i never used custom kernels before but overclocking to 1.5ghz is awesome. one downfall, phone gets super hot and my phone restarts. i've heard of undervolting but i have no clue on how to set it using setcpu. i've heard 1.5ghz to be something like -100mv but do i set -100mv to all of the frequencies?
marine417 said:
i never used custom kernels before but overclocking to 1.5ghz is awesome. one downfall, phone gets super hot and my phone restarts. i've heard of undervolting but i have no clue on how to set it using setcpu. i've heard 1.5ghz to be something like -100mv but do i set -100mv to all of the frequencies?
Click to expand...
Click to collapse
What do you need the phone to do if you want it to be constantly at 1.5ghz?
You can try using Faux's or Trinity kernel. Both have versions that are already UV'd upon flash. Although some chips can't handle UV. Also, I believe you have to use a different app to control your voltage.
When i play games or watch movies i set it up to 1.5ghz and since school is out and no job... im kinda on my phone for a few hours. Also, i tend to forget to turn it down.
Oh yea my bad, its cpu master. I tried -100mv to all frequencies and it'll work for like a minute then it'll freeze and have to pull out the batt.
I'll check out those other kernels but this one has really fast boot. Although, which of the other kernels gets updated the most?
Sent from my LG-P999 using XDA App
marine417 said:
When i play games or watch movies i set it up to 1.5ghz and since school is out and no job... im kinda on my phone for a few hours. Also, i tend to forget to turn it down.
Oh yea my bad, its cpu master. I tried -100mv to all frequencies and it'll work for like a minute then it'll freeze and have to pull out the batt.
I'll check out those other kernels but this one has really fast boot. Although, which of the other kernels gets updated the most?
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Faux boots up in less than 30 seconds for me so give that a shot. Both Faux and Trinity get's updated very often. So you can't go wrong with either.
marine417 said:
When i play games or watch movies i set it up to 1.5ghz and since school is out and no job... im kinda on my phone for a few hours. Also, i tend to forget to turn it down.
Oh yea my bad, its cpu master. I tried -100mv to all frequencies and it'll work for like a minute then it'll freeze and have to pull out the batt.
I'll check out those other kernels but this one has really fast boot. Although, which of the other kernels gets updated the most?
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
I play games like dead space and Nova at 1.2 and have no lag whatsoever, basically they only time overclocking to 1.5 does anything is when you're running some type of performance test.
Sent from my LG-P999 using xda premium
mackster248 said:
Faux boots up in less than 30 seconds for me so give that a shot. Both Faux and Trinity get's updated very often. So you can't go wrong with either.
Click to expand...
Click to collapse
95Z28 said:
I play games like dead space and Nova at 1.2 and have no lag whatsoever, basically they only time overclocking to 1.5 does anything is when you're running some type of performance test.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
aaahh yea im starting to c wat u mean. keeping it 1.1 and its still good. got used to the old phones under 1ghz and single core.
oh, do guys have to links to the kernels? im trying to find it but its usually part of a rom.
Go in the development section and look for [kernel] in the titles and not ones that say [rom].
Related
So I found a kernel on the Fascinate forums that was built off of our EC10 froyo source that was from nemesis2all and I saw that he had added the ability to overclock and undervolt from within the ROM so I installed it just trying (backed up of course) and found that it does indeed work.
I then got the Voltage control app from the market and started playing around doing Quadrant scores throughout after each change. I found that at 1200 mhz I was getting 1600s instead of 1400s and the phone ran great. But when I tried 1400 mhz the phone froze up and restarted while doing the CPU section of the Quadrant test so I reverted back.
My question is, what would be safe to stay at for general use?
Second question, how do you use the voltage app to undervolt I see the settings but I don't know what to set them too.
Here is the link to the kernel
1200 has proven to be the most stable overclock, any higher and it will freeze up eventually.
With voltage control, the way it works is that you set the max clock and then it will give you increments that the phone will automatically clock to within the guidelines you give it. Then for each increment you can set the voltage it will use. Just look around and experiment with voltages, see how low you can go without having issues and never set it to apply at boot unless you know that's what you want, other than that go crazy and a reboot will fix it if you have a problem.
I recommend keeping setCPU installed along with it, that way you can still force it to underclock or overclock or whatever. It all depends on how much you use the phone and what for.
Sent from my MIUI SCH-i500
Thanks sage I'm glad someone who knows what their talking about replied lol.
Swyped using USCC Mesmerize
I've been running overclocked at 1.3 and undervolted at least 50 for a couple days now. Only one issue and I'm not even sure it was related as it janet happened again. I posted my settings in the otb thread if you're curious.
Sent from my SCH-I500 using XDA App
akellar said:
I've been running overclocked at 1.3 and undervolted at least 50 for a couple days now. Only one issue and I'm not even sure it was related as it janet happened again. I posted my settings in the otb thread if you're curious.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
H'm, I tried going up to 1.3 and it would freeze up after 5 or 10 minutes every time.
Like I said, 1.2 is the only one that has proven to be safe for everybody... not each phone is exactly the same and if akellars CPU has a soldering that is done a little bit different than mine, it might allow him to clock a little higher. who knows
Sent from my MIUI SCH-i500
I've been running it for a week @ 1400 -25 undervolted and haven't had any issues. The new 1.6 gives me trouble. I don't think there's enough overvolting in that one to make it stable for pretty much anyone. I use the 1400, 800, 400, 200 steps all undervolted @50 except 1400 which as mentioned is -25. Battery life is good because during sleep it doesnt really hit the high end and by not having the other steps its snappy when in use. Fastest this phone has been by far. I don't use setcpu because I think it and the voltage app conflict. That was nemisis's instruction to install it.
Sent from my SCH-I500 using XDA App
sageDieu said:
H'm, I tried going up to 1.3 and it would freeze up after 5 or 10 minutes every time.
Like I said, 1.2 is the only one that has proven to be safe for everybody... not each phone is exactly the same and if akellars CPU has a soldering that is done a little bit different than mine, it might allow him to clock a little higher. who knows
Sent from my MIUI SCH-i500
Click to expand...
Click to collapse
Yup I'm just lucky 1.4 worked for me too but I didn't see much of a performance difference so I didn't see the need to stress the cpu out anymore than I already was. battery life had been awesome for me with my setup as well.
Sent from my SCH-I500 using XDA App
SetCPU master coolbho3000 has updated his app to include support for the Tegra 2. It's available at all the familiar places.
2.2.0 - Added an "In Call" profile. Improved the Set on Boot safemode function by including a flashable zip that toggles SetCPU's safemode. Press menu on the main tab for more details. Added autodetect support for all Tegra 2 fakeShmoo kernels (ie. G2x). Added a "Voltage" tab for undervolting the CPU on fakeShmoo kernels, some custom Galaxy S kernels, and some Nexus S kernels. This is a full-fledged interface for undervolting these devices, and includes backing up and restoring and a Set on Boot checkbox. Improved the way SetCPU initially requests root. Various miscellaneous bugfixes.
Undervolting in SetCPU, now that's fantastic. By far the best purchase I've made on the market.
GideonX said:
Undervolting in SetCPU, now that's fantastic. By far the best purchase I've made on the market.
Click to expand...
Click to collapse
Also has a cool feature that allows you to extract a zip file to your sdcard in case you've set it to 1.5/1.5 and your phone freaks out. You can just boot into recovery, flash the zip and it resets setcpu.
I must say, SetCPU 2.20 is quite amazing... worth every penny
Note to ppl who upgraded from existing setcpu...re-detect your cpu speeds from the main screen. Otherwise, voltage tab will force close on you.
What would you set "in-call" to?
mmapcpro said:
What would you set "in-call" to?
Click to expand...
Click to collapse
I have 400/400 for screen off. I set in call to slightly higher at 400/500.
I'll need to test it tomorrow during calls and see if the screen wakes up quicker after a call ends.
For benching, I set it at 1500/1500 at 1300mV with no profile set for maximum power, and I'm getting much lower benchmarks in Smartbench 2011, than I was with pimpmycpu. Why do you think that would be?
pimpmycpu: 4400-4700
setcpu: 3700-4000
Wow very nice.
yes nice news ! Im happy to see old school
Great news. Just re-downloaded this and uninstalled pimp my cpu.
Sent from my LG-P999
Epiccccc. Bye bye pimp my CPU.
I love setcpu profiles
Sent from my LG-P999 using Tapatalk
I'm so pissed off by this. I legit bought cpu master at like noon on the 20th. Then I come home from work too setcpu being updated. dammit I want my two dollars back, I'm broke enough, and that could be bus money lol.
Sent from my LG-P999 using XDA Premium App
McFroger3 said:
I'm so pissed off by this. I legit bought cpu master at like noon on the 20th. Then I come home from work too setcpu being updated. dammit I want my two dollars back, I'm broke enough, and that could be bus money lol.
Sent from my LG-P999 using XDA Premium App
Click to expand...
Click to collapse
womp womp. Broke but have a G2x! legit! lol. theres nothing that can come inbetween a man and his phone and car lol!
I didn't pay anything for the phone lol.
Sent from my LG-P999 using XDA Premium App
New setcpu is working like a champ. OP, thanks for bringing this to our attention.
Sent from my LG-P999 using XDA Premium App
diablos991 said:
Great news. Just re-downloaded this and uninstalled pimp my cpu.
Sent from my LG-P999
Click to expand...
Click to collapse
I did the same, but unfroze SETCPU and FROZE pimpmycpu.
In the transition, the battery got drained quite a bit over a few minutes, and heated up pretty fast when initially recharging. I had rebooted in between, but there may still have been some residual conflicts between the apps.
It froze at one point, but after a battery pull, it settled down. Overnight battery drain (with screen-off profile set pretty low) was only 4% over 8 hours. This is on EB 1.0.2 and faux stock kernel. Quadrent "only" around 4000, but everything works and this has apparently improved battery life.
A note on pimpmycpu - I thought scaling to min had stuck, but apparently not. Battery consumption was 12-15 % overnight compared to the above.
Thanks OP! I severely dislike pimpmycpu...
Sent from my LG-P999 using Tapatalk
So am I the only one that is getting significantly lower smartbench 2011 results with this updated setcpu as opposed to pimpmycpu?
mmapcpro said:
So am I the only one that is getting significantly lower smartbench 2011 results with this updated setcpu as opposed to pimpmycpu?
Click to expand...
Click to collapse
I have not seen that, although compared to Quadrent, I had not seen the very high scores that some had. I doubt SETCPU would impact you OC'd performance at max setting (although pimp had scheduler settings and SETCPU does not).
Hi.
I a speed freak! If there is something I hate, is lag.
I therefore thought of using a better kernel for my G2x.
As I understand, some kernels can OC the cpu. Wow. That's cool, first of all.
Second - any conclusions about this? Is it safe? Does it really make a difference (i don't game on my G2x)?
THANKS!
Since you obviously don't know how to use the search function, I'll just tell you that it is perfectly safe to install a kernel and constantly run it at 1.5 Gh.
Go buy setcpu from the market to set your processor speed at Max, and leave it there. All the time. No matter what.
Beekersguy said:
Since you obviously don't know how to use the search function, I'll just tell you that it is perfectly safe to install a kernel and constantly run it at 1.5 Gh.
Go buy setcpu from the market to set your processor speed at Max, and leave it there. All the time. No matter what.
Click to expand...
Click to collapse
Haha, good answer..Or you can go and download CPU master for free. =)... But honestly overclocking is not good
There's no real speed difference when overclocking install a custom kernel but don't overclocking it its a waste of battery
Sent from my LG-P999 using XDA App
risks? yes. it kills your battery faster, and battery life will drop. by battery life, i mean the amount of recharge/discharge cycles it normally will allow will drop.
pros? makes your phone much faster. and no its not a placebo. if you bump up your kernel from 1ghz to 1.5ghz, thats obviously a speed increase. how can it not be faster.
Sent from my LG-P999 using xda premium
But also the risk at a constant 1.5 of overheating and burn out of the processor.
if you're a noob and don't know exactly what OC is, don't do that.
it can kill your battery and processor much faster, make you're phone unstable and accidentally overheat and burn out your processor, if you have a constant OC
processor life is worth the wait imo
I oc mine tops 1.2 and its as fast as it needs to be for my needs. I also bump up the minimal speed to about 500-800 cuz our g2x's should never be running that slow even when idle/screen off imo.
Sent from my LG-P999 using xda premium
Just saying setcpu is free on XDA
Sent from my G2X
GTWalling said:
But also the risk at a constant 1.5 of overheating and burn out of the processor.
Click to expand...
Click to collapse
I set my cpu to run at minimum when the temp reaches a certain level. It's never actually happened though...my phone runs real cool at 1.4ghz
Sent from my LG-P999 using xda premium
I'm using AOSP+ ICS ROM with the latest Matr1x kernel. Whenever I try to OC to 1460 the phone freezes and I have to pull the battery, so I'm forced to run at a maximum of 1300MHz.
Also, on a related matter, is it good practice to use SetCPU with various profiles (battery<, temp>, screenoff, charging) for various frequencies? Or should I just use AOSP+ tweaks to chose a min and max frequency and let it be?
Thanks for taking the time to answer these.
Raise all voltages by +30 across the board
Sent from my Nexus S using XDA App
My Phone freezes when i try to OC to 1460
Read the above comment or read my FAQ...god..
Lol
Sent from my Nexus S using XDA App
http://www.youtube.com/watch?v=DPclc3eKgiQ&feature=youtube_gdata_player
Sent from my Nexus S using XDA App
zgomot said:
Also, on a related matter, is it good practice to use SetCPU with various profiles (battery<, temp>, screenoff, charging) for various frequencies? Or should I just use AOSP+ tweaks to chose a min and max frequency and let it be?
Click to expand...
Click to collapse
If you are using deep idle you shouldn't underclock since it causes a race-to-idle condition. In other words your battery will drain faster. If you don't use deep idle, feel free to underclock when the screen is off or whatever you want.
sakisds said:
If you are using deep idle you shouldn't underclock since it causes a race-to-idle condition. In other words your battery will drain faster. If you don't use deep idle, feel free to underclock when the screen is off or whatever you want.
Click to expand...
Click to collapse
To the point and verry helpful, thanks a bunch
mathkid95 said:
Raise all voltages by +30 across the board
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Can I do this via AOSP+ tweaks and still use SetCpu to OC and UC? Are they conflicting apps? (Deep idle OFF)
Sent from my Nexus S using XDA App
I would recommend just using setcpu
Sent from my Nexus S using XDA App
mathkid95 said:
Raise all voltages by +30 across the board
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Just an update, Using CNA 1.4.0 and Matr1x v17, I am stable oc'ed to 1460.
this is what I am running
1)800/1460
2)gov =Ondemand
3)Scheduler =Noop
4)all voltages to +30 (used the cna rom's voltage tweaker)
I tried ShadowGun: the Leftover.. and It was flying. Of course, make sure that have enough battery or that you have a charger ready. But finally it works, try this and let me know
I can run it for 10-20 min of usage then get a freeze. I never raised the voltages before though. It seems like its working for other people. And the actual developer of Matrix Kernel is telling you to ....
Nexus S (GSM i9020a)
AOKP (Build 25)
Eugene's Kernel (Speedy 7)
OC 800/100 (Lionheart)
Live OC (105)
It still amazes me how so many people that ask about overclocking have no frigging idea at all how cpus/gpus in general are binned etc.
I have a question. Why do you guys overclock that much? It might be snappy but battery life is just bad and it just doesn't worth it in my opinion.
Sent from my Nexus S from Tapatalk
albundy2010 said:
It still amazes me how so many people that ask about overclocking have no frigging idea at all how cpus/gpus in general are binned etc.
Click to expand...
Click to collapse
Care to shed some light for us people that have no frigging idea at all how cpus/gpus in general are binned etc? If not, well... why did you even bother posting?
ljordan2 said:
I have a question. Why do you guys overclock that much? It might be snappy but battery life is just bad and it just doesn't worth it in my opinion.
Sent from my Nexus S from Tapatalk
Click to expand...
Click to collapse
Personally, I do it because I can. Seriously... I'm a geek, I love gadgets and tech and I like to tinker.
On the subject at hand, I'm still unable to OC to 1460 (ARM voltages +30, INT voltages +25) but at 1300 it runs fine, no issues whatsoever.
i can run 1460 stable all day. bigxie/matrix. just did +30 to all the voltages above 1000. deadline and lulzactive..
If you are a geek you would know about something as simple as binning chips. Do what a tech geek would do...look it up. Same thing the op should have done with his ?. Hell mathkid has a answer to his ? In the op of his kernel thread. Which is the kernel he is running
albundy2010 said:
If you are a geek you would know about something as simple as binning chips. Do what a tech geek would do...look it up. Same thing the op should have done with his ?. Hell mathkid has a answer to his ? In the op of his kernel thread. Which is the kernel he is running
Click to expand...
Click to collapse
You're kinda bitter for someone married to a busty redhead
jesusice said:
You're kinda bitter for someone married to a busty redhead
Click to expand...
Click to collapse
Haha, I thought so too.
Sent from my Nexus S
Are any 2ghz kernels compatible with cm7?
Sent from my Desire HD using xda premium
knightofthe9 said:
Are any 2ghz kernels compatible with cm7?
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
at the risk of offending you, I would not recommend setting your phone to 2ghz..I can assure you nothing great in the long term is going to happen. As for kernels give LordClockan and TalonAce a glance, I'm not 100% sure if they are 2ghz kernels but its a good jumping off point
2ghz will fry your CPU. Maybe not initially buy your phone will definitely fail prematurely. The only reasons other people do it is because they can and they probably have a newer phone for their daily. Even just overclocking a little bit can have a negative impact but not as drastic. If you insist on overclocking I wouldnt exceed 1.4.
With that said there are several Aosp kernels that will allow you to push it to the limit. Just search the dev forum.
Overclocking your cpu will not hurt it unless its running hotter than the cooling system can handle. It will cause lock ups and failure to boot. If you start overvolting it, you WILL cause premature damage to the chip itself. Optimum overclock has always been 10-20% increase for any processor. Personally id rather underclock and undervolt a little, runs cooler and less power drain.
gizmoe is right, 2ghz is a 'just cuz i can' overclock. it wont run stable at that level. its like the 8ghz overclocks you see on the intel processors using LN2 cooling lol.
2ghz is bad.
I ran my inspire at 2ghz and besides the battery practically counting down the phones was heating up and that was maybe 15 minutes. Definitely not a goods idea.
Thank you for the input and info guys.
I could over clock and undervolt on a past captivate. Is there any app you would recommended for the inspire on cm7 to do this?
Sent from my Desire HD using xda premium
knightofthe9 said:
Thank you for the input and info guys.
I could over clock and undervolt on a past captivate. Is there any app you would recommended for the inspire on cm7 to do this?
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
Setcpu use to be the go to app but many found it to lag after waking the phone. Many have now moved on to daemon controller. From the looks of it you're using CM7 which has the function built in..I believe its menu > settings > CM settings > performance...or something like that...don't check set on boot until you know how much OC your phone can candle. If you like CM, take a look at Absolution by the Collective. They have scripts written for custom profiles for OC and UVing.
MMM-BACONSTRIPS said:
If you like CM, take a look at Absolution by the Collective. They have scripts written for custom profiles for OC and UVing.
Click to expand...
Click to collapse
I've clocked to 2ghz a few times just to get a crazy quadrant score but that's about it. I usually keep mine somewhere in the 900mhz range with a little lite uv'ing and found that to be plenty.
2ghz can definitely be bad for your cpu..... Like to much bacon can be bad for your arteries.....
Sent from my Inspire 4G using XDA App