Database Info

Problems flashing ddtk3

I have cm7.2 rc0 that I flash on cm 7.2 rc5.5 that I directly flashed on ddtk3(without actually using it even once) that I flashed over stock gb 2.3.4 . Now I used Odin and wiped cache /data on the stock recovery (as well as cwm) but the phone still goes into boot loop. I want the stock rom but can't install it. Help!
Also how to root it? Don't want to use rajrocks deoxed thing cause I don't like the colour scheme and stuff.
Thanks

itworks awsome

May be you Can try this on your own risk
The stock rom links are also available there
http://forum.xda-developers.com/showpost.php?p=23324199&postcount=1

Thanks I'll try that but I really don't think it's a problem with the rom.
Sent from my GT-S5670 using xda premium

u have to use it ddkt3 for sometime

Try to flash the stoc rom via odin, search youtube for tutorial flashing via odin

How to jb to ics ?? Help needed

I am running CM10 alpha 2 and i want to revert of CM9 alpha 13 . I wiped dalvik cache and cache and installed cm9 but the phone is not booting. It stays on boot animation.
When i flash cm10 it boots.
How to flash cm9 over cm10 ?? ANyway ??

anuraagkochar said:
I am running CM10 alpha 2 and i want to revert of CM9 alpha 13 . I wiped dalvik cache and cache and installed cm9 but the phone is not booting. It stays on boot animation.
When i flash cm10 it boots.
How to flash cm9 over cm10 ?? ANyway ??
Click to expand...
Click to collapse
Make sure you do a factory reset as well as wiping the caches then try re installing
Sent from my SGH-I777 using xda premium

anuraagkochar said:
I am running CM10 alpha 2 and i want to revert of CM9 alpha 13 . I wiped dalvik cache and cache and installed cm9 but the phone is not booting. It stays on boot animation.
When i flash cm10 it boots.
How to flash cm9 over cm10 ?? ANyway ??
Click to expand...
Click to collapse
Hi
You should check this thread out http://forum.xda-developers.com/showthread.php?t=1905301
I hope this helps

Reflash but with factory reset and format dbdata afterwards
Sent from my GT-I9003 using xda app-developers app

[Q] I can´t flash any ICS/JB rom

Hi,
I have problem with my P6200(without IR).When I flash any ICS/JB rom my tab is not booting.HC roms work fine.Today I try CM10.1.I flash aorth's CWM 6.0.2.7,in that,I wipe data and now I flash cm10.1.After reboot its stuck on Galaxy Tab 7.0 plus logo.I try reflash it again without wipig but its still stuck.When I try stock 4.0.4 rom its bootlooping Galaxy tab logo.Is there any chance to get these roms work?

Well I sorta had the same issue. So here is what I did. Go back to HC then to ICS if it boot loops go into recovery and wipe data factory reset and it should boot up. After that root and flash cm 10 it should work if it boot loops, wipe data factory reset. But it should work. Then after that install latest CWM recovery and then flash cm10.1
Well this is what worked for me I hope it does for u too
Sent from my GT-P6200 using XDA Premium HD app

Ok,but I can't wipe data in recovery,ICS flashes stock recovery,If I wipe data my Tab is Emmc bricked.I try flash ICS,flash CWM,wipe data but it stuck on Galaxy Tab Plus logo.

maybe emmc problem
tom411 said:
Ok,but I can't wipe data in recovery,ICS flashes stock recovery,If I wipe data my Tab is Emmc bricked.I try flash ICS,flash CWM,wipe data but it stuck on Galaxy Tab Plus logo.
Click to expand...
Click to collapse
Same thing happen to me i never wipe with factory recovery but unfortunate emmc brick bug still exist on stock ics rom
try to downgrade to HC and install CWM via ODIN
Aorth's ClockWorkMod 6.0.2.7 (Odin Format) (All Devices)
http://forum.xda-developers.com/showthread.php?t=2112667
try to wipe start from there and check if you have emmc brick bug

Downgrade to HC, go to STOCK RECOVERY, then wipe data n cache..it will giv you really2 clean wipe..dont worry, no emmc bugs on HC..i already tried many times..
Sent from my GT-P6200 using XDA Premium HD app

Thanks,now I'm on stock ICS 4.0.4 rom.I flashed stock HC, wipe data in stock recovery,rebooted to system and I flashed stock ICS.It works fine.But I want upgrade to CM10.1 I must do this?:
1. Flash aorth's CWM 6.0.2.7
2. Wipe data and flash CM10
3.Wipe data and flash CM10.1

[Q] Help! Samsung GT I5801 boot Loop on cyanogen mod 7 and AOKP.

So day before yesterday I finally tried to install a custom ROM on my Samsung GT i5801 phone which previously ran Froyo. I didn't know much about ROMs and it was my first time so i tried to use one of AOKP ( http://forum.xda-developers.com/showthread.php?t=1548627 ) I don't know why but it wouldn't install using CWN v.5.0.2.8 and I tried to do it anyways using ODIN. It kinda flashed it but it never worked. It destroyed my stock ROM and I didn't have any backups.
Then I found a Cyanogen mod 7 ROM for GT I5801 and I installed it on my phone using CWN. It installed fine but keeps boot looping. I tried everything after that. Clearing cache, Dalvik Cache, and even tried to re-install the ROM using the wipe data/ factory reset and installing the Cyanogen zip file, but it still boot loops.
Today I tried the AOKP ROM again using odin. It flashed perfectly but its stuck on boot loop too. The white screen keeps flashing.
Can anyone tell me of a solution, please?
Any help is welcome.

download Kyrillos rom v9.7.1 and try flashing it using Odin. It worked for me as i was flashing GingerDX rom. And always perform A wipe data after flashing rom.
Sent from my GT-I5800 using xda app-developers app

sarcasticsmartass said:
download Kyrillos rom v9.7.1 and try flashing it using Odin. It worked for me as i was flashing GingerDX rom. And always perform A wipe data after flashing rom.
Sent from my GT-I5800 using xda app-developers app
Click to expand...
Click to collapse
I flashed this file CM7.2.0-GT-I5800_Alpha9_ODIN and my phone now works perfectly. Now I will try the Kyrillos rom that you mentioned. Thanks.

Can't get TouchWiz to work

hi i've tried like 3 time to install this rom, flashed with odin to factory rom, then did all the instructions to install TW and all the installation goes well, but when i go ahead and reboot, it just stays at the samsung galaxy ace GT-s5830M screen.
i'm installing [ROM][CM9]Touchwiz Revolutionized 5.0-V4.0 [FINAL] [UPDATE][12.12.2013] on my Galaxy Ace GT-S5830M
pls help i really want to install this.

really no1?

Have u dirty wiped the last ROM? Dirty wipe means flashing another ROM without wiping anything
Sent from my HM NOTE 1LTE using XDA Free mobile app

This rom is CM9 based, so try to flash it through a custom recovery.. don't forget to wipe

ElitePanther said:
really no1?
Click to expand...
Click to collapse
No, you are No.2, lol

Cm9 its an custom ROM which can be flashed by custom recovery(cwm,philz,twrp)(I recommend philz and twrp).. first flash custom recovery by Odin and goto custom recovery and wipe cache,dalvik cache and wipe for installing full ROM, and select the ROM package zip and let to install, after flashing successfully , reboot your phone... it will boot with an boot animation of cm9