Related
I was trying to install Cyanogen 7 and my first step was a one-click return to stock that seemed to complete fine.
When I rebooted I go into Android 3e recovery. Each time I boot the recovery message says:
Update media. please wait
update media. finished
#manual mode#
--Applying Multi-CSC...
Installing Multi-CSC
Install default apk-files. please wait
Install default apk-files. finished
The phone is no longer recognized by windows even though I've tried several different versions of the Samsung drivers. (also tried different USB ports, different cables and different computers per my search results in here)
I can get into Download mode but the device is not recognized so its not recognized by any of the ODIN utilities to repair or restore...
Any idea what is going on - or more importantly what can I do to recover this thing?
Help?
Thanks!
First of all, I would try Heimdall One-Click instead of Odin. It's more reliable, and uses better drivers. Will it not reboot into Froyo? And which one-click package did you use?
I used the Heimdall One-Click and it seemed to complete okay. Trouble started when I rebooted. I can't seem to redo it because the the One click utilities don't recognize the phone as connected.
I always get the Windows message "USB Device is not recognized" and when I go into my Device Manager the phone is listed as an "Unknown Device"
I would strongly advise against flashing back to froyo or eclair as the bootloaders are out dated.. As.for.your phone not being recognized it could be a number of issues from anywhere to ypur pc.needs a reboot to your usb cable is bad. I once had the same issue and i reinstalled the samsung drivers a few times with no reults. Believe it or not what fixed my problem was a fresh install of kies (a program i never use)
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
I installed Keis, rebooted and it did in fact recognize and re-install the drivers. I then tried the heimdall 1-click and it failed on the attemped handshaking with Loke step. Now I am back to not being able to recognize the USB device again.!
ugh!
WinoOutWest said:
I installed Keis, rebooted and it did in fact recognize and re-install the drivers. I then tried the heimdall 1-click and it failed on the attemped handshaking with Loke step. Now I am back to not being able to recognize the USB device again.!
ugh!
Click to expand...
Click to collapse
Heimdall uses completely different drivers
Sent from my SAMSUNG-SGH-I777
Yes it installed the heimdall drivers successfully when I tried to run the on-click. Then it timed out. I now appear to be back to an unrecognized device again. Installing Keis, Samnsung drivers etc trying to get it to recognize the phone again. It easily goes into download mode.
Anyone got any ideas how I can get this thing breathing again?
Try rebooting the computer. Use a USB port in the back of the computer. Try a different cable. Open Odin before connecting phone to computer.
mrhaley30705 said:
Try rebooting the computer. Use a USB port in the back of the computer. Try a different cable. Open Odin before connecting phone to computer.
Click to expand...
Click to collapse
Tried all of this - still no love. Every once in a while it will search and install Samsung drivers but then it disconnects almost instantly.
I also fumbled through getting a Ubuntu up to try it in Linux but the download mode isn't found in linux either.
Running out of options here. Wondering if I've pooched this phone.
WinoOutWest said:
Tried all of this - still no love. Every once in a while it will search and install Samsung drivers but then it disconnects almost instantly.
I also fumbled through getting a Ubuntu up to try it in Linux but the download mode isn't found in linux either.
Running out of options here. Wondering if I've pooched this phone.
Click to expand...
Click to collapse
Its not broken permanently, I promise.
Well slap my a$$ and call me Judy!
After 1 million attempts (cords, ports. pcs, windows, linux) I finally managed to get back into my phone. I literally must have had this phone in and out of download mode several hundred times in the last 24 hours. One of my attempts finally worked in Ubuntu! Not sure why really - but I am okay with that at this point.
Thanks for all you help!
Darren
<smack> good job Judy.
I've tried a few other forums but haven't got any replies, I guess since the Galaxy 5 isn't such a popular device. I figured if there's anyone who can help me they will be here though.
I wanted to put CWM on it so I could get a CM7 port on. Unfortunately it's just about impossible for it to get detected on USB. I've installed Kies (and even the generic USB drivers found in the SDK). In 2 days I only got it to connect once, and then I went and bricked it.
The one time it finally connected I ran Odin and tried loading CWM onto it. It still hadn't finished after half an hour so I figured it ended with an error that was never displayed. So I unplugged it and as expected - brick! I can get into download (upgrade/firmware) mode so I think it can be fixed if I can get CWM on it (and just install the CM7 port I had originally intended to put on).
Problem is I cannot get the darn thing to connect! to my computer I've tried two separate PCs, one running Window 7 x64 and another running XP x32. Is there a a certain process of connecting things? I haven't ran across anyone making mention of one.
Has anyone else experienced USB problems like this with Samsung phones? Would it even be possible to flash CWM on after it's been bricked like this? When I boot (normally) all I get is an image showing a phone and a PC with and exclamation error connecting the two. Please help!
Try to look for stock firmware on the forum.xda-developers.com and flash via ODIN. You need to be able to put the phone into download mode, so maybe get an USB jig. That should do the trick. Odin has to recognize your phone. First of all right click on the ODIN executable and select "Run as administrator" on windows. Plug the phone in the DL mode and wait until it appears as active in Odin. Then flash the ROM and pit file. (Don't use ODIN one click). If ODIN does not recognize your phone try a different USB port or reinstall Kies. The Kies trick was which I used and it was able to recognize my phone.
Thanks, martin0176. I can still manage to get the phone into download mode - it's getting recognized by a PC that's the problem.
Could you tell me more about the pit file? I only have an ops file.
Try a different cable. I was having the same problem on the Samsung Continuum and it turned out that the cable was working for power, but not for data.
Hello, i am currently trying to root my sisters galaxy s 4g... Her Baseband is T949VUVKI1. Firmware is 2.3.5, Build Number is GINGERBREAD.VUVKI1. i remember flashing her phone to 2.3.5 and download mode working perfectly fine, and for some reason it wont go into download mode at all... the computer is not recognizing her phone either. YES, i do have usb drivers installed otherwise my galaxy s 4g wouldnt be recognized on my computer(odin specifically, not turning yellow). Please help, i have searched everywhere in the internet and tried almost everything... Volume up and down and plug charger, batter out volume up and down usb and battery in etc. PLEASE HELP!! Thank You in Advance.
Nvm
10c
1. Try reinstalling to drivers. Also make sure you're using the same USB port as Windows can be funny about it it sometimes.
2. if download mode is being difficult, go download the Android SDK from www.android.com. Install it, run it, and only download the platform tools. When that's done, open a command promt, CD to where the plaform tools installed (either c:\program files\Android\Android-sdk\platform-tools or c:\program files (x86)\Android\Android-sdk\platform-tools ), then issue the command: adb reboot download.
3. I suggest you check the dev section for bhundven's one-click collection. Uses Java and Heimdall vs. ODIN and works easily.
Sent from my SGH-T959V using XDA App
i have this issue 2.3.5 messed me up. Odin sees my phone in debug mode but not in download mode...using odin 1.85 sinse it is the only version that responds to my phone at all. help please!
Tytan0007 said:
i have this issue 2.3.5 messed me up. Odin sees my phone in debug mode but not in download mode...using odin 1.85 sinse it is the only version that responds to my phone at all. help please!
Click to expand...
Click to collapse
Get it back into download mode, go grab a bhundven's one-click. The one-clicks utilize Heimdall vs. ODIN, which means they use open-source USB drivers instead of the proprietary Samsung drivers. See if that enables the computer to see the phone. If so, flash the one-click
Should I uninstall the samsung drivers prior to using Heimdall's One-Click?
Tytan0007 said:
Should I uninstall the samsung drivers prior to using Heimdall's One-Click?
Click to expand...
Click to collapse
That's a good idea. Some people have reported conflicts between the drivers.
Why would only Odin 1.85 see my phone in USB Debugging and not in download mode? And all other Odin verisions never see my phone, no matter what state it is in... I am at work so I will give the one click another try when I get home. I never thought of uninstalling the Samsung drivers prior to install; however, I did use the one click method to no avail. However, Heimdall's one-click was able to see my device it just kept giving me a driver error. This is so crazy it might just work.
Tytan0007 said:
Why would only Odin 1.85 see my phone in USB Debugging and not in download mode? And all other Odin verisions never see my phone, no matter what state it is in... I am at work so I will give the one click another try when I get home. I never thought of uninstalling the Samsung drivers prior to install; however, I did use the one click method to no avail. However, Heimdall's one-click was able to see my device it just kept giving me a driver error. This is so crazy it might just work.
Click to expand...
Click to collapse
I wish I had a good answer. ODIN's a funny animal. I've been fortunate and not had any problems with it. I am hoping you are correct - maybe it was just a driver conflict. Let me know how it goes.
didn't work...
You could try downloading a terminal app from the market. Open the terminal and type:
reboot download
See if that does it.
***Update***
Okay, so Oneclick was not working at all no matter what I did with the drivers. However, in all my tinkering with it I installed the Samsung Driver, the Open Source one, and some gadget driver as well from oneclick.
Doing this put all these drivers in my computer. Then I went into my Device manager (Win 7) and looked at my USB driver and I uninstalled everything and went to the stock win 7 usb driver. Then I plugged my phone in and my computer began searching for drivers for this device when it decided that it would be a good idea to load all three drivers at once and voila my phone was then showing up on ODIN 1.85.
I then proceeded to flash my phone with a rom, probably the wrong one considering I was coming from 2.3.5 and my phone boot looped and then soft bricked(sorry if I used these term incorrectly, noobin it).
After, some nervous moment of scouring XDA I found the god-send of a post on getting in to download mode, using odin, and flashing stock 2.3.6 - thank you Raver(I believe). When I did this, my phone magically started obeying ODIN like a devout viking and is now running 2.3.6 superbly.
Keeping with my phones newly found viking heritage, I intend to figure out how to properly root it, update the kernal and modem(not sure which one is best), get CWM, and subsequesntly put in Valhalla Black.
Seeing as though this last rendevous with flashing caused me a little scare I may hold off and wait to see what the next big update is (maybe a port ICS variant) and then go with that.
Anyway, thank you Stephen for helping me out with this and to everyone in this post.
Here's some reading for you Tytan,
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_4G#FAQ_.28with_answers.29
PS: Unless you wanna brick your phone, do not flash anything that isn't intended for the SGH-T959V Samsung Galaxy S 4G. You're saying you wanna flash a Vibrant ROM. You can, if you want an expensive paperweight. Happy flashing!
2.3.5 may have been for vibrant...yeah I think I got lucky. I did it prior to knowing about xda.
Sent from my SGH-T959V using XDA App
Tytan0007 said:
didn't work...
Click to expand...
Click to collapse
How are you getting into download mode?
There was a post in another thread where the person apparently was using the power menu to get into download mode or maybe the adb command.
Have you tried both the old fashion volume +/- and plug in usb cable? Or the adb command?
Do you have access to another computer? Believe it or not sometimes just changing computers will make the difference.
Weird when I replied there was no posts other than the ones on the first page...oh well glad its working now.
Does Odin, Heimdall and Oneclick(still heimdall) work on all s5570s??
I flashed my phone with the wrong recovery image and the phone boots only to Download mode, emergency download mode and the samsung logo. I have since tried Odin but it gets stuck on "plcatform verification", tried heimdall (after I painstakingly created a heimdall package for the galaxy mini) but it gets stuck at "Error: could not initialize protocol" and one click simply says my phone is not connected.
So I'm now wondering since this is a soft brick,why are these methods failing even after trying all suggestions on this forum. I have tried this on Open Suse and Windows Xp and I have also seen a trail of frustrated owners who bricked their phones. Has someone found a solution to this black sheep that stray from normal methods of unbricking.
I believe the Galaxy mini is the most troublesome device to own when customizing it.
pinye said:
Does Odin, Heimdall and Oneclick(still heimdall) work on all s5570s??
I flashed my phone with the wrong recovery image and the phone boots only to Download mode, emergency download mode and the samsung logo. I have since tried Odin but it gets stuck on "plcatform verification", tried heimdall (after I painstakingly created a heimdall package for the galaxy mini) but it gets stuck at "Error: could not initialize protocol" and one click simply says my phone is not connected.
So I'm now wondering since this is a soft brick,why are these methods failing even after trying all suggestions on this forum. I have tried this on Open Suse and Windows Xp and I have also seen a trail of frustrated owners who bricked their phones. Has someone found a solution to this black sheep that stray from normal methods of unbricking.
I believe the Galaxy mini is the most troublesome device to own when customizing it.
Click to expand...
Click to collapse
absolutely no coz i was custom rom my LilG always ..
Hello everybody,
I am new to the forum and also new to Androids. After years of using iPhones and finally becoming fed up Apple, I've decided to try something new (please don't judge my prior smartphone selection and start posting opinions about the 2 operating systems, I do not want this thread to turn into one of the "battle of the phones" thread that I've experienced many times on iPhone forums). My friend recently got an S3 and had no use for his Galaxy S 4g, so he gave it to me so that I could try out an Android. There was one issue though, he said that the phone would not get past the Galaxy S screen and would keep re-booting itself (stuck in a boot loop). He said if I could figure out a way to fix it then it's mine.
That being said, here's my dilemma. I've tried many different methods to get the phone out of a boot loop. The first method I tried was putting the phone into restore mode and selecting the "reinstall packages" option. After this executes I get the message:
E:Can't mount /dev/block/mmcblk0p1
(no such file or directory)
E:Can't mount SDCARD:update.zip
Installation aborted.
After some further research I discovered a nice little program called Odin I read a lot about Odin and how to properly use it. After trying at least 5 different methods to get the phone into download mode with no success, I purchased a jig. The jig did the trick and instantly put me into download mode, I was ecstatic and hopeful that I could now fix the phone with Odin. I connected the phone to my PC in download mode, but Odin still didn't recognize the phone (I tried many versions of Odin, 1.85, 1.87, and the most recent 3.07). I do have the latest drivers for this phone, which I downloaded from Samsung's website. The phone will charge through the computer but the computer does not recognize it otherwise and will not allow me access its mass storage (I am running Windows 7 64 bit). I have tried using a different USB cable, and I have tried to use a different PC, the other PC I used popped up with a message saying that Windows could not successfully download the drivers (that was after I downloaded the drivers from Samsung's webpage and plugged the phone into the computer). I've even tried transferring stock firmware onto an external SD card and loading it onto the phone from restore mode (is that even possible to do?). I have also tried running Odin in compatibility mode, still didn't detect the phone. I should probably also mention that Kies Mini also does not recognize the phone. I asked my friend if he ever tried rooting this phone and he said no, so I'm assuming this issue has nothing to do with a failed attempt to root.
I really want to get this phone working, but I have run out of options to try. I am hoping that someone on here has a solution for me from a similar experience. After reading through the forum, I have noticed that people on here are very helpful and also very friendly; something that I can say is very different from some of iPhone forums I've used. I apologize if there is already a similar thread to mine, I've read through many threads and none of the solutions have worked for me. I also apologize for my first post being so lengthy, I just wanted to state all of the methods that I've tried to fix this phone. Thanks for your replies.
Hi hubbs134
You have come to the right place.
First,
I suggest you read a little bit about this phone and how to put it in Recovery (by holding Volume Up + Volume Down + Power until you see the SGS4G splash screen) and Download modes, it will help you in the future.
You can find it all in the Wiki.
Second, use this guide to One-Click Heimdall your way to Stock KJ6 2.3.6 Gingerbread ROM (latest official ROM for this phone).
If you use this file (instead) with that guide, you will also get phone rooted, or else you will need to make another flash of a rooted kernel (as the guide suggests).
Now, if you have the official latest stock, but still want some ICS/JB lovin', if you have CWM recovery v5 (you will see the recovery info once you're in that mode), you can flash CM9/AOKP/HebMIUI/UltraGen/RemICS/CM10/Slimbin/etc. etc. etc. ROMs.
Enjoy and welcome aboard!
P.S what the @#%#$ were you doing with an iphone ?
itzik2sh said:
Hi hubbs134
You have come to the right place.
First,
I suggest you read a little bit about this phone and how to put it in Recovery (by holding Volume Up + Volume Down + Power until you see the SGS4G splash screen) and Download modes, it will help you in the future.
You can find it all in the Wiki.
Second, use this guide to One-Click Heimdall your way to Stock KJ6 2.3.6 Gingerbread ROM (latest official ROM for this phone).
If you use this file (instead) with that guide, you will also get phone rooted, or else you will need to make another flash of a rooted kernel (as the guide suggests).
Now, if you have the official latest stock, but still want some ICS/JB lovin', if you have CWM recovery v5 (you will see the recovery info once you're in that mode), you can flash CM9/AOKP/HebMIUI/UltraGen/RemICS/CM10/Slimbin/etc. etc. etc. ROMs.
Enjoy and welcome aboard!
P.S what the @#%#$ were you doing with an iphone ?
Click to expand...
Click to collapse
Thanks for your reply, I have read a lot about this phone and know how to get into download and recovery mode. I tried the method you mention, however, when running the command window I get errors for both roms you suggested (i attatched a screen shot of the errors I'm getting). Do you know how I can fix these errors so that I can proceed with the rest of the tutorial? Thanks.
PS I only had an iPhone because I had yet to discover how bad a** Androids are
It sounds like you can't use Odin because of a windows issue. Try installing linux. I use ubuntu
Sent from my HTC One X+ using xda app-developers app
---------- Post added at 07:48 AM ---------- Previous post was at 07:47 AM ----------
You can also run as live CD or in a virtual machine
Sent from my HTC One X+ using xda app-developers app
hubbs134 said:
Thanks for your reply, I have read a lot about this phone and know how to get into download and recovery mode. I tried the method you mention, however, when running the command window I get errors for both roms you suggested (i attatched a screen shot of the errors I'm getting). Do you know how I can fix these errors so that I can proceed with the rest of the tutorial? Thanks.
PS I only had an iPhone because I had yet to discover how bad a** Androids are
Click to expand...
Click to collapse
No need to replace PC OS...
1. Uninstall all your Java versions and Samsung drivers and reboot.
2. Reinstall Java 1.7u..
3. Follow the guide, it should work.
When you reinstall the driver through Heimdall - it will appear as Gadget device.
Good luck !
itzik2sh said:
No need to replace PC OS...
1. Uninstall all your Java versions and Samsung drivers and reboot.
2. Reinstall Java 1.7u..
3. Follow the guide, it should work.
When you reinstall the driver through Heimdall - it will appear as Gadget device.
Good luck !
Click to expand...
Click to collapse
I second this... This should fix your driver issues.
Thanks for both of your replies. Odin detected my friends GS3 so I know it's not a Windows issue.
itzik2sh I did what you suggested and now got the command to function properly. I am going to try and finish the tutorial, I will be back soon with results. Thanks.
The phone is in download mode with Heimdall One-click 1.3.1 running and nothing is popping up in the command window. Neither is showing that the device is connected. Any suggestions? Thanks
Irish Enigma said:
I second this... This should fix your driver issues.
Click to expand...
Click to collapse
I forgot to mention that I can here the sound that a device was just connected to the computer via USB, and a message pops up saying USB device not recognized. When I click on the message it says "One of the USB devices connected to this computer has malfunctioned, and Windows does not recognize it."
Tried a different port? Tried second different port with a different USB cable?
itzik2sh said:
No need to replace PC OS...
1. Uninstall all your Java versions and Samsung drivers and reboot.
2. Reinstall Java 1.7u..
3. Follow the guide, it should work.
When you reinstall the driver through Heimdall - it will appear as Gadget device.
Good luck !
Click to expand...
Click to collapse
Theraze said:
Tried a different port? Tried second different port with a different USB cable?
Click to expand...
Click to collapse
Ok I got the device connected and I got Zadig running, however, there is no option for "Samsung USB Composite Driver" on the drop down list, on "gadget Serial", "Gadget Serial Control (interface 0), and "1.3 HD Webcam (Interface 0)'. What should I do?
On the one-clicks, you don't actually want to use zadig. Apparently it conflicts, which is awesome for something that gets released WITH the tool.
If you're doing manual Heimdall, make sure you've told zadig to list all devices in the menus. Your phone should show up after that.
If you're using a one-click, make sure you're using a USB port on your computer where you have NOT installed zadig, Kies, or Samsung official drivers. Follow the steps in the one-click religiously, and it should cooperate.
Follow the guide %100 then Odin should work
Sent from my HTC One X+ using xda app-developers app
Ok I ended up getting the phone to register in Odin. I flashed it with the stock rom in Odin and it said success. The phone booted and it seemed like it was going to work but then the recovery menu came up. I posted a screen shot of what it says, what action should I take from here? Thanks
I am also in a different boot loop now, before it would load to the first screen (black screen saying samsung galaxy 4g) then restart, now it boots to past the splash screen to where it says "Samsung" and then reboots back to the screen where the pink letters roll across the whole screen. I don't need to flash bootloaders do I?
Looks like recovery is broken or the updater script on the ROM you're trying to flash is messed up. Flash a new and the proper recovery via Odin then download a new Rom and either sideload it or mount usb from recovery and push it... Or you could just use Odin XD
EDIT: Samsung's are easy to brick and hard to debrick it may take a couple of trys
Sent from my HTC One X+ using xda app-developers app
Irish Enigma said:
Looks like recovery is broken or the updater script on the ROM you're trying to flash is messed up. Flash a new and the proper recovery via Odin then download a new Rom and either sideload it or mount usb from recovery and push it... Or you could just use Odin XD
Sent from my HTC One X+ using xda app-developers app
Click to expand...
Click to collapse
OK GREAT NEWS! After flashing with Odin and that screen popping up, I clicked update from SD card, which failed. I then click system reboot, which brought me into the new boot loop. I put back into download mode and re-flashed with One-Click. Same recovery menu came up as before but when I clicked reboot system it hung at the "Samsung" black screen (after the splash screen) for about 20-30 seconds and then booted up I'm afraid to turn the phone off and see if it reloads lol. Is it safe to say that it is fixed? Or should I still follow your advice and run the proper recovery in Odin and then sideload a new rom? Or take different action? Thanks for all your help guys! Everyone gets a thanks click for being so helpful and friendly on an unhappy/confused/pissed off/ now happy new Android user!
Ok I just put my Tmobile simcard in and the phone is not detecting the sim. Any suggestion?
The IMEI number and baseband both say "unknown", I'm assuming this has to do with the simcard not registering?
hubbs134 said:
The phone is in download mode with Heimdall One-click 1.3.1 running and nothing is popping up in the command window. Neither is showing that the device is connected. Any suggestions? Thanks
Click to expand...
Click to collapse
What Heimdall package are you applying ?
After JAR package runs you are ready to go.
As I wrote, according to guide you can reinstall "Gadget" driver.
EDIT :
Enigma, if you're not an owner of an SGS 4G please stop advising.
Odin is not the common way since we have MTD ROMs and it had its problems.
hubbs134,
blank IMEI is a serious problem. without a proper IMEI your device is everything but a phone.
Try this : take battery off, press the POWER button for 10 seconds, leave device untouched for 15 minutes and then put battery back and power up.
This could bring your IMEI back to life. If not... maybe another flash will help.
P.S
The 3e recovery image you put on post #14 is a snapshot of the the stock unrooted ROM recovery.