Database Info

[ROOT + CWM 6.0.1.5 or 5.5.0.4] Lenovo IdeaPad A2107A (-H)

The following post is just a TESTED collection of tools and procedures that were found over at XDA forum or elsewhere on the Internet.
I do not take any credit for all those nice scripts and manuals - I just put them together for the young community of IdeaPad A2107A owners.
Below you will find methods of getting root and Clockwork Mod Recovery v 6.0.1.5 on IdeaPad A2107A (I own the -H version with dual SIM and ca. 4 GB of internal memory).
All processes were tested by me and are working well but obviously you are responsible for your actions.
My device runs on ICS 4.0.3, compilation A2107A-H_S341 and has a couple of European languages (tablet bought in Poland).
What you need is installed ADB drivers so the PC can "talk" to you tablet. You will find a lot of guides on the net - just make sure Windows device manager shows Android Device - Android ADB Interface or something close to that.
I also advise to enable USB debugging and allow installing applications from unknown sources - all in your tablet's settings.
Once you make sure you have done the above you're good to go.
So let's go!
Download this: http://www.mediafire.com/download.php?5o7dm16d430lwal (un7zip) and read as follows:
1 - Root
The method I chose is for patient people - the device will reboot 3 times during this process.
a) connect your tablet to the PC, open "1 - 4.03root" folder and run "root.bat"
b) just after you run the .bat the device will reboot and in the command prompt you will see "Press any key to continue . . ." - WAIT until the tablet boots up completely. When you see the lockcreen THEN hit a key in the command prompt.
c) the above will happen 2 more times - always WAIT for the tablet to boot completely.
This process will install Superuser and RootExplorer so find those apps and see if the root works.
2 - Backup the whole ROM that is on your device - will be useful with making the CWM recovery.img file.
For this you will need ca. 2GB of memory so I advise at least 4GB sdcard.
I also advise to go to the settings and in the memory tab set the "Default write disk" to "SD storage" - this makes the microSD the primary "sdcard" - makes things easier with backups etc.
ALSO in the settings set the screen to stay on for at least 10 minutes - this is how long it will take to do the full ROM dump - important to keep the script alive.
To avoid any issues turn the flight mode on so no new "data" is received by the device.
Once you're done open "2 - Backup" folder from my 7zip and copy the "gscript" folder to the root of your sdcard. Now install "GScriptLite.apk" and run it (needs root access!).
In the app hit the menu button and pick "Add Script" ->"Need SU?" must be checked -> "Load file" -> select "back_mt6575_a4_v2c.sh" -> save and click the script.
As I said - wait ca 10 minutes for the scrip to finish. Now you will have a nice backup in the SD - look for "backup_v2" folder - copy it to your PC.
3 -Mobileuncle - it's in the Google Play Store but you won't find it with our tablet - supposedly incompatible. Bull*hit!
Open "3 - Mobileuncle" folder, copy the apk to your device and install. We will come back to this later.
4 - How about the CWM? Yes!
Open "4 - CWM 6015" - you will find a PDF there - read the instructions. The subfolder "michfood" contanis all the scripts you need so you don't have to download anything else.
ATTENTION - the "recovery.img" used in this process is YOUR "recovery.img" that you dumped in step 2. So find your backup from step 2 and the original "recovery.img" from your ROM.
ATTENTION - our device is MT6575 so you pick nr 1 in the command prompt.
5 - Once you have the new "recovery.img" with CWM (it is actually smaller than the original file) copy it to the root of your sdcard.
Now open the Mobileuncle Tools you installed in step 3 and hit "Recovery Update".
There, at the very top of the screen you will see your new CWM recovery file - hit it and then confirm the update. It takes a second!
Now you will be asked to boot into recovery mode - go ahead, try it
If the tablet booted in CWM then you are all set!
REMEMBER - to go into the recovery mode while the device is OFF you need to:
1 - hold the power button for ca 3 seconds
2 - let it go and in the same moment press BOTH Vol + and Vol - buttons.
REMEMBER 2 - the CWM 6.0.1.5 makes backups in a bit different way than the old CWM - read here :http://forum.xda-developers.com/showthread.php?t=1846446
It also appears that the key to modding our tablet is the MT6575 processor - a lot of tools just need to support this processor, the device itself is not so important.
All the best.
Mike.
P.S.
A little film how it looks: http://www.youtube.com/watch?v=tM3Sdwf2i4M
------------------------------------------------- UPDATE 1 ---------------------------------------------------------
For those who are running the same compilation as I am (A2107A-H_S341):
- you can download my recovery file from here: http://www.mediafire.com/download.php?um372gh6ayf6t6w
To use it you need to do:
1 - Root
(optional backup with GScriptLite.apk)
2 - flash the recovery file with Mobileuncle
Be careful and make sure you have a backup if you want to try this file with another compilation.
Cheers.
------------------------------------------------- UPDATE 2 ---------------------------------------------------------
Tested (by user: manwithmanypiercings) USB drivers are in this post: http://forum.xda-developers.com/showpost.php?p=34651039&postcount=51
------------------------------------------------- UPDATE 3 ---------------------------------------------------------
I think there is even easier way than the one I originally posted above.
BUT I cannot be sure that it will work with all of you - the reason is that I made so many changes to my A2107A-H that I do not know whether this method works "just because it's universal" or because my tablet was tweaked far enough.
On the other hand when you consider it reasonably it looks like it's quite simple and there is no particular reason why it shouldn't work with a stock A2107A.
So...
What you need:
1 - this package: http://www.mediafire.com/download.php?fbuzi5xjofs7vgf
2 - PC running Windows 7 would be the best (7 gave me no problems at all - takes 1 minute to do it). I made it on Windows 8 as well but there is a lot more fuss to install the proper driver.
What you do:
1 - turn on USB Debugging on your tablet
2 - connect the tablet to your PC (if it's the 1st, some default drivers will install - that's ok)
3 - tap on the notifications area in the "Connect as" change to "MTP" - this is quite important !
4 - from the downloaded package run the "Flash_tool.exe"
- click "Scatter-loading" on the right and find "MT6575_Android_scatter_emmc.txt"
- in the list in the lower part of the window you MUST have the "PRELOADER" (super important) and "RECOVERY" ticked and leading to the correct files. The PRELOADER = "preloader_lenovo75_a2_ics.bin" (in the package) and the RECOVERY is the recovery file of your choice -> there are 3 in the package - pick the one you want. You can flash them over and over so if you don't like one then try the other.
5 - click "Download" above - you will see a prompt saying that not all images were loaded - that is fine - we only want to flash the RECOVERY - so click "Yes"
6 - now the Flash tool is waiting for the tablet - press "reset" on the back - Windows will recognize a new device (and WILL NOT find the driver unless you have done it before) - no worries, you have the correct driver.
7 - open Windows "Device manager" and locate the MT65..... unrecognised device -> update / install driver -> point Windows to "USB VCOM Driver" folder from the package and pick your system. My Windows 7 found the driver on the spot but asked to confirm the install - "insecure" driver - I obviously clicked "install anyway" and so should you.
8 - once the driver is loaded the Flash tool will flash the new recovery file - you will see some colour progress bars in the program - at the end you should see a green circle.
That is it. Unplug the tablet, press reset on the back and you can now enter the recovery mode.
FUN FACT: the "reset" button on the back is not really a reset button, it's more like physical cut off button to temporarily disconnect the battery.

I have the Lenovo A2107A under Vodafone's brand Vodafone Smart Tab II 7
It has Android version 4.0.4 and compilation: A2107A_A404_010_002_120913_VODA
Imanaged to root it and install CWM using this thread. But somehow I was not able to create the CWM modded recovery.img
I used the one provided here and it worked fine.
Thanks for this.

I can't connect tablet to PC
csns said:
The following post is just a TESTED collection of tools and procedures that were found over at XDA forum or elsewhere on the Internet.
I do not take any credit for all those nice scripts and manuals - I just put them together for the young community of IdeaPad A2107A owners.
Below you will find methods of getting root and Clockwork Mod Recovery v 6.0.1.5 on IdeaPad A2107A (I own the -H version with dual SIM and ca. 4 GB of internal memory).
All processes were tested by me and are working well but obviously you are responsible for you actions.
My device runs on ICS 4.0.3, compilation A2107A-H_S341 and has a couple of European languages (tablet bought in Poland).
What you need is installed ADB drivers so the PC can "talk" to you tablet. You will find a lot of guides on the net - just make sure Window device manager shows Android Device - Android ADB Interface or something close to that.
I also advise to enable USB debugging and allow installing applications from unknown sources - all in your tablet's settings.
Once you make sure you have done the above you're good to go.
So let's go!
Download this: http://www.mediafire.com/download.php?5o7dm16d430lwal (un7zip) and read as follows:
1 - Root
The method I chose is for patient people - the device will reboot 3 times during this process.
a) connect your tablet to the PC, open "1 - 4.03root" folder and run "root.bat"
b) just after you run the .bat the device will reboot and in the command prompt you will see "Press any key to continue . . ." - WAIT until the tablet boots up completely. When you see the lockcreen THEN hit a key in the command prompt.
c) the above will happen 2 more times - always WAIT for the tablet to boot completely.
This process will install Superuser and RootExplorer so find those apps and see if the root works.
2 - Backup the whole ROM that is on your device - will be useful with making the CWM recovery.img file.
For this you will need ca. 2GB of memory so I advise at least 4GB sdcard.
I also advise to go to the settings and in the memory tab set the "Default write disk" to "SD storage" - this makes the microSD the primary "sdcard" - makes things easier with backups etc.
ALSO in the settings set the screen to stay on for at least 10 minutes - this is how long it will take to do the full ROM dump - important to keep the script alive.
Once you're done open "2 - Backup" folder from my 7zip and copy the "gscript" folder to the root of your sdcard. Now install "GScriptLite.apk" and run it (needs root access!).
In the app hit the menu button and pick "Add Script" ->"Need SU?" must be checked -> "Load file" -> select "back_mt6575_a4_v2c.sh" -> save and click the script.
As I said - wait ca 10 minutes for the scrip to finish. Now you will have a nice backup in the SD - look for "backup_v2" folder - copy it to your PC.
3 -Mobileuncle - it's in the Google Play Store but you won't find it with our tablet - supposedly incompatible. Bull*hit!
Open "3 - Mobileuncle" folder, copy the apk to your device and install. We will come back to this later.
4 - How about the CWM? Yes!
Open "4 - CWM 6015" - you will find a PDF there - read the instructions. The subfolder "michfood" contanis all the scripts you need so you don't have to download anything else.
ATTENTION - the "recovery.img" used in this process is YOUR "recovery.img" that you dumped in step 2. So find your backup from step 2 and the original "recovery.img" from your ROM.
ATTENTION - our device is MT6575 so you pick nr 1 in the command prompt.
5 - Once you have the new "recovery.img" with CWM (it is actually smaller than the original file) copy it to the root of your sdcard.
Now open the Mobileuncle Tools you installed in step 3 and hit "Recovery Update".
There, at the very top of the screen you will see your new CWM recovery file - hit it and then confirm the update. It takes a second!
Now you will be asked to boot into recovery mode - go ahead, try it
If the tablet booted in CWM then you are all set!
REMEMBER - to go into the recovery mode while the device is OFF you need to:
1 - hold the power button for ca 3 seconds
2 - let it go and in the same moment press BOTH Vol + and Vol - buttons.
REMEMBER 2 - the CWM 6.0.1.5 makes backups in a bit different way than the old CWM - read here :http://forum.xda-developers.com/showthread.php?t=1846446
It also appears that the key to modding our tablet is the MT6575 processor - a lot of tools just need to support this processor, the device itself is not so important.
All the best.
Mike.
P.S.
A little film how it looks: http://www.youtube.com/watch?v=tM3Sdwf2i4M
------------------------------------------------- UPDATE 1 ---------------------------------------------------------
For those who are running the same compilation as I am (A2107A-H_S341):
- you can download my recovery file from here: http://www.mediafire.com/download.php?um372gh6ayf6t6w
To use it you need to do:
1 - Root
(optional backup with GScriptLite.apk)
2 - flash the recovery file with Mobileuncle
Be careful and make sure you have a backup if you want to try this file with another compilation.
Cheers.
Click to expand...
Click to collapse
csns thanks for your guide
Unfortunately I can't connect my tablet to pc in USB debbuging mode. I tried a lot of drivers from net but without success.. Pls let me know the right way to root my tablet.

optical99 said:
csns thanks for your guide
Unfortunately I can't connect my tablet to pc in USB debbuging mode. I tried a lot of drivers from net but without success.. Pls let me know the right way to root my tablet.
Click to expand...
Click to collapse
Hi there,
Try those drivers: http://www.mediafire.com/?vx2hyv7dpwlmeyy
They come from the current Android SDK but I am running a 64 bit system and I'm not sure if those drivers will work with 32 bit systems.
Fingers crossed!

I tried with yor recommend dirvers and with a lot of others and doesn't work. I have to unrecognised denices in Device Manager - A2107A-H and MTP.
I am very upset about Lenovo because their support doesn't exist.

optical99 said:
I tried with yor recommend dirvers and with a lot of others and doesn't work. I have to unrecognised denices in Device Manager - A2107A-H and MTP.
I am very upset about Lenovo because their support doesn't exist.
Click to expand...
Click to collapse
I had to use the PDANET from this link.
http://forum.xda-developers.com/showthread.php?t=1982334&page=6
Should be the first post.
Sent from my Samsung Galaxy Note running JellyBeer using Xparent ICS Blue Tapatalk 2

First of all, a ton of thanx to csns for posting this detailed procedure along with all required scripts and tools...
I have just one question...Which Modified ROM did you install as I see you have unlocked calling feature in the video you posted???
I asked because the MOD ROM by pemergency in the other thread is for the 16 GB and creates some issues in the device...But your's is 4 GB, as is mine...
Thanx in advance

makbro said:
First of all, a ton of thanx to csns for posting this detailed procedure along with all required scripts and tools...
I have just one question...Which Modified ROM did you install as I see you have unlocked calling feature in the video you posted???
I asked because the MOD ROM by pemergency in the other thread is for the 16 GB and creates some issues in the device...But your's is 4 GB, as is mine...
Thanx in advance
Click to expand...
Click to collapse
I'm glad you find my post useful.
As for the calling feature - it's not actually working
You see, to have the calling app (in other words "the phone" app) in the app drawer all you need to do is change one tiny value in framework-res.apk.
This value is telling the system weather the whole device is supposed to handle voice calls or not. I just tricked the system to make the Phone.apk visible but there is a lot more do be done in order to make a real call over the cellular network.
I've just had this tablet for a week and I didn't have much time to dig into this topic. Let's see what the weekend brings
Be patient, I think it's just a matter of time when someone posts a user friendly guide... Or search yourself and share what you find with the community.
Take care.

works fine
manwithmanypiercings
I have gained acces to tabled with PDAnet drivers...thanks a lot
csns
I followed all steps and installed CWM 6015. Very nice tutorial...I thought it's simpliest way...respect for your job

optical99 said:
manwithmanypiercings
I have gained acces to tabled with PDAnet drivers...thanks a lot
csns
I followed all steps and installed CWM 6015. Very nice tutorial...I thought it's simpliest way...respect for your job
Click to expand...
Click to collapse
Glad I could help by showing the link. Glad you got everything else taken care of.

This is an awesome post! Thak you very much.

Need help at step 4
csns said:
The following post is just a TESTED collection of tools and procedures that were found over at XDA forum or elsewhere on the Internet.
I do not take any credit for all those nice scripts and manuals - I just put them together for the young community of IdeaPad A2107A owners.
Below you will find methods of getting root and Clockwork Mod Recovery v 6.0.1.5 on IdeaPad A2107A (I own the -H version with dual SIM and ca. 4 GB of internal memory).
All processes were tested by me and are working well but obviously you are responsible for your actions.
My device runs on ICS 4.0.3, compilation A2107A-H_S341 and has a couple of European languages (tablet bought in Poland).
What you need is installed ADB drivers so the PC can "talk" to you tablet. You will find a lot of guides on the net - just make sure Windows device manager shows Android Device - Android ADB Interface or something close to that.
I also advise to enable USB debugging and allow installing applications from unknown sources - all in your tablet's settings.
Once you make sure you have done the above you're good to go.
So let's go!
Download this: http://www.mediafire.com/download.php?5o7dm16d430lwal (un7zip) and read as follows:
1 - Root
The method I chose is for patient people - the device will reboot 3 times during this process.
a) connect your tablet to the PC, open "1 - 4.03root" folder and run "root.bat"
b) just after you run the .bat the device will reboot and in the command prompt you will see "Press any key to continue . . ." - WAIT until the tablet boots up completely. When you see the lockcreen THEN hit a key in the command prompt.
c) the above will happen 2 more times - always WAIT for the tablet to boot completely.
This process will install Superuser and RootExplorer so find those apps and see if the root works.
2 - Backup the whole ROM that is on your device - will be useful with making the CWM recovery.img file.
For this you will need ca. 2GB of memory so I advise at least 4GB sdcard.
I also advise to go to the settings and in the memory tab set the "Default write disk" to "SD storage" - this makes the microSD the primary "sdcard" - makes things easier with backups etc.
ALSO in the settings set the screen to stay on for at least 10 minutes - this is how long it will take to do the full ROM dump - important to keep the script alive.
To avoid any issues turn the flight mode on so no new "data" is received by the device.
Once you're done open "2 - Backup" folder from my 7zip and copy the "gscript" folder to the root of your sdcard. Now install "GScriptLite.apk" and run it (needs root access!).
In the app hit the menu button and pick "Add Script" ->"Need SU?" must be checked -> "Load file" -> select "back_mt6575_a4_v2c.sh" -> save and click the script.
As I said - wait ca 10 minutes for the scrip to finish. Now you will have a nice backup in the SD - look for "backup_v2" folder - copy it to your PC.
3 -Mobileuncle - it's in the Google Play Store but you won't find it with our tablet - supposedly incompatible. Bull*hit!
Open "3 - Mobileuncle" folder, copy the apk to your device and install. We will come back to this later.
4 - How about the CWM? Yes!
Open "4 - CWM 6015" - you will find a PDF there - read the instructions. The subfolder "michfood" contanis all the scripts you need so you don't have to download anything else.
ATTENTION - the "recovery.img" used in this process is YOUR "recovery.img" that you dumped in step 2. So find your backup from step 2 and the original "recovery.img" from your ROM.
ATTENTION - our device is MT6575 so you pick nr 1 in the command prompt.
5 - Once you have the new "recovery.img" with CWM (it is actually smaller than the original file) copy it to the root of your sdcard.
Now open the Mobileuncle Tools you installed in step 3 and hit "Recovery Update".
There, at the very top of the screen you will see your new CWM recovery file - hit it and then confirm the update. It takes a second!
Now you will be asked to boot into recovery mode - go ahead, try it
If the tablet booted in CWM then you are all set!
REMEMBER - to go into the recovery mode while the device is OFF you need to:
1 - hold the power button for ca 3 seconds
2 - let it go and in the same moment press BOTH Vol + and Vol - buttons.
REMEMBER 2 - the CWM 6.0.1.5 makes backups in a bit different way than the old CWM - read here :http://forum.xda-developers.com/showthread.php?t=1846446
It also appears that the key to modding our tablet is the MT6575 processor - a lot of tools just need to support this processor, the device itself is not so important.
All the best.
Mike.
P.S.
A little film how it looks: http://www.youtube.com/watch?v=tM3Sdwf2i4M
------------------------------------------------- UPDATE 1 ---------------------------------------------------------
For those who are running the same compilation as I am (A2107A-H_S341):
- you can download my recovery file from here: http://www.mediafire.com/download.php?um372gh6ayf6t6w
To use it you need to do:
1 - Root
(optional backup with GScriptLite.apk)
2 - flash the recovery file with Mobileuncle
Be careful and make sure you have a backup if you want to try this file with another compilation.
Cheers.
------------------------------------------------- UPDATE 2 ---------------------------------------------------------
Tested (by user: manwithmanypiercings) USB drivers are in this post: http://forum.xda-developers.com/showpost.php?p=34651039&postcount=51
Click to expand...
Click to collapse
Hi csns,
Sorry to bother you but when I try drag and drop my original "recovery.img" to "cwmr 6015.bat" in the "michfood" folder, I get a warning message "System cannot find the specified file "C:\users\....\recovery.img" "recovery" and the bat script exits...I have tried the following:-
1. Copy the folder and file "michfood" and my original "recovery.img" file in all possible alternate locations of my PC including desktop as shown in the pdf tutorial in "michfood" folder.
2. The permissions for both folders is "Full Control" for all users.
3. Files not hdden or protected.
4. Also turned off my antivirus and firewall.
No luck....Please help !!! Thanx in advance

makbro said:
Hi csns,
Sorry to bother you but when I try drag and drop my original "recovery.img" to "cwmr 6015.bat" in the "michfood" folder, I get a warning message "System cannot find the specified file "C:\users\....\recovery.img" "recovery" and the bat script exits...I have tried the following:-
1. Copy the folder and file "michfood" and my original "recovery.img" file in all possible alternate locations of my PC including desktop as shown in the pdf tutorial in "michfood" folder.
2. The permissions for both folders is "Full Control" for all users.
3. Files not hdden or protected.
4. Also turned off my antivirus and firewall.
No luck....Please help !!! Thanx in advance
Click to expand...
Click to collapse
Well, this happened to me once and I think the reason was that the path was too long - I guess it may have something to do with the fact that the .bat is a simple "program" and can have some problems with handling long paths.. specially with "national" character in them.
Try finding a location as close to the root of the drive as possible, and make sure you have full R/W access. Or try with a pendrive for example.
Since you made a backup of your ROM I think you are quite safe with using the recovery I uploaded - first post -> UPDATE 1.
They seem to fit all 2107A devices. If not I will tell you how to restore the original recovery from your backup.
You can also read UPDATE 3 I just made - your choice.

Thanx
Hello csns,
Thanx to your help, I have also got CWM recovery working on my device.
BTW I saw these two posts on a forum in Russian (I guess)...I used google translate and am pretty sure these two posts that I provide links for below have two modified ROMs with everything working, including phone and radio !!! The only draw back is that once you flash these ROMs you'll get Russian language, which can be changed to English from the language menu
I plan to fo it myself as well tomorrow,would let you know the outcome
http://4pda.ru/forum/index.php?showtopic=286687&st=920 (go down to the post labelled "A2107_Foxtrot_v100")
and
http://4pda.ru/forum/index.php?showtopic=286687&st=440 (go down to the post labelled "Прошивка Tasemart
MOD 1.1")
and of course you can also try the "Angeleas_Final" modified ROM also that I'll upload and provide links to tomorrow
Thanx again for all your help !!!

I also had many trouble getting the cwm bat file to work. It is very picky about its path and arguments on Win7.
I moved the michfood folder to C: and moved my own recovery.img to C:\michfood\recovery.old
cd C:\michfood
cwmr\ 6015.bat recovery.old
That worked - otherwise it wouldnt finish the cpio stuff.
Reworking that horrible script to work on linux would have probably taken less time -_-
Anyway - thanks!

Permissions problems on Windows7
Hi,
I Had the same problem.
makbro said:
Hi csns,
Sorry to bother you but when I try drag and drop my original "recovery.img" to "cwmr 6015.bat" in the "michfood" folder, I get a warning message "System cannot find the specified file "C:\users\....\recovery.img" "recovery" and the bat script exits...I have tried the following:-
1. Copy the folder and file "michfood" and my original "recovery.img" file in all possible alternate locations of my PC including desktop as shown in the pdf tutorial in "michfood" folder.
2. The permissions for both folders is "Full Control" for all users.
Click to expand...
Click to collapse
My solution:
It was required to use a directory not to deep in folder structures, so the best is as short as possible like "C:\michfood".
I had to add "Full Control" permissions for "everyone" to the "michfood"-directory and enable the "replicate permissions to subfolders"-option (I don't know the exact designation because I use it in german ... )
I had to delete an existing "Recovery" folder inside the "michfood"-directory from earlier attempts to create the new file and for this I had to take over the ownership of the "Recovery" folder before I was able to delete it.
The original Recovery.img must be in a different folder than "michfood". This can be on the desktop but for a shorter path it could be in the root directory.
I had success after copying "cwmr 6015.bat" to "go.bat" (it's shorter and does not contain any space in it) and calling it from command line from its directory( C:\>cd C:\michfood ) with: "go C:\Recovery.img" ( I had Recovery.img on C:\ ).
makbro said:
3. Files not hdden or protected.
4. Also turned off my antivirus and firewall.
No luck....Please help !!! Thanx in advance
Click to expand...
Click to collapse
I hope this helps ...

Thanx
Thanx for the suggestions everyone, appreciate it...I got it working in the mean time on a WinXP desktop without any problem

makbro said:
Thanx for the suggestions everyone, appreciate it...I got it working in the mean time on a WinXP desktop without any problem
Click to expand...
Click to collapse
HOW?
Tell me what you did...

Cristian.Ene said:
HOW?
Tell me what you did...
Click to expand...
Click to collapse
I copied the folder as "C:\michfoods" and recovery image file as "C:\recovery.img" and gave the command "cwmr6015 C:\recovery.img"...Before that, I removed the space from the file name "cwmr 6015.bat" and saved it as "cwmr6015.bat".

Hi, i rooted succesfuly my a2107a device and installed backup Gscript ...loading "back_mt6575_a4_v2c.sh and saving it , but when it comes to run...nothing...only the counter saying how many sec's till stop.Any ideeas why?

[Q] Re: THE ULTIMATE NEWB GUIDE. I'm too noob for to noob guide, help.

. I don't even want a custom ROM. I just want to be rooted and run stock with rooted google play store apps. Am I there?
I just want to run rooted apps with no ROM flashing...oh god why...where is the guide to root and only root?
You'd think this http://forum.xda-developers.com/show....php?t=1652398 would be where to go to do that, but evidently it's sending me down the road to custom ROM flashing. AGHGHGhjkdashbdas. Do not want.
Ok, so here's where I am, I have finished step 8:
1. Download Odin 1.85 .
2. Download(USE FIREFOX!) ClockworkMod TOUCH 5.5.0.4 OR TWRP 2.2.2.0, they are both named "recovery.tar.md5" and will be downloaded as "recovery.tar.md5", DO NOT CHANGE the filename or else it wont install.
3. Extract the contents of odin-185.zip to a folder.
4. Run Odin 1.85.exe from the folder you extracted it to.
5. Prepare Odin: Check "auto-reboot" and UNCHECK ALL OTHER OPTIONS. SEE COMPUTER SREEN PICS BELOW.
6. Only Click "PDA" and select the recovery.tar.md5 file you downloaded. SEE COMPUTER SREEN PICS BELOW.
7. How To Put your device into Download Mode: DO NOT TOUCH THE POWER BUTTON FOR THIS PROCEDURE. - download mode is NOT the same as recovery mode
a. Connect the USB cable to your PC, but NOT to your phone.
b. Remove the battery.
c. Reinsert the battery.
d. ATT PHONES - Press and keep down both Volume Up and Volume Down keys simultaneously.
ROGERS PHONES - Press and keep down only the Volume Down key.
DO NOT RELEASE THE VOLUME KEY(S) UNTIL INSTRUCTED TO DO SO IN STEP (f)
e. Insert the USB cable into your device. The phone will turn itself on when usb cable is inserted - DO NOT TOUCH THE POWER BUTTON.
f. You will now see a screen w/a yellow triangle warning you about installing a rom . Now release the volume key(s) - SEE PHONE PICS BELOW
g. Press and release the "Volume Up" key to enter into download mode - SEE PHONE PICS BELOW
h. You should now be at the Download Mode screen w/odin recognizing your phone. SEE COMPUTER SREEN PICS BELOW.
8. Click Start in Odin. It will flash the new recovery and will reboot the phone when completed. Your device will autoreboot into android. You are done using ODIN.
9. UPDATING CWM OR TWRP:
Now you need to udate CWM, download and copy cwm6027touch_v14.4.6_skyrocket.zip file to your sdcard, boot into recovery and choose "INSTALL FROM SDCARD" from recovery, install the file and reboot back into recovery to see if it installed correctly.
sk8erwitskil's CWM thread is here HERE , check to see if above file is the latest or dl the "Flashable zip" CWM file from there.
If upgrading TWRP go here HERE and follow the dev's instructions on using goo app, or you can use the flashable TWRP 2.4.1.0 file HERE and copy that file to your sdcard, boot into recovery and pick "INSTALL" from recovery, install the file and reboot back into recovery to see if it installed correctly.
How to enter recovery read section #2 below.
How to use cwm read THIS, also read Q&A on recoveries
You can upgrade to either CWM OR TWRP from which ever recovery TAR file you used in ODIN in step #2 from above.
10. You're done newbie and soon to be a power user, read and educate yourself as much as you can before flashing, happy flashing.
Click to expand...
Click to collapse
I don't know how to do step 9. Do I even need it? I have no desire to run a custom ROM.

yargdpirate said:
OK so here's the list of instructions I'm using to root my Skyrocket:
I have completed everything through step 4. I completely do not understand what to do after that. So, like I'm a 40 year old soccer mom, can you explain what I'm supposed to do to fulfill step 5? Is it through the odin app on my pc? Is this completed on my phone? The link provided that ostensibly explains to noobs how to do this (http://forum.xda-developers.com/showthread.php?t=1777970) doesn't adequately explain to me what I'm doing and where.
Help, please!
Click to expand...
Click to collapse
Assuming that you have successfully installed your custom recovery you then need to know which recovery you installed before you update it. If you used CWM you can get the updated version from the Skyrocket development thread. Put the updated CWM file on your SD card and flash that zip while in recovery. If you used TWRP you can update it through the app that it installed if it did install one. GooManager (someone correct me if I am wrong on the name) I think GooManager needs suoeruser privileges. So which recovery did you flash?

CodeNameRedNeck said:
Assuming that you have successfully installed your custom recovery you then need to know which recovery you installed before you update it. If you used CWM you can get the updated version from the Skyrocket development thread. Put the updated CWM file on your SD card and flash that zip while in recovery. If you used TWRP you can update it through the app that it installed if it did install one. GooManager (someone correct me if I am wrong on the name) I think GooManager needs suoeruser privileges. So which recovery did you flash?
Click to expand...
Click to collapse
Put the updated CWM file on your SD card and flash that zip while in recovery?
Click to expand...
Click to collapse
It's CWM. How do I
A. Put the updated CWM file on my SD card and
B. Flash that zip while in recovery? Is that through Odin, or what?
Thanks

yargdpirate said:
It's CWM. How do I
A. Put the updated CWM file on my SD card and
B. Flash that zip while in recovery? Is that through Odin, or what?
Thanks
Click to expand...
Click to collapse
i think you should stay on stock, read more b4 you brick your phone, no sense in rooting/installing custom roms when you dont know how to install a file on your scard, im not putting you down but trying to give you friendly advice

Vincom has a point. I taught myself through these forums and Google how to do it back in October of 2011. I flashed many a ROM and many files since then until I bricked mine Thursday. Now I have to pay 60 dollars to get it fixed. But on the upside I now have a Note II to play with.
Edit: She is asking for help though and she did ask in the right thread. Some people need more help than others.

vincom said:
i think you should stay on stock, read more b4 you brick your phone, no sense in rooting/installing custom roms when you dont know how to install a file on your scard, im not putting you down but trying to give you friendly advice
Click to expand...
Click to collapse
Oh. ****. I don't even want a custom ROM. I just want to be rooted and run stock with rooted google play store apps. Am I there?
I just want to run rooted apps with no ROM flashing...oh god why...where is the guide to root and only root?
You'd think this http://forum.xda-developers.com/showthread.php?t=1652398 would be where to go to do that, but evidently it's sending me down the road to custom ROM flashing. AGHGHGhjkdashbdas. Do not want.
Ok, so here's where I am, I have finished step 8:
1. Download Odin 1.85 .
2. Download(USE FIREFOX!) ClockworkMod TOUCH 5.5.0.4 OR TWRP 2.2.2.0, they are both named "recovery.tar.md5" and will be downloaded as "recovery.tar.md5", DO NOT CHANGE the filename or else it wont install.
3. Extract the contents of odin-185.zip to a folder.
4. Run Odin 1.85.exe from the folder you extracted it to.
5. Prepare Odin: Check "auto-reboot" and UNCHECK ALL OTHER OPTIONS. SEE COMPUTER SREEN PICS BELOW.
6. Only Click "PDA" and select the recovery.tar.md5 file you downloaded. SEE COMPUTER SREEN PICS BELOW.
7. How To Put your device into Download Mode: DO NOT TOUCH THE POWER BUTTON FOR THIS PROCEDURE. - download mode is NOT the same as recovery mode
a. Connect the USB cable to your PC, but NOT to your phone.
b. Remove the battery.
c. Reinsert the battery.
d. ATT PHONES - Press and keep down both Volume Up and Volume Down keys simultaneously.
ROGERS PHONES - Press and keep down only the Volume Down key.
DO NOT RELEASE THE VOLUME KEY(S) UNTIL INSTRUCTED TO DO SO IN STEP (f)
e. Insert the USB cable into your device. The phone will turn itself on when usb cable is inserted - DO NOT TOUCH THE POWER BUTTON.
f. You will now see a screen w/a yellow triangle warning you about installing a rom . Now release the volume key(s) - SEE PHONE PICS BELOW
g. Press and release the "Volume Up" key to enter into download mode - SEE PHONE PICS BELOW
h. You should now be at the Download Mode screen w/odin recognizing your phone. SEE COMPUTER SREEN PICS BELOW.
8. Click Start in Odin. It will flash the new recovery and will reboot the phone when completed. Your device will autoreboot into android. You are done using ODIN.
9. UPDATING CWM OR TWRP:
Now you need to udate CWM, download and copy cwm6027touch_v14.4.6_skyrocket.zip file to your sdcard, boot into recovery and choose "INSTALL FROM SDCARD" from recovery, install the file and reboot back into recovery to see if it installed correctly.
sk8erwitskil's CWM thread is here HERE , check to see if above file is the latest or dl the "Flashable zip" CWM file from there.
If upgrading TWRP go here HERE and follow the dev's instructions on using goo app, or you can use the flashable TWRP 2.4.1.0 file HERE and copy that file to your sdcard, boot into recovery and pick "INSTALL" from recovery, install the file and reboot back into recovery to see if it installed correctly.
How to enter recovery read section #2 below.
How to use cwm read THIS, also read Q&A on recoveries
You can upgrade to either CWM OR TWRP from which ever recovery TAR file you used in ODIN in step #2 from above.
10. You're done newbie and soon to be a power user, read and educate yourself as much as you can before flashing, happy flashing.
Click to expand...
Click to collapse
I don't know how to do step 9. Do I even need it? I have no desire to run a custom ROM.

For just rooting u have to run the superuser zip through your recovery
Oh and if you are not understanding what the stickies are saying to do then look it up on youtube because there are a lot of step by step instructions there.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

a. put updated file in your micro sd card.... plug ur micro sd card to pc... drag file and drop it in your micro sd card. put the micro sd card back in phone.
b. to go to recovery press power button + vol+ + vol- all at once and hold.
why do u need to unlock play store app? playstore is accessible completely even without root. you can also sideload Amazon appstore and other apps without root. no need to get all bricked up just to run playstore. i'm confused what are you trying to do again?

droidbabyxda said:
a. put updated file in your micro sd card.... plug ur micro sd card to pc... drag file and drop it in your micro sd card. put the micro sd card back in phone.
b. to go to recovery press power button + vol+ + vol- all at once and hold.
why do u need to unlock play store app? playstore is accessible completely even without root. you can also sideload Amazon appstore and other apps without root. no need to get all bricked up just to run playstore. i'm confused what are you trying to do again?
Click to expand...
Click to collapse
im guessing he wants to run apps from play that require root, eg titanuim backup, but he doesnt know how to put a file on his sdcard, but then he has to learn how to install zips from recovery which someones got to teach him since he doesnt want to read/learn/search for the answers. he seems to be impatient and wants it done "now", its a brick waiting to happen, my advice to him was to slowdown and learn

vincom said:
im guessing he wants to run apps from play that require root, eg titanuim backup, but he doesnt know how to put a file on his sdcard, but then he has to learn how to install zips from recovery which someones got to teach him since he doesnt want to read/learn/search for the answers. he seems to be impatient and wants it done "now", its a brick waiting to happen, my advice to him was to slowdown and learn
Click to expand...
Click to collapse
agree and such bad attituted too. i wouldn't want to help anybody who cusses in every conversation geez little respect goes a long way

It you just want to root and not want to flash any custom ROMs or anything related to it,I will tell you how to from total beginning
ALL DATA WILL BE LOST , BACKUP EVERYTHING
In order to root Android 4.2 the following three requirements must be satisfied beforehand:
The Android SDK, which you can download from Google Developers
A custom recovery like ClockworkMod (CWM) or Team Win Recovery Project (TWRP)
SuperSU, which you can download from CF-Root
There are no major differences between the two, but TWRP is more touch-oriented thanks to larger buttons. CWM is also available in a touch-compatible variant, but it has much smaller buttons. It's a matter of personal preference between the two though, but you have to choose one.
Before starting the process I urge you to perform a backup, as all data might be lost afterwards. You can copy the contents of the SD card to a safe external location such as cloud storage service or computer hard drive.
The first step that needs to be performed after all the files are downloaded is to install the Android SDK. Afterwards open the Android SDK Manager and select the following two items:
Android SDK Platform-tools -- it contains the required programs to install Android 4.2 Jelly Bean
Google USB Driver -- it contains the necessary drivers for the Nexus device
Then you should create a folder in an easily accessible location within the command line. In this example I will use a folder named "Root" in my C:\ drive in Windows. The path name will therefore be: "C:\Root".
From the folder where Android SDK Platform-tools is installed (in my case it is "C:\Program Files x86)\Android\android-sdk\platform-tools" copy the following files to the previously created "Root" folder:
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
fastboot.exe
The following files must also be copied to the "Root" folder:
CWM-SuperSU-v0.97.zip -- SuperSU file
The custom recovery that you previously downloaded for your specific device (please see below)
For my 8 GB nexus 7 wifi(codename "grouper" I will use TWRP with the name "openrecovery-twrp-2.3.1.0-grouper.img".
You can easily find the codename for your devoice by looking into Google
The custom recovery file differs for each device, please make sure you download the correct file
In order to make the process smoother for instance the SuperSU file can be renamed to "root.zip" and the custom recovery to "customrecovery.zip". It's a matter of convenience, but for accuracy I will stick to the original naming for this guide.
If the previous steps are completed you must have the following six files in your "Root" folder:
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
fastboot.exe
CWM-SuperSU-v0.97.zip -- SuperSU file
The custom recovery. In my case it is "openrecovery-twrp-2.3.1.0-grouper.img"
From there, you can proceed to install the drivers for "fastboot mode". To install them, follow these steps:
Power off your Nexus device.
Press and hold Volume Up and Volume Down then press and hold the Power button; the device will now enter "fastboot mode".
Go to Device Manager (Computer -> Properties -> Device Manager in Windows 7/8) and identify the device; for me it shows up as Android 1.0.
Right click Android 1.0 and select "Update Driver Software," then select "Browse my computer for driver software".
Select "Let me pick from a list of device drivers on my computer," then click "Next".
From "Have Disk..." option go to the folder where you have Google USB Driver installed (for me it's "C:\Program Files .(x86)\Android\android-sdk\extras\google\usb_driver" and select "android_winusb.inf".
Out of the three options select "Android ADB Interface" and validate any future warning window to install the driver.
Final preparations
Everything is prepared in order to start the installation process, but in order to do so a command window must be opened. Windows Key + R opens "Run"; type in "cmd" and the command window appears. Typing "cd C:\Root" and pressing Enter sets the "Root" folder as the working directory. Pressing the Shift key and right clicking inside the "Root" folder will also deliver the same result.
The device must be turned on in "fastboot mode" which I have explained at step no.2 during the driver installation process, and obviously plugged-in to the computer. You then have to type in the following commands while in "fastboot mode":
fastboot devices -- this is just for verification purposes; if there is no listed device then the drivers have been improperly installed and steps 1 through 7 must be redone.
fastboot oem unlock -> you have to accept the prompt in order to continue -- this command will unlock the bootloader, but it will also erase the data on the device which is why a backup is necessary.
fastboot reboot-bootloader -- this will reboot the bootloader.
fastboot flash recovery openrecovery-twrp-2.3.1.0-grouper.img -- this will flash the custom recovery --please use the specific file and name for your particular Nexus device!
fastboot erase cache -- this will erase the cache -- might not be necessary but it's just as a precaution.
fastboot reboot -- this will reboot the device.
After Android 4.2 is loaded and running the SuperSU file must be copied from the "Root" folder to the internal storage (shows up in Windows Explorer as a Nexus device). A simple copy and paste will do the trick here.
Then you have to power off the Nexus device and enter "fastboot mode" again. Use the Volume Up and Volume Down keys to navigate until you can select "Recovery Mode". After the power button is pressed the device will reboot in the new custom recovery.
Rooting your Nexus device
If you have ClockworkMod installed, you have to perform the following steps:
Select "install zip from sdcard"
Select "choose zip from sdcard"
Select "0" (zero) folder
Select "CWM-SuperSU-v0.97.zip"
Select "Yes - Install CWM-SuperSU-v0.97.zip"
Select "Go Back"
Select "reboot system now"
If you have Team Win Recovery Project installed, you have to perform the following steps:
Press "Install".\
Select "CWM-SuperSU-v0.97.zip" -- for me it's in the "0" (zero) folder
Swipe to confirm flash
Press "Wipe cache/dalvik" (just as a precaution)
Swipe to wipe
Press "Reboot System"
After Android 4.2 loads your device can run apps with elevated privileges (meaning it's rooted). A SuperSU app is installed in order to allow root requests, so please use your judgement on which apps you grant access.
If you experiences any problem, please reply and I will look into it.
Sent from my Nexus 7 using xda app-developers app
Sent from my Nexus 7 using xda app-developers app

^^you want him todo that, lmao, he doesnt even know how to put a file on his sdcard to flash it in recovery, theres no way a computer newb is going to be able to follow what you posted

That's why I have not used the word flash anywhere, I know that he does not know how to flash , I have posted the right thing for a total noob,( at least if he knows how to use command in windows or install drivers)
I helped him in the way I could and what he requested
Sent from my Nexus 7 using xda app-developers app

You think that helped. LOL. Your telling him to do things that aren't even required to gain root with this device. Not everything is a nexus bro. Next time you wanna help study up on the phone your giving advice about. lol

Well , thanks for telling me that every android isn't rooted in same manner, I was thinking that all devices are rooted in same ways like for my nexus
Sent from my Nexus 7 using xda app-developers app

naman14, im not putting you down, your step by step howto is admirable, good work, but the problem is that the op is clueless on tech stuff, its not the word "flash" he has a problem with, i could of said "install" and it would lead to same conclusion, he doesnt know how to copy a file to his sdcard, if he cant do that he has no business in modding his phone until he learns more. anyhow the op is long gone by now

I upgraded my samsung skyrocket s2 version 2.3.6 to 4.0.4 through the Kies. Then I tried to install TWRP 2.2.0 and Odin 1.85. I saw COM 14 ; COM 17 when I hit start button .It said
FAILED. Now it showed a yellow triangle in the middle of phone & monitor pictures. ( including : Firmware upgrade encountered an issue . please select recovery mode in Kies & try again). Please help . Thank you very much.
I just tried other laptop . I saw COM 3 but it said it couldn't open the serial (COM )port . All thread completed (success 0/ failed 1)

BLU Quattro 4.5 rom list and how to instructions

Found this online. *****this is not my work****** All credit goes to the author quattrodevelopment.blogspot.com
Here is a step by step with roms included for the 4.5 quattro Not the HD or 5.7 HD maybe soon.
Disclaimer: These ROMs/Recoveries are only intended for the BLU Quattro 4.5, or the K-Touch v9(which is the chinese version) These WILL NOT work on the 4.5HD or 5.7HD devices(I will release ROMs/Recoveries specifically for your device at a later time)
Drivers: https://copy.com/BUMmsS9rhLJe
English Recovery: https://copy.com/XZxTDht2lQiz
Gapps(4.2) https://copy.com/utkbZgwRpsVB
Gapps(4.1) https://copy.com/pSd8SsqU9pdI
ROMs With Less Bugs: MIUI v5 (4.1) https://copy.com/sbmcN6PHwFfi CM/AOKP Hybrid? JB (4.1) https://copy.com/VeLz1VLbkNNI Shendu ROM 4.1(Modified/Tweaked by me) https://copy.com/NwiFnlO8JAek
ROMs With More Bugs: Cyanogenmod 10.1 (4.2) https://copy.com/8kt2EAU2ll8y
1- Download the drivers from link posted above, and extract it to the folder of your desire. Now turn the phone off, and hold Vol+ (volume up button) and Power button at the same time until you see a green screen, then release both buttons immediately. You should now be in APX mode(nvflash) it will be a black screen
2- Connect phone to computer via usb cable. Now you should get a pop-up window about installing drivers, you're going to want to choose to browse computer for driver software manually. Then choose let me pick from a list of device drivers on my computer, and click have disk. Now you're going to browse to the location where you extracted the drivers to, and click on it(Ignore warning if it pops up, and choose install)
3- Assuming everything went as planned, now download the recovery and extract it to the location you desire(must be in a directory that you can issue adb commands from) inside of that folder, locate a file named recovery.bat. Double click on that file and a command prompt with a bunch of chinese pops up. Give it a second and press enter, it will go through the process and flash a recovery onto your phone
4- After everything is done, hold down the power button for about ten seconds(until the device powers off) Power the device back on normally, and download the ROM/ROMs if you haven't already and place them on the internal or external sd card(your choice) With device connected to pc, open command prompt and type in "adb reboot recovery" (without quotes) and the device will boot into recovery mode
5- Now that we have an English recovery, the translations below aren't really needed. However, I'm going to leave them up for a few days, just until everybody can transition to the English recovery. They will be deleted after that!
Recovery Main Menu: -Reboot -Install from SD card -Wipe Data/Factory Reset -Wipe Cache -Backup&Restore -Mount/Format -Advanced
Install From SD Card Menu: -Install zip from external SD -Apply update.zip -Unknown* -Install zip from internal SD
Backup&Restore Menu: -Backup -Restore -The rest are unknown*
Advanced Menu: -Reboot Recovery -Wipe Dalvik Cache -The rest are unknown*
To install ROM- In recovery mode, Factory Reset/Wipe Cache/Wipe Dalvik Cache. Then choose install zip from sd card(then choose internal or external and locate the ROM you want to install) After that you need to do the same thing to install the gapps package(you need the gapps package for google apps to function) once all is done, reboot and wait(it takes a while to boot the first time after flashing new ROMs, it has to rebuild the Dalvik cache)
NOTE: In case you aren't familiar with flashing ROMs, once you click on something( "backup" for example) a menu pops up pretty much asing you if you're sure you want to do that. It will have a bunch of lines of the same thing(which is no) and then one of the lines will have a bunch of writing beside it(which means yes). Also BEFORE you flash any ROMs, make sure you factory reset/wipe cache/and wipe dalvik cache, then you can flash the ROM and gapps package
*These will be updated regularly, as I discover what they are **More ROMs to come!

Internal Memory
The "BLU Quattro 4.5" has 4GB internal memory partitioned into 0.98GB for ROM and apps and an internal usb-memory of 1.63GB.
Is it possible to merge or resize the partitions?
I have 16GB external SD so the 1.63GB internal reserved usb-memory is useless and I still having trouble out of space in primary partition.
Thanks and sorry my english =/

TechSoft said:
Found this online. *****this is not my work****** All credit goes to the author quattrodevelopment.blogspot.com
Here is a step by step with roms included for the 4.5 quattro Not the HD or 5.7 HD maybe soon.
Disclaimer: These ROMs/Recoveries are only intended for the BLU Quattro 4.5, or the K-Touch v9(which is the chinese version) These WILL NOT work on the 4.5HD or 5.7HD devices(I will release ROMs/Recoveries specifically for your device at a later time)
Drivers: https://copy.com/BUMmsS9rhLJe
English Recovery: https://copy.com/XZxTDht2lQiz
Gapps(4.2) https://copy.com/utkbZgwRpsVB
Gapps(4.1) https://copy.com/pSd8SsqU9pdI
ROMs With Less Bugs: MIUI v5 (4.1) https://copy.com/sbmcN6PHwFfi CM/AOKP Hybrid? JB (4.1) https://copy.com/VeLz1VLbkNNI Shendu ROM 4.1(Modified/Tweaked by me) https://copy.com/NwiFnlO8JAek
ROMs With More Bugs: Cyanogenmod 10.1 (4.2) https://copy.com/8kt2EAU2ll8y
1- Download the drivers from link posted above, and extract it to the folder of your desire. Now turn the phone off, and hold Vol+ (volume up button) and Power button at the same time until you see a green screen, then release both buttons immediately. You should now be in APX mode(nvflash) it will be a black screen
2- Connect phone to computer via usb cable. Now you should get a pop-up window about installing drivers, you're going to want to choose to browse computer for driver software manually. Then choose let me pick from a list of device drivers on my computer, and click have disk. Now you're going to browse to the location where you extracted the drivers to, and click on it(Ignore warning if it pops up, and choose install)
3- Assuming everything went as planned, now download the recovery and extract it to the location you desire(must be in a directory that you can issue adb commands from) inside of that folder, locate a file named recovery.bat. Double click on that file and a command prompt with a bunch of chinese pops up. Give it a second and press enter, it will go through the process and flash a recovery onto your phone
4- After everything is done, hold down the power button for about ten seconds(until the device powers off) Power the device back on normally, and download the ROM/ROMs if you haven't already and place them on the internal or external sd card(your choice) With device connected to pc, open command prompt and type in "adb reboot recovery" (without quotes) and the device will boot into recovery mode
5- Now that we have an English recovery, the translations below aren't really needed. However, I'm going to leave them up for a few days, just until everybody can transition to the English recovery. They will be deleted after that!
Recovery Main Menu: -Reboot -Install from SD card -Wipe Data/Factory Reset -Wipe Cache -Backup&Restore -Mount/Format -Advanced
Install From SD Card Menu: -Install zip from external SD -Apply update.zip -Unknown* -Install zip from internal SD
Backup&Restore Menu: -Backup -Restore -The rest are unknown*
Advanced Menu: -Reboot Recovery -Wipe Dalvik Cache -The rest are unknown*
To install ROM- In recovery mode, Factory Reset/Wipe Cache/Wipe Dalvik Cache. Then choose install zip from sd card(then choose internal or external and locate the ROM you want to install) After that you need to do the same thing to install the gapps package(you need the gapps package for google apps to function) once all is done, reboot and wait(it takes a while to boot the first time after flashing new ROMs, it has to rebuild the Dalvik cache)
NOTE: In case you aren't familiar with flashing ROMs, once you click on something( "backup" for example) a menu pops up pretty much asing you if you're sure you want to do that. It will have a bunch of lines of the same thing(which is no) and then one of the lines will have a bunch of writing beside it(which means yes). Also BEFORE you flash any ROMs, make sure you factory reset/wipe cache/and wipe dalvik cache, then you can flash the ROM and gapps package
*These will be updated regularly, as I discover what they are **More ROMs to come!
Click to expand...
Click to collapse
Please rename this For Others Such as [GUIDE]BLU Quattro HowtoRoot/Rom list. Thanks for the awesome Guide!

alanfrank said:
The "BLU Quattro 4.5" has 4GB internal memory partitioned into 0.98GB for ROM and apps and an internal usb-memory of 1.63GB.
Is it possible to merge or resize the partitions?
I have 16GB external SD so the 1.63GB internal reserved usb-memory is useless and I still having trouble out of space in primary partition.
Thanks and sorry my english =/
Click to expand...
Click to collapse
I've found this: http://forum.xda-developers.com/showthread.php?t=1171531
Any idea if this can be used with another phone them the LG one he have used in the guide?
I cant post in the thread because Im new user here =/

problem
I have done everithing you said, and my cell freezes on boot forever, now what????

BLU Quattro 4.5 HD & 5.7
Need to know how to restore both devices to stock. Any aplication ODIN like to restore it back to stock from the download mode?

Please help me root, i try binary method but i just get boot loop.

Recovery + Root My experience
Hello... I got my BLU Quattro 4.5 (D440) a while back, didn't fuzz with it much right off. The Stock ROM was sluggish at best thought there was even an issue with the Digitizer/screen. But this thread was extremely helpful. I am now running Shendu ROM 4.1.2 one of the suggested ROM's above. I tried the other 2 first and they were mostly in Chineese and I had an especially hard time getting them switched over to English. Either way onward to the point. I have put together a few helpful tips-tricks for my experience with this phone and its phoenix transition to an awesome handset. Thats right now this is my daily driver and I love it! See below hope its helpful.
BLU Quattro 4.5 (440D) GSM Recovery+Root
These steps for this phone only!! Not responsible for any issues.
1. download ROM's, Recovery, & Driver from XDA (this thread)
http://forum.xda-developers.com/showthread.php?t=2327417
2. Enable USB Debugging! Go into Apps-Settings-DevOptions - Check box for USB Debug
3. Have original USB cord if handy! I tried with a Samsung OEM cable but no luck getting drivers to stick. Use original is best. (If you have one.)
Plug in USB Cord to PC then Phone and see if windows detects drivers. let it. It wont get the ones u need later, but what it does find is for USB storage. (you can move over your ROM's/Gapps to storage, downloads folder is a good spot).
4. Go to... http://junefabrics.com/android/downloadold.php to get pdanet software. Install it and it will give i the right drivers for ADB support. I used 4.01 to match the android version currently on my phone.
5. Extract the Driver provided from XDA. Put it in a folder with the ADB commands. Or you can get it all here... http://downloadandroidrom.com/file/GalaxyNexus/rooting/GalaxyNexusRootNew.zipn <-- I know this isn't for BLU but, if you extract this to a folder, and also add the drivers extracted to it as well this works! I've done it.
6. Extract the English Recovery to the same folder.
7. Turn off your phone. Hold down Vol up and Power button for about 5-9 seconds. Once you see a green screen let go of both. Screen may flicker then go black but the icons at the bottom will stay lit. You are now in APX mode (nvflash) mode. (as stated above in original post)
8. Check your Win 7 PC device manager. For a Phone device with ADB. If you you may need to update driver with the one that came from XDA, but the PDANet software should make it work.
8. Go to the folder and find Recovery.bat file (may have Chinese in file name. Double click and a command prompt window will pop up with a bunch of unknown characters, wait 5 sec then hit enter. The batch file should take of pushing the necessary recovery through ADB to the phone. It will error if it can't.
9. If completes OK. Push power for 7-9 seconds to power off the phone. Hit power like normal to turn it back on. It will boot up like normal (or it should).
10. USB is still connected this whole time and you can open a command prompt window. Navigate to the folder you placed the Recovery into. Something like user/username/desktop/BLU/recovery..etc)
Type ADB devices....it should show you that is is connected to your device. Then type " adb reboot recovery " and the device should reboot, give it some time.
11. Once in recovery. Best to do a backup of the original ROM & system. that way you can get back into recovery if anything goes wrong and wipe out the problem by restoring and starting again.
After you backup === you can get into recovery without the command being typed in or even being connected to your PC.... By holding Vol up + Power till you see the green screen then let go of power but keep holding Vol up till you see the BLU Products boot screen then let go ===
Clockworkmod Recovery should be on your screen.
you can reboot phone now and get back to original with no changes. Or you can venture into the world of loading ROM's (There in your downloads folder if you saved them in Step 3)
ROM 101
BACKUP-BACKUP-BACKUP 1st thing once in Recovery ...can't stress enough how much of trouble you can keep yourself out of by keeping an original backup.
As I stated before the Shendu ROM + Gapps is running smooth and all features I've been trying are working flawlessly!! Thanks to original post for getting me going. Just thought I'd add my 2 Cents.

Ok, here are the BEST 2 ROMS for this Phone:
Android 4.0.4(close to vanilla) : MEGA
Cyanogenmod 10.2 (Android 4.3.1) : (some audio and video issues, in BETA version ) MEGA
Need to merge internal partitions ? (merge memories) this one really "resize" the partitions (first one 1,7GB, another one new size is 2Mb) the flash.cfg file you need to flash:
This phone dont have notificaion led, fixed with this app: MEGA (flash the botton menu buttons)

Altomugriento said:
Ok, here are the BEST 2 ROMS for this Phone:
Android 4.0.4(close to vanilla) : MEGA
Cyanogenmod 10.2 (Android 4.3.1) : (some audio and video issues, in BETA version ) MEGA
Need to merge internal partitions ? (merge memories) this one really "resize" the partitions (first one 1,7GB, another one new size is 2Mb) the flash.cfg file you need to flash:
This phone dont have notificaion led, fixed with this app: MEGA (flash the botton menu buttons)
Click to expand...
Click to collapse
Can you explain the merge memories procedure? it will be reaaaaally needed!!
tryed from a spanish forum with no luck
thanks

dinizbruno said:
Can you explain the merge memories procedure? it will be reaaaaally needed!!
tryed from a spanish forum with no luck
thanks
Click to expand...
Click to collapse
Do you try the procedure posted in 3dgames . com . ar? ( its my work translated from the 592zn page, all the credits for the chinesse people)

Anyone tried the K-touch V9 kit kat in the BLU??
www
needrom
com/
download/
k-touch-v9-miui-v5-kk

Yes, those roms (v5) are very slow. Just use the 4.0.4 stock.
I want to try the JB stock, but i can´t find the official one anywhere.
Blu quattro 4.5 official rom to download, after you delete the bloatware and put a nice and clean theme you´ll get a nice speed.

orig D440 (quattro 4.5) rom
You can find the rom on google plus under BLU Products Development search for the model!
Hope that helps. I took your advice tonight and I am back running old school. Works ok husfar

I need phone.apk of this rom for Blu Quattro
Trozzul said:
Please rename this For Others Such as [GUIDE]BLU Quattro HowtoRoot/Rom list. Thanks for the awesome Guide!
Click to expand...
Click to collapse
I need phone.apk for blu quatro
please send me the file
[email protected]

how to get clockworkmod recovery console active ?

Hi all.
I am all new within android systems.
I am trying to upgrade a hauwei u8860 - but i am stuck getting the boot loader option when i startup the device.
I have read several guides on how to put on a new version of android and many of those uses clockworkmod, but i guess i am missing some recovery image for getting this active - i keeep on getting the pre installed recovery console with no bootloader option available.
Pleae can some one tell ,me what i am missing to get clockworkmod recovery console active ?

Download CWM recovery image from here
https://www.dropbox.com/s/jw87ma6yvqmodgx/u8860-recovery-6.0.1.0-touch.7z
visler said:
Hi all.
I am all new within android systems.
I am trying to upgrade a hauwei u8860 - but i am stuck getting the boot loader option when i startup the device.
I have read several guides on how to put on a new version of android and many of those uses clockworkmod, but i guess i am missing some recovery image for getting this active - i keeep on getting the pre installed recovery console with no bootloader option available.
Pleae can some one tell ,me what i am missing to get clockworkmod recovery console active ?
Click to expand...
Click to collapse

Thanks alot
I have now downloaded the fil, but i need some info on where to place it and if it need to be unzipped before move to the phone

visler said:
Thanks alot
I have now downloaded the fil, but i need some info on where to place it and if it need to be unzipped before move to the phone
Click to expand...
Click to collapse
Although i m not an expert.. but here the process
1) download the file ..
2) unzip it on ur pic
3) in the unzip folder u will see a recovery.img file
4) Now disocnnect the USB cable from phone (if any)
5) Shutdown the phone
6) Now press VOLUME + and Volume - and Power button together .. this will take u a PINK SCREEN
7) Now connect the phone to pc via USB cable .. in ur PC u will be able to see a new disk drive .. which will contain recovery.img file already
8) for backup up purpose rename the recovery.img in the newly mounted disk driver to recovery.org (or something else)
Now the final thing
9) Copy the recovery.img from your unzipped folder to mounted drive ..
Take out battery and u r done
Now U can enter in CWM recovery by press volume+ and power (i not sure.. chk forum)

Again tx alot, i will try it later - here on windows 8 pc everything is ok, pink screeen starts and pc detects new device and install some drivers, but no new drive is showing at the pc when the "driver install window" closes

visler said:
Again tx alot, i will try it later - here on windows 8 pc everything is ok, pink screeen starts and pc detects new device and install some drivers, but no new drive is showing at the pc when the "driver install window" closes
Click to expand...
Click to collapse
I m not sure why .. but trying removing SD Card and try .. let me know if it worked :good::good::good:

for G6-L11 LTE - modded B370 ( apps to sd card, can flash several recoverys )

29-03-2016
For Huawei Ascend G6 L11 LTE
Hi!
This is the ROM i have in my phone, it was changed by me and for now everything is working fine.
If you want default tutorial go here :
>>>DEFAULT TUTORIAL:
https://www.facebook.com/Huawei.Ascend.G6.L11.Kit.kat.B370/posts/1427876034188089.
My version still Kit kat B370 but edited by me, is a backup from my phone.
Please read all to understand and see what you need to do and how to do it.
This Version is diferent because if you have a ext4 partition in your external sd card it will install the apps there automatically!!!
Advantage of this? you will have a huge store space for the apps!!!
If not it will work like default ROM.
To create a primary ext4 partition in sd card with the size you want, you can use mini partition tool (for windows OS ).
http://www.partitionwizard.com/free-partition-manager.html
You can create the partition after flash but you CAN´T activate your Google account or install anything else, before your reboot the phone with the partition inside sd card.
Now, if you are using it default than you create the partition and reboot, the phone don´t delete the apps but will shutdown that apps creating errors...
To use it with sd card ext4 partition is better to start from factory reset with the partition already created in sd card!
This video shows how this ROM works with a external ext4 partition in sd card what means that all apps go to sd card and let internal storage free:
https://youtu.be/7st6838_aAg
It have Rashr from XDA, it is a app that easly can change/flash your recovery and some other things.
When you flash this ROM it will create in your sd card a folder called recoverys, inside you will find TWRP ( modde by me to ) and the default recovery.
How to use it? Open Rashr, give root permissions, selecte recovery, search in explorer for sdcard1, open recoverys folder choose the one you want and flash it! Is that simple.
>>>>>This Rom have:
-Rashr from XDA, its a flash tool to use in phone
-Custom bootanimation and shutdown animation
- One Hand UI ( helps to write in keyboard with one hand, you can find in shortcuts bar )
- Root
- Root tools (Root Browser, ES File Explorer, build.prop editor, etc...)
-Same cosmetic changes ( battery icon, signal reciver and wifi icons edited)
-Swap
- Governor set to performance
-Low cpu frequencie set to minimum ( 300000 )
- RAM tweaks
- Entropy tweaked ( https://en.wikipedia.org/wiki/Entropy_(computing) )
-Google Play updated
-Huawei backup app update
-Huawei File manager Update
-Only basic Google apps
-The Icons order was changed
-P8 Theme manager
- More options in Storage folder
- The sdext4 shortcut is to your external ext4 partition IF you have it in sd card, if not, is a regular folder.
And same other things...
I hope you enjoy it.
ADVISE!
Always do backup from the ROM you have in your device.
If you have root you can use this tool, it have a backup option.
G6Sknife for windows OS
https://mega.nz/#!WgoVWLjQ
Key:
!YV1JLOGvXX4rvYreDXP1Twwh-V5O65NjmMxBH_7unUI
My device is working properly without any problem so far, some times bugs only be noticed with use and i will update this post with the ROM fixed.
Install it by your own free will, I am not responsible for any damage that may appear in the device.
This is a European ROM but, like the default one, there are same country restrictions in providers that may affect the 4G reception, etc, etc.
If you want to install, you can try to unlock these restrictions since the ROM has root.
>>>>> FIX CUST, CHANGE PROVIDER AFTER INSTALL THE ROM<<<<
This ROM was edited to vodafone pt but can be changed to your provider.
When you flash it, if you are not from Portuguese Vodafone it will show a bootanimation that say " Change Cust after settings than do a factory reset ".
This is how to fix it with Root Browser, that you can find in ROM, go to folder /DATA and seek the custom.bin file, open it as a text file, you will see something such as example zt/rt, now we left the folder /DATA and go to the folder /CUST , we open it and we will find a folder with the name vodafone, we will change the name of it to the first name that we saw in custom.bin in our example will is zt, use small font, now we entered the zt folder and we will find another folder that his name is pt, let's switch to the second name of our exemple which will be rt, use small font!
Go back and exit the app, do a factory reset. Done!
.
.
>>>HOW TO INSTALL ROM.
Do backup from your data/apps with the default backup app from the phone to restore after install it.
->You need bootloader unlocked, search in this page to how to do it ( http://forum.xda-developers.com/ascend-g6/general/huawei-ascend-g4-4g-l-11-instant-t3190617/page2 ) , and need TWRP recovery FROM THIS POST, to install TWRP boot in bootloader ( fastboot - turn off the phone, press vol - and power, release power on boot than vol when you see the fastboot screen, must say in red unlocked) and execute this file to install TWRP recovery:
TWRP2d.exe
https://mega.nz/#!T9pygRAC
KEY:
!qVujE5A7RrQeQ1dqFFuRGYtUvBLWo-PfrEAGr6QoGsI
To install ROM, copy the zip file bellow ( ROM ) to sd card, turn off the phone, press vol + and power at same time, release the power on boot than vol + when you see the blue screen from TWRP, go to install and search for the zip, than swipe to install! Done. The ROM will install the default recovery again, if you want to stay with TWRP you must flash it again.
----->Before ROM flash, IF YOU WANT to win 2205MB more for apps and user data flash this zip file with TWRP like it was a ROM, you can read the steps in the end of flash, but i will write bellow. For you understand when you see "Insufficient storage available" is not the storage where music or pictures go, that is like a sdcard, is data partition storage. What this zip do? This will take from that storage where music and pictures go to give to data partition storage. Why this is good? Every one have a external sd card for pictures and music, i think and this will let to to install more apps in phone!!!
ADVISE: This do a factory reset!!
https://mega.nz/#!OgRzmDiK
KEY:
!zPrLPGzJPQOM1eTxX_L3SX1qiUyCs7ewkx-Fz77yM3U
->After zip Flash DON´T GO OUT FROM TWRP!
Go to main menu -> WIPE ->Advanced Wipe ->Select data -> go to repair or change file system -> change file system ->EXT4 Swipe to Change -> Now you can reboot.
.
-> My ROM have a swap ON ( https://en.wikipedia.org/wiki/Paging#SWAP-SPACE ).
Before flash see this video it shows a basic Flash with out changing the partitions size and with out a external ext4 partition and don´t show to how to change cust because it is already set to my provider.
It shows the flash from B118 than to Huawei_Ascend_B370_LTE_BB ROM:
https://youtu.be/duF3kWSpgsI
|
|
|
V
Now the ROM!
29-03-2016!
Huawei_Ascend_B370_LTE_BB.zip
https://mega.nz/#!ys4D3TYa
KEY:
!7PmY_vzI-i7a2P4wR6f5g15capGSZxFqIvFgri30aPA
Note:
This "MAYBE" works in same L22, L33 but not dual SIM. Only testing you can know it. The Only issue for sure that will be is the home key but can be fix it with a simple app from google play.
You can try to use this app with this ROM, for now, if you want it.
Notes:
Tap Tap App is to use light sensor to unlock the phone, open Tap Tap app, Install, go to setup sensor, select "Unlock when removing the cover", unselect "Tap Tap unlocks the screen" ( G6 don´t have this option in kernel).
Busybox, is a tool to install several Linux tools to use with Android, like cmd in Windows... if i can say like this... You can use them with terminal emulator.
GPS Status helps with GPS, it gets faster, better if data is ON.
>>>Multi-action Home Button<<<
https://play.google.com/store/apps/details?id=com.home.button.bottom
https://youtu.be/gv2bEPloL6Y

flash error ( Failed )
Hi...
How are you..??
I have flash error...
Checking device...
This package is for device: msm8226; tis device is hwG6-L11...
What i can do it..??

Bricked my device. Flashed it successfully via TWRP and after the automatic reboot, nothing came back on not even the screen