What are nightly builds?
Nightly builds are automated builds from latest cyanogenmod sources. they are not tested in deepth like RC's or stable versions. In most cases they work without any issues. Thats because all patches get reviewed before they are merged into sources - this way, merging of bad code doesnt happen very often.
Since vega does not have official nightly status yet, i do semi-official builds for you on a semi regular basis. We will get official nightlies, once bluetooth is working - but that is a pretty complicated issue.
Vendor vega
The vendor vega is currently for Advent Vega and PoV Mobii devices. There might be more added later on.
Official nightly mirror
http://mirror.teamdouche.net/?device=vega
Update 31.05.2011
buildbot had a hdd crash, and it can take some more days until nightlies are back online. that long, i might post semi-official nightlies here.
mirror1: cm_vega_full_teamdesire-20110531-1412.zip size: 66M (68406215 bytes)
mirror2: cm_vega_full_teamdesire-20110531-1412.zip md5sum: 3b8bb1c21cb7c992927566a609a8c21d
Nightly changelog
http://cm-nightlies.appspot.com/?device=vega
Nightly install instruction
Coming from another rom?
Do a full wipe in clockwork mod recovery
Install latest nightly build from here
Flash latest gapps from here
reboot
do the first-time-run-setup wizard
if you dont use gsm/phone, reboot to recovery and flash attached vega-phone-removal.zip - saves battery
Upgrading from older nightly?
Just flash latest rom from here in clockworkmod recovery
No need to wipe or flash gapps again, if you done on first install
In rare cases you will encounter bugs, noone else encounters - wipe then and do a fresh install
In at least 99% no wipe needed - there are known people not having wiped for at least half a year
Doing a nandroid backup before upgrading is always a wise idea, in case something goes wrong
if you dont use gsm/phone, flash attached vega-phone-removal.zip - saves battery
reboot to your updated rom and enjoy
Overclocking instructions
use settings->cm settings->preformance->cpu settings to switch frequencies. optionally use setCPU and similar tools.
USB Host mode instruction
to enable usb host mode for keyboard, mouse and other support, power device off. power it back on. once the screen gets lit, press and hold back key until device is booted (you see the homescreen or lockscreen). now you can connect various usb devices.
clockworkmod 3 for vega
with nightly 61 and later, use rom manager to flash latest stable recovery.
List of known bugs
This is a list of cm7 bugs specific to vega - i wont cover cm7 general bugs here, since they are covered on other places. Feel free to discuss them here, thats what this thread is for.
no legacy a2sd yet - working on it
power->reboot->recovery doesnt work and power->reboot->bootloader should be removed
Removed Themes
To save space, we had to remove the two cm included themes. If you want them, just download them here and install like any other app.
mirror1: Cyanbread.apk size: 3.6M (3748359 bytes)
mirror2: Cyanbread.apk md5sum: a6963767a063a888536bc470569dcb54
mirror1: Androidian.apk size: 4.0M (4192665 bytes)
mirror2: Androidian.apk md5sum: 6657fa2e31c5a86ec5bdb03ac6e72a65
Removed Wallpapers
To save space, we also removed CMWallpapers app. To reinstall them on data partition, download this app and install like any other app.
mirror1: CMWallpapers.apk size: 6.0M (6248124 bytes)
mirror2: CMWallpapers.apk md5sum: b0d02c6eb75e39b7aa0b77e5cee20ace
This seems really sweet!
I have some questions:
1) Can the soft buttons be placed further away from each other? Unlike the Nook Color, the Advent Vega has a screen with touch registering issues and it's probably easy to misclick buttons if they're in the normal disposition.
2) What's the "encore" release for?
Danke für die Anstrengung!
Hi i tried to install CM7 before the version b2 and now this one and both stuck at the boot screen with android and the arrow makes circles. Do i miss something? i tried full wipe + format sd but still nothing. I must wait longer than 20 min?
Any suggestions
Thank you
dkampo said:
Hi i tried to install CM7 before the version b2 and now this one and both stuck at the boot screen with android and the arrow makes circles. Do i miss something? i tried full wipe + format sd but still nothing. I must wait longer than 20 min?
Any suggestions
Thank you
Click to expand...
Click to collapse
Same here. Full wipe of data, cache, dalvik cache.
Waited 40 minutes but system does not boot. Only arrow making circles. Restart did not help either.
Welcome to Vega Murdock, remember you from my DesireHd Nightly days. Whats up with these two zips? One is the rom and one addons?
Logseman said:
This seems really sweet!
I have some questions:
1) Can the soft buttons be placed further away from each other? Unlike the Nook Color, the Advent Vega has a screen with touch registering issues and it's probably easy to misclick buttons if they're in the normal disposition.
2) What's the "encore" release for?
Danke für die Anstrengung!
Click to expand...
Click to collapse
with the big buttons (much bigger as on default cm7), i dont have any issue to hit what i want. dont want it even bigger.
BeeGee_Tokyo said:
Same here. Full wipe of data, cache, dalvik cache.
Waited 40 minutes but system does not boot. Only arrow making circles. Restart did not help either.
Click to expand...
Click to collapse
zero idea. works here. gotta point bumble bee to this. you did take the vega build and not flash the encore build?
nickwarn said:
Welcome to Vega Murdock, remember you from my DesireHd Nightly days. Whats up with these two zips? One is the rom and one addons?
Click to expand...
Click to collapse
still having and hugging my desire hd
encore = nook color
vega = vega + mobii
i just copied that post from the nook color thread where this is all discussed.
please discuss overall issues (non-vega-related) on nook color thread
mad-murdock said:
...
zero idea. works here. gotta point bumble bee to this. you did take the vega build and not flash the encore build?
...
Click to expand...
Click to collapse
Yes, I checked the file on my SDcard its the Vega file. I checked as well the build.prop and updater-script, it says definitely Vega.
When I am back home tonight I will reflash stock ROM to recover and retry flashing your ROM.
The Vega rom boots and runs nice. Its very odd having statusbar going from bottom to top but very cool. Nice work. Now back to testing
Just one question, why did you post Nook Colour rom here? Encore is Nook, right?
Maybe we could have multi language, would be nice
Edit. You answered before i posted, im to slow
mad-murdock said:
...
zero idea. works here. gotta point bumble bee to this. you did take the vega build and not flash the encore build?
...
Click to expand...
Click to collapse
nickwarn said:
The Vega rom boots and runs nice. Its very odd having statusbar going from bottom to top but very cool. Nice work. Now back to testing
Just one question, why did you post Nook Colour rom here? Encore is Nook, right?
Maybe we could have multi language, would be nice
Edit. You answered before i posted, im to slow
Click to expand...
Click to collapse
Does the ROM require EXT2/3/4 on the SD card? I don't have it and this is the only thing I can think about at the moment which might be different.
The ROM comes with its own kernel? I had before installed [KERNEL] Buzz Vega | .32.35 | CIFS | TUN | EXT4 | SLAB | NOOP | WiFi | NTFS | HOST/SLAVE | 0.7, Updated 25/03/11 from buzzing bee. But that should have been overwritten when I flash your ROM.
BeeGee_Tokyo said:
Does the ROM require EXT2/3/4 on the SD card? I don't have it and this is the only thing I can think about at the moment which might be different.
The ROM comes with its own kernel? I had before installed [KERNEL] Buzz Vega | .32.35 | CIFS | TUN | EXT4 | SLAB | NOOP | WiFi | NTFS | HOST/SLAVE | 0.7, Updated 25/03/11 from buzzing bee. But that should have been overwritten when I flash your ROM.
Click to expand...
Click to collapse
I came from CorvusVega rom but as long as you wipe everything cache,dalvik,system,data,boot, it shouldnt be a problem. I hate that we cant get in to recovery from off position. If thats possible to do with some hack that should be the next big thing
Hello,
when i try to download your ROM i became a error 404 file not found.
new build, new features, new links - updated first post.
and yes, its buzz kernel - no idea if he made slight modifications, but its the same guy responsible for buzz kernel and vega cm7 target.
rbensch said:
Hello,
when i try to download your ROM i became a error 404 file not found.
Click to expand...
Click to collapse
deleted the old files BEFORE uploading... shouldnt do that next time get new build from first post
mad-murdock said:
new build, new features, new links - updated first post.
and yes, its buzz kernel - no idea if he made slight modifications, but its the same guy responsible for buzz kernel and vega cm7 target.
Click to expand...
Click to collapse
Does this means we can do the switch to host mode by the back button trick?
Can anyone try?
Thanks!
Got the ROM finally working, maybe during 1st flash something went wrong.
Its still the old version, new version is still downloading (terrible slow connection here in China).
I installed it on a Viewsonic Viewpad 10s, which is the Vega but with build in 3G card. Unfortunately the card is not working. when I go to the settings -> Wireless & network settings -> Mobile networks, I can enable data communication, but he does not find any provider and the signal in the task bar shows no signal.
In the stock 1.09 ROM its working without any problems.
Will download latest version, test again and report here.
Harplo said:
Does this means we can do the switch to host mode by the back button trick?
Can anyone try?
Thanks!
Click to expand...
Click to collapse
should work. feel free to flash another kernel over this. changes are not kernel related.
current build got some minor bugs which I fix when I get back tonight. mainly the new soft button. check nook color thread for details
Morsed by hitting a plastic pipe with my Desire HD. Excuse typos.
I believe this rom will have the same kernel as Bumble-Bee's CM7 build, so no host and no a2sd!
However I have asked BB to make a new kernel so hopefully he will do this asap.
Great Rom!! Thanks for sharing your work & time with us.
Thinks I like.
CM7 Booting image
CM7 look & tweaks
CM7 Table tweaks, especially bottom bar.
Host mode working. N1!
Don't like:
The bar buttons. Really don't like them.Any change of changing them? I know it's a silly thing but them seem huge to me.
Bugs I found:
Default Keyboard going on and off every time I press a key. Annoying.
Wifi disconnecting randomly and not reconnecting in a while.
Touch Screen not responding until I change orientation. Weird.
Thanks!
Harplo said:
Great Rom!! Thanks for sharing your work & time with us.
Thinks I like.
CM7 Booting image
CM7 look & tweaks
CM7 Table tweaks, especially bottom bar.
Host mode working. N1!
Don't like:
The bar buttons. Really don't like them.Any change of changing them? I know it's a silly thing but them seem huge to me.
Bugs I found:
Default Keyboard going on and off every time I press a key. Annoying.
Wifi disconnecting randomly and not reconnecting in a while.
Touch Screen not responding until I change orientation. Weird.
Thanks!
Click to expand...
Click to collapse
We are all diffrent i like the soft buttons. about keyboard going on and off try moving soft buttons to right side and remove quick notification button. That fixed it for me. The buttons can be changed back later than it will work as it should. But i think theres some strange behavior from quick notification button, for example when pressing it it shuts down the screen it dont answer to any touches only on soft buttons, so i have to press the statusbar up and from there press the back button then it wakes up. I dont know, maybe its supposed to be like that.
Very nice ROM. Flashed it last night and seems to work nice. The buttons work great.
However i have a performance issue. A couple of minutes it works very smooth and then it freezes for a while and then continues. Still have the problem after a couple of reboots and after using it for a few hours.
second i installed the gapps that are available for CM7 (the metapackage wich should also work for tegra based devices). I can download apps, but then i cannot see in the market as downloaded.
I came from Modaco r8 and did a full wipe before installing.
Keep up the good work.
EDIT: When the screen freezes only the statusbar and the buttons are responding on touches. The rest of the screen does not respond. The screen will respond again when i change the orientation of the screen (i.e. from landscape to portrait and back to landscape).
Sent from my HTC Vision using XDA App
I installed the rom and i dont have a 4g icon but an H, and there are no apps just basic ones like no market none of that stuff. Does it all have to be downloaded manually or is it supposed to come loaded with some stuff. Iknow i should post this in the WildchildIcE v0.9 section but it wont let me ask any questions cuz im new to the forum
your also supposed to download gapps....i would link you but im on mobile. Check for the gapps download near the regular download.. Im aware that in some cases the H icon will still show and a fix for that will come soon.
ahhh ok dl'ing it now. is there a special way to install gaps
You'll flash gapps zip file from recovery just like the rom.
Sent from my myTouch_4G_Slide using XDA
You will find that the v0.9 version will have the "ROM Control" working wonderfully but the soft keyboard & proximity senser are still borked. If you find those are "deal breakers" for you (and they are for some people) you can flash the 6/19 "nightly" and swap a fix for those two issues for having "ROM Control" FC'ing until XMC has a chance to iron out the issue.
Just my 2 cents.....
....don't forget the gapps
How do I get wifi to work?
I have flashed your v0.9 and followed the installation instructions and I must say it all went very fast and smoothly. However
I'm unable to turn on wifi. It says in the change log that this works. What happens is that when I click on wifi, then go to the wifi screen and touch "on", it quickly moves to on but immediately goes back to off and the screen is stuck saying "turning wifi on". So how do i get this to work?
If it makes any difference I came from another rom, http://forum.xda-developers.com/showthread.php?t=1758767&highlight=v2.
Also, when sending text messages, I use go sms, and for some reason now i no longer have auto correct/spell check.
It actually doesn't recognize about 90 percent of the words I type. It says they're incorrect even though they aren't.
Any thoughts?
Thanks. Awesome work. I'm totally enjoying your roms.
First of all, I would suggest you use ONLY CWM 5.0.2.7 or 5.5.0.4.
Secondly, always do a FULL wipe when coming from another ROM. It's also a known issue with CWM that if you don't do those wipes 2 or 3 times it's very possible to leave bits and pieces behind that may cause glitches like you have described.
Third.....if you have already followed the 1st & 2nd suggestions you may have gotten a few packets corrupted in your DL and should probably at least do another and reflash.
This could make a huge difference and I forgot to even consider it. If you have one of the newer bootloaders you'll need to flash your boot.img file thru ADB after you have flashed your "rom".zip file. You will also want to isolate a copy of your DL and expand the file so that you can copy your boot.img to where you normally flash files from. From what I have personally seen, it is VERY important that it isn't copied directly from your "rom".zip file and flash that because it will remain wholey or partially compressed and have various parts of you ROM disabled just as you described.
Samsung infuse sgh-i997 will act up at random times I can't really put my finger on it. I've had this phone for over two years one year rooted its weird that I can't really describe the symptoms and it makes it harder to help me I know. Do I ran a stability test on it to figure it it because sometimes my internet won't work. Or I'll open Facebook and it causes my phone to crash.
But I did a "scaling stability test (root)" does in fact send my phone into a black screen and I cannot back out or press home to cancel eventually screen goes black and when light goes out it doesn't come back on I have to pull battery to reboot phone.*
Super user access was granted and my sgh-i997 & rooted stock usin XDa-developers website *instructions via Odin.
I heard this means there is a problem with my kernel? its this true? And if so How do I fix this?
How to narrow it down:
Any clue of things you changed/added just before it started acting up?
I don't think there is a way to get logcat of stuff going on before reboot.
Some ideas:
Try removing undervoltage if you have it.
Try changing cpu governor parameters.
Try removing or disabling suspect programs
Factory reset
qkster one-click back to stock GB 2.3.6
No, I do not know what was done right before it started to act up. I don't mess with cpu or governor parameters or undervolt/underclock, or anything like that. I have a stock rooted g.b. 2.3.6 with voodoo lagfix, i did flash the 16 notification toggles zip found on "Infuse super everything" thread. and the remove sms from call history .zip from same thread. I don't mess with changing kernels or anything as I do not really understand what a kernel is or does. So I leave it alone.
I wish I did have some way to look at logs of my phone as you suggested do I have one. Where can I get one and what do you suggest I use?
Re: [Q] phone randomly acting writers
Those things you flashed...were they for Deodexed rom? I think stock is the opposite (odexed?)
Do you have link for them?
Sent from my SAMSUG-SGH-I997 using xda app-developers app
I looked at the infuse super everything thread (ISET)
http://forum.xda-developers.com/showthread.php?t=1610374
This "remove SMS from call log" looks ok for stock odex
http://forum.xda-developers.com/showthread.php?t=1415500
For notification toggles I don't see anything in the ISET except this "mod collection" which is for de-odexed...I don't think it will work for stock (and could cause problems)
http://forum.xda-developers.com/showthread.php?t=1698972
the stock rooted rrom that i rooted my phone with via Odin was this ...
************ OPTION C *************
I997UCLB3-CWM-root-deodex-extras.rar
Features in this version
- Entropy's Daily Driver kernel
- Red CWM recovery
- Rooted
- Deodexed
- Zipaligned
- Busybox
- AT&T and other bloatware removed
- Scrolling wallpaper fix
- CRT off animation
- 8 lock screens
- Extended power menu
- Accurate battery mod
- Get lidroid's 14 statusbar toggles HERE
And I just remembered I did flash Infuse Toolkit from the "samsung infuse super everything" thread as well and the .... "[TWEAK] Adrenaline Shotv12/ Universal Adrenaline Shotv13/Mod Build.prop" after i flashed these two I ran them probably only once a piece. And didn't mess with the again afterwards.
oreo918 said:
the stock rooted rrom that i rooted my phone with via Odin was this ...
************ OPTION C *************
I997UCLB3-CWM-root-deodex-extras.rar
Features in this version
- Entropy's Daily Driver kernel
- Red CWM recovery
- Rooted
- Deodexed
- Zipaligned
- Busybox
- AT&T and other bloatware removed
- Scrolling wallpaper fix
- CRT off animation
- 8 lock screens
- Extended power menu
- Accurate battery mod
- Get lidroid's 14 statusbar toggles HERE
And I just remembered I did flash Infuse Toolkit from the "samsung infuse super everything" thread as well and the .... "[TWEAK] Adrenaline Shotv12/ Universal Adrenaline Shotv13/Mod Build.prop" after i flashed these two I ran them probably only once a piece. And didn't mess with the again afterwards.
Click to expand...
Click to collapse
My bad, I was using qkster's Heimdall one-click ULB3 stock as a reference for stock - it is odex type.
I really don't have any more ideas. Maybe someone else does....
I have a problem with the phone. What is this doing to me with all that flashing roms and kernels to mobile.
I'm now with Kyrillos ROM 9.7.2 with G3Mod's 2.5 and I freeze, get an error of some application, may be the theme, or whatsapp and I have to restart the phone. He remains in unusable condition, you can move the status bar up and down, turn off wifi etc ... but if they call you, it sounds, it does nothing (locked), the theme does not work (you can not enter the menu or anything).
And so with all the roms I've tried and kernels. But who else does this, is with the kernel fugumod.
I thought it was problem of restoring the program applications with Titanium Backup. And I started installing the applications of 0, but it turns out I do the same, and each "X" hours I find the phone frozen, not receiving calls etc. ..
What can be the problem? I'm thinking it may be a problem with the SDCard or something: S, but the Sdcard works very well, is a Samsung 16GB HC 6
Any suggestions to solve this?
Thanks
Miquene said:
I have a problem with the phone. What is this doing to me with all that flashing roms and kernels to mobile.
I'm now with Kyrillos ROM 9.7.2 with G3Mod's 2.5 and I freeze, get an error of some application, may be the theme, or whatsapp and I have to restart the phone. He remains in unusable condition, you can move the status bar up and down, turn off wifi etc ... but if they call you, it sounds, it does nothing (locked), the theme does not work (you can not enter the menu or anything).
And so with all the roms I've tried and kernels. But who else does this, is with the kernel fugumod.
I thought it was problem of restoring the program applications with Titanium Backup. And I started installing the applications of 0, but it turns out I do the same, and each "X" hours I find the phone frozen, not receiving calls etc. ..
What can be the problem? I'm thinking it may be a problem with the SDCard or something: S, but the Sdcard works very well, is a Samsung 16GB HC 6
Any suggestions to solve this?
Thanks
Click to expand...
Click to collapse
try to raise cpu voltages for +25mV on each step and try to use some other governor....maybe governor u use cause freezes.....or it might be low ram level and phone get's stuck....
Sent fom my S-II running >>SlimBean build 5 OFFICIAL << powered with DorimanX kernel v. >>9.16<<