Database Info

[Q] FB's GB Ext4 Starter Pack

Hi, I just got my phone a couple weeks ago, found this site and have been reading through the threads as much as possible. After reading through the step by step guide created by FB (thread link below) I feel confident that this shouldn’t be too difficult. When you get to step 11 it says to flash the GB you put on your SD cards. Do you need to do anything before that? The reason I’m asking is most of the ROM’s included their own install procedure like Audiophile FTW says, factory reset, wipe cache, check mounts etc. I wasn’t sure if that still needs to be done?
Also, since I’m starting with a stock phone would it be a good idea to flash Bali for Froyo first to get CWM and do a back-up before I try this?
Thanks for any help that can be provided.
http://forum.xda-developers.com/showthread.php?t=1223765

Sorry I meant odin bali not flash.
Sent from my SGH-T959V using XDA App

you should always wipe data and clear cache before flashing a rom. you will not need to odin bali prior to fb's procedure. after you flash gb files, you will automatically have cwm.

Thanks, so I don't need to worry about backing up stock phone before I got to gb?
Sent from my SGH-T959V using XDA App

To be honest, I made backups ever single time I flashed a ROM. And I only fully restored once or twice. Back up once you are in GB. That way you can restore data. Once you are on GB, you won't go back to Froyo...
Sent from my SGH-T959V using xda premium

Sounds good. Thanks again for your help.
Sent from my SGH-T959V using XDA App

Two More Questions
Sorry, I have two more questions if anyone can help.
1 - I want to flash icbinb KI3 1.3. It states if you have problems with converting to EXT4 the flash FB's busybox installer before icbinb ROM, however if I follow the guide I should do the below. If I follow the below instructions instead of flashing busybox installer before will i have any problems?
Go into the voodoo menu > enable lagfix and /system lagfix on
11) Flash the GB rom you put on your sd card
12) Flash the busybox_installer.zip
13) Reboot
2- Also, the above guide has you enable lagfix & /system lagix before you flash, but when you flash icbinb KI3 1.3 it says to flash ROM and then enable voodoo. Is it still OK to enable lagfix then flash?
I'm probably making this more complicated than it really is. Again, any advice is appreciated. Thanks!

Voodoo doesn't get enabled until you hit reboot. The order in which you enable voodoo (before or after flashing a rom) doesn't matter, as long as you do the flashing AND the voodoo enabling before you reboot.

Thanks...That makes perfect sense. As I said I think I was making it more complicated than it was. Also, Thanks for making the guide!

Finally had the time to do this. It was really easy and had no problems at all. I'm just in the process of calibrating my battery and working on restoring my apps. Having a couple problems with some apps not wanting to restore via TB, but I'm sure I'll figure it out.
Anyone that wants to jump to GB just follow FB's guide and you should have no problems.

[Q]Reflashing s7 from cm7 and app install problems

So I flashed the unofficial cm7 build from the dev forum meaning I now have blue Cwm instead of red that I used with s7. What steps are required to reflash s7? Do ihave to use sgs kernel app to reflash kernel then flash s7?
Also I'm having issues restoring apps with titanium. The "stock" app installation screen doesn't allow me to choose install, only cancel. Does this issue stem from not having done a factory data wipe? The thread I read only mentioned to format the system disk but I don't think it was written from the perspective of having come from s7.
Mad props for any help
Sent from my SGH-I997 using XDA App

Yes you will eventually have to use SGS to flash a kernel. Maybe this is the long way around but when I flashed back from cm7 yesterday I used sgs kernel flasher and followed the instructions for infused gb. When I flashed the kernel it got stuck converting partitions to ext4 (probably because they were already in ext4). But I did a battery pull in the middle and was back in red cwm. After that I flashed infused again without hassle with infusion core b. That being said, as long as you have red cwm, you should theoretically be able to flash whatever rom you want.
So in short : just follow the FULL instructions to flash infused v2. Then flash s7. Hope this helps
Sent from my SGH-I997 using XDA App

Thaanks! Will try this if my reflash of cm7 doesn't fix issues....do you think my app install problems are stemming from a previous install?
Sent from my SGH-I997 using XDA App

Hmmm...well out of habit I always personally makes sure I format everything, wipe the dalvik cache, fix permissions and wipe the cache partition as well. A lot of the devs stress that this is necessary so I wouldn't doubt that your app install problems are from a previous install. Something tells me, and someone please correct me if I'm wrong, that when you are going from a voodoo enabled ROM like infused or s7 to a ROM like cm7 that doesn't use voodoo lagfix, you will have issues with trying to get your apps back because they were using a different (but still similar since they are both EXT4) file system. This is just my guess. If anyone could elaborate more on this please do.
I would highly suggest flashing back to stock if you still experience issues or even ultimate unbrick so that way you can get a clean slate. Maybe try using apps2sd. I own it and can verify that it works well. Many others have also praised it. Good luck!

stratatak7 said:
Hmmm...well out of habit I always personally makes sure I format everything, wipe the dalvik cache, fix permissions and wipe the cache partition as well. A lot of the devs stress that this is necessary so I wouldn't doubt that your app install problems are from a previous install. Something tells me, and someone please correct me if I'm wrong, that when you are going from a voodoo enabled ROM like infused or s7 to a ROM like cm7 that doesn't use voodoo lagfix, you will have issues with trying to get your apps back because they were using a different (but still similar since they are both EXT4) file system. This is just my guess. If anyone could elaborate more on this please do.
I would highly suggest flashing back to stock if you still experience issues or even ultimate unbrick so that way you can get a clean slate. Maybe try using apps2sd. I own it and can verify that it works well. Many others have also praised it. Good luck!
Click to expand...
Click to collapse
i went and did another install of cm7 before i ultimate unbrick back to stock. i figure out the app install problem; unknown sources wasn't checked...very noob. but the promt at the beginning of titanium caught me off guard and i cancelled before i could read it.
i, too, noticed that my app icons were intact on my desktop after the s7 to cm7 flash but most (if not all) those that did not require root would force close upon opening. reinstalling the app worked, but i had to get them from the market at the time as my unknown sources box was unchecked. also, i've noticed that widgets do not reload after reboot.
one more thing, after the second flash of cm7, i noticed that flashing gapps only provided me with the market. others such as email and talk were available for dl thru the market but weren't loaded from the gapps flash. i tried multiple times to no avail.
i'm about to ultimate unbrick and reflash cm7 from stock. one more last thing, i'm fairly comfortable with red cwm but have only encountered blue with cm7...how do i wipe the dalvik cache?
thanks for the help!

albee320 said:
i'm about to ultimate unbrick and reflash cm7 from stock. one more last thing, i'm fairly comfortable with red cwm but have only encountered blue with cm7...how do i wipe the dalvik cache?
thanks for the help!
Click to expand...
Click to collapse
When using TiBu, make sure and restore apps using the "restore all apps with data" option, just did it coming from S7 to MIUI and worked fine.
As far as Gapps go, I downloaded them from the Cm7 wiki and installed them manually from blue CWM just to make sure everything was added and it worked for me.
Dalvik is in advanced just like red CWM, just a different color.

xIC-MACIx said:
When using TiBu, make sure and restore apps using the "restore all apps with data" option, just did it coming from S7 to MIUI and worked fine.
As far as Gapps go, I downloaded them from the Cm7 wiki and installed them manually from blue CWM just to make sure everything was added and it worked for me.
Dalvik is in advanced just like red CWM, just a different color.
Click to expand...
Click to collapse
I've always heard it is a huge no-no to restore all apps with data.

EricNagel said:
I've always heard it is a huge no-no to restore all apps with data.
Click to expand...
Click to collapse
restoringing all USER apps with data is okay but dont include SYSTEM apps with data

EricNagel said:
I've always heard it is a huge no-no to restore all apps with data.
Click to expand...
Click to collapse
the "system data" is the no no, and "restore missing apps" is the preferred option, but I've always avoided system data and have been fine everytime I restore.

[Q] cyanogenmod7

First post! Hopefully it's in the correct place!
Anyways,
I have rooted my phone using the ACE Hack Kit. Once that was completed I wanted to use the cyanogen ROM(recommend from a friend). I fully wiped from phone and then ran the cyanogen zip. Everything is fine until I use my phone for an extended period of time(for instance when I'm trying to set up my phone). For some odd reason my phone will freeze and I will be forced to take my battery out. From what I've read/understand I have done everything properly. Is there anything that I possibly missed or have not done that will cause these random freezes?
Thank you,
-ant_wailes

ant_wailes said:
First post! Hopefully it's in the correct place!
Anyways,
I have rooted my phone using the ACE Hack Kit. Once that was completed I wanted to use the cyanogen ROM(recommend from a friend). I fully wiped from phone and then ran the cyanogen zip. Everything is fine until I use my phone for an extended period of time(for instance when I'm trying to set up my phone). For some odd reason my phone will freeze and I will be forced to take my battery out. From what I've read/understand I have done everything properly. Is there anything that I possibly missed or have not done that will cause these random freezes?
Thank you,
-ant_wailes
Click to expand...
Click to collapse
You or anyone wouldn't happen to know off hand if the kernel is UVed or OCed? This sounds like a UV or OC problem. Its an easy thing to fix if it is and I find that's is always best to rule out the easy stuff first! Some phones don't like to be UVed or OCed at all and freezes like this sometimes are caused by exactly that, UV or OC.
edit: and oh yeah, WELCOME! If you really like CM ROMs, give absolution a try (at the very least, if you or someone doesn't know if the kernel is UVed or OCed, you're be using a ROM I'm familiar with and if the problem persists on this ROM, diagnosing the a UV or OC problem should be fairly simple and I'll know how to get that fixed quickly for you since I haven't used the straight CM ROM in quite some time!) Actually come to think of it, did you check the md5 number? you could have downloaded a bad link causing a bad flash. It's rare most of the time but I have seen it happen..

If you havent downloaded any apps and dont mind reflashing the ROM just down load the full wipe place in ROOT (No Folder) of SD Card go into recovery.
Full Wipe (DO NOT RENAME AFTER DOWNLOAD)
http://www.megaupload.com/?d=CJPE5CB7
1. Choose zip from SD Card (Full Wipe 1.5) and Install
2. Choose zip from SD Card (Cyanogen ROM) and install
3. Reboot system and enjoy.
I dont like to do the wipe cache, wipe dalvik whatever method, the zip 1.5 does a full wipe all on its own. Its an EXT4 Wipe so I use it for all EXT4 ROMS that I like to try out.
!!!WARNING: When you flash the full wipe do not exit recovery without installing your ROM. So make sure that when you enter into recovery thru Rom Manager to reflash make sure that you have both (Full Wipe Zip) and (Your ROM Zip) on your SD Card before installing.
I tried cyanogen and completed hated it. Absolution is the Bomb!!! But to each their own flavor.
ENJOY

@reponse
First off, thank you for the responses!
@MMM-BACONSTRIPS
I do not know if the rom is OCed or UVed(had to look up those). Here's the link to the page where I downloaded it from. Also, I did not check the md5 numbers.
http://forum.xda-developers.com/showthread.php?t=965342
So far today it hasn't froze on me. However, if it does it again I'll def look at some different roms (absolution & puregandroid)
@Reinaldo33897
I did full wipe(I don't remember if the version was 1.5) before I installed the rom. If anything. I'll try absolution and puregandroid.
Once again, thank you!
-ant_wailes

ant_wailes said:
First off, thank you for the responses!
@MMM-BACONSTRIPS
I do not know if the rom is OCed or UVed(had to look up those). Here's the link to the page where I downloaded it from. Also, I did not check the md5 numbers.
http://forum.xda-developers.com/showthread.php?t=965342
So far today it hasn't froze on me. However, if it does it again I'll def look at some different roms (absolution & puregandroid)
@Reinaldo33897
I did full wipe(I don't remember if the version was 1.5) before I installed the rom. If anything. I'll try absolution and puregandroid.
Once again, thank you!
-ant_wailes
Click to expand...
Click to collapse
Not a problem man! Be aware though with the 1.5 wipe that it DOES format your system and data to EXT4, and if I'm not mistaken if you make a back-up on EXT 4 and then format back to EXT 3, it will not work and the same applies for vice versa. If you do end up trying Absolution just drop on by the Q & A if the freezing problem persists, I or one of the devs will try to give you hand the best we can..feel free to PM if you go with Absolution

So does the 1.5 wipe SDCard also? will EXT4 end up being a problem? Also, will do! I really appreciate the help!
I'll def give absolution a shot!

ant_wailes said:
So does the 1.5 wipe SDCard also? will EXT4 end up being a problem? Also, will do! I really appreciate the help!
I'll def give absolution a shot!
Click to expand...
Click to collapse
No, if you use the full wipe it pretty much just does the wipe data, wipe cache and wipe dalvik cache in one flashable zip. I typically use the 1.5 then wipe data, cache and dalvik cache. It is completely overkill and really not necessary but I do it just the same. No, EXT4 should no cause a problem. I'm pretty sure that almost all the ROMs are now EXT4 supported. I believe it would say it if it wasn't at this point. I know the major ROMS (ARHD, CD, Bindroid, MIUI) are all compatible with EXT4. The only issues you will find with EXT4 is the issue I mentioned in my first post and if you want to use gene's tool to unroot.

Welcome to xda and yes I had the same problem I was setting up setcpu and I sneezed and I accidentally pushed it all the way over to 1.9 and my phone didn't like it it just froze...I was worried :/ so I turned my phone back on and went into setting and forced setcpu to close (mind you it took a few restarts lol) but yes I had let it reset itself and now it's working again I just need to remind myself to do a nandroid once a day xD hehe
Sent from my Inspire 4G using xda premium

No problem we are here to help each other. Usually if I want to get back to EXT3 I just flash the rooted ATT gingerbread ROM (PD98 zip) in hboot.
Sent from my Inspire 4G using xda premium

Reinaldo33897 said:
No problem we are here to help each other. Usually if I want to get back to EXT3 I just flash the rooted ATT gingerbread ROM (PD98 zip) in hboot.
Sent from my Inspire 4G using xda premium
Click to expand...
Click to collapse
I believe there is a 1.3 wipe that formats to ext 3 again, just in case the OP wanted to format to ext3 before flashing a new ROM as opposed to flashing a new rom and then having to wipe and then flash again.

Cool Thx I'll do s search for the 1.3. It be good to have.
Sent from my Inspire 4G using xda premium

CWM for root. Quickie.

I just wanted to thank everyone for the help with my previous question. Now that I got that fixed, I have another question regarding Titanium Backup Pro and Clock Work Mod for the galaxy S 4G. I downloaded the key for the Titan. Backup to make it Pro. I installed Titan. backup fine no problem. Them when I try to install the key that would make it Pro, a popup came up that said: "Titan. Backup Pro cannot be installed. Free up some space and try again." Well I searched around and found that I should clear the dalvik cache using Clock Work Mod.
My question is how would I install Clock Work Mod on my device and How would I go about clearing the davlik cache using Clock Work Mod?
Are there going to be problem after clearing the davlik cache? And if further on along the line, I want to flash ROM's, should I clear my davlik cache every time just to be safe?
Thank you for the help if you guys/gals can help out.

First off are you running a custom rom? Or are you running stock?
Is your phone rooted?

I am running stock ROM Froyo. Yes, it is rooted.

I'll have to leave it to somebody else to help. so long since I've run froyo... That I wouldn't know were to start lol... plus at the moment I am driving

Use the guide in the second link of my signature to put yourself on Gingerbread - flash with bootloaders - then post back when finished.

Use this guide. Tells you how to do everything step by step.
http://forum.xda-developers.com/showthread.php?t=1470716
Sent from my SGH-T959V using xda app-developers app

Guys I think he wants to backup all his stuff before he flashes roms
Do we have clockwork recovery kernels for froyo?

I was wondering about flashing a ROM like the ICS port, the AOKP one. But I figured that it would be a lot safer if I had a backup of all my data first so I decided to get Titan. Backup. to do the job. and that was what landed me where I am right now.
Any help would be appreciated.

mierkat09 said:
Use this guide. Tells you how to do everything step by step.
http://forum.xda-developers.com/showthread.php?t=1470716
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
In case you are unaware, you cannot use the guide in the first post as Kies mini will not recognize rooted phones.

To be honest I wouldn't worry about all that if you end up going with gingerbread or ice cream sandwich just go for it

Ah, the thing is I'm also interested in Titan.'s other feature's like freezing apps and stuff like that. Add to that the fact that I bought the app already that would make the regular version turn into the Pro version.

My bad Lumin,i actually was unaware. Think this would work, right lumin?
http://forum.xda-developers.com/showthread.php?t=1500427
Sent from my SGH-T959V using xda app-developers app

No you did good to buy it....it will be very usefull in everything you do but with froyo lol you will never look back at....trust me.
Follow lumins advice and then play with gb for a bit you'll be happy.
I'm on aokp but going to ics,cm9,aokp straight from froyo is going to be a shocker

buntobo said:
I was wondering about flashing a ROM like the ICS port, the AOKP one. But I figured that it would be a lot safer if I had a backup of all my data first so I decided to get Titan. Backup. to do the job. and that was what landed me where I am right now.
Any help would be appreciated.
Click to expand...
Click to collapse
If you have bought titanium backup pro you should have gotten a file emailed to you that you put on your sdcard. Once its there just run regular TiB as its the same but the license will unlock other features.
As for keeping data across the different os's I personally dont recommend saving anything but non system apps. If you want to save texts use sms backup and restore from the play store. Otherwise start fresh that way you dont introduce new bugs into the phone.

mierkat09 said:
My bad Lumin,i actually was unaware. Think this would work, right lumin?
http://forum.xda-developers.com/showthread.php?t=1500427
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
Gremlin Remover or Heimdall KJ6 One-Click. The reason is they will both flash bootloaders for you. I referred the OP to the Heimdall One-Click guide because of the more detailed directions and pictures.

So I should just flash a ROM like GB or the AOKP Team Acid ROM anyway right and forget about Froyo? Then install Clock Work Mod on my device or does Clock Work Mod come with the ROM's themselves? If I flash a new ROM, will my dalvik cache be cleared so that I would have enough space to install things? How would I be able to save my contacts, just save them to my SIM card and they should be fine right? Would flashing a new ROM take up my phones internal memory?

buntobo said:
So I should just flash a ROM like GB or the AOKP Team Acid ROM anyway right and forget about Froyo? Then install Clock Work Mod on my device or does Clock Work Mod come with the ROM's themselves? If I flash a new ROM, will my dalvik cache be cleared so that I would have enough space to install things? How would I be able to save my contacts, just save them to my SIM card and they should be fine right? Would flashing a new ROM take up my phones internal memory?
Click to expand...
Click to collapse
You need to flash a gb rom with bootloaders if you are on froyo. Otherwise you will be back upset your phone is broke.
A custom recovery is included in all roms. Once you flash part of the instructions are to factory reset/ data wipe in recovery.
Back you contacts up to the sdcard if you dont use google contacts otherwise you wont be able to access them from the ICS variants.
Yes like I stated when installing a new rom part of it is doing a factory reset/data wipe.

If you really do want to stay on Froyo and you want CWM... then this should work for you:
http://forum.xda-developers.com/showthread.php?t=1099374
But yeah, you should definitely consider upgrading to Gingerbread asap, *especially* if you're wanting to flash custom ROMs later on down the line. Use the Heimdall One-Click sticked in the development forum.

Eollie i bought tb pro and all that's done is it applies as an app nothing different than when you get tb originally from the market

Lol if you do gremlin remover one click you don't have to make an extra step of flashing a cwr kernel.
As I'm aware heimdall doesn't do it

Update Gone Wrong

Hello - I tried to update my phone from Infuse v2.2.3 to Th3Bill JB 3.3.2 and got in an endless loop. I then tried to go into recovery mode and do a restore. Checked the MD5, Erased boot and then started restoring boot image and thats where she has been sitting for some time. I will pull batter and attempt again however I may be hosed. Any help greatly appreciated.

It is not possible, that I am aware of, to go from Froyo straight to JB. You will also not be able to restore a backup at this point due to changes made on the phone in the borked attempt. You should be able to wipe data, cache, and dalvik, and after a couple of attempts re- install a Froyo rom from scratch. If you can't do that, do this.
http://forum.xda-developers.com/showthread.php?t=1629079
Thanks to qkster and Entropy for this.

I had that issue as well. Only cause I like to see if I can be done. But no. What I do is go back to stock and rooted then flash a ICS ROM then make sure it boots. Then go wipe all stuff in cwm and flash jelly
Sent from my SGH-I997 using xda app-developers app

Hey Pony, I was on the custom ROM Infuse v2.2.3 and not stock Froyo. I ended up doing the gtg ultimate unbrick to bring it back to stock and then did the full back to Infuse v2.2.3 and then did a nandroid restore. Everything looks good but it is acting a bit weird. Like I will try to open my applications or folders it sometimes hangs. I consistantly get it to free up by locking the phone and then unlocking it. Weird huh? Anyway I would be interested in trying to upgrade to JB but would like more instruction on that. Thanks for responding and if you can recommend anything that might help Im all ears.

See the post below - if you need more specific instructions let me know.
Thanks rkkaranrk.

Use Odin or heimdll to get stock GB Tom and then from there u can flash any rom u like just follow the instructions in the OP. You can go directly from GB to ICS but for JB u have to flash any ICS rom first and then JB.
Read the instructions on every thread.
Sent from my MB855 using Tapatalk 2

"Update Gone Wrong" ,Sounds like a Reality Show.

Truckerglenn said:
"Update Gone Wrong" ,Sounds like a Reality Show.
Click to expand...
Click to collapse
Lmfao! Yes...
The only reality show that follows Android Phone Development, and the dangers and drama of rooting and tweaking phones.
It'll be a hit!
Posted from my Paranoia Infused Android, now featuring Butter flavored JellyBeans!