Database Info

I think I am in trouble

Hello Everyone,
I have a rogers captivate. I was trying to update to 2.3 android using Odin . I followed the whole process as stated. After rebooting, I got AT&T logo??? and the phone will not boot, go into recovery mode, or connect to my computer. Have I messed up my phone. Please advice.

how did you get an AT&T logo if it doesnt boot?
also what part of the process were you at? gingerbread shouldnt give the white ATT screen
it should give the "i9000" screen with gingerbread.
or were you flashing stock ATT first?
there is nothing wrong with having the wrong boot screen AND A FIX WAS RELEASED LAST NIGHT FOR GB
the fix for stock ATT has been out for a while. AND MY STOCK ROM FIXES IT TOO!
did you read the part about the button combos changing with gingerbread? or if you are on the ATT stock, use old button combos. Also you should have found my stock rom link before flashing, info there too!, its in my sig,
you have to give us more information to help you.

I beleive I was installing it to stock ATT first. That is when this happened. I was on Odin one click install. I remember the phone saying "do not disconnect the target". then all the installation was done from odin. This phone had 2.2 from samsung.Right now all that happens is that the phone starts and a flashing att logo on white background stays..
please let me know what other info is needed. i will post it all to the best possible

boot into download mode and flash ATT stock again. something messed up
are you using the "one click odin" or the other odin?
and what gingerbread are you trying after?

how do i do that. i have tried vol up+down+power combo. still the same flashing logo with no menus. i was using one click odin. and i was still on installing stock android. never got the chance to go to 2.3

If you can't get into download mode through the 3 button way you might need the jig. You got lucky since you're still able to boot up some have perma brick so try the jig and flash back to stock
Sent from my SAMSUNG-SGH-I897 using XDA App

HOLD VOL UP + DOWN
the plug in USB to PC.
keep buttons held until screen comes on!
i asked which gingerbread you were going to do AFTER

What is the build number on your phone, 4 numbers printed under the battery, mine is a 1010 for example, which mean oct. Of 2010 is when it was built. Some phones 1010 and after will not accept the one click odin rom and cause a bootloop like you are having, Try an odin package from TRusselo's sig instead.

my packages dont have the bootloaders. that might be whats screwed up with blinking att boot.
need download first before anything. i do have a GB bootloader package separately

something else:
try removing battery,
plug in USB to PC and Phone
Hold both Volume buttons
put battery back in.
should get you download mode

I really have noidea about what gingerbread i was after, i guess i wanted just the stock android without any custom software from samsung. I am total noob here as far as androids go.
the number on the battery say 2010.12.20 and the last forr nos under the battery at s/n are 11.02.
what is a jig. how do i use it. My phone cannot connect to the computer.
When I try to reset my device by any method, whether usb or power combos, it goes into either a. ATT logo flashing every few secs. or b. battery charging logo with nothing happeining.
Also my phone cannot be seen on my computer

gingerbread isnt for noobs
NOT THE DATE ON the battery
UNDER the battery ON THE PHONE
4 digit number
if you dont know what a jig or gingerbread or any of this stuff is,
you shouldnt have touched your friggin phone!

My apologies. the number is 1102. I understand I have screwed up. Any chance of having a working phone again.

GO GOOGLE A CAPTIVATE JIG AND BUY ONE
you wont be able to make one if you cant follow instructions.
that is your only hope. if not your phone is F'ed up perminantly.
your ONLY HOPE AFTER, is if your phone *somehow stops* turning on *forever*
and you send it back for warranty, and play dumb! ..... ..... ... .. .
PROGRAMMING a phone cant be learned it 5 minutes.
HELL you cant even read the friggin instructions (written for experienced users) in 5 minutes
this was an expensive lesson on researching and learning before doing

hitechchef said:
My apologies. the number is 1102. I understand I have screwed up. Any chance of having a working phone again.
Click to expand...
Click to collapse
Sorry for stepping in..
Yes there is. Might be a little complicated tho. You have some reading to do my friend.
Tru, I'll let you handle it but HiTechChef, you might've to go in for waranty and exchange it saying it did that after you tried to update through Kies. They'll check it and give you another one.

Thanks I will try this method

BWolf56 said:
Sorry for stepping in..
Yes there is. Might be a little complicated tho. You have some reading to do my friend.
Tru, I'll let you handle it but HiTechChef, you might've to go in for waranty and exchange it saying it did that after you tried to update through Kies. They'll check it and give you another one.
Click to expand...
Click to collapse
he's a rogers phone and it boots to ATT screen
it has to *stop* booting to get *warranty*

TRusselo said:
he's a rogers phone and it boots to ATT screen
it has to *stop* booting to get *warranty*
Click to expand...
Click to collapse
Oh right.. Wow..
Yep, go read about a JIG (it's pretty simple to use). You can either build it or buy one from mobiletechvideo or ebay.

TRusselo said:
he's a rogers phone and it boots to ATT screen
it has to *stop* booting to get *warranty*
Click to expand...
Click to collapse
Lol That kind of subtly is lost here... noone is picking up on your suggestion...

and thats how its going to stay,
ive said it before with almost the same words.
ive laid out all the tools....
correction of the original problem is necessary,
research is salvation,
resistance is futile.
there it is... i laughed... all is good again...

How I hard bricked my Captivate (FYI)

Here it goes,
My phone had everything working including 3-button combo.
I successfully upgraded to Gingerbread about a week back and tried Mikey's rom and Icezar's rom.
Last time I was running Continum5.2, decided to downgrade to cognition 4.3.2, without any apparent reason.
Since some one said that you can run Froyo ROm with Gingerbread bootloaders, I decided to keep Gingerbread bootloaders.
Returned to stock JF5 using Icezar's safe method. (The one that does not modifies any boot loaders). Successfully booted to stock and then rebooted to recovery using vol up and power.
Installed Clockwork (2.5) using update.zip. (reinstall packages 2-times), and my phone is in clockwork recovery.
Flashed Cognition 4.3.2, flashed successfully.
Reboot the phone. Nothing happens. It's a hard brick. Have tried almost all the methods to go to download mode, but still unsucessful. I don't see anythng on screen, no light nothing.
Where I went wrong?
Can some one guide about jtag method.

bigbyte.me said:
Here it goes,
My phone had everything working including 3-button combo.
I successfully upgraded to Gingerbread about a week back and tried Mikey's rom and Icezar's rom.
Last time I was running Continum5.2, decided to downgrade to cognition 4.3.2, without any apparent reason.
Since some one said that you can run Froyo ROm with Gingerbread bootloaders, I decided to keep Gingerbread bootloaders.
Returned to stock JF5 using Icezar's safe method. (The one that does not modifies any boot loaders). Successfully booted to stock and then rebooted to recovery using vol up and power.
Installed Clockwork (2.5) using update.zip. (reinstall packages 2-times), and my phone is in clockwork recovery.
Flashed Cognition 4.3.2, flashed successfully.
Reboot the phone. Nothing happens. It's a hard brick. Have tried almost all the methods to go to download mode, but still unsucessful. I don't see anythng on screen, no light nothing.
Where I went wrong?
Can some one guide about jtag method.
Click to expand...
Click to collapse
U got a jig?
Sent from my Captivate using XDA Premium

Zig won't help as nothing is helps only in case of Soft brick.
BTW i figured out where I went wrong, The cognition ROM contains seconday bootloader. So when I flashed it I ended up with Gingerbread primary and Froyo secondary bootloader and hence the Brick. I request all the rom dev to mention at the start of their post if their ROm contains bootloaders.

bigbyte.me said:
Flashed Cognition 4.3.2, flashed successfully.
Click to expand...
Click to collapse
^ That's where you went wrong. Cog flashes sbl. You ended up with one bootloader from 2.3, and one bootloader from 2.2.
There are videos of how to unbrick a perma-bricked phone with a riff box jtag unit on youtube. It'll require you to remove the motherboard and blow $150 or so on a riff box, though.

or you send it to someone with the equiptment, like mobiletechvideos.com and not learn about riff/boxing and spend less money... and and and...
or because it doesnt boot and they cant prove you voided your warranty send it back!

So, this could be avoided doing what?
-Going back to GB stock and from there going back to froyo stock (without 3 button fix)?

I don't think moviletech does crappys something about the solder points too close together.
Edit: but could be wrong.
Sent from my GT-I9000 using XDA Premium App

i was in a similar situation, no 3 button nothing worked my phone wouldn't even power on
but the one method that saved me was this,
Remove battery, SIM card, SD card (if present)
Connect USB cable from computer
While holding down up & down volume, re-insert battery
may be this could help you too.

mobile tech does and has been for over a month, and the first few people are free!
i was able to get myself out of a hard brick, (no buttons no nothing working)
by removing the battery
count to 5
put battery back
DO NOT TOUCH ANY BUTTONS!!!! DO NOT!!! DONT !!!
then put in jig
for me if i touched any buttons the jig would not work.
other methods wouldnt work either.
worth a shot.

You are not the first person I have read about that is not aware that cognition overwrites the boot.bin, and bricked because they flashed it after gingerbread.
Sent from my SAMSUNG-SGH-I897

You messed up with the Bootloader.
Atually I always believe Froyo ROMs should not include Sbl.bin

1tontomato said:
You are not the first person I have read about that is not aware that cognition overwrites the boot.bin, and bricked because they flashed it after gingerbread.
Sent from my SAMSUNG-SGH-I897
Click to expand...
Click to collapse
It overwrites the sbl.bin not boot.bin.
DG put it in so people would always have a 3 button fix(which is contained in the secondary bootloader. sbl.bin)
but with the arrival off the new gb bootloaders means flashing this with those will result in a brick. Guaranteed.

studacris said:
It overwrites the sbl.bin not boot.bin.
DG put it in so people would always have a 3 button fix(which is contained in the secondary bootloader. sbl.bin)
but with the arrival off the new gb bootloaders means flashing this with those will result in a brick. Guaranteed.
Click to expand...
Click to collapse
Yea your right it is the sbl.bin. It was a good idea before gingerbread, but I think it's time has passed especially since it's really easy to get past not having a button combo with a jig. A bad combination of bootloaders is a "brick" for sure.
Sent from my SAMSUNG-SGH-I897

amtrakcn said:
You messed up with the Bootloader.
Atually I always believe Froyo ROMs should not include Sbl.bin
Click to expand...
Click to collapse
Actually, Now I believe that all rom's Froyo or ginger should include either both bootloaders or none.

bigbyte.me said:
Actually, Now I believe that all rom's Froyo or ginger should include either both bootloaders or none.
Click to expand...
Click to collapse
I say none. ANYTIME you touch bootloaders there is a chance of hard bricking. If they don't have any, worst case is a "clay" (soft brick)

TRusselo said:
i was able to get myself out of a hard brick, (no buttons no nothing working)
by removing the battery
count to 5
put battery back
DO NOT TOUCH ANY BUTTONS!!!! DO NOT!!! DONT !!!
then put in jig
....
Click to expand...
Click to collapse
Perhaps I;m not out of the woods yet but a wrong action in ODIN had HB'd my Cappy. Your steps got me back to DL mode. Perhaps it is the 5 count. Patience not being my strong pt I had "not waited" until your recommendation.
I was trying from Continuum5.3 to get back to eclair so to carrier unlock when I made an ODIN error. Still need do that but for now I'll just be thankful that it lives, and move only forward..

its the not touching buttons that makes this trick work
if you replace the battery, what is your normal instinct?
try the power button! or try the button methods...
you are the first to confirm my trick!
congrats!
http://forum.xda-developers.com/showthread.php?t=731989

Use this to get back to stock safely!
[STOCK ROM] Odin3 One-Click Downloader and Drivers CAPTIVATE
use the thanks button!

Hmm very interesting...
I thought your trick worked because it was a screw up in the param.lfs not a bootloader brick, guess not.

im surprised too...

Can't get Vibrant to enter Recovery or Download mode after Odin Flash

Hey well, to start things off I was trying to unlock my T-Mobile SGS4G to work with AT&T but it turns out it needs to be rooted first. I have rooted before and this is the first time I have ran into a problem.
What I did first:
I used Heimdall in an attempt to flash CWM Recovery so I can gain root access. For some reason the zImage was bad (?) and my phone could only get to the T-Mobile logo and then freeze.
Recovery and Download DID work
What I did second:
I used odin3 to flash back a stock T-Mobile rom in hope to fix things... and it did everything succesfully but now it's stuck in a real boot loop.
Can't get into Recovery, nor Download. It's really depressing to keep seeing that battery show over and over again.
Any ideas on how to get my computer to detect my phone again?
Thanks.
Edit:
I did every button combination + usb plug combination known to man. I uninstalled and installed the files again.
Did my phone brick because I ticked the partition tab on odin?
PLEASE help.

Our phone IS NOT the Vibrant. Hopefully someone can help you, but... I don't know. If you flashed OUR stock rom, with bootloaders... you're screwed. But, the fact you have images on your screen, should give you some hope.

Yea, I saw that, but the title says he has a vibrant. I don't know....

Head to the vibrant forum there are some un-brick tools over there...you need to get it in download mode use odin to flash stock froyo vibrant rom.. Should get it back up and running
Sent from my SGH-T959V using xda premium

Kingarabian said:
T-Mobile SGS4G
Click to expand...
Click to collapse
Just to verify, pull out your battery and check if you have the SGH-T959V

One of the "download jigs" may help once you are certain which phone you have and what firmware and ROM you need to flash. You can make your own with a resistor and a microUSB plug, I bought one for $8.00, delivered, (I now see they have them on Amazon for $4, Super Saver eligible) and others have had good luck with even cheaper ones on eBay.
Also: http://forum.xda-developers.com/showthread.php?p=9403915

Jigs are cheap and unless you got the right resistor lying around buy a ready made one. Also if the phone shows up in odin you can download something whatever picture shows up on the screen. Raver has a thread about using heimdall to fix the boot files but its about six months old. Worked for me once. It might even be indexed in the bible under development.
Sent from my SGH-T959V using xda premium

Bricked....Ugh

Ok so I've been rooted and unlocked for a while now, but stayed with the stock rom as when I tried out Synergy Nightlies it gave me some errors. So I went to try out CleanRom 2.1, people liked it and I didn't notice any flashing errors. So I flashed it through CWM 6.0.1 and it gave me the yellow exclamation mark saying I had unauthorized data on my phone. So I followed the sticky on how to unbrick my phone using the 2 boot loaders and the root66 stock image. My issue is that when running the root66 stock image through Odin it fails at _XmitData_Read, which seems to be somewhere in system.img.ext4. I've tried rebooting the computer, the phone, Odin, it just doesn't work. So when I reboot my phone after the failure I get Odin auto loading saying:
Odin Mode
Product Name: SCH-I535
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Official
Qualcomm Secureboot: Enable
Then an image of a phone, 2 dots, a yellow exclamation, 2 dots and a computer are shown with the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
Anyone able to help me?

can you still get to odin mode? also if you have kies installed on the computer erase it.

kidhudi said:
can you still get to odin mode? also if you have kies installed on the computer erase it.
Click to expand...
Click to collapse
Kies isn't installed on the computer and yes I am still able to get into Odin Mode.

I'm under the impression that "unauthorized software" message comes from the locked bootloader (if I'm wrong about that someone plese correct me.)
Sounds like you're functional enough to be able to Odin back to stock and go from there - that's what I'd try. See the stickied thread in the Q&A forum.

I would run the FULL VRALF stock image through ODIN to return to stock. That is always the safest way out of a sticky situation.

Thanks guys, according to another post the version of EZ-Unlock I used most likely gave a false report and never actually unlocked my phone. The problem with going back to stock, which if what I'm trying to do, is that it fails.

Could be an USB issue - an intermittent connection would be most likely to cause problems while sending the system partition since that's the biggest. I've had problems using adb from time to time if I plug into one of the front-panel ports on my PC but no trouble with one on the back.
Maybe try switching ports or try a different cable ...

Actually what usb plug are you using on your computer? You should be using one in the back of your computer by the power supply. Seen the front jacks not work correctly for large transfers. Finally, try another usb cable.
Sent from my SCH-I535 using xda app-developers app

Strange.... i was able to flash syergy on thefirst try. Never used odin during the whole process....
If youre rooted you need to make sure you have a custom recovery in place like cwm or twrp. Make sure you make a nand-backup.
I used casual to flash unsecure bootloader, with that and recovery in place you should be able to flash roms without any hitches....
I could never find a comprehensive guide on using odin so i never got around to testing it

kintwofan said:
Actually what usb plug are you using on your computer? You should be using one in the back of your computer by the power supply. Seen the front jacks not work correctly for large transfers. Finally, try another usb cable.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
So far I've tried 3 different USB cables and both a desktop, both front and back ports and a laptop, each one fails on the write of XmitData under system.img.ext4
I had a custom recovery installed and Odin is only being used to get me back to a stock rom, otherwise I did all my flashing under CWM 6.0.1 or twrp. I think the whole fake unlocked bootloader just hard bricked the software.
EDIT: Come to think of it I remember waking up to my phone in download mode. I think Verizon tried to install the update to my phone while I was sleeping. Granted it failed at the end, but I'm wondering if that did something to brick me now.

If you can get in download mode it can be saved. I woud re download the stock firmware or the 66, but personally i would go bone stock. You may just have a bad download.
Sent from my SCH-I535 using xda app-developers app

kintwofan said:
If you can get in download mode it can be saved. I woud re download the stock firmware or the 66, but personally i would go bone stock. You may just have a bad download.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Yea, I'm currently downloading at the speed of slug the newest update from the forums, will probably just redownload at home, since it's going to take over an hour >.<
EDIT:
Does anyone have a link for an older EZ-Unlocker, that is known to work, so that I don't get this problem yet again.

FIXED!
Ok, so using the newest stock rom from the dev forum worked. Can someone please give me a link to an old EZ-Unlocker so I can flash without worrying about another massive brick in my palm. I'm guessing that running the original root66 stock rom through dropbox somehow corrupted it.

LlirasChosen said:
Ok, so using the newest stock rom from the dev forum worked. Can someone please give me a link to an old EZ-Unlocker so I can flash without worrying about another massive brick in my palm. I'm guessing that running the original root66 stock rom through dropbox somehow corrupted it.
Click to expand...
Click to collapse
I personally suggest not using the app if you already had trouble. Just root your phone using the Debug Root method in Development, download the aboot.img from Adam Outlers thread HERE to your phone, and run the commands at the very bottom in Terminal Emulater app (from the market).
That way you know for sure your bootloader is unlocked. This is what I have done and never had an issue.
Edit: Glad you got your issue resolved!

[Q] Houston, boy do I have a problem!

Just rooted my new SGS3 using New Root Method Released for Verizon’s Galaxy S3, No Odin Required. i did the data & kelvic wipe then install Clean Rom 5.0. All progressed without a hitch. Even backed up with CWM prior to flash.
I rebooted into the new rom and got this: System software not authorized by Verizon Wireless... rebooted several time with same result.
What can I do now? Thanks for your help.

Just a wild guess, but me thinks your bootloader is still locked! But I'm not sure that will even apply because I rooted my device before unlocking the bootloader. But I rooted my device via ODIN first.
You can try EZ-Unlock via the Market. The GUI is still very buggy and will show the status as unknown but the internal workings of the app works good.
You got nothin to loose in trying. Go back to stock and give it another whirl after you've unlocked the bootloader.
Of that fails then I would suggest using the tried and true method..ODIN.
G'luck!

yup your bootloader is still locked
check the downloads thread and use version 1.2.

That means your boatloader is locked. You now must Odin back to stock and start over. Droid style has a guide stickied in the development thread. Follow section 6 of it.
Next time use ez unlock version 1.2 to unlock you boatloader.
Sent from my SGS3 running Eclipse 2.1

downloads list
http://forum.xda-developers.com/showthread.php?t=1850506

tekrhino said:
Just a wild guess, but me thinks your bootloader is still locked! But I'm not sure that will even apply because I rooted my device before unlocking the bootloader. But I rooted my device via ODIN first.
You can try EZ-Unlock via the Market. The GUI is still very buggy and will show the status as unknown but the internal workings of the app works good.
You got nothin to loose in trying. Go back to stock and give it another whirl after you've unlocked the bootloader.
Of that fails then I would suggest using the tried and true method..ODIN.
G'luck!
Click to expand...
Click to collapse
Thanks. I can't get past the warning dialogue screen. Pulled the battery, no good. PC can't see the phone with USB.

Prophotog said:
Thanks. I can't get past the warning dialogue screen. Pulled the battery, no good. PC can't see the phone with USB.
Click to expand...
Click to collapse
Yikes, ok
You have to get into DOWNLOAD MODE.. Power+ Volume Down+ Home key at the same time after a fresh battery pull.
Do a search on the Development forum to set up Odin on your PC.
YOU Must FOLLOW directions EXACTLY our you will have very expensive BRICK!
This forum could help:
http://forum.xda-developers.com/showthread.php?t=1762709
Or even better, this one:
http://forum.xda-developers.com/showthread.php?t=1840030

tekrhino said:
Yikes, ok
You have to get into DOWNLOAD MODE.. Power+ Volume Down+ Home key at the same time after a fresh battery pull.
Do a search on the Development forum to set up Odin on your PC.
YOU Must FOLLOW directions EXACTLY our you will have very expensive BRICK!
This forum could help:
http://forum.xda-developers.com/showthread.php?t=1762709
Or even better, this one:
http://forum.xda-developers.com/showthread.php?t=1840030
Click to expand...
Click to collapse
Thanks to everyone!! Looks to be a long night. :>)

tekrhino said:
Yikes, ok
You have to get into DOWNLOAD MODE.. Power+ Volume Down+ Home key at the same time after a fresh battery pull.
Do a search on the Development forum to set up Odin on your PC.
YOU Must FOLLOW directions EXACTLY our you will have very expensive BRICK!
This forum could help:
http://forum.xda-developers.com/showthread.php?t=1762709
Or even better, this one:
http://forum.xda-developers.com/showthread.php?t=1840030
Click to expand...
Click to collapse
I lol'ed at your post. A little dramatic, don't you think? He's not even close to bricked. Just Odin from download mode back to stock, and redo the steps with bootloader unlock.
Here is a gift (working ez-unlock v1.2)
http://dl.dropbox.com/u/42057363/com.mmmeff.ez.unlock_3.apk

@Techsavvy
Yeah, perhaps a tad overdone on the theatricals.
Cut me some slack, I'm taking acting classes..lol
And... I know... I know..don't quit my day job!

Still having issues. I "think" I am in the download mode. Screen says Downloading.... It has Odin in red in top left corner. Device connects with Odin. BUT I am not getting a PASS message when flashing VRALEC bootchain. Last text line in Odin is: <OSM> Leave CS...
I have tried several attempts.
Suggestions?

Prophotog said:
Still having issues. I "think" I am in the download mode. Screen says Downloading.... It has Odin in red in top left corner. Device connects with Odin. BUT I am not getting a PASS message when flashing VRALEC bootchain. Last text line in Odin is: <OSM> Leave CS...
I have tried several attempts.
Suggestions?
Click to expand...
Click to collapse
No need to do the boot chains. Just follow section 5 of this guide and I recommend root 66 for the ROM you flash
http://forum.xda-developers.com/showthread.php?p=28530394
Sent from my SGS3 running Eclipse 2.1

tekrhino said:
@Techsavvy
Yeah, perhaps a tad overdone on the theatricals.
Cut me some slack, I'm taking acting classes..lol
And... I know... I know..don't quit my day job!
Click to expand...
Click to collapse
I appreciate the theatricals...however, I am having issues with Odin. Can't get the Pass message. I assume the "Downloading..." text means I'm in the download mode. Tried several attempts. I AM glad I'm not close to bricked too! Can't afford $600 or a divorce. Might have to sell a camera instead.

Prophotog said:
Just rooted my new SGS3 using New Root Method Released for Verizon’s Galaxy S3, No Odin Required. i did the data & kelvic wipe then install Clean Rom 5.0. All progressed without a hitch. Even backed up with CWM prior to flash.
I rebooted into the new rom and got this: System software not authorized by Verizon Wireless... rebooted several time with same result.
What can I do now? Thanks for your help.
Click to expand...
Click to collapse
And just for future reference, it's Dalvik, not Kelvic
Sent from my SCH-I535 using xda app-developers app

Prophotog said:
I appreciate the theatricals...however, I am having issues with Odin. Can't get the Pass message. I assume the "Downloading..." text means I'm in the download mode. Tried several attempts. I AM glad I'm not close to bricked too! Can't afford $600 or a divorce. Might have to sell a camera instead.
Click to expand...
Click to collapse
Just a heads up. You can get a real brick with Odin and easy. Follow the guide I linked earlier to a t and you'll be fine
Sent from my SGS3 running Eclipse 2.1

kintwofan said:
Just a heads up. You can get a real brick with Odin and easy. Follow the guide I linked earlier to a t and you'll be fine
Sent from my SGS3 running Eclipse 2.1
Click to expand...
Click to collapse
You are a scholar and a gentleman!! THANK YOU very much. You can have a portrait session on me any time. Name the time and place.

Prophotog said:
You are a scholar and a gentleman!! THANK YOU very much. You can have a portrait session on me any time. Name the time and place.
Click to expand...
Click to collapse
Cool, I take it you're up and running again. Just make sure you use ez unlock 1.2 next time. And the positive is you're an Odin pro now!
Sent from my SGS3 running Eclipse 2.1

Hi, I have a Verizon S3 flashed to Boost Mobile. I tried to gain root by flashing a stock rooted Rom and messed up the flash. I had to take it back to be flashed again  Now I'm more cautious before hand. I should have backed it up before attempting it, I know I know lol can anyone shed some light on how to update a flashed phone as well as how to root it. I could really use the help 
Also after I messed up the boost flash I paniced and flashed a sprint kernel hoping this would fix the problem. Since then anything that I've tried to view including taking camera shots and web browsing if done in landscape mode will be upside down, any remedy for this problem? I know now... root first, flash later. 
Sent from my SPH-L710 using XDA HD

Alex0826 said:
Hi, I have a Verizon S3 flashed to Boost Mobile. I tried to gain root by flashing a stock rooted Rom and messed up the flash. I had to take it back to be flashed again  Now I'm more cautious before hand. I should have backed it up before attempting it, I know I know lol can anyone shed some light on how to update a flashed phone as well as how to root it. I could really use the help 
Also after I messed up the boost flash I paniced and flashed a sprint kernel hoping this would fix the problem. Since then anything that I've tried to view including taking camera shots and web browsing if done in landscape mode will be upside down, any remedy for this problem? I know now... root first, flash later. 
Sent from my SPH-L710 using XDA HD
Click to expand...
Click to collapse
Sprint kernel is causing the inversion. Flash a vzw kernel. Read first flash later.
Sent from my SCH-I535 using xda app-developers app

Who ever did your flash might not done it right cause ya not supposed to lose a flash like that unless he didn't do things right. I can factory reset mine and I wont loose flash
Sent from my SPH-L900 using Tapatalk 2