[Q] Answering calls with Home button - Galaxy 3 Q&A, Help & Troubleshooting

Hi everyone
After I've installed Kyrillos' v10 ROM, I can't set Home button for call answering. I searched everywhere in settings and CM7 settings - it's just gone.
My question is: would be anyone so nice and post (write?) an app/script that'll let me answer my calls with Home button? Small, but makes a big difference for me
Regards

I am also missing this feature a lot from the stock ROM..in fact I had posted about this few days back in CM7 thread, but got no solution..in case you find something, please let me know

That was in the stock ROM? You mean Froyo? I didn't see it... where is it?

-Vinne2- said:
That was in the stock ROM? You mean Froyo? I didn't see it... where is it?
Click to expand...
Click to collapse
I am on Kyrillos 9.4 now but I think it was definitely there on stock Froyo...
Try (this is on Kyrillos 9.4 but I am pretty sure it was the same on Froyo):
Settings/Call settings/all calls/answering call/
enable answering mode and then enable answering key...
hope this helps

Yep. it definitely was available on stock Froro (even Eclair i think?), now it disappeared. Small thing, but makes a big difference for me I tried to try an app that could replace that feature, but I dind't find anything worth attention :/

ending calls with power button works but answering with home key realy missing otherways great rom from kyrillos
Sent from my GT-I5800 using XDA App

Related

Issue i got with ALL roms...

no matter what rom i try to use, ( i got tilt by the way) when i send sms or just type anything with the keyboard it doesn't always register all my keys. i press them firm and slow and yet it doesn't Always take the key i pressed. have to wait a min or two. any way to fix this?
right now im using viper rom.
any one else get this problem?
kingofall00 said:
no matter what rom i try to use, ( i got tilt by the way) when i send sms or just type anything with the keyboard it doesn't always register all my keys. i press them firm and slow and yet it doesn't Always take the key i pressed. have to wait a min or two. any way to fix this?
right now im using viper rom.
any one else get this problem?
Click to expand...
Click to collapse
Sounds like bad keyboard?
this is the weird thing, keys work fine when i first install a fast rom. it seems like phone slows down and lags a bit. im 100% keys work fine as they do when i go to a 6.0 rom. it is with 6.1 that gives me the problems.
srry i should have said with 6.1 roms.
Ive noticed the same thing with 6.1 roms.... And really the threaded SMS, and maybe a slightly quiker boot time is all i notice better on the 6.1 roms
ok well maybe u can help me with my other issue.
how do you find out what hardSPL you have on your phone?
i dont remember what one i put on there. and i tried putting new 3.56 just want to make sure it is on there and was put on right.
try disabling xt9....that made a huge difference for me...
I disabled XT9, and while it made texting easier... I always have to proof read before i send.
O ther wis it look s like thi s.....
thank you . i tried that, maybe i need to make sure most if not all programs are closed. thanx.
kingofall00 said:
thank you . i tried that, maybe i need to make sure most if not all programs are closed. thanx.
Click to expand...
Click to collapse
actually what will help the most is to set suggested words to 0, using kaisertweaks or advanced config, but of course that answer should have been easy to find as i've answered it personally at least 20+ times. Also disabling autocorrection seems to help too, but i think that the suggested words is the most significant improvement.
I have the same problem with my tilt. Dutty 6.1 hybrid. My problem seems to be limited to a slow space key though. so texts look like:
thisi s howm any of myt exts look.
I am going to try some of the suggestions and see what works.
psuarmy said:
I have the same problem with my tilt. Dutty 6.1 hybrid. My problem seems to be limited to a slow space key though. so texts look like:
thisi s howm any of myt exts look.
I am going to try some of the suggestions and see what works.
Click to expand...
Click to collapse
try installing this cab:
http://www.4shared.com/file/59325516/b1bb4ea1/DuttyThroys_Disable_XT9.html
although i'm not sure it will work on his 29th release
mbarvian said:
try installing this cab:
http://www.4shared.com/file/59325516/b1bb4ea1/DuttyThroys_Disable_XT9.html
although i'm not sure it will work on his 29th release
Click to expand...
Click to collapse
There is no "on the fly" word suggest or spell check with this ROM.
Problem with keyboard and screen
I too have had problems with the hardware keyboard. I have tried 3 different roms, all with the same problems. Disabling T9 does help, but doesnt fix it entirely. I have also had a problem with screen taps not being recognized.
In both instances, it appears the phone is busy running another process and it takes a few seconds for it to focus on the program I have running. I have checked taskmanager when this happens and the only running program is the one im using.. Perhaps a program that runs on startup in the background?

Menu unlock fix? DC 2.07

I've tried searching, but cannot find a fix. My phone always gets unlocked in my pocket and it's annoying. I know that another ROM has the ability to stop the phone's ability to unlock by pressing the menu button. Is there anyway to get this fixed without adding a a different kind of launcher or modifying the look of the original theme? Any help would be appreciated. Thanks in advance.
It's on the front page of the forum.
http://forum.xda-developers.com/showthread.php?t=659181
orris said:
I've tried searching, but cannot find a fix. My phone always gets unlocked in my pocket and it's annoying. I know that another ROM has the ability to stop the phone's ability to unlock by pressing the menu button. Is there anyway to get this fixed without adding a a different kind of launcher or modifying the look of the original theme? Any help would be appreciated. Thanks in advance.
Click to expand...
Click to collapse
I just flashed it. I'll be nice and link you...
http://geekfor.me/fixes/bugfixes-requests-lock-screens/
More specifically...
http://link.geekfor.me/htclocknmenu
Another pocket call to 911 and I'm sure I'd be in jail.
I saw that, but do you not need to remove the HTCLockScreen and have a different layout as I stated? I just wanted to know if there was a fix without modifying the layout, changing the look or removing any functionality.
And thanks for being nice about it, MrTrip.
edit: NM, misread.
MrTrip said:
Another pocket call to 911 and I'm sure I'd be in jail.
Click to expand...
Click to collapse
Around here they just fine you for that... (Although I hear it's a steep enough fine that you might actually prefer sleeping the night in jail....)

[Problem] JBOOGIE'S LIQUIDARC

So if anyone is using jboogie's liquidarc rom, i have a question for you: can anyone succesfully run setcpu and milestone or setvsel and successfully overclock/undervolt and scale the cpu? when i do those and run the scaling script from sorensim's guide on modifying the defy, my home and search button stop working, haptic feedback works on them, but they dont do anything when pressed. I love this rom but i cant use it if those 2 keys dont work. ive wiped before and after restoring the rom, flashed the sbf 3.4.11 first and then restored, and then the boot sbf, and still no progess. any tips?
Is usb debugging enabled or disabled? Not sure if this will help, but worth a try to switch back and forth to see if it helps. I have been using liquidarc for a few weeks now and loving it with no real issues to speak of. I was using milestone (what came with rom), but have since removed and gone back to setvsel and have overclocked/undervolted without any issues. All my buttons work.
You might need to redo the steps, and download the files again as perhaps a file was corrupted during download/installation?
i dont see how usb debugging could be a problem, but ill try
I popped onto modmymobile...looks like jboogie just replied to your question.
darule_2011 said:
I popped onto modmymobile...looks like jboogie just replied to your question.
Click to expand...
Click to collapse
yeah i just saw, thanks for replying though
well problem still happens, dosent matter if i use setcpu, milestone, or setvsel, dosent matter if i dont overclock, just cpu scaling, it still happens
I had to shift to his wonderful Korean rom only because of this issue. Any app I use, end up with nonfunctioning home button and search button.
chaihg said:
I had to shift to his wonderful Korean rom only because of this issue. Any app I use, end up with nonfunctioning home button and search button.
Click to expand...
Click to collapse
ok jboogie showed me a fix, dont touch vsel or threshold and it should work perfectly.
zencoran said:
ok jboogie showed me a fix, dont touch vsel or threshold and it should work perfectly.
Click to expand...
Click to collapse
? I use SetvSel and it works perfectly..
I change the threshold to 84% and change completely the others.. They're still working. I got this problem too with Pays-Rom 5.1. The home button still had haptic feedback, but didn't function.
WIIstpM said:
? I use SetvSel and it works perfectly..
I change the threshold to 84% and change completely the others.. They're still working. I got this problem too with Pays-Rom 5.1. The home button still had haptic feedback, but didn't function.
Click to expand...
Click to collapse
jboogie told me not to touch the threshold and it should be fine so idk
i got no problem with LiquidArc and running SetVsel

WHATS THE BEST WAY TO GET CYANOGEN 7+ onto me525 without killing LED?

I am trying to fiigure out the best and safest way to get cyanogen 7 onto my me525, and I am not interezted in warranty as I already have water damage, but i dont want to kill led and i need to have fully functional gapps in China...
Thanks for any guidance...
cm7 works on me525 and your flash light wont get bricked
gapps are also there you must install them seperate..
i tought that chines roms bricks mb525 led flashlight?
And I doubt this thread is necessary when one on CM7 exist ?! And the CAPS text is TOO MUCH !
I searched the other thread and couldnt find it. I went ahead and did the nordic , then c7 and baseband switcher, and everything seems ok... the screen powers off in a scary way that looks as if its nto good for the phone....it sucks missing the voice input keyboard and the call recorder . Mainly the voice input keyboard.
AntiNSA said:
I searched the other thread and couldnt find it. I went ahead and did the nordic , then c7 and baseband switcher, and everything seems ok... the screen powers off in a scary way that looks as if its nto good for the phone....it sucks missing the voice input keyboard and the call recorder . Mainly the voice input keyboard.
Click to expand...
Click to collapse
for the screen power off animation... u can disable this by going into settings--> launcher setting---> screen animation disable..
easy peasy..
Its just an animation..
stay cool :O

Question regarding Synergy Rom

This would seem to fit better in the thread about the Synergy rom but as a new member I'm not allowed to post in that subsection.
Does anyone know how to set up Google Now or S voice such that when i double tap the home button it brings either of those programs up? The weird thing is that in S voice settings the double tap is set to open S Voice it actually brings up Google's Voice Dialer.
I am reporting a possible bug regarding the inability to get a GPS lock after flashing Synergy 1.6. Prior to this I had a stock phone and was unrooted. I made sure to fully wipe before flashing the rom. I just wanted to throw a " me too" in there, i'm sure the devs will iron it out.
Also, is there any plan to bring back the gradual ring increase (in a zip form) that was removed in Synergy 1.5?
Thanks,
SuperKerp said:
This would seem to fit better in the thread about the Synergy rom but as a new member I'm not allowed to post in that subsection.
Does anyone know how to set up Google Now or S voice such that when i double tap the home button it brings either of those programs up? The weird thing is that in S voice settings the double tap is set to open S Voice it actually brings up Google's Voice Dialer.
I am reporting a possible bug regarding the inability to get a GPS lock after flashing Synergy 1.6. Prior to this I had a stock phone and was unrooted. I made sure to fully wipe before flashing the rom. I just wanted to throw a " me too" in there, i'm sure the devs will iron it out.
Also, is there any plan to bring back the gradual ring increase (in a zip form) that was removed in Synergy 1.5?
Thanks,
Click to expand...
Click to collapse
An answer to your first question is yes, they are working on a script to launch google now instead of S voice. I believe it will be implemented in 1.7
the GPS is a known issue, they still arent able to pinpoint it but they flashed ALL stock GPS files back in 1.6 so there really should be no issue..they are still trying to pinpoint this out though because some users are still having issues (I am thankfully not one of them). Download GPS test, go outside and test it.
As for the gradual ring, i'm not sure. They listen to a lot of requests but since they get A LOT, its going to be hard to implement everything.
SuperKerp said:
This would seem to fit better in the thread about the Synergy rom but as a new member I'm not allowed to post in that subsection.
Does anyone know how to set up Google Now or S voice such that when i double tap the home button it brings either of those programs up? The weird thing is that in S voice settings the double tap is set to open S Voice it actually brings up Google's Voice Dialer.
I am reporting a possible bug regarding the inability to get a GPS lock after flashing Synergy 1.6. Prior to this I had a stock phone and was unrooted. I made sure to fully wipe before flashing the rom. I just wanted to throw a " me too" in there, i'm sure the devs will iron it out.
Also, is there any plan to bring back the gradual ring increase (in a zip form) that was removed in Synergy 1.5?
Thanks,
Click to expand...
Click to collapse
Might want to shoot StrumerJohn a PM, he posted he might have some steps to resolve the issue in the Synergy ROM forum here is the post:
http://forum.xda-developers.com/showthread.php?p=30037619&highlight=gps#post30037619
as i am new to the forums as well, i cannot post to the dev thread either.
i am using the synergy rom 1.6 on my verizon s3 as well and i was going to ask them to please include the GoogleEars.apk already installed in one of their future releases.
i wouldn't think it would be too hard to add since it's only 1 .apk file to add to the system/app location that needs to be included.
the song search widget far surpasses shazam imo.
SuperKerp said:
This would seem to fit better in the thread about the Synergy rom but as a new member I'm not allowed to post in that subsection.
Does anyone know how to set up Google Now or S voice such that when i double tap the home button it brings either of those programs up? The weird thing is that in S voice settings the double tap is set to open S Voice it actually brings up Google's Voice Dialer. .....,
Click to expand...
Click to collapse
That Google voice dialer is the only bad thing about the current synergy. It'll randomly dial anyone. Anyone know how to freeze it?
Sent from my Galaxy Nexus using Tapatalk 2
synergyrom 1.6 rooted with no root.
Wipe data factory reset, flash synergyrom 1.6. Flash imo kernel.
Installed superuser elite. Says I'm rooted but! Fails to gain root access on update. Also supersu will not install... how can I have root and not be rooted is the question/problem I am facing. Going to flash 1.7 now.. hopefully issue is resolved. Figured I would mention in case others having same problem... attempted searching for others with the same problem and was unlucky with results..hopefully I'm not a broken record. Thanks taddmmd.
Verizon sgs 3
Figured it out....if on autoresponse it fails... but now Ion autoresponse1.7 I cannot send messages that are long... aka mms... I have data and signal.
I'm going to try to full wipe and reinstall....
love this rom
I love this from so smooth and fast everything is a fingers point and the ability to change things is great
SuperKerp said:
Does anyone know how to set up Google Now or S voice such that when i double tap the home button it brings either of those programs up? The weird thing is that in S voice settings the double tap is set to open S Voice it actually brings up Google's Voice Dialer.
Thanks,
Click to expand...
Click to collapse
Synergy 1.7 adds in the ability to choose your double-tap app. You have to make sure to clear app defaults in S-Voice before doing this, though.
tadmmd said:
Verizon sgs 3
Figured it out....if on autoresponse it fails... but now Ion autoresponse1.7 I cannot send messages that are long... aka mms... I have data and signal.
I'm going to try to full wipe and reinstall....
Click to expand...
Click to collapse
Synergy 1.7 has a messaging bug. Flash the zip eschelon provided and you should be good to go.
SuperKerp said:
This would seem to fit better in the thread about the Synergy rom but as a new member I'm not allowed to post in that subsection.
Does anyone know how to set up Google Now or S voice such that when i double tap the home button it brings either of those programs up? The weird thing is that in S voice settings the double tap is set to open S Voice it actually brings up Google's Voice Dialer.
I am reporting a possible bug regarding the inability to get a GPS lock after flashing Synergy 1.6. Prior to this I had a stock phone and was unrooted. I made sure to fully wipe before flashing the rom. I just wanted to throw a " me too" in there, i'm sure the devs will iron it out.
Also, is there any plan to bring back the gradual ring increase (in a zip form) that was removed in Synergy 1.5?
Thanks,
Click to expand...
Click to collapse
The responses to GPS problems on that board consist mainly of "re-flash". Have you tried that?
DomeHead said:
The responses to GPS problems on that board consist mainly of "re-flash". Have you tried that?
Click to expand...
Click to collapse
Also, just to be safe check MD5 as well. I've had some strange behavior related to a ROM that didn't download correctly but installed anyway. A fresh download and reflash fixed everything.

Categories

Resources