduser13 said:
okay, im currently on supercharged atrix v5, now im wanting to go back to stock. when i start the flash from RSDLite its gets to 6/20 and stops and gives me this error
failed flashing process. 6/20 flash cdt bin "cdt.bin"-> phone return fail; phone connected
this if the fxz i have- InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID28 5.xml
ive read users mentioning lines in the file to add or delete but could not find a specification on which ones exactly. any help is greatly appreciated.
Click to expand...
Click to collapse
Have you had a look at this thread? : http://forum.xda-developers.com/showthread.php?t=1539167
Return to Stock 2.3.5 Fastboot SCRIPT
Sent from my SAMSUNG-SGH-I747 Anti-Motorola Ballistic Missile
Apex_Strider said:
Have you had a look at this thread? : http://forum.xda-developers.com/showthread.php?t=1539167
Return to Stock 2.3.5 Fastboot SCRIPT
Sent from my SAMSUNG-SGH-I747 Anti-Motorola Ballistic Missile
Click to expand...
Click to collapse
i looked through that thread and as i understand it i would need to download the RETURNTOSTOCK2.3.5SCRIPT.ZIP then extract it into 2 separate files, plug my phone in fastboot then doubleclick on the extracted .bat file and it runs automatically. do i need any other drivers or programs along with that zip file? am i even understanding that read correctly
Androiduser13 said:
i looked through that thread and as i understand it i would need to download the RETURNTOSTOCK2.3.5SCRIPT.ZIP then extract it into 2 separate files, plug my phone in fastboot then doubleclick on the extracted .bat file and it runs automatically. do i need any other drivers or programs along with that zip file? am i even understanding that read correctly
Click to expand...
Click to collapse
You only need to separate the webtop files if you don't want to flash the webtop, otherwise run the .bat file while you are in AP Fastboot. Make sure you have the Motorola drivers installed on your computer. You should be fine after that...
Sent from my SAMSUNG-SGH-I747 Anti-Motorola Ballistic Missile
FIRST omcoom
i have MOTOROLA DEVICE MANAGER 2.2.28 downloaded currently and i got that from the original thread telling how to use rsdlite. its 31.5mb but i dont know if im using it correctly. i have the short cut on my desktop and when i run it, it gives 2 options
repair-reinstall all program features installed by the previous setup
remove-remove all installed features
is this the right item or do i need different drivers? thankyou for your help
---------- Post added at 09:51 PM ---------- Previous post was at 09:15 PM ----------
WOW. this worked so easy. ive been struggling with rsd lite and this only took 2-3 minutes. thanks for forwarding me to that thread.
backup before updating?
new to android - so not sure what needs to be backed up and what not. sooner or later i'll be updating to ICS. can anyone help me understand what should i backup before i update? what gets wiped? and if there are any tools out there...
ps. i am not rooted, so don't have titanium.
thanks much
cloudedhopes said:
new to android - so not sure what needs to be backed up and what not. sooner or later i'll be updating to ICS. can anyone help me understand what should i backup before i update? what gets wiped? and if there are any tools out there...
ps. i am not rooted, so don't have titanium.
thanks much
Click to expand...
Click to collapse
I'd recommend you root while on 2.3.6 and flash the custom recovery (CWM) Clockworkmod Recovery, so as to familiarize yourself with things. CWM has the option in its menu to 'backup' and it's a good tool for that purpose. Backing up does not wipe or delete any data, only "backs up", hence the name. Wiping user data/factory reset will wipe all of your data: contacts, apps, pictures and other media, etc. I do NOT recommend using Titanium Backup for anything -it seems to cause way more problems for our phone than it does good.
Sent from my SAMSUNG-SGH-I747 Anti-Motorola Ballistic Missile
back to stock, trying to re root
so now im back to stock and am trying to re root ONLY for screenshot capability purposes. i flashed to 2.3.5 then did the OTA for 2.3.6. now i just want to root again. but i currently still have the SUPERUSER app in my app drawer but it doesnt show in my MANAGE APPS settings. can i re root with that SUPERUSER app still there? will it affect anything or how could i get rid of it? thanks
Androiduser13 said:
so now im back to stock and am trying to re root ONLY for screenshot capability purposes. i flashed to 2.3.5 then did the OTA for 2.3.6. now i just want to root again. but i currently still have the SUPERUSER app in my app drawer but it doesnt show in my MANAGE APPS settings. can i re root with that SUPERUSER app still there? will it affect anything or how could i get rid of it? thanks
Click to expand...
Click to collapse
Can you uninstall it via: settings>manage apps>superuser>uninstall? You should just be able to re-root without any problems. The superuser app is just the application that allows permissions granted/denied for apps which require root privileges...
Sent from my SAMSUNG-SGH-I747 Anti-Motorola Ballistic Missile
Apex_Strider said:
I'd recommend you root while on 2.3.6 and flash the custom recovery (CWM) Clockworkmod Recovery, so as to familiarize yourself with things. CWM has the option in its menu to 'backup' and it's a good tool for that purpose. Backing up foes not wipe or delete any data, only "backs up", hence the name. Wiping user data/factory reset will wipe all of your data: contacts, apps, pictures and other media, etc. I do NOT recommend using Titanium Backup for anything -it seems to cause way more problems for our phone than it does good.
Sent from my SAMSUNG-SGH-I747 Anti-Motorola Ballistic Missile
Click to expand...
Click to collapse
thanks for the suggestion... now i'm just thinking what to backup and why? i mean the apps are there on play store, contacts, calendar on google... hmm...
cloudedhopes said:
thanks for the suggestion... now i'm just thinking what to backup and why? i mean the apps are there on play store, contacts, calendar on google... hmm...
Click to expand...
Click to collapse
The one nice thing I have found about using a backup application (ie, TB) is that it also backs up your user data as well. So home screen settings, texts, basic settings, EVERYTHING. You can literally install a fresh ROM and be back EXACTLY where you were before.
Word of caution though, obviously if you have data backed up for a GB ROM, do not restore data on an ICS ROM. Mixing that type of thing is bad news.
Sent from my SAMSUNG-SGH-I727 using xda premium
Hey guys, I'm new to the Boot Menu Manager, how do I use scv7 leak 2 as my second system?
I've searched how to use the second system, but with all the posts, I couldnt find an exact answer.
I know it has to be extracted in the clockworkmod/backup folder of the sd card, but will that interfere with the backup of my first system? (which is ICS Leak #1)
Again I've never tried this, so I apologize for this, but hey better safe than sorry right? If anyone would be willing to pm me with help that'd be GREATLY APPRECIATED.
Axis_Drummer said:
Hey guys, I'm new to the Boot Menu Manager, how do I use scv7 leak 2 as my second system?
I've searched how to use the second system, but with all the posts, I couldnt find an exact answer.
I know it has to be extracted in the clockworkmod/backup folder of the sd card, but will that interfere with the backup of my first system? (which is ICS Leak #1)
Again I've never tried this, so I apologize for this, but hey better safe than sorry right? If anyone would be willing to pm me with help that'd be GREATLY APPRECIATED.
Click to expand...
Click to collapse
Bootmenu was developed by Whirleyes and originally released for the Razr.
The original thread has all the info you need on using it.
Bootmenu RAZR thread
Is it all the same even if i haven't had scv7? Ive always stuck to the original ics leak. Rooted. Its all confusing. Im sorry.
Sent from my MB865 using xda app-developers app
Axis_Drummer said:
Is it all the same even if i haven't had scv7? Ive always stuck to the original ics leak. Rooted. Its all confusing. Im sorry.
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
If i'm reading the thread right, it looks as though you can only flash a nandroid backup to the second system. And since scv7 is a zip install, this is not possible with bootmenu. Since it's a zip, think of it as a HUGE patch for your current stock rom. Nandroid backups are completely different.
So you're pretty much outta luck on what you want to do bud.
Why not just flash scv7 and run it as your normal ROM?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*If anyone in this thread helps you, please click their "thanks" button below!
Okay, so by my count we have at least fourteen (14!) threads about 'Did I brick my phone' or the like in our Q&A Section within the last few days, probably more in actuality. That's just ridiculous. Why we need a new thread every time someone thinks they have bricked their phone is just pointless, clutters up the forum, and isn't in line with the rules of this site. This is a prime example of members (mostly new ones) thinking it's proper protocol to start a new thread, regardless of having over a dozen others on the same topic. So, I'm opening this thread for some clarification on this, and for questions to be asked here if you have done something to your phone resulting in any kind of booting problem. If you feel like you have possibly bricked your phone (either hard bricked or soft bricked), it would be beneficial to start here for some definitive answers to your particular situation. Though we here on xda are willing to help others with their dilemmas, this site isn't necessarily for tech support to those who try to do something they have no clue as to what they're doing. Rooting/modding/upgrading/etc your phone won't help you woo the ladies, it won't win you any awards with your peers or co-workers, nor will it make your mother proud of you. Having an interest in this type of thing is great; but there are risks involved, and the potential to brick your device can always be present if you're not careful and do not follow the instructions exactly as they are given for what you are attempting.
Now then, allow me to give a run down of what is a soft bricked device:
If you're phone will not boot passed the Motorola splash screen = soft brick
If you your phone will only boot into AP Fastboot, and nothing else (AP Fastboot Flash Mode (S) (Flash Failure) 0A.68) = soft brick
If you can only manually boot into AP Fastboot (holding volume ↑ + ↓ + power buttons at the same time) = soft brick
Attempt to FXZ back to GB and get an error (step "_____" failed) and will not boot into Android, but only AP Fastboot = soft brick
If your phone will boot, but only as far as the Motorola splash screen, reboot, and continue = bootloop (super soft brick)
Okay, now on to what a hard bricked device is:
If your phone will not boot at all, no power, nothing but a white LED = hard brick
If your phone has none of the above = super hard brick
If your phone will not boot at all, and the battery gets very hot = hard brick
JTAG or RIFF boxes will not recognize the device if any of the above has been experienced -- please note this!
Now, if you have any of the above, please reply in this thread and we will try to see if we can pull you out of your "brickdom" -- assuming you are only soft bricked. If you are showing any of the above signs of being hard bricked, well, you're our of luck. You will need to try to contact Motorola for a warranty exchange (assuming your device is within the one [1] year warranty) or contact AT&T's 1-800 number (assuming this is your provider). Again, this thread is in hopes that we can keep all the "Plz Halp I Brickz My Fon" threads from popping up all over. You've either hard bricked your device or it's soft bricked/bootlooping, in the case of the latter we can help. If I've overlooked any of the above mentioned lists of "brick possibilities", please let me know and I will update the OP.
Great Post! Thanks for another great rundown!
I think this is sticky material.
I agree with Jim. This should definitely be stickied. Hopefully everyone will read this before posting the same questions repeatedly.
Great post Apex! Glad to see this.
Sent from my MB865 using xda premium
Might i suggest adding "ICS update failed","Can't fxz back to stock 2.3.x" (if it isn't much trouble) and links to already available solution threads,coz with the advent of the ICS OTA that is what has been cluttering up the forum lately.
Just a sincere thought...
But anyways great post...
Thanks Apex..
Sent from my Atrix2 Stock ICS Leak#2 Rooted,Deodexed,With Google Now...
deveshmanish said:
Might i suggest adding "ICS update failed","Can't fxz back to stock 2.3.x" (if it isn't much trouble) coz with the advent of the ICS OTA that is what has been cluttering up the forum lately.
Just a sincere thought...
But anyways great thread idea...
Thanks Apex..
Sent from my Atrix2 Stock ICS Leak#2 Rooted,Deodexed,With Google Now...
Click to expand...
Click to collapse
Good point, though I was thinking of keeping this one "brick only" and drawing up another for all the problems people are having updating to ICS. That to me seems like a whole other animal. But, this was something I just thought was somewhat overdue, and posted in an attempt to funnel all the bricked users here, rather than muddying up the forum. Thanks for the suggestion, I will put some thought into this. Oh, and I do have your PMs -- I've read them and will be getting back to you. My apologies for the delay thus far. I'll be on to address those things you brought up soon... :good:
Edit: We'll see how this all goes, and see who posts what. Perhaps it could encompass that problem as well. If it keeps the forum free of extraneous threads, I'd consider this successful!
Apex_Strider said:
Oh, and I do have your PMs -- I've read them and will be getting back to you. My apologies for the delay thus far. I'll be on to address those things you brought up soon... :good:
Click to expand...
Click to collapse
Lol well don't strain yourself too much see to them in your leisure time.Thanks
Sent from my Atrix2 Stock ICS Leak#2 Rooted,Deodexed,With Google Now...
deveshmanish said:
Lol well don't strain yourself too much see to them in your leisure time.Thanks
Sent from my Atrix2 Stock ICS Leak#2 Rooted,Deodexed,With Google Now...
Click to expand...
Click to collapse
I'm not neglecting you, just super busy after being away for the last week for work. I'll get back to you, I assure you of that!
Sent from my rooted Mayan Calendar running Mayanogenmod 10
Great work as always mate.
Some guys suggested stickying this. I understand the intent but unfortunately, stickying a thread seems to be the best way to ensure that the thread will not even be seen, let alone read. Regular and periodic bumping seems to work best.
PS: Apex, appreciate the work. See if you can add typical / common soft brick situations and the panacea, so that lot of people don't even have to post but may simply refer to this thread.
Bumping...
Sent from my rooted Mayan Calendar
I'd hoped that I would never need to post here but here I am. Actually, I'm posting on behalf of a friend.
My friend has the Indian A2 on stock gb and stock recovery - no bootstrap, etc. The phone was rooted and had busybox installed. My friend wanted to unroot and so tried to remove busybox using some busybox installation app from the market.
Now on rebooting, the phone doesn't get past the Motorola logo. The poor fellow is almost in tears
Hope the phone is not a paperweight. How can I set it right? Thanks in advance for the help.
athani said:
I'd hoped that I would never need to post here but here I am. Actually, I'm posting on behalf of a friend.
My friend has the Indian A2 on stock gb and stock recovery - no bootstrap, etc. The phone was rooted and had busybox installed. My friend wanted to unroot and so tried to remove busybox using some busybox installation app from the market.
Now on rebooting, the phone doesn't get past the Motorola logo. The poor fellow is almost in tears
Hope the phone is not a paperweight. How can I set it right? Thanks in advance for the help.
Click to expand...
Click to collapse
Man that should be updated in OP never uninstall busybox that way.I did the same thing and bootlooped from ICS Leak2.The return from where seems shady till now.
Anyhow since he was on gb just fxz back with the proper files and you should be fine.
Sent from my Atrix2 Stock ICS Leak#2 Rooted,Deodexed,With Google Now...
deveshmanish said:
Man that should be updated in OP never uninstall busybox that way.I did the same thing and bootlooped from ICS Leak2.The return from where seems shady till now.
Anyhow since he was on gb just fxz back with the proper files and you should be fine.
Sent from my Atrix2 Stock ICS Leak#2 Rooted,Deodexed,With Google Now...
Click to expand...
Click to collapse
Thanks. Good to know that I can resurrect the phone.
I've downloaded the file from the fxz thread. I've never used RSDLite before. Can someone please link me to some guide on how to use it.
athani said:
Thanks. Good to know that I can resurrect the phone.
I've downloaded the file from the fxz thread. I've never used RSDLite before. Can someone please link me to some guide on how to use it.
Click to expand...
Click to collapse
RSD Lite is fairly intuitive. But here's a guide I found that should help explain things fully: http://wiki.howardforums.com/index.php/How_to_flash_with_RSD_lite
Sent from my rooted Mayan Calendar
Apex_Strider said:
RSD Lite is fairly intuitive. But here's a guide I found that should help explain things fully: http://wiki.howardforums.com/index.php/How_to_flash_with_RSD_lite
Sent from my rooted Mayan Calendar
Click to expand...
Click to collapse
RSD lite 6.0 is out also. Thought I'd mention it since I haven't seen it posted anywhere.
RSD lite 6.0
https://hotfile.com/dl/174582400/60ad26d/RSDLite_6.0.rar.html
Mtk patch 20
https://hotfile.com/dl/174581768/b23cd63/MTK_Patch20_RSD_Lite_6.0).rar.html
Phew, got the phone up and running. I felt morally responsible as I'd rooted the phone for him just for fun
Thanks again to everyone who helped.
BTW, what's the correct way of removing busybox and unrooting?
mtnlion said:
RSD lite 6.0 is out also. Thought I'd mention it since I haven't seen it posted anywhere.
RSD lite 6.0
https://hotfile.com/dl/174582400/60ad26d/RSDLite_6.0.rar.html
Mtk patch 20
https://hotfile.com/dl/174581768/b23cd63/MTK_Patch20_RSD_Lite_6.0).rar.html
Click to expand...
Click to collapse
what is this Mtk patch??..what is it for???
devilhunter47 said:
what is this Mtk patch??..what is it for???
Click to expand...
Click to collapse
Nothing you need with phones like ours that use the ti omap family of processors. I really posted it more for devs.
athani said:
BTW, what's the correct way of removing busybox and unrooting?
Click to expand...
Click to collapse
Busybox is just a root privileged application, and can be uninstalled like any other: Settings>Apps>Mangage Apps> BusyBox Installer: Uninstall
I suppose un-rooting would depend on which rooting method you used. If it was the .bat file root method, you should have a 'click to unroot' .bat file that can be run to removed root...
apex_strider said:
busybox is just a root privileged application, and can be uninstalled like any other: Settings>apps>mangage apps> busybox installer: Uninstall
i suppose un-rooting would depend on which rooting method you used. If it was the .bat file root method, you should have a 'click to unroot' .bat file that can be run to removed root...
Click to expand...
Click to collapse
No, never ever ever uninstall busybox!!!! All you will remove by doing this is just remove the installer.apk. inside the apk you can actually uninstall busybox, but you will soft brick.
Well, I am downgrading to 4.0.4 but I got a couple of questions...
[Q #1] Should I do factory reset before or after downgrading?
[Q #2] Which method is more convenient?
[Q #3] Is it safe to downgrade from 4.1.2 to 4.0.4?
[Q #4] I am rooted. Will it make a conflict after the downgrade? Should I uninstall it?
Thank you for your help. I know I am still a noob but lately I am not comfortable with the OS 4.1.2 and want to have the old version back...
TH35KULL said:
Well, I am downgrading to 4.0.4 but I got a couple of questions...
[Q #1] Should I do factory reset before or after downgrading?
[Q #2] Which method is more convenient?
[Q #3] Is it safe to downgrade from 4.1.2 to 4.0.4?
[Q #4] I am rooted. Will it make a conflict after the downgrade? Should I uninstall it?
Thank you for your help. I know I am still a noob but lately I am not comfortable with the OS 4.1.2 and want to have the old version back...
Click to expand...
Click to collapse
little reading would of helped
read the returning to stock sticky, link in my sig
vincom said:
little reading would of helped
read the returning to stock sticky, link in my sig
Click to expand...
Click to collapse
I know I've seen all of your threads. But I still don't understand a couple of stuff. I would really appreciate if you could answer them.
Read the stickies dude
Sent from my HTC One using Tapatalk
xcrazydx said:
Read the stickies dude
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Ok I read them. Now I can't get into Odin mode... I am not pressing the power button and still boots into CWM recovery!
TH35KULL said:
Ok I read them. Now I can't get into Odin mode... I am not pressing the power button and still boots into CWM recovery!
Click to expand...
Click to collapse
read it again: from the sticky>
1. GETTING PHONE INTO DOWLOAD MODE(aka odin mode):
DO NOT TOUCH THE POWER BUTTON FOR THIS PROCEDURE.
Download mode is NOT the same as recovery mode
a. Remove and Reinsert the battery, have usb cable inserted to computer usb port but NOT to your phone until step (c).
b. ATT PHONES - Press and keep down both Volume Up and Volume Down keys simultaneously.
ROGERS PHONES - Press and keep down only the Volume Down key.
DO NOT RELEASE THE VOLUME KEY(S) UNTIL INSTRUCTED TO DO SO IN STEP (d)
c. While still holding the volume key(s) down insert the USB cable into your device.
The phone will turn itself on when usb cable is inserted. * DO NOT TOUCH THE POWER BUTTON *
d. When You see the screen warning you about installing a rom w/a yellow triangle RELEASE the volume key(s)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
e. 1ST PIC: Now press and release the volume "up" key, you should now be at the Download Mode screen w/odin recognizing your phone.
2ND PIC: this is also download/odin mode - the screen will display this when odin or kies has failed/not completed a previous flash, flash the firmware again w/odin and/or read "section #3 troubleshooting odin" below
...
Come on mates! Don't be jerks with him! He is a noob, of course. And your job here is not only develop ROMs and stuff. As part of this great community, you must explain <<Doesn't matter the times you've explained it.>> the newest people how to solve even the most simple problems. You can't expect to teach people with a lot of guides and stuff... They will obviously get confused! It's a simple requirement and doesn't harm anyone! Now, my noob mate, make sure to clean all Data and both Cache and Dalvik (that's the name I think.) before downgrading. I am quite sure that's the problem.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
xeiks said:
Come on mates! Don't be jerks with him! He is a noob, of course. And your job here is not only develop ROMs and stuff. As part of this great community, you must explain <<Doesn't matter the times you've explained it.>> the newest people how to solve even the most simple problems. You can't expect to teach people with a lot of guides and stuff... They will obviously get confused! It's a simple requirement and doesn't harm anyone! Now, my noob mate, make sure to clean all Data and both Cache and Dalvik (that's the name I think.) before downgrading. I am quite sure that's the problem.
Click to expand...
Click to collapse
This is the problem with XDA these days. XDA is not intended to be a site for people that aren't able to/don't want to teach themselves. This site was founded on the notion that people can and should teach themselves the skills to extricate themselves from the stranglehold of the manufacturers and OS providers. This is a development community full of self-taught gurus who are kind enough to share their work and knowledge with everyone else, with the hope that they carry on the learning tradition. People can't expect to have their hands held when there are perfectly acceptable guides and tutorials for practically every scenario. And note that it is no one's JOB to develop ROMs or offer troubleshooting-people are here because they love the community and development.
xeiks said:
Come on mates! Don't be jerks with him! He is a noob, of course. And your job here is not only develop ROMs and stuff. As part of this great community, you must explain <<Doesn't matter the times you've explained it.>> the newest people how to solve even the most simple problems. You can't expect to teach people with a lot of guides and stuff... They will obviously get confused! It's a simple requirement and doesn't harm anyone! Now, my noob mate, make sure to clean all Data and both Cache and Dalvik (that's the name I think.) before downgrading. I am quite sure that's the problem.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
fail, thats not the reason he cant get into dl mode, the guides are there for a reason, if its been answered and cant follow instructions then hows that not helping, and your answer says to me that u should do a little more reading, cmon its not that hard to do a little research
mrfeuss said:
This is the problem with XDA these days. XDA is not intended to be a site for people that aren't able to/don't want to teach themselves. This site was founded on the notion that people can and should teach themselves the skills to extricate themselves from the stranglehold of the manufacturers and OS providers. This is a development community full of self-taught gurus who are kind enough to share their work and knowledge with everyone else, with the hope that they carry on the learning tradition. People can't expect to have their hands held when there are perfectly acceptable guides and tutorials for practically every scenario. And note that it is no one's JOB to develop ROMs or offer troubleshooting-people are here because they love the community and development.
Click to expand...
Click to collapse
+1
we help because we like to not thats its a requirement, some effort is a requirement to be made by the newbs
vincom said:
fail, thats not the reason he cant get into dl mode, the guides are there for a reason, if its been answered and cant follow instructions then hows that not helping, and your answer says to me that u should do a little more reading, cmon its not that hard to do a little research.
Click to expand...
Click to collapse
Actually... I did what Xeiks told me and it worked. Now I am running OS 4.0.4 ICS. How's that possible Vincom?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
mrfeuss said:
This is the problem with XDA these days. XDA is not intended to be a site for people that aren't able to/don't want to teach themselves. This site was founded on the notion that people can and should teach themselves the skills to extricate themselves from the stranglehold of the manufacturers and OS providers. This is a development community full of self-taught gurus who are kind enough to share their work and knowledge with everyone else, with the hope that they carry on the learning tradition. People can't expect to have their hands held when there are perfectly acceptable guides and tutorials for practically every scenario. And note that it is no one's JOB to develop ROMs or offer troubleshooting-people are here because they love the community and development.
Click to expand...
Click to collapse
Well... Then why noobs join? I mean if it's intended for people with knowledge and skills why would noobs join if they wouldn't understand it?
This mate here is asking for something basic for you... But for him, it's kinda complicated. He's trying to learn from you guys... Te best when it's about this S II... Don't give him the link. With a simple "yes" and "no" will be ok. And then you can add the link.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
---------- Post added at 07:41 PM ---------- Previous post was at 07:30 PM ----------
vincom said:
fail, thats not the reason he cant get into dl mode, the guides are there for a reason, if its been answered and cant follow instructions then hows that not helping, and your answer says to me that u should do a little more reading, cmon its not that hard to do a little research
Click to expand...
Click to collapse
I'm not a developer mate. Not a Custom ROM and Android Development Fan. I'm just interested in making my phone better. I didn't read it or learned it. I had the same problems so when I first looked here I saw a comment yours saying "Factory Restore and clean Cache and Dalvik b4 u start" so I tried and it worked.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
TH35KULL said:
Actually... I did what Xeiks told me and it worked. Now I am running OS 4.0.4 ICS. How's that possible Vincom?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
great that u got odin to work.
ive used odin too many times to count and im telling you that nothing in the recovery or android operating system will prevent you from getting into dl mode other than driver issues, user error, bad flash(bricking) or hw failure.
why u succeeded now after wiping.......well it reminds me of daft punk's get lucky song