Hello xdanian's, Is there any safest newbie guide to upgade GT-i9003 DXKB2 2.2.1 in any best and fast custom firmware? Please link me up, im afraid to get destroy my unit like what ive did on my tablet WM8 mid last time. I upgrade the firmware of my tablet and after that, tablet wont open anymore.
Thank you in advance.
matthyvelarde said:
Hello xdanian's, Is there any safest newbie guide to upgade GT-i9003 DXKB2 2.2.1 in any best and fast custom firmware? Please link me up, im afraid to get destroy my unit like what ive did on my tablet WM8 mid last time. I upgrade the firmware of my tablet and after that, tablet wont open anymore.
Thank you in advance.
Click to expand...
Click to collapse
www.hotfile.com/dl/125246801/36c9b39/I9003XXKPE.rar.html download this file.(password: samfirmware.com)
www.multiupload.com/1PQLH31F3L then download this file.(password: sampro.pl)
forum.xda-developers.com/showthread.php?t=1133787
Use this link to first flash xxkpe and then xxkpq over it.
please click thanks if you helped me.... ( oops sorry if i held you )
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5
Help me, i recieve this error when i try to flash.
<ID:0/005> Can't open the serial(COM) port.
matthyvelarde said:
Help me, i recieve this error when i try to flash.
<ID:0/005> Can't open the serial(COM) port.
Click to expand...
Click to collapse
have u installed kies?
Related
Hi to all the pro here, i have some question need an answer...
1. i want to flash my original SGS I9000 (CURRENT I9000DXJPB) to custom rom , like darky . is it i have to find all 4 file for Odin3 needed ? PIT , BOOTLOADER , PDA & PHONE .. ? Seriously, i really need some guide to flashing to rom .. is there any link for complete guide ?
2. bootloader , pda & phone .. which is kernel file among this 3 ?
i know my question is very stupid..but i really need the answer...
thank you very much....
jynorip said:
Hi to all the pro here, i have some question need an answer...
1. i want to flash my original SGS I9000 (CURRENT I9000DXJPB) to custom rom , like darky . is it i have to find all 4 file for Odin3 needed ? PIT , BOOTLOADER , PDA & PHONE .. ? Seriously, i really need some guide to flashing to rom .. is there any link for complete guide ?
2. bootloader , pda & phone .. which is kernel file among this 3 ?
i know my question is very stupid..but i really need the answer...
thank you very much....
Click to expand...
Click to collapse
I suggest reading this.
If you still have questions after, please ask and be specific.
i am new in rooting phone, i read this thread http://forum.xda-developers.com/showthread.php?t=1959225 . i have same problem, but my phones baseband version is DDKp4. what i do.. plz help, plz help..
ami2free said:
i am new in rooting phone, i read this thread http://forum.xda-developers.com/showthread.php?t=1959225 . i have same problem, but my phones baseband version is DDKp4. what i do.. plz help, plz help..
Click to expand...
Click to collapse
Did you try the steps already recommended on that thread? Using odin to flash stock firmware up to DDLF2?
No i dont try anything from that thread. plz tell me which version of stock rom is for my phone & plz tell me detail steps (coz i am new). If possible give me link plz, i am very worried about my phone. plz plz plz help me
No i dont try anything from that thread. plz tell me which version of stock rom is for my phone(my phone is indian version) & plz tell me detail steps (coz i am new). If possible give me link plz, i am very worried about my phone. plz plz plz help me.
Plz mention the steps that you did before you facing this problem.
Have you tried to root your device?
Then which cf-root you used. Because there are different cf-root for different firmwares flashing a wrong one may land you in trouble. So to understand what happened for the guys to help you. You need to give more details
Sent from my GT-I9003 using xda app-developers app
hi neverbackdown
1st thanks 4 replying.
My gaaxy sl is indian version, it's baseband version DDKP4.
I connect my galaxy sl with odin v1.85, download cf-root version bagaria-09.GT-I9003_PDA.tar from http://forum.xda-developers.com/showthread.php?t=1351056 and try to flash.
Its shows PASS in the Odin, afterthat it reboot but cannot start normally, it only shows boot logo.
i tried to go recovery mood, but i can't. it only goes in download mood.. plz help me. plz.
tell me what i do in details, coz it my 1st time i tried to root my phone..
Okay. Since you are able to access download mode. So first flash xxkpe stock firmware through Odin. I guess you would be knowing how to do that, if not in this forum it has been mentioned some where in the forum how to do that.
Below I give brief details but if you want detailed ones then Plz check the forum.
Xxkpe :
First you need to partition your device using lanton pit through odi n. Once done you get blank screen remove your battery and then reinsert and then go to download mode.
Then select the corresponding files in odin
MODEM---FILE CONTAINING PHONE
CSC--FILE CONTAINING CSC
PDA--FILE CONTAINING CODE
the other left over for the other file.
Once done then install your stock ddkp4. I would suggest you ddlf2 as it is latest stock one and has some extra features.
Then flash the cf-root universal 14beta fix file through Odin PDA to root the device.
It should be fine then.
Thanks,
Sent from my GT-I9003 using xda app-developers app
thanks neverbackdown
plz give me link, i am very confused.
i download indian firmware from sammobile .com . Can i try to install it with Odin?
If you think it is alright, plz give me details steps in Odin..
ami2free said:
thanks neverbackdown
plz give me link, i am very confused.
i download indian firmware from sammobile .com . Can i try to install it with Odin?
If you think it is alright, plz give me details steps in Odin..
Click to expand...
Click to collapse
my advise.
download ddkp4,and flash with odin.
our universal cfroot is only for GB, i didnt know what version is ddkp4, but GB Is version 2.3 and above.
Sent from my Galaxy Nexus using Tapatalk 2
Thanks Nevebackdown.
I do your steps and my phone is rooted now.
Thanks bro. Thanks
Hi,
Sorry couldn't reply to your earlier post as I faced problem with my gprs connection.
Good to hear that your problem is resolved.
Sent from my GT-I9003 using xda app-developers app
it's so simple .. i failed to upgrade my Galaxy S from 2.2 to 2.3.6 using odin ! because i'm stupid .. i used a guid for another mobile version !
my version is GT-I9003 and the guide was for GT-I9000 .. and now i'm stuck !
my mobile don't respond to anything .. can't go to recovery and can't download the software again, i can't even charge the phone any more .. and the screen is all black !!!
so my question .. is there any hope, or should i just break the phone to a little pieces ???
BTW .. the guide : i cant put the guide like, soooo ......... just google this "How Do I Install Android™ 2.3.6 (XXJVU) on Galaxy S® i9000"
and i did just as the guide say .. even the odin said "PASS"
thnx anyway
omg .. no replay ?? :'(
come on guys :'(
can you get into download mode ?
if so put a stock rom on it
Nick1402 said:
can you get into download mode ?
if so put a stock rom on it
Click to expand...
Click to collapse
no i can't !!
i can't start the mobile in any way !!
i think it's gone forever
Hi,
I bought my Samsung Galaxy Note 10.1 (SHW-M485W) - KT from SOUTH KOREA
I tried to upgrade , but its soft bricked. It was struck at samsung logo.
I tried in the internet but I could not find any rom with model number shw-m485w.
Can any one help me.
Thank you.
hi guys
sirishkv said:
Hi,
I bought my Samsung Galaxy Note 10.1 (SHW-M485W) - KT from SOUTH KOREA
I tried to upgrade , but its soft bricked. It was struck at samsung logo.
I tried in the internet but I could not find any rom with model number shw-m485w.
Can any one help me.
Thank you.
Click to expand...
Click to collapse
Hi Guys, I am desperately looking for your help and guidance. I have flashed a very near model SHW-M480W , firmware. but no use.
No custom roms are working.
Your help is greatly appreciated.
sirishkv said:
Hi Guys, I am desperately looking for your help and guidance. I have flashed a very near model SHW-M480W , firmware. but no use.
No custom roms are working.
Your help is greatly appreciated.
Click to expand...
Click to collapse
Do you know the exact specs of this device. you should look these up and compare them to the other 10.1 devices. I AM not sure any rom on this forum will help ..
Good Luck...
erica_renee said:
Do you know the exact specs of this device. you should look these up and compare them to the other 10.1 devices. I AM not sure any rom on this forum will help ..
Good Luck...
Click to expand...
Click to collapse
Specs for SHW-M485W
1. WiFi only
2. 16gb internal memory
3. Build in Korea
I have found similar products. I flash those roms (SHW-480W) through oidn at the end of processing the odin giving result as Failed.
When I use the other model Rom having similar specs (GT-N8013) its failing at the beginning only saying the model number is not correct.
Any other alternatives like changing model number etc.
sirishkv said:
Specs for SHW-M485W
1. WiFi only
2. 16gb internal memory
3. Build in Korea
I have found similar products. I flash those roms (SHW-480W) through oidn at the end of processing the odin giving result as Failed.
When I use the other model Rom having similar specs (GT-N8013) its failing at the beginning only saying the model number is not correct.
Any other alternatives like changing model number etc.
Click to expand...
Click to collapse
That likely means your boot loader is stopping you from flashing a rom not meant for you device. YOU May be able to pull the boot-loader out of the rom then reflash . DO SO WITH CAUTION ... Also some have had been able to flash with mobile odin. I have not used it so have no clue.. Because you do not have the n8013 exactly to what i have . READ Other info before you follow my advice ...
Good Luck.
2350
erica_renee said:
That likely means your boot loader is stopping you from flashing a rom not meant for you device. YOU May be able to pull the boot-loader out of the rom then reflash . DO SO WITH CAUTION ... Also some have had been able to flash with mobile odin. I have not used it so have no clue.. Because you do not have the n8013 exactly to what i have . READ Other info before you follow my advice ...
Good Luck.
Click to expand...
Click to collapse
Thanks for the suggestion. I will try and post the results.
Hel needed. Same problem you had
sirishkv said:
Thanks for the suggestion. I will try and post the results.
Click to expand...
Click to collapse
Hi sirishkv,
I have exactly the same tab model and the same problem of the tablet being freezed at the samsung logo. Could you solve it? Would you mind sharing? Is there a way of keeping the personal data intact or recover it somehow?
I run out of ideas to solve this so thank you so much for your help.
PIUGA said:
Hi sirishkv,
I have exactly the same tab model and the same problem of the tablet being freezed at the samsung logo. Could you solve it? Would you mind sharing? Is there a way of keeping the personal data intact or recover it somehow?
I run out of ideas to solve this so thank you so much for your help.
Click to expand...
Click to collapse
There is no way you can recover your personal data at this stage. All you can do is bring it back to live.
I found the original Rom and flashed back with the same rom. The Note is back to normal.
Try in the internet for the factory firmware with the same model. you will get it. Good luck. :good::good::good:
sirishkv said:
There is no way you can recover your personal data at this stage. All you can do is bring it back to live.
I found the original Rom and flashed back with the same rom. The Note is back to normal.
Try in the internet for the factory firmware with the same model. you will get it. Good luck. :good::good::good:
Click to expand...
Click to collapse
Hi dear mate.
i have same device m485w. I bought it a few days ago. But os update stopped. Just jelly...
so i ported 4.4.4 based rom for m485w by using m480w firmware.
i modified kernel, boot.img3
now it works well.
Also for gnabo rom v8.0 i modified. It works well. It will solve be loved our devices' brick.
if some user want to this, i will share and make thread. But there are a few user using m485w device.
do you want? Thank you
rasido said:
Hi dear mate.
i have same device m485w. I bought it a few days ago. But os update stopped. Just jelly...
so i ported 4.4.4 based rom for m485w by using m480w firmware.
i modified kernel, boot.img3
now it works well.
Also for gnabo rom v8.0 i modified. It works well. It will solve be loved our devices' brick.
if some user want to this, i will share and make thread. But there are a few user using m485w device.
do you want? Thank you
Click to expand...
Click to collapse
Hi,
Sure that would definitely help. My Note M485W is still on Jelly and not able to get any updates.
Please explain the procedure to make the device upgrade-able with the suitable ROM... etc
Thanks in advance.
sirishkv said:
Hi,
Sure that would definitely help. My Note M485W is still on Jelly and not able to get any updates.
Please explain the procedure to make the device upgrade-able with the suitable ROM... etc
Thanks in advance.
Click to expand...
Click to collapse
Hi
ok. In this weekend, i will upload samsung latest kk4.4.4 ni6 version modified by me.
now i am asking permit about using kernel. I have already done kernel work.
you may hope that.
and personally can u help me? To work this my param.bin is changed as n8000
it is same with our device. But for samsung service center i should rollback because language is different
If u help me i will give you flashing zip. This zip file copy m485 param.bin to sacard. whether u help me or not
tonight, personally i will pm with. Gnabo v8 version.4.4.2 for m485 device.
and after getting permission from boeffla. I will upload 4.4.4 version.
pls. Help me. i will help our m485 user. Thank u
rasido said:
Hi
ok. In this weekend, i will upload samsung latest kk4.4.4 ni6 version modified by me.
now i am asking permit about using kernel. I have already done kernel work.
you may hope that.
and personally can u help me? To work this my param.bin is changed as n8000
it is same with our device. But for samsung service center i should rollback because language is different
If u help me i will give you flashing zip. This zip file copy m485 param.bin to sacard. whether u help me or not
tonight, personally i will pm with. Gnabo v8 version.4.4.2 for m485 device.
and after getting permission from boeffla. I will upload 4.4.4 version.
pls. Help me. i will help our m485 user. Thank u
Click to expand...
Click to collapse
I am not getting what help you are requesting, its too technical for me. I am not that techie.
But I am willing to help if you need some thing to be extracted from M485W and provide to you.
sirishkv said:
I am not getting what help you are requesting, its too technical for me. I am not that techie.
But I am willing to help if you need some thing to be extracted from M485W and provide to you.
Click to expand...
Click to collapse
Hi
it is very easy. I just give .zip file. Just flash by using twrp or phills recovery.
after flashing. Param.bin saved your sdcard automatically..
thank you. It is very safety
rasido said:
Hi
it is very easy. I just give .zip file. Just flash by using twrp or phills recovery.
after flashing. Param.bin saved your sdcard automatically..
thank you. It is very safety
Click to expand...
Click to collapse
Sure. I am ok to help you. Provide me the .zip file.
Note: Samsung Galaxy note 10.1 - SHW-M485W (Android 4.0.x) does not support SD card. There is a provision to SD card but I cannot move any apps. So is there any way to give you the param.bin
sirishkv said:
Sure. I am ok to help you. Provide me the .zip file.
Note: Samsung Galaxy note 10.1 - SHW-M485W (Android 4.0.x) does not support SD card. There is a provision to SD card but I cannot move any apps. So is there any way to give you the param.bin
Click to expand...
Click to collapse
Hi ok.
Don't worry about that. There are 2 ways.
1. After installing gnabo v8.0 rom, flash .zip
His rom is great. sdcard limitation was solved in his rom.
2. But i think that .zip will work. It is not related os. ^^
How can android make directory and files in sdcard when stalling by using odin or something
Are u use rooted rom? It is impotant.
sirishkv said:
Sure. I am ok to help you. Provide me the .zip file.
Note: Samsung Galaxy note 10.1 - SHW-M485W (Android 4.0.x) does not support SD card. There is a provision to SD card but I cannot move any apps. So is there any way to give you the param.bin
Click to expand...
Click to collapse
hi I sent pm with some files. Check your pm
Guys just bricked by N8013 , cant access to recovery mode, only on download mode. any1 has odin file ?
bikrame said:
Guys just bricked by N8013 , cant access to recovery mode, only on download mode. any1 has odin file ?
Click to expand...
Click to collapse
Did you ever find it ...? I didn't Brick my device I'm only looking to return to stock for the GT-N8013 , but I might as well hit the jackpot because it seem's the odd's woul'd be better , even trie samfirmware still can't find it let me know please and posta link if you ever find it Thak's
Philly Jim said:
Did you ever find it ...? I didn't Brick my device I'm only looking to return to stock for the GT-N8013 , but I might as well hit the jackpot because it seem's the odd's woul'd be better , even trie samfirmware still can't find it let me know please and posta link if you ever find it Thak's
Click to expand...
Click to collapse
I did find 4.0.4 on sammobile.com. there was 4.1.2 too but couldnt download it so downloaded 4.0.4 and i did update after that. Try it on sammobile otherwise post here. I will give you some way.
bikrame said:
I did find 4.0.4 on sammobile.com. there was 4.1.2 too but couldnt download it so downloaded 4.0.4 and i did update after that. Try it on sammobile otherwise post here. I will give you some way.
Click to expand...
Click to collapse
I saw on sammobile 4.1.2 but not sure if that will work for us ...? in nay case if you have the tar file for 4.01 could you please post a link so I don't have to go threw all the sighn in stuff....? Thank You
Philly Jim said:
I saw on sammobile 4.1.2 but not sure if that will work for us ...? in nay case if you have the tar file for 4.01 could you please post a link so I don't have to go threw all the sighn in stuff....? Thank You
Click to expand...
Click to collapse
Here is link bro, i opened thread on general section.
http://forum.xda-developers.com/showthread.php?t=3032822
Stock Odin Firmware for N8013