Database Info

[Q] SGS Plus i9001- Dual-SIM Adapter not working after flashing broodROM RC2

Hello all,
Yesterday I successfully flashed my Samsung Galaxy S Plus (i9001) to broodROM RC2 (v2.3.6) and everything works fine except one thing – my dual-sim adapter (Hypercard 3G) is not detected anymore and also the SIM-Toolkit application disappeared. It worked perfectly under the stock rom 2.3.4 before. I assume that dual-sim adapters are not supported by this rom. However for me the dual-sim functionality is essential and I don't wont to miss it. Is there any solution available for this problem? Are the stock roms XXKPS and XXKPU (2.3.6) supporting dual-sim adapters? I would of course prefer to keep this rom because it's working really smooth.
Thanks in advance for your helpful hints.
tobukene

Hi, I just discovered similar. In boodRom is not SIM toolkit application (Stk.apk). I just take it from another rom and place into /system/app. Application works and I can send message from my bank application but I can't receive any message. Probably somethink else is missing. I will try with another phone/rom. I need SIM toolkit for access to my bank account ;(
K.
EDIT: So it works. There was some delivery delay and also GO launcher didn't display message. In this state it's acceptable for me.

send a pm to broodplank1337 , the dev of the broodROM .. cos i dont think he reads here.. or get over 10 post and make a post in the broodROM section (under > galaxy 9001 development)

Hi,
thanks for your reply.
In the meantime I flashed the cranium 8 rom which also works fine. The stock Sim-Toolkit of the hypercard 3G still doesn't work, but the MultiSim app from the market works satisfying. So – for me the problem is solved and there is no urgent need to go back to the broodROM anymore - even if your solution works.
By the way – I tried out the MultiSim app also under BroodRom RC2 before – it didn't work, resp. it didn't detect the second SIM.

need sim toolkit on i9001 broodrom
kaarl said:
Hi, I just discovered similar. In boodRom is not SIM toolkit application (Stk.apk). I just take it from another rom and place into /system/app. Application works and I can send message from my bank application but I can't receive any message. Probably somethink else is missing. I will try with another phone/rom. I need SIM toolkit for access to my bank account ;(
K.
EDIT: So it works. There was some delivery delay and also GO launcher didn't display message. In this state it's acceptable for me.
Click to expand...
Click to collapse
Hello, can you please tell me step by step, how did you install sim toolkit and made it work on broodrom, and send me the files.
Thank you very much

alexandrumit said:
Hello, can you please tell me step by step, how did you install sim toolkit and made it work on broodrom, and send me the files.
Thank you very much
Click to expand...
Click to collapse
Hi, broodrom is rooted so just copy Stk.apk from attachment on SD card. After that use some file manager which can access system folders and move it into folder /system/app. Now I'm not sure if I set permissions but all files in this folder has 644. Reboot phone (maybe not needed).
If you are not familiar with linux use X-plore file manager. There is SD card under "/sdcard (sdcard)" and target folder under "/ (Root)". Before copy/move file you must go into Configuration and permit Root access.
If you have still problem with that send me PM.

[AOKP] Cellular Data Not Working

Hey there, first post and the search function wasn't working so if this problem has been posted elsewhere just let me know.
I just flashed the Sept. 28 AOKP for the A2 along with 4.3 GAPPs and everything seems to be working swimmingly...
Except the mobile data.
I've enabled and disabled data, enabled and disabled airplane mode. Reflashed the firmware and GAPPs and still the data doesn't seem to want to work. I'm getting 5 full bars and for whatever reason it just won't connect.
Anybody else had issues like this?

sammanzhi said:
Hey there, first post and the search function wasn't working so if this problem has been posted elsewhere just let me know.
I just flashed the Sept. 28 AOKP for the A2 along with 4.3 GAPPs and everything seems to be working swimmingly...
Except the mobile data.
I've enabled and disabled data, enabled and disabled airplane mode. Reflashed the firmware and GAPPs and still the data doesn't seem to want to work. I'm getting 5 full bars and for whatever reason it just won't connect.
Anybody else had issues like this?
Click to expand...
Click to collapse
You have to manually put in the APN 's for the ROM
Goto system settings mobile networks Access Point Names and manually input the settings depending upon your carrier the setting will differ...
Google your carrier specific APN settings and input them it should do the trick....:laugh:

darth_nihar said:
You have to manually put in the APN 's for the ROM
Goto system settings mobile networks Access Point Names and manually input the settings depending upon your carrier the setting will differ...
Google your carrier specific APN settings and input them it should do the trick....:laugh:
Click to expand...
Click to collapse
You are the best! Post won't let me change title to solved just yet, but for all intents and purposes my data problem is fixed! :laugh:

sammanzhi said:
You are the best! Post won't let me change title to solved just yet, but for all intents and purposes my data problem is fixed! :laugh:
Click to expand...
Click to collapse
Glad to help a fellow A2 owner ........:laugh:

[Q] [ROM][WIP][NAND] Omni - 25.10.2014 - WiFi Error

Hello to everyone,
volk204 has released this sensational rom for the remaining BADA-Users among us. Thank you for your support - this keeps the Samsung Wave S8500 alive.
I'm following this development for a long time, but this time it seems I need some additional help. I installed everything correctly - read all the available posts until now, but haven't found a solution for the WiFi Problem.
What's not working? After setting up all options like e.g. ("wireless&network" category -> Mobile Network -> Preferred Network type -> 3G only), the Wifi is still not connecting. I tried to wipe the cache, reset the phone to standard settings, re-flashed it. With or without sd-card no success .
Would it be possible that my network operator has something to do with it? I mean I still use a smartphone with no internet usage (except WIFI) - so there is no broadband package included.
Maybe someone is able to help me out
thanks in advance

WIFI error +1
Hello
I also encountered the same problem
I hope there is a solution
My English ability is very bad
These are used google translate

Q] [ROM][WIP][NAND] Omni 4.4 - 11.12.2014
Hello to the Forum
I am new on the Forum i do not know exactly how it works Please excuse me
I have a SAMSUNG 8500 with Bada
I would like to suppress Bada and replace it with ANDROID
I Tried the procedure listed in the Topic ROM][WIP][NAND] Omni 4.4 - 11.12.2014
i could Flash Bootfiles Startkernel and FOTA with Multiloader
i do not understand the following and I do not want to have my Phone Bricked ! - -
Do I have to proceed the Android recovery immediately after that step Before loading the SDCard ?
ROM means the Android File ? Where can I get this ROM ?
What Does it mean > choose zip with ROM ?
Do you have to set the Phone in - DOWN LOAD MODE to make tis procedure ? vol low -+ camera + power
Thank you in advance for your Help - Georges
Multi-quote
Reply
Edit

[ROM][WIP][NAND] Omni 4.4 - 11.12.2014
Hello Dukekox
Sorry I cannot Help you for your WiFi Problem but Perhaps you will accept to spend a few minutes to Help me since you succeeded to install Android on your Wave S 8500
I am new on the Forum and not an expert in Flashing ROMS
I have a SAMSUNG 8500 with Bada I would like to suppress Bada and replace it with ANDROID
I Tried the procedure listed in the Topic by Volk ROM][WIP][NAND] Omni 4.4 - 11.12.2014
i could Download Bootfiles ( I have unzipped is it the right thing to do ? ) Startkernel and FOTA i have also Multi loader V5.67
i do not understand the following and I do not want to have my Phone Bricked ! - -
What happens after the Android recovery and see on the screen " Partitions had been prepared" ? Bada is stil in use ? You still can Boot on Bada ?
ROM means the Android File ? Where can I download this ROM ?
I copy the ROM on the Root of SD Card - OK
How do you do for the the Action Install ? Open the Folders in the Phone - SD Card - find the File of ROM an click on it - It opens Install ?
Do you have to set the Phone in - DOWN LOAD MODE ? vol low -+ camera + power
More personnal Questions - Which ROM did you actually install ? KitKat 4.4.4 ? Gingerbread ? Cyanogen mod ?
Too bad if you cannot have the Wifi - You can however have the applications on Playstore ?
Does it suppress Bada ? - Is it possible to reinstall Bada ?
Many Thanks in advance for your Help - Georges
dukekox said:
Hello to everyone,
volk204 has released this sensational rom for the remaining BADA-Users among us. Thank you for your support - this keeps the Samsung Wave S8500 alive.
I'm following this development for a long time, but this time it seems I need some additional help. I installed everything correctly - read all the available posts until now, but haven't found a solution for the WiFi Problem.
What's not working? After setting up all options like e.g. ("wireless&network" category -> Mobile Network -> Preferred Network type -> 3G only), the Wifi is still not connecting. I tried to wipe the cache, reset the phone to standard settings, re-flashed it. With or without sd-card no success .
Would it be possible that my network operator has something to do with it? I mean I still use a smartphone with no internet usage (except WIFI) - so there is no broadband package included.
Maybe someone is able to help me out
thanks in advance
Click to expand...
Click to collapse

[Q] [Lenovo] [MT6572] No signal , formated nvram!

Hello xda
first, i searched the forum and other sources for solution and didn't found any help
-My phone is Lenovo A319 dual sim
-i download the latest stock firmware for it from 4PDA
-then before flash i select the scatter in sp flash tool and did format all except bootloader.
-then flashed the firmware and everything done well.
-after powering on my phone with sim card it didn't recognize it (Both sim 1 and sim 2) - no imei - no serial number - baseband is ok.
-i fixed all of this and after some tries the phone recognize both sim(s) but just 1 bar signal in sim 2 (2G) out of 5
-and sim 1 keep doing searching and no service and randomly get network (G) and sometimes (3G) but can't make calls, ussid ... etc
*Things i have tried*
1-fixed imei with SN & IMEI Writer. (Done!.)
2-fixed SN with Maui META 3g and ini config file that i have found on the internet that supposed to fix 3g but it only fix SN:nullnull to SNNxxxxxxxxxx (where x is some letters and numbers). (Done!.)
3-flashed another secro.bin from another MT6572 device(original secro.bin from stock firmware a319 flashed already). (No Luck with network)
4-changed TX settings in RF Tool in Maui META 3g [ GSM900=TX:-13 - 1800=TX:-10].(No Luck with network)
5-some other playing in Eng. Menu (*#*#3646633#*#*).(No Luck with network)
Notice:
-firmware i have downloaded has a folder Called "APDB" that contains database files for my device and a file called "catcher_filter_1_wg_n.bin".
-firmware dosn't have nvram.img.
-i have no backup.
-i'm sure that is the problem can be solved by changing band settings in Maui META 3g in RF Tool but i have no idea how to accomplish such thing.
-i guess the problem i because the firmware is Russian and my phone work in Egypt so the band settings is vary from here to there.
i hope i can get some help, and sorry for my bad english
BR.

i found a stock rom for lenovo a319 that sim works with my sim perfectly.
now i want to move from stock to CM12.1.
cm12.1 has the same issue because of modem things.
-how can i change modem from the stock i have to work with Russian unofficial CM?
Update
after flashing cm 12.1 the signal gone again, when i try go back to it no signal too :\

bump!
iguess The Problem is in RF Data but i have no idea how to set it correctly
any help?

please tell me where you find the solution for sn repair, please pm it to me
privatezs said:
Hello xda
first, i searched the forum and other sources for solution and didn't found any help
-My phone is Lenovo A319 dual sim
-i download the latest stock firmware for it from 4PDA
-then before flash i select the scatter in sp flash tool and did format all except bootloader.
-then flashed the firmware and everything done well.
-after powering on my phone with sim card it didn't recognize it (Both sim 1 and sim 2) - no imei - no serial number - baseband is ok.
-i fixed all of this and after some tries the phone recognize both sim(s) but just 1 bar signal in sim 2 (2G) out of 5
-and sim 1 keep doing searching and no service and randomly get network (G) and sometimes (3G) but can't make calls, ussid ... etc
*Things i have tried*
1-fixed imei with SN & IMEI Writer. (Done!.)
2-fixed SN with Maui META 3g and ini config file that i have found on the internet that supposed to fix 3g but it only fix SN:nullnull to SNNxxxxxxxxxx (where x is some letters and numbers). (Done!.)
3-flashed another secro.bin from another MT6572 device(original secro.bin from stock firmware a319 flashed already). (No Luck with network)
4-changed TX settings in RF Tool in Maui META 3g [ GSM900=TX:-13 - 1800=TX:-10].(No Luck with network)
5-some other playing in Eng. Menu (*#*#3646633#*#*).(No Luck with network)
Notice:
-firmware i have downloaded has a folder Called "APDB" that contains database files for my device and a file called "catcher_filter_1_wg_n.bin".
-firmware dosn't have nvram.img.
-i have no backup.
-i'm sure that is the problem can be solved by changing band settings in Maui META 3g in RF Tool but i have no idea how to accomplish such thing.
-i guess the problem i because the firmware is Russian and my phone work in Egypt so the band settings is vary from here to there.
i hope i can get some help, and sorry for my bad english
BR.
Click to expand...
Click to collapse
please provide a link it would be helpful

Any solution? Since my Lenovo A319 has the same problem. Sometimes no network, EDGE, 3G or even H+. Hopefully someone already have the solution.
I'm in Indonesia, already using A319_ROW_DS_S318_150615 with Baseband Version MOLY_WR8_W1315_MD_WG_MP_V43_P2_2015/01/13

AbuIgras said:
Any solution? Since my Lenovo A319 has the same problem. Sometimes no network, EDGE, 3G or even H+. Hopefully someone already have the solution.
I'm in Indonesia, already using A319_ROW_DS_S318_150615 with Baseband Version MOLY_WR8_W1315_MD_WG_MP_V43_P2_2015/01/13
Click to expand...
Click to collapse
hello
iam not an expert but i had some problems the same way with 3g and gsm by seeking some infos in this fourms and others
i found that u can easly extract ur device modem data base by the following command "under adb "
" adb pull /etc/mddb C:/adb " notice that c:\adb is going to be the extraction destination
so u v just got ur own modem database
easly i guess u can extract similar working device modem and just go to Maui META v 9.1604.02.00 then load it there and apply it to ur own device by selecting Rf and then 3g settings also change ur imei to ur original ones
---------------
i hope that i'am saying a good and useful stuff or some one can correct the mistakes 4 me
** sorry that i was here for long time just learning without trying to give or share i hope that one day i will have some info to share..

dial *#06#.. if you got invalid imei, then...write down your both imei (you can see at the back of your phone) download and install chamelephon, open and write down both imei. apply and restart your device. enjoy

Question (Solved) Problem with WiFi Analyzer (open-source) app [dont work]

Hello, the problem is with that app, before android 13 it worked well, but since it was updated (december 2022) i have not been able to make it work.
I tried the developer mode, location and stays loading, it just says no data and i trying other wifi analyzers, and get the same problem.
I hope someone can tell me how to make it work on android 13, since i occupy it for work and if not i return to android 12.
Sorry for my bad english and thank you.
WiFi Analyzer (open-source) - Apps on Google Play
Optimize your WiFi network using WiFi Analyzer (open-source)
play.google.com

Write to VREM Software Development about it.

Works on my 12 pro Miui 14 A13.(not root).
Xiaomi EU rom V14.0.23.2.13.DEV

NOSS8 said:
Works on my 12 pro Miui 14 A13.(not root).
Xiaomi EU rom V14.0.23.2.13.DEV
Click to expand...
Click to collapse
I will wait for the next update to see if it is solved or if it does not report the problem, because it is not only with that app, but with those of its type.

darkevangelion said:
I will wait for the next update to see if it is solved or if it does not report the problem, because it is not only with that app, but with those of its type.
Click to expand...
Click to collapse
What rom are you using?

NOSS8 said:
What rom are you using?
Click to expand...
Click to collapse
miui stable rom
xiaomi.eu_multi_XM12_V14.0.4.0.TLCCNXM_v14-13.zip
before that this...
xiaomi.eu_multi_XM12_V14.0.2.0.TLCCNXM_v14-13-fastboot.zip
this rom release the 24-12-2022 is when the problem started, i did a clean installation.
and before this...
xiaomi.eu_multi_XM12_V13.0.41.0.SLCCNXM_v13-12.zip <---with this and the previous ones it worked.
I already tried similar apps thinking it was just that app, but even Fing has some details with the channels.

Try to:
Uninstall the app, reinstalled there, do not open it.
Long press on the icon/info:
Batterie without restriction
Authorizations to grant everything.
Try.

NOSS8 said:
Try to:
Uninstall the app, reinstalled there, do not open it.
Long press on the icon/info:
Batterie without restriction
Authorizations to grant everything.
Try.
Click to expand...
Click to collapse
Nothing, the error continues, I also already disabled the option they suggest in developer mode.

wait for a Xiaomi 12 user to test or rom update.

NOSS8 said:
wait for a Xiaomi 12 user to test or rom update.
Click to expand...
Click to collapse
Yep, thanks i hope in the next update is solved or some user to confirm the problem.
a question taking advantage of which is the latest mtp driver in windows 11?

I only have drivers from 2006 and 90% of them are Xiaomi.
W11 22H2 22621.1265.

Currently I solved this, you have to activate an experimental option in the privacy protection tab.
Settings --> Privacy protection --> Protection tab --> Privacy protection lab --> enable --->Approximate location
I found it on the Xiaomi.eu forum for another model.