[Q] Galaxy S 4G bricked phone believes its a vibrant, please help. - Samsung Galaxy S (4G Model)

So we were tampering with his phone because he wanted it rooted and he flashed the kernel and ended up with a wrong kernel for the i9000. The phone was stuck on the start-up screen showing the new kernel followed by a black screen. Afterwards he asked me to help so together we messed it up even more; we download a program called AIO vibrant toolbox 2.5 to return the phone to factory settings believing they were the same phone (essentially). Now the phone seems to be looping the start-up only showing Samsung Vibrant which its not, its the SGS 4G. We can enter download mode but not recovery mode. Please Help we've searched the internet as well as these forms and found no similar problem at least for the SGS 4G, Thank you in advanced.

If you can get into download mode then just use Odin to flash a stock firmware you can try ravers kj6 stock look for it on the development section
http://forum.xda-developers.com/showthread.php?t=1353176
There's the link to the thread download that file and follow the instructions to flash it with Odin and you'll be fine.
Sent from my SGH-T959V using XDA App

You flashed incorrect boot loaders. As mentioned above you need the kj6 stock ROM with boot loaders to recover. Flashing incorrect boot loaders can make your device an expensive paper weight so do plenty of research (read, read, read) before you flash again I recommend heimdall there is a complete stock one click from the kies tar ball update. I made a noob guide herehttp://forum.xda-developers.com/showthread.php?t=1422824 Or if you are familiar with Odin go over here http://forum.xda-developers.com/showthread.php?t=1351783
Sent from my SGH-T959V using XDA App

Your phone is alive. Congrats, you are lucky
Sent from my SGH-T959V using xda premium

Please use the Q&A Forum for questions Thanks
Moving to Q&A

Thank you very much, it worked well.

Related

[Q] COMPLETE Noob Bricked Samsung Vibrant While Flashing New Rom (Please Help! :( )

Hey Guys,
So I am definitely new to this and may have made a huge noob mistake...
I rooted my phone successfully using 1click root.
Then I tried installing the Bionix zip file as well as the DoW 1.4ghz overclock zip file...and my phone kept getting stuck on the boot screen that says "Team Whiskey" for like over 30-45mins. Even when I turn my phone on now, it stays stuck there. Is my phone bricked? I had my entire internal memory of 16gb full of music so at first I assumed it was b/c of that, but I think I might be bricked.
I ultimately just wanted to be able to use Bionix (or Fusion) with all the goodies like lag fix, and if possible, to flash the overclock zip as well.
What is going on here? How can I fix my phone? I would sincerely appreciate your expert advice!
What you say is one kind of brick, but this is the easiest to solve. All you have to do is reflashing the device using Odin. If you search a bit you'll find tutorials about it (samdroid.net has a tutorial for Spica, but I think the method is the same just the files are different). Good luck!
Sent from my GT-I5700 using XDA App
What you say is one kind of brick, but this is the easiest to solve. All you have to do is reflashing the device using Odin. If you search a bit you'll find tutorials about it (samdroid.net has a tutorial for Spica, but I think the method is the same just the files are different). Good luck!
Sent from my GT-I5700 using XDA App
__________________

[Q] soft bricked s4g now stuck in voodoo

First off, Thanks to everyone for the posts and for future patience.
I know there has been a lot of discussion on this subject, but I seem to have elevated it to a new level of loopy. Bear with me, please; I'll make whatever changes needed. I have researched/read a lot tried many of the recommended procedures and frankly, I think it has all become mud stew in my head. My wife is none too happy, and if you guys could help me save my genitals/marriage, I'd be much appreciative.
The facts: 1 T-Mobile SGS4G t959v, 1 Mac os X 10.6.8, 1 Heimdall 1.3.1 and 1 ticked-off wife.
So, following the xda forum, I successfully rooted the device. Then I downloaded ROM manager and installed CwM (now I realize the error of my ways), downloaded and flashed Bionix. Phone looped "3e" recovery.
After much research, found heimdall on XDA, and was able to get the recovery image changed to CwM Voodoo Lagfix Recovery v3.0.2.8x. Now, I'm looping that recovery. Tried the bali 3.3 kernel, flashed just fine. found sgs4g official gb2.3.6....Rom, flashed just fine. Still, I remain at the red voodoo screen.
Obviously, I can access the sd card through my mac, and have tried various update.zip procedures, and various ROMs.
So, I've been reading for several days now, poring over these and other forums, and if I understand it correctly, bali3.3_heimdall.tar.gz (thank you very much!) is supposed to undo the ROM manager screw up from earlier (and I can only think that I am missing some critical info here), but no, still looking at the voodoo recovery.
I AM kind of new to this, however I have rooted and modded 4- MyTough 3g's and a defy, All running CMx.
Thanks again,
SN
Try disabling voodoo lag fix and see if that helps
Sent from my HTC_Amaze_4G using xda premium
Thanks again,
it's done, with no change.
You are aware that Bali3.3 is a Froyo kernel? If the last rom you flashed was GB 2.3.6 then try flashing a GB kernel and make sure your mounts are correct.
missed the bali/froyo. does this imply that I might flash a froyo rom over bali? or do I need to flash a gb kernel for the 2.3.6 rom? Also, I'm using heimdall and I don't know how to use non-.tar files with it; or if you can.
supernugget said:
missed the bali/froyo. does this imply that I might flash a froyo rom over bali? or do I need to flash a gb kernel for the 2.3.6 rom? Also, I'm using heimdall and I don't know how to use non-.tar files with it; or if you can.
Click to expand...
Click to collapse
:facepalm:
There are line-by-line instructions all over this forum to install kernels and custom roms.
The search button is your best friend here. Use it! Google can also search the xda forum... try starting your search with: site:forum.xda-developers.com
For example:
Code:
site:forum.xda-developers.com Galaxy S 4G Heimdall
or
Code:
site:forum.xda-developers.com galaxy s 4g download mode
Learning to use XDA will help you find what you need. Following the rules will help you get answers.
I say all this, because every problem you are having is already answered in this forum!
Please use the Q&A Forum for questions Thanks
Moving to Q&A

[Q] NEEd help bricked my phone!

Hi guys I'm new to this flashing etc world. I used rom manager and installed the wrong clokworldmod and my phone only loads samsung galaxy s 4g screen. I saw the thread about not using rom manager but I already did yesterdey. I'm trying to gain access to download mode with odin but I'm not able to get in!
Drake316PR said:
Hi guys I'm new to this flashing etc world. I used rom manager and installed the wrong clokworldmod and my phone only loads samsung galaxy s 4g screen. I saw the thread about not using rom manager but I already did yesterdey. I'm trying to gain access to download mode with odin but I'm not able to get in!
Click to expand...
Click to collapse
yeah, ROM Manager is a bad thing when it comes to our phone.
ODIN does not put your phone in download mode. There are numerous ways to accomplish that and those are outlined in a few different posts here as well as the wiki.
Do you know if you were on Froyo or Gingerbread before you tried to flash something? Also, what ROM did you try to flash? Going from Froyo to Gingerbread, and vice versa, requires you to flash the proper boot loaders.
I suggest checking out Lumin30's [GUIDES] Fresh out of box Galaxy S 4G [SOLVED] | Heimdall One-Click For Dummies. Awesome guides and they should get you back to a working status.
Reply
I was on Gingerbread 2.3.6 something like that, I wanted to flash to Vahalla Black but didn't even get close to that process sorry for my english. I will check the guides thanks for the fast respond! Thanks again already on download mode!
No worries on the English; you did quite well
Let us know how it goes and if you need help. There are plenty of us here that can help. Once you get the one-click installed, you should be able to flash Valhalla Black with no problem.
Good luck!
Just fine I think
Sent from my SGH-T959V using xda premium
Thanks!!
Thank you very much!! Fixed my phone thanks to you and XDA! I will try to install a custom rom this time I hope to do it well thanks to the links you provided.
Question about flashing ROM
Hi, I fell I'm missing something I don't know where to start so I can flash my already rooted phone with Vahalla Black. Sometimes I read use CWM, other post dont use it,etc I feel lost here. Could you just let me know what I need to flash, software etc.
Drake316PR said:
Hi, I fell I'm missing something I don't know where to start so I can flash my already rooted phone with Vahalla Black. Sometimes I read use CWM, other post dont use it,etc I feel lost here. Could you just let me know what I need to flash, software etc.
Click to expand...
Click to collapse
Use the method in the guide in the first link of my signature. Look for Flashing Custom ROM's. You will be using CWM to get Valhalla Black on your phone. The guide has step by step directions.

Won't get past "download mode"

I followed the directions of this video on my SGS4G: http://www.youtube.com/watch?v=tR31U0KK2n8
I was trying to flash AOKP and everything went fine until it was finished but the phone went into a boot loop. I went back to "download mode" and attempted to try it again and it didn't work.
I could still get into download mode and flash anything but it wouldn't get past that. Then I decided to give up and I took out the battery and unplugged it (it wasn't downloading at the time). Now I can't even get into download mode, but the phone is would keep booting saying "Vibrant" and then it would go to a pixelated screen.
What should I do? Am I bricked? Can I fix this using Odin or something?
Thanks in advance
http://forum.xda-developers.com/showpost.php?p=21953878&postcount=2
Be mezmerized, and don't ever flash another rom besides the ROM's we have here.
The Vibrant IS NOT the SGS4G. The Vibrant is T959, the SGS4G is the T959V or T959W if you're in Canada. Hopefully 1-click will take you back, but if you flashed a Vibrant bootloader on your SGS4G, you may have bricked it. Hopefully someone with more knowledge can help you, because it seems you flashed the entirely wrong ROM to your phone because it's not for your phone and flashing the wrong bootloader is about the 1 thing that can really brick a phone good.
Looks like I did install the wrong boot loader for my phone which is the sgh-t959v, I used the vibrant instead...is there any way to fix this or am I filly bricked? I can't get into download mode, and the phone is in a boot loop
Try one of the one clicks here in this forum to bring you back to stock
Bhudven's Heimdall One Click and flash with bootloaders. Stay on stock. Read forums. Then keep being on stock ROM. JK... Then try eollie's Heimdall One Click or thomas' Odin Gremlin Remover. With these 2, you should be in a rooted stock ROM. When flashing a custom ROM, check the OP and read the instructions. Make sure it's for your phone.
*I'm tired of giving same instructions over and over again.
Solved
rbedell said:
Solved
Click to expand...
Click to collapse
Is there a tutorial anywhere I can use? Thanks in advance btw...
When I plug my phone into the computer I can get into download mode, I'm guessing from here you just flash back the stock Rom from Odin?
Also, when I use Odin to flash back to stock, do I need to download any other files other than the one specified in this link: http://forum.xda-developers.com/showthread.php?t=1353176
Thanks for everyone's help, I hate to be a bother
@ARsportsfan14
Use bhudven's Heimdall One Click. It's simpler.

[Q] Galaxy S 4G stuck on boot screen

I have a rooted Galaxy S 4G T959 that all of a sudden decided it wanted to freeze on the boot screen. Even when I plug it up to charge it it just shows and empty battery gauge. I updated the phone using kies mini to the latest gingerbread software. The root I used I found on youtube. The file names are heimdall-suite-1.3.1-win32 and I used a driver called zadig. I'm not familiar with the workings of developing and rooting but I'm trying to learn. Which is why I have no idea how to get my phone off the boot screen. If anyone who's had this problem can help please do. I cant get into the phone to check and see if I still have development mode on. Any help you guys can give would be great. thanx
If you rooted with heimdall and then updated using kies you lost root if I'm understanding correctly the order you did this stuff
Do you have cwm? If so just download a rom...slap it on your SD card and install new rom that way.
If not you need to return to stock using heimdall one click or odin. You can search the forum for this stuff. Use that then use a custom GB kernel to get CWM and root using heimdall/odin
Sent from my SGH-T959V using xda premium
Do you have a T-959 or a T-959V? Check under your battery to make sure it's got a V in the model before you flash anything! If it's not the correct phone you can hard brick.
If you DO have a T-959V (Notice the V at the end there? Again, make sure your phone is the correct one) then follow this guide:
http://forum.xda-developers.com/showpost.php?p=21953878&postcount=2

Categories

Resources