I use Bluetooth / wired headset. I want HTC Sensation to accept the incoming call automatically so that I don't have to press any button on my headset say when I am driving.
I have searched a lot, found partially working application called 'lazy car'. It does solve the problem partially because it only works when wired headset is connected. Does not answer calls when Bluetooth headset is connected.
The application's developer says it Bluetooth headset feature might not work on HTC, which is surely not working.
Can anyone please suggest a solution to automatically answer incoming calls please?
Thanks!
umartariq said:
I use Bluetooth / wired headset. I want HTC Sensation to accept the incoming call automatically so that I don't have to press any button on my headset say when I am driving.
I have searched a lot, found partially working application called 'lazy car'. It does solve the problem partially because it only works when wired headset is connected. Does not answer calls when Bluetooth headset is connected.
The application's developer says it Bluetooth headset feature might not work on HTC, which is surely not working.
Can anyone please suggest a solution to automatically answer incoming calls please?
Thanks!
Click to expand...
Click to collapse
Hi,
When I was on my HD2 using WinMo,there was an option to auto-answer.
I have the same bluetooth hands-free system that you mention,but I am unable to do this on the Sensation.
Sorry.
is there any solution or we are left?
umartariq said:
is there any solution or we are left?
Click to expand...
Click to collapse
Hi,
I have not yet found a solution.
Sorry.
Related
I want to purchase a BT headset for use under helmet in my motorbike, but I'ts not clear that the autoanswer feature work with BT.
My candidate it's the Jabra 250.
Any experiences ???
Thanks in advance for your replies !!!
There's an automatic pickup after x rings check box in phone settings. That will always work won't it ?
This only works with the wired headset that cames with the phone....
Nobody has a BT headset that autoanswer ?????
Auto answer with bluetooth is part of the handsfree profile (which the XDA does not support), not the headset profile. Sorry
justinmg said:
Auto answer with bluetooth is part of the handsfree profile (which the XDA does not support), not the headset profile. Sorry
Click to expand...
Click to collapse
Try Pocket Bluetooth tools.
It automatically activates bluetooth when you make and receive calls.
Just download the attached file.
Enjoy!
justinmg said:
Auto answer with bluetooth is part of the handsfree profile (which the XDA does not support), not the headset profile. Sorry
Click to expand...
Click to collapse
Try Pocket Bluetooth tools.
It automatically activates bluetooth when you make and receive calls.
Just download the attached file.
Enjoy!
This will activate autoanswer over bluetooth headset?? Have you tried it?
How to use BTHTools1100.exe
I installed BTHTools1100.exe, and I found that from my Jabra 258 FS I am able to make last call dialing just by clicking on my headset, which was not possible before. But I lost the pop up window, that used to show when I made the call from my PPC and it automatically got transferred to my Jabra, & would say "Do u want to transfer the call to Phone"!
Is there any eloborate help on BTHTools1100.exe
Regards,
Dr. Kushal
Hi,
I just bought a bluetooth headset for my Tytn. It's really usefull, but... when the headset is connected the phone only vibrates, it doesn't ring.
This can be usefull when i have the phone on me, but when i don't i cant't notice that i have an incoming call.
Is it possible to make the phone ring even when using the headset ?
Thanks,
Cyril
i have this problem on my kaiser, anyone able to answer? i did some searching but am not having any luck
I have bluetooth headset NOKIA BH-101. it works with my htc tornado like handsfree. but i can not get it play all sounds. it only works with calls but when ii play sounds or video files it sounds out of my phone.
This gadget supports Hands-Free and Headset but does not work with voice dial function. Can anybody help?
makler1981 said:
I have bluetooth headset NOKIA BH-101. it works with my htc tornado like handsfree. but i can not get it play all sounds. it only works with calls but when ii play sounds or video files it sounds out of my phone.
This gadget supports Hands-Free and Headset but does not work with voice dial function. Can anybody help?
Click to expand...
Click to collapse
try to chek the settings
bestever said:
try to chek the settings
Click to expand...
Click to collapse
what exact setting do you mean?
try this cab i found on http://mobile.surrealnetworks.com/
Check this thread too:
http://forum.xda-developers.com/showthread.php?t=263735&highlight=a2dp
This will install newest bt stack.
I should also ask which ROM you're using. The newer ROMs seem to be a lot better.
I'd also like anyone who could to tell me which BT stack is included on the newer ROMs, like Nitro or vjgrace.
Exitao said:
Check this thread too:
http://forum.xda-developers.com/showthread.php?t=263735&highlight=a2dp
This will install newest bt stack.
I should also ask which ROM you're using. The newer ROMs seem to be a lot better.
I'd also like anyone who could to tell me which BT stack is included on the newer ROMs, like Nitro or vjgrace.
Click to expand...
Click to collapse
my ROM is WM6 by vjgrace v3.4
Again I could describe my Nokia BH-101 BT headset with handsfree functionality on WM6 by vjgrace v3.5. It works nice as headset i can hera incoming calls, answer them, call last dialed number. But I CAN NOT make it start voice calling, due to device itself - it does sounds special tone that means that voice dial is started, but my phone does not recognise it. by the way useing celetask - there is special feature - that alows you to redirect all sound to headset and it work. As for me i don't need it (you are to have special BT Headset for listening to music. This headset generates rather bad sound(but not voice).
So again
I can do:
makle calls,
answer calls,
dial last dialed call.
swap and hold calls.
I can not do:
make voice dial
any voice commands
What are the problems:
Everytime I answer the call not by the headset but via the phone it looses the connection with headset, so i need to restart BT service (or headset).
It happens even if I answer by headset but during the call i need to speak via phone then i press right softkey and choose "turn handsfree off" and aain phone looses the headset
In this case I I make new call but in right soft key menu "turn handsfree on" is not active
If it's possible to make phone speak contact's name litterally during incoming call so i could know who is calling me.
IRC, voice dialling with WM phones is a bit of a problem. I seem to recall reading about this somewhere in the XDA-Dev forums.
On my headset, the function that calls for redial is the same for voice dial (wtf? I know.) It always redials.
As for the speaking of the contacts' names, it should be possible... if your phone can speak the contacts' recorded voice names w/o BT.
I'm sure you've heard of this issue before but I was unable to find a fix!
I have been using VC1.6 through strictly the device mic / speaker and it has worked great except for some reason it does not announce incoming calls.
Currently using ATT TILT with WM6
Using 520 Plantronics BT Headset
I downloaded "Bluetooth Voice Command Configuration" from XCSdM but it doesn't seem to do anything to help!
When I press the talk/end button on the Headset it enables the bluetooth static but it does not give the VC prompt.
I'd also like it to be able to announce incoming calls through the bluetooth!
Anyone?!
Well, I got the incoming calls to announce!!! Now all I need to do is find out how to get the VC1.6 and my bluetooth synced so that when I press my bluetooth headset button it activates the VC...
Please? LOL
Does your bluetooth headset support the handsfree profile? Not all headsets support the handsfree profile (even if you can use it to pick up and answer calls). I've got VC 1.6 and voice command working just fine with my Tilt and Jabra 8010.
edit: seems your plantronics does support the HFP. Did you ensure you "checked" the box for Hands Free Service when you paired it?
Yes, it's completely paired and the handsfree is checked :-\
I'm stumped. I get incoming call notifications, I get announcement reminders, etc.... but when I push the button on the headset it tries to initiate (or answer) a call.... If I hold it down, it powers off the headset. If I double click it, it calls the last person I talked to.
Maybe I just don't know how to function my headset to get it to prompt for VC?
I followed the "RandyRants" Tip to get everything working and it did activate the announcement of incoming calls, etc... just can't make commands yet.
I'm also using the BT VC Config enabled @ 30 duration.
I'm 1/2 way there!! Now I just need to cross the finish line...
Here's the link yo RandyRants that I followed: http://www.randyrants.com/2007/05/wm6_tip_voice_c.html
Any advice?
I want to record my phone conversations when I am using my Bluetooth headset (Because I drive alot).
At the moment it is not possible to record a conversation while using the Bluetooth headset. (I don't want to use a cable headset, because I get in and out the car alot).
The problem that occurs is that when recording with windows mobile it records your own voice, but not the voice on the other side.
I have tried with many other PocketPC's but I can't find anything that works.
Try it yourself if you don't understand whta I mean.
Does anybody have a solution for me?
Thx!
Possibly the problem is that when the headset is enabled the speaker of the phone is disabled.
So if somehow the speaker keeps working even when bluetooth headset is enabled it will record the conversation on the other side.