Database Info

[Q] Returning to stock [i9020a]

I just wanted to make sure that I understood the process of returning my phone to stock before I make a mistake.
All I've done since I purchased the phone was root it and unlock the bootloader. I have not loaded any custom roms.
So If I understand this correctly I need to:
1) Flash the Stock Image (which should include the stock recovery?)
2) Use fastboot to lock the bootloader
The reason I'm wanting to return the phone to stock is to receive OTA updates. I never use any apps requiring root, and don't plan on loading any custom roms.
I never did find a 2.3.4 stock image for the I9020A..

you should actually be able to get ota updates no problem. it'll just remove root every time you update.
it's probably not a good idea to lock the bootloader though cause if you ever want to unlock it again in the future you'll have to wipe everything from your phone. your best bet is to just flash stock recovery so you can install the update
i'm pretty sure that works, but hopefully someone else can verify just so you don't get some bad information lol

I heard the same thing about OTA updates. If you're phone is rooted and you're using the original rom, you'll get the update but you'll have to root your phone once again.
I haven't tried this myself so I cannot verify it.
It's just the word on the street, you know!

EraqEE said:
I heard the same thing about OTA updates. If you're phone is rooted and you're using the original rom, you'll get the update but you'll have to root your phone once again.
I haven't tried this myself so I cannot verify it.
It's just the word on the street, you know!
Click to expand...
Click to collapse
you need stock everything, so stock kernel, rom, radio, etc... the op should be fine to update if they flash stock recovery though. rooting is simple from there

dmuntean said:
I just wanted to make sure that I understood the process of returning my phone to stock before I make a mistake.
All I've done since I purchased the phone was root it and unlock the bootloader. I have not loaded any custom roms.
So If I understand this correctly I need to:
1) Flash the Stock Image (which should include the stock recovery?)
2) Use fastboot to lock the bootloader
The reason I'm wanting to return the phone to stock is to receive OTA updates. I never use any apps requiring root, and don't plan on loading any custom roms.
I never did find a 2.3.4 stock image for the I9020A..
Click to expand...
Click to collapse
where can i find a method to return a phone thats unlocked and rooted? any help would be appreciated.
Sent from my Inspire 3G.

bdpyo said:
where can i find a method to return a phone thats unlocked and rooted? any help would be appreciated.
Sent from my Inspire 3G.
Click to expand...
Click to collapse
I would like to do the same, I have a Fido/ATT I9020A and I'm having a hard time finding a stock nandroid backup to restore my phone with...
Anyone?>

bump
Sent from my Inspire 3G.

Here is stock 2.3.4 (GRJ22) with UCKD1 Radio & KA3 Bootloader.. http://dl.dropbox.com/u/7812800/Stock-GRJ22-i9020A-unsigned.zip Flash via ClockworkMod Recovery (due to it being unsigned zip)
I extracted and packaged it from my i9020a (and tested it on there).

how do you recomend flashing?
Sent from my Inspire 3G.

bdpyo said:
how do you recomend flashing?
Sent from my Inspire 3G.
Click to expand...
Click to collapse
Sorry forgot to add that to post... since its unsigned you need to flash via ClockworkMod Recovery.

kibmcz said:
Sorry forgot to add that to post... since its unsigned you need to flash via ClockworkMod Recovery.
Click to expand...
Click to collapse
Thanks kibmcz ! I'm a n00b when it comes to this but when you say flash via ClockworkMod you mean get into clockwork recovery mount the usb, transfer the zip onto the SD card and then <<Install from zip>> ?
Is that the method?

davis2k said:
Thanks kibmcz ! I'm a n00b when it comes to this but when you say flash via ClockworkMod you mean get into clockwork recovery mount the usb, transfer the zip onto the SD card and then <<Install from zip>> ?
Is that the method?
Click to expand...
Click to collapse
Yep that method works

kibmcz said:
Yep that method works
Click to expand...
Click to collapse
Thanks again kibmcz, so I just completed the flash, then did a fastbook oem lock.
Seems to be working fine except for one thing...
When I go into settings and hit Sound I get a Force close when I try and select a new ringtone...
Should I try reflashing again?

davis2k said:
Thanks again kibmcz, so I just completed the flash, then did a fastbook oem lock.
Seems to be working fine except for one thing...
When I go into settings and hit Sound I get a Force close when I try and select a new ringtone...
Should I try reflashing again?
Click to expand...
Click to collapse
Didn't happen on mine (In fact im using a self rooted rom based on that exact stock zip) try doing a wipe in stock recovery.

after flashing that does it take it back to out of box condition?
reason i ask is because i bought a already rooted and unlocked one here from market place and i want to return it to stock firmware, radio, kernel and such to recieve OTA updates and what not.
your info is greatly appreciated
Sent from my Inspire 3G.

bdpyo said:
after flashing that does it take it back to out of box condition?
reason i ask is because i bought a already rooted and unlocked one here from market place and i want to return it to stock firmware, radio, kernel and such to recieve OTA updates and what not.
your info is greatly appreciated
Sent from my Inspire 3G.
Click to expand...
Click to collapse
Using my zip yes... it flashes Bootloader, Radio, Boot, System and on first boot (and any other time recovery changes) Recovery is flashed. All you got to to is lock the bootloader and that wipes user data and usb storage.

hey man i appreciate you coming forward with a solution, ive yet to recieve the phone but wanted to prepare.
my goal is to flash everything back to stock and start completly over whereas i have no clue what method was originally used to root and unlock the bootloader.
when the time comes hope you dont mind a PM if i have any extra questions.
Sent from my Inspire 3G.

Just did the method using the stock ROM provided by kibmcz "thanks BTW!"
Phone is back to stock, working like it did when I first bought it. Had a little trouble with some Force Close issues but did a factory reset/data clear of the cache and all that before re-flashing, and it seems to be working Vanilla!

bdpyo said:
hey man i appreciate you coming forward with a solution, ive yet to recieve the phone but wanted to prepare.
my goal is to flash everything back to stock and start completly over whereas i have no clue what method was originally used to root and unlock the bootloader.
when the time comes hope you dont mind a PM if i have any extra questions.
Sent from my Inspire 3G.
Click to expand...
Click to collapse
Great and thanks DM all you want i don't mind. Oh and i now got stock 2.3.6 (GRK39F) uploaded.
Code:
[B][URL="http://dl.dropbox.com/u/7812800/Stock-GRK39F-I9020a-unsigned.zip"][B]Android 2.3.6/GRK39F/UCKF1 Radio/KA3 Bootloader[/B][/URL][/B]
Works on: I9020A
Unofficial, unsigned, must flash through ClockworkMod Recovery. Contains recovery, radio and bootloader.

kibmcz said:
Great and thanks DM all you want i don't mind. Oh and i now got stock 2.3.6 (GRK39F) uploaded.
Code:
[B][URL="http://dl.dropbox.com/u/7812800/Stock-GRK39F-I9020a-unsigned.zip"][B]Android 2.3.6/GRK39F/UCKF1 Radio/KA3 Bootloader[/B][/URL][/B]
Works on: I9020A
Unofficial, unsigned, must flash through ClockworkMod Recovery. Contains recovery, radio and bootloader.
Click to expand...
Click to collapse
So all I have done to my nexus s is root and cwm and kernel. I can do the ota to 2.3.6 or flash your package?
Running build GTJ61 and I9020AUCKE1 2.3.4 stock.
Sent from my Nexus S using xda premium

2.3.6 update question

I know if I update i'll lose my root but what i'm not sure of is whether I'll lose my apps and game progress/saves etc.
Does anyone know?
Thanks

You won't lose any data or game progresses.
Sent from my Nexus S using Tapatalk

Just got the OTA today, installed and running....I didn't lose the root. Everything else stays the same.

vennstrom said:
Just got the OTA today, installed and running....I didn't lose the root. Everything else stays the same.
Click to expand...
Click to collapse
Really? When I updated from 2.3.2 to 2.3.4 I lost root so I assumed this would occur again (for the OTA update).

vennstrom said:
Just got the OTA today, installed and running....I didn't lose the root. Everything else stays the same.
Click to expand...
Click to collapse
You lost root. You need to flash superuser again.
Sent from my Nexus S 4G using xda premium

yup...my bad, didn't check properly. I assumed it was not just by looking at superuser without trying.
Update: Rooted again now ^_^

vennstrom said:
yup...my bad, didn't check properly. I assumed it was not just by looking at superuser without trying.
Update: Rooted again now ^_^
Click to expand...
Click to collapse
How did you rooted again? Just flash the su.zip?

Hey guys I have a question.
I received my ota update today. It says that it's downloaded and ready to install on reboot. However I want to save the update prior to this. Where is it located on the phone? Reason being that I have a custom kernel installed and I want to 1) revert to my stock 2.3.4 nand backup 2) install 2.3.6 update 3) root again 4) make a stock 2.3.6 nand backup 5) install custom kernel again and see if it works
I already tried searching with astro on / for update,aosp, 2.3.6 but so far no hits..

alexxdj said:
How did you rooted again? Just flash the su.zip?
Click to expand...
Click to collapse
So I can DL the official OTA update and just flash the su.zip? Where to I download the appropriate su.zip file?

dccxviii said:
So I can DL the official OTA update and just flash the su.zip? Where to I download the appropriate su.zip file?
Click to expand...
Click to collapse
alexxdj said:
How did you rooted again? Just flash the su.zip?
Click to expand...
Click to collapse
Just flash the su from CWR
I got it from here: http://forum.xda-developers.com/showpost.php?p=17033340&postcount=819
Version 3 in the market is not stable according to some user

Gain root access on the latest 1.55.531.3 update, ONLY IF you are S-OFF

I found out that it is possible to gain root access in an 'unrootable' update, IF you are S-OFF, by flashing ClockworkMod thru the bootloader, and then flashing Superuser thru ClockworkMod. I found out that this worked on the G2, as described here by rdmerck:
http://forum.xda-developers.com/showthread.php?t=1206930
So all i did was replace the android_info.txt and the recovery.img in his zip, with the ones for our device. I just tried it, and it worked! i have Superuser access in the new 1.55.531.3 ROM.
INSTRUCTIONS:
Pretty simple...
1. Download the 2 attached files, put them both on the root of your sdcard, and rename the CWM_HBOOT.zip to PG59IMG.zip.
2. Boot into the bootloader however you prefer, let it read the PG59IMG.zip, and press volume up to update when prompted. When it finishes, it will prompt you to press Power to reboot.
3. Now boot into recovery however you prefer, and it should be ClockworkMod(I used the Modaco 4.0.0.9 version, basically because i had it conveniently lying around in .img format. I'm sure Rom Manager could now be used to flash the latest 5.0.2.7 version of CWM). Choose 'install from sdcard', then 'choose zip from sdcard', then choose the Superuser-3.0.7-efgh-signed.zip and choose 'yes'. As has happened in the past, i had to flash it 3 times until it successfully installed. But it did work.
4. Choose to reboot, and enjoy root access on the latest stock ROM!
I figure a lot of people probably won't need all that instruction, but i included it for people who are newer to flashing stuff thru the HBOOT and CWM. I also figure that the user base for this will probably be very small, as most folks who are S-OFF probably are not choosing to run the stock ROM. But anyway, if you DO have S-OFF, i wanted you to know that you can have root access on the latest update. I figure this will also enable us to make nandroid images of the new ROM, if that would help development at all.
Anyway, here are the 2 files:
ClockworkMod: http://dl.dropbox.com/u/18474790/CWM_HBOOT.zip
Superuser: http://dl.dropbox.com/u/18474790/Superuser-3.0.7-efgh-signed.zip
Note:
-This worked for me and should work for you, but use at your own risk.
-You must be S-OFF to do this.
-Hopefully this is only a temporary solution for those with S-OFF, until either Team Revolutionary cracks the update, or HTCDEV fixes whatever is preventing their bootloader unlocker tool from working on our device.

Using HTC Supertools v3 Will Temp(Prep)Root, get S-Off.
Sent from my ICS Splashed using Tapatalk

Litesorrows said:
Using HTC Supertools v3 Will Temp(Prep)Root, get S-Off.
Sent from my ICS Splashed using Tapatalk
Click to expand...
Click to collapse
is that right? is that a new development? and it works on the new update? if so, that's awesome.

yogi2010 said:
is that right? is that a new development? and it works on the new update? if so, that's awesome.
Click to expand...
Click to collapse
HTC Supertools has been out for a while. IDK, I got S-Off and Root on my Brothers DS. I got S-Off first, then ran the root exploit.
Sent from my ICS Splashed using Tapatalk

Great work, Yogi. Worked beautifully!

HebrewToYou said:
Great work, Yogi. Worked beautifully!
Click to expand...
Click to collapse
Awesome. My thanks go to rdmerck for the idea!

Nice bro! I may put this in Mr Root as another way to Root

xmc wildchild22 said:
Nice bro! I may put this in Mr Root as another way to Root
Click to expand...
Click to collapse
Yeah man, sounds good. I mean, perhaps this will be helpful to at least a few people, lol. It's an interesting and very simple idea tho... probably useful mainly on stock HBOOTs where fastboot is blocked, but S-OFF had been attained.

Litesorrows said:
HTC Supertools has been out for a while. IDK, I got S-Off and Root on my Brothers DS. I got S-Off first, then ran the root exploit.
Sent from my ICS Splashed using Tapatalk
Click to expand...
Click to collapse
Will it work on a updated mt4gs which hasnet obtained s off?
sent from my ice cream sandwhich MT4GS

Guess I will give this a shot later today.

how do i upgrade to the latest OTA if i'm already on a rooted stock ROM?

psychedel!k said:
how do i upgrade to the latest OTA if i'm already on a rooted stock ROM?
Click to expand...
Click to collapse
Well, since nobody has made a custom rom with the latest OTA bits, you will have to do what I did:
You'll need to downgrade yourself with the stock PG59IMG.zip, putting that file (found here) on the root of your sdcard and booting into the bootloader.
That will basically return your phone to stock and, IIRC, revert your status to S-OFF Locked. Then you'll need to boot up and check for system updates. You'll definitely be given the first small OTA update, but you very likely wont receive the latest OTA update via system updates.
For that you'll need to download it (from here) and flash it through the stock recovery. Once you've done that you can use the instructions in this thread to re-flash clockworkmod recovery and re-root.
Your phone will still be S-OFF but you'll have a locked bootloader.

Still can't figure out what I need to do to root my phone. That's on hboot 1.45.0013
Guess I might have to wait til Revo find a fix for it.

Hotshot205 said:
Still can't figure out what I need to do to root my phone. That's on hboot 1.45.0013
Guess I might have to wait til Revo find a fix for it.
Click to expand...
Click to collapse
Are you s-off?

No my phone is not
Sent from my myTouch_4G_Slide using Tapatalk

HebrewToYou said:
Your phone will still be S-OFF but you'll have a locked bootloader.
Click to expand...
Click to collapse
so does that mean i won't be able to restore a custom rom image?

psychedel!k said:
so does that mean i won't be able to restore a custom rom image?
Click to expand...
Click to collapse
Since you're S-OFF, you could flash ClockworkMod on the update and then flash a custom ROM, but I believe that would leave you with an old ROM and the new radio, which seems to have caused issues for people. Since there aren't yet any custom ROMs based on the latest update, you should probably stay where you are if you want a custom ROM. But if you do install the update, you would still be able to downgrade and get back to where you are now.

Wonder how long it will/could be before revo crack the current HBOOT
Sent from my myTouch_4G_Slide using Tapatalk

psychedel!k said:
how do i upgrade to the latest OTA if i'm already on a rooted stock ROM?
Click to expand...
Click to collapse
You could run this ROM, which is based on the latest OTA release from HTC, so no OTA updates are needed. It is optimized, deodexed, and tweaked just a tad. I use it as my daily driver with great success. http://rootzwiki.com/topic/12063-devrom12192011-stock-12853110-r2-deodexed-crtgpu/

Fuzi0719 said:
You could run this ROM, which is based on the latest OTA release from HTC, so no OTA updates are needed. It is optimized, deodexed, and tweaked just a tad. I use it as my daily driver with great success. http://rootzwiki.com/topic/12063-devrom12192011-stock-12853110-r2-deodexed-crtgpu/
Click to expand...
Click to collapse
I think possibly we've been thru this before, lol, but that ROM isn't the very latest... there has been a pretty big update since then that thus far is only available as an official OTA update package.

Samsung Infuse 2.3.6 Clockworkrecovery not working

Okay so ive follwed the steps and when i get to the recovery mode it just says error in update zip or something ? idk what else to do help please .

Ashialeigh said:
Okay so ive follwed the steps and when i get to the recovery mode it just says error in update zip or something ? idk what else to do help please .
Click to expand...
Click to collapse
Which method are you using to get root and CWM recovery? It sounds like you are trying to use the old method of installing the modified 3e recovery and then using an update.zip. There is an updated way to do this with AT&T 2.3.6, and the old way doesn't quite work the same anymore. Let me know which method you're trying so I know where to direct you from there.
EDIT: Since I'm pretty sure that you are using the old method from stock Froyo to get root and CWM recovery, take a look at this thread. It's a how-to that explains most of the ways to get root and CWM recovery on 2.3.6.:
http://forum.xda-developers.com/showthread.php?p=24935969

jscott30 said:
Which method are you using to get root and CWM recovery? It sounds like you are trying to use the old method of installing the modified 3e recovery and then using an update.zip. There is an updated way to do this with AT&T 2.3.6, and the old way doesn't quite work the same anymore. Let me know which method you're trying so I know where to direct you from there.
EDIT: Since I'm pretty sure that you are using the old method from stock Froyo to get root and CWM recovery, take a look at this thread. It's a how-to that explains most of the ways to get root and CWM recovery on 2.3.6.:
http://forum.xda-developers.com/showthread.php?p=24935969
Click to expand...
Click to collapse
idk i just looked at a youtube video i already rooted it . but i geuss its old .. but its like no matter what i do that update zip thing wont go away

Ashialeigh said:
idk i just looked at a youtube video i already rooted it . but i geuss its old .. but its like no matter what i do that update zip thing wont go away
Click to expand...
Click to collapse
It sounds like the old way using an update.zip. In Froyo, we used to replace the stock recovery with a 3e recovery that would allow unsigned files to be flashed. Then we'd flash an update.zip that contained CWM recovery. Just curious, how did you root, and is this AT&T Gingerbread?
I'd read through that how-to thread I posted. If you can use Heimdall or Odin, there are some quick ways to get CWM recovery. In that thread, I've also outlined how to do it yourself on stock 2.3.6.

jscott30 said:
It sounds like the old way using an update.zip. In Froyo, we used to replace the stock recovery with a 3e recovery that would allow unsigned files to be flashed. Then we'd flash an update.zip that contained CWM recovery. Just curious, how did you root, and is this AT&T Gingerbread?
I'd read through that how-to thread I posted. If you can use Heimdall or Odin, there are some quick ways to get CWM recovery. In that thread, I've also outlined how to do it yourself on stock 2.3.6.
Click to expand...
Click to collapse
Gingerbread.. and which one would you do for downloading custom roms,?

Ashialeigh said:
Gingerbread.. and which one would you do for downloading custom roms,?
Click to expand...
Click to collapse
To get Gingerbread with CWM recovery for flashing roms, you could flash Option C or Option D from here:
http://forum.xda-developers.com/showthread.php?t=1613523
Or, if you prefer Heimdall, qkster has some nice one-click packages. There are links for those in the first thread I gave you.
If you already have root (How did you root, again?), then you could just flash one of the Gingerbread kernel / CWM recovery packages from here.:
http://forum.xda-developers.com/showthread.php?t=1698367

jscott30 said:
To get Gingerbread with CWM recovery for flashing roms, you could flash Option C or Option D from here:
http://forum.xda-developers.com/showthread.php?t=1613523
Or, if you prefer Heimdall, qkster has some nice one-click packages. There are links for those in the first thread I gave you.
If you already have root (How did you root, again?), then you could just flash one of the Gingerbread kernel / CWM recovery packages from here.:
http://forum.xda-developers.com/showthread.php?t=1698367
Click to expand...
Click to collapse
idk i downloaded some prgram and clicked root .. so which link do i use to bee abke to get clock work recovery to be able to install diffent roms.

Ashialeigh said:
idk i downloaded some prgram and clicked root .. so which link do i use to bee abke to get clock work recovery to be able to install diffent roms.
Click to expand...
Click to collapse
Before you go any further, we need to investigate something. First, let's confirm that you are on AT&T 2.3.6, because most of us haven't found or made a working one-click program to root stock 2.3.6 directly. Can you go to Settings / About Phone and tell me what is listed under "Baseband version"?
If you can do that to confirm that this is AT&T 2.3.6, I'd really like to know what program you used. Or did you root the phone before you were on Gingerbread?
Any of those links that I've given you in the last post will give you CWM (clockwork) recovery to install different roms. An easy way would be to do Option C or Option D at this one. Either one will do. Here's the link again.:
http://forum.xda-developers.com/showthread.php?t=1613523

jscott30 said:
Before you go any further, we need to investigate something. First, let's confirm that you are on AT&T 2.3.6, because most of us haven't found or made a working one-click program to root stock 2.3.6 directly. Can you go to Settings / About Phone and tell me what is listed under "Baseband version"?
If you can do that to confirm that this is AT&T 2.3.6, I'd really like to know what program you used. Or did you root the phone before you were on Gingerbread?
Any of those links that I've given you in the last post will give you CWM (clockwork) recovery to install different roms. An easy way would be to do Option C or Option D at this one. Either one will do. Here's the link again.:
http://forum.xda-developers.com/showthread.php?t=1613523
Click to expand...
Click to collapse
says i997uclb3 and thanks

Ashialeigh said:
says i997uclb3 and thanks
Click to expand...
Click to collapse
Okay, cool. You're definitely on AT&T Gingerbread. If you figure out how you rooted, let us know. If you flash Option C or Option D at the last link I gave you - again - then you'll be able to flash other roms.

Okay !! Thats So Much !! ))

How to upgrade to new latest Asus firmware through custom recovery

Check the device firmware type by going to Setting - about tablet - built number
Download the right firmware pack for your device.
http://www.asus.com/Tablet/Transformer_Pad/ASUS_Transformer_Pad_Infinity_TF700T/#download
Now extract the zip file and you will have another zip file.
Rename that zip file as "EP201_768_SDUPDATE" and place it to an external sd card if you do not have a custom recovery. If you are rooted and unlocked plus you have a custom recovery you don't need to rename it you can place it in internal sd is well.
Now turn off your device. Hold power button including the volume down button and enter custom recovery. For stock recovery it should detect it automatically and will install. once in custom recovery clear your cache and install the file with the name above or whatever name you have. once installation is complete. reboot the system be patient and you have the latest update.
You can obtain root easily using this method.
Just download the DebugfsRoot_Generic_v2.3.zip file from here
http://forum.xda-developers.com/show....php?t=1706588
extract the content and run RootDebugfs, then follow the on screen instruction and you will have root.
Make sure you have USB debugging on.
To get custom recovery. Download goomanager from playstore and you can install TWRP recovery from the option list. which is Option - install OpenRecoveryScript.
I am not responsible if you mess up your device. do these at your own risk. Nonetheless these steps work perfectly for me.

Renaming is not needed.

lafester said:
Renaming is not needed.
Click to expand...
Click to collapse
Exactly thats for people without custom recovery

Isn't this already covered here? http://forum.xda-developers.com/showthread.php?t=1833212
Sent from my EVO using xda premium

rizanx said:
Exactly thats for people without custom recovery
Click to expand...
Click to collapse
does the update push the stock recovery as well?
and root is lost right?

Yes and yes.
Sent from my HTC One X using xda premium

odeccacccp said:
does the update push the stock recovery as well?
and root is lost right?
Click to expand...
Click to collapse
Yes you will lose root.
But you can obtain root easily using this method.
Just download the DebugfsRoot_Generic_v2.3.zip file from here
http://forum.xda-developers.com/showthread.php?t=1706588
extract the content and run RootDebugfs, then follow the on screen instruction and you will have root.
oh and make sure you have USB debugging on.

sorry for the mix up. yes you do lose recovery. Download goomanager from playstore and you can install TWRP recovery from the option list.

rizanx said:
Through custom recovery stock recovery is not pushed! you will still have custom recovery. You will only lose root.
Click to expand...
Click to collapse
Wrong, flashing an official rom will make you loose the custom recover too, you will have a clean stock rom once you do that. AND also this thread has nothing to share with the development forum.

Pretoriano80 said:
Wrong, flashing an official rom will make you loose the custom recover too, you will have a clean stock rom once you do that. AND also this thread has nothing to share with the development forum.
Click to expand...
Click to collapse
+1 You WILL lose custom recovery with this method. This has all been covered before...
Sent from my EVO using xda premium

Pretoriano80 said:
Wrong, flashing an official rom will make you loose the custom recover too, you will have a clean stock rom once you do that. AND also this thread has nothing to share with the development forum.
Click to expand...
Click to collapse
Thanks for clear up.

MysticMgcn said:
Isn't this already covered here? http://forum.xda-developers.com/showthread.php?t=1833212
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Where in there? Can;t find it?
1) If I am on a custom ROM can I flash the new update or I have to go back to STOCK first?
2) What's the big deal with loosing CWR and Root, it takes like 2 min to put it back, I mean there is another way to not loose it?
Thanks

I also have a question! Will this allow for OTA updates even if our bootloader is unlocked? And will we be able to flash the JB update from ASUS manually if not? Anyone know?

GRIM1337 said:
I also have a question! Will this allow for OTA updates even if our bootloader is unlocked? And will we be able to flash the JB update from ASUS manually if not? Anyone know?
Click to expand...
Click to collapse
No. when you unlocked it clearly stated no more ota updates for you.
Yes. of course you can flash manually just like any other rom.

odeccacccp said:
Where in there? Can;t find it?
1) If I am on a custom ROM can I flash the new update or I have to go back to STOCK first?
2) What's the big deal with loosing CWR and Root, it takes like 2 min to put it back, I mean there is another way to not loose it?
Thanks
Click to expand...
Click to collapse
You don't need to have stock rom. As long as you have the stock kernel your ok. You will of course lose custom recovery but its easy to download again as i have mentioned in my first post.
There is a lengthy way to do this. But why do that when it takes you literally 2 minute to root it with DebugfsRoot .
Hope it went well for you.