I use Screeble all the time. And every once and a while i notice that it stops working. Reinstalled it... no help. Then i installed an app that shows the readings of the sensors. That showed the sensors are not working for some reason. In the past i would just restore from a backup but this time it didnt work. Anyone else have this problem?
L8R,ERIC
Sent from my ICS NexusS4G.
Do your photos rotate when you turn the phone sideways? If they do its not the sensors.
Related
My nexus s' proximity sensors have stopped working. I am rooted and running aokpcb rom, I'm wondering if this is a hardware problem or something with the rom? The screen won't turn off when answering / making a call when the phone is brought up to my ear. I also tried using the app prox pro, and that wouldn't work either. If anyone knows a fix or what the problem is, that would be great.
Backup your current ROM , wipe and install a Stock ROM.
Issue solved --> Rom Issue
Issue unsolved --> hardware issue
Thank you for your response. I tried your suggestion, and the problem wasnt fixed with wiping and installing a stock rom. But, with experimentation, I installed the app "Prox Pro" and whenever I would turn it on, it would execute the command that was specified for when the phone was "flat". So, when realising this, I am assuming that my phone developed some sort of calibration problem with the sensors. All in all, I am wondering if there is a way that I can re-calibrate my proximity sensor so that they work properly. Thank you.
Could that just be the default for the phone if it's not getting a reading?
I don't think its the default. The sensors always worked fine up until sometime last week.
I meant a default if there is no signal or an error, which is what it currently looks like.
Oh, okay, ya that could be it. Do you have any idea how to change it? I also realised that the light sensor isn't working either, when on auto brightness, the screen will always be dim, no matter how bright it is outside. If you, or anyone else has a solution, I will open up my phone and check to see if there are any connection issues or something like that .
Hi,
Since last week my camera didn't work well anymore. I used to have no problems but since somewhere last week, my camera would crash my whole phone upon starting. This was with ARHD 6.6.4. Then I flashed 6.6.7, and the problem was still present. So I cleared cache and app data, and still, no working camera.
Yesterday I flashed OrDroid 9.0.0, hoping this would clear the problem, but it didn't. When I click the camera-app (camcorder as well) my phone hangs, and about a minute later reboots itself. When clicking main camera in Z-devicetest the same happens. Using the mirror-app, my phone keeps working and gives a clear image from the front camera.
Any advices?
Well, today my camera worked several times... But I cannot get it running again. I tried lots of different things, wifi on/off, airplane mode on/off, bt on/off, full battery, on wall charger...
I'm afraid it might be a hardware malfunction. Can anybody give some advice?
I used to have a camera problem it used to crash when I opened it. Someone told me to uncheck face detection on the camera settings and it worked. You can try that
Sent from my HTC Sensation XE with Beats Audio using XDA
I don't think it's a Rom issue, did you uncheck face detection ? If it's the Rom that should do the trick. I'm running ordroid 9.0.0 and I have no problems with the camera. Make sure you uncheck face detection, if it's still giving you trouble it could be a different issue. Check your settings. Could be a problem in settings. This is known to happen if face detection is on. So uncheck it and let us know if that did the trick. Hope this helps. Best wishes!
Sent from my HTC Sensation 4G using xda premium
Well, I thought I found it, but it wasn't the battery. When the batt is full, or nearly full, I haven't had any problems, but when ~<80% my phone just crashes and hangs or reboots...
I did uncheck face recognition and geotagging when it worked, but this hasn't fixed anything.
Are you on a custom kernel or not? I have experienced flashing different roms affects the camera as well.
Bump
Same issue on several different ROMS (Sense and Senseless). Camera will work for a while then freeze and crash to the home screen OR occasionally crash and reboot. This also happens with other camera apps, not just the stock app. If I don't find a solution soon I am going back to the stock ROM.
adrockr said:
Same issue on several different ROMS (Sense and Senseless). Camera will work for a while then freeze and crash to the home screen OR occasionally crash and reboot. This also happens with other camera apps, not just the stock app. If I don't find a solution soon I am going back to the stock ROM.
Click to expand...
Click to collapse
Just as sudden as the problems appeared, they disappeared... The camera functioned for about 2/3 weeks without any problems, but now last week, all of a sudden, it started crashing my phone again whenever I start the camera app...
I have a problem. My wife uses screebl on her NS4G and for some reason it's not working now. What screebl does is it detects if the device is laying flat or being held vertically.
I used a sensor monitor app to see what's up. It appears the gyroscope isn't working. The compass isn't working either but I think that is cause of the gyro.
What's funny is it still goes from portrait / landscape modes ok.
Any ideas on what I can do to fix this?
She is running BLACK ICE 40.5 matrix kernel.
Ok. I did a full wipe and everything is working again. Don't know what happened but it's fixed now.
Hi all, I just noticed that my auto rotate isn't working anymore. I was using a custom rom, but reverted back to stock just to make sure everything would be alright, but it still isn't working on my stock rom. I downloaded "Phone Tester" from the app store, and when I check to see if it's working, it says that my device has no accelerator, compass, light sensor, etc...
What's going on here? It was working fine a couple of days ago.
Edit, when I go to the Phone Tester app, it says that I don't have:
- Accelerometer
- Compass
- Magnetic Field Sensor
- Proximity Sensor
- Light Sensor
- Gyroscope
- Pressure Sensor
- Humidity Sensor
bump
Having your same issue. It worked once when I flashed a new rom but then I rebooted and it stopped working. I went back to stock but that didn't help either.
neriamarillo said:
Having your same issue. It worked once when I flashed a new rom but then I rebooted and it stopped working. I went back to stock but that didn't help either.
Click to expand...
Click to collapse
If you flashed the factory image and it's still not working then it's most likely a hardware issue.
I remember soon after the N5 was launched there was a barometer app that was crashing all of the sensors. Maybe this is still an issue?
El Daddy said:
I remember soon after the N5 was launched there was a barometer app that was crashing all of the sensors. Maybe this is still an issue?
Click to expand...
Click to collapse
I have barometer installed and working since day 1 I bought the phone.. I would assume the OP problem is an isolated issue that somehow crashed all the sensors.
Most possibility is factory hardware defect.. or .. somehow the phone was at affected by strong magnatic/radiation field area that caused those sensors broken.
Having the same issue.
So I figured something out today. I flashed the stock image for 4.4, (not 4.4.2 like i had previously), and everything works perfectly fine! Now if I take the OTA for 4.4.2 it stops working once again. So now I have no idea what to do lol since I know its not necessarily a hardware issue but more of a software issue. Another thing is while on 4.4.2 if I open GPS Status & Toolbox app to check the GPS or sensors the phone soft reboots but the app never opens.
This is definitively a software issue somewhere. Its been working perfectly fine all day on stock 4.4
I will try and see if I can find what's changing or getting updated when you do the update to 4.4.2.
Is anyone facing an issue with the Gyroscope?
Every day I have to restart the device to make it work. After playing BGMI at night when I open BGMI the next morning the GYROSCOPE doesn't work properly(it behaves like I am recording video with OIS). The Compass also doesn't work. After a restart GYROSCOPE works properly. But next morning same issue again. Performed factory reset still the issue is there.