Related
Just ordered and installed Realook screen protectors and I couldn't be more pleased. I have used other screen protection from Zagg and Sprint and I did not like them nearly as much. I will do my best to describe what its like but you really need to see it in person.
Feel:
The material is a firm plastic that when applied feels nearly the same as the bare glass. I did not like Zagg because it felt soft and textured like an orange peel. This stuff is 95% the same feel as glass and I waited 20 days before installing it, so I have a good level of comparison.
Look:
Clear as glass. I have not yet tested what effects it has on glare, but there is no noticeable difference indoors. Also it is ready to go 30 seconds after installing. All you need to do is push out the large air bubbles. It doesn't take 1 or 2 days to settle like some other protectors. Other people in this thread reported a rainbow reflection in the sun light when the screen is off.
Installation:
Before I started I ran the shower on hot to fill the bathroom with some steam to settle the dust. There is nothing that will bother me more than a single spec of dust under a screen protector, I will obsess about it to no end. Due to my rough and dry hands I am a dust machine and I have never failed to get at least 1 piece of dust under every screen protector I have installed. This time was no different. I mis-aligned the screen on installation and had to peel it back, when I did 1 spec of dust planted itself. I used a piece of tape they include in the box to peel back the screen, and another piece of tape to pull off the dust and it was clean. I am sooo happy about this point. Other protectors I used with adhesive would grab onto dust and never let go. Since it does not use adhesive so it is easy to put on and peel back off if you made a mistake.
The Bad:
Back button less responsive. It will still work on the first touch every time, but you do need to touch a little harder than before.
Box Includes:
2 screen protectors.
1 Wet wipe
1 Plastic card to push out air
2 pieces of tape(if needed)
1 microfiber cloth(to clean the screen before and after installation)
Sorry for the slightly blurry photos. Taken with another Epic4G and it doesn't like to focus on close ups.
$11 at Amazon
does it make the screen fuzy?
Perfectly clear. I wish I had a better camera to show it.
edit: I just discovered macro mode in the camera settings. I will post more photos soon.
Returned the Sprint speckled ones that was degrading display quality to the local Sprint store and am awaiting delivering of Realook for both Samsung Epic and Panasonic GF1 camera. Realook sounds like the best option and value out right now for the Epic until Steinheil Ultra Oleophobic is made available for comparison.
a holes wouldnt take mine back
+1 for Realook! Best screen protector i have used. Same experience as Pops.
I also went to Realook after Skinomi. Love Realook! Slick, smooth feel like the original glass. Relatively easy to apply. No screen degradation. Wonderful, all around.
does no opening for cam hinder it?
Anyone want to trade their spare ReaLook for a pair of PhantomSkinz screens?
I also have the Realook on my phone and it's absolutely great.
But since no one actually pointed out the cons, I'll try to list a few:
- It's not a PERFECT fit so you'll find gaps on all four sides. I'm concerned that dust may eventually get stuck in those gaps.
- I don't exactly remember how the bare screen was now that I have the Realook on, but I think the Realook makes the screen a little more "reflective".
- Under artificial lights (esp. fluorescents), you'll notice the interference patterns like straight rainbows. Hard to explain but people with screen protectors on any phone may have seen them before.
- The capacitive buttons become less responsive meaning that you'll have to push them harder.
churro7 said:
does no opening for cam hinder it?
Click to expand...
Click to collapse
Doesn't seem to. It is pretty optically clear. With 640x480, you probably wouldn't notice if there was any difference anyway.
tonysohn said:
I also have the Realook on my phone and it's absolutely great.
But since no one actually pointed out the cons, I'll try to list a few:
- It's not a PERFECT fit so you'll find gaps on all four sides. I'm concerned that dust may eventually get stuck in those gaps.
- I don't exactly remember how the bare screen was now that I have the Realook on, but I think the Realook makes the screen a little more "reflective".
- Under artificial lights (esp. fluorescents), you'll notice the interference patterns like straight rainbows. Hard to explain but people with screen protectors on any phone may have seen them before.
- The capacitive buttons become less responsive meaning that you'll have to push them harder.
Click to expand...
Click to collapse
I agree with all of those. I only have a gap on the bottom, though. Left and right seem to be exact.
I see the rainbow effect but it doesn't seem to cause any problem for me. I really don't notice it unless the display is off.
I do have the less responsive buttons, especially the back button. I'm wondering if I could slice off the bottom centimeter of the protector smoothly enough to make it worth trying.
Jason
I like it, but...
It's harder to clean than the Gorilla Glass of the Epic. It also has more friction than the Gorilla Glass. Your fingers won't glide across it as effortlessly. Finally, it has slightly rough edges that you can feel.
I should sell my unused RL screen for 5 bucks or something. Do people typically do that with their unused protectors?
Just ordered mine from amazon after reading this thread, i hope it is as good as you say it is. I have used Zagg a few times before, and Skinomi twice, and BodyGuardz on my nexus one. my favorite was BodyGuardz, but for 10 bucks i think it is worth trying this one. ill give feedback when it gets here in a few days.
If anyone wants another (good) opinion, here's a review from ppcgeeks.
I posted my review on realook a while back on ppcgeeks. Best protector ever IMO. http://forum.ppcgeeks.com/sprint-ep...king-screen-protector-tips-4.html#post1942030
Post #34
Sent from my SPH-D700 using XDA App
i use skinomi very nice and slick
I might give real look another chance but I used one on my touch pro 2 for a few months it looks and feels absolutely great however when i took it off today there was definitely some residue left behind. Swiping on the screen was not as smooth as when i first bought it. I just got my epic today and blew the installation of the clarivue protector. I don't think reallook has no adhesive, I think it has some adhesive so before I give them a try again i am gonna try boxwave and clarivue 1 more time.
the best protector IMO
I agree that the Realook protectors are the best. I installed mine a week ago and i'm really liking it. The look is awesome, the fit is perfect and it doesn't really have much more drag then the naked glass. The one issue is the fingerprints and oil residue. I can tell you that the phone is much more difficult to keep clean with the Realook, but that's not big of a deal. I used to just use my shirt or pants to wipe the phone clean, and now i have to use a microfiber. Even then it takes about two to three times the effort to get the oils off. I would still recommend this product.
I just got my real look in today (ordered thursday night) and i have a 10% off coupon code if anyone plans on getting one via amazon before the 30th.. pm me if anyone wants the code...
ordered from same link the OP posted $11 shipped so coupon will drop a buck off.. nothing much but I figured id throw it up here
UPDATE:the coupon is spoken for.
Ok i need to first say Pops_G you rock for informing me about this screen protector, and your method with the shower was genius, wish i did that when i installed all the other screen protectors in my past. On to my experience...
I just got the Realook Screen protector today, and i previously stated in a prior reply, i have tried zagg invisible shields, BodyGuardz ( OLD FAVORITE ) and Skinomi. The application of the Realook Screen protector was hands down, the Easiest ever, i didn't think it could go that fast. And in terms of how it looks and feels, I could not believe my eyes. You seriously cannot tell when looking at the screen that there is a protector on there. Zagg, Bodyguardz, Skinomi all have, in some regard, no matter how small, a orange peel effect, where there are small ripples in the screen from the water that is used in the installation process, they go away in time, but it is slightly noticeable. They also feel rubbery and take away from the graceful movements of the screen. Plus you have to turn off the phone, pull batter, use a water/soap spray mixture, worry about air bubbles, let it dry 24 to 48 hours, and wake a week plus for the solvent to evaporate. I had this Realook applied in 5 minutes, it would of been less, but i was super anal about making sure not a spec of dust was on the screen. lol.
Now this is just my first impression, after a hour or so of use. It is plastic which makes it feel very much like the original screen, although im sure that will allow the screen protector to scratch, unlike zagg, bodyguardz, and skinomis rubber film where they wont, unless you really try. And also it does show the finger oils more than the actual glass does. I am ok with this becasue that is the purpose of the protector, to get scratched and not the actual screen, Plus i have a backup because 2 came in the pack. GREAT DEAL. Second, i only see this screen protector working for phones that have a completely flat screen and have some sort of small lip around the phone. For Example: I dont think it would work best on a palm pre, which has no lip, and then it could be more easily peeled off down the line. But for the Epic 4g... Seriously im in love.
Thanks again Pops_G
I've been looking all over the internet and I've been unable to find anything that looks like it would keep my greasy ass hands from messing up my touchpad screen. Does anyone else have any ideas?
Sent from my HP TouchDroid
I would like to know too. I hate having to use my shirt to scrub the screen clean. lol. But I'm sure ANY screen protector is better than having none.
I've read that rainx works for what you are trying to do.
Sent from my PG86100 using XDA
mrtomaso said:
I've read that rainx works for what you are trying to do.
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
Just looked that up. I dont know if I'm comfortable with putting that stuff on my TouchPad. Even though others have said it works well.
Yeah I was looking for something more like the matte plastic skin I have on my razr
Rootin' and fastbootin' on my Droid razr
Zagg Skinomi BodyArmorz,
cdzo72 said:
Zagg Skinomi BodyArmorz,
Click to expand...
Click to collapse
I was about to suggest military shield, but I think I'm going to try skinomi because its half the price with decent reviews (via amazon). I have the military shield on my phone screen, and it is freaking awesome. Crystal clear, NEVER scratches so it seems, fairly resistant to fingerprints, and it has a nice, natural feel to it. Zagg on my cousins vibrant felt waaaaaay too sticky/tacky. Just not natural at all. Will let y'all know when I order/test the skinomi protector.
dung8604 said:
I was about to suggest military shield, but I think I'm going to try skinomi because its half the price with decent reviews (via amazon). I have the military shield on my phone screen, and it is freaking awesome. Crystal clear, NEVER scratches so it seems, fairly resistant to fingerprints, and it has a nice, natural feel to it. Zagg on my cousins vibrant felt waaaaaay too sticky/tacky. Just not natural at all. Will let y'all know when I order/test the skinomi protector.
Click to expand...
Click to collapse
Skinomi is the same tacky crap as zagg.
I find just getting any "Matte" screen protector works wonders. It scatters light, and doesn't seem to attract fingerprints the way those other shiny guards do. I got one on Ebay for $3. Just type in Matte screen protector touchpad for a cheap solution.
Sw339 said:
I find just getting any "Matte" screen protector works wonders. It scatters light, and doesn't seem to attract fingerprints the way those other shiny guards do. I got one on Ebay for $3. Just type in Matte screen protector touchpad for a cheap solution.
Click to expand...
Click to collapse
Any tips on best approach to apply these where you get no bubbles and it lines up right? I suck at doing these for phones.
famewolf said:
Any tips on best approach to apply these where you get no bubbles and it lines up right? I suck at doing these for phones.
Click to expand...
Click to collapse
Well its pretty easy, you just need a sticky tape and a good eye.
You need to do it in a clean room, and obviously you need to clean the screen first.
If you failed at the first attempt, just peel off and try again, no harm on doing that.
The easiest way to align it is to aim for the camera hole and the home button, just make sure they are centered when u aim it.
If you have bubbles after application, this is most probably caused by dust (or just bad quality screen protector) if it is a dust, just use the sticky tape to remove the dust. The sticky tape will not leave any mark on your screen nor the screen protector.
Hope this tips will help
Putting it on in a steamy bathroom also helps keep the dust out of the air. On your first attempt, try to peel it off of the backing as you apply it, pushing trapped air out as you go. It gets a bit trickier when you have to handle the whole thing peeled off.
Okay, so after using the skinomi skin for about a week now, I have to say I like it. One of the reasons I got my stylus was because I hated fingerprint smudges on the screen, and with the skinomi, it is hard to see any smudges after multiple uses. May ditch my stylus now, who knows.
Anyways, a couple things to note:
1) as another user stated, put the skinomi on after a hot shower with the door closed. You want the mirrors good and steamed up
2) line up the home button first. My skinomi is a little off and so its closer to one edge of the screen than the other. No biggie, really, just full disclosure
3) don't worry about the camera hole so much. For one, camera doesn't work on cm9 anyways. For two, even if it seems like the skinomi is a little bit over the lens, I don't think its a big enough of a deal. You could line it up perfectly on the camera, but you run the risk of your home button being overlapped by some of the skin
4) while squeegeeing, use the included cloth to wipe up any solution that gets pushed to the edges. Maybe not necessary, but I did anyways
5) once you are done, IT WILL LOOK LIKE THE CRAPPIEST SKIN/SCREEN PROTECTOR EVER. Again, don't worry. After 2 or 3 days, it will should look great.
I would post pics, but what's the point? If anyone wants, I guess I could. anyways, for about 7 bucks, I would definitely recommend the skinomi protector. It does not feel all tacky like the zagg stuff, its actually pretty nice.
http://www.spigen.com/new-product/spigen-sgp-htc-one-x-screen-protector-steinheil-ultra-series.html
Two choice,
1.Ultra Fine
2.Ultra oleophobic
which one is batter?
thanks
I don't use them ...
farwish said:
http://www.spigen.com/new-product/spigen-sgp-htc-one-x-screen-protector-steinheil-ultra-series.html
Two choice,
1.Ultra Fine
2.Ultra oleophobic
which one is batter?
thanks
Click to expand...
Click to collapse
I don't use screen protectors on any phone with gorilla glass. It's basically unnecessary. It's virtually impossible to scratch the screen unless you really make the effort.
Remember, it's glass. Why not take a fork and try your best to scratch a window made of glass. It can't be done.
Peter
I get where you're coming from Peter but just because you don't want screen protectors doesn't mean you shouldn't try and contribute to someone who does. My Captivate had gorilla glass and it has plenty of scratches just because of grit. It happens, no matter what.
However, Ultra Fine is just going to be super clear, and Ultra Oleophobic will do it's best to keep finger prints from showing/building up.
PeterHTC said:
I don't use screen protectors on any phone with gorilla glass. It's basically unnecessary. It's virtually impossible to scratch the screen unless you really make the effort.
Remember, it's glass. Why not take a fork and try your best to scratch a window made of glass. It can't be done.
Peter
Click to expand...
Click to collapse
I used to use screen protectors all the time until my nexus one, had that phone for 2 years with plenty of abuse, including at least 4 good drops, one in a cement underground parking floor with a small kick and slide for good measure, my hart stooped on that one! still not a scratch on that phone.
so i did not get one for my galaxy nexus, dropped it once while kneeling on the flatbed of a tow truck, not a very far drop at all, and got 1 nasty looking scratch and 3 minor ones! ruined my day, week even i still look at it and get sad.
i have no idea what glass is in the galaxy nexus, but to me it was very easy to scratch, if i can find a screen protector for the xl that is not annoying to look at i will probable start using one.
just sayin
grinmaul said:
I used to use screen protectors all the time until my nexus one, had that phone for 2 years with plenty of abuse, including at least 4 good drops, one in a cement underground parking floor with a small kick and slide for good measure, my hart stooped on that one! still not a scratch on that phone.
so i did not get one for my galaxy nexus, dropped it once while kneeling on the flatbed of a tow truck, not a very far drop at all, and got 1 nasty looking scratch and 3 minor ones! ruined my day, week even i still look at it and get sad.
i have no idea what glass is in the galaxy nexus, but to me it was very easy to scratch, if i can find a screen protector for the xl that is not annoying to look at i will probable start using one.
just sayin
Click to expand...
Click to collapse
ditto here. i noticed the other day i had a tiny scratch up near the ear piece of my GNex. mine has never been dropped so not sure where i got it from but it was the first phone i went completely naked with. won't make that mistake again. def getting a screen protector and most likely the SGP Oleo.
PeterHTC said:
I don't use screen protectors on any phone with gorilla glass. It's basically unnecessary. It's virtually impossible to scratch the screen unless you really make the effort.
Remember, it's glass. Why not take a fork and try your best to scratch a window made of glass. It can't be done.
Peter
Click to expand...
Click to collapse
Any minute particle of sand will scratch gorilla glass without exception.
You are 1) being irresponsible, 2) promoting those irresponsible ideas to others.
Gorilla glass is not scratch proof by any means. It has barely higher hardness compared to normal borosilicate glass, and it's far softer than sand.
nabbed said:
Any minute particle of sand will scratch gorilla glass without exception.
You are 1) being irresponsible, 2) promoting those irresponsible ideas to others.
Gorilla glass is not scratch proof by any means. It has barely higher hardness compared to normal borosilicate glass, and it's far softer than sand.
Click to expand...
Click to collapse
Calling someone irresponsible is a bit harsh, no? It's a difference in philosophy. Many people don't believe in screen protectors. I live in sandy Florida and I've been just fine. My friend on the other hand scars his screens.
vioalas said:
Calling someone irresponsible is a bit harsh, no? It's a difference in philosophy.
Click to expand...
Click to collapse
True, its all a matter of personal choice. There is a tiny change in the feel when you use a screen protector, and some don't like it. If a person chooses not to use a screen protector, and willing to live with scratches (if they do occur) then that's totally up to them. If someone scratches the screen, and claims the GG as "defective", then I suppose that is irresponsible (as there is not advertised guarantee against scratches).
That said, GG is far from impossible to scratch. Its intended to be scratch resistant, but can still be scratched (and even cracked). Coming from another device with GG, I can tell you that I have seen many cases of people that got scratches after normal use, and no obvious instances of abuse, drops, etc. And if you remember when the iPhone first came out with GG, there were also plenty of instances of people getting scratches almost immediately after release. On the other hand, plenty of people have had good luck with no scratches on GG, even after serious drops, etc. A bit of luck is certainly at play. But if you don't use a screen protector, and end up with a scratch, you can't easily undo it. IMO, its better to use a protector, and not have to worry about such regret.
A good quality screen protector has very minimal change in feel (although there is a very slight difference) no change in look, and will also attract fingerprints and smudges a bit less than the "naked" screen. Cheap ones are not worthwhile, and often look and feel much worse, and can start peeling off easily. Some people that are against protectors, may be due to experience with a cheap one. Bodguardz and Skinomi are quality ones that I have used, and there are plenty of other good ones.
Hey guys, this topic was started to answer a mans question about the difference between two types of screen protectors not borosilicate and gorilla glass. I feel that this topic should be A. closed if nothing good is to be added, or B. put back on topic for the benefit of OP.
okay, i'll knock his question out really quick...
the Ultra Fine (Anti-fingerprint) is a matte type of screen protector. because it is matte, it's going to degrade the colors a little bit. they won't be as vibrant as without this particular protector.
the Ultra Oleo is a clear screen protector. approx 100% of the colors will still come through as if you didn't have this one on. it's made to be resistant to fingerprints, though the Ultra Fine is going to do a far better job of keeping fingerprints off.
so, you have to ask yourself this...
do you mind losing some of the pop from the colors to keep fingerprints off of your screen, or would you rather see your display like there was nothing on it but have more visible fingerprints?
i always go with the clear ones. i had a matte protector on an old iPhone (3G?) and didn't like it. haven't had a matte one since.
Its a bit hidden, but it says on the product webpage FAQs:
What are the differences between the Steinheil Ultra Fine and Ultra Oleophobic Screen Protectors?
All of our screen protectors are Japanese made, enhanced optical hard films. The Ultra Oleophobic screen protectors is a clear type where it absolutely doesn't affect the screen image quality. Ultra Oleophobic has an oil resistant coating to resist oil and other contaminants. Ultra Fine screen protector is matte type hard film which resists against fingerprints and smudges, but it is less clear compared to other Steinheil screen protectors.
So it seems the main difference is that the Oleophobic seems to be the "regular flavor", while Ultra Fine has a matte finish (and $2 more). What is "best" for matte versus regular finish is typically a matter of preference. Matte tends to give less glare (and might be helpful outdoors in sunlight) but tend to be less clear, and may have a tackier feel or even textured feel (not sure if the different feel is true for this particular brand). Hopefully somebody with specific experience with this brand can give an opinion.
Some people (like the previous reply) don't like matte; while I've seen others that seek it out.
Question about these screen protectors, if anybody has used them, can you post a picture? All the protectors I've seen for the One X so far look bad because of the way the screen is shaped, they curl up on the edges.
http://forum.xda-developers.com/showpost.php?p=25084817&postcount=69
there ya go vioalas, that's the skinomi protector, and it's a wet app so it's just like, the best fit possible. Hope that helped!
vioalas said:
Question about these screen protectors, if anybody has used them, can you post a picture? All the protectors I've seen for the One X so far look bad because of the way the screen is shaped, they curl up on the edges.
Click to expand...
Click to collapse
I can't do a pic (at work) but I have only used the Ultra Oleophobic on my past two devices, and it is the closest thing to the feeling of the glass out there. There is still a tiny bit of drag that isn't present on the screen, but really is barely noticeable.
Because these are dry application protectors, they can't go all the way to the lateral edges of the One X's screen, apparently it has a slight taper/roll and the SP would lift. My Galaxy Nexus (with the contoured screen) leaves about 2mm all the way around, and that was very clear in SGP's pics on their website. Their pics for the one X show less of a gap and the gap is mostly on the sides, so I think it will look better than it does on the Galaxy Nexus...
s.m.knipe said:
I can't do a pic (at work) but I have only used the Ultra Oleophobic on my past two devices, and it is the closest thing to the feeling of the glass out there. There is still a tiny bit of drag that isn't present on the screen, but really is barely noticeable.
Because these are dry application protectors, they can't go all the way to the lateral edges of the One X's screen, apparently it has a slight taper/roll and the SP would lift. My Galaxy Nexus (with the contoured screen) leaves about 2mm all the way around, and that was very clear in SGP's pics on their website. Their pics for the one X show less of a gap and the gap is mostly on the sides, so I think it will look better than it does on the Galaxy Nexus...
Click to expand...
Click to collapse
thanks for input on the actual fit with dry protectors. i thought the glass was flat on the One X if true, the only way to get a complete fit would be wet applications. guess i'll finally have to use a wet application.
mrvirginia said:
thanks for input on the actual fit with dry protectors. i thought the glass was flat on the One X if true, the only way to get a complete fit would be wet applications. guess i'll finally have to use a wet application.
Click to expand...
Click to collapse
No, I think it is just the gradual roll the edges of the screen do to meet the plastic. the screen itself is flat, and the roll appears to only be on the left and right sides. I think even wet application ones would have trouble with it... look at some of the pics that depict the phone in profile; the part of the screen glass that protrudes above the plastic (best noticed in the white model) seems to have a radius (or "roll") to it.
Any other places to get these now that fit.. Dry and not $16
s.m.knipe said:
No, I think it is just the gradual roll the edges of the screen do to meet the plastic. the screen itself is flat, and the roll appears to only be on the left and right sides. I think even wet application ones would have trouble with it... look at some of the pics that depict the phone in profile; the part of the screen glass that protrudes above the plastic (best noticed in the white model) seems to have a radius (or "roll") to it.
Click to expand...
Click to collapse
ahh gotcha. well so far it sounds like the skinomi is the way to go. i was never a fan of that orange peel effect but if that's the best then that's what i'll have to go with.
mrvirginia said:
guess i'll finally have to use a wet application.
Click to expand...
Click to collapse
The wet apply protectors are not as scary as they would seem. Your lightly spray the application fluid onto the protector, and its really not enough to penetrate into any cracks. And even if it does, its not enough to short circuit anything. Have the device powered off, and let it dry for the recommended time, and you will be fine.
I used dry apply protectors for my first couple smartphone, as I was also a bit wary of the wet apply method. But when I finally went the wet apply method, I found it easier to install. The wet method give you some time to get the protector perfectly in place before the protector adheres.
---------- Post added at 06:15 PM ---------- Previous post was at 06:13 PM ----------
mrvirginia said:
ahh gotcha. well so far it sounds like the skinomi is the way to go. i was never a fan of that orange peel effect but if that's the best then that's what i'll have to go with.
Click to expand...
Click to collapse
I have a Skinomi installed on my Flyer tablet, and am quite pleased with it. its very smooth with no noticeable orange peel effect.
I guess I'll do the wet application. Would you guys trust the radioshacks/bestbuys that offer to apply it for you?
I got my screen protector in the mail today and put it on my phone. I figured I should share my thoughts along with some pictures for those who are looking at screen protectors.
The pack came with two screen protectors, a squeegee, some dust removal stickers, and a small micro fiber cloth. The protector was not too bad to put on, pretty similar to other dry application ones and the Realook which I have used on my Samsung Vibrant. It was kind of tough to align because the screen protector is literally exactly the width of your screen, so if you're off alignment, it looks horrible.
The screen protector is definitely super clear. It also is a fingerprint magnet, and it feels slightly tacky. I'm hoping that tackiness will go away as it gets more use, because I like being able to glide over my screen smoothly.
One huge disadvantage with this screen protector is that because of the curved screen, the protector only covers the flat part. It is definitely noticeable when you see it closer. I tried taking pictures to depict this. I also with they would have just had the protector cover the FFC. I'm not sure how it would actually affect the optics (if at all), but I really hate that cut out! Overall, I'm decently content with my purchase, but I would love to see pics and reviews for BSE when those arrive since I'm considering that for the back, and even replace the front if I end up not liking the Spigen.
Thanks so much for these. I used the SGP on my Gnex and loved it. There's something special about these Crystal series ones but I don't remember what it is.
Sent from my Nexus 4 using Tapatalk 2
I got the Ultra Clear for my N4. It hasn't arrived yet, so for now I'm using my spare One X Oleophobic. The Oleophobic is great, really good for repelling fingerprints, I would have got it but when I bought my N4 UltraClear they weren't selling the Oleo. Thanks for the pictures, it seems to fit a lot better than the One X SGP protectors did on the One X. Doesn't look too bad at all.
I got the crystal clear and I have the same issue with the protector being too small. I know that this has been the case with some their other protectors, but I'm going to have to try some other brands. I can't stand it being cut off like this.
Sent from my Nexus 4 using xda app-developers app
Where did you get it from ?
juventuss said:
Where did you get it from ?
Click to expand...
Click to collapse
The Spigen website.
I wonder if using the Google Bumper will hide the fact that it doesn't quite reach the edges.
I got the oleophobic one in today from SGP, it doesnt cover the whole screen either. Better than nothing i guess for now.
I'm starting to have a huge distaste for the curved screens. Feels nice with the hardware buttons on my S3, but looks like utter garbage with a screen protector.
jackierobinson said:
The Spigen website.
I wonder if using the Google Bumper will hide the fact that it doesn't quite reach the edges.
Click to expand...
Click to collapse
The bumper does not cover it.
Also big warning for people looking to buy SGP: The light sensor is covered by this screen protector (not cut out like most) and it interfered with the functionality of the phone. In the past I've had screen protectors that went over the sensor without issue, but with this particular protector and phone, it did not work.
For example if i went to make a phone call, the screen would stay dark even if i took the screen away from my face. Also auto brightness didn't work either. I had to cut the film to expose the sensors. Everything is working normally now. Anyone else have this issue?
Also received mine today, dont have the phone yet though. Not feeling too happy about it already seeing as it doesnt cover the curved screen too well... Money down the drain then :s
Mine will arrive today and I plan to put it in a case so its not a big deal. The SGP on my Note 2 didn't go all the way to the edge either. A tpu case fixed that and everything was covered.
Sent from my Nexus 4 using Tapatalk 2
Good thing I waited. I am planning on using this phone with screen protectors only and I can't pay for a high quality one that looks pretty bad IMO.
Looks great. SGP never usually covers the entire front. It is always just a tad bit smaller.
You guys do know it has to be cut smaller because the curved edges will make the protector peel right?
ceejay83 said:
You guys do know it has to be cut smaller because the curved edges will make the protector peel right?
Click to expand...
Click to collapse
Yes, I'm just hoping someone finds out a way to make t stick over the curved glass. I guess I am going to have to go with a wet screen protector.
ceejay83 said:
You guys do know it has to be cut smaller because the curved edges will make the protector peel right?
Click to expand...
Click to collapse
Yes, but it stops way short of the curve. It literally just covers the display (width wise). They could have extended it a bit further. This is going to leave a gap, even with a TPU case on it.
How is the smoothness of these screen protectors? I really like the way zagg HD screen protectors feel and I'm looking for something similar.
Just received mine today. Installation was straightforward and the dust removal stickers easily snatched up the remaining few bits of dust at the end. The surface slickness is shockingly poor at first but improves drastically after just a few minutes.
The film doesn't run all the way to the edge due to the curvature of the screen, but there may be a solution. Steinheil makes a dry application edge to edge film called Curved Crystal for the SGS3 which also has a curved edge screen. If there is enough interest, I'm sure they will make one for the N4.
NYConex said:
How is the smoothness of these screen protectors? I really like the way zagg HD screen protectors feel and I'm looking for something similar.
Click to expand...
Click to collapse
I'm not sure how smooth the zagg HDs are, but right after you put the screen protector on, it is really tacky. But it gets much more smoother as you use it. I think that as you use it more, you're depositing more skin oils onto to screen protector and it kind of "seasons" the screen protector.
This sounds weird, but I just put a bunch of fingerprints on it, then I distributed it using a dry kimwipe (i'm sure a microfiber would work too) and after using it for about 24 hours, it's pretty much as slick as you would expect from the bare glass. Also, of course there is no orange peel feeling since this is a dry application screen protector.
ewuzh said:
Just received mine today. Installation was straightforward and the dust removal stickers easily snatched up the remaining few bits of dust at the end. The surface slickness is shockingly poor at first but improves drastically after just a few minutes.
The film doesn't run all the way to the edge due to the curvature of the screen, but there may be a solution. Steinheil makes a dry application edge to edge film called Curved Crystal for the SGS3 which also has a curved edge screen. If there is enough interest, I'm sure they will make one for the N4.
Click to expand...
Click to collapse
they already emailed me back saying they don't have plans to make any.
Now that people are starting to receive their phones and accessories from OnePlus, I am very curious to hear people's thoughts on the official tempered glass protector offered from OnePlus.
Specifically, how does it fit with the OEM cases OnePlus offers. Most importantly, does it fit with the thicker OnePlus Bumper cases?
The good news, according to OnePlus's official install video posted on their website, it does look like it fully adheres to the screen.
https://www.oneplus.com/oneplus-6-3d-tempered-glass-screen-protector
Looking forward to feedback before I place an order for one to potentially replace the pre-applied plastic screen protector.
sn0warmy said:
Now that people are starting to receive their phones and accessories from OnePlus, I am very curious to hear people's thoughts on the official tempered glass protector offered from OnePlus.
Specifically, how does it fit with the OEM cases OnePlus offers. Most importantly, does it fit with the thicker OnePlus Bumper cases?
The good news, according to OnePlus's official install video posted on their website, it does look like it fully adheres to the screen.
https://www.oneplus.com/oneplus-6-3d-tempered-glass-screen-protector
Looking forward to feedback before I place an order for one to potentially replace the pre-applied plastic screen protector.
Click to expand...
Click to collapse
I don't get my phone until later today, so I can not confirm until then. But the two different customer service reps I talked to guaranteed the TGP works with the OEM bumper cases. They said the only case it isn't compatible with is the outterbox case.
suprstar29 said:
I don't get my phone until later today, so I can not confirm until then. But the two different customer service reps I talked to guaranteed the TGP works with the OEM bumper cases. They said the only case it isn't compatible with is the outterbox case.
Click to expand...
Click to collapse
Looking forward to your results! If it does fit with the OEM bumper case (specifically the Nylon bumper case for me) I'll use my $20 promo voucher to order the glass protector as well.
I will say the preapplied plasic protector surprised me.wkth how good it feels. I usually do a glass protector but once I get my I will probably leave the plasitc on to see how it wears. Be good for the long term review since most on even know it's there at first
Sent from my Pixel 2 using Tapatalk
Here take a look at this. I''ve just posted it to the official forums to I'll C+P here;
----
Hi all,
Hope you've not forgotten me! I'm back. I went down to the London launch as I was super excited to see the OnePlus 6 in person and I've now got my hands on the phone and the official tempered glass. So as I have done every year, I'm going to be testing out as many accessories that I can get my hands on, starting with the Official Tempered Glass Screen Protector!
Feel free to watch the video to get all this information, or just scroll down and read it if you prefer!
Some of you wonder why take of the pre-applied factory screen? Well for me, it's all about finding the best protection for your device and from experience the pre-applied screen is not that. It's a nice bonus, as if you're not buying the official you'll have to wait around a week or so before third party manufacturers get screens ready for sale. Mine was also riding slightly high on the screen, which meant using it whilst having gestures turned on was a bit of a nightmare.
As usual the screen protector, comes well packaged, with some excellent tools- most of which you won't need if you're taking the pre-applied screen off and then putting this one on straight away.
The screen protector as with the last few years comes on a single slab of plastic/glass, which you will need to be careful off when you're removing the screen protector from it. I've seen many people CRACK their screen protector at this point. Don't be that person! Go slow, but surely. And for goodness sake once you've peeled it off, don't turn it around and let all the dust particles in your house get on it!
The screen protector fits nicely on the phone and feels pretty decent. High quality!
Postives -
- Feels good
- Looks good
- Fits with the free case
Negatives -
- Finger print magnet - seriously, had it on for a few minutes and it was covered.
- Still has the black border, so you DO still get a 3D effect where you're missing an (admittedly small) portion of your screen
- Hardest OP screen protector I've ever put on.
Let me know if you have any questions on it, and I'll endeavor to keep you all updated on how it functions!
Thanks!
^ Dang! I can't believe how difficult it was for him to remove the bubbles with that protector. And in the end it still had a bubble that kept returning. This sure did make me glad I opted not to pay extra for that tempered glass protector. It's almost as if it doesn't have strong enough adhesive.
Regardless, I plan on sticking with the pre-applied screen protector for a bit before making a decision on a glass protector. In fact, if the pre-applied protector holds up well, I may not ever bother taking it off. I must say that it would be really nice to finally get a phone and never even worry about spending money on a screen protector, or trying to perfectly apply one, for that matter.
I just hope my pre-applied protector isn't positioned too high, as the above video reviewer mentioned his was.
unfortunately my preapplied screen protector is a tiny bit too high for my taste too, so when swiping up with gestures enabled you can feel the slight edge :/
I really hope whitedome is going to bring a TGSP for the OP6 on the market
niijonodhg said:
Here take a look at this. I''ve just posted it to the official forums to I'll C+P here;
----
Hi all,
Hope you've not forgotten me! I'm back. I went down to the London launch as I was super excited to see the OnePlus 6 in person and I've now got my hands on the phone and the official tempered glass. So as I have done every year, I'm going to be testing out as many accessories that I can get my hands on, starting with the Official Tempered Glass Screen Protector!
Feel free to watch the video to get all this information, or just scroll down and read it if you prefer!
Some of you wonder why take of the pre-applied factory screen? Well for me, it's all about finding the best protection for your device and from experience the pre-applied screen is not that. It's a nice bonus, as if you're not buying the official you'll have to wait around a week or so before third party manufacturers get screens ready for sale. Mine was also riding slightly high on the screen, which meant using it whilst having gestures turned on was a bit of a nightmare.
As usual the screen protector, comes well packaged, with some excellent tools- most of which you won't need if you're taking the pre-applied screen off and then putting this one on straight away.
The screen protector as with the last few years comes on a single slab of plastic/glass, which you will need to be careful off when you're removing the screen protector from it. I've seen many people CRACK their screen protector at this point. Don't be that person! Go slow, but surely. And for goodness sake once you've peeled it off, don't turn it around and let all the dust particles in your house get on it!
The screen protector fits nicely on the phone and feels pretty decent. High quality!
Postives -
- Feels good
- Looks good
- Fits with the free case
Negatives -
- Finger print magnet - seriously, had it on for a few minutes and it was covered.
- Still has the black border, so you DO still get a 3D effect where you're missing an (admittedly small) portion of your screen
- Hardest OP screen protector I've ever put on.
Let me know if you have any questions on it, and I'll endeavor to keep you all updated on how it functions!
Thanks!
Click to expand...
Click to collapse
Thanks for this! Your videos are always great when it comes to these things. Keep up the great work!
Do you think the bit the pops up might simply be just because of the curvature of the screen towards the corner?
(curved screened phones are always a nightmare when it comes to putting screen protectors on). If the underside of the screen protector is curved aswell in order to fit the curved screen of the device, even a fraction of difference can cause these kinds of problems, whereas flat ones you can even get away with them positioned slightly off, and they will always sit down perfectly flat.
Can you confirm whether the curvature of the OnePlus 6's screen is just around the edges, or is it the whole of the front that is actually curved?
(If you see what I mean).
I could be wrong, but from what I can see on the video, it does almost look like it's the whole screen that is rounded and not just the edges (but it's hard to tell from a video, so can't know for sure)
sn0warmy said:
^ Dang! I can't believe how difficult it was for him to remove the bubbles with that protector. And in the end it still had a bubble that kept returning. This sure did make me glad I opted not to pay extra for that tempered glass protector. It's almost as if it doesn't have strong enough adhesive.
Regardless, I plan on sticking with the pre-applied screen protector for a bit before making a decision on a glass protector. In fact, if the pre-applied protector holds up well, I may not ever bother taking it off. I must say that it would be really nice to finally get a phone and never even worry about spending money on a screen protector, or trying to perfectly apply one, for that matter.
I just hope my pre-applied protector isn't positioned too high, as the above video reviewer mentioned his was.
Click to expand...
Click to collapse
My pre-applied protector only lasted an hour on mine. The edges don't stick enough to avoid random lint and dust from sliding just a bit underneath it. Also the swipe up gestures from the bottom of the phone feel weird as you bump the protector. I'm not sure but I think it's because the protector is a bit thick.
Sent from my ONEPLUS A6003 using Tapatalk
jlczl said:
My pre-applied protector only lasted an hour on mine. The edges don't stick enough to avoid random lint and dust from sliding just a bit underneath it. Also the swipe up gestures from the bottom of the phone feel weird as you bump the protector. I'm not sure but I think it's because the protector is a bit thick.
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
That’s a shame. My phone arrives today and we leave for Mexico tomorrow for a week. I was hoping the pre-applied protector would be perfect. The edges of it are probably going to look like garbage by the time we get back.
the protective film, can not attach clean and then Euro 22, so I can not recommend. Shade for the money
unix2208 said:
the protective film, can not attach clean and then Euro 22, so I can not recommend. Shade for the money
Click to expand...
Click to collapse
What?
I really like the TGP. It fits seamlessly with the nylon case where the edges go all the way to the case and it feels completely natural. I thought the black outlining would bother me, but it works really well with the phone. I highly recommend the OEM TGP. No issues with it being compatible with the bumper case.
I have read on a Dutch forum that there is only glue on the edges of the screen protector. The middle is coated with some sort of oil so you won't see any bubbles.
This would explain the YouTube video with the corner not sticking. Could somebody confirm this?
This is a problem with all "curved edge" phones. Really makes me wish Samsung did not have as much sway in the market as they do. We would still have flat screens!
JCreations said:
I have read on a Dutch forum that there is only glue on the edges of the screen protector. The middle is coated with some sort of oil so you won't see any bubbles.
This would explain the YouTube video with the corner not sticking. Could somebody confirm this?
Click to expand...
Click to collapse
Sent from my Pixel 2 using Tapatalk
suprstar29 said:
I really like the TGP. It fits seamlessly with the nylon case where the edges go all the way to the case and it feels completely natural. I thought the black outlining would bother me, but it works really well with the phone. I highly recommend the OEM TGP. No issues with it being compatible with the bumper case.
Click to expand...
Click to collapse
More importantly, how difficult was it to get a bubble free install?
JCreations said:
I have read on a Dutch forum that there is only glue on the edges of the screen protector. The middle is coated with some sort of oil so you won't see any bubbles.
This would explain the YouTube video with the corner not sticking. Could somebody confirm this?
Click to expand...
Click to collapse
The tempered glass screen protector from OnePlus has adhesive throughout the entire protector, not just around the sides. Watch an install video and you'll see.
sn0warmy said:
More importantly, how difficult was it to get a bubble free install?
Click to expand...
Click to collapse
It wasn't to bad. There were a couple of stubborn small bubbles, but it you press and hold on them for a second or two with the included tool they go right away. I have a completely bubble free TGP that took maybe 2 minutes to put on
suprstar29 said:
It wasn't to bad. There were a couple of stubborn small bubbles, but it you press and hold on them for a second or two with the included tool they go right away. I have a completely bubble free TGP that took maybe 2 minutes to put on
Click to expand...
Click to collapse
Well crap. Now I wish I went ahead and ordered the protector with the phone. Now I've got to get through a week in Mexico with the pre-applied protector and hope it doesn't peel up until I get back.
Ordering the TGSP from OnePlus right now. Thanks for your input.
Just installed it and it looks great in my opinion! Wasn't that hard. If you apply it with the included case on, it helps a ton with lining it up; you literally just need to drop it into place.
I did get a couple pieces of dust underneath but they are super small and hardly noticeable, so I don't want to risk lifting the protector to remove it (risking more dust to get under) (or risking losing adhesion).
It does have a bit of that "3D look" but I got used to it very quick and now I don't notice it.
If there is text way at the edge of the screen, it does slightly get cut off but luckily most apps/websites don't have text that close to the edge.
Overall it's a solid protector and I'm probably going to stick with it until the end of its life (unless it cracks or something of course lol).