Hey guyz here is the guide for flashing the Samsung galaxy R I9103 I have thought to make a thread on it so here it goes
- Run Samsung I9103 Galaxy R Downloader.
- Check these options: Auto Reboot / F.Reset Time.
- Now in case you have only one file in the Firmware package then it is PDA part.
- In case you have three files in the Firmware package then select like this:
Click PDA button and select this file : CODE_I9103xxxxx_CL423654_REV00_user_low_ship.tar.md5
Click PHONE button and select this file: MODEM_I9103xxxxx.tar
Click CSC button and select this file : GT-I9103-MULTI-CSC-Oxxxxx.tar.md5
- Put the phone into download mode: Volume Down + Home + Power.
- Press Volume Up key to enter Download Mode.
- Connect USB cable to Phone and PC.
- After the Downloader detect the phone click Start button.
- Do nothing till all is done and the phone restart.
- Make Full Reset by Code *2767*3855#.
Enjoy flashing and do at your own risk
Disclaimer : I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE AND DO AT YOUR OWN RISK
IF YOU LYK MY WORK THEN KINDLY PRESS THE "THANKU" BUTTON
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RESERVED....
reserved...........
reserved...............
kkrraazzyy said:
Since there is no guide for flashing the Samsung galaxy R I9103 I have thought to make a thread on it so here it goes
Click to expand...
Click to collapse
There is
http://forum.xda-developers.com/showthread.php?t=1406664
Thanks anyway !
Nothing wrong to share.
PS : ur title is wrong too. should be [I9103]
oh haven't seen that one my mistake
kkrraazzyy said:
oh haven't seen that one my mistake
Click to expand...
Click to collapse
Dun worry, ur guide has a couple of infos my doesn't.
I would add them, but i'm lazy to search for the pics to upload
We already have more then one guide about Odin.
Moved to general since we already have a guide. Will leaver this open for a while to see if it's of any more help to anyone
Ok as you wish mod if you want to close the thread then you can close it
really handy. thanks. i was lost when extract one of your 2.3.4 fw from other post and saw 3 files and didnt know what to do.
cheers
nice sharing sir.... kept it up... more sharing..
Related
Dialer Themed in Blue for Galaxy Note
First of all u need to be Rooted and have CWM Recovery installed.
Make a CWM Full Backup before touching anything!!!
Installation:
Download the attached File
Copy the downloaded zip to your internal SD
Bring the phone to CWM Recovery Mode
(Shutdown the Phone, Vol Up + Home + Power)
In Recovery Mode choose: install zip from sdcard
Now choose: choose zip from sdcard
find the copied file * .zip
After flashing reboot your Phone
Here are some Preview Pics:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you like my work, consider pushing my "Thank you Button" as a donation or Use the real Donation Button
thank
donation 9D382205ET0040424
Have changed the icons address book and phone .... you can fix it?
faby71 said:
thank
donation 9D382205ET0040424
Have changed the icons address book and phone .... you can fix it?
Click to expand...
Click to collapse
THX a lot m8!
You got PN
fantastic!!
thanks!!
do u have the ori ICS dialer for sam note... or where can i get it? thanks again!!
Great looking dialer! I have been looking to create a new dialer myself but just not quite there yet with enough knowledge. Can i swap out the tabs at the top of the dailer ( Need English) with the png's from my current Rom (FJ ICS)? If so, could you point me in the right direction? I have a lot of experience creating in photoshop i'm just trying to carry that over into theming.
Not bad, but really unusable after you have used exdialer t9 dialer Can't understand why people still instinct to use original dialer, it's so bad vs good t9 dialer :/
Sent from my GT-N7000 using Tapatalk 2
Hi All,
I've try to help a friend today to install cyanogen Rom on his LG Optimus 3D.
Here is the method I used :
1. I've Rooted it with a all in one tool.
2. I've install the recovery WorkclockMod
3. Install Cyanogen Rom 7.2
Now the phone don't have network. I've try to follow the tutorial on the forum to try to install the KDZ with the software of Marvin(UpTestEx_mod2_marvin.exe) and nothing work. I really don't know what to do. The phone is no detected on the update.
Somebody can help me? Thanks you so much!
try to leave the phone on for a wile. Took quite long time before i got network just a tip
please hit thanks if i helped
Solution
Follow next link:
http://forum.xda-developers.com/showthread.php?t=1473781&page=3
Download the script and install any .kdz!
Perfect now it seems to work It was the local emulation of Lg Network who missing here Great Thanks you so much!
Ok now I've another problem! the LG update never found my phone. He's not detected it . Drivers has been installed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I must say that I'm currently using Cyanogen Mod 7.2 on this phone.
Reminder
Kinoal said:
I must say that I'm currently using Cyanogen Mod 7.2 on this phone.
Click to expand...
Click to collapse
Go to menu "Configuration", "Applications", "Devolpment" and mark option "USB debugging"!
Already done . I've trying to uncheck and Check it again but nothing change
Pull battery out. Connect phone while holding vol up, wait until connected then reinsert battery.
Sent from my LG-P920 using XDA
Tip
Kinoal said:
Already done . I've trying to uncheck and Check it again but nothing change
Click to expand...
Click to collapse
Reinstall all LG drivers!
Wait while and SO (Windows?) must recognize your cell phone!
http://www.sammobile.com/firmwares/
here are the link for samsung firmware
just type your samsung model such as S III mini ->i8190
if u don't noe what your phone model,nevermind it'alright
access to http://www.gsmarena.com/
by there,u could find out any phone model and it's specification easily
ok,back to flashing firmware,below are the requitment for flashing a firmware
1.An android device (of course):victory:
2.a usb cable,u could probably found on in ur phone box
3.a window pc
4.odin
View attachment Odin307.zip
1.extract the odin file
2.launch odin
3.make sure u tick off the re-paritition
4.go to PDA tab
5.click it n find ur downloaded firmware
6.plug in ur device to ur pc(prefer back of ur pc)
7.wait for window searching ur driver and install it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
you could see this when ur installation of driver is done
8.ok,now,click START!
9.wait until it done
10.unplug ur usb cable
11.DONE! Congratulation~
iZylon said:
11.DONE! Congratulation~
Click to expand...
Click to collapse
This is puzzling, you have [Q] on thread header, meaning its a question you wish to ask, yet say its a Guide to downloading Firmware, which is not the case as you are mentioning about Flashing ROMs, which is not fully complete. For not all firmware comes as one package.
so suggest you change the thread header and provide more details to be a Guide, which should include solutions for problems that one could encounter by following it
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
Hello, everybody.
First of all, i would like to thank you for any help you can give me about this.
So...
The situation is:
01)I have a bricked GT-i9100g.
02) I made my own JIG
03) THE PROBLEM: When i put the jig, the phone starts showing the "PHONE ! COMPUTER FIRMWARE UPGRADE ENCOUNTERED AN ISSUE..."
04) BUT ,... My ODIN recognizes that my phone is plugged in ( shows the port in use)
WHat can i do ? Please, help me... I'm from Brazil... there is not a JTAG service here...
God bless ya
Try backing up your phone in boot mode
Hit thanks if I helped you
joaovictorbrumado said:
Hello, everybody.
First of all, i would like to thank you for any help you can give me about this.
So...
The situation is:
01)I have a bricked GT-i9100g.
02) I made my own JIG
03) THE PROBLEM: When i put the jig, the phone starts showing the "PHONE ! COMPUTER FIRMWARE UPGRADE ENCOUNTERED AN ISSUE..."
04) BUT ,... My ODIN recognizes that my phone is plugged in ( shows the port in use)
WHat can i do ? Please, help me... I'm from Brazil... there is not a JTAG service here...
God bless ya
Click to expand...
Click to collapse
when your phone connects to Odin3, just flash the stock i9100G ROM, and you will have recovered , no need for any jtag. Just make sure the ROM is for i9100G
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
=)))
Thank you very much!!!!!!!!! You saved my life!!
Samsung Lock Reset Tool
by
Dawood1208
Finally Something More Easy
One Click Pattern Crack No Root Required - No Usb Debug Needed !!!
One Click Password Reset No Root Required - No Usb Debug Needed !!!
One Click Pin Reset No Root Required - No Usb Debug Needed !!!
All Without User Data Loss
This was test made on Samsung Galaxy y
should work on all samsung models
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Supports
Android 2.x.x (Tested some Models)
Android 4.x.x (Tested Some Models)
How to Work ?
Go to Settings
Select Modem Port
and do job
Test and Report
Note : If exe not works properly just disable your antivirus and open again
Download
New Version Is up !!!
download from first post same link
This ig great news,you r in here,wellcome .
Nice mate!!!
Its worked for I9003 with pattern:laugh:
Passwork and Pin/Gmail done but still display on screen
hoangps said:
Nice mate!!!
Its worked for I9003 with patter :laugh:
Passwork and Pin/Gmail done but still display on screen
Click to expand...
Click to collapse
just enter any password and it will disappear
dawood1208 said:
just enter any password and it will disappear
Click to expand...
Click to collapse
With pattern,it's ok
With pin/password/gmail,type any password,still wrong
Viirus
Thanks for the virus.
wow.. nice share mate :good:
CAUTION: Don't load!
According to VirusTotal, this file is compromised by 31 threats.
Thanks for your malware - why is this file still available here? Reported to xda...
16 percent not responding
16 percent not responding
Benko111 said:
According to VirusTotal, this file is compromised by 31 threats.
Thanks for your malware - why is this file still available here? Reported to xda...
Click to expand...
Click to collapse
Most mods/programs that are used for this kind of thing will give false positives.