I got a little happy last night and tried tinkering with my SGS, and ended up causing it not to boot up. It currently just sits at the Samsung Galaxy S 4G logo screen, so now I'm just trying to go back to stock and start over.
I do not have odin (still not really sure what it is), but I do have CWM and I've wanted to flash this rom; but towards the end of the thread, some users say not to flash this and to use some other rom with odin instead.
Also, this rom won't even flash in CWM. It just says "installation aborted."
Thanks
I just tried flashing this with Odin, using these instructions, and I just got the bricked screen......
Can someone please help me.
recover a nandroid backup...
If you can't figure out Odin, but can boot into recovery, reinstall packages to get into CWM. Then you can restore to your last nandroid backup.
I can no longer boot into recovery or download. I'm stuck at the screen with the phone and computer with the yellow triangle in between. Odin still recognizes my phone when I plug it in (I think), but that's it. Also, I don't understand what there is to "figure out" about odin anyway. I followed the directions exactly, and the flash simply failed in Odin and when I rebooted, I got stuck at the bricked screen.
Looks like a trip to T-Mobile is in order...
adobrakic said:
I can no longer boot into recovery or download. I'm stuck at the screen with the phone and computer with the yellow triangle in between. Odin still recognizes my phone when I plug it in (I think), but that's it. Also, I don't understand what there is to "figure out" about odin anyway. I followed the directions exactly, and the flash simply failed in Odin and when I rebooted, I got stuck at the bricked screen.
Looks like a trip to T-Mobile is in order...
Click to expand...
Click to collapse
YOU DID NOT BRICK YOUR PHONE!!!!!
when i pulled the cord on my phone during download mode and odin it gave me the same screen as you
THIS DOES NOT MEAN THAT ITS BRICKED
your computer will still recognize your phone and SO WILL ODIN!
that screen is basically another download mode
heres what you do:
download whitehawkx kd1 deodexed
go into download mode like you normally would and plug the phone in
you will notice that odin still recognizes your phone
in odin ONLY press the PDA option and then choose whitehawkx PDA_KD1 file
flash and wait for reset.... then BAM your phone has the new kd1 rom and its not bricked
i promise you the screen your getting doesnt mean a brick, ive seen that screen like 10 times throughout my flashing days
^ omfg man, you seriously just saved my entire Sunday. I have no idea why it didn't work like this when I first tried it, I literally went through the same steps.
Thank you so much.
adobrakic said:
^ omfg man, you seriously just saved my entire Sunday. I have no idea why it didn't work like this when I first tried it, I literally went through the same steps.
Thank you so much.
Click to expand...
Click to collapse
anytime my friend, im glad you didnt have to go to Tmobile
Stuck at Samsung Galaxy S 4G logo screen
Stuck at Samsung Galaxy S 4G logo screen. My phone will go no further. tried pulling the batt, boot to recovery not an option, Any Ideas
Samsung sgs4g 2.2.1 stock
Cheffz said:
Stuck at Samsung Galaxy S 4G logo screen. My phone will go no further. tried pulling the batt, boot to recovery not an option, Any Ideas
Samsung sgs4g 2.2.1 stock
Click to expand...
Click to collapse
yea you need:
Odin
any sgs4g rom like whitehawkx kd1 deodexed
take your battery out, put it back in and hold both the up and down volume buttons, then while holding them down plug your phone into your computer via usb and you will enter DOWNLOAD MODE from there you open odin on your computer and click only the PDA option look for the whitehawkx pda_kd1 file you downloaded and click start
that should fix it
Biggggggggggg Thanks
Sorry but I started a new thread ... before you answered.. my bad.. but on the new thread.. I have a few questions
Have similar problems plz help.
dsexton702 said:
YOU DID NOT BRICK YOUR PHONE!!!!!
when i pulled the cord on my phone during download mode and odin it gave me the same screen as you
THIS DOES NOT MEAN THAT ITS BRICKED
your computer will still recognize your phone and SO WILL ODIN!
that screen is basically another download mode
heres what you do:
download whitehawkx kd1 deodexed
go into download mode like you normally would and plug the phone in
you will notice that odin still recognizes your phone
in odin ONLY press the PDA option and then choose whitehawkx PDA_KD1 file
flash and wait for reset.... then BAM your phone has the new kd1 rom and its not bricked
i promise you the screen your getting doesnt mean a brick, ive seen that screen like 10 times throughout my flashing days
Click to expand...
Click to collapse
My phone wont boot, after i was messing round with some kernel, need hlp plz.
Snappy15 said:
My phone wont boot, after i was messing round with some kernel, need hlp plz.
Click to expand...
Click to collapse
Can you get into either recovery or download mode?
Kyndig66 said:
Can you get into either recovery or download mode?
Click to expand...
Click to collapse
Thnks for responding quickly :good:
i can get in to download mode, recovery mode i cant get to anymore.
Snappy15 said:
Thnks for responding quickly :good:
i can get in to download mode, recovery mode i cant get to anymore.
Click to expand...
Click to collapse
I'm not sure what ROM or kernel combination you're trying, so here are some suggestions:
From FBis251 - http://forum.xda-developers.com/showthread.php?t=1223765
From thomas.raines - http://forum.xda-developers.com/showthread.php?t=1500427
From bhundven - http://forum.xda-developers.com/showthread.php?t=1358498
Specific Instructions for bhundven's heimdall from lumin30 - http://forum.xda-developers.com/showpost.php?p=21953878&postcount=2
Kyndig66 said:
I'm not sure what ROM or kernel combination you're trying, so here are some suggestions:
From FBis251 - http://forum.xda-developers.com/showthread.php?t=1223765
From thomas.raines - http://forum.xda-developers.com/showthread.php?t=1500427
From bhundven - http://forum.xda-developers.com/showthread.php?t=1358498
Specific Instructions for bhundven's heimdall from lumin30 - http://forum.xda-developers.com/showpost.php?p=21953878&postcount=2
Click to expand...
Click to collapse
I was trying before, to get CWM, which worked, but then i couldn't get pass the T-Mobile logo.
Now at the moment i'm in download mode, this one seems quite different because it has a phone icon, with the caution sign in the middle, and the pc at the pc at the right. any more suggestions sir?
Snappy15 said:
I was trying before, to get CWM, which worked, but then i couldn't get pass the T-Mobile logo.
Now at the moment i'm in download mode, this one seems quite different because it has a phone icon, with the caution sign in the middle, and the pc at the pc at the right. any more suggestions sir?
Click to expand...
Click to collapse
Flash it with one of the options you've been linked to by Kyndig. The first two are for Odin the last for Heimdall. That's an alternate DL mode your looking at. It still works the same.
hechoen said:
Flash it with one of the options you've been linked to by Kyndig. The first two are for Odin the last for Heimdall. That's an alternate DL mode your looking at. It still works the same.
Click to expand...
Click to collapse
Thanks it worked.:good:
Related
Hey Guys...
I Have a Concern that I would Like Help with... I am Trying to Install / Restore My Friends Galaxy S 4G to Stock but Once I get Past the FactoryFS and Etc I Get a Fail When it's Time to Write (which is what it states)
Now, I'm a Dev Assistant and a Tester So I Know How to Get Around but Samsung is a bit Harder as it Needs to Be Done via Odin
Any Info on to What Might be Causing this or as to What I Can do to help him resolve this... Every time I Try to Turn on the Phone Now I get the Recovery Menu... I Guess Since Odin was Unsuccessful @ the Writing Point?
I'm Sorry but I'm Lost Here... Thanks In Advance for the Help!
There is a thread up top labelled noobs guide to flashing. It has the stock rom link available.
You will need to run Odin before next step.
You will put the phone into download mode.
Do this by holding down the power up and power down button as you plug in the usb cable.
Your phone should recognize ODIN.
Follow the steps in the Noobs guide to flashing on how to load the files into ODIN.
It is very simple because you dont change any settings in ODIN. You leave it how it is and it really makes flashing back to stock pretty easy
Let me know if you have any questions.
PlankLongBeard said:
Hey Guys...
I Have a Concern that I would Like Help with... I am Trying to Install / Restore My Friends Galaxy S 4G to Stock but Once I get Past the FactoryFS and Etc I Get a Fail When it's Time to Write (which is what it states)
Now, I'm a Dev Assistant and a Tester So I Know How to Get Around but Samsung is a bit Harder as it Needs to Be Done via Odin
Any Info on to What Might be Causing this or as to What I Can do to help him resolve this... Every time I Try to Turn on the Phone Now I get the Recovery Menu... I Guess Since Odin was Unsuccessful @ the Writing Point?
I'm Sorry but I'm Lost Here... Thanks In Advance for the Help!
Click to expand...
Click to collapse
Try different usb slot
Sent from my SGH-T959V using XDA Premium App
So I actually have a similar problem but I get a FAIL every time I go through the process. Here is what I have tried:
1) Tried to root with ODIN and sent my phone into an endless boot with funky colored dots after boot screen. Apparently i failed.
2) Tried flashing with ODIN KD1 deodexed rom referenced in another xda thread about how to unbrick a galaxy s 4g. This quickly sent up the FAIL box in red in ODIN and then my phone was solidy bricked -> black screen with an arrow from a cell phone to a computer.
3) Used the One-click unbrick tool here http://forum.xda-developers.com/showthread.php?p=15330252#post15330252
4) This one-click too solved my black screen problem but now i'm back to the endless boot. I can still enter into download mode but not recovery.
I have been working on this all day without any luck, so I hope someone is willing to help. Thanks
jigglynuts said:
There is a thread up top labelled noobs guide to flashing. It has the stock rom link available.
You will need to run Odin before next step.
You will put the phone into download mode.
Do this by holding down the power up and power down button as you plug in the usb cable.
Your phone should recognize ODIN.
Follow the steps in the Noobs guide to flashing on how to load the files into ODIN.
It is very simple because you dont change any settings in ODIN. You leave it how it is and it really makes flashing back to stock pretty easy
Let me know if you have any questions.
Click to expand...
Click to collapse
dingurupa said:
So I actually have a similar problem but I get a FAIL every time I go through the process. Here is what I have tried:
1) Tried to root with ODIN and sent my phone into an endless boot with funky colored dots after boot screen. Apparently i failed.
2) Tried flashing with ODIN KD1 deodexed rom referenced in another xda thread about how to unbrick a galaxy s 4g. This quickly sent up the FAIL box in red in ODIN and then my phone was solidy bricked -> black screen with an arrow from a cell phone to a computer.
3) Used the One-click unbrick tool here http://forum.xda-developers.com/showthread.php?p=15330252#post15330252
4) This one-click too solved my black screen problem but now i'm back to the endless boot. I can still enter into download mode but not recovery.
I have been working on this all day without any luck, so I hope someone is willing to help. Thanks
Click to expand...
Click to collapse
You will not need to enter recovery only download so that is ok.
Make sure you have the correct drivers for your phone installed on your computer. Also make sure you have ODIN running before you enter download mode.
I have had instances in the past where I had to reinstall ODIN and restart my computer before it would flash as well.
Let me know if you have any questions or need to know what files I use.
So I think I have the correct drivers installed on my computer but I could be wrong I suppose. The computer seems to recognize my phone fine so I think it's OK. Is there anyway to double check this?
I'm also not sure if I'm using the proper rom for flashing in ODIN. Thanks for offering to help.
jigglynuts said:
You will not need to enter recovery only download so that is ok.
Make sure you have the correct drivers for your phone installed on your computer. Also make sure you have ODIN running before you enter download mode.
I have had instances in the past where I had to reinstall ODIN and restart my computer before it would flash as well.
Let me know if you have any questions or need to know what files I use.
Click to expand...
Click to collapse
If it is recognizing the phone it should be alright.
I would personally use [ROM-ODIN]T959VUVKB5 Stock + Root which can be found in ALL ROMS thread in dev section.
Once you have it downloaded take all the previously mentioned steps.
Run Odin... download mode.... etc.
Dont change any of ODINS settings.
Go down Odins list and upload the files to the correlating places. If it does not work PM me and we will figure out whats happening.
Trying this now. Thank you so much for your help.
jigglynuts said:
If it is recognizing the phone it should be alright.
I would personally use [ROM-ODIN]T959VUVKB5 Stock + Root which can be found in ALL ROMS thread in dev section.
Once you have it downloaded take all the previously mentioned steps.
Run Odin... download mode.... etc.
Dont change any of ODINS settings.
Go down Odins list and upload the files to the correlating places. If it does not work PM me and we will figure out whats happening.
Click to expand...
Click to collapse
KB5 is good, but i would recommend raver's KC1. it will clean up all problems that have accumulated from the bad flashes.
So I already flashed KB5. I would like to upgrade the phone to 2.3.5 if possible now, or is this a bad idea with all the bad flashes?
jager555 said:
KB5 is good, but i would recommend raver's KC1. it will clean up all problems that have accumulated from the bad flashes.
Click to expand...
Click to collapse
---------- Post added at 10:42 AM ---------- Previous post was at 09:55 AM ----------
So I did a little more homework and it appears that I need to flash something like KG4 through ODIN? Once I have done this I can flash Valhalla, which appears to be the most popular/stable release.
just search for fbis251's GB start pack. that is all you need to follow. read the whole op first before doing anything.
jager555 said:
just search for fbis251's GB start pack. that is all you need to follow. read the whole op first before doing anything.
Click to expand...
Click to collapse
Click on the link in my signature as jager said.
Thanks for pointing me in the right direction guys.
Hi folks,
I've been trying to install custom Rom using Odin to support a language which is not supported with android gingerbread 2.3.5! and it failed after boot.bin...Now, I'm stuck in the Phone---!---PC screen.
I am trying to get into download mode to be able to return to stock using this
Return to stock, fix soft brick :: 11/13: Rogers TAR!
my question: Could I flash while am on "Phone---!---Pc" screen?how can I get rid of "Phone---!---Pc" screen? or should I get USB jig to force into download mode? is it the best solution to restore to stock?
any help would be greatly appreciated !
If you cant get into download mode u need a jig order this http://forum.xda-developers.com/showthread.php?t=954458
SII_LTE_User said:
Hi folks,
I've been trying to install custom Rom using Odin to support a language which is not supported with android gingerbread 2.3.5! and it failed after boot.bin...Now, I'm stuck in the Phone---!---PC screen.
I am trying to get into download mode to be able to return to stock using this
Return to stock, fix soft brick :: 11/13: Rogers TAR!
my question: Could I flash while am on "Phone---!---Pc" screen?how can I get rid of "Phone---!---Pc" screen? or should I get USB jig to force into download mode? is it the best solution to restore to stock?
any help would be greatly appreciated !
Click to expand...
Click to collapse
Even if your phone is shown the "Phone---!---PC" screen .. ODIN should still recognize it being attached to your computer .. My first SGS2 Skyrocket did this in which I was able to reflash back to stock using ODIN v1.85 .. however, my first SGS2 took a real crapper for some reason .. that even the USB JIG was unable to get the phone into Download Mode.
I now have a replacement in which I'm being REAL careful with .. LOL
LordGeek said:
Even if your phone is shown the "Phone---!---PC" screen .. ODIN should still recognize it being attached to your computer .. My first SGS2 Skyrocket did this in which I was able to reflash back to stock using ODIN v1.85 .. however, my first SGS2 took a real crapper for some reason .. that even the USB JIG was unable to get the phone into Download Mode.
I now have a replacement in which I'm being REAL careful with .. LOL
Click to expand...
Click to collapse
Actually Odin is recognizing the phone..but im not sure if flashing will work since its not in download mode!!! dont wanna go further doing wrong steps!
SII_LTE_User said:
Actually Odin is recognizing the phone..but im not sure if flashing will work since its not in download mode!!! dont wanna go further doing wrong steps!
Click to expand...
Click to collapse
You're safe .. put the TAR under PDA .. uncheck everything in ODIN except Reboot and let it rip.
LordGeek said:
You're safe .. put the TAR under PDA .. uncheck everything in ODIN except Reboot and let it rip.
Click to expand...
Click to collapse
This will work.......DOOOO IT
Sent from my SAMSUNG-SGH-I727 using xda premium
You should be able to get into download mode by just holding volume down you may need to push the power button while holding it
Sent from my SGH-I727R using XDA App
LordGeek said:
You're safe .. put the TAR under PDA .. uncheck everything in ODIN except Reboot and let it rip.
Click to expand...
Click to collapse
the2rrell said:
This will work.......DOOOO IT
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Thanks ALOT...You guyz Rock....I flashed and it's baaaack up and running without even losing my data
So for those who are stuck in same scenario...
YES you can flash with ODIN if you're stuck in Phone--!--PC...I used Return to stock, fix soft brick :: 11/13: Rogers TAR!
-Downloaded I727R tar
-opened Odin v1.85
-turned on my phone(showed the exclamation mark screen)
-Connected to Pc with Usb
-odin recognized it...put .tar file in PDA and hit Start et Voila!
Hope this helps anyone in same situation!
Help
I have tried to root my phone and I can't get it to get past the boot screen. I can get it to the download screen but I cant get anywhere past that...please help. I need step by step instructions please.
Go here it has the step by step instructions. http://forum.xda-developers.com/showthread.php?t=1342348
Okay so I am having a similar problem. My phone will boot up and it says the "downloading a different os .... and then press volume up to continue and volume down to reboot" and when i press volume up i get a screen saying "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again". What do i do? Please and thanks
Do you have usb Jig. If no than you can make ur own. Let me find you solution to ur problem. And if you have any other device that uses micro usb than try plugging the usb cable to ur phone and see if thats gets u in dload mode.
ckck543 said:
Okay so I am having a similar problem. My phone will boot up and it says the "downloading a different os .... and then press volume up to continue and volume down to reboot" and when i press volume up i get a screen saying "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again". What do i do? Please and thanks
Click to expand...
Click to collapse
Morning y'all... having a similar problem... I was rooted but for some reason when in Recovery I'd only get Android Recovery??? I got CWM installed using ODIN (This is the tread I used... http://forum.xda-developers.com/showthread.php?t=1340526) . Then I went and tried to install miuiscotland_I9100-2.1.13... said install was complete... went to reboot from CWN... and nothing.
I tried pulling battery, going into recovery, download mode, the jig... and nothing... doesn't even look like it's charging... no spark at all?
So I have no phone as it stands right now.
Any comments, suggestions, hints, tips, tricks?
Thx.
B.
Rogers
Galaxy S II LTE
SGH-I727R
Kernel V: 2.6.35.11
I see that instructions are step by step but I have a phone that wont let me put it in download mode. My phone wont hookup to my computer. I need help....
---------- Post added at 10:05 AM ---------- Previous post was at 09:51 AM ----------
I see that instructions are step by step but I have a phone that wont let me put it in download mode. My phone wont hookup to my computer. I need help....
K9kazoo said:
Morning y'all... having a similar problem... I was rooted but for some reason when in Recovery I'd only get Android Recovery??? I got CWM installed using ODIN (This is the tread I used... http://forum.xda-developers.com/showthread.php?t=1340526) . Then I went and tried to install miuiscotland_I9100-2.1.13... said install was complete... went to reboot from CWN... and nothing.
I tried pulling battery, going into recovery, download mode, the jig... and nothing... doesn't even look like it's charging... no spark at all?
So I have no phone as it stands right now.
Any comments, suggestions, hints, tips, tricks?
Thx.
B.
Rogers
Galaxy S II LTE
SGH-I727R
Kernel V: 2.6.35.11
Click to expand...
Click to collapse
You are hard bricked. You flashed a i9100 rom over a i727 device.
Only advice I can give is drop it in the toilet if you have insurance on the phone and get a replacement, or call your carrier's warranty department and tell them your phone just stopped working (not particularly ethical and you could get caught if they figure out it was rooted, but worth a shot...).
Oh, and the other advice is NEVER flash roms meant for devices other than the Skyrocket. Roms meant for the original S2 will brick your phone.
---------- Post added at 09:55 PM ---------- Previous post was at 09:51 PM ----------
appdroid said:
Do you have usb Jig. If no than you can make ur own. Let me find you solution to ur problem. And if you have any other device that uses micro usb than try plugging the usb cable to ur phone and see if thats gets u in dload mode.
Click to expand...
Click to collapse
No need for a jig here (though it is good to have one anyways). If you get the "firmware upgrade failed" screen, just plug the phone in and if Odin sees your phone you can flash the stock tar. The "failed" screen won't look like it's doing anything but after Odin finishes you will be back to stock and life will be good again.
Please help me. My Infuse 4G doesn't boot. All I see was light on the button. This what happened. I want to go back to stock and use [ODIN][UCKE3] Return to stock (Updated 06/08/11) by gtg465x . I right click on Odin and run as Admin. Odin see my phone on a download mode. I select infuse.pit on PIT, PDA in Pda, and Phone in Phone. then click Start. It got stuck at factory.fs (don't remember the name actual name). It stuck there for so long, maybe like an hour. Then I decide to unplug and pull battery out. close the Odin and redo the step again. This time the status bar went half way and then got stuck again. I left it overnight just to see if it's actually finish and it never did. Just stuck there. Turn the phone on and i only see light on the button. Is my phone dead? I can still able to get to download mode but the phone won't boot.
I done return to stock so many times and was successful. This was the first encounter I had where Odin stuck and never complete it flashing.
Try things like reinstalling the drivers, another pc, another usb cable etc.
Thanks. Will try that and also i will try this [ODIN][UCKD5] Odin - Stock (100% or Root+3e) - (Update 06/05/11) since on FAQ #4 seem to be in my case. But if members had other recommendation, please post. thx in advance
cat2115 said:
Thanks. Will try that and also i will try this [ODIN][UCKD5] Odin - Stock (100% or Root+3e) - (Update 06/05/11) since on FAQ #4 seem to be in my case. But if members had other recommendation, please post. thx in advance
Click to expand...
Click to collapse
Getting stuck on the factory.fs is pretty common here. You might try charging for a bit to see if you can get it to show signs of life. And that link up there^^^(UCKD5 Stock+Root+3e) has worked for me when gtg's didn't. Read the instructions for it carefully as you don't have to check as many boxes. You only need to load the file into the PDA slot. Also if you didn't have the drivers installed your phone wouldn't show up, so that's not your problem (although you could try re-installing them for **** and giggles)...
If THAT doesn't work try Adam's Heimdall one click HERE
If all else fails try a different PC. I had to and it worked like a charm.
Good Luck
Just my 2ยข
Sent from my SAMSUNG-SGH-I997 using XDA App
I had a similar problem last week I tried on my dads computer, nothing, then went to my computer since my computer had the drivers already on it cuz I used it to put music on my sd card it read it fine and they process went smoothly, so try on a computer that had had it
plugged it in before the problem and if it doesn't find threw phone restart they computer and re put the phone in download mode and try again and keep doing that till it recognizes the phone and it should work then
Sent from my SAMSUNG-SGH-I997 using xda premium
Some times just trying a different USB port on the same computer will help to. Not sure why but on my laptop the USB port on the right my Captivate did not like for flashing but the one on the left side always worked right.
Thank you all for helping me out. My infuse is now back in business. I use [ODIN][UCKD5] Odin - Stock (100% or Root+3e) - (Update 06/05/11) but this one got my phone to always boot in recovery mode no matter what i did. So i decide to try Heimdall One-Click Back-To-Stock UCKJ4 + Easy CWM install [2.3.6] (FOR AT&T USERS) and then flash LinuxBozo's Defuse 1.5 kernel. Successfully flash it . However after using Heimdall One-Click, ODIN did not see my phone when it's in download mode. Besides that, everything went well.
cat2115 said:
Please help me. My Infuse 4G doesn't boot. All I see was light on the button. This what happened. I want to go back to stock and use [ODIN][UCKE3] Return to stock (Updated 06/08/11) by gtg465x . I right click on Odin and run as Admin. Odin see my phone on a download mode. I select infuse.pit on PIT, PDA in Pda, and Phone in Phone. then click Start. It got stuck at factory.fs (don't remember the name actual name). It stuck there for so long, maybe like an hour. Then I decide to unplug and pull battery out. close the Odin and redo the step again. This time the status bar went half way and then got stuck again. I left it overnight just to see if it's actually finish and it never did. Just stuck there. Turn the phone on and i only see light on the button. Is my phone dead? I can still able to get to download mode but the phone won't boot.
I done return to stock so many times and was successful. This was the first encounter I had where Odin stuck and never complete it flashing.
Click to expand...
Click to collapse
I was stuck in Samsung logo. And cannot get into the Download mode. Could you help me with that? Or anyone?
pkayrat said:
I was stuck in Samsung logo. And cannot get into the Download mode. Could you help me with that? Or anyone?
Click to expand...
Click to collapse
What have you tried so far to get in to Download mode?
Sent from my SAMSUNG-SGH-I997 using XDA App
My infuse is stuck at boot screen saying Galaxy S GT-I9000 and it won't go into CWM or anything even when i connect my usb cable.
iswift said:
My infuse is stuck at boot screen saying Galaxy S GT-I9000 and it won't go into CWM or anything even when i connect my usb cable.
Click to expand...
Click to collapse
Is looks like you flashed an I9000 rom.That's a no no, unless you flash Hellraiser rom right after. Since you can't get into recovery, you will have to use Odin or Hiemdall to be able to boot up. That's only if your positive you cannot get into recovery.
[ODIN][UCLB3] AT&T 2.3.6 Gingerbread with root and CWM recovery option - Infuse 4g
http://forum.xda-developers.com/showthread.php?p=25177681
[AT&T] [ROM] [UCLB3] Heimdall One-Click Return to Stock + Easy CWM Installation
http://forum.xda-developers.com/showthread.php?p=23118134
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
I am 100% i can't get into recovery mode and when i try getting into download mode all it says is downloading with a big triangle with an android person in the middle with a shovel.
edit: My phone won't even boot anymore. Like it won't even turn on
iswift said:
I am 100% i can't get into recovery mode and when i try getting into download mode all it says is downloading with a big triangle with an android person in the middle with a shovel.
edit: My phone won't even boot anymore. Like it won't even turn on
Click to expand...
Click to collapse
Let is sit with the charger plugged in might need to be charged...you want to be in download mode to do the one click or Odin...the big triangle with the android dude shoveling...that is what you want...Odin or one click it back to stock and you can if you want read up on a few items...see my links in my signature, ok
good luck
Yes, just keep going with it. When I bricked my phone the big triangle etc wasn't showing any response. However, I went ahead and flashed with Odin (Odin could see my phone) and when it was done, the screen restarted and booted normally.
I just got a new Verizon S3 about a week ago and a few days ago I followed the instructions in the Original development section to install the CM10 nighties. Everything was working great but just a little bit ago I tried to upgrade to the newest build through the clockworkmod rom manager that was installed with cm10 but now when I restart the phone just constantly boot loops. It shows the samsung screen followed by samsung screen (but with booting recovery at the top) and finally the android dude for a few secs then just repeats! How do I fix my phone! Or did I F**K myself good?
vanattab said:
I just got a new Verizon S3 about a week ago and a few days ago I followed the instructions in the Original development section to install the CM10 nighties. Everything was working great but just a little bit ago I tried to upgrade to the newest build through the clockworkmod rom manager that was installed with cm10 but now when I restart the phone just constantly boot loops. It shows the samsung screen followed by samsung screen (but with booting recovery at the top) and finally the android dude for a few secs then just repeats! How do I fix my phone! Or did I F**K myself good?
Click to expand...
Click to collapse
Odin back to stock
vanattab said:
I just got a new Verizon S3 about a week ago and a few days ago I followed the instructions in the Original development section to install the CM10 nighties. Everything was working great but just a little bit ago I tried to upgrade to the newest build through the clockworkmod rom manager that was installed with cm10 but now when I restart the phone just constantly boot loops. It shows the samsung screen followed by samsung screen (but with booting recovery at the top) and finally the android dude for a few secs then just repeats! How do I fix my phone! Or did I F**K myself good?
Click to expand...
Click to collapse
Can you get into recovery (volume up + home + power) to try flashing a previous rom download or restore a backup? If that doesn't work, you'll probably need to Odin your way back to stock or stock.root66 (http://forum.xda-developers.com/showthread.php?t=1762709)
PJnc284 said:
Can you get into recovery (volume up + home + power) to try flashing a previous rom download or restore a backup? If that doesn't work, you'll probably need to Odin your way back to stock or stock.root66 (http://forum.xda-developers.com/showthread.php?t=1762709)
Click to expand...
Click to collapse
Ok I was able to get into recovery. I tried restoring a backup but that did not help I am now going to try and re install the downloaded rom. I might just odin back to stock I don't know if my nerves can handle the stress of this mod thing.
I tried installing from downloaded rom and that did not work ether. I down loaded the odin and the Samsung drivers but the drivers don't seem to be installing right. The phone shows up under devices and printers but has an ! on it. I tried telling it to update the driver by had but I got this error:
Code:
Windows found driver software for your device but encountered an error while attempting to install it
SAMSUNG Mobile MTP DEVICE
This device cannot start (Code 10)
I have the device booted in to recovery ClockworkMod Recovery because thats the only place I can get it with out it continually restarting. (I thought that the Recovery I had was called K-exec or somthing? It looks the same I think though so I am not sure. Is that what broke my system did I break somthing my flashing ClockWorkMod recovery over K-exec? Can I fix that from clockWorkMod Recovery. HELP
Odin back to stock to be safe.
Sent from my SAMSUNG-SGH-I717.
joeyu629 said:
Odin back to stock to be safe.
Sent from my SAMSUNG-SGH-I717.
Click to expand...
Click to collapse
How can I odin back to stock if I can't get the driver to install? Can I odin while in the booted clockworkmod recovery menu?
vanattab said:
How can I odin back to stock if I can't get the driver to install? Can I odin while in the booted clockworkmod recovery menu?
Click to expand...
Click to collapse
Did I have to have odin installed on my phone before hand??
vanattab said:
Did I have to have odin installed on my phone before hand??
Click to expand...
Click to collapse
/facepalm
Odin is a PC program. You need to go into download mode to connect to it and flash back to stock.
Vorfidus said:
/facepalm
Odin is a PC program. You need to go into download mode to connect to it and flash back to stock.
Click to expand...
Click to collapse
I don't think I can get into download mode(If thats the thing with the yellow triangle) you do that with (vol up+power+home) right. Then I press that combo I go to ClockworkMod Recovery v5.8.4.8. I think I have tried most all the options from there.
vanattab said:
I don't think I can get into download mode(If thats the thing with the yellow triangle) you do that with (vol up+power+home) right. Then I press that combo I go to ClockworkMod Recovery v5.8.4.8. I think I have tried most all the options from there.
Click to expand...
Click to collapse
From the sounds of it you should have never attempted any of this, download mode is volume down + home + power.
Sent from my SCH-I535 using xda app-developers app
vanattab said:
I don't think I can get into download mode(If thats the thing with the yellow triangle) you do that with (vol up+power+home) right. Then I press that combo I go to ClockworkMod Recovery v5.8.4.8. I think I have tried most all the options from there.
Click to expand...
Click to collapse
Ok never mind download mod is down arrow. I read the web page wrong. Whats more is I was able to install drivers once I entered download mode so it looks like I might be alright. I am downloding stock rom now and will update you all soon. Thanks for your help and patience with my n00bness
actually download mode is hold volume down +home (button on the front in center) + power till the screen shows download mode
edit: posted this same time you figured it out lol
bc760 said:
From the sounds of it you should have never attempted any of this
Click to expand...
Click to collapse
Probably true or at least I should have done my homework first.
we all learn somewhere. funny how thought of a brick gets people researching more than they normally would, right? lol, all been there
Upgrade your recovery from cwm touch to cwm 6.whatever.it.is. Cwm touch is buggy. I don't know how exactly you do that if it's not booting to the rom but maybe this can help point you down the right path.
Sent from my SCH-I535 using xda app-developers app
psycopanther said:
learn somewhere. funny how thought of a brick gets people researching more than they normally would, right? lol, all been there
Click to expand...
Click to collapse
Downside of all the one click this and one click that. You should be required to root at least once using odin and adb before having access to the one click tools as you may end up needing those down the road.
Ok guys I got my phone back up and running! http://forum.xda-developers.com/images/smilies/good.gif Thanks for the help! However the bloatware that popped up right away is about enough to make me risk flashing 4.1 again.
vanattab said:
Ok guys I got my phone back up and running! http://forum.xda-developers.com/images/smilies/good.gif Thanks for the help! However the bloatware that popped up right away is about enough to make me risk flashing 4.1 again.
Click to expand...
Click to collapse
If you really don't wanna take the risk you can just delete it all with Titanium Backup. But hey, if you really want to, go right ahead. Just do a little more research before you jump in. We've all been there, though, so don't feel stupid.
PJnc284 said:
Downside of all the one click this and one click that. You should be required to root at least once using odin and adb before having access to the one click tools as you may end up needing those down the road.
Click to expand...
Click to collapse
i agree. more community is informed, faster we all progress