Database Info

[Q] Problem Optimus 3D after upgrading to CyanogenMod !

Hello everyone! I state that is a month that I bought a LG Optimus 3D Gaming Edition and I have already made ​​many changes: root, recovery, rom modified, etc. ... The other day, after having installed the rom Cyanogenmd, I was presented with a problem, my terminal is not cycled more (I was calm at other times because I had already sbrikkare) ......... as usual ...... I turned on the pc plugged it into the terminal in debug mode ... I noticed that the connection between the terminal and the PC was not stable (ie it connected and disconnected at infinity)! Later I also discovered that the terminal is not recharged and even now no longer know what to do! Please help me I'm desperate!

is there anyone?

fabersantucci said:
is there anyone?
Click to expand...
Click to collapse
Gaming edition?
Sent from my LG-P925 using XDA Premium App

Did you brick your phone dose it turn on? dose it just loop in download mode? volume down and power. If it loops in download mode then you probly hard bricked it i did that and had to take it back no way to fix it.

Thank you. Anyway I think I hard bricked the LG, why not start their own, even in download mode.The last choice is to take it in assistance?
Sorry for my bad English, I'm using google translator !

If you go to the thrill 4g forum and go to general and then the thread free assistance a guy there can try to help you if he can then youll have to tak it back if you can.

Did you format the SD card when you were on CM7 ?

omgomg said:
Did you format the SD card when you were on CM7 ?
Click to expand...
Click to collapse
Ya i did that and hard brickdd my phone.

Hi all,
I too have done the same bull****. I formatted the SD and now the phone will not start: tried in recovery, in emergency, in normal mode, unfortunately there's no way to restart it.
Could you make a copy of your SD in RAW mode and try to give me the backup?
I extract the contents in my SD to try to start the phone.
Did you think that's possible?
Thanks

Just putt in your data cabel ond whait for the connecting sound. maybe putt itt in and out several times and the computer shall install the usb driver then run lg recovery tool. good luck sorry for my bad inglish

shtchalle said:
Just putt in your data cabel ond whait for the connecting sound. maybe putt itt in and out several times and the computer shall install the usb driver then run lg recovery tool. good luck sorry for my bad inglish
Click to expand...
Click to collapse
Thanks for reply.
I tried a lot of time on a lot of pc (windows xp, windows 7 32bit, windows 7 64 bit= without any fix.
I think the problem is due to the fact that the CM7 installs recovery, emergency mode, normal boot on SDCARD.
It's impossible to start the phone in any of the three options.
Just connect the smartphone on PC, the USB port continues to connect / disconnect (every second).
Probably with a raw image of the iso, maybe I can fix the issue, hoping that the required data are read from external memory and not form internal memory, also I have trouble: (

My phone was exactly like you're. Some how i started the phone in recovery mode butt screen is still black just a sound in computer and after several attempt computer install drivers and LG recovery tool worked. Hard to explain in words. Hope you fix it.

Help needed

hi have been trying to update to 4.0 via flash tool but ive tried everything and cannot get it to work......ive been trying for 3 days and ive pretty much had enough of trying on my own so i though id would ask for help.
ok firstly i am on gb 2.3 im running custom cm7 no probs but i wana take the next step 4.0 so....i have all lg flash tool etc and fast load etc all nessacary files needed but for some reason my phone wont connet and flash its doing my head in. i have it into download mode, battery out etc but after that nothing i cannot progress further its like the program wont connect/register the phone.
im running win7 i even looked into other post and thought this maybe the problem but i have already installed these when gone into download mode as said here If you plug your Phone on PC without battery, OMAP4430 device appeared for seconds and then disappeared in your Windows Device Manager
(check arsen4oo photo guide in post #3)
On windows 7 sometimes OMAP4430 flashes too fast so you cant install driver.
There is a a windows feature that will help you install the driver easier.
To view devices that were once installed but are no longer attached to the computer, open a Command Prompt window using the Run As Administrator option and enter the command:
SET DEVMGR_SHOW_NONPRESENT_DEVICES=1
Then, from the same command prompt, type devmgmt.msc to open Device Manager. Choose View, Show Hidden Devices. The new instance of Device Manager will show “ghosted” entries for devices that were once present. This technique is especially useful for fixing problems caused by leftover drivers after replacing a network card or video card—you can easily delete the ghosted device or update the OMAP4430 driver.e
i just dont know what im doing wrong
cheers in advance

HI,
Please uninstall all LG drivers, and start again. If you are using WIN7, run it with WINXP SP3 compatibility mode.
Getting the Software upgrade screen is tricky, the timing needs ti be just right for the screen to stay, else it blinks and the OMAPP difficulty starts.
You need to listed to the connect disconnect sounds carefully.
Its not difficult, just that the timing needs to be right for the battery to be inserted.
all the best
schubeir

schubeir said:
HI,
Please uninstall all LG drivers, and start again. If you are using WIN7, run it with WINXP SP3 compatibility mode.
Getting the Software upgrade screen is tricky, the timing needs ti be just right for the screen to stay, else it blinks and the OMAPP difficulty starts.
You need to listed to the connect disconnect sounds carefully.
Its not difficult, just that the timing needs to be right for the battery to be inserted.
all the best
schubeir
Click to expand...
Click to collapse
ok so i unistalled all drivers etc done as said but im still doing something wrong.....
1.i have batt out connect phone wait few seconds for it to connect hear a sound connection keep held down till also hear another connection to say all connected etc.(the drivers have installed etc)
2.the screen is blank still battery is out
3.i have installed omap flash, lg flash tool and lg smart flash tool and fastboot and i can get any to work with phone
4.now there is no software update on screen even if i put battery back in phone just stay blank
so thats were i get to so lost.....
cheers in advance

And in FLASH TOOL TUTORIAL there is illustrations of a cable broken down etc do I have to do this to get into download mode and what acctual flash tool do I need to use because there is a few out but tried most but don't work with mine is it to dowith cable? And I have brought new cables etc just in case cheers in advance

Another stupid question but it shouldn't have anything to do with my phone having being rooted and not runngin LG software......I'm so confused with it all as I have tried everything and if it don't work phone can go to someone else lol cheers again

matt2098 said:
Another stupid question but it shouldn't have anything to do with my phone having being rooted and not runngin LG software......I'm so confused with it all as I have tried everything and if it don't work phone can go to someone else lol cheers again
Click to expand...
Click to collapse
Make sure all the drivers from the guide are installed. (including omap driver)
Load the DLL and the rom to lg flashtool.
Listen to the port with LG flashtool's port settings. (One is enough , The icon with a printer cable that's the port settings)
Take the battery out but be ready to plug it back in.
connect the usb cable.
Hold volume up
You're gonna hear sounds from windows in this order ;
1.Connected
2. Disconnected
3. Connected (Again , when you hear this plug the battery back in)
If you did it right then you're now in download mode.
Go to the device manager , find the LG device (I don't remember the name , but there is only one so you'll see it.) and go to properties , advanced and port settings.
Change the port to com41.
Flashtool should take over and start.
For extra guidance , see xbsall's thread ;
http://forum.xda-developers.com/showthread.php?t=1942836

To enter download mode .
Your phone in your hands without anything :-
1- Pull out battery .
2- hold vol+ and keep holding .
3- Connect your phone and you are still holding....
4- Now the phone is connected and you are holding vol+ . Insert battery and keep holding for about 3 seconds . Now the phone in download mode (there are some korean words on the screen) .
That's all
Good Luck
Sent From My P920 (ICS ported)
Hit Thanks Button If I Helped

ok i bloody given up going to use it as a bloody paper weight doing my head in.....no matter what i do i cannot get up software screen in download mode??? i do exactly as stated and still it doesn't want to do it every time blank screen phone will not power on.
with battery in screen blank went through listerning to conect disconnect connect etc do as descriped and now phone is connectected with blank screen as stated i know its connected installed everything.
cheers for the help

http://www.youtube.com/watch?v=zrkHry0gRZw this is excatly what im doing and nothing......

When you're online pm me when you can be online tomorrow.
Sent from my LG-P920 using xda app-developers app

Read the #3 post in this thread :-
http://forum.xda-developers.com/showthread.php?t=1942836
Maybe it will help .
Sent From My P920 (ICS ported)
Hit Thanks Button If I Helped

and works it
mayby this help
http://lg-usb-modem-driver.soft32.com/free-download?rel=center
good luck

ok so further update i can get it into fastboot which has a small lg symbol and says fastboot at the top but still no Korean writing software upgrade screen and in device manager i have lg cosmo come up now. It doesn't have LGE CDMA USB SERIAL PORT this up any more, ive insalled all new driver the lot everything prgressed a little further but stuck again lol cheers for the help so far

u want to flash ported ics im right?
Sent from my LG-P920 using xda app-developers app

OIKk finnally im on software download screen YAY!!!!!!!!!!! but flash tool keeps saying fail and at the top were is says model its say su660 not p920???? which i now have managed to sort so i press start and its says ready and nothing............hasnt done much phone pwers off then back to the begin again cheers again

Because you're flashing the baseband before you flash the ROM. Change the sequence , ROM first then baseband. (Just remove the baseband you added on the flash tool ".fls file" then add it again it's gonna be flashed after the ROM )
Edit : I can help via team viewer if you want.
Sent from my LG-P920 using xda app-developers app

if u read this u should know that u neednt fastboot to flash this ported ics and have to flash bin file first then fls file
and at the thread of first ported ics from xbsa tell u everthing what u use to know to flash this rom
http://forum.xda-developers.com/showthread.php?p=17177547
2nd post is in english
Sent from my LG-P920 using xda app-developers app

its all son confusing as there is so many different guides tutorals etc the only way i can get in software mode is by fast boot i can progress further to here but now im stuck tottaly lol its gets to 27% and stops because of a omap fail???

and all the time ive only been tryig to insatll the rom bin file as of present....not the fls so im now up to here and dont have clue with team viewer lol

Look at your pm
Sent from my LG-P920 using xda app-developers app

[Q] Problem with Star A2000

Got a (china) Star A2000. Work ok for a week or two. Have it rooted. Hit the factory reset and now it comes on, but with a picture of andriod saying touch. It reconizes the touch, but thats it. Trying to flash but can't make it work on PC(XP Pro SerPac 3). Can't seem to find anything to make a sd card work. I 7Zip files but phone dosn't do anything with it. I'm pretty sure I'm missing something stupid. Can anyone help???? Really trying to learn andiod, I love this stuff. forgot I don't have a sim card in it yet. do I have to have it for android to work, cause it worked like that when I first got it.

Try to flash a stock rom in recovery since you are rooted...
sent from the super siii mini GT-I8190 using xda premium app.

Flashing Star A2000 phone
Hello friend,you have to use the software SP_Flash_Tool_v1.1110.00 HEREat your computer to flash this phone... Also you need the USB driversHERE for this phone...
You need the phone ROM software for your Star A2000 HERE After downloading this ROM you have to extract it at your PC.Then you have install the drivers when you plug your phone cable to your pc.After that you have to open this SP Flash Tools and click Scatter Loading and locate the extracted ROM Folder and choose Android_scatter.txt After that remove all the "tix" and leave only Android (system.img)to be checked.After that turn your phone off and when you plug the phone cable to your pc you have to press F9 on the computer when this SP_tools is at your active window on your desktop.If everything is fine you have to see in yellow % moving from 0 to 100 %.If not you are not installed usb drivers or the usb com port is different.Try from another usb plug... If you see 100% and then OK and green cirle the phone is flashed.Power on your phone and leave it maybe 10 min. to loading.Hope you understand my bad English.

[Q] LG optimus 3d p925g bricked

I've looked at the similar threads , to be honest even if one of the suggestions might work , none of the people seem to have the same problem from my understanding.
So apologize ahead of time as i imagine someone has bricked in a similar fashion in some thread buried somewhere.
But have an unlocked P925g lg optimus 3d, got a few days ago.
Last night i rooted just fine , root checker says it was rooted properly.
Then i installed rom manager as i was following manbearpigs post.
When i got to flash clockwork mod , i clicked the button and it looked like it was doing some flashing , but the phone turned off to reboot??
and now when i power on the lg logo appears and then the screen goes funny.
If i try to hold the power down and 3d button , i get a green screen . However i'm very unsure of what to do next.
However when i plug into usb the phone goes black , refuses to turn back on until i take the battery out.
I'd pay someone here if i could , but i'll take any help i can get.
Appreciate any help.

I don't KNOW, but just an idea:
May be your phone is stuck in download mode?
With this latest ICS (original, not ported) my phone shows black screen when in download mode (no message SW UPDATE and something in Korean).
Did you try to plug your phone to PC? Does your comp see it?
From what I read flashing wrong CWM might cause problems...
Also try to read Ressurection thread by xbsa, it helped me couple times
Don't give up!
Sent from my LG-P920 using xda app-developers app

My computer does see the phone if i take the battery out , and push the volume down while it connects. However when it connects , it cannot find drivers that it find originally.
I'd be happy just to have the phone back to froyo right now , however i am not giving up , just asking for advice. Will reply once i look at the resurrection post you suggested.

odanhammer said:
My computer does see the phone if i take the battery out , and push the volume down while it connects. However when it connects , it cannot find drivers that it find originally.
I'd be happy just to have the phone back to froyo right now , however i am not giving up , just asking for advice. Will reply once i look at the resurrection post you suggested.
Click to expand...
Click to collapse
just try the LG flash tool to flash without reinstalling drivers, if it doesn't flash you have to uninstall all LG drivers, reboot your computer, install again LG drivers and flash Bin files using Flash tool, you don't have to flash Bin and fls files at the same time, first Bin file, if there is no network close LG flash, open it again and flash Fls at second time to get the right baseband (sometimes it not necessery to flash this fls files)
or just follow this guide
http://www.technopat.net/forum/android-telefonlari/9128-lg-optimus-3d-ultimate-flash-guide.html

odanhammer said:
My computer does see the phone if i take the battery out , and push the volume down while it connects. However when it connects , it cannot find drivers that it find originally.
I'd be happy just to have the phone back to froyo right now , however i am not giving up , just asking for advice. Will reply once i look at the resurrection post you suggested.
Click to expand...
Click to collapse
To get to download mode you need to keep battery in, remove sim and SD card. Hold vol+ and plug USB cable. You should see message SW UPDATE and some Korean. My phone now doesn't show it, just blank screen. But LG Flash sees it and u can flash bin fls.
Sent from my LG-P920 using xda app-developers app

Remove drivers and use the LGMobile Support Tool to install the drivers, if your phone is connected it should detect it and finish the install process. I believe the P925G is a Rogers device? You might have to select Rogers as your carrier to find the drivers.

Android1993 said:
Remove drivers and use the LGMobile Support Tool to install the drivers, if your phone is connected it should detect it and finish the install process. I believe the P925G is a Rogers device? You might have to select Rogers as your carrier to find the drivers.
Click to expand...
Click to collapse
ok so i've deleted all lg related material from my computer, when i connected the phone to the computer with battery in , nothing happens.
Without battery , it detects automatically , then it continues a loop of picking it up and dropping off .
So i moved to my laptop , attempted to follow the guide kupuku posted, however after getting the went logo on the phone , it never gets past that stage no matter what i do.
I've also tried LG support tool , it doesn't detect my phone on either my computer or laptop , even after installing/reinstalling the proper drivers.
LG does have a live chat which isn't open and the phone number can not be reached from my area.. i imagine its a 1800 number for asia or something as i do live in Canada.
My only other choice is to take the phone down to a guy that can get it out of boot loop for close to what i paided for the phone a few days ago.
Least to say , that option is something i want to do , nor can i afford to do.
once again i apprecaite the help that has been given , and for any that will be given.
edit:
Ok so i got lg mobile support to work by doing recovery and entering my imei number. Its currently at 4% but its been close to an hour and a half. Might restart and see if that works , but my phone is doing the logo boot repeat pattern still , even during this update. so not sure what exactly is happening.

SONY XPERIA Z3 fatal problem !! HELP ME !!

Hello people , I have a huge problem , I hope someone of you can help , in fact I have a Sony XPERIA Z3 . Today, after a rather silly procedure attempting to install CM 12 I accidentally wiped the entire partition of the device , and the device can not even turn over , and we PC does not recognize the device when you connect to a PC , although I installed all drivers and cell phone is properly dealt with these drivers before this accident , going to the service is not an option , please save me thanks

TomiZD said:
Hello people , I have a huge problem , I hope someone of you can help , in fact I have a Sony XPERIA Z3 . Today, after a rather silly procedure attempting to install CM 12 I accidentally wiped the entire partition of the device , and the device can not even turn over , and we PC does not recognize the device when you connect to a PC , although I installed all drivers and cell phone is properly dealt with these drivers before this accident , going to the service is not an option , please save me thanks
Click to expand...
Click to collapse
The main problem is that device do not show that Is even charging when is connected to power.........

This morning when I plugged a mobile phone to a PC red LED turned on or after that absolutely nothing , I was unable to launch mobile phone in the FlashBoot mode , please help

TomiZD said:
This morning when I plugged a mobile phone to a PC red LED turned on or after that absolutely nothing , I was unable to launch mobile phone in the FlashBoot mode , please help
Click to expand...
Click to collapse
Did you try flashtool??

titijuli said:
Did you try flashtool??
Click to expand...
Click to collapse
Hmm but how ? When windows dont see phone on usb when I connect it ?

but, did you try?
also there is a yellow button in the right tap, pressing it for 120 seconds resets the phone, but don't think it can be useful for you at the moment...

titijuli said:
but, did you try?
also there is a yellow button in the right tap, pressing it for 120 seconds resets the phone, but don't think it can be useful for you at the moment...
Click to expand...
Click to collapse
Hmmm yes I did try it, but nothing happened, is there any way to flash it somehow even the phone can not turn on?