Related
I recently switched to the Atrix 2 from the HTC Aria. I have the Atrix 2 rooted and the bootstrapper installed. When the Aria was off I would hold the volume down button and power it on directly into recovery mode. Is this somehow possible on the Atrix 2 or do I have to go through the bootstrapper app every time??
Thanks
vujkovicv said:
I recently switched to the Atrix 2 from the HTC Aria. I have the Atrix 2 rooted and the bootstrapper installed. When the Aria was off I would hold the volume down button and power it on directly into recovery mode. Is this somehow possible on the Atrix 2 or do I have to go through the bootstrapper app every time??
Thanks
Click to expand...
Click to collapse
Ya. Sorry to say. But ya its bootstrap everytime. To get into recovery that way, same as the aria, someone would have to unlock the bootloader or figure out a work around...
vujkovicv said:
I recently switched to the Atrix 2 from the HTC Aria. I have the Atrix 2 rooted and the bootstrapper installed. When the Aria was off I would hold the volume down button and power it on directly into recovery mode. Is this somehow possible on the Atrix 2 or do I have to go through the bootstrapper app every time??
Thanks
Click to expand...
Click to collapse
You could also intall JY daddy's RZR CWM at boot. This will boot into CWM everytime you boot. The only downfall is it has been causing GPS issues but there is a removal zip also.
thanks
I am going to try and install the victory rom now, hopefully I dont mess up and I wont need to restore the cwm back up
JRW 28 said:
You could also intall JY daddy's RZR CWM at boot. This will boot into CWM everytime you boot. The only downfall is it has been causing GPS issues but there is a removal zip also.
Click to expand...
Click to collapse
+1
Although, all our ROMs aren't effected by the GPS bug with CWM on boot zip. Victory ROM v1.1 works fine with it.
Sent via Tapatalk with VictoryRom_v1.1
KEB64 said:
+1
Although, all our ROMs aren't effected by the GPS bug with CWM on boot zip. Victory ROM v1.1 works fine with it.
Sent via Tapatalk with VictoryRom_v1.1
Click to expand...
Click to collapse
Yep. and is quite acurrate too
thanks
thnaks guys you gave me the courage to go for it an install a new rom. I installed the vicory rom and I love it. Its simple, fast and was just like flashing a new rom on my old aria, so thanks everyone who has worked on this. I have used this forum for years, but only now did I become active so I can't thank developers since I havent gotten my 10 posts yet. Im working on that and maybe soon being able to participate more in developing threads.
guys switching from aria to other phones are complaining about their experience while trying to customize their phones, but I can happily say everyone working on the Atrix 2 has been more than helpful and patient with me so again thank you
Pls help-
I'm not quite a noob, but def no dev... got my Atrix 2 rooted using mastermind's 1-click method, installed bootstrap & flashed clockworkmod recovery- everything went fine until trying to flash/restore the ROM itself. I followed the instructions to the letter (save ROM in cwm backup folder, wipe cache & data, do not flash zip... restore in recovery). Yet i've bricked 2 atrix 2's trying to install this rom. Luckily the store I work at was good about letting me switch out, but kinda scared to brick a 3rd device. It just errors on restore then goes back to cwm. I try to reboot and cant get past the moto startup screen.. I'm sure i'm doing something wrong, cuz I know it should work (there are screenshots in the thread)... any help?
Sent from my MB865 using XDA
Did you unzip the rom and then put the contents in the backup folder?
You do know that you are more than likely going to be charged full price of the phone if you are returning a bricked phone to the store.
Sent from my SAMSUNG-SGH-I997 using xda premium
Why not flash the FXZ and start over?
Sent from my MB865 using xda premium
tmease1 said:
You do know that you are more than likely going to be charged full price of the phone if you are returning a bricked phone to the store.
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
Luckily I work for a phone sales store, so they didn't charge me full price, as I blamed the phone bricking on a "bad software update" (which is kinda true- if the rom had restored properly, I wouldn't have been bricked in the 1st place)
; )
and it was still within the exch. period anyway... But that's neither here nor there... Yez, I unzipped the folder into the cwm backup folder. Not sure about reflashing fxz, havent tried that yet... don't really know how, never had to do that? I've flashed dozens of roms on my HTC & Samsung galaxy phones, but this is my first exp. w/ moto. So any help u can give is appreciated.
Sent from my MB865 using XDA
No, not sure how to do that?
Sent from my MB865 using XDA
jzachary78 said:
Luckily I work for a phone sales store, so they didn't charge me full price, as I blamed the phone bricking on a "bad software update" (which is kinda true- if the rom had restored properly, I wouldn't have been bricked in the 1st place)
; )
and it was still within the exch. period anyway... But that's neither here nor there... Yez, I unzipped the folder into the cwm backup folder. Not sure about reflashing fxz, havent tried that yet... don't really know how, never had to do that? I've flashed dozens of roms on my HTC & Samsung galaxy phones, but this is my first exp. w/ moto. So any help u can give is appreciated.
Sent from my MB865 using XDA
Click to expand...
Click to collapse
I had a similar problem, found the unzipped folder nested 2x under clockwork/backup.
Like this
sdcard/clockworkmod/backup/myrom/myrom
What I did was move all the files from second folder to the first then deleted second folder.
Hope I am clear and that it helps.
ATRIX 2 / Victory Rom
smgulsby said:
I had a similar problem, found the unzipped folder nested 2x under clockwork/backup.
Like this
sdcard/clockworkmod/backup/myrom/myrom
What I did was move all the files from second folder to the first then deleted second folder.
Hope I am clear and that it helps.
ATRIX 2 / Victory Rom
Click to expand...
Click to collapse
Can you post a like for the victory Rom, I'm kinda scared to install without the bootloader being unlocked and Id like something that's not att stock
I actually did find an extra set of files in the cwm backup folder & deleted them... so ur pretty confident that I should be able to install this ROM now? and (just to clarify) I don't need to flash the zip before restoring in cwm (that just doesn't make sense to me, but w/e works)? Thx for ur help
Sent from my MB865 using XDA
jzachary78 said:
I actually did find an extra set of files in the cwm backup folder & deleted them... so ur pretty confident that I should be able to install this ROM now? and (just to clarify) I don't need to flash the zip before restoring in cwm (that just doesn't make sense to me, but w/e works)? Thx for ur help
Sent from my MB865 using XDA
Click to expand...
Click to collapse
Unzip rom, move the folder with the 2 files, to CWM/BACKUP.....boot into recovery, choose BACKUP/RESTORE, and restore the rom.
Sent from my MB865 using Tapatalk 2 Beta-5
So the problem is that you stuck on motorola dual core logo?
Just try to flash fxz,it's pretty simple. You just need the file you need and let the pc doing everything while you watching a tv.
I got this problem twice when i try to flash victory rom this morning,wich is caused by a corrupt file.
And everything is sorted out by flashing fxz.
Trust me,it works! (It sounds like commercials on tv )
You can always boot to recovery and when you see the android with the exclamation press both volume rockers to reset to factory.
Sent from my MB865 using xda premium
elaborate
kisnerct said:
You can always boot to recovery and when you see the android with the exclamation press both volume rockers to reset to factory.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
would you be kind and elaborate on this?
kojitabe said:
So the problem is that you stuck on motorola dual core logo?
Just try to flash fxz,it's pretty simple. You just need the file you need and let the pc doing everything while you watching a tv.
I got this problem twice when i try to flash victory rom this morning,wich is caused by a corrupt file.
And everything is sorted out by flashing fxz.
Trust me,it works! (It sounds like commercials on tv )
Click to expand...
Click to collapse
Just in case that happens again- what is the file I'll need when I connect to PC... u just mean the ROM files, or is there a diff fxz file i'm not aware of?
Sent from my MB865 using XDA
kisnerct said:
You can always boot to recovery and when you see the android with the exclamation press both volume rockers to reset to factory.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
actually tried that a cpl times via chat w/ a tech support rep from moto on first bricked device, it still wouldn't reset...
Sent from my MB865 using XDA
Flash Fix
This link can explain alot of your questions and hopefully have an answer for you as well.
http://forum.xda-developers.com/showthread.php?t=1396650. This is where I started to look when I began researching how to return my phone back to stock.
Installing the roms
if anybody could please tell me.......can I install Droid 3 or Droid razr's custom roms unto my Atrix 2. Would it work..? (Coz of the three phones bear same chipset i.e Powervr540)............Please help me out....i'm afraid if i'll brick my phone by doing this......!
devil.jeet said:
if anybody could please tell me.......can I install Droid 3 or Droid razr's custom roms unto my Atrix 2. Would it work..? (Coz of the three phones bear same chipset i.e Powervr540)............Please help me out....i'm afraid if i'll brick my phone by doing this......!
Click to expand...
Click to collapse
The devs have got some roms from other moto phones to boot but have problems mostly with the radio and probably a handful of other things. I would highly recommend you not try to do this. We have plenty of good roms here in the dev section that you can flash that are good roms. Generally if you follow the instructions for each rom you would be fine but if you are afraid of bricking your phone make sure you read a lot before attempting anything and always make sure you have a way back to stock.
Sent from my SAMSUNG-SGH-I997 using xda premium
Just picked up my G3, rooted and unlocked bootloader as soon as i got home. Downloaded one of the jelly bean roms and cwm, did a backup then flashed the rom. Everything looked fine but the screen went dark after the boot animation then nothing. Wont power up or reset using the power home volume combo. What the heck do i do now, thanks for any help.
Might be a stupid question, but have you pulled the battery?
Be more specific.
VZW GALAXY S 3 4G LTE
Do YOUR homework first
How about reading all the threads about unbricking. It certainly seems you did not read all the threads about rooting the phone. Do that too.
Finally, and I know this is not that helpful. Don't screw with a new phone. Use it at least for a month to make sure there are no problems with it.
That being said, there is plenty of information about how to handle your problem here in xda. Read all that and try what has already been posted before asking people to solve your self inflicted problem.
BTW when you do ask for help specify exactly what you did, with what script. I.E. don't ask someone to solve your problem without you taking the time to be very specific about how you got there.
pull the battery and go into recovery or odin and fix it.
Dead battery?
Sent from my Transformer TF101 using xda premium
Skubacb - Don't be a douche buddy. If you do not have any thing to add then shut the **** up.
With that being said I have been rooting phones for years, never had an issue when I couldn't get the phone to at least go into recovery. The phone is dead. Battery was fully charged and I have done a battery pull. It is a Verizon G3. I have read the unbrick articles but none explain if the phone will not boot into recovery. If someone could could just point me in the correct direction I would greatly appreciate it.
How did you actually do the flash? Odin? Some other way? As noted, more details are needed.
I flashed the new rom using Rom manager, went in to revovery and flashed it
jmill75 said:
I flashed the new rom using Rom manager, went in to revovery and flashed it
Click to expand...
Click to collapse
I don't believe rom manager is supported for our phone yet. U need to flash straight from recovery. That said I'm sorry I'm not sure where u go from here.
Sent from my SCH-I535 using xda premium
If you can't get into either recovery , or download mode you maybe SOL. However I would take this to IRC and see if someone can help on there. #verizons3 channel.
If the phone is under warranty, one other alternate solution is to take it into a VZW store and say it won't start. Of course I'd only go that route if I couldn't get it going any other way. On the plus side, your could at least confirm that battery didn't die on you.
Looks like you forgot to flash the insecure bootloader, buddy.
Sent from my SCH-I535
Rom manager is supported I flashed clockwork there And the 3 cm nightlies
Sent from my SCH-I535 using Tapatalk 2
Keep this discussion to technical solutions only, please. Leave gray area ethics out of it.
JMink said:
I don't believe rom manager is supported for our phone yet. U need to flash straight from recovery. That said I'm sorry I'm not sure where u go from here.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Completely incorrect.
mikeew83 said:
Rom manager is supported I flashed clockwork there And the 3 cm nightlies
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Me too, been doing it since 6.0.1.2
abissel22 said:
Looks like you forgot to flash the insecure bootloader, buddy.
Sent from my SCH-I535
Click to expand...
Click to collapse
I'm gonna go with this one (possibly). Did you unlock the phone? Sorry, did you say it won't boot into anything? Download/Odin mode? Recovery? Anything at all when you do the vol up/down, home key, and power button?
Idk if this would help but I'd order a downloader jig off ebay for a couple dollars and use that to see if it'll boot to recovery
Sent from my GT-I9300 using xda app-developers app
Me too
I went to turn on my Verizon SGS3 on this morning and nothing happened. I have not even rooted it yet. It was charged when I turned it off 5 minutes before that and even did a battery swap. Phone is completely dead. Will not turn on. I have had it since it first came out, so I called Verizon and they are over-nighting me a "like-new" one. I hope I don't hear more of these stories.
jmill75 said:
Just picked up my G3, rooted and unlocked bootloader as soon as i got home. Downloaded one of the jelly bean roms and cwm, did a backup then flashed the rom. Everything looked fine but the screen went dark after the boot animation then nothing. Wont power up or reset using the power home volume combo. What the heck do i do now, thanks for any help.
Click to expand...
Click to collapse
I had a similar issue. If you do the volume/home/power combo (try both volume buttons separately, i forgot which one worked) and hold them through the initial Samsung logo it should put you into download mode, where you can Odin back to stock. I used PureMotive's Unbrick method in the Dev section (I think) and it took all of 20 min. Just make sure to follow the directions carefully.
Sent from my SCH-I535 using xda app-developers app
Is there a difference is button sequence between recovery and download mode? (I thought it was the same thing)
Sent from my SCH-I535 using XDA Premium App
Okay, so here's a long story short. I flashed AT&T ICS leak #2 when I first got my replacement due to a brick. I ran SCV7 for a week or so and decided to try out CM10. I restored my backup of stock/rooted backup. Uninstalled highjacks, packages and app (bootmenu) itself. I then installed our OG A2 bootstrap, installed fine, installed CM10, played around with it for awhile. Realized I didnt reinstall the OG A2 Bootstrap so went ahead and did that. (without booting into recovery yet) I then later in the day decided to REBOOT my phone to only find me stuck on the CM10 boot animation. I battery pulled, plugged in to see if any recovery would show, none, just the battery charge percentage. I then battery pulled again, got into stock recovery, tried a data and cache wipe to no effect. My problem is, there is NO FXZ for the AT&T leak #2, I have no recovery besides stock and the only thing I can do is take my 32GB SD card out and add/delete files/everything. I saddly did not make a copy of the system.img but was wondering if anyone else possibly did? This would be greatly appreciated as I am stuck with a soft brick until then or a new FXZ to work with AT&T leak #2. Any suggestions or help is very much appreciated. Thanks all for reading and I'm praying for a miracle in my phone right about now lol!
DX2Trip said:
Okay, so here's a long story short. I flashed AT&T ICS leak #2 when I first got my replacement due to a brick. I ran SCV7 for a week or so and decided to try out CM10. I restored my backup of stock/rooted backup. Uninstalled highjacks, packages and app (bootmenu) itself. I then installed our OG A2 bootstrap, installed fine, installed CM10, played around with it for awhile. Realized I didnt reinstall the OG A2 Bootstrap so went ahead and did that. (without booting into recovery yet) I then later in the day decided to REBOOT my phone to only find me stuck on the CM10 boot animation. I battery pulled, plugged in to see if any recovery would show, none, just the battery charge percentage. I then battery pulled again, got into stock recovery, tried a data and cache wipe to no effect. My problem is, there is NO FXZ for the AT&T leak #2, I have no recovery besides stock and the only thing I can do is take my 32GB SD card out and add/delete files/everything. I saddly did not make a copy of the system.img but was wondering if anyone else possibly did? This would be greatly appreciated as I am stuck with a soft brick until then or a new FXZ to work with AT&T leak #2. Any suggestions or help is very much appreciated. Thanks all for reading and I'm praying for a miracle in my phone right about now lol!
Click to expand...
Click to collapse
Hey, and sort of welcome back...
But I hate to be the bearer of bad, bad news... you have a softbrick, and there is NOTHING you can do.
Next time, read everything in an OP... LOL, look who I am telling this to....
The CM10 installs come with their own CWM built in, and flashing bootstrap is what bootlooped you, so after you get another warranty replacement (yes, you HAVE to do this), I would install leak #1 ONLY, then flash cm10 with bootstrap, then do not reinstall any boot hijacks or CWM "like" recovery (bootmenu), because all you have to do it hit the vol down button right as you see the blue led flash during the M dual core logo.
Or enter the CM10 recovery menu and so on and so forth.
This is how I got out of a cm10 boot-loop.
I just restored from bootmenu backup via adb.
tcf38012 said:
Or enter the CM10 recovery menu and so on and so forth.
This is how I got out of a cm10 boot-loop.
I just restored from bootmenu backup via adb.
Click to expand...
Click to collapse
he can't, he installed bootstrap while on cm10m, so he can't get to cwm anymore.
Scratch that ----- Deleted
Well, thanks everyone. Specially you jim. Anyone wanna throw me an fxz they think MIGHT work for the second ICS leak? I'm willing to take the risk since I have nothing else to lose. Ill be most likely calling AT&T tomorrow and give some excuse. Soft brick or hard brick...Ill get a replacement...
Sent From My Eclipsed DROID X2!
DX2Trip said:
Well, thanks everyone. Specially you jim. Anyone wanna throw me an fxz they think MIGHT work for the second ICS leak? I'm willing to take the risk since I have nothing else to lose. Ill be most likely calling AT&T tomorrow and give some excuse. Soft brick or hard brick...Ill get a replacement...
Sent From My Eclipsed DROID X2!
Click to expand...
Click to collapse
I will get with alteredlikeness and see if we can possibly think of something together on this one. The first thought would be to try an mearet/searet fxz for 2.3.6 since they can fxz back with out any mods to thier 2.3.6 or 2.3.5 fxz from thier ICS leaks, but I am thinking that will still brick you, but interested to see anyhow.
So I will see if alteredlikeness and I can think of some other way to try. He or I will PM you either way.
jimbridgman said:
I will get with alteredlikeness and see if we can possibly think of something together on this one. The first thought would be to try an mearet/searet fxz for 2.3.6 since they can fxz back with out any mods to thier 2.3.6 or 2.3.5 fxz from thier ICS leaks, but I am thinking that will still brick you, but interested to see anyhow.
So I will see if alteredlikeness and I can think of some other way to try. He or I will PM you either way.
Click to expand...
Click to collapse
he can flash just a system. img from ics though, And that should recover it
Sent from my MB865 using xda premium
lkrasner said:
he can flash just a system. img from ics though, And that should recover it
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
You know, I was seeing in recovery how youbcan flash an update through sd AND system which has a lost and found folder and recovery folder. Dont know if this is of any info but either way because I wouldnt know how to put anything in system since I cant seem to get adb to recognize or moto-fastboot...I'm in a very confused state of mind and almost came to the point of hard brick but I refuse. I'll leave it up to ya devs. Thanks againg everyone.
Sent from my MB870 using xda premium
i have same issue , any way to flash system img, and where whould i get system img from? i have preiviously backed up thru cwm
justdrew said:
i have same issue , any way to flash system img, and where whould i get system img from? i have preiviously backed up thru cwm
Click to expand...
Click to collapse
Try following this:
http://forum.xda-developers.com/showthread.php?t=1926873
First Softbrick it seems In Trouble
jimbridgman said:
Try following this:
http://forum.xda-developers.com/showthread.php?t=1926873
Click to expand...
Click to collapse
Guys need your urgent help i am into a trouble what is it called technically may be a Soft brick but this is what has happened.
I was trying the Magic mod the installation went superb booted the phone it worked properly and then i used the bootstrap :silly: and tried starting the phone in recovery after which my phone is now stuck at magic mod boot animation. PLEASE HELP.
I am upto a point where have installed drivers latest rsd lite 6.0 ready with the extracted fxz 6.7.2_EDEM-18-SEARET_cfc.xml but phone is not showing up in rsd lite so that i can flash my phone. Phone says USB connected in AP Fastboot mode have a look at the attachment of my desktop. Please HELP guys....
Thanks & Regards,
Beginner Android (Ravi D)
havent you just posted this in the any question answered here thread and getting help there ??
Wow, almost forgot I made this thread lol. But sounds like your drivers need a good updating. Reboot PC after updating and try again is all I can say. Hope this helps.
Sent from my MB865 using xda premium
Just replaced Samsung Galaxy Nexus with this razor. Should be a step up right? Apparently I'm spoiled. Wife has the bionic so I'm familiar with the basic process.
Doing research, resetting the device like 15 times and reading a ton of threads in the last couple days, it looks like I have the phone itself actually rooted however I'm not able to fully install safe strap.
What's interesting to me is that I can use programs that require root access far as I can tell with no issue, root checker shows root is available as well. Trying to reboot into recovery though does not give me the safety strap splash screen to choose any kind of recovery option. Just rolls into DROID...
Is this pretty normal if the previous owner accepted the OTA update to take me to 9.18.79? Are we stuck?
Sent from my DROID RAZR HD using xda app-developers app
Did you open safestrap and install recovery?
Sent from my XT912 using Tapatalk 4
Sure did. Says installed and from all the videos I've seen explaining the install/usage and my wife phone installation, I'm quite sure it's installed.
I've tried multiple versions just to be sure clearing data and uninstalling previous versions etc.
At this point I'm just not sure if this is normal or not because of the OTA version that's on here.
Sent from my DROID RAZR HD using xda app-developers app
Thinking that the safe strap process should be the same but realized that there is a set of HD XT926 forums I should probably be posting in. Didn't realize the differences.
Mod move this post if needed.
Thanks anyways.
Sent from my DROID RAZR HD using xda app-developers app
You can prove with BMM hmmmmm!!!
vegaIT said:
You can prove with BMM hmmmmm!!!
Click to expand...
Click to collapse
Tried to install bmm from the Play Store however it did not seem compatible with my XT 926. Am I missing something?
Sent from my DROID RAZR HD using xda app-developers app
Going to try something called philz touch. Let's see if I get better results. Anyone try it?
Sent from my DROID RAZR HD using xda app-developers app
Just wondering, it wasn't clear, are you on the 9.18.79 build or not sure? A screen shot of your "about phone" screen could tell unless someone rolled back. Only reason I ask is, safest rap is great if there are no options but unlocked is where the real profit is.
Sent from my XT926 using XDA Premium 4 mobile app
bweN diorD said:
Just wondering, it wasn't clear, are you on the 9.18.79 build or not sure? A screen shot of your "about phone" screen could tell unless someone rolled back. Only reason I ask is, safest rap is great if there are no options but unlocked is where the real profit is.
Sent from my XT926 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
yep, that's the version I'm at. I think I mentioned that in the original post. From everything I'm reading I should be able to install and run safe strap with no issues but it just doesn't ever bring up the menu. At this point I'm looking for alternatives I guess.
grnsl2 said:
yep, that's the version I'm at. I think I mentioned that in the original post. From everything I'm reading I should be able to install and run safe strap with no issues but it just doesn't ever bring up the menu. At this point I'm looking for alternatives I guess.
Click to expand...
Click to collapse
are you sure its not already unlocked?
if you havent already, i would flash back to clean stock, not just wipe/"reset", and try again. wiping wont get rid of or fix anything in the system directory.
First off don't attempt to flash any aftermarket recovery if your BL is locked, you might run into issues. Second, SafeStrap doesn't replace your stock recovery because you can't replace your stock recovery if you have a locked BL. To get into SS, just boot your phone normally. Once the phone boots, you'll get the SS screen that allows you to go into SS recovery or boot into OS normally. Once in SS, then you can start running backups, flashing, etc.
i didnt see anyone suggest he flash a stock recovery.
he got the phone used, maybe its already unlocked, i didnt see that possibility confirmed or denied.
bweN diorD said:
are you sure its not already unlocked?
if you havent already, i would flash back to clean stock, not just wipe/"reset", and try again. wiping wont get rid of or fix anything in the system directory.
Click to expand...
Click to collapse
When you say UNLOCKED, are you referring to the Boot Loader? If so, I do not believe that it is, just Root at this time.
RikRong said:
First off don't attempt to flash any aftermarket recovery if your BL is locked, you might run into issues. Second, SafeStrap doesn't replace your stock recovery because you can't replace your stock recovery if you have a locked BL. To get into SS, just boot your phone normally. Once the phone boots, you'll get the SS screen that allows you to go into SS recovery or boot into OS normally. Once in SS, then you can start running backups, flashing, etc.
Click to expand...
Click to collapse
100% agree with this, should be that simple. Happens properly on the Mrs Bionic so I'm familiar with that process. This phone doesn't produce the menu no matter what version of Safe Strap is installed (tried multiple).
bweN diorD said:
i didnt see anyone suggest he flash a stock recovery.
he got the phone used, maybe its already unlocked, i didnt see that possibility confirmed or denied.
Click to expand...
Click to collapse
Planning to go back to stock stock, beyond the wipe. I believe a previous poster mentioned that the standard wipe doesn't remove root. A fresh start may be my next step. Hoping the 1.32 Droid Razr Utility by Mattlgrof http://forum.xda-developers.com/showthread.php?t=2474393 will do that for me.
grnsl2 said:
When you say UNLOCKED, are you referring to the Boot Loader? If so, I do not believe that it is, just Root at this time.
100% agree with this, should be that simple. Happens properly on the Mrs Bionic so I'm familiar with that process. This phone doesn't produce the menu no matter what version of Safe Strap is installed (tried multiple).
Planning to go back to stock stock, beyond the wipe. I believe a previous poster mentioned that the standard wipe doesn't remove root. A fresh start may be my next step. Hoping the 1.32 Droid Razr Utility by Mattlgrof http://forum.xda-developers.com/showthread.php?t=2474393 will do that for me.
Click to expand...
Click to collapse
just boot into the bootloader screen (vol+power) and see if it says device locked or unlocked (may have to choose "fastboot", to see it i dont recall)
yes Matts utility will clean the phone for you, i updated it to 1.3+ for him
Used the utility to wipe the phone and reflash back to stock, at least that version. All seems good however moto chopper doesn't fully install root with superuser. I get the typical su binary needs to be installed and that fails.I did tried to run the updates in Play Store that was available as well as clearing data etc with no luck. I think the last time that I was able to successfully Foot I used a different Root program, razor maybe?
grnsl2 said:
Used the utility to wipe the phone and reflash back to stock, at least that version. All seems good however moto chopper doesn't fully install root with superuser. I get the typical su binary needs to be installed and that fails.I did tried to run the updates in Play Store that was available as well as clearing data etc with no luck. I think the last time that I was able to successfully Foot I used a different Root program, razor maybe?
Click to expand...
Click to collapse
read the post from the utility, the root in the utility is not the one you need to use. the correct one is in the post. (it actually says it in the command window of the tool too)
when i get time, ill try to integrate the new root.
Okay, my apologies, I thought it was updated 2 or 3 times in the last couple days and thought that was updated that as well. :thumbup:
Sent from my DROID RAZR HD using xda app-developers app
grnsl2 said:
Okay, my apologies, I thought it was updated 2 or 3 times in the last couple days and thought that was updated that as well. :thumbup:
Sent from my DROID RAZR HD using xda app-developers app
Click to expand...
Click to collapse
np, i did update it a few times, but working 6 days a week, i dont feel like messing with the root right now.
So I've just done option 1 with the factory reset, then ran moto chopper 1.32 and have good root. Confirmed. Ver. 9.20.1
Safe strap seems to be the only issue I keep having. The menu just simply doesn't come up while booting. Doesn't matter if the phone is completely shut off and turned on or rebooted.
Puzzled.
Sent from my DROID RAZR HD using xda app-developers app
bweN diorD said:
i didnt see anyone suggest he flash a stock recovery.
he got the phone used, maybe its already unlocked, i didnt see that possibility confirmed or denied.
Click to expand...
Click to collapse
Grns did mention that he might try flashing PhilZ recovery, that's why I said what I did. His OP also mentioned that the previous owner took the latest OTA, so it's highly probably that he's locked up (though, not 100% certain). I'm only suggesting these things in advance, so that he doesn't run into problems.
As for your SS issues, that's kind of weird. You should get the options as soon as the phone boots up.