I was trying to install kj1 kernal thru heimdall one click I dont know how I messed up on such simple process but now my phone is stuck on a black screen with a pic of cell phone on the left and a yellow triangle with "!" in the middle and a computer on the right, and under it all it says "firmware upgrade encountered an issue. Please select recovery mode in kies and try again."
I have the galaxy s 4g it was running on 2.3.6 when i bought it before trying to flash the kernal
What i did was,
1st i install the java from link, then had phone in download mode ran the one click, hit flash, it looked like it was working and installig the kernal but ended up failing. i den unpluged it from usb and tried to reboot it but it didnt do anything stayd in download mode, so i took out battery n hit the power button then the black screen saying select recovery mode in kies came on. please help i need my phone.
The upshot is you're basically in a download mode. I've never used Heimdall but that's because I'm lazy Try using ODIN 1.85, put the kernel in the PDA section, and flash it. There's a chance you might need to re-flash a ROM to get it going again if just flashing the kernel does not work.
Let me know if you need further assistance.
nvm problem fixed thanks to bhundven, im jus a noob need to pay more attention to wat im doing. HAHA
itsslae said:
nvm problem fixed thanks to bhundven, im jus a noob need to pay more attention to wat im doing. HAHA
Click to expand...
Click to collapse
Cool. Glad you got it working. Bhundven's a cool guy; glad he could help you.
stephen_w said:
Cool. Glad you got it working. Bhundven's a cool guy; glad he could help you.
Click to expand...
Click to collapse
Just in case someone sees this and needs a reference to the help:
http://forum.xda-developers.com/showpost.php?p=20741382&postcount=27
and
http://forum.xda-developers.com/showpost.php?p=20742370&postcount=29
I find that after my phone was UnBrickable Mod'd that I've seen quite a few ways the phone 'soft-bricks' and the funky ways that dl mode and the 'phone <-> computer' screen's behave.
Related
I got a little happy last night and tried tinkering with my SGS, and ended up causing it not to boot up. It currently just sits at the Samsung Galaxy S 4G logo screen, so now I'm just trying to go back to stock and start over.
I do not have odin (still not really sure what it is), but I do have CWM and I've wanted to flash this rom; but towards the end of the thread, some users say not to flash this and to use some other rom with odin instead.
Also, this rom won't even flash in CWM. It just says "installation aborted."
Thanks
I just tried flashing this with Odin, using these instructions, and I just got the bricked screen......
Can someone please help me.
recover a nandroid backup...
If you can't figure out Odin, but can boot into recovery, reinstall packages to get into CWM. Then you can restore to your last nandroid backup.
I can no longer boot into recovery or download. I'm stuck at the screen with the phone and computer with the yellow triangle in between. Odin still recognizes my phone when I plug it in (I think), but that's it. Also, I don't understand what there is to "figure out" about odin anyway. I followed the directions exactly, and the flash simply failed in Odin and when I rebooted, I got stuck at the bricked screen.
Looks like a trip to T-Mobile is in order...
adobrakic said:
I can no longer boot into recovery or download. I'm stuck at the screen with the phone and computer with the yellow triangle in between. Odin still recognizes my phone when I plug it in (I think), but that's it. Also, I don't understand what there is to "figure out" about odin anyway. I followed the directions exactly, and the flash simply failed in Odin and when I rebooted, I got stuck at the bricked screen.
Looks like a trip to T-Mobile is in order...
Click to expand...
Click to collapse
YOU DID NOT BRICK YOUR PHONE!!!!!
when i pulled the cord on my phone during download mode and odin it gave me the same screen as you
THIS DOES NOT MEAN THAT ITS BRICKED
your computer will still recognize your phone and SO WILL ODIN!
that screen is basically another download mode
heres what you do:
download whitehawkx kd1 deodexed
go into download mode like you normally would and plug the phone in
you will notice that odin still recognizes your phone
in odin ONLY press the PDA option and then choose whitehawkx PDA_KD1 file
flash and wait for reset.... then BAM your phone has the new kd1 rom and its not bricked
i promise you the screen your getting doesnt mean a brick, ive seen that screen like 10 times throughout my flashing days
^ omfg man, you seriously just saved my entire Sunday. I have no idea why it didn't work like this when I first tried it, I literally went through the same steps.
Thank you so much.
adobrakic said:
^ omfg man, you seriously just saved my entire Sunday. I have no idea why it didn't work like this when I first tried it, I literally went through the same steps.
Thank you so much.
Click to expand...
Click to collapse
anytime my friend, im glad you didnt have to go to Tmobile
Stuck at Samsung Galaxy S 4G logo screen
Stuck at Samsung Galaxy S 4G logo screen. My phone will go no further. tried pulling the batt, boot to recovery not an option, Any Ideas
Samsung sgs4g 2.2.1 stock
Cheffz said:
Stuck at Samsung Galaxy S 4G logo screen. My phone will go no further. tried pulling the batt, boot to recovery not an option, Any Ideas
Samsung sgs4g 2.2.1 stock
Click to expand...
Click to collapse
yea you need:
Odin
any sgs4g rom like whitehawkx kd1 deodexed
take your battery out, put it back in and hold both the up and down volume buttons, then while holding them down plug your phone into your computer via usb and you will enter DOWNLOAD MODE from there you open odin on your computer and click only the PDA option look for the whitehawkx pda_kd1 file you downloaded and click start
that should fix it
Biggggggggggg Thanks
Sorry but I started a new thread ... before you answered.. my bad.. but on the new thread.. I have a few questions
Have similar problems plz help.
dsexton702 said:
YOU DID NOT BRICK YOUR PHONE!!!!!
when i pulled the cord on my phone during download mode and odin it gave me the same screen as you
THIS DOES NOT MEAN THAT ITS BRICKED
your computer will still recognize your phone and SO WILL ODIN!
that screen is basically another download mode
heres what you do:
download whitehawkx kd1 deodexed
go into download mode like you normally would and plug the phone in
you will notice that odin still recognizes your phone
in odin ONLY press the PDA option and then choose whitehawkx PDA_KD1 file
flash and wait for reset.... then BAM your phone has the new kd1 rom and its not bricked
i promise you the screen your getting doesnt mean a brick, ive seen that screen like 10 times throughout my flashing days
Click to expand...
Click to collapse
My phone wont boot, after i was messing round with some kernel, need hlp plz.
Snappy15 said:
My phone wont boot, after i was messing round with some kernel, need hlp plz.
Click to expand...
Click to collapse
Can you get into either recovery or download mode?
Kyndig66 said:
Can you get into either recovery or download mode?
Click to expand...
Click to collapse
Thnks for responding quickly :good:
i can get in to download mode, recovery mode i cant get to anymore.
Snappy15 said:
Thnks for responding quickly :good:
i can get in to download mode, recovery mode i cant get to anymore.
Click to expand...
Click to collapse
I'm not sure what ROM or kernel combination you're trying, so here are some suggestions:
From FBis251 - http://forum.xda-developers.com/showthread.php?t=1223765
From thomas.raines - http://forum.xda-developers.com/showthread.php?t=1500427
From bhundven - http://forum.xda-developers.com/showthread.php?t=1358498
Specific Instructions for bhundven's heimdall from lumin30 - http://forum.xda-developers.com/showpost.php?p=21953878&postcount=2
Kyndig66 said:
I'm not sure what ROM or kernel combination you're trying, so here are some suggestions:
From FBis251 - http://forum.xda-developers.com/showthread.php?t=1223765
From thomas.raines - http://forum.xda-developers.com/showthread.php?t=1500427
From bhundven - http://forum.xda-developers.com/showthread.php?t=1358498
Specific Instructions for bhundven's heimdall from lumin30 - http://forum.xda-developers.com/showpost.php?p=21953878&postcount=2
Click to expand...
Click to collapse
I was trying before, to get CWM, which worked, but then i couldn't get pass the T-Mobile logo.
Now at the moment i'm in download mode, this one seems quite different because it has a phone icon, with the caution sign in the middle, and the pc at the pc at the right. any more suggestions sir?
Snappy15 said:
I was trying before, to get CWM, which worked, but then i couldn't get pass the T-Mobile logo.
Now at the moment i'm in download mode, this one seems quite different because it has a phone icon, with the caution sign in the middle, and the pc at the pc at the right. any more suggestions sir?
Click to expand...
Click to collapse
Flash it with one of the options you've been linked to by Kyndig. The first two are for Odin the last for Heimdall. That's an alternate DL mode your looking at. It still works the same.
hechoen said:
Flash it with one of the options you've been linked to by Kyndig. The first two are for Odin the last for Heimdall. That's an alternate DL mode your looking at. It still works the same.
Click to expand...
Click to collapse
Thanks it worked.:good:
Hey Guys...
I Have a Concern that I would Like Help with... I am Trying to Install / Restore My Friends Galaxy S 4G to Stock but Once I get Past the FactoryFS and Etc I Get a Fail When it's Time to Write (which is what it states)
Now, I'm a Dev Assistant and a Tester So I Know How to Get Around but Samsung is a bit Harder as it Needs to Be Done via Odin
Any Info on to What Might be Causing this or as to What I Can do to help him resolve this... Every time I Try to Turn on the Phone Now I get the Recovery Menu... I Guess Since Odin was Unsuccessful @ the Writing Point?
I'm Sorry but I'm Lost Here... Thanks In Advance for the Help!
There is a thread up top labelled noobs guide to flashing. It has the stock rom link available.
You will need to run Odin before next step.
You will put the phone into download mode.
Do this by holding down the power up and power down button as you plug in the usb cable.
Your phone should recognize ODIN.
Follow the steps in the Noobs guide to flashing on how to load the files into ODIN.
It is very simple because you dont change any settings in ODIN. You leave it how it is and it really makes flashing back to stock pretty easy
Let me know if you have any questions.
PlankLongBeard said:
Hey Guys...
I Have a Concern that I would Like Help with... I am Trying to Install / Restore My Friends Galaxy S 4G to Stock but Once I get Past the FactoryFS and Etc I Get a Fail When it's Time to Write (which is what it states)
Now, I'm a Dev Assistant and a Tester So I Know How to Get Around but Samsung is a bit Harder as it Needs to Be Done via Odin
Any Info on to What Might be Causing this or as to What I Can do to help him resolve this... Every time I Try to Turn on the Phone Now I get the Recovery Menu... I Guess Since Odin was Unsuccessful @ the Writing Point?
I'm Sorry but I'm Lost Here... Thanks In Advance for the Help!
Click to expand...
Click to collapse
Try different usb slot
Sent from my SGH-T959V using XDA Premium App
So I actually have a similar problem but I get a FAIL every time I go through the process. Here is what I have tried:
1) Tried to root with ODIN and sent my phone into an endless boot with funky colored dots after boot screen. Apparently i failed.
2) Tried flashing with ODIN KD1 deodexed rom referenced in another xda thread about how to unbrick a galaxy s 4g. This quickly sent up the FAIL box in red in ODIN and then my phone was solidy bricked -> black screen with an arrow from a cell phone to a computer.
3) Used the One-click unbrick tool here http://forum.xda-developers.com/showthread.php?p=15330252#post15330252
4) This one-click too solved my black screen problem but now i'm back to the endless boot. I can still enter into download mode but not recovery.
I have been working on this all day without any luck, so I hope someone is willing to help. Thanks
jigglynuts said:
There is a thread up top labelled noobs guide to flashing. It has the stock rom link available.
You will need to run Odin before next step.
You will put the phone into download mode.
Do this by holding down the power up and power down button as you plug in the usb cable.
Your phone should recognize ODIN.
Follow the steps in the Noobs guide to flashing on how to load the files into ODIN.
It is very simple because you dont change any settings in ODIN. You leave it how it is and it really makes flashing back to stock pretty easy
Let me know if you have any questions.
Click to expand...
Click to collapse
dingurupa said:
So I actually have a similar problem but I get a FAIL every time I go through the process. Here is what I have tried:
1) Tried to root with ODIN and sent my phone into an endless boot with funky colored dots after boot screen. Apparently i failed.
2) Tried flashing with ODIN KD1 deodexed rom referenced in another xda thread about how to unbrick a galaxy s 4g. This quickly sent up the FAIL box in red in ODIN and then my phone was solidy bricked -> black screen with an arrow from a cell phone to a computer.
3) Used the One-click unbrick tool here http://forum.xda-developers.com/showthread.php?p=15330252#post15330252
4) This one-click too solved my black screen problem but now i'm back to the endless boot. I can still enter into download mode but not recovery.
I have been working on this all day without any luck, so I hope someone is willing to help. Thanks
Click to expand...
Click to collapse
You will not need to enter recovery only download so that is ok.
Make sure you have the correct drivers for your phone installed on your computer. Also make sure you have ODIN running before you enter download mode.
I have had instances in the past where I had to reinstall ODIN and restart my computer before it would flash as well.
Let me know if you have any questions or need to know what files I use.
So I think I have the correct drivers installed on my computer but I could be wrong I suppose. The computer seems to recognize my phone fine so I think it's OK. Is there anyway to double check this?
I'm also not sure if I'm using the proper rom for flashing in ODIN. Thanks for offering to help.
jigglynuts said:
You will not need to enter recovery only download so that is ok.
Make sure you have the correct drivers for your phone installed on your computer. Also make sure you have ODIN running before you enter download mode.
I have had instances in the past where I had to reinstall ODIN and restart my computer before it would flash as well.
Let me know if you have any questions or need to know what files I use.
Click to expand...
Click to collapse
If it is recognizing the phone it should be alright.
I would personally use [ROM-ODIN]T959VUVKB5 Stock + Root which can be found in ALL ROMS thread in dev section.
Once you have it downloaded take all the previously mentioned steps.
Run Odin... download mode.... etc.
Dont change any of ODINS settings.
Go down Odins list and upload the files to the correlating places. If it does not work PM me and we will figure out whats happening.
Trying this now. Thank you so much for your help.
jigglynuts said:
If it is recognizing the phone it should be alright.
I would personally use [ROM-ODIN]T959VUVKB5 Stock + Root which can be found in ALL ROMS thread in dev section.
Once you have it downloaded take all the previously mentioned steps.
Run Odin... download mode.... etc.
Dont change any of ODINS settings.
Go down Odins list and upload the files to the correlating places. If it does not work PM me and we will figure out whats happening.
Click to expand...
Click to collapse
KB5 is good, but i would recommend raver's KC1. it will clean up all problems that have accumulated from the bad flashes.
So I already flashed KB5. I would like to upgrade the phone to 2.3.5 if possible now, or is this a bad idea with all the bad flashes?
jager555 said:
KB5 is good, but i would recommend raver's KC1. it will clean up all problems that have accumulated from the bad flashes.
Click to expand...
Click to collapse
---------- Post added at 10:42 AM ---------- Previous post was at 09:55 AM ----------
So I did a little more homework and it appears that I need to flash something like KG4 through ODIN? Once I have done this I can flash Valhalla, which appears to be the most popular/stable release.
just search for fbis251's GB start pack. that is all you need to follow. read the whole op first before doing anything.
jager555 said:
just search for fbis251's GB start pack. that is all you need to follow. read the whole op first before doing anything.
Click to expand...
Click to collapse
Click on the link in my signature as jager said.
Thanks for pointing me in the right direction guys.
First,sr for my bad english.
Yesterday at noon,i was trying to get to JFD on Odin,but the phone keep rebooting after i did that,so i did a master clear,but i waited for 30 minutes and nothing happened(the yellow bar still appeared through..),so i pulled the usb cable out and then i tried to get to download mode again,but nothing came up.I tried using all the methods that i read,but still could not get into download mode or boot the phone up.So i'm very scared right now.
I hope that you will help me solve this problem.
alonecat said:
First,sr for my bad english.
Yesterday at noon,i was trying to get to JFD on Odin,but the phone keep rebooting after i did that,so i did a master clear,but i waited for 30 minutes and nothing happened(the yellow bar still appeared through..),so i pulled the usb cable out and then i tried to get to download mode again,but nothing came up.I tried using all the methods that i read,but still could not get into download mode or boot the phone up.So i'm very scared right now.
I hope that you will help me solve this problem.
Click to expand...
Click to collapse
Are you on a Galaxy S 4G? I believe JFD is a ROM for the Vibrant, not the SGS 4G.
If you did, you might want to try AdamOutler's unbrickable mod:
http://forum.xda-developers.com/showthread.php?t=1333424&highlight=unbrickable
is there an easier way to fix it im running windows so i cannot use unbrickable resurector,and i dont have any experience with fixing hardware
alonecat said:
is there an easier way to fix it im running windows so i cannot use unbrickable resurector,and i dont have any experience with fixing hardware
Click to expand...
Click to collapse
I really wish I knew of another way. You could try searching the forums a bit; there might be a way, but usually if the wrong boot loaders were installed you'd have to follow the link I sent, use a jig (which I know nothing about) or something of that nature.
I wish you luck.
What phone do u have?
i posted in this box so obliviously i have a SSGS4GT.T
Umm,can i ask u one more question?
Can i use JIG to trick the phone go into Download mode?_?.
Hi folks,
I've been trying to install custom Rom using Odin to support a language which is not supported with android gingerbread 2.3.5! and it failed after boot.bin...Now, I'm stuck in the Phone---!---PC screen.
I am trying to get into download mode to be able to return to stock using this
Return to stock, fix soft brick :: 11/13: Rogers TAR!
my question: Could I flash while am on "Phone---!---Pc" screen?how can I get rid of "Phone---!---Pc" screen? or should I get USB jig to force into download mode? is it the best solution to restore to stock?
any help would be greatly appreciated !
If you cant get into download mode u need a jig order this http://forum.xda-developers.com/showthread.php?t=954458
SII_LTE_User said:
Hi folks,
I've been trying to install custom Rom using Odin to support a language which is not supported with android gingerbread 2.3.5! and it failed after boot.bin...Now, I'm stuck in the Phone---!---PC screen.
I am trying to get into download mode to be able to return to stock using this
Return to stock, fix soft brick :: 11/13: Rogers TAR!
my question: Could I flash while am on "Phone---!---Pc" screen?how can I get rid of "Phone---!---Pc" screen? or should I get USB jig to force into download mode? is it the best solution to restore to stock?
any help would be greatly appreciated !
Click to expand...
Click to collapse
Even if your phone is shown the "Phone---!---PC" screen .. ODIN should still recognize it being attached to your computer .. My first SGS2 Skyrocket did this in which I was able to reflash back to stock using ODIN v1.85 .. however, my first SGS2 took a real crapper for some reason .. that even the USB JIG was unable to get the phone into Download Mode.
I now have a replacement in which I'm being REAL careful with .. LOL
LordGeek said:
Even if your phone is shown the "Phone---!---PC" screen .. ODIN should still recognize it being attached to your computer .. My first SGS2 Skyrocket did this in which I was able to reflash back to stock using ODIN v1.85 .. however, my first SGS2 took a real crapper for some reason .. that even the USB JIG was unable to get the phone into Download Mode.
I now have a replacement in which I'm being REAL careful with .. LOL
Click to expand...
Click to collapse
Actually Odin is recognizing the phone..but im not sure if flashing will work since its not in download mode!!! dont wanna go further doing wrong steps!
SII_LTE_User said:
Actually Odin is recognizing the phone..but im not sure if flashing will work since its not in download mode!!! dont wanna go further doing wrong steps!
Click to expand...
Click to collapse
You're safe .. put the TAR under PDA .. uncheck everything in ODIN except Reboot and let it rip.
LordGeek said:
You're safe .. put the TAR under PDA .. uncheck everything in ODIN except Reboot and let it rip.
Click to expand...
Click to collapse
This will work.......DOOOO IT
Sent from my SAMSUNG-SGH-I727 using xda premium
You should be able to get into download mode by just holding volume down you may need to push the power button while holding it
Sent from my SGH-I727R using XDA App
LordGeek said:
You're safe .. put the TAR under PDA .. uncheck everything in ODIN except Reboot and let it rip.
Click to expand...
Click to collapse
the2rrell said:
This will work.......DOOOO IT
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Thanks ALOT...You guyz Rock....I flashed and it's baaaack up and running without even losing my data
So for those who are stuck in same scenario...
YES you can flash with ODIN if you're stuck in Phone--!--PC...I used Return to stock, fix soft brick :: 11/13: Rogers TAR!
-Downloaded I727R tar
-opened Odin v1.85
-turned on my phone(showed the exclamation mark screen)
-Connected to Pc with Usb
-odin recognized it...put .tar file in PDA and hit Start et Voila!
Hope this helps anyone in same situation!
Help
I have tried to root my phone and I can't get it to get past the boot screen. I can get it to the download screen but I cant get anywhere past that...please help. I need step by step instructions please.
Go here it has the step by step instructions. http://forum.xda-developers.com/showthread.php?t=1342348
Okay so I am having a similar problem. My phone will boot up and it says the "downloading a different os .... and then press volume up to continue and volume down to reboot" and when i press volume up i get a screen saying "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again". What do i do? Please and thanks
Do you have usb Jig. If no than you can make ur own. Let me find you solution to ur problem. And if you have any other device that uses micro usb than try plugging the usb cable to ur phone and see if thats gets u in dload mode.
ckck543 said:
Okay so I am having a similar problem. My phone will boot up and it says the "downloading a different os .... and then press volume up to continue and volume down to reboot" and when i press volume up i get a screen saying "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again". What do i do? Please and thanks
Click to expand...
Click to collapse
Morning y'all... having a similar problem... I was rooted but for some reason when in Recovery I'd only get Android Recovery??? I got CWM installed using ODIN (This is the tread I used... http://forum.xda-developers.com/showthread.php?t=1340526) . Then I went and tried to install miuiscotland_I9100-2.1.13... said install was complete... went to reboot from CWN... and nothing.
I tried pulling battery, going into recovery, download mode, the jig... and nothing... doesn't even look like it's charging... no spark at all?
So I have no phone as it stands right now.
Any comments, suggestions, hints, tips, tricks?
Thx.
B.
Rogers
Galaxy S II LTE
SGH-I727R
Kernel V: 2.6.35.11
I see that instructions are step by step but I have a phone that wont let me put it in download mode. My phone wont hookup to my computer. I need help....
---------- Post added at 10:05 AM ---------- Previous post was at 09:51 AM ----------
I see that instructions are step by step but I have a phone that wont let me put it in download mode. My phone wont hookup to my computer. I need help....
K9kazoo said:
Morning y'all... having a similar problem... I was rooted but for some reason when in Recovery I'd only get Android Recovery??? I got CWM installed using ODIN (This is the tread I used... http://forum.xda-developers.com/showthread.php?t=1340526) . Then I went and tried to install miuiscotland_I9100-2.1.13... said install was complete... went to reboot from CWN... and nothing.
I tried pulling battery, going into recovery, download mode, the jig... and nothing... doesn't even look like it's charging... no spark at all?
So I have no phone as it stands right now.
Any comments, suggestions, hints, tips, tricks?
Thx.
B.
Rogers
Galaxy S II LTE
SGH-I727R
Kernel V: 2.6.35.11
Click to expand...
Click to collapse
You are hard bricked. You flashed a i9100 rom over a i727 device.
Only advice I can give is drop it in the toilet if you have insurance on the phone and get a replacement, or call your carrier's warranty department and tell them your phone just stopped working (not particularly ethical and you could get caught if they figure out it was rooted, but worth a shot...).
Oh, and the other advice is NEVER flash roms meant for devices other than the Skyrocket. Roms meant for the original S2 will brick your phone.
---------- Post added at 09:55 PM ---------- Previous post was at 09:51 PM ----------
appdroid said:
Do you have usb Jig. If no than you can make ur own. Let me find you solution to ur problem. And if you have any other device that uses micro usb than try plugging the usb cable to ur phone and see if thats gets u in dload mode.
Click to expand...
Click to collapse
No need for a jig here (though it is good to have one anyways). If you get the "firmware upgrade failed" screen, just plug the phone in and if Odin sees your phone you can flash the stock tar. The "failed" screen won't look like it's doing anything but after Odin finishes you will be back to stock and life will be good again.
Hey guys i think that I bricked this thing . It is rooted, and I wasn't doing anything to it, and all of a sudden one day, it turned itself off. I went to turn it on, and it got stuck in a bootloop. I flashed a new rom to fix it, and it worked fine, but I flashed a different modem (kf4 i believe?) and It's supposed to be kd1 I think. Anyway, I can't even get into recovery mode at this point, or even download mode. The only think that comes up is "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" Whenever I connect it to kies it just hangs on "connecting" please any help appreciated thank you so much. :crying:
There should be threads and/or wiki pages on how to get into download mode.
You'll probably want the one-click back-to-stock
Depending on what ROM you flashed, you may need the Google USB drivers if you are on Windows.
Posted from my AOKP-ified SGS4G
That is also a download mode. You can use heimdall to one-click back to stock. Click on the purple link in my signature and follow the directions.
Hey guys thanks for the replies, but I can't get into download mode. the only thing i can do is see this screen
tstrat19191 said:
Hey guys thanks for the replies, but I can't get into download mode. the only thing i can do is see this screen
Click to expand...
Click to collapse
That is a alternative download mode. Heimdall should recognize it.
oh ok thanks
eollie said:
That is also a download mode. You can use heimdall to one-click back to stock. Click on the purple link in my signature and follow the directions.
Click to expand...
Click to collapse
Oh ok thanks, I'm downloading the file right now
eollie said:
That is a alternative download mode. Heimdall should recognize it.
Click to expand...
Click to collapse
The driver download keeps timing out