Related
Does anyone have a link or have the sbl.bin and boot.bin files for the Samsung Infuse? Gracias!
You think you can unbrick bricked bootloaders in an Infuse?
re: bootloaders
ookba said:
You think you can unbrick bricked bootloaders in an Infuse?
Click to expand...
Click to collapse
the short answer is NO the long answer is not in a hundred years!
Good luck, sell it on eBay you can get between $100-$200 for it if the fone is good shape all in one piece!!!
----------
Misterjunky said:
the short answer is NO the long answer is not in a hundred years!
Good luck, sell it on eBay you can get between $100-$200 for it if the fone is good shape all in one piece!!!
Click to expand...
Click to collapse
connexion has a riffbox, this is how the firmware is installed at the factory. he wants this so he can provide a service for us. so the answer is 100% yes. don't speak so fast. Samsung also may have a way to repair bootloaders throught the USB, Adam outlet has been researching ways to do this and might be close.
connexion I'm on my phone so it is tedious to search and provide a link, but there was a untested bootloader dump in lost1's Odin package, the pit doesn't work with that one.
also gtg and other are trying to get Rogers bootloaders but without your service it is getting hard to get a tester, not sure if they got a good dump yet. thank you for your interest. i hope you are successful in finding what You need.
re: Oops
Dani897 said:
connexion has a riffbox, this is how the firmware is installed at the factory. he wants this so he can provide a service for us. so the answer is 100% yes. don't speak so fast. Samsung also may have a way to repair bootloaders throught the USB, Adam outlet has been researching ways to do this and might be close.
connexion I'm on my phone so it is tedious to search and provide a link, but there was a untested bootloader dump in lost1's Odin package, the pit doesn't work with that one.
also gtg and other are trying to get Rogers bootloaders but without your service it is getting hard to get a tester, not sure if they got a good dump yet. thank you for your interest. i hope you are successful in finding what You need.
Click to expand...
Click to collapse
Sorry about that, I was under the impression that he is trying to fix his bootloader, perhaps I did not read his post properly
Misterjunky said:
Sorry about that, I was under the impression that he is trying to fix his bootloader, perhaps I did not read his post properly
Click to expand...
Click to collapse
he will fix bootloaders soon, the riffbox means opening up the phone and flashing directly to the board. and that means the ability to test gb bootloader dumps in confidence! hopefully we will have a tested working gb bootloader dump before then but if not connexion will be a good person to be involved.
but i understand that you may have thought he was flashing with Odin. still bootloaders are needed to use the pit file if used with heimdall, little known fact but i didn't think the bootloader request would be weird no matter who it is. i try to assume the poster has the knowledge unless it is otherwise apparent that they don't.
connexion - try to catch up with gtg465x or LinuxBozo on IRC, #infuse4g on freenode. They can hook you up.
BTW, due to troll problems webchat users are currently banned, you need to use a real client.
Thanks guys ill give one of hem a shot. Currently I can do the Captivate, Vibrant, i9000, TAB 7", Nexus S and Epic aand many many more. The Infuse has very similar hardware. If I can map the pinouts I may be able to connect and re-write a Captivate bootloader which COULD allow download mode and allow me to flash the correct ones. If that won't work but I can still connect via JTAG I can still just back up a working Infuse to create my own bootloaders. This is worlds first stuff we are talking about and I'm trying to get you guys in on a solution for a hard brick...
Sent from my GT-I9100 using XDA Premium App
connexion2005 said:
Thanks guys ill give one of hem a shot. Currently I can do the Captivate, Vibrant, i9000, TAB 7", Nexus S and Epic aand many many more. The Infuse has very similar hardware. If I can map the pinouts I may be able to connect and re-write a Captivate bootloader which COULD allow download mode and allow me to flash the correct ones. If that won't work but I can still connect via JTAG I can still just back up a working Infuse to create my own bootloaders. This is worlds first stuff we are talking about and I'm trying to get you guys in on a solution for a hard brick...
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Thats insanely awesome thanks bro
Sent from my SAMSUNG-SGH-I997R using XDA Premium App
connexion2005 said:
Thanks guys ill give one of hem a shot. Currently I can do the Captivate, Vibrant, i9000, TAB 7", Nexus S and Epic aand many many more. The Infuse has very similar hardware. If I can map the pinouts I may be able to connect and re-write a Captivate bootloader which COULD allow download mode and allow me to flash the correct ones. If that won't work but I can still connect via JTAG I can still just back up a working Infuse to create my own bootloaders. This is worlds first stuff we are talking about and I'm trying to get you guys in on a solution for a hard brick...
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
AWESOME!
This could come in handy
Thanks for understanding and appreciating it! I just cracked the SGS II variants last week with the help of the RIFF team as well...
connexion2005 said:
Thanks for understanding and appreciating it! I just cracked the SGS II variants last week with the help of the RIFF team as well...
Click to expand...
Click to collapse
Glad to have u.aboard
Sent from my SAMSUNG-SGH-I997R using XDA Premium App
Chewy11 said:
AWESOME!
This could come in handy
Click to expand...
Click to collapse
+1 Great News!
I think I can see the end of the rainbow.....
Sent from my SAMSUNG-SGH-I997 using XDA App
AT&T Froyo loaders: http://www.mediafire.com/?427lho7p35xy2hy
Rogers GB loaders: http://www.mediafire.com/?wuzs1wa4tr8btyy
Enjoy.
ookba said:
You think you can unbrick bricked bootloaders in an Infuse?
Click to expand...
Click to collapse
It can be done, as outlined above.
Sent from my Captivate
BTW, do you know of anyone who has done work with using OpenOCD and FT2232-based JTAG dongles instead of the RIFF box?
If I can find a candidate "guinea pig" device (even a non-Infuse similar to ours) cheaply enough I may try getting the OpenOCD + FT2232 combo going with a Bus Blaster v2.
Which reminds me - What's the target Vref voltage for Samsung's JTAG port? Bus Blaster v2 can go down to 1.2 volts.
I've never tried using any other JTAG solution. I write to i897 with a JTAG Target Voltage of 2.8V...
Has anyone tested those bootloaders and actually flashed them? They appear to be legit after looking at them with a hex editor. If they are legit then Infuse bootloaders are NOT compatible with i897, T959 or i9000 bootloaders as both sets of those bootloaders for Rogers and ATT hard bricked my test Vibrant. Still does not mean I'm out of options. If I can connect to an Infuse via JTAG, I can write a script and inject my own bootloaders that way most likely.
Here's the real sticking point. We've tried heimdall and odin to flash bootloaders, and they either error out on flash, or just don't take at all. We're guessing there is some sort of signature checking, or the infuse has some other way of flashing bootloaders correctly. No one really has had time to sit down and figure it out completely.
Hi, everyone, I've recently HARD BRICKED my Samsung Galaxy MODEL: T959V with T-mobile.
First off, I got pattern locked on my phone, yea I know I'm an idiot, LOL. Next I totally forgot my gmail password so I could not log back into my phone.
So then I next decided to flash back to stock with odin 1.7 and T959UVJFD. tar file from this thread: http://forum.xda-developers.com/show....php?t=1047087.
As a result, my phone would boot to the loading screen with the dashed circle and a battery display in the background and thus would not finish booting all the way.
So I figured I would do more research and found that people would try flashing with the Eugene_2E_JK2_Froyo from this thread: http://forum.xda-developers.com/show...833024&page=49 and after flash back to stock.
After I flashed with the Eugene rom this was when the phone completely died and would not turn on. I tried the take out the battery, holding down and up volume button and plugging into computer method but the computer would not detect it anymore.
Now I don't know what to do. I realized I was flashing with the Galaxy Vibrant kernels with Odin and now, it won't turn on anymore and can't boot into download mode. It is also not being detected my computer when I plug it in. I'ts a blank screen.
Please help.. Thanks, and appreciate it.
Unfortunately, you won't get much sympathy for that. Here's some info for you though.
http://forum.xda-developers.com/showthread.php?t=1333423
http://forum.xda-developers.com/showthread.php?t=1358498
If you can't do the first thread, try to look for someone who can help you with it.
Other than that, you're SoL.
Good luck.
Wow... all kinds of fail.
Sent from my SGH-T959V using XDA App
op, lol. You are lucky bkoon posted first. Normally people would flame you for something like this. If ths above methods don't work, post in this thread again. Don't worry, you're not the first one to do this...pm me if you are still having problems.
Sent from my T959 using xda premium
jager555 said:
op, lol. You are lucky bkoon posted first. Normally people would flame you for something like this. If ths above methods don't work, post in this thread again. Don't worry, you're not the first one to do this...pm me if you are still having problems.
Sent from my T959 using xda premium
Click to expand...
Click to collapse
Normally wouldn't have posted anything, but seeing that no one did and started flaming him, I decided to help.
There's a good handful of people on XDA (maybe more) who are capable of doing what I mentioned to you. You'll have to look for them though. I'm sure they charge a decent fee as well.
There was a thread by raver i think that stated how to unbrick a hard brick
Sent from my T959 using xda premium
If you can unbrick it.... it was never bricked to begin with.
Sent from my SGH-T959V using XDA App
camalus said:
If you can unbrick it.... it was never bricked to begin with.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
What? the op is definitely bricked...
Sent from my T959 using xda premium
UnBrickable mod is your best option. Read here: http://forum.xda-developers.com/showthread.php?t=1333424
I'd you don't feel comfortable or don't have the tools, I can do it for $30 + shipping (usually $6) send me a PM.
I am having the same problem right now.... did you ever fix yours?
Mylilacs said:
I am having the same problem right now.... did you ever fix yours?
Click to expand...
Click to collapse
What did you do? Listing the steps you took will help.
hechoen said:
What did you do? Listing the steps you took will help.
Click to expand...
Click to collapse
...Will help you get scorned and ridiculed mercilessly! hahah
Mylilacs said:
I am having the same problem right now.... did you ever fix yours?
Click to expand...
Click to collapse
Hello!! I bricked my gs4g, couldn't put it in download mode with the regular bottoms combo, so what I did was:with the phone off push volume bottoms, both in the same time nothing else, then connect your phone with the computer(usb), that gave me download mode
AdamOutler said:
UnBrickable mod is your best option. Read here: http://forum.xda-developers.com/showthread.php?t=1333424
I'd you don't feel comfortable or don't have the tools, I can do it for $30 + shipping (usually $6) send me a PM.
Click to expand...
Click to collapse
I have the same problem and I need you help me, I can pay you the price o more, but I'm from dominican republic and is to dificult send you the phone, so can you tell me whish is the best option to recover my phone.
thanks
hackeadorazo said:
I have the same problem and I need you help me, I can pay you the price o more, but I'm from dominican republic and is to dificult send you the phone, so can you tell me whish is the best option to recover my phone.
thanks
Click to expand...
Click to collapse
Can you get your phone to boot to download mode?
Sent from my SGH-T959 using Tapatalk 4
Cooptx said:
Can you get your phone to boot to download mode?
Sent from my SGH-T959 using Tapatalk 4
Click to expand...
Click to collapse
no, the phone is totaly dead
hackeadorazo said:
no, the phone is totaly dead
Click to expand...
Click to collapse
Does your phone light up at all?
If not, could your battery be completely dead and broke?
Sent from my SGH-T959 using Tapatalk 4
Cooptx said:
Does your phone light up at all?
If not, could your battery be completely dead and broke?
Sent from my SGH-T959 using Tapatalk 4
Click to expand...
Click to collapse
the battery is good, it measure is 4.1 and 3.7 is enough
We have cm9 that J.Y.Daddy abandoned I need help getting sensors fix I have tryed but failed so help is really is needed badly.
Thanks.
Sent from my Milestone XT720 using xda premium
You can take mine source for libsensors and add patches from defy devtree.
Can that be done by mobile labtop not working.
Thanks.
Sent from my Milestone XT720 using xda premium
How to solve it?
I would like to study how ROMs are being laid out. Hopefully before next month I will be able to help in testing, and maybe implementing (?)
Mr fjfalcon, can you post your links for those (libsensors, defy devtree)? I'm having a hard time looking for it. Sorry if I am acting like a newbie. Thanks!
pakpaker said:
I would like to study how ROMs are being laid out. Hopefully before next month I will be able to help in testing, and maybe implementing (?)
Mr fjfalcon, can you post your links for those (libsensors, defy devtree)? I'm having a hard time looking for it. Sorry if I am acting like a newbie. Thanks!
Click to expand...
Click to collapse
All our code is on github:
http://github.com/CyanogenModXT720
The defy stuff is in:
http://github.com/CyanogenDefy
Moize could I do this on mobile labtop not working again.
Would this be simliar to bootfix with defy senors included.
Thanks.
Sent from my Milestone XT720 using xda premium
No, you can't do that on the phone. You would need a computer setup to compile CM7 from source.
I figured you could not do it on mobile the fix can't come from me it will have to be one of are devs.
Sent from my Milestone XT720 using xda premium
Mr. mchlbenner's eagerness to test is always welcome
Thanks for the links! Will study them.
Thanks what you said this has been around about for 7 weeks with no progress I ready to change phones going to lg 2x but I will check this time to time.
Sent from my Milestone XT720 using xda premium
If only J.Y.Daddy would also release his sources. I would start by comparing source code. Since ROMs have compiled source code, i cannot easily compare. I'll just make do with the xt720 source for now. Thanks!
J.Y. Daddy didn't compile. He did a binary port of nadlabak's (aka kabaldan) alpha preview CM9 for Milestone (A853): http://forum.xda-developers.com/showthread.php?t=1445209 You can compare the original and ported versions to study what J.Y. Daddy changed.
Nadlabak's tree is at http://github.com/nadlabak. I don't think anyone's set up a CM9 tree for XT720.
Edit: hey, wait a minute? Do XT720 ROM's run on XT800W?
I throught it did what's the point?
Sent from my Milestone XT720 using xda premium
I haven't tried flashing an XT720 ROM straight to my XT800W, but if I am right, they have minimal differences in hardware (as of now I am inspecting).
I'll try flashing an XT720 ROM straight later
Thanks for the clarification, that helps me to know where to start
Update: Don't flash an XT720 ROM into an XT800W, the recovery for the latter is also overwritten. JUST DON'T. Now I have a brick to fix )
fjfalcon has ics branch
about recovery, sorry hope you will make it live again (may be it will be good idea, to create update with your "orenrecovery" and to "update" it after other updates...
pakpaker said:
I haven't tried flashing an XT720 ROM straight to my XT800W, but if I am right, they have minimal differences in hardware (as of now I am inspecting).
I'll try flashing an XT720 ROM straight later
Thanks for the clarification, that helps me to know where to start
Update: Don't flash an XT720 ROM into an XT800W, the recovery for the latter is also overwritten. JUST DON'T. Now I have a brick to fix )
Click to expand...
Click to collapse
I sent you a pm I will try to get you unstuck.
P.S if senors work on cm9 it would be okay.
Sent from my XT720 using xda premium
mchlbenner said:
I sent you a pm I will try to get you unstuck.
P.S if senors work on cm9 it would be okay.
Sent from my XT720 using xda premium
Click to expand...
Click to collapse
Just unstuck myself using this: http://bbs.hiapk.com/thread-1242662-1-1.html and have replied to your PM. Thanks for all the support guys!
Before I flashed CM 9 for xt720, I flashed CM 9 for xt800w. It works almost all fine except for the camera of course.
@mchlbenner: sensors = proximity / compass / accelerometer ? Looks like they work for the xt800w, straight from the ROM itself. Maybe it's because the hardware used for the A853 is practically the same for the xt800w.
And the J.Y.Daddy uploaded ROMs for CM9 have their debug.sf.nobootanimation set to 0. So might as well for those who will test set this to 1 first.
peshovec said:
fjfalcon has ics branch
about recovery, sorry hope you will make it live again (may be it will be good idea, to create update with your "orenrecovery" and to "update" it after other updates...
Click to expand...
Click to collapse
I'd look into that. I am just overwhelmed at the info I am learning right now, I don't know where to start.
And I lived! Big thanks to google translate for helping me to understand the above posted website
peshovec said:
fjfalcon has ics branch
about recovery, sorry hope you will make it live again (may be it will be good idea, to create update with your "orenrecovery" and to "update" it after other updates...
Click to expand...
Click to collapse
It does us no good I don't think he has plans to build anytime soon.
That's a darn same! It going to be a very long time before we see a working cm9.
Sent from my Milestone XT720 using xda premium
h t t p : / /(delete)w w w. ztphone .com/thread-5919-1-1.html
I DoNt know Whether is true and I tried the Korean version, but stay in M
Hey everyone,
We are currently trying to figure out exactly why some people are hardbricking when the attempt to flash from ICS to 2.3.5 and why others are perfectly fine... we'd like to hear from all the people that attempted to flash back to 2.3.5. Were you using RSD Lite, or a script (what script)? We would much appreciate it if all of tell us your preferred brick method in the poll above, or if your A2 is still up and running .
Also feel free to reply with extra information about the script or xml file you used in the attempt.
Thanks for your pacience in the matter.
cogeary said:
Hey everyone,
We are currently trying to figure out exactly why some people are hardbricking when the attempt to flash from ICS to 2.3.5 and why others are perfectly fine... we'd like to hear from all the people that attempted to flash back to 2.3.5. Were you using RSD Lite, or a script (what script)? We would much appreciate it if all of tell us your preferred brick method in the poll above, or if your A2 is still up and running .
Also feel free to reply with extra information about the script or xml file you used in the attempt.
Thanks for your pacience in the matter.
Click to expand...
Click to collapse
Is there someone out there with a fix for this hard brick issue or is willing to find a fix for this? I'm stuck with this hard brick, many other phones have fix for hard brick, even Atrix 4G with JTAG. Why isn't there a fix for Atrix 2? What is stopping us? I'm not a profesional, I really don't mess with these things like open the phone and solder wires, but if someone manage to unbrick a hard bricked Atrix 2, maybe he/she can let us know how to unbrick it.
Trust me man. The devs are working hard on getting a fix for us. And I am sure that if they find a way to "Un-Brick" the phones affected they will. We will be the first to know.
Remember, this is on their time. Not yours. No offense, but you need to be grateful for the time they are giving us, of their own accord.
For now, try not to hijack the thread and let's stick on topic. Cogeary is just trying to get info to HELP us fix this issue.
darkmixta said:
Is there someone out there with a fix for this hard brick issue or is willing to find a fix for this? I'm stuck with this hard brick, many other phones have fix for hard brick, even Atrix 4G with JTAG. Why isn't there a fix for Atrix 2? What is stopping us? I'm not a profesional, I really don't mess with these things like open the phone and solder wires, but if someone manage to unbrick a hard bricked Atrix 2, maybe he/she can let us know how to unbrick it.
Click to expand...
Click to collapse
Keep this thread clean and on topic. This is not the place to ask for a fix.
Motorola lied and I'm still locked mb865
darkmixta said:
Is there someone out there with a fix for this hard brick issue or is willing to find a fix for this? I'm stuck with this hard brick, many other phones have fix for hard brick, even Atrix 4G with JTAG. Why isn't there a fix for Atrix 2? What is stopping us? I'm not a profesional, I really don't mess with these things like open the phone and solder wires, but if someone manage to unbrick a hard bricked Atrix 2, maybe he/she can let us know how to unbrick it.
Click to expand...
Click to collapse
You could try and contact someone on this list of RIFF Box - JTAG owners... maybe get lucky, or start a project with someone. It looks like our device could possibly be supported:
RIFF JTAG firmware supports following features at the moment:
ARM7/ARM9/ARM11 PXA3xx, PXA270, Cortex-A8, OMAP850, Cortex-A9 Dual cores support;
Click to expand...
Click to collapse
Or, check the out the dealers list, and buy a box and learn how... but it'd probably be cheaper to buy a new phone.. (thanks to hankbizzo5 for dropping the link)
p.s. - With all of the bricks dropping around here, someone with the ways and means could/should start up a little company "resurrecting" A2's and Motos... just a thought..
Edit - sorry mtnlion... saw your post after posting my post... ya, let's keep it clean - starting... now!
I bricked using RSDlite v5.6 (good idea chrisel..)
Maybe also include what version of rsd you're using? I know allot are on 5.6 and maybe 5.7 has something to do with it?
chriselmore said:
Maybe also include what version of rsd you're using? I know allot are on 5.6 and maybe 5.7 has something to do with it?
Click to expand...
Click to collapse
Nope I tied both and I can fxz back and forth all day long... so can a few others.
I have used scripts and rsdlite and they both work for me...
Could there possibly be diff versions of the leak downloaded? Maybe that would explain the diff clock speeds?
chriselmore said:
Could there possibly be diff versions of the leak downloaded? Maybe that would explain the diff clock speeds?
Click to expand...
Click to collapse
Not likely... it is probably because those that are overclocked were overclocked at one time or another, and the chips are able to overvolt now, from the OG hack that was done...
Operating system used? Front usb Ports? Rear?
Sent from my MB865 using xda premium
jimbridgman said:
Not likely... it is probably because those that are overclocked were overclocked at one time or another, and the chips are able to overvolt now, from the OG hack that was done...
Click to expand...
Click to collapse
Hmmmm i was overclocked on scv6 before but it didn't stick through ics. Bit i did have a non stock wallpaper stick through the fxz,ota and ics which i thought was weird...
chriselmore said:
Hmmmm i was overclocked on scv6 before but it didn't stick through ics. Bit i did have a non stock wallpaper stick through the fxz,ota and ics which i thought was weird...
Click to expand...
Click to collapse
Your Google account saves it
Ok, here we go. I was on the leak, bought and downloaded setcpu, set overclock to 1000, set to start on reboot, rebooted and got stuck on att screen for over 20 minutes. Tried factory reset in recovery and it didn't work. Tried to Fzx back to 2.3.5 using jims patch for rsd. Got stuck on bootloader 5/18 and the phone died.
Sent from my SAMSUNG-SGH-I997 using xda premium
tmease1 said:
Ok, here we go. I was on the leak, bought and downloaded setcpu, set overclock to 1000, set to start on reboot, rebooted and got stuck on att screen for over 20 minutes. Tried factory reset in recovery and it didn't work. Tried to Fzx back to 2.3.5 using jims patch for rsd. Got stuck on bootloader 5/18 and the phone died.
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
You got stuck at the boot logo screen? Or on rsdlite?
Sent from my MB865 using xda premium
Fall of Enosis said:
You got stuck at the boot logo screen? Or on rsdlite?
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Boot logo. Then when i tried rsd i got stuck on 5/18 bootloader. That's when the phone took a **** for good.
Sent from my SAMSUNG-SGH-I997 using xda premium
Don't understand much, why all of us used same Fxz file for same phone but RSD shows different steps. Mine showed 19 steps, and stuck at 5/19. Others are 18, 21 ... ?
vinamilk said:
Don't understand much, why all of us used same Fxz file for same phone but RSD shows different steps. Mine showed 19 steps, and stuck at 5/19. Others are 18, 21 ... ?
Click to expand...
Click to collapse
Mine showed 8/20
Not all the FXZ files are exactly the same. darkmixta is on an international released phone, so the fxz for that is different from the AT&T US one, that is why some fxzs have more steps and others have less.
tmease1 said:
Ok, here we go. I was on the leak, bought and downloaded setcpu, set overclock to 1000, set to start on reboot, rebooted and got stuck on att screen for over 20 minutes. Tried factory reset in recovery and it didn't work. Tried to Fzx back to 2.3.5 using jims patch for rsd. Got stuck on bootloader 5/18 and the phone died.
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
I've read elsewhere of another using set CPU and bricking their phone.
Sent from my MB865 using xda app-developers app
gvsukids said:
I've read elsewhere of another using set CPU and bricking their phone.
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
It wasn't setcpu, it was the rsd failure that bricked him... but his setcpu issue that forced him to fxz is peculiar..
Sent from my phone's mind
Moderator Edit: Remember there is always variances between device/regions and this can lead to a brick. As always be careful on what you flash and don't flash
Hello,
This is a fer sure work on:
USA AT&T MB865 2011 VERSION
if your's is not then try it at your own risk
I found out a way to do bootstrap for ICS
Install this app, bootstrap ICS recovery, reboot ICS Recovery.
Well, Cheers!
Resource
PS: It does work, even though it says for razr it works on Atrix 2 Also
Edit: I modified it and made it more atrix 2 like.
Anymore questions please pm me.
tcf38012 said:
Hello,
I found out a way to do bootstrap for ICS
Install this app, bootstrap ICS recovery, reboot ICS Recovery.
Well, Cheers!
Click to expand...
Click to collapse
Where did this come from? Who made it? How has it been tested for our phones? Thanks for the apk, but a little more info is needed before i go willy-nilly installing a bootstrap lol.
You need to research more before posting.there are differences between the razr and the a2.this will not work properly for us.
Motorola lied and I'm still locked mb865
Hey tcf38012, please do your research! You have posted several new threads now that were either incorrect, badly reaserched or just a duplicate thread.
Please refer to this:
http://forum.xda-developers.com/showthread.php?t=1784961
lukensteinz is working very hard to get a solution to OUR ICS CWM issue. The application will be released very soon.
Also I am referring you to this thread, please read it:
http://forum.xda-developers.com/showthread.php?t=1778853
I am not trying to be a jerk here, just that you need to be careful what is put out to everyone. The rules are very important in here, because we like to keep things clean and accurate.
jimbridgman said:
Hey tcf38012, please do your research! You have posted several new threads now that were either incorrect, badly reaserched or just a duplicate thread.
Please refer to this:
http://forum.xda-developers.com/showthread.php?t=1784961
lukensteinz is working very hard to get a solution to OUR ICS CWM issue. The application will be released very soon.
Also I am referring you to this thread, please read it:
http://forum.xda-developers.com/showthread.php?t=1778853
I am not trying to be a jerk here, just that you need to be careful what is put out to everyone. The rules are very important in here, because we like to keep things clean and accurate.
Click to expand...
Click to collapse
Well it works for me, and I'm loving it.
There is a few differences though
And What lukensteinzis better than bootstrap
tcf38012 said:
Well it works for me, and I'm loving it.
There is a few differences though
Click to expand...
Click to collapse
The filesystem layout is all different, so you need to be VERY careful if you run this!
jimbridgman said:
The filesystem layout is all different, so you need to be VERY careful if you run this!
Click to expand...
Click to collapse
Okay Dokey
Cheers!
Our Atrix 2 (not mine now - so sorry) come from many markets with little bit of hardware and software difference, so be careful to post anything here. Maybe it works well on your phone but could give a hard brick on the others.
I think people here should be patient and wait until some testing and confirmation from our trusted Devs. This is extremely time sensitive !
tcf38012 said:
Hello,
I found out a way to do bootstrap for ICS
Install this app, bootstrap ICS recovery, reboot ICS Recovery.
Well, Cheers!
Resource
PS: It does work, even though it says for razr it works on Atrix 2 Also
Edit: I modified it and made it more atrix 2 like.
Anymore questions please pm me.
Click to expand...
Click to collapse
This is the RAZR bootstrap... and just because it boots doesn't mean its working...The current bootstrap we have boots under ICS but isn't fully functional. This is your second time posting a fix with out doing any research. If a newbie spotted this thread, they might install it thinking it works and viola they have a bricked phone. So please unless you REALLY know how to fix things and have dev experience please don't post every possible fix that MIGHT work.
Sent from my MB865 using xda app-developers app
farshad525hou said:
This is the RAZR bootstrap... and just because it boots doesn't mean its working...The current bootstrap we have boots under ICS but isn't fully functional. This is your second time posting a fix with out doing any research. If a newbie spotted this thread, they might install it thinking it works and viola they have a bricked phone. So please unless you REALLY know how to fix things and have dev experience please don't post every possible fix that MIGHT work.
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
And I replaced update.zip from razr with the update.zip from Atrix 2 in the apk.
So It should work for some more phones
Can we have a MOD please lock these random UN-REASEARCHED threads? hopefully it'll keep the brick rate down.
tcf38012 said:
And I replaced update.zip from razr with the update.zip from Atrix 2 in the apk.
So It should work for some more phones
Click to expand...
Click to collapse
dude, are you deaf? did you hear what our DEV'S said?
FOR PEOPLE READING THIS, PLEASE DO NOT USE THIS!!!! IT HAS NOT BEEN PROPERLY RESEARCHED! YOU MAY BRICK YOUR PHONE.
matt99017d said:
Can we have a MOD please lock these random UN-REASEARCHED threads? hopefully it'll keep the brick rate down.
dude, are you deaf? did you hear what our DEV'S said?
FOR PEOPLE READING THIS, PLEASE DO NOT USE THIS!!!! IT HAS NOT BEEN PROPERLY RESEARCHED! YOU MAY BRICK YOUR PHONE.
Click to expand...
Click to collapse
WELL ITS BEEN PROPERLY TESTED AND WORKS ON PHONES FROM USA AT&T MB865 2011 VERSION
ops, sorry my caps lock is on
I think someone should lock this down before we have a flame war happen?
Sent from my MB865 using xda app-developers app
xLordNitro said:
I think someone should lock this down before we have a flame war happen?
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Amen brother ben
And I'm dead sick of people respecting my work :|.
I guess I should just keep everything to myself.
tcf38012 said:
Amen brother ben
And I'm dead sick of people respecting my work :|.
I guess I should just keep everything to myself.
Click to expand...
Click to collapse
It's not you or your work. It's the fact that there have been a lot of hard bricks and we need to be extra careful about releasing anything for the ics leak. It needs to be tested by more than one person. It might work for you but not someone else. We are all being cautious, that's all.
Sent from my MB865 using xda premium
Mods, please delete this thread.
Edit: Anyone else report this?I'm doing so now, though it may be beneficial if more of us do...
Sent from my MB865 using xda premium
Apex_Strider said:
Mods, please delete this thread.
Edit: Anyone else report this?I'm doing so now, though it may be beneficial if more of us do...
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
More Like Mods, please lock this thread.
Some people may want to try it
Or better yet move this to the development section
I locked to stop with the arguments but I will leave the links. As always if you brick your device its no ones fault except your own. We all choose to mod our phones with the risks it posses. If he says it work I'm not inclined to say it doesn't. But devices vary by build and region so to everyone be careful.