[Q] Galaxy Tab - Phone.apk error - General Questions and Answers

Hello everyone!
As you can see I am a noobie and I hope I am doing the right thing to start a new thread. I searched the previous posts but couldn't find any related topic.
I have a Samsung Galaxy Tab 7", GT-P1000XXJPZ, Gingerbread 2.3.3, Kernel 2.6.35.7 [email protected] #2, Build GINGERBREAD.XX1Q1, rooted with Odin, installed CWM, Superuser and Terminal Emulator. I have then deleted many system apps but NOT the phone.apk nor any phone related system apps.
Everything worked perfectly but then suddenly one morning the GTab started showing a popup notice after ending every phone call reporting an error in com.android.phone process and the only option is to Force Close it.
After this the app restarts and I'm able to make and take phone calls, but the bluetooth earpiece does not connect anymore until I reboot the Tab.
Everything else works perfectly and the Tab is now flying with 259MB of free memory.
I even tried wiping everything and restore factory settings but no luck...
So, the questions are:
1. Is the phone.apk corrupted somehow or is there another explanation?
2. Can I replace it with a new one (if so, how is it done and where can I find a new phone.apk app?)
3. Am a a real idiot for screwing up my phone for good?
Any help with this will be greatly appreciated...
Many thanks in advance.

1. Probably deleted something that the phone.apk needed
2. As the phone apk is not missing replacing it won't help, you would need to restore the file you should not have deleted (first you would need to know which one though)
3. Not at all, maybe a bit overzealous. A factory reset won't restore deleted system apps, it just sets everything to default. Where would i take the deleted apps from anyways?
You could restore deleted system apps by extracting them from a ROM, or just flash a new ROM with ODIN or CWM.

Hi Dark3n,
Thank you for your really quick reply.
Could you advise where I can find a ROM suitable for my GTab?
Secondly, what would be the right procedure to flash this ROM?
Would it be from the CWM Recovery boot?
Thank you for your help, really appreciate it!
G
Sent from my GT-P1000 using XDA App

Hm just google for your current version i suppose "GT-P1000XXJPZ", "XXJPZ" is the version, GT-P1000 your device.
What procedure you use depends on the file type of the rom you found.

Thanks!
I have found a ROM which seems to be the one for my GTab.
It came as a tar file.
File name is P1000XXJQ1_P1000XXJQ1_P1000JPZ_HOME.tar
I tried Flashing it through CWM amp but the device simply reboots and nothing happens. Is there a particular procedure to follow?
Sorry to bother you so much but it seems you've got a lot more knowledge about this...
And thank you for your patience too!
Sent from my GT-P1000 using XDA App

CWM doesn't flash TAR files.
It is most likely to be used with ODIN or HEIMDALL software.
There most likely was a description on the procedure, where you got the file from.

Thanks so much!!
Will give it a try and report back...
Sent from my GT-P1000 using XDA App

Hey Dark3n,
It worked!! Thanks so much for helping me on this one!
I flashed it with Odin and it was OK in a few minutes.
So glad to have my GTab back on track!!
I really owe you one.
Thanks so much.
Guido
Sent from my GT-P1000 using XDA App

I'm happy to hear that.
Enjoy your stay on XDA.
Try to keep up your posting style, it will do you alot of good .
*looks at the other threads in Q&A*...
Bad or no thread titles, not even one sentence of description or gruesome english making one doubt his ability to read...
PPL if you read this, the best way to get good and fast answers, is to make a GOOD THREAD! Why should someone bother to invest time to answer, if the thread starter didn't invest any time

Related

[Q] Samsung Galaxy S 4G Gingerbread 2.3.6 Update and Root

Samsung Galaxy S 4G Gingerbread 2.3.6 Update and Root
So i found this over at http://thepiratebay.org/torrent/6794946
if anyone has tried this let me know what happens and what you think. I bought this phone used a few weeks ago. I had no idea about rooting and unlocking and roms, I basically learned everyrthing thru research here....so naturally im a tad skeptical of things outside of this forum....silly
Ive rooted and unloked my phone. ive flashed several roms. right now i have the octane v2.3.5...smooth resposive fast
Not sure it's much if any different from what you can get out of the forums here. I'm running rooted 2.3.6.
I'm a 'better to be safe than sorry' type. Looks like that links makes a coupke of references back to here, anyway.
Sent from my SGH-T959V using XDA App
Don't use anything that isn't on this forum or in RootzWiki. You'll just get flamed for hard bricking by using something from another site.
Rooting and deleting bloat
I got this T959V last week and knew there had to be development on it. I got a Pandigital novel last christmas and learned some good lessons about android over at slatredroid. I was happy to find so much good work here and jumped right into flashing after slogging through this swamp (that's a compliment!) of info and choices. My phone arrived with Froyo 2.2.1 and stock T959VUVKD1. After getting my mind wrapped around the possibility of bricking the thing (which, thanks to the nature of the device and/or the excellent developers here, seems less likely than with the Pandigital) I used Odin to flash right to FW2.3.5, then tonight to FW2.3.6, T959VUVKJ5, kernel 2.6.35.7-T959VUVKF1-CL270364
I have not removed my sdcard (unlike w/pandigital flashing) or sim card on either of the three stops in my upgrading. HOWEVER, when I followed dsexton702's guide to rooting I did have to remove my battery - the red blowfish after loading his first rooting tarball nearly had me dropping a load in my pants. Couldn't power down with the button, so I pulled the battery and hoped. Put the battery back in, powered on and it booted. I thought factory reset, then reflashing 2.3.6 and forgetting about rooting. But I do want to remove some of the bloat from the device, so I just used odin to upload the second rooting tar and prayed! It worked! Thank you, dsxton702!
At least it seems to have worked. When I open titanium it now recognizes the device as rooted. I am using the freebie, which may be my real problem. But, anyway, here's where I am. When I try to delete preinstalled software like slacke by doing FORCE REMOVE APP in titanium I get this result:
finding update package
unknown volume for path [SYSTEM:/app/slackerradio.apk]
Can't mount SYSTEM:/app/slackerradio.apk
Installation aborted
Given these choices, I tried #4 first, then #1:
reboot system
apply update from sdcard
wipe data/factory reset
wipe cache partition
The app remains. I know I have to buy the app to freeze other apps; the error message tells me so. But to delete, is my problem that I am using the titanium freebie, or am I doing something wrong with the freebie?
So has anyone tried it? I just want to make sure someone has confirmation before I try this one.
neon_skunk said:
So has anyone tried it? I just want to make sure someone has confirmation before I try this one.
Click to expand...
Click to collapse
Neon - Use the GB Ext4 Starter Pack - It works.
Or use The KJ6 Heimdall One-Click Collection - It works.
Or use ROM-ODIN-2.3.6-Gingerbread Offical - It works.
If there were torrents for downloads things would be much easier:laugh:
Help me with Valhalla Custom ROM flashing
Hello. I just thought this forum to be the appropriate one for posting my issue. I have SGS4G. Using XDA forums help I have been able to upgrade from 2.3.3 to 2.3.6. lumin30's "[GUIDES] Fresh out of box Galaxy S 4G | Heimdall One-Click For Dummies" I have flashed my Kernel and installed CWM. Thanks a lot lumin30 for your guide. It really helped a noob like me.
However I am facing below problems
1. From the same link http://forum.xda-developers.com/showthread.php?t=1470716 I chose Valhalla Black FB edition. And when i choose "vb-fb-build-4.zip" download link it downloads very slowly and evenif the total file size initially shows as 143MB, however only 20-40MB files are getting downloaded. I have tried several times. Same issue..not sure why. Anyone has any link from where I can get the latest Valhalla Black FB edition?
2. When I tried to take the Valhalla Black FB Edition from "https://github.com/teamacid/valhalla-black (Valhalla Black FB Edition on GitHub) and downloaded it it was around 141MB. The name was "teamacid-valhalla-black-build3-4-ge768021.zip". not sure if this is the FB version or not. Anyway when I try flashing this ROM I am getting "update opening and installation aborted" on top it says "choose the update file from sdcard" or any other location kind of information..
Could anyone help me with these questions. It will really be a great help as I need to flash the ROM. Do I also need to install some more files along with the ROM?
Please help!!
tomzzy said:
Hello. I just thought this forum to be the appropriate one for posting my issue. I have SGS4G. Using XDA forums help I have been able to upgrade from 2.3.3 to 2.3.6. lumin30's "[GUIDES] Fresh out of box Galaxy S 4G | Heimdall One-Click For Dummies" I have flashed my Kernel and installed CWM. Thanks a lot lumin30 for your guide. It really helped a noob like me.
However I am facing below problems
1. From the same link http://forum.xda-developers.com/showthread.php?t=1470716 I chose Valhalla Black FB edition. And when i choose "vb-fb-build-4.zip" download link it downloads very slowly and evenif the total file size initially shows as 143MB, however only 20-40MB files are getting downloaded. I have tried several times. Same issue..not sure why. Anyone has any link from where I can get the latest Valhalla Black FB edition?
2. When I tried to take the Valhalla Black FB Edition from "https://github.com/teamacid/valhalla-black (Valhalla Black FB Edition on GitHub) and downloaded it it was around 141MB. The name was "teamacid-valhalla-black-build3-4-ge768021.zip". not sure if this is the FB version or not. Anyway when I try flashing this ROM I am getting "update opening and installation aborted" on top it says "choose the update file from sdcard" or any other location kind of information..
Could anyone help me with these questions. It will really be a great help as I need to flash the ROM. Do I also need to install some more files along with the ROM?
Click to expand...
Click to collapse
Is there anyone who can help me? I have checked all the forum's and tried all possible options..I am still getting on CWM5
Opening package
Installing package
Installation Aborted.
No other message.
I am on Valhalla Final and trying to flash Valhalla Black FB edition
Please someone help me!!
tomzzy said:
Is there anyone who can help me? I have checked all the forum's and tried all possible options..I am still getting on CWM5
Opening package
Installing package
Installation Aborted.
No other message.
I am on Valhalla Final and trying to flash Valhalla Black FB edition
Please someone help me!!
Click to expand...
Click to collapse
Check rom md5 you might have a bad download
And.try the download link.provided on rom thread OP that's it.
----------------------------------------------
If helped don't be afraid to hit the thanks button it doesn't bite lol
Are you choosing update from zip or install from zip? I haven't looked at cwm in awhile so not exactly sure what it says
Sent from my SGH-T959V using xda premium

[Q] Totally new to this..

I just got my Samsung Infuse 4G, and I'm very interested in learning to flash to improve the performance of my new toy, but I'm kinda intimidated lots to learn and seems like a steep "learning curve. Can someone point me in the right direction on a good place to start (good reading).
I'm most interested in using the Zeus ROM as it seems to not lose any functionality, uses the most current modem, allows for overclocking. Is there anything else I shouldn't flash with this ROM I've. heard things mentioned in other threads like, lag fixes, different kernels, and other various fixes. But like I said I'm a noob and have a ton of questions even about the most basic of topics.
All I've done thus far is installed the free version of ROM manager, used the flash Clockworkmod recovery, and used the backup current ROM (which would be the stock one). I'm a little scared to proceed as after I backed up the current ROM I went looking for the file I named but couldn't find it.
I think what I need most is a good starting point, any help is appreciated.
dginsd said:
I just got my Samsung Infuse 4G, and I'm very interested in learning to flash to improve the performance of my new toy, but I'm kinda intimidated lots to learn and seems like a steep "learning curve. Can someone point me in the right direction on a good place to start (good reading).
I'm most interested in using the Zeus ROM as it seems to not lose any functionality, uses the most current modem, allows for overclocking. Is there anything else I shouldn't flash with this ROM I've. heard things mentioned in other threads like, lag fixes, different kernels, and other various fixes. But like I said I'm a noob and have a ton of questions even about the most basic of topics.
All I've done thus far is installed the free version of ROM manager, used the flash Clockworkmod recovery, and used the backup current ROM (which would be the stock one). I'm a little scared to proceed as after I backed up the current ROM I went looking for the file I named but couldn't find it.
I think what I need most is a good starting point, any help is appreciated.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1437548
edit: welcome and have fun
edit edit: play with for froyo first..discover your phone. read up as much as your can for a week or two..then if you still want to, go ahead.
qkster said:
http://forum.xda-developers.com/showthread.php?t=1437548
edit: welcome and have fun
edit edit: play with for froyo first..discover your phone. read up as much as your can for a week or two..then if you still want to, go ahead.
Click to expand...
Click to collapse
Can't see anything to add.. Maybe check our the Infuse superthread which is stickied in dev section.
And definitely play with froyo. Feel and KNOW Android. Then you will know how your phone works and is supposed to play. You will appreciate the the custom roms all the more.
Sent from my SAMSUNG-SGH-I997 using Tapatalk
I'd recommend Titanium Backup & Dropbox, they've come in pretty handy for me. And pay close attention when instructions say to wipe! I'm pretty new at this too, but I grasped the importance of the wiping after reading through a few threads and seeing what happened to those who forgot/didn't.
Radiotsar said:
I'd recommend Titanium Backup & Dropbox, they've come in pretty handy for me. And pay close attention when instructions say to wipe! I'm pretty new at this too, but I grasped the importance of the wiping after reading through a few threads and seeing what happened to those who forgot/didn't.
Click to expand...
Click to collapse
Now, you're tallking Radio.
It only took Erik three months to figure that out..
check out albee's sig...lol
Thanks! I figure if I keep at this, pretty soon I'll be as "functionally illiterate" in Linux as I am in Assembly, SQL and VB.
Radiotsar said:
I am in Assembly, SQL and VB.
Click to expand...
Click to collapse
Wow, you have all the right credentials to be a kernel dev.
qkster said:
Now, you're tallking Radio.
It only took Erik three months to figure that out..
check out albee's sig...lol
Click to expand...
Click to collapse
Woah what! Lol...
Sent from my SAMSUNG-SGH-I997 using Tapatalk
Yes...+1...know froyo and your phone first, and read, especially if you plan on flashing a beast lime Zeus....
Sent from my SAMSUNG-SGH-I997 using xda premium
dman3285 said:
Yes...+1...know froyo and your phone first, and read, especially if you plan on flashing a beast lime Zeus....
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
I love lime! It is a wee bit sour. Glad to hear you lime them too... Lol.
Sent from my SAMSUNG-SGH-I997 using Tapatalk
Thought I'd missed some new color theme.
Radiotsar said:
Thought I'd missed some new color theme.
Click to expand...
Click to collapse
No, lol. Dman and his swype. SWIFT KEY FTW!
Sent from my SAMSUNG-SGH-I997 using Tapatalk
Grrrrrr....
Sent from my SAMSUNG-SGH-I997 using xda premium
Thanks all for the suggestions, I'll get to reading.
I've had the phone for about a week and a half and thus far I love it (coming from a dumb phone) and loved it even more when I learned Android is a Linux based system, as I switched to Ubuntu about a year ago.
dman3285 said:
Grrrrrr....
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
Try it dude. Worst case scenario you hate it. Promise you will love it.
Sent from my A500 using Tapatalk
Result of my first flash
OK I've done quite a bit of reading over the last 24 hours familiarized myself with how flashing is done. Thus far I've flashed first the Infusion Kernel found here forum.xda-developers.com/showthread.php?t=1134995 using ROM manager with ClockWorkMod Recovery. Got a little worried at first because it took so long to boot afterwards , but thanks to qkster's noob post I kinda expected it, it helped me a lot, so again thank you for that.
I do have some minor problems and some questions. In ROM manager I selected the option to flash ROM from SDcard, it then prompts me to select the ZIP file to flash and after I select it it asks me what to wipe so I select everything, It then reboots into CWM. I then have to select again flash from SDcard and select the file, my question is am I supposed to have to re-select "flash from SDcard" and re-select the ZIP file to flash? When I flashed the Zeus ROM I didn't do any wiping in CWM because I had selected those options in ROM manager, is this a goof up on my part, was I supposed to wipe again once inside CWM? I ask this because it seems like nothing was wiped, all my apps were still there, settings, pretty much everything. I also have an error right after I boot the phone up and my desktop is loaded, I then get a pop up thats really quick maybe 10 seconds
Code:
The application android system (process system) has stopped unexpectedly please try again[CODE] with a force close button. Everything seems to work fine on the phone so I'd like to know what this error is about, is it linked to me not wiping everything once in CWM?
There is also some instructions for the Zeus ROM that I didn't understand regarding the swype keyboard not installing with the flash and I had an error pertaining that as well. The instructions on the Zeus ROM read as follows [QUOTE]This theme includes a themed swype keyboard (Thanks to nunhugger and studacris). After flash of the theme, Do not open swype, go to root explorer and install it, then it will work flawless. For some reason it will not install on flash, but its all good.
[/QUOTE]
This instruction is listed for the Aries theme (which I tried first) not the ICS revamped, but I'm having the same issue. How do I install Swipe via root explorer. I also really liked the Samsung keyboard any way to get that back? I did use titanium backup for a lot of my apps (haven't restored anything yet, as everything seems to still be there) but I'm not sure I did for the Samsung keyboard. Anyone have an .APK of it they can get to me?
Any help with my issues is greatly appreciated, keep in mind though I'm still a noob so instructions given that a 10 year old can follow are preferred.:p My wife likes the look of my phone now and wants me to do hers too, so I want to make sure I do it right, it's one thing to brick your own phone, quite another to brick your wife's.
dginsd said:
OK I've done quite a bit of reading over the last 24 hours familiarized myself with how flashing is done. Thus far I've flashed first the Infusion Kernel found here forum.xda-developers.com/showthread.php?t=1134995 using ROM manager with ClockWorkMod Recovery. Got a little worried at first because it took so long to boot afterwards , but thanks to qkster's noob post I kinda expected it, it helped me a lot, so again thank you for that.
I do have some minor problems and some questions. In ROM manager I selected the option to flash ROM from SDcard, it then prompts me to select the ZIP file to flash and after I select it it asks me what to wipe so I select everything, It then reboots into CWM. I then have to select again flash from SDcard and select the file, my question is am I supposed to have to re-select "flash from SDcard" and re-select the ZIP file to flash? When I flashed the Zeus ROM I didn't do any wiping in CWM because I had selected those options in ROM manager, is this a goof up on my part, was I supposed to wipe again once inside CWM? I ask this because it seems like nothing was wiped, all my apps were still there, settings, pretty much everything. I also have an error right after I boot the phone up and my desktop is loaded, I then get a pop up thats really quick maybe 10 seconds
Code:
The application android system (process system) has stopped unexpectedly please try again[CODE] with a force close button. Everything seems to work fine on the phone so I'd like to know what this error is about, is it linked to me not wiping everything once in CWM?
There is also some instructions for the Zeus ROM that I didn't understand regarding the swype keyboard not installing with the flash and I had an error pertaining that as well. The instructions on the Zeus ROM read as follows
This instruction is listed for the Aries theme (which I tried first) not the ICS revamped, but I'm having the same issue. How do I install Swipe via root explorer. I also really liked the Samsung keyboard any way to get that back? I did use titanium backup for a lot of my apps (haven't restored anything yet, as everything seems to still be there) but I'm not sure I did for the Samsung keyboard. Anyone have an .APK of it they can get to me?
Any help with my issues is greatly appreciated, keep in mind though I'm still a noob so instructions given that a 10 year old can follow are preferred.:p My wife likes the look of my phone now and wants me to do hers too, so I want to make sure I do it right, it's one thing to brick your own phone, quite another to brick your wife's.[/QUOTE]
If you are running zeus without problem, you must have done something right. The force close when booting up its normal. It will go away when you leave it alone 5 minutes.
You had mentioned that you used ROM Manager, try to avoid that program to flash. Wipe may be ok, idk. I don't use it. I usually wipe or flash in cwm.
In gtg post in the QA, the is a pin up on his original infused ROM thread. Use the cwm installation instruction.
The kernels are in that link.
In order to install something via Root Explorer, you should have that program. You can buy it from Market ....or look for it. When you run it, go to /system/app find the zombie Swype, and install it by click on it. You don't necessarily have to use root explorer, ES Explorer from Market will work as well. Root explorer is a better tool for modding.
Here is another Swype.
forum.xda-developers.com/showthread.php?t=1351512
Click to expand...
Click to collapse

Questions answered about the p3113

Alright, I have been answering threads for simple stuff about rooting, and modding the p3113, and its cousins. If you have questions about how to do anything, please post them here, and I, and others will help you. This way we can keep a running q/a thread without flooding the forum with the same question. I am in the process of writing new how to's so hopefully we have the answers to your questions in a easy to find thread. Happy new year.
Edit: I take no credit for any of the code in these posts, than the people who did. They are the people who have given the most, without them, I would be worthless.
Sent from my Rezound using Tapatalk 2
Broken link
JeramyEggs said:
Alright, I have been answering threads for simple stuff about rooting, and modding the p3113, and its cousins. If you have questions about how to do anything, please post them here, and I, and others will help you. This way we can keep a running q/a thread without flooding the forum with the same question. I am in the process of writing new how to's so hopefully we have the answers to your questions in a easy to find thread. Happy new year.
Sent from my Rezound using Tapatalk 2
Click to expand...
Click to collapse
Is there an alternative place to find espressowifi-recovery-5-18.tar.md5 other than from goo.im...
Or what could I use for an alternative,
Thanks
RESOLVED: The ODIN flash did work after I used the right tar file.
I buried this in another Q&A thread and have no replies so far. Maybe you could give me some advice.
I tried flashing one of those firmwares for 4.1.1 which was only 357 MB and it got stuck at the boot screen, It seems I had bad instructions I followed with a link to an incomplete flash file, perhaps part 1 of a 2 part download. When it flashed it last said it was updating remaining files and then went back to the recovery, When I rebooted it stuck at the recovery even after a data wipe. I tried flashing a 3113 rooted stock rom and it gives me an E:signature verification failed. I used odin to flash the 4.04 stock rom which passes, but it still freezes at the boot screen even after a data wipe. Should I try flashing CWM recovery through odin to get around the signature verification or does someone know another procedure that has worked to get back to stock 4.04 from this condition. I have seen this mentioned a couple of times in the development threads with users indicating that they got back to stock, but without details of exactly how.
The firmware I apparently partially flashed was GT-P3113_P3113UECLI4-OTA-P3113UEBLH2_XAR_374372839
Also I was not able to see if usb debugging was enabled since I could not do anything but recovery or download modes on the tablet.
Hey megafatporky, sorry I am late, check here.
http://forum.xda-developers.com/showthread.php?p=36068963
[Recovery][GT-P3113] Unofficial CWM 6.0.2.7 Normal & Touch
Sent from my Rezound using Tapatalk 2
How to a boot into recovery on this tablet I forgot...
Sent from my SCH-I535 using xda app-developers app
Okay....
How do I get back to stock and have no root access at all. I dont mean just flash a deodexed ROM and say thats it. I want to completely recover my device (P-3110 , same as P-113 just no IR blaster) to the original settings as supplied by Samsung.I need it to be fully updateable via kies and accept OTA updates.
Thanks
Escofosho said:
How to a boot into recovery on this tablet I forgot...
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Power button and the Volume button directly next to the Power button will bring you into "Recovery mode".
Power button and the Volume button furthest away will bring you into "Download mode".
To boot into "Safe mode" When the tablet is on press the power button till the reboot menu appears then press and hold the Reboot button , until you get the option to boot into safe mode. Reboot and you are good to go.
Thought I'd try this rather than a new thread.
Hi Jeramy, hopefully you have some advice.
My problem: I want to be able to install some apps on the SD card, and still use the stock 4.1.2 that I upgraded to using Kies.
What I've discovered so far:
Samsung doesn't like moving apps to SD (Link2SD for example which makes a soft link in the normal Samsung place to the SD card)
First must jailbreak
Jailbreaking uses "odin" (something to put Roms on) and a ROM
So far I've got Link2SD, and downloaded some ROMs, but there doesn't seem to be a good ROM that is basically just the stock + superuser. I do see some for France etc.
One thought I had is will this work:
http://forum.xda-developers.com/showthread.php?t=1887757
Wherein they install some Zip somehow. What's the CWM do? Is it version dependent?
Anyhow, thanks I hope this makes some sense.
JeramyEggs said:
Alright, I have been answering threads for simple stuff about rooting, and modding the p3113, and its cousins. If you have questions about how to do anything, please post them here, and I, and others will help you. This way we can keep a running q/a thread without flooding the forum with the same question. I am in the process of writing new how to's so hopefully we have the answers to your questions in a easy to find thread. Happy new year.
Sent from my Rezound using Tapatalk 2
Click to expand...
Click to collapse
Moving apps to SD went out with ICS 4.0.4 Goggle dropped it from Android as not needed, not useful anymore.
@Sean Seany
Thanks Sean for picking up the question. I have been shirking my duties here, and I apologize. Are you serious about your question, or are you pulling my leg. I know you have been around here much longer than I have, and have answered one of my questions already. If you are serious though, cant you just Odin back to stock with official firmware, and take the ota? This is my first Samsung so I am learning as I go. Though rooting Samsung's is so much easier than my Rezound. We have to short the board with a paperclip to achieve s off on it.
Edit, I used this to install the official from UK.(p3110) on my p3113. Complete stock. I would imagine you would do the same, just use all 3110 files.:thumbup:
http://forum.xda-developers.com/showthread.php?t=2007876
[HOWTO][P3113] Revert to Stock Android 4.0.4 ICS build UEBLH2
P.S. I love having friends all over the world, love the alternate views of people from other nations. Mind friending me on here, even though you are leaving these threads? Big bonus of the xda world community.
@ QFX
First, sorry. I havent checked this thread today, and whenever i need something answered, i want it yesterday. It sounds to me like you haven't been in the android world too long. If you have, I mean no disrespect. So far, I have ran a few custom ROMs, but the stock experience is really smooth in my opinion. My best advice is to try a couple, and see what you like.Now to answer your questions. Clockworkmod is a custom recovery that allows you to backup your tablet in the state it is in when you make the back up. It also allows you to flash custom ROMs Like the ones you downloaded. It is a must have if you plan on rooting(jail breaking). Yes they are version specific.There are guides that will walk you through this, and it is pretty simple. If you look in the threads for cf auto root, the thread will walk you through it. After you do this, you will need to flash Clockworkmod. It is in the same threads. Look under development. Both of these files have to be flashed through odin on your computer. As soon as you flash Clockworkmod, reboot into recovery, and make a backup. This way, you can flash other ROMs, and if you want to go back, just restore your backup in Clockworkmod. I am crashing in a few, but will send you links to the files that you need tomorrow. Remember to read the guides a couple of times to make sure you understand everything before you try. After I send you the links, if you need additional help, pm me, and I will walk you through it. Good luck, and have fun
Add on
Apps2sd no longer works, but there is a script that allows you to switch your Mount points for external, and internal storage. I have a class 10 32 gig SD card that now works as my internal storage. The only thing is that you have to manually switch the files between the two at the start so the os can find what it is looking for. I will send you a link for that too.
Edit: here is the storage swap thread
http://forum.xda-developers.com/showthread.php?t=1961097
p-3113 Swap ExternalSDCard 2 Internal
Voice sound driving me nuts
I just updated Tab 2 7.0 P3113 to stock jellybean (not rooted), and now every time I swipe to a different screen it tells me which screen I am on. How can I turn this off?
I believe if you add something like a shortcut, then remove it, the message will go away. Let's try something easy like this first.
Sent from my Rezound using Tapatalk 2
I just got this thing for christmas and I really want to root it so as I can use my ps3 controller to play games , unfortunately I'm a noob and have absolutely no idea where to start or how to do it. Any assistance would be greatly appreciated.
Sent from my GT-P3113 using xda app-developers app
Hey stark. Here is a Odin flashable zip that will give you root, Clockworkmod, and has Odin in it as well. Download it, unzip it on your PC, and place the cf root file somewhere easily accessible. Install Odin, then follow the guide. Pm me if you need any more help.
http://forum.xda-developers.com/showthread.php?t=1957160
[2012.12.04][GT-P31xx] CF-Auto-Root
Sent from my Rezound using Tapatalk 2
Moving apps to external SD
DigitalMD said:
Moving apps to SD went out with ICS 4.0.4 Goggle dropped it from Android as not needed, not useful anymore.
Click to expand...
Click to collapse
I don't think that Google did this. My friend has a Galaxy II running 4.2.1 (custom ROM CM10) and can move apps to the external SD card.
I've tried rooting the my tab and installing the latest stable CM10 ROM but I still don't get the option.
JeramyEggs said:
Edit: here is the storage swap thread
http://forum.xda-developers.com/showthread.php?t=1961097
p-3113 Swap ExternalSDCard 2 Internal
Click to expand...
Click to collapse
Unfortunately I can't get this to work on cm 10.1....does anyone have a way to swap it on cm 10.1?
I don't think it will work on aosp. It has to do with the mount points .
Sent from my ADR6425LVW using Tapatalk 2
P3113 on 4.1.1
JeramyEggs said:
Alright, I have been answering threads for simple stuff about rooting, and modding the p3113, and its cousins. If you have questions about how to do anything, please post them here, and I, and others will help you. This way we can keep a running q/a thread without flooding the forum with the same question. I am in the process of writing new how to's so hopefully we have the answers to your questions in a easy to find thread. Happy new year.
Edit: I take no credit for any of the code in these posts, than the people who did. They are the people who have given the most, without them, I would be worthless.
Sent from my Rezound using Tapatalk 2
Click to expand...
Click to collapse
I'm trying to root a galaxy tab 2 7.0 p3113 on 4.1.1. What I'm wondering is, can I use the same stuff as the 4.0.4 that I found in the instructions here http://forum.xda-developers.com/showthread.php?t=1788625 or are there specific files for 4.1.1?
JeramyEggs said:
Alright, I have been answering threads for simple stuff about rooting, and modding the p3113, and its cousins. If you have questions about how to do anything, please post them here, and I, and others will help you. This way we can keep a running q/a thread without flooding the forum with the same question. I am in the process of writing new how to's so hopefully we have the answers to your questions in a easy to find thread. Happy new year.
Edit: I take no credit for any of the code in these posts, than the people who did. They are the people who have given the most, without them, I would be worthless.
Click to expand...
Click to collapse
Hi Jeremy,
I just rooted my 3113 and I've lost my external sd card when looking in my files. It is however showing that my internal storage is 29.7G. Obviously I've gone and loused the thing up somehow.. After exhaustively searching the fourms, installing "ntfs mounter" and "ntfssd," trying to mount from CW, and trying different cards - I'm more than a little fustrated. I just realized that the movies that I had on the internal memory are not showing either. Any help for a "12:00 Flasher: would be appreciated
I've got CW and I used "gtab2_jellybean_rooter"
@ caniknow it sounds like you flashed the partition swap that swaps the external, and internal memory. Try powering off, and removing ad card, then reboot. See if it can't see internal at all. That will give me some idea of what is going on. I highly recommend cf auto root for jellybean. Super simple, and works without issues.
@ rains try cf autoroot.
Sent from my ADR6425LVW using Tapatalk 2
JeramyEggs said:
@ caniknow it sounds like you flashed the partition swap that swaps the external, and internal memory. Try powering off, and removing ad card, then reboot. See if it can't see internal at all. That will give me some idea of what is going on. I highly recommend cf auto root for jellybean. Super simple, and works without issues.
Click to expand...
Click to collapse
Ok, I did as you suggested
After rebooting without the card: Memory shows 4.49GB
Movies stored on internal have returned
My Files show correct list again
YAY!!! It's not broken!
Ok, now with the 32G card (formatted NTFS - forgot to mention that) reinstalled, the memory has reverted to 29.7GB and showing everything (yes, everything from internal memory; though it is showing that there are memory using applications, file and such, though different amounts) has disappeared once more. GRRR
Tried NtfsSd to mount card: nodda. Tried Ntfs Mounter again: nodda Tried powering down and loading CW, inserting the card and mounting there: nodda Tried touching my left ear whilst standing on one foot in 10" of snow and holding the power button, then swiping left, left, down, uppercut, triangle, square.... once again, nothing.
Back to without the card and rebooting. Everything normal. ?????? I'm now at a total loss.
All I want is to seemlessly transfer my +12GB movies from my media storage to the tab and watch them in the car using the bluetooth interface for the sound. I need the NTFS to do this without chopping the movie into little bits that ruins the sound - and so began this quest which is turning out to be epic. Please help me slay the monster that is my lack of programming knowledge.

[Q] lg g2x install JB.. now frozen on boot

hey everyone!
yesterday, I got really tired of froyo so I said ''f$%? it, lets try to root my phone and install jelly bean, that look really slick!''
. well looks like everyone as to start somwhere..
so my problem right now, I am stuck at the custom LG logo, I cant hard reset and even my recovery boot but the menu wont pop up and simply restart my phone..
basicaly, I feel screwed right now does anybody can help me on this?
it is probably something super stupid and simple but I can'T find any solution so I decided to join this forum for a bit of support..
EDIT: my mistake, it went in the wrong section
thx a bunch!
Usually run this when I cluster f my phone
http://forum.xda-developers.com/showthread.php?t=1590523
thanks for the cue, I will also try this. and keep you posted if it worked or not..
better way to learn is to make mistakes!
http://forum.xda-developers.com/showthread.php?t=1180331
ok, most of the link to download the needed files are dead... I might have to rely on your support guys.
the http://forum.xda-developers.com/showthread.php?t=1180331 thread didnt helped enough..
Did you install the adampk rom?
Sent from my LG-P999 using xda app-developers app
no I haven't...
so far , what I did is
root the pone with the one clicker (wich was a success)
did the recovery with the clockworkmod recovery thing,
restarted and exectued this website's tutorial to jellybean (start with WWW stuff.androidauthority.com/g2x-p999-t-mobile-cyanogenmod-10-cm10-unofficial-115536)
and then, look like it failed..
this morning, I managed to get back to the recovery boot screen and found that if I press the house icon it show up a menu.. but this menu giving me access to reboot, wipe cache, data or install update.zip (which was supposed to fix my problem) but this menu is blued out and unaccessible..
dunno if it helped..
right now, I am trying to get acces to my phone doing the no battery boot thing but my pc doesnt seem to recognize my phone + I am at work hehe so I am pretty much limited in acces due tu the it protection and firewall stuff
I am gonna try to redo that stuff tonight at home but meanwhile, if any of what I described may give you a clue on how to help me, I really appreciate the effort!
thanks again for the support guys, I know it can be a pain sometimes to help people screwing some beginner stuff like I probably do right now
dubmah said:
WWW stuff.androidauthority.com/g2x-p999-t-mobile-cyanogenmod-10-cm10-unofficial-115536)
and then, look like it failed
Click to expand...
Click to collapse
I say you needed to use the g2x android development forums on this site to find a suitable jb rom, not this other site. The one click method isn't very stable, so nvflash is most definitely what you need to try to get working. There are very thorough tutorials on how to get that to work. Do you know which clockwork recovery version you have installed? Should be 5.0.2.0. Once you get home, I suggest you read read read. Do as much research you can to make sure you can follow nvflash instructions to the letter. I know I personally spent about a week researching to make sure I had a solid understanding of the procedure.
I recommend getting nvflash going to get clockwork properly installed, then download a rom from xda, nowhere else. I would even say use a gb rom before trying a jb ...the jb roms are hackfest versions, so they have (from my experience) much poorer battery life, and lack hardware acceleration. Netflix and many 3d games won't work. You can use adampk or mazout's roms but they don't have working radio, i.e. no phone/SMS functionality.
Sent from my LG-P999 using xda app-developers app
dubmah said:
no I haven't...
so far , what I did is
root the pone with the one clicker (wich was a success)
did the recovery with the clockworkmod recovery thing,
restarted and exectued this website's tutorial to jellybean (start with WWW stuff.androidauthority.com/g2x-p999-t-mobile-cyanogenmod-10-cm10-unofficial-115536)
and then, look like it failed..
this morning, I managed to get back to the recovery boot screen and found that if I press the house icon it show up a menu.. but this menu giving me access to reboot, wipe cache, data or install update.zip (which was supposed to fix my problem) but this menu is blued out and unaccessible..
dunno if it helped..
right now, I am trying to get acces to my phone doing the no battery boot thing but my pc doesnt seem to recognize my phone + I am at work hehe so I am pretty much limited in acces due tu the it protection and firewall stuff
I am gonna try to redo that stuff tonight at home but meanwhile, if any of what I described may give you a clue on how to help me, I really appreciate the effort!
thanks again for the support guys, I know it can be a pain sometimes to help people screwing some beginner stuff like I probably do right now
Click to expand...
Click to collapse
Boot into recovery, there should be an option to format or wipe system. Do that then flash the ROM. It won't boot if you flash it over stock.
Also, use the paranoid android rom found in the development section, same cyanogenmod base but works better.
Sent from my Nexus 7 using Tapatalk HD
great ! thx for the advices ! yeah I Will read some more first, making sure I do thing properly, for now, I will try to revert at least to my backup and wait til I know what I'm doing!
thx again, I keep you up about the progress !
progress!! .. I tried to start my phone without the battery.. my pc recognized the phone for about 10sec and then the icon disapeared and until then, nothing I plug I start there is no way I can make my pc to recognize the phone...
does this happened to anyone before?
allright! I have bean reading about the NVFlash! that help A LOT! actually it almost fixed my thing! the phone is now unbriked YAY
I just keep replying to myself incase there is another guy who dont know crap about the obvious, if it can help the thread worth it
I used this tutorial to fix things,
http://forum.xda-developers.com/showthread.php?t=1248644&highlight=nvflash+steps
My main issue was the APX driver wich wasnt installed.. now I know bit more, I still have issue but luckily things goes forward so it gave me the boost to keep working on
but I face a new problem so maybe some of you might be able to help on that new issue
I am from montreal and here in quebec we have videotron instead of t-mobile and since I used a t-mobile boot it looks like my sim card is not recognized anymore..
is there a way to fix that? am I supposed to find a videotron thing?
hope it helps
dubmah said:
I used a t-mobile boot it looks like my sim card is not recognized anymore..
is there a way to fix that? am I supposed to find a videotron thing?
Click to expand...
Click to collapse
What do you mean by "T-Mobile boot" and "videotron thing?"
Sent from my LG-P999
---------- Post added at 10:09 PM ---------- Previous post was at 10:02 PM ----------
Ok, wait I think I understand what you're saying now. If you can, pm the op of that thread you used to unbrick. Ask that person if you need some kind of different file in that .zip file to work on your carrier.
I remember having to use that guide to get back to stock. Glad to see you're making progress. I know it can be frustrating when devices get wacky. Good luck!
Sent from my LG-P999
hehehe sorry, I am not fully used to the right terms so I rather stay in the gray zone by using words like ''thing''
but I can now oficially say I was talking about ROMs
finally, I managed to bring back my phone to the stock mode everything seem to work!
now I can brick it again!
thx for the help!
I began to wonder if it was just a matter of changing APN settings?
Sent from my LG-P999
this, or... putting the simcard in the properly? !!

[Q] LG Motion (Possible Cyanogen mod?)

Hey everyone! I would like to start off by saying that I am brand new here, and am surely going to mess up quiet alot... But here goes,
I've recently rooted my phone with a very simple guide, and it's the first device I've every rooted. So I know very little of the process of doing so, (I'm learning slowly).
I also have found a rom that I would like to install, but I would love to know if others think it seems legit? If it is real, I know many people would absolutely love to use it! The rom's URL is (ht tp:// playfuldroidz.com /wiki/ CyanogenMod_10_Motion) (Please remove spaces, sorry as I said i'm new...)
Now I don't mind testing this myself, but being as new as I am at android I honestly do not know how to follow the relatively simple instructions.
(This Is where I need some help, Please be noob cautious!)
Download the .zip & copy to phone or sdcard (make sure 4g or wifi is enabled if dl'd from phone).
Zip can be installed from either internal or external sd in CWM (Which ever you copied it too!)
MAKE A BACKUP!!!
DO A FACTORY RESET!!! - this will wipe data & cache!
Go to install zip from sdcard
Choose zip from sdcard
Select cm-10-xxxxxxxxxx-UNOFFICIAL-l0.zip
Confirm
Repeat Steps 5 -8 for gapps
Reboot
Now my first question I'd love some help with, is how do I perform this backup there talking about? do they just mean my simple go into settings and click backup? Or should I do it some otherway?
Second question: Do they mean the phones built in service of factory reset?
Third Question: To install a Zip from an SD card do I need to simply use ES file explorer, or root file browser? Or is there a custom way to install a Zip file on android?
Fourth and final Question: What is gapps..? Is this something I should get or use?
EDIT: I've got a fifth one also... Thanks to anyone who's stayed this long and is willing to help me.! Will this Cyanogen mod (If working) Work almost exactly like a real nexus Operating system? I've got a nexus 7 tablet running stock android, and I love it! That's why I'm doing this to my phone honestly.
Thank you all greatly!
Prophet968 said:
Hey everyone! I would like to start off by saying that I am brand new here, and am surely going to mess up quiet alot... But here goes,
I've recently rooted my phone with a very simple guide, and it's the first device I've every rooted. So I know very little of the process of doing so, (I'm learning slowly).
I also have found a rom that I would like to install, but I would love to know if others think it seems legit? If it is real, I know many people would absolutely love to use it! The rom's URL is (ht tp:// playfuldroidz.com /wiki/ CyanogenMod_10_Motion) (Please remove spaces, sorry as I said i'm new...)
Now I don't mind testing this myself, but being as new as I am at android I honestly do not know how to follow the relatively simple instructions.
(This Is where I need some help, Please be noob cautious!)
Download the .zip & copy to phone or sdcard (make sure 4g or wifi is enabled if dl'd from phone).
Zip can be installed from either internal or external sd in CWM (Which ever you copied it too!)
MAKE A BACKUP!!!
DO A FACTORY RESET!!! - this will wipe data & cache!
Go to install zip from sdcard
Choose zip from sdcard
Select cm-10-xxxxxxxxxx-UNOFFICIAL-l0.zip
Confirm
Repeat Steps 5 -8 for gapps
Reboot
Now my first question I'd love some help with, is how do I perform this backup there talking about? do they just mean my simple go into settings and click backup? Or should I do it some otherway?
Second question: Do they mean the phones built in service of factory reset?
Third Question: To install a Zip from an SD card do I need to simply use ES file explorer, or root file browser? Or is there a custom way to install a Zip file on android?
Fourth and final Question: What is gapps..? Is this something I should get or use?
EDIT: I've got a fifth one also... Thanks to anyone who's stayed this long and is willing to help me.! Will this Cyanogen mod (If working) Work almost exactly like a real nexus Operating system? I've got a nexus 7 tablet running stock android, and I love it! That's why I'm doing this to my phone honestly.
Thank you all greatly!
Click to expand...
Click to collapse
Question 1,2 and 3.. they are all done through Clockworkmod. Look through the menus you'll see it if you still struggle look on YouTube.
Question 4.. gapps is Google Apps you need to flash this after the ROM to get the play store and all the other standard Google apps.
Question 5.. in your eyes pretty much, it'll look the same but with more features obviously.
Thank you alot!
Thanks! now i've only gotta do one last thing, and see if anyone knows whether or not this website is a reliable source, or atleast if the mod works...
Prophet968 said:
Thanks! now i've only gotta do one last thing, and see if anyone knows whether or not this website is a reliable source, or atleast if the mod works...
Click to expand...
Click to collapse
Just give it a go mate, if in doubt try it out lol (don't quote me on that haha)
Alright I've got one last dumb question
CdTDroiD said:
Just give it a go mate, if in doubt try it out lol (don't quote me on that haha)
Click to expand...
Click to collapse
I was just wondering if there's a chance this clock work mod thing doesn't work on my phone? I don't really know how, or where it is either... and I'd love some help with that... Thank you!
(Edit) I don't think there is a clockwork mod for my device... According to the Rom Manager app I was told to use for installing it.
Prophet968 said:
I was just wondering if there's a chance this clock work mod thing doesn't work on my phone? I don't really know how, or where it is either... and I'd love some help with that... Thank you!
(Edit) I don't think there is a clockwork mod for my device... According to the Rom Manager app I was told to use for installing it.
Click to expand...
Click to collapse
If you did what it said in the instructions *root it, cwm, install custom rom* then after installing the custom rom it has it's own cwm. turn off the phone, turn in back home and press the back and home button together at the same time and it should take you to the rom's cwm. If the phone does a factory reset by pressing the back and home button then you did the installation wrong.
But just in case I'll setup a full instruction for you.
Root your phone.
Which can be done easily, just download this and extract the files: http://www.mediafire.com/?dhdbwflnl1vknx2
once you extract the files put your phone on debugging mode which can be done by going to settings, developer mode, and click usb debug.
once you've done that connect your phone to the pc *make sure it's on charge only* wait for driver installation to finish. once that's done click root. follow instructions on the screen it shouldn't be too hard! after following instructions you should be rooted and have cwm. but to install the recovery go to your apps and find lte 2nd init recovery and then click the top button, agree to super su to use it and you're done with rooting and cwm! now. these files you were talking about, download them and put them on sd which can be done with a file manager. after they've downloaded go to the lte 2nd init and click the bottom button. it will reboot the phone and take you to cwm. While you are in cwm click on the home button to go to external which is the sd, then go to backup and restore, and click backup! this is very important. miss this step and things could go bad. Now all you have to do is follow the instructions you posted yourself and you should be done! if you need any help don't hesitate to message me. I've done this for a long time now.
Whoops forgot to add. the website IS a reliable source. Learned that cause I'm a risk taker and decided to try it out myself. and do not use rom manager or anything like that for recovery. ever. especially on phones that do not have their own recovery mode. also. the CM10 works great in my opinion! But there's a catch. for me at least. even though everything is perfect during phone calls I cannot use my 4g. which is a bad thing for me cause I need it. other than that if that doesn't bother you or anything or don't have service then knock yourself out and install the cm10!
COMPLETED) This mod worked, all things are now finished except one small issue!
So after installing the mod with some great help of someone here on this forums, I've been basically beta testing the mod for a few days. I have nearly no complaints, as almost everything works seemlessly just like you'd except the operating system to. In the end I found one single issue though, which is terribly annoying for me in specific...
My GPS isn't working, which could be one of many things other than the rom. Seeing as I only recognized It yesterday, there may be an outside reason it at random shut off. If anyone know's what can cause this, and a fix for it please comment back!
Thanks to everyone who helped with installing the mod
Check out www.unleashedprepaids.com. have whole section on lg motion custom ROMs help guides everything u need!
Sent from my LG-MS770 using Tapatalk 4
Please help me with the rom
Hey guys not sure if i am suppose to post this here but i couldnt find any where else and i couldnt find an answer with my exact problem, i installed this rom on my moms lg motion and everything went find untill i got to gapps it came up with an error inside of cwm so i just contined all the other flashes i had to do and rebooted i thought that i could just flash gapps later. But i mad a very big booboo i installed the Recovery APK for it in cm 10 i forgot all about pressing reboot and saying reboot into revocovery so i was going to try it though the Recovery APK so i installed the thing and pressed reboot and instead of taking me into recovery it takes me to a screen that says something like "mourning call error" which i dont know what means but i had to take out the battery and turn the phone back on so that worked and i got back to the home screen but i still cant install gapps so she can use all the google sevices i tried rebooting with the built in reboot into recovery (the one that you press reboot when you hold the power button) and that does the same exact thing i have no way of flashing gapps or anything else for that matter can someone please help me i have no idea what to do. everything i working on the phone but that. thank you sorry if i put this in the wrong place.
Confused my droid using this method- would love in on this thread
Sorry if I'm posting in the wrong place-punch me if I have-
I rooted my lgms770 with version f firmware- installed cwm and 2ndinit recovery (2nd init was the only known way (to me anyway) to get into cwm at the time) followed this guide ---
[LgMotion All Things root] and
[GUIDE] Unbrick OR Unroot LG Motion 4G [KDZ] - Android Forums
I am not allowed to post urls yet...sorry...its the the first google hit
I've tried multiple versions of the official LG Firmware flash, from the website, and by following this guide-
AOKP Dirty Unicorns baseless port cm10 - Android Forums Actually, its the unicorns that got me.
With no luck there. I am running Mint16, and had to run the programs through Wine of course, then tried Q4wine, and eventually tried running though Oracle VM, and finally, I wiped my ancient dell of Linux altogether and put WinXP back on it (took 2 hours, that). No cigar. And yes, I did the drivers, all in order, etc, tried again, reinstalled etc
I finally set up adb to try to get into this droid that way, but am having problems with port permissions (I'm going to guess that's on my pc's end-running Mint16)
I can access the factory reset screen (the black and white), download mode, and the battery charges on a black screen with a nice purple font, but I am still stuck in a bootloop. I've employed all known button spamming combos to get back into cwm (there is a nandroid in there somewhere)..but alas...
Help me Obi-Wan-Kenobi's..
Peach
I had the purple letters with no way to get to the factory reset screen i just used the lg online flash tool in upgrade recovery put in the imei of the phone in made sure the phone was in usb download mode then it was fixed but for some odd reason i still cant get my phone to the factory reset option. I apologize sincerely if I wasn't detailed enough if you need any clarification on it then let me know through pm or i could even send u a link to my box folder i keep the install files in.
(Also i have a one click root app for the LGMS770 So if you or anyone would like the link i would be happy to give it to you)
Sent from my MetroPCS LG-MS770 using Tapatalk

Categories

Resources