Database Info

[Q] Clamcase and HP Touchpad

So anyone know if the clamcase for the iPad 1 will fit the HP Touchpad?
http://clamcase.com/clamcase-ipad-keyboard-case-trooper.html
I've included a link to how it looks like.

In theory yes. But I don't know.

I think the TP has a more pronounced curve to the back and with it's bevelled sides (as opposed to the iPads straight ones) I'm not sure any hard case will hold it, but the only way to find out is try it and see.

Isn't the TP thicker?

Colchiro said:
Isn't the TP thicker?
Click to expand...
Click to collapse
Most definitely. Not much, but probably enough to matter in something like that.

I bought a griffin standle (iPad1) to see if it would fit or could be made to fit. The top and bottom halves were a good millimeter apart when the TP was inside and could not be made to meet. The TP is shorter/thinner in height/width as well as deeper so no form fitting hard iPad1 case is going to work.

I think iPad 2 cases will fit it, but not iPad 1? I can't remember. They're very similar in form factor.

No m8, the iPad2 is much thinner.

The TouchPad dimensions are 9.45 x 7.45 x 0.54 in. (240 x 189 x 14 mm) and it weighs 26.10 oz (740 g)
If you get the inside dimensions of the case in question you can tell easily.
Remember, size DOES matter - bigger is ok, smaller is not.

Clamcase with HP Touchpad
Bumping this old thread. Did anyone every find out if the Clamcase for the iPad 1st generation will fit an HP touchpad? I'm looking for a good solid keyboard case w/my HP Touchpad and all the faux leather silicon-based keyboard ones out there suck..
So... WILL THE CLAMCASE (IPAD 1 VERSION) FIT THE HP TOUCHPAD??

NO!

Bump..... has anyone tested this as of yet?

Accessories

This is just a placeholder for accessories

charging/usb connector the same?
does anyone know if the 7.0+ is compatible with original gtab cords and maybe even dock connectors for that matter??
I hear the cases will fit but will be a "little" loose.

I'm curious if the screen protectors are the same or not?

should be close enough, you can always trim it. I have seen screen protectors and anti-glare advertised for 7.0+ on amazon.

http://www.amazon.com/gp/product/B00...00_i00_details
10 bucks with free 2 day shipping if prime. I posted a while ago
Super fast shipping. The case fits perfectly sung and looks really nice.

deolarte said:
http://www.amazon.com/gp/product/B00...00_i00_details
10 bucks with free 2 day shipping if prime. I posted a while ago
Super fast shipping. The case fits perfectly sung and looks really nice.
Click to expand...
Click to collapse
Link didn't work for me?
Sent from my GT-P6210 using Tapatalk

me either, I already ordered one, so I will wait and see. and I just got a skinomi skin for protection from scratches,etc. many cables were advertised as working with 7,8.9,10.1 tabs, so i figured the 7.0+ would be the same.

theundeadelvis said:
Link didn't work for me?
Sent from my GT-P6210 using Tapatalk
Click to expand...
Click to collapse
Sorry, Update, price has dropped.
http://www.amazon.com/gp/product/B004E9SN52/ref=oh_o00_s00_i00_details

I may bite the bullet on this one: http://www.samsung.com/us/mobile/galaxy-tab-accessories/EFC-1E2NBEGSTA
Sent from my GT-P6210 using Tapatalk

chrisrotolo said:
does anyone know if the 7.0+ is compatible with original gtab cords and maybe even dock connectors for that matter??
I hear the cases will fit but will be a "little" loose.
Click to expand...
Click to collapse
I picked up an original Galaxy Tab HDMI Dock for under $15, and it works fine so far. You have to be a little careful inserting the 7plus, since the holder is a little narrow and deep.
So far, it's fine for docking and charging. I still haven't tested the HDMI port, but since it supposedly works with the 10.1, I would imagine it would be the same for the 7plus. Once the cable arrives, I'll confirm.

deolarte said:
Sorry, Update, price has dropped.
http://www.amazon.com/gp/product/B004E9SN52/ref=oh_o00_s00_i00_details
Click to expand...
Click to collapse
got mine on the way...

keyboard
Has anyone seen a keyboard dock that does portrait and landscape and the tablet can lay flat on to make it one piece like the I pad has?

goldy253 said:
Has anyone seen a keyboard dock that does portrait and landscape and the tablet can lay flat on to make it one piece like the I pad has?
Click to expand...
Click to collapse
+1 That's what I am looking for as well.

Rottgrub said:
I picked up an original Galaxy Tab HDMI Dock for under $15, and it works fine so far. You have to be a little careful inserting the 7plus, since the holder is a little narrow and deep.
So far, it's fine for docking and charging. I still haven't tested the HDMI port, but since it supposedly works with the 10.1, I would imagine it would be the same for the 7plus. Once the cable arrives, I'll confirm.
Click to expand...
Click to collapse
Any luck with the HDMI cable? I went and bought an original tab HDMI dock like yours and noticed the tight fit. I felt like it would eventually scratch the tab, plus (see what I did there?) it was a pain to get in. My solution...Dremel. I took shaved off the sides bit by bit until the tab was still supported but no longer squeezed. It works awesome.

Hdmi works great I get 1080p to my 55".

Has it been confirmed that the HDMI part of the original HDMI dock works?

0
Cptnodegard said:
Has it been confirmed that the HDMI part of the original HDMI dock works?
Click to expand...
Click to collapse
It works with my 10.1 and 7 plus. And of course original tab.

deolarte said:
http://www.amazon.com/gp/product/B00...00_i00_details
10 bucks with free 2 day shipping if prime. I posted a while ago
Super fast shipping. The case fits perfectly sung and looks really nice.
Click to expand...
Click to collapse
I have the same sleeve and love it!!!! I did add an anti-glare film and have just ordered a skin to protect the back and sides; this sleeve isn't lined with a soft micro fiber.

Car Mount
Has anybody used the OEM vehicle mount? I had the last one for the original GT and the suction cup & arm were able to be removed from the rest of the mount. This allowed me to use a permanent mount from RAM. Is this the same with this version as well?

Got one and love it! found it a little cheaper on ebay.

Inductive Chargers for the Touchpad

Does anyone know if the Powermat or the Energizer charging platforms will work with the TP? I was in Target this past weekend and noticed that they were clearanced for 75% off retail price. The idea is nice but I don't want to waste $30 if it won't work.

No neither one will work with your TP. I don't think it would even recognise it was on the charger.

Whats wrong with the Touchstone Charger?

jsgraphicart said:
Whats wrong with the Touchstone Charger?
Click to expand...
Click to collapse
Finding one for less than $40.

famewolf said:
Finding one for less than $40.
Click to expand...
Click to collapse
http://www.amazon.com/gp/offer-list...ed/184-8603988-1906743?ie=UTF8&condition=used

jsgraphicart said:
http://www.amazon.com/gp/offer-list...ed/184-8603988-1906743?ie=UTF8&condition=used
Click to expand...
Click to collapse
$29.99 + $5 shipping ($35) Used is worse than $36.99 + FS New at same url unless at the time you originally posted there were better prices on used.

Yea why would you not go with the touchstone

I really like my TouchStone. Not plugging in cables, and having a real "home" for my TouchPad when not in use is great. Plus it works with the HP case, something I also really like.
Sent from my cm_tenderloin using XDA

quarlow said:
I really like my TouchStone. Not plugging in cables, and having a real "home" for my TouchPad when not in use is great. Plus it works with the HP case, something I also really like.
Sent from my cm_tenderloin using XDA
Click to expand...
Click to collapse
Which case are you talking about? I'd love to be able to charge without having to stretch out my case. I hardly use my touchstone because my folio is starting to get loose.
Sent from my Galaxy Nexus using Tapatalk 2

you could turn it horizontally so gravity doesn't mess with it, or lay it down flat, then put touchpad on top

BlackElvis79 said:
Which case are you talking about? I'd love to be able to charge without having to stretch out my case.
Click to expand...
Click to collapse
Pretty much any case as long as it's not too thick (and doesn't have metal between the tp and ts). I have a 'leather' case that works fine sitting on the ts and a tpu form fitting case that also works well. This one is now permanently on the tp and will fit into the leather case but the two together will not allow the tp to charge on the touchstone.

So it seems there are no "3rd party" chargers available?
I want a touchstone, but all the cheap ones are in the US and they don't ship to Australia
In Australia (or anywhere that is willing to ship here) pretty much charges double for the dock ($70?!), and that's not even counting shipping yet.

Slip case recommendations?

I'm thinking I'll dump the folio that I've been using for a slipcase.
The reason is I don't really need or want a stand and I'll probably start using the tab on a mount in my truck anyhoo.
I believe it may be just easier to hold onto the tablet then slip it for protection.
I'd like to find something dawg hair proof (like there is such a thing)
Been scouring Amazon plus I looked at the Fry's near us, but searching just wears me out.
Soooo I turn to the illustrious members of this great forum for perhaps a place to start.
Searched the forums and found a few dated threads.

You mean this kind of case http://www.bodyguardz.com/universal-tablet-sleeve-protection-cases-covers-sleeves-shield.html?dir=asc&order=sort_priority ?

if you are looking for one with some protection. The one I have is great (especially if you have the dock as well).
google "built ny hoodie laptop case" and look for the 7-10" one. Tablet fits in it like a glove and it has some protection on the sides and back (unlike a normal neoprene sleeve)... though it is obviously alot thicker than just neoprene
I managed to find mine at Canada Computers for CAD $4.99 on sale (in black.)
sorry cant post links yet..

aerce said:
You mean this kind of case http://www.bodyguardz.com/universal-tablet-sleeve-protection-cases-covers-sleeves-shield.html?dir=asc&order=sort_priority ?
Click to expand...
Click to collapse
This one is right up my alley!
Thanx for the link aerce...
jehu111 said:
if you are looking for one with some protection. The one I have is great (especially if you have the dock as well).
google "built ny hoodie laptop case" and look for the 7-10" one. Tablet fits in it like a glove and it has some protection on the sides and back (unlike a normal neoprene sleeve)... though it is obviously alot thicker than just neoprene
I managed to find mine at Canada Computers for CAD $4.99 on sale (in black.)
sorry cant post links yet..
Click to expand...
Click to collapse
I'd be very interested in seeing the one you have jehu111.

aerce said:
You mean this kind of case http://www.bodyguardz.com/universal-tablet-sleeve-protection-cases-covers-sleeves-shield.html?dir=asc&order=sort_priority ?
Click to expand...
Click to collapse
Thanks - this is exactly what I was looking for. Ordering one today.
FYI: Amazon has it for $17.60

Serpico. said:
Thanks - this is exactly what I was looking for. Ordering one today.
FYI: Amazon has it for $17.60
Click to expand...
Click to collapse
FYI, that sleeve will not fit with Transformer. If you look at the dimensions of the iPad and Infinity, they are different. That sleeve is for the iPad. Cancel your order.
I bought a HP sleeve before that was on sale for 1$. It fits my iPad but not my Infinity.
This would probably work well if you have the dock.
http://www.amazon.com/CaseCrown-Sue...1490&sr=8-1&keywords=transformer+prime+sleeve

Just got this one in. http://www.amazon.com/gp/product/B006IKHPZO/ref=oh_details_o02_s01_i00 It is padded, semi rigid, and will fold into a stand.

I just got this one (Oops, can't post links yet. Search Amazon for "TSS13505US") and I'm happy with it, especially for $8.99 and free shipping. My Infinity + Dock fit nicely inside and the padding feels quite protective.

I got this HP 10" netbook slip case, someone suggested on here: http://www.amazon.com/HP-WV594AA-10-2-Inch-Sleeve/dp/B003UT7QD2/ref=cm_cmu_pg__header. Works nice. Has a pocket to store cables, chargers, portable stands, and so on. If you go the link, the six pictures on the case on the red desk, are from me. There is a picture of the TF700 in the case, and various stuff in the pocket. Plus, it's only $10

Brenthaven Pro Sleave for Macbook Air. Superb case for Tablet with Dock. I have two one for the TF300 and one for the TF700
It's like it was made for it. Nice thing is, if they have it in stock you can try it at your local Microcenter rather than ordering online without seeing. They have two sizes, the smallest one fits the TF700 and TF300. If you order from Brenthaven's website it comes in multiple colors.
http://www.microcenter.com/product/388478/ProStyle_Sleeve_for_MacBook_Air_11_Midnight

Seeking an easy slip-in car dock with integrated USB jack

I had a nice car dock with my bionic that allowed me to put the phone in on-handed. It held the phone in a landscape format. I would love to find the same for my S4, although the USB on the S4 is at the bottom so that might be difficult. I'll settle for one that can hold the phone in portrait format also. I have seen some nice looking car docks, but they all seem to require a two handed operation in plugging in the cable. I want a one-handed drop-in and flip-clip to secure it against inertia.
Right now, I have jury-rigged a desktop cradle and it works somewhat well, until I drive on a really bumpy road... hence the "inertia" part.
Has anyone seen such a beast?

classified mongoig
have you looked into proclips?

iateshaggy said:
have you looked into proclips?
Click to expand...
Click to collapse
Bingo! Thanks much. This one looks like it might perfectly match my requirements.
Link to yootoob video:
http://www.youtube.com/watch?v=mgPHk6YUN3E

the microusb conector is the worst conector fomat ever

I've had the ProClip, iBolt, Infuse and Craigdocks dock. I like the Craigsdocks best of all. By a long margin, actually.
My review:
http://forum.xda-developers.com/showthread.php?t=2057851
Buy the home or car dock here:
http://www.craigsdocks.com/samsung-galaxy-s3-s4-note-2-3/

CZ Eddie said:
I've had the ProClip, iBolt, Infuse and Craigdocks dock. I like the Craigsdocks best of all.
Click to expand...
Click to collapse
I initially balked at the price, but the craigsdocks are hand made solid aluminum.. I might need to get me that one. It looks solid. Thanks for the tip.
Edit: Look at the videos. Craig is not a vendor. He's a craftsman. These are well worth the price.

CojonesDeToro said:
I initially balked at the price, but the craigsdocks are hand made solid aluminum.. I might need to get me that one. It looks solid. Thanks for the tip.
Edit: Look at the videos. Craig is not a vendor. He's a craftsman. These are well worth the price.
Click to expand...
Click to collapse
Yeah, he seems like a really nice guy too. I've chatted with him by email several times about his product. He's totally enthusiastic about his designs and implementation! And listens to suggestions/ideas as well.
I'm very happy knowing that this one dock is going to work with several future generations of Galaxy products and it's built so tough (aluminum) that it'll never wear out.
Definitely a long-term type of purchase!

I received my craigsdock today and it is exactly as advertised. I am now able to use my otterbox defender case full time. It would not fit even with docks that had removable shims to accommodate larger cases.
I wholeheartedly endorse craig's docks
Sent from my SCH-I545 using Tapatalk 2