Related
I'm trying to flash my friend's Galaxy s 4g, but I'm having an issue with Odin failing to flash.
I originally used Vibrant 3g .pit and .tar files, not knowing it wouldn't work on the 4g model. Anyway, that semi bricked it, while still allowing it to get to the download mode.
So I figured I needed the "custom" .tar file to flash the 4g model. I booted up Odin and opened just the .tar that's in the noob guide. This time all I got from Odin is a red panel saying FAIL! It happened during the cache.rfs process. And now I get a new download mode screen. Before it used to be the android digging, now it's just an image of a phone and a computer with an exclamation mark in between the two.
When I get FAIL! on Odin, the progress bar on the phone freezes about 75% of the way.
So what am I doing wrong? Do I need a .pit file? Is it my computer? Should I try another computer? help me out please
I'm not sure about that second message you got, but did you make sure to open ODIN before flashing?
And do you also have the correct USB Drivers downloaded for your computer?
bustanut said:
I'm not sure about that second message you got, but did you make sure to open ODIN before flashing?
And do you also have the correct USB Drivers downloaded for your computer?
Click to expand...
Click to collapse
Yea, i had ODIN open before I connected the phone. And I made sure to install the correct drivers for it (It said "drivers installed successfully)
Another thing, is when I was trying to flash it thinking the regular vibrant 3g method would work, I had "Re-Partition" checked. Could that be part of the problem?
You're not supposed to have Re-Partition checked.
Refer to this guide to make sure you're doing everything right in the flashing process : http://forum.xda-developers.com/showthread.php?t=1001759
Well, I have been following that guide. Step by step.
But that was after I semibricked it.
Before, I thought using the method for rooting a vibrant 3g would work for the 4g model. I guess the "Re-partition" box was checked (before I started following that "Noobs guide") and that's why I'm having problems now.
The symbol you are now seeing on your phone means you have a currupt firmware. It was most likely caused by using the vibrants pit file. If you try everything else and it still doesn't work. You may have to wait until we either have a working pit. But follow the directions on the Odin flashing instruction and keep trying.
Good luck
Sent from my GT-I9000 using XDA Premium App
So, there's nothing I can do now besides keep trying? It's not my phone though... my friend was expecting it back today.
Is there a way I can get to the recovery menu and download somebody's nandroid backup to restore mine?
bryanoid said:
So, there's nothing I can do now besides keep trying? It's not my phone though... my friend was expecting it back today.
Is there a way I can get to the recovery menu and download somebody's nandroid backup to restore mine?
Click to expand...
Click to collapse
Sorry bud. Cwm doesn't work that way yet. And even so, I don't think you can even get into recovery mode with your problem. When you used the vibrant pit file you formatted the phone to be like the vibrant which its not. Its very similar, but different enough to cause issues.
Sent from my GT-I9000 using XDA Premium App
Seriously stupid mistake.. was in Rom manager and loaded alt recovery.. drinking a bit and thinking I was using my Evo 4g.. so Amon Ra loaded and all I get now is default samsung splash screen!!! what an idiot. also when I plug in a usb at boot I just get this loading circle that freezes immediately. ..... Did I kill it?
I'd go into download mode and reflash it.
Sent from my SGH-T959V using Tapatalk
Not familiar with samsung.. just switched from my EVO.... but after doing a bit of r&d I finally figured out how to get to the yellow triangle download screen. Currently downloading odin 1.7.. and downloaded the odin t959vbk5.tar file.... any information would be greatly apprecaited... not sure what to do next.. i plan on running odin 1.7 though
Thats all u need just put phone in download mode and use odin to flash one of the roms in the forum its really easy im new to samsung aswell and I got it on first try yheres a guide for noobs in the forum on how to flash with odin too.
Sent from my SGH-T959V using XDA Premium App
1. Open odin
2. On odin there is a button named PDA click on it and load the .tar file (kb5, kc1, kd1)
3. Put phone into download mode
4. Click start
Hope your good after now
Sent from my SGH-T959V using XDA Premium App
thanks for the reply guys..
got odin 1.7 and 1.3.. and it downloads.. I get the blue bar loading on the phone about 99 percent .. and gets just about 100 percent then.. odin says "FAIL" in red.. .. I'm gonna keep trying stuff but if you have any experience with this error let me know..
Thanks!! .. I'm feeling like there's hope now!
Is this gonna be one of those cases where there is no hope until a .pit file becomes available?
How did you fix???
I am having the same issue.
I run Odin 1.85 and I get to 99% and it dies right after it says Data.
hammermedia said:
I am having the same issue.
I run Odin 1.85 and I get to 99% and it dies right after it says Data.
Click to expand...
Click to collapse
Try it with the kg4 leak in the dev section
Sent from my SGH-T959V using XDA Premium App
If you don't want GB, look for RaverX3X's KC1.
Download the KF2 or any rom.
Put phone in download mode.
Open odin. Any version over 1.0.
in PDA section, input the KF2.tar file or rom you downloaded
In Pit section, input the .0512 pit file. Click start and youre good to go.
Sent from my SGH-T959V using XDA Premium App
Initially, this post was meant to fix people's phones after a bad restore from CWM, but now I'm changing it to be more general and pretty much be a guide for how to fix your phone from nearly any problem. The original reason for this post is this error:
Code:
-- bootmode=7 from cmdline...
-- Movi_check Start..!!
checksum confirmation need_checksum[0]
Not need checksum confirmation
--Movi_check already executed!!...
--movi_checking done!...
# MANUAL MODE #
It was caused by a problem with /data and this guide helped fix that. Now that several other things have come along (leaks, voodoo, etc.) people are having a host of random errors show up with their phones. This guide will hopefully get you back to a working phone regardless of what is wrong with it. Take note though, that following this guide will delete all data not on the sdcard. So, with that being said, here is how you can fix your phone.
1. Download one of the packages below as well as the PIT file.
2. Open up Odin, click PDA, and select the package you downloaded
3. Click on PIT and select the PIT file that you downloaded.
4. Get your phone into Download mode.
4a. Pull out the battery, hold down on Vol Down, and plug in the USB Cable while still holding the button.
4b. After you are in Download Mode, put the battery back into your phone. This increases the reliability of flashing with Odin
5. Make sure your phone is recognized in Odin
6. Check the box for Re-partition (Odin will fail if you check this and don't use the PIT file) and un-check the boxes for Auto-Reset and F. Reset Time.
7. Press "Start" and flash the package.
8. After it is finished flashing, take the battery out, unplug the USB cable, put the battery back in, and start up what should now be a working phone.
Download descriptions. There are 3 files linked to below. The first is the PIT file, and required for this. The PIT file is the partition information table. It tells your phone where different packages go on the phone, as well as how big partitions are on the phone. Without this information, Odin cannot properly re-partition your device. The next two files are more or less the same and you will only need one of the two, not both (unless you want them just for fun). There is ED1, which is what the phone initially shipped with, and ED2, the update that was released just after the phone was. The ED1 package may be a little bit smaller for those that are concerned about download size as it is compressed. However, you will need 7-zip or similar to extract it after downloading. Also note that this cannot be done with Heimdall as Heimdall does not have the ability to re-partition your phone, thus, you need a Windows computer to be able to follow this procedure.
All packages are available here.
Sweet, as always thanks for the work/effort on this stuff. At least now we don't have to be AS concerned atm if a restore was done in CWR and someone hoses there device.
this work for anyone?
Updated this with what I believe to be the proper steps. I was in and out at work while papi was fixing his phone, and lost track of the exact files used, but some combination of the above Odin packages and the PIT should get you back to a working phone if you are having a problem.
Good sh|t man ... phone was bound to have growing pains.
papi92 said:
this work for anyone?
Click to expand...
Click to collapse
Unfortunately, I am trying to fix this very problem right now.
I was able to get rid of the error message with your method and I can now get into CWM again.. which is progress. I used the smaller file as it looks like the bigger one was corrupt for me (may just have been a bad dl on my end). I'm re downloading the full file now.
Anyway, I used odin. Selected the charge.pit and repartitioned. I allowed that to finish. I then restarted and flashed the smaller .md5 file. I then was able to reboot into CWM.. which is where I am now as the system just boot loops on the Samsung logo ATM.
Any words of wisdom to get me out of the boot loop would be great.. I'll check back later - hopefully with news that I fixed my phone.
trebores1 said:
Unfortunately, I am trying to fix this very problem right now.
I was able to get rid of the error message with your method and I can now get into CWM again.. which is progress. I used the smaller file as it looks like the bigger one was corrupt for me (may just have been a bad dl on my end). I'm re downloading the full file now.
Anyway, I used odin. Selected the charge.pit and repartitioned. I allowed that to finish. I then restarted and flashed the smaller .md5 file. I then was able to reboot into CWM.. which is where I am now as the system just boot loops on the Samsung logo ATM.
Any words of wisdom to get me out of the boot loop would be great.. I'll check back later - hopefully with news that I fixed my phone.
Click to expand...
Click to collapse
Can you flash anything in CWM? Or how about odin the Ed1 rooted package.?
hoppermi said:
Can you flash anything in CWM? Or how about odin the Ed1 rooted package.?
Click to expand...
Click to collapse
I'm going to try that next.. it's downloading now (slowly). It may just be me, but I can't get the full ED1_CWM_Fix.tar.md5 to flash at all. I have now downloaded it from multishare direct and rapidshare and both fail the same way (Write operation failed).
hoppermi said:
Can you flash anything in CWM? Or how about odin the Ed1 rooted package.?
Click to expand...
Click to collapse
And, yes - I was able to previously flash the ed2-debloat rom from CWM, but it wouldn't boot up... I may try that again while I'm waiting for the stock-ED1 root to finish downloading.
trebores1 said:
I'm going to try that next.. it's downloading now (slowly). It may just be me, but I can't get the full ED1_CWM_Fix.tar.md5 to flash at all. I have now downloaded it from multishare direct and rapidshare and both fail the same way (Write operation failed).
Click to expand...
Click to collapse
Pretty sure that papi flashed this http://forum.xda-developers.com/showthread.php?t=1085190 one the error message was gone, and he was good to go.
Hey after you flash the smaller package given by imnuts07 I flashed stock ed1 rooted thru odin and it worked.
Sent from my SCH-I510 using XDA Premium App
papi92 said:
Hey after you flash the smaller package given by imnuts07 I flashed stock ed1 rooted thru odin and it worked.
Sent from my SCH-I510 using XDA Premium App
Click to expand...
Click to collapse
Yeah, that worked. It got rid of the error and I can now boot into stock recovery.. but I'm stuck in a droid eyeball bootloop now. Not sure what else to do. I factory reset everything. I think it's time to just return to the VZW store.
Don't return it. You got that far it can be restored. Try flashing altered beast thru odin o
Sent from my SCH-I510 using XDA Premium App
Also start up took about 10 minutes for me and make sure your phone still isn't on ext 4.
Sent from my SCH-I510 using XDA Premium App
Same here. Flashing altered beast fixed the problem and let me cwm flash debloatedv4. (4.1 seems really buggy)
Sent from my SCH-I510 using Tapatalk
papi92 said:
Also start up took about 10 minutes for me and make sure your phone still isn't on ext 4.
Sent from my SCH-I510 using XDA Premium App
Click to expand...
Click to collapse
I think I turned off ext4. In cwm I disabled the voodoo lagfix and the voice said that it was disabled. How else would I tell if it's off?
I tried your other suggestions too. Flashed altered beast, ed1 rooted, no luck getting past the bootup loop.
When you restored via Odin using the almost-everything.tar.md5, were you able to reboot and use your phone? I can't get that far. If I reboot it just hangs on the samsung logo. After that, I can flash altered beast or ed1-rooted and I get to the droid bootloop.
Trust me, I don't want to return it.. I'm sure there's a fix here somewhere.
You need to wipe data. You have too. And yes I got stuck at Samsung logo after. I had to flash stock ed1 rooted then wipe data
Sent from my SCH-I510 using XDA Premium App
trebores1 said:
I think I turned off ext4. In cwm I disabled the voodoo lagfix and the voice said that it was disabled. How else would I tell if it's off?
I tried your other suggestions too. Flashed altered beast, ed1 rooted, no luck getting past the bootup loop.
When you restored via Odin using the almost-everything.tar.md5, were you able to reboot and use your phone? I can't get that far. If I reboot it just hangs on the samsung logo. After that, I can flash altered beast or ed1-rooted and I get to the droid bootloop.
Trust me, I don't want to return it.. I'm sure there's a fix here somewhere.
Click to expand...
Click to collapse
To find out if lagfix is disabled run mount from a root terminal app, or adb shell mount if you're hooked up to your computer. If anything shows up as ext4, lagfix is still enabled. If it is all rfs/vfat/not ext4 then you're ok.
Progress has been made! I followed steps 1-8 on imnuts guide. On step 8, nothing happens(as it should). Rebooted into download mode, flashed almost-everything, rebooted, system hangs on samsung logo. Rebooted into download mode, flashed ed1-rooted. Rebooted, system boots into phone!
Now I get an error that my sim card is not supported or readable.. but at least I got back into the phone..
trebores1 said:
Progress has been made! I followed steps 1-8 on imnuts guide. On step 8, nothing happens(as it should). Rebooted into download mode, flashed almost-everything, rebooted, system hangs on samsung logo. Rebooted into download mode, flashed ed1-rooted. Rebooted, system boots into phone!
Now I get an error that my sim card is not supported or readable.. but at least I got back into the phone..
Click to expand...
Click to collapse
Did you activate another phone? I know someone w/ a TB who reactivated his Fascinate then wanted to switch back and his sim wouldn't work. Had to get a new one.
Sent from my SCH-I510 using Tapatalk
I have seen many posts about this before, and tried to follow them and they did not work for me. Was trying to install a rom then realized it soft bricked because i still had the stupid voodoo cwm installed. So i go to use odin and flash stock. Did that, all settings were fine in odin, but im stuck at TMobile Sidekick boot screen. Ive tried odin MULTIPLE times now and its still not working. Any hope?
Hmm, did you try Odin with 're-partition' checked? I always check that when Odining back from Voodoo lagfix.
Yes i had that and auto reboot checked
that's strange. well, as long as you have the SK boot screen there is definitely hope. what stock tar file are you using, where did you DL it? and you had the pit file in place too, yeah?
it should work. also, there is adamoutler's Heimdall as another option, i have used that also.
I did have the pit file in. and i selected KD1OdinSTOCK.tar through PDA. Also i could not figure out heimdall..
you might wanna try the KG2 file, the KD1 was not as reliable to me, from what i remember. will link you to the KG2 in a second...
find the KG2 Odin Tar in the first post here: http://forum.xda-developers.com/showthread.php?t=1538576
that should hopefully work for ya.
Downloading now thanks for the link
no problem, let me know how it goes.
still not working
[EDIT] I downloaded a different KD1 and it worked! thanks for the help though!
yikes, sorry about that. not sure why that would be... unless one of the components of the tar file isn't flashing.
so it is hanging at the boot logo when it tries to boot up? Odin runs thru the whole process(about 3-4 minutes), and you get the green "Pass" message at the end.
a different KD1 download worked thanks though!
ok, great!
Can i get the kd 1 tar file u used to fix ur sidekick 4g
plz help me i need the kd 1 tar file that u used to fix ur sidekick 4g
salehnew said:
plz help me i need the kd 1 tar file that u used to fix ur sidekick 4g
Click to expand...
Click to collapse
Go to sticky on the development thread, you can find them there re-uploaded
Sent from my SGH-T839
I tried it it. It works but when it restart it stick in logo
Sent from my SCH-I500 using xda app-developers app
I got it rooted, installed a few apps and everything seemed to be working fine, i shut it off for the night and woke up yesterday morning and it gave me this screen.
(I cant post a link, but if you google Firmware Upgrade Encountered, it pulls up quite a few pictures of this same situation.
I can't get into download or recovery mode. The samsung logo will appear for a split second before this screen appears. Kies does not reconize the phone. All i want to do is get my phone to turn on and go back to stock settings.
Can anybody please help me?
Use odin to flash the stock rom. Did you pull the battery?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Im not sure where to get the stock rom.. and when i get it should i put it next to PDA and tick the same boxes i used to root it? Also, do i need to use a pit file?
EDIT: Also yeah, i did pull the battery out. Thats the only way to turn the phone off now, as it is completely unresponsive.
Go to Sammobile.com. you'll down load a zip file. Use 7-zip to extract the .tar.md5 file out of it. Use that in PDA. Only have auto-reboot and f.reset checked.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Sorry to be such a noob.. but I looked around on that site and can't seem to find a .zip file to download.. the only files i can find are for phones that aren't mine.
You'll have to register, it's free. There is a firmware section on the site. It'll walk you through the type of phone,etc. And then give you s couple of files available for Doreen load. The newest one is ics
Damn spell correction
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Awesome! I think i found the file, 1 hour download time but hopefully this will fix it.
Kincayd said:
Awesome! I think i found the file, 1 hour download time but hopefully this will fix it.
Click to expand...
Click to collapse
But if you can't get in download mode (per your op) downloading the file will do you no good. I don't understand why the other poster told you to Odin. You can't Odin unless it is in download mode. :what:
pre4speed said:
But if you can't get in download mode (per your op) downloading the file will do you no good. I don't understand why the other poster told you to Odin. You can't Odin unless it is in download mode. :what:
Click to expand...
Click to collapse
Oh.. .well what should I do then?
If you can get the com port to light up in Odin chances are it'll flash. That'll be the next step.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Does the com need to light up yellow or light blue?
Yellow
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
alright, thanks for all the help. 13 mins left on the download
While it's downloading, does odin recognize your phone? Also, I'm assuming you put the battery back in and having the same problem, it didn't boot.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
While it's downloading, does odin recognize your phone? Also, I'm assuming you put the battery back in and having the same problem, it didn't boot.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Im not sure how to tell if its recognizing it, I did try that with the battery, and after it downloaded there as an MD5 File and an application extension. what should I do with the extension?
You don't need the extension, just the md5. When you plug your phone into the computer with Odin running, the batter needs to be in, does the com port light up? I'm also assuming your Odin version is 1.85
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Im using Odin v3.07 do i need the older one?
I've not had good luck with the newer one. I'd recommend 1.85.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Oh my god it worked! You are my new best friend!!!
EDIT: I spoke too soon, now it is stuck at the Rethink Possible logo
EDIT 2: Never mind.. just taking a long time to load, thanks for all of your help man!
Great! Been there so figured it would. Now you can start over.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app