Database Info

[Q] Bricked(?) European Galaxy Tab P1000 16Gb

Hi every body,
To start with, in order to avoid asking stupid questions, I've been trying to fix the problem and searching posts for about a month now (ironically, this might have been my mistake, trying everything possible
The answer to the question "why the heck did you do such a stupid thing?!" can be found at the end of the post, for those who has the time for others who are willing to help, and I'd be thankful for any, here are the details:
Device:
European Galaxy Tab P1000 16Gb 3G
Serial Number: you wish! )
Device is rooted and HAD the latest official update provided with Kies
Current state:
- Device stuck at the Samsung Galaxy Tab screen
- No recovery mode (volume-up + power on)
- Download mode still works (volume-down + power on
How did it happen:
It all started as I replaced the framework.jar and a couple of other libraries using adb (why the $$$$ No. 1). this would have been no problem, if I have left usb-debugging switched on after that, but I switched the usb-debugging off(why the $$$$ No. 2). After that I couldn't restore them using adb, logically...
I tried flashing several frameworks with no success. at the beginning, my mistake was using wrong combination of pit-files and roms.
The cause of all evel:
at a certain point I decided flashing with the clear efs option selected (why the $$$$ No. 3). Now I know I shouldn't have done that. especially that I have no backup of the original efs.
What does NOT work
Flashing with Odin or Heimdall theoretically works (I get no errors, the process finishes successfully and the device restarts). Still, it's stuck at the same Samsung Galaxy Tab screen, and still no recovery mode (volume-up + power also shows the same screen).
I tried flashing different samfirmwares and Rotos (using the propper pit-files and stricktly following instructions) to no avail.
I also tried flashing both with the sim and sd-card in the device, and after removing them.
so please HEEEEEEEEEEEEEELP!
why the $$$$ did I have to do this :
1. replacing firmware.jar: I wanted to add native arabic language support and I found this post on the internet providing instructions and jars - of course, it was a mistake to do it, but it's too late for that now, isn't it
2. switching the usb-debugging off: I wanted to copy files to the external card. I have no idea what I was thinking! first of all, I should have first tested whether the stupidity in point 1 have worked, second of all I can still access the sd-card with the debugging switched on! but I didn't know that at the time.
3. clearing the efs: Now, you didn't expect a logical explanation here, did you? ) I was frustrated and said what the heck! Ok ok, have your laugh, call me stupid and all you want - I deseved it
So, once again, any help would be just great!
Thanks in advance,
Moh

If your EFS is gone then you'll need to take the device to Samsung for repair. Samsung may be able to regenerate the EFS data based on the hardware, or they'll have to replace the mainboard.

Benjamin Dobell said:
If your EFS is gone then you'll need to take the device to Samsung for repair. Samsung may be able to regenerate the EFS data based on the hardware, or they'll have to replace the mainboard.
Click to expand...
Click to collapse
I thought so But then again, hope dies last
Thanks anyway

[Q] samsung galaxy player 50

My sister have a Galaxy Player 50 with eclair...this PMP seems to be the same as the galaxy 3 (same resolution...and some other things) so can I flash lestatious or other rom on it ?
This hardware is not a phone...but maybe ?
Maybe I can try to flash...but if the pmp become soft bricked...it's over since i can't found an galaxy's 50 firmware...

Darius, I'm stuck with a brick galaxy player. I can try to flash with a galaxy 3 firmware if you want
Do you know how to make a dump of your device so you can share with me the original firmware?
http://forum.xda-developers.com/showthread.php?p=14493414

I don't know...but I'll try to find

Thanks!
I tried the firmware of galaxy 3, but didn't work

I dont think that its possible, first of all, despite being an android device, it doesnt have radio features, gsm 3g etc, only wifi, there are features that our phone does not support

Anyone found a solution for this yet? Not being able to test this device to it's full potential is really frustrating. Games are laggy and apps just do not run smooth on this one.
Has anyone tried z4root on this? I did and it freezes at "acquiring root shell".
@fedeff: how did you brick it?

Darius_AWS said:
My sister have a Galaxy Player 50 with eclair...this PMP seems to be the same as the galaxy 3 (same resolution...and some other things) so can I flash lestatious or other rom on it ?
This hardware is not a phone...but maybe ?
Maybe I can try to flash...but if the pmp become soft bricked...it's over since i can't found an galaxy's 50 firmware...
Click to expand...
Click to collapse
First root using One click root.
Give these commands in Terminal emulator
su
mount
Check for system partition.Suppose it is stlx (x=6,7,8 etc depending on system partition)
give this command to dump system...
dd if=/dev/block/stlx of=/sdcard/factoryfs.rfs
Copy it from sdcard and upload. I need to check it then i can help u out.

arunmcops said:
First root using One click root.
Give these commands in Terminal emulator
su
mount
Check for system partition.Suppose it is stlx (x=6,7,8 etc depending on system partition)
give this command to dump system...
dd if=/dev/block/stlx of=/sdcard/factoryfs.rfs
Copy it from sdcard and upload. I need to check it then i can help u out.
Click to expand...
Click to collapse
I'd gladly try it as long as Samsung gives me firmware, don't want to end up with a nice looking little brick here.
Is there any way that that an installer/firmware file could be saved in the device for backup purposes or something?

anon3524 said:
I'd gladly try it as long as Samsung gives me firmware, don't want to end up with a nice looking little brick here.
Is there any way that that an installer/firmware file could be saved in the device for backup purposes or something?
Click to expand...
Click to collapse
factoryfs.rfs is ur firmware backup....

@arunmcops: Thanks for the instructions. If someone try this and upload it'd be great for me.
@anon3524: I accidentally reseted the device to factory, trying to fix a problem with wifi (it suddenly stopped working one day).

arunmcops said:
factoryfs.rfs is ur firmware backup....
Click to expand...
Click to collapse
Ok, I am down to do this process you just explained as long as you or anyone explains to me how to recover the device with this "factoryfs.rfs" in case it gets bricked. You'd have to explain with detail how to grab this file and what to do with it etc. Also, if you could give further details on the initial process, that'd be great since a few things are unclear (to a brave noob like me).
Other than that, I am willing to try it to see the results.
BRING IT OON! *warface*

@arunmcops - I've got one of these, so have uploaded the file you wanted here - sorry, not allowed to post links yet:
dl.dropbox.com/u/6491656/Samsung/factoryfs.tar.gz (please don't flash this, its not a full rom)
I haven't made any changes to the base firmware other than renaming a couple of the phone.apk's to .old (cell standby was eating battery, and this device doesn't have a sim).
For fun, i've also uploaded a dmesg log
dl.dropbox.com/u/6491656/Samsung/dmesg.log
One other thing, i think the partition layout might be slightly different on this (might be wrong, don't have the phone) in that the internal sd card is mounted as /sdcard and the external one is /sdcard/sd.
Hope this helps!
Chris

@ctaylr Thanks for uploading the file.
I tried to load it using Odin, but it get stuck while uploading the file. The device is detected, but I think it's not transfering anything.
Is it possible to restore it form sd card?

fedeff said:
@ctaylr Thanks for uploading the file.
I tried to load it using Odin, but it get stuck while uploading the file. The device is detected, but I think it's not transfering anything.
Is it possible to restore it form sd card?
Click to expand...
Click to collapse
Hi...thats probably because it isn't intended as a flashable rom. Its just a dump of the stock firmware so that arunmcops asked to see to see if it had any resemblance of the galaxy 3 f/w, to see what we'd have to do to get a working custom ROM on this device..
Please don't attack it with any kind of Norse God ...especially until there is a confirmed route back to stock. All thats contained in the files is what you have on your device already - so there is also absolutely no point (for now).
If your having trouble with your device now, you could try doing a factory reset or playing about in Kies - i've fixed my device once after I got curious and flashed a custom ROM on here (which fyi completely messed it up - something like E:multi_csc: error: open /efs/imei/mps_code.dat because we dont have an IMEI code on this device) and then got it back working again - unfortunately i can't remember exactly what I did. Otherwise if this doesn't work I'll see if i can make a working stock package for Odin.

@ctaylr, yes I'm having problems with my device. It got soft bricked. I couldn't make it work using Kies. The only thing I can do is to start it in Download mode. If you can make a working package for oding that'd be great
This might help
http://forum.xda-developers.com/showpost.php?p=9515709&postcount=14
Thanks!

@fedeff Ok. i'll have a look over the weekend and see if i can make something that flashes.
Quick questions
1) do you have the 8gb or 16gb version?
2) have you tried going into recovery utils and doing a "wipe data/factory reset?" - you can do this by holding down home, volume down and volume up while turning the unit on - i seem to remember this fixed it for me, but it probably depends on how far Odin got while flashing. If your unit is already bricked, i can't see it doing much further harm
Thks

ctaylr said:
@fedeff Ok. i'll have a look over the weekend and see if i can make something that flashes.
Quick questions
1) do you have the 8gb or 16gb version?
2) have you tried going into recovery utils and doing a "wipe data/factory reset?" - you can do this by holding down home, volume down and volume up while turning the unit on - i seem to remember this fixed it for me, but it probably depends on how far Odin got while flashing. If your unit is already bricked, i can't see it doing much further harm
Thks
Click to expand...
Click to collapse
1) I have the 8gb version
2) By doing "wipe data/factory reset" is how I got it soft bricked. (the device wifi suddenly stopped working, and I thought that would help) After that it kept entering in the recovery mode. Then I tried to flash it with odin, now the only thing I can do is enter the download mode
Thanks again for helping me!

News?
Hi! I also like the others I am interested because my Galaxy player has 50 brick and I need someone to do dump the firmware so I can flash through odin! Please would you be my salvation and many other who have this player and would like to fix without waiting for the assistance of a month
Waiting for an answer I greet and thank all users who want to help me
sorry if English is not correct, but I'm using google translator (I'm Italian)
EDIT:
listen to me: http://forum.xda-developers.com/showthread.php?t=726673 This is the guide on how to get the dump of your fimrware if someone kindly did this process with its galaxy player 50 and then upload the file . tar obtained would help all

I don't think it is as simple as that.
If you fully read that topic above, it tells you. That will ONLY tarball the files in the /system folder. It doesn't dump the the bootloaders, efs or produce the initrd, which is also part of the firmware.
In fact that backup is exactly what i linked to earlier here, and doesn't flash properly through Odin. I don't know Odin very well (i use a ZTE Blade and clockworkmod normally ) but i'm going to take an educated guess it needs all of this information to successfully flash the player, and trying to flash without all of that probably won't work so well.
If i'm wrong, please let me know and i'll do what i can to help.

ctaylr said:
I don't think it is as simple as that.
If you fully read that topic above, it tells you. That will ONLY tarball the files in the /system folder. It doesn't dump the the bootloaders, efs or produce the initrd, which is also part of the firmware.
In fact that backup is exactly what i linked to earlier here, and doesn't flash properly through Odin. I don't know Odin very well (i use a ZTE Blade and clockworkmod normally ) but i'm going to take an educated guess it needs all of this information to successfully flash the player, and trying to flash without all of that probably won't work so well.
If i'm wrong, please let me know and i'll do what i can to help.
Click to expand...
Click to collapse
ok then I'm sorry I read the topic in a hurry and did not realize that you can not do what I say but re-reading now I understand!
ctaylr what do you advise me to do then? wanted to try an get into recovery and restore but I think the 3 keys are disabled enters only download ..
Google traductor sorry

[HELP] Looking for Stock Rom for Alcatel OT-983

Hello, and hope this is the right place to post this.
So, without any knowledge about all this smatphone/android stuff, I finally got one by a really good price. An ot-983.
Some friends conviced me to root it. I found a way to do it and noticing all the bloatware from it's original carrier (this phone was carrier unlocked when bought) I decided to clean up a bit.
I ended up cleaning a lot of stuff that I simply didn't use from a \custapp\ folder in there.
Thing is, a day latter I got a notification of a firmware update and I just said yes.
The said update failed, complaining it seems about the lack of some of the deleted bloatware.
Now, here's when the lack of thinking shows.
Wondering about it, I decided to look around options and found the factory reset.
Being a new and mostly empty phone, I did it (wiped clean the sd too),
And there, it went all into hell!
After reboot, it can't get my wireless anymore (have to use a static ip workaround for it...)
Root Checker says it's not properly rooted (using the same rooting technique as the first time doesn't fix it)
superuser still seems to be working, altho it crashes now and then with some errors about permissions.
also, can't get BusyBox working because it says there's no su binary and I can't download an update for it.
In short, I guess I need to get this phone to it's basics, if possible unbranded.
I don't really know what I need for that, but here I am, reaching at you that might help
I guess I need a stock rom and a way to flash it.
I'd appreciate a lot any help on getting whatever it is needed.
*cheers

root alcatel ot 983
ahkronn said:
Hello, and hope this is the right place to post this.
So, without any knowledge about all this smatphone/android stuff, I finally got one by a really good price. An ot-983.
Some friends conviced me to root it. I found a way to do it and noticing all the bloatware from it's original carrier (this phone was carrier unlocked when bought) I decided to clean up a bit.
I ended up cleaning a lot of stuff that I simply didn't use from a \custapp\ folder in there.
Thing is, a day latter I got a notification of a firmware update and I just said yes.
The said update failed, complaining it seems about the lack of some of the deleted bloatware.
Now, here's when the lack of thinking shows.
Wondering about it, I decided to look around options and found the factory reset.
Being a new and mostly empty phone, I did it (wiped clean the sd too),
And there, it went all into hell!
After reboot, it can't get my wireless anymore (have to use a static ip workaround for it...)
Root Checker says it's not properly rooted (using the same rooting technique as the first time doesn't fix it)
superuser still seems to be working, altho it crashes now and then with some errors about permissions.
also, can't get BusyBox working because it says there's no su binary and I can't download an update for it.
In short, I guess I need to get this phone to it's basics, if possible unbranded.
I don't really know what I need for that, but here I am, reaching at you that might help
I guess I need a stock rom and a way to flash it.
I'd appreciate a lot any help on getting whatever it is needed.
*cheers
Click to expand...
Click to collapse
pls i need you to explain to me carefully , step by step how you rooted the alcatel ot 983 , pls i have searching for the past weeks on google without results , pls help me , pls explain carefully , thanks in advance , i will be so happy if you help , thanks again in advance

mohamm said:
pls i need you to explain to me carefully , step by step how you rooted the alcatel ot 983 , pls i have searching for the past weeks on google without results , pls help me , pls explain carefully , thanks in advance , i will be so happy if you help , thanks again in advance
Click to expand...
Click to collapse
I simply downloaded the drivers from alcatel website
and then used the root package from here: <can't post outside links. it's a thread on error-soft dot net
Followed the instructions on the .txt included and it worked.
After that I think I had to install Superuser app (from live store)
be careful. My problems came from deleting some stock apps included and then doing a firmware update.
so, don't delete stuff around if you're thinking in doing the upgrade.

I need original stock alcatel ot 983 rom
hi guys
I bricked my ot 983 after flashing with different alcatel models rom
can some one please give me a copy of original stock rom for alcatel one touch 983
please
my email [email protected]

maybe your handheld is a brand new and nobody mod it yet
be patient bro and keep searching in google with any keyword

help me make tutorial on youtube
ahkronn said:
I simply downloaded the drivers from alcatel website
and then used the root package from here: <can't post outside links. it's a thread on error-soft dot net
Followed the instructions on the .txt included and it worked.
After that I think I had to install Superuser app (from live store)
be careful. My problems came from deleting some stock apps included and then doing a firmware update.
so, don't delete stuff around if you're thinking in doing the upgrade.
Click to expand...
Click to collapse
bro i dont know much about android stuff , but pls can you make a tutorial on youtube like this you can help me and millions out there for rooting the phone , ps help and thanks so much in advance

ahkronn said:
I simply downloaded the drivers from alcatel website
and then used the root package from here: <can't post outside links. it's a thread on error-soft dot net
Followed the instructions on the .txt included and it worked.
After that I think I had to install Superuser app (from live store)
be careful. My problems came from deleting some stock apps included and then doing a firmware update.
so, don't delete stuff around if you're thinking in doing the upgrade.
Click to expand...
Click to collapse
Where did you get the upgrade from ?

My story is like this: rooted, uninstalled some bloat from system and after a factory reset I'm stuck in the initial setup wizard (after completing almost all stages from setup it crashes at the end, after connecting at the google account - tryed to ignore that step but either way it crashes). Fastboot works but adb don't.
I do have another identical phone Alcatel One Touch OT-983 but with no root, with no modifications. Is there a way to backup the original/stock image and flash it over the malfunctioning one and restore it??
I tried with the proprietary upgrade tool from Alcatel but no succes as it close saying I don't need an upgrade because it's the last version of software installed in my phone. I thought even to broke intentionally the rom but I'm afraid that the upgrade utility from Alcatel will let me down, as I read that another users didn't managed to complete successfully the upgrading process. Is there a way to trick the system that has a previous version of Android?
Thank you for taking your time to read this and hope someone has an idea to solve our problem.
Have a nice day guys, you can contact me at puiocku at gmail dot com.

Have someone this stock rom (for Alcatel One Touch 983 (Valencia)) ???

Here is a Alcatel OT-983 rom, not sure which country it is from: https://www.dropbox.com/s/g2ljtrpqru3uihm/rom 983.zip?m
Here is my o2 uk backup rom: http://www.mirrorcreator.com/files/C4VEKHEI/OT-983_backup_uk.rar_links
this .zip file contains the boot.img, system.img and recovery.img
Someone needs to create a clockwork mod recovery for our phones now.

here is the sourcecode for this phone: http://www.mirrorcreator.com/files/85KDRTYP/OT_983_20130103.7z_links

Can't get to recovery
I have a bricked rooted OT 983, by error i installed a ZTE Blade's CM9 ROM and now i can't get my phone to recovery by using ADB that is the only way, i have downloaded the stock ROM but i don't know how to install it. :crying: PLEASE HELP!!!!!!!!!!!!!!!!!!!!

i done the same
Please help!! my phone is stuck on
jrdsetupwizard has stopped
cant get past setup screen

Possible solution for getting back original ROM on "stuck" phone
ryanraven said:
i done the same
Please help!! my phone is stuck on
jrdsetupwizard has stopped
cant get past setup screen
Click to expand...
Click to collapse
I recently "semi bricked", if my Alcatel OT983, if that's possible. It would not boot fully and got stuck on the "jrdsetupwizard has stopped" screen.
Here's what I did. The issue with getting the Alcatel One Touch Upgrade software to work appears to be getting the correct USB Driver installed. There are a number of potential USB drivers. This phone needs the driver in the Alcatel One Touch Upgrade. The stock Windows one or the one used for rooting the phone using instructions from the errorsoft website from the oneofgod will not work with this upgrade procedure.
1. Download the Alcatel One Touch Upgrade software and install on your machine. Open up the folder where the software is installed.
Look inside the folder that is called USB Driver and look inside the appropriate folder for your type of Windows machine 64bit or 32bit (x86) and install that driver for USB - that is the correct one for the upgrade
2. Run the upgrade software whilst connected to the internet. Connect your phone when it is off. You should just get the Android icon i.e. not charging or anything else. The icon should just stay there all the time the process takes place.
3. The upgrade will download. It's when the process gets to about 70% that the phone the starts upgrading. It will take a few moments but when it starts progressing into the late 70s and 80s you should be well on the way. At least that's how it went for me and I got my phone back!
Hope this helps.

to Hajj_3 :
Tanks for share the ROM.. I need it to recover my friends phone..

I just got this phone, not looking to root it yet as theres no option for a custom rom yet.
didnt want to start a new thread as theres not really any section for this phone yet.
Everything was fine until i installed the firmware update. Now applications cannot access the mic. Some complain about it being in use by another app. others like video editor or sound recorder will record, but the video recorder there is no file, and sound recorder crashes when you hit stop.
Alcatels website is useless, wasnt working yesterday, today it is but cant find any contact details incase its a bug in there firmware. Everything works fine except for that. Which is annoying because i use RTA software and now it doesnt as it cant access the mic.
any ideas?

Hi guys,
I've rooted my phone with abd and udpate.zip a long time ago, and it was fine till some days ago it stopped from receiving calls and the home button does nothing when pressed, although in recovey mode it works.
I've done a hard reset, reflashed the recovery.img, system.img and boot.img I've found in this post with fasboot, but did not solve the problem.
I've tried a firmware update with Alcatel's own software but it just keeps saying my firmware is updated already. I've also tried to edit the proinfo file, but I don't know what to change in the file. You can see more about that method here: http://forum.gsmhosting.com/vbb/9772370-post8.html
My guess is that the files that are corrupted and preventing me from receiving calls are somewhere else than those img's I've flashed. Has anybody got a FULL backup of his rom (e.g. Rom Manager) so I can recover the phone completely?
Thanks!

upgrade software
bussand said:
I recently "semi bricked", if my Alcatel OT983, if that's possible. It would not boot fully and got stuck on the "jrdsetupwizard has stopped" screen.
Here's what I did. The issue with getting the Alcatel One Touch Upgrade software to work appears to be getting the correct USB Driver installed. There are a number of potential USB drivers. This phone needs the driver in the Alcatel One Touch Upgrade. The stock Windows one or the one used for rooting the phone using instructions from the errorsoft website from the oneofgod will not work with this upgrade procedure.
1. Download the Alcatel One Touch Upgrade software and install on your machine. Open up the folder where the software is installed.
Look inside the folder that is called USB Driver and look inside the appropriate folder for your type of Windows machine 64bit or 32bit (x86) and install that driver for USB - that is the correct one for the upgrade
2. Run the upgrade software whilst connected to the internet. Connect your phone when it is off. You should just get the Android icon i.e. not charging or anything else. The icon should just stay there all the time the process takes place.
3. The upgrade will download. It's when the process gets to about 70% that the phone the starts upgrading. It will take a few moments but when it starts progressing into the late 70s and 80s you should be well on the way. At least that's how it went for me and I got my phone back!
Hope this helps.
Click to expand...
Click to collapse
The problem is, the upgrade software link doesn't work anymore :\.
ht tp: // ww w1. alcatelonetouch.com/global-en/ support/download/one_touch_ 983.html
(remove of spaces, im a new user so they won't let me post one)
Is there anyway someone can find a link for it because i have been searching for ages and haven't found one.

http://www.alcatel-mobilephones.com/global-en/support/download/one_touch_983.html

[ROM][ODIN] P500VPBMB3 Sprint 4.1.2 Firmware

P500VPBMB3 Sprint 4.1.2 Firmware
For some unusual reason there is little to no development for the SPH-P500 and absolutely ZERO official firmware available for the Sprint model. This means, if you soft brick the tablet trying to install something you should not have, you have no easy way of getting back to the stock firmware. In addition, getting to the 4.1.2 version of the firmware is a royal pain due to the massive amount of "PATCH CHECKS" and assert checks built in to the OTA update. This means any deodexed system or a number of other reasons will be rejected if you try the OTA update while on non-official or approved firmware. So, for your convenience, I have compiled a simple ODIN-Flashable TAR file which will jet you up to speed installing the latest official Sprint 4.1.2 firmware.
Details:
P500VPBMB3 Stock w/ MB3 Modem
Package Includes: BOOT, RECOVERY, SYSTEM, MODEM AND CACHE ZONES
Download:
P500VPBMB3 Sprint 4.1.2 Firmware
Password on the archive is: www.mobiletechvideos.com
How To Flash:
BACKUP YOUR FILES AND DATA BEFORE FLASHING...ALWAYS. First extract this file using WinRAR or a program capable of extracting a RAR package as the package inside it is the TAR file you need. This was done to save time on the download. Once extracted, using ODIN, select PDA and choose this file. Now place your tablet in DOWNLOAD MODE by having it powered off, then power on by holding POWER and VOLUME DOWN until you see the on-screen text come up. Release the buttons and press VOLUME UP to enter DOWNLOAD MODE. Now click START on ODIN. Once completed (takes around 10 minutes), it is advised to enter RECOVERY MODE and perform a FACTORY DATA RESET for the best bug free experience since I don't know what ROM you are flashing from.
Did this help you out? Great, I'm glad it did! Click that THANKS button next to my name if you have the time. Please note, if you find yourself in a hard/soft brick situation of any type on any advice, give me a shout via PM or email through the contact page on our site. We also offer repairs on a number of other issues.

27 downloads and nothing? I'd love some feedback so others can be confident in the firmware.

It´s a disease from all P31XX and P51XX useres don´t hitting the thanks button and don´t giveing feedback... maybe they don´t want any support.... (?)...
i don´t have a P51XX - i can´t give other feddback then this... sorry....

Haha it seems that way! Well thanks for your response. Nice to hear from somebody about this. For some reason the Tab 2 10.1 forum members seem to be dead but want development anyhow without any input!

There are a lot of people here in a german forum there is mostly nobody ...
i hope you get some feedback! if not: there is not problem first things that will reported are problems

Haha, how true! No news is good news right?

problem and feedback if it works...
Hi. I am pretty new here (although I have been a member for a while, I have not really been active). I do have a Sprint Samsung Galaxy tab 2 10.1 inch display model P500VPBMB3. Perhaps I can try out what you are talking about if it helps me with my problem below and then I will be more than happy to give you feedback.
PROBLEM
I never really rooted a device before but I am at a loss here since the current version of Android that I have on my device is 4.1.2 . It's working OK but I run out of space very often since I only have 16GB of main memory. I would love to upgrade to 4.2.x so that I have the option of storing apps on the external SD card. I am not clear exactly what you are giving us here on your thread. If you can explain it to me and especially if it does what I am outlining above I would want done, I would love to give it a shot and then give you some feedback.
Either way thank you for helping is Sprint tablet people whether or not what you have above will help me.
Thanks

shmusie said:
Hi. I am pretty new here (although I have been a member for a while, I have not really been active). I do have a Sprint Samsung Galaxy tab 2 10.1 inch display model P500VPBMB3. Perhaps I can try out what you are talking about if it helps me with my problem below and then I will be more than happy to give you feedback.
PROBLEM
I never really rooted a device before but I am at a loss here since the current version of Android that I have on my device is 4.1.2 . It's working OK but I run out of space very often since I only have 16GB of main memory. I would love to upgrade to 4.2.x so that I have the option of storing apps on the external SD card. I am not clear exactly what you are giving us here on your thread. If you can explain it to me and especially if it does what I am outlining above I would want done, I would love to give it a shot and then give you some feedback.
Either way thank you for helping is Sprint tablet people whether or not what you have above will help me.
Thanks
Click to expand...
Click to collapse
You will actually want to look into custom recovery combined with a custom ROM to enable this type of option. What I have provided here is a stock firmware (stock operating system). This is actually already what you have installed on the device.

connexion2005 said:
You will actually want to look into custom recovery combined with a custom ROM to enable this type of option. What I have provided here is a stock firmware (stock operating system). This is actually already what you have installed on the device.
Click to expand...
Click to collapse
Thank you very much for your prompt reply. You seem to be a helpful sort of person. I am sorry to be so dense but I have no idea what those things are. Is there a place where I can, sort of begin from scratch to learn all about these things or can you please fully explain what I need to do here?
I get that yo said that what you are offering is what I already have. What I don't understand is what exactly what to look for. I do know that if I install the wrong thing, I can brick my device. What I don't know if how to find what I am looking for. I already tried it in the search box-that's how I got to your thread.

This is honestly a very tough section as the P500 is a rare unit that has little to no development. You are in the right sub-forum but finding any mods for your unit may not be possible at this time unfortunately.

Thank you, thank you, thank you!!!!! You can root with Kingo root and make modifications with xposed. I just have been so busy with work.
I will flash this when I have time. Now I can be more risky with flashing because I can now go back to stock ROM.
Sent from my SM-N900P using Tapatalk

Android-Andi said:
It´s a disease from all P31XX and P51XX useres don´t hitting the thanks button and don´t giveing feedback... maybe they don´t want any support.... (?)...
i don´t have a P51XX - i can´t give other feddback then this... sorry....
Click to expand...
Click to collapse
Hello, I know its been almost a year, but I tried to flash this ROM and get stuck after the tab reboots with the message "POWER RESET or UNKNOWN UPLOAD MODE", is there anything I can do to restore the tab (I did not do any backup).
Thanks a bunch

Do you have the Sprint model? If so, try re-downloading it and flashing again. Afterwards, perform a factory data reset.

connexion2005 said:
Do you have the Sprint model? If so, try re-downloading it and flashing again. Afterwards, perform a factory data reset.
Click to expand...
Click to collapse
The tab comes from China but in the options i've seen SPH-P500 so I supposed it was a model made for Sprint.
I did flash again and reset factory but nothing changed.

meresis said:
The tab comes from China but in the options i've seen SPH-P500 so I supposed it was a model made for Sprint.
I did flash again and reset factory but nothing changed.
Click to expand...
Click to collapse
That is definitely unusual though the fact it came from China. This likely is NOT the right firmware for your model. The back of the unit should have the model number. See what it says...

connexion2005 said:
That is definitely unusual though the fact it came from China. This likely is NOT the right firmware for your model. The back of the unit should have the model number. See what it says...
Click to expand...
Click to collapse
Indeed the back says P5110 ... Chinese devices ... Thanks a lot ! :good:

P500
Wow!! I made a mistake!! I bought this tab to have some fun rooting and installing custom roms. I should have checked the forums first to see if there was any support. Thanks for what you've provided here. I'm going to at least try to root and install xposed.

I have a sprint gtab2 10.1 that's out of contract, so i'm willing to start working on things if needed.

if we no longer need to use the Sprint data can we flash a SPH-P5100 rom for wifi only ?

resurrecting an old thread. Need to find the original firmware for sph-p500. This appears to be it, but I can't find or get the password to the .rar file. I can't find the firmware anywhere else after a TON of google searches. any help appreciated in either getting the password to the .rar file, or a different place to download the firmware.

Nobis NB07 and DA-741QHD rooting and ROM thread

Tech Specs:
Processor Type: Quad-Core Cortex A9 Processor(When I turn on the tablet it says Allwinner A31?)
Processor Speed: 1.20 GHz
System Ram: 1 GB
Hard Drive Size: 8GB
Laptop Screen Size: 7 inch
Screen Type: Capacitive Touch Display
Battery Life: 4 hours
Battery Type: 2800mAh Lithium Ion
Network Connection: 802.11b/g/n Wireless LAN
Connector Type: 1 x HDMI, 1 x Headphone, 1 x MiniUSB 2.0
Operating System: Google Android
Accessories Included: AC Adapter,USB Cable
Operating System Version: Android 4.2 Jelly Bean
This thread is a continuation of some of the discussion that was from this thread: http://forum.xda-developers.com/showthread.php?t=2568427
While not at all high end tablets, it's always fun to see what can be squeezed out of them! As stated in the title, this thread will be regarding the following devices: Nobis NB07, Iview 774TPC, and DA-741QHD (which all appear to be the same hardware) rooting and ROMs. That should be pretty simple for now since, we currently have no ROMs and no proven root method. Some have reported success using the Kingoapp. If anyone is able to obtain root, we would like to ask that you make a copy of the firmware and upload it for those of us having trouble doing so. After doing so, we can modify it and hopefully get more our of the software.
You may also post information regarding tweaking the ROMs for these devices and other ways to make them more useful!

Warning: The following may have unforseen effects including breaking your tablet to the point of being unrepairable.
Option #1, Use KingoApp Some users have reported that this did not work for them, at least one user reported that it did.
Instructions per RawX:
For the drivers the easiest method is just using Top Notch Tablets How to install ADB drivers. That worked on the first one, the second one it didn't not entirely sure why, but you can send a email to support and ask them for development drivers for the nobis tablets and they will send the ADB drivers you need. After you have the drivers installed use kingo while the tablet is in usb debug mode BEFORE plugging it into your usb port and do not turn on usb transfer. the first time after it reboots kingo will report that it was not rooted, leave it plugged in and power off and back on and it should report the root worked. This method gives you SuperSU. Both times. I've done this were for clients of mine but its pretty straight forward.
Click to expand...
Click to collapse
The working drivers for me were: VID_1f3a_PID_efe8
Please consider trying this first and give us some feedback. A word of warning though, there has been some discussion on XDA in the past that this may be malware though I'm not sure this was ever confirmed.
Option #2, Flash firmware for an alternate device that can be rooted easily. Warning!!! Currently, there is no way to get back to stock (until someone who gets root with another method makes a copy of the firmware)
Go to this website: http://www.iviewus.com/firmware788TPC/ and download the firmware. Yes, it is for another tablet. However, the tablet appears to have the same specs as ours. Once downloaded. Install the included PhoenixSuit software. Once it is running, click the button at the bottom right to update the software to the newest version (this may not be required). Then, plug in your tablet using the usb port and install the drivers. I used google and found them all within minutes. Once the software recognizes your tablet go to the firmware tab where you have extracted the .img file and select the file. Next, click upgrade to upgrade your tablet (it has instructions to help your tablet be recognized if you are having difficulty). Once the new firmware has been flashed, then download the file RootFromOTA.zip that can be found on various places such as XDA. Move the file onto an external SD card. Then, go to settings -> backup & reset -> Recovery Mode. Your tablet will restart. Once it does, select the bottom option to install from SD card. Install the RootFromOTA.zip and then reboot. Once rebooted, install the supersu app or another root application of your choice.
Credits: As above to RawX
Congrats... You're rooted.

Mods
Currently, I've managed to get great battery life out of my tablet by installing kernel tuner and changing the settings as such:
Governor: Ondemand (default is fantasys)
Max: 1200 MHz (Default is 1200 MHz)
Min: 240 MHz (Default is 120 MHz, but I had trouble with usability at this setting and Ondemand)
I also recommend setting wifi to turn off when the screen is off and turn off autosync.
This seemed to give me a very useable system but with greatly improved battery life. Doing the above and a few other tweaks here and there have made my battery life so that it drains by about 1% overnight when not in use. I also seem to get better battery life while using the tablet. I haven't had any trouble playing games either.

neatojones said:
Option #2, Flash firmware for an alternate device that can be rooted easily. Warning!!! Currently, there is no way to get back to stock (until someone who gets root with another method makes a copy of the firmware)
Go to this website: http://www.iviewus.com/firmware788TPC/ and download the firmware. Yes, it is for another tablet. However, the tablet appears to have the same specs as ours. Once downloaded. Install the included PhoenixSuit software. Once it is running, click the button at the bottom right to update the software to the newest version (this may not be required). Then, plug in your tablet using the usb port and install the drivers. I used google and found them all within minutes. Once the software recognizes your tablet go to the firmware tab where you have extracted the .img file and select the file. Next, click upgrade to upgrade your tablet (it has instructions to help your tablet be recognized if you are having difficulty). Once the new firmware has been flashed, then download the file RootFromOTA.zip that can be found on various places such as XDA. Move the file onto an external SD card. Then, go to settings -> backup & reset -> Recovery Mode. Your tablet will restart. Once it does, select the bottom option to install from SD card. Install the RootFromOTA.zip and then reboot. Once rebooted, install the supersu app or another root application of your choice.
Congrats... You're rooted.
Click to expand...
Click to collapse
I am assuming the camera is not working using this method or did you figure it out?
And also, do you have a link to the drivers you used off hand or what did you search for to find them?

Hippie459MN said:
I am assuming the camera is not working using this method or did you figure it out?
And also, do you have a link to the drivers you used off hand or what did you search for to find them?
Click to expand...
Click to collapse
Nope, still haven't gotten the camera working. We are missing some config files still. Do you need the camera drivers or the tablet drivers?
The camera drivers are : sp2518 and sp0838, though I also see a module being loaded called cam_detect
I don't recall where I got the adb usb drivers for the tablet, but it would probably be a good thing to mention in this thread so if you have them, let me know and I can add it to one of the top posts. If you're having trouble finding them, I'll remove my drivers and go back through the process to find them again.

Looking for the tablet drivers. I am about ready to tap out on this thing for a while. lol Its driving me crazy.

Hippie459MN said:
Looking for the tablet drivers. I am about ready to tap out on this thing for a while. lol Its driving me crazy.
Click to expand...
Click to collapse
OK. The drivers I used were probably: VID_1f3a_PID_efe8 (or something similar)
You can either google that or try downloading the firmware for TP718AQ here: http://www.agptek.com/forum/viewtopic.php?f=22&t=948
Remove all prior drivers for the tablet. Plug it in and tell Windows to use the drivers from the extracted file you download (Will extract to TP718AQ_Update_Firmware\USB Driver).
Sometimes I have to do a little dance with restarting the device and my computer to get it to recognize it.
As a last resort you could try this: http://www.xda-developers.com/andro...r-solves-your-adb-driver-problems-on-windows/
Let me know if you have any problems.
Good Luck!

Ok, I officially give up trying to root this thing. Stupid windows will not install the drivers in both the links you provided and I cant get windows to even try to install anything after removing them then I got the android ADB drivers to install but still zero luck. All rooting apps fail. Hopefully someone will post the image of their rooted NB07. A few claim to have rooted it just fine but I cant win with this thing.
All I want is to be able to run link2sd and a few other apps that require root. This is officially the longest I have owned an un-rooted android device. lol

I'm the one that got the root working using kingo, so for the drivers the easiest method is just using Top Notch Tablets How to install ADB drivers ( I would post a link but I don't have 10 posts yet on XDA)
That worked on the first one, the second one it didn't not entirely sure why, but you can send a email to support and ask them for development drivers for the nobis tablets and they will send the ADB drivers you need. After you have the drivers installed use kingo while the tablet is in usb debug mode BEFORE plugging it into your usb port and do not turn on usb transfer. the first time after it reboots kingo will report that it was not rooted, leave it plugged in and power off and back on and it should report the root worked. This method gives you SuperSU. Both times I've done this were for clients of mine but its pretty straight forward.

Well, I have decided that for now this tablet of mine is un-rootable. I must have tried with 5 or 6 different drivers about 20 times with each with Kingo. I even tried that other program that is all in Chinese that loads some BS app on to your phone with no luck. So, for now, I am going to give up but if anyone has any other ideas or wants me to try something or they have for sure figured out how to root it, let me know as I am happy to help the best I can.
Edit: Oh yeah, Dont know how much this will help anyone but here is some more specific specs on the Nobis NB07 tablet I pulled off it with Hardware Info 3.0.0. Feel free to put the link in the first or second post if you want. Maybe it will help a little bit more.
http://www.hippie459mn.com/nobis_nb07/index.html
:good:

Hippie459MN said:
Well, I have decided that for now this tablet of mine is un-rootable. I must have tried with 5 or 6 different drivers about 20 times with each with Kingo. I even tried that other program that is all in Chinese that loads some BS app on to your phone with no luck. So, for now, I am going to give up but if anyone has any other ideas or wants me to try something or they have for sure figured out how to root it, let me know as I am happy to help the best I can.
Edit: Oh yeah, Dont know how much this will help anyone but here is some more specific specs on the Nobis NB07 tablet I pulled off it with Hardware Info 3.0.0. Feel free to put the link in the first or second post if you want. Maybe it will help a little bit more.
http://www.hippie459mn.com/nobis_nb07/index.html
:good:
Click to expand...
Click to collapse
Thanks to the work of someone on another forum, I have now got TWRP working on our device and am hoping we will soon have a CM working on it as well. Check back in the near future for further details. Maybe if you can't have a rooted stock, we can get a fully functional CM.

I am assuming you need to have root to flash the TWRP recovery correct. This is good news. Would love to have more info on it. Are you working with people on this site or another site? I would love to follow along.

Hippie459MN said:
I am assuming you need to have root to flash the TWRP recovery correct. This is good news. Would love to have more info on it. Are you working with people on this site or another site? I would love to follow along.
Click to expand...
Click to collapse
On another site for now. Just PM's at the moment so not much to follow yet. But, all you'll need is the Phoenixsuit to install it, so you won't have to root your tab first. You'll have root on the new ROM. You'll have to have drivers fully working though. Once fully working I'll link to the site so people can get the files and hopefully we can get this guy some donations for his work.

Awesome! I would go right to CM on this and skip the whole rooting the stock firmware. Would be nice to be able to root the stock firmware though then things would be so much easier. Think the camera will be working on the CM build? If not no big deal but would be nice to have them working.
Keep me (us) posted on the progress.

Hippie459MN said:
Awesome! I would go right to CM on this and skip the whole rooting the stock firmware. Would be nice to be able to root the stock firmware though then things would be so much easier. Think the camera will be working on the CM build? If not no big deal but would be nice to have them working.
Keep me (us) posted on the progress.
Click to expand...
Click to collapse
Not sure about the camera yet. I have CM booting but no touch yet, so this will be the first task. I'll keep everyone posted.

Any word on getting things to work yet?

Currently, we have CM working with no touch screen/camera. I'm not sure what else all isn't working because I'm waiting on my OTG cable to come in for further testing to see what all is going to be required to get the touchscreen going. Right now, it appears we my be looking at compiling our own drivers which could take some time to do. I think we'll get it eventually, but it may take some time. If you don't need touchscreen or camera, it could be working right now.

Sorry for no updates for a while. My work has been delayed on this since I have a son who is sick and in the pediatric ICU. I'll get back to work when things calm down for me.

No worries man. Family first.

Just a question, Hippie...
On the original ROM, can you see your device in ADB? If you can, and type "adb shell" do you get root? If you have adb access but not root, can you try typing sh and see what happens?
Also, could you try loading the rootfromOTA.zip and see if you can get a printout of the error log if possible?
Also, I tried installing this from the recovery on a similar ROM and it acted like it failed. I went back into the ROM and used adb and was able to get root using vroot or kingo...I don't remember which. This may be worth a shot.
Interestingly, I have been looking for alternative ways to root and found this (but we need to find a way to get to the bootloader):http://whiteboard.ping.se/Android/Rooting
I think that the method to get to bootloader is to turn off the tablet, then hold down the back button while tapping the power button 5 times. But, I also googled and found a method for getting to fastboot from adb in android without root as well which may work.