Database Info

[ROM] Ace_Cingular_US_1.84.502.11-Radio-26_06_06 _30_M

Here's the stock shipping RUU with all of the HSUPA OTA update patches applied, rooted, busyboxed.
Mods:
System image repacked with OTA patches, ROOT & Superuser & Busybox
Boot Image Kernel rebuild with OTA config, TUN and CIFS and EXT4 support added.
Hboot removed so any ENG Hboots are not overwritten.
Stock recovery removed because - well who wants stock recovery?
Regular Android unknown sources (side loading) toggle enabled in SL version (bottom download)
Notes:
S-OFF is required to flash this
Rename to PD98IMG.zip and put it on your sdcard
Flash it from HBOOT when prompted to upgrade.
This WILL wipe data. Do a nandroid backup, then you can selectively restore data from nandriod after installing this (Provided you are coming from a compatible ROM).
I did not make this Clockworkmod flashable because it contains a radio. I believe the RUU method is a safer way to flash radios.
Flash it. Kang it. Trash it. It's VERY stock. It's VERY clean.
DOWNLOAD:
RUU_Ace_Cingular_US_1.84.502.11-Radio-26_06_06_30_M_PD98IMG.zip - No side load (Unknown sources/3rd party app - original ATT) version
md5sum: f2c80025662eae4f68f205d5cda48fa2
Ace_Cingular_US_SL_1.84.502.11-Radio-26_06_06_30_M_PD98IMG.zip - Same as above, but with mod for side load toggle enabled
Ace_Cingular_US_SL_1.84.502.11-Radio-26_06_06_30_M_PD98IMG.zip Mirror
md5sum: 7d01386682e7ffdbecc725e68351c13a

attn1 said:
Here's the stock shipping RUU with all of the HSUPA OTA update patches applied, rooted, busyboxed.
Mods:
System image repacked with OTA patches, ROOT & Superuser & Busybox
Boot Image Kernel rebuild with OTA config, TUN and CIFS and EXT4 support added.
Hboot removed so any ENG Hboots are not overwritten.
Recovery removed because - well who wants stock recovery?
Notes:
S-OFF is required to flash this
Rename to PD98IMG.zip and put it on your sdcard
Flash it from HBOOT when prompted to upgrade.
This WILL wipe data. Do a nandroid backup, then you can selectively restore data from nandriod after installing this (Provided you are coming from a compatible ROM).
I did not make this Clockworkmod flashable because it contains a radio. I believe the RUU method is a safer way to flash radios.
Flash it. Kang it. Trash it. It's VERY stock. It's VERY clean.
RUU_Ace_Cingular_US_1.84.502.11-Radio-26_06_06 _30_M_PD98IMG.zip
md5sum: f2c80025662eae4f68f205d5cda48fa2 (Uploading)
Click to expand...
Click to collapse
can we flash this then flash a custom rom over it & keep everything the same ?

Doo Doo said:
can we flash this then flash a custom rom over it & keep everything the same ?
Click to expand...
Click to collapse
No, unless the custom rom is just lke this one.
Define everything the same?
There were a lot of software patches in this OTA - among them were patches to RIL. I think it will take a while to sort out what this OTA does.

Where do you download it at?

capman231 said:
Where do you download it at?
Click to expand...
Click to collapse
Patience. OP says uploading - my ISP is none too speedy today. As soon as it is done I will update the OP.

Thanks, I am real anxious to find out if this update fixed the HAC and raised any of the other volumes

Is app sideloading enabled in this ruu?
Sent from my Desire HD using XDA App

capman231 said:
Thanks, I am real anxious to find out if this update fixed the HAC and raised any of the other volumes
Click to expand...
Click to collapse
Let us know. I am already back on CM7.
Flyer729 said:
Is app sideloading enabled in this ruu?
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Nope. It's stock AT&T - just rooted, without overwriting recovery and hboot

I am downloading it now. I will give it a run a report back.
Thanks!

OK attn1, nice job. I just installed it, working flawlessly. GPS no problems.
First run on speed test 1.2 down 1.3 up I was looking for better but I'll try later and see. Still I'm ok with that. All apps installed and running. Nice stock rom with update. No issues so far. Still have to test the phone and volume and others but looking good.
Booted into recovery still eng s-off .... nice

could I do this update and then flash a different kernel over it? I'm sure donvaughn will get Ingersoll updated with all this eventually, but wanted to check it out.
After all, his ROM is essentially a stock rom - Rooted and OC'd.

What's the best way to enable side loading of app s and keep this, wanna try this but need my side loading cause I use amazon a lot thanks
Sent from my Desire HD using XDA Premium App

Hi Bhull521, what have you found so far? I had it about 50% downloaded and my internet service went down, Car hit a pole. Just started the download again. I am real curious about the volume on ringtones and notifications and if the HAC works.
capman231

HBOOT not finding PD98IMG.zip can anybody help

Different radio....any improvement?

capman231 said:
Hi Bhull521, what have you found so far? I had it about 50% downloaded and my internet service went down, Car hit a pole. Just started the download again. I am real curious about the volume on ringtones and notifications and if the HAC works.
capman231
Click to expand...
Click to collapse
Volume seems fine although I personally like it very loud but this is good right out of the box. What is HAC?

Thanks. But is it possible to get a mirror instead of this heinous download site?

Bhull521 said:
Volume seems fine although I personally like it very loud but this is good right out of the box. What is HAC?
Click to expand...
Click to collapse
Hearing aid compatibility. It was broken in the stock rom.
Sent from Desire HD or Inspire 4G or whatever this thing is called via premium XDA app.

tmdegler said:
HBOOT not finding PD98IMG.zip can anybody help
Click to expand...
Click to collapse
To ask the obvious...you renamed the file to PD98IMG.zip and copied it to the root of your SD card?

HAC Is "Hearing Aid Compatibile" It's in "Settings" under "Call". The problem with the stock ROM is that HAC works great on incoming calls, but the person on the other end can't hear you. The only way to test it is to turn it on and make a call. If the person you call can hear you, it's fixed. The HAC is one of the main reasons I choose the Inspire as I wear hearing aids in both ears and it's hard for me to talk on a regular cell phone. If you could test it, I would greatly appreciate it.
capman231

Just updated to newer RIL (radio drivers)

I didn't want to change the radio firmware because its the firmware that came with the inspire 26.06.04.06_M. I updated RIL and afterwards the GPS gets a very solid lock fast 9 points. I now get 5 bars, I was getting 3 and the calls are more clear.
Please see this link here. I booted to recovery mounted /system and then ran the zip file update. Rebooted twice (I know what is the deal with the twice factor?) And, everything works great now.
I figure that updating to newer drivers is a lot safer than updating the radio firmware and I was correct.
Follow these instructions
http://forum.xda-developers.com/showthread.php?t=902752
Radio Drivers (AKA RIL)
http://dl.dropbox.com/u/9319586/RIL/HTC-RIL_2.2.0131HM.zip
Let me know if this helps you out.

ehhh was any of that page in english?

Ok well should it work for cm7?
Sent from my Desire HD using XDA App

r_3 said:
ehhh was any of that page in english?
Click to expand...
Click to collapse
I hear ya that post is written in gibberish to me lol.

Thanks, will give it a try

Hey now I flashed it and my GPS locked in less than 5 seconds. Nice work
Sent from my Desire HD using XDA App

should we flash the RIL you posted if we are on gingerbread or froyo? Does it matter?? I assume its safe with any gingerbread rom since you are running one...
and to the others...all you really need from that post is the install steps, which couldn't be any easier to understand:
zikyHD said:
Installation: (Tks to siedkins )
1. Reboot into recovery mode
2. Full nandroid back up
3. Select flash from SD card - select radio
4. Should get a notification to reboot to apply the radio flash
5. Once rebooted it will automatically take you back into recovery mode
6. Mount "/system"
7. Select flash from SD card - select RIL
8. Reboot once that has flashed and cross your fingers !!!
Click to expand...
Click to collapse

So buddy to install the new radio just put PDimage on root of SD and go into hboot and flash new radio?
Sent from my Desire HD using XDA App

Jasoninaz said:
I didn't want to change the radio firmware because its the firmware that came with the inspire 26.06.04.06_M. I updated RIL and afterwards the GPS gets a very solid lock fast 9 points. I now get 5 bars, I was getting 3 and the calls are more clear.
Please see this link here. I booted to recovery mounted /system and then ran the zip file update. Rebooted twice (I know what is the deal with the twice factor?) And, everything works great now.
I figure that updating to newer drivers is a lot safer than updating the radio firmware and I was correct.
Follow these instructions
http://forum.xda-developers.com/showthread.php?t=902752
Radio Drivers (AKA RIL)
http://dl.dropbox.com/u/9319586/RIL/HTC-RIL_2.2.0131HM.zip
Let me know if this helps you out.
Click to expand...
Click to collapse
I flashed the newest OTA radio in my Sig. Just wondering if I need to flash the RIL? What difference would I expect? Like all people above me, I don't understand the gibberish even though I was a comp sci major. LOL

I'm using xda app but what radio is the newest one?
Sent from my Desire HD using XDA App

mattmiller said:
I'm using xda app but what radio is the newest one?
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
this is the newest at&t radio --> 12.39a.60.19_26.06.06.30_M
this is the newest gingerbread radio --> 12.54.60.25_26.09.04.11_M2

Well using coredroid or cm7, which would be best?
Sent from my Desire HD using XDA App

mattmiller said:
Well using coredroid or cm7, which would be best?
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
choosing a radio is really by preference so the best advice i can give you is to experiment with a couple of radio's till you find 1 that works well for you thats what i did
it wouldn't make no sense for me to tell you to flash this radio or that radio because some radio's may work good for some & not for others ya digg

I meant no point of flashing a stock rom 2.2.1 radio when I'm using gingerbread eh?
Sent from my Desire HD using XDA App

This might be an easier way for some of you to do this.
http://forum.xda-developers.com/showthread.php?t=1061712
This has a .zip you download that will include 3 files. The new Radio, already in a bootloader ready PD98IMG.zip file, a file called id10ts_ATT_Custom_ROM_Speed_Booster.zip (which is actually just the new RILs and the Prop Editor app (which can be removed) which is CWM flashable, the 3rd file (telephony.db) will not be needed for this process
Put these 2 files on your SD, boot to bootloader and install radio. Boot to Recovery and flash RIL. Done
On a side note - I have not been able to get GPS to lock for the life of me on the last 3 or 4 ROM/Radio combinations I've had installed. I've tried every single fix on these forums and nothing seemed to work. I was most recently running Android Revolution 5.1.3 (Gingerbread ROM) with the recommended GB radio. I flashed this new ATT radio, flashed the RIL, flashed the radio again, flashed the RIL again, and I appear to have GPS back. Finally.

[Q] Anyone able to extract the new radio from 1.84 update?

Hi, after the latest 1.84 release I would like to try to install the new radio on my htc ones s trying to resolve a rebooting issue I have when the phone switches from hsdpa to wifi.
My phone is rooted with custom rom now so I dont have access to the 1.84 update, but I understand there is a new radio embedded in the update itself.
Is there anyone able to extract it and release it as a zip file to install from recovery?
Thanks
Franco

fsamoggia said:
Hi, after the latest 1.84 release I would like to try to install the new radio on my htc ones s trying to resolve a rebooting issue I have when the phone switches from hsdpa to wifi.
My phone is rooted with custom rom now so I dont have access to the 1.84 update, but I understand there is a new radio embedded in the update itself.
Is there anyone able to extract it and release it as a zip file to install from recovery?
Thanks
Franco
Click to expand...
Click to collapse
+1 for this, anyone can do this?

If you looked around you'd see it's been posted quite a few times as a flashable zip.
Sent from my HTC One S using xda premium

doktortaru said:
If you looked around you'd see it's been posted quite a few times as a flashable zip.
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
...and also seems to have many problems of it's own, such as potentially no wifi at all...

HI, I did look around, I ll look harder

TMOUS Radio Update

make sure you read carefully on how to flash this in cwr
tip--fastboot boot "recovery.img" "exact name of recovery"

anyone have mirror for this?

[S4]Radio_1.08es.50.02.21_10.09c.50.04L Vodafone UK RUU OTA 2.35

PLEASE MAKE A NANDROID BEFORE THAT
Hello XDA-Community,
This is the brand new RUU Radio from the EU 1.08es.50.02.21_10.09c.50.04L.​​
So here it is: only for HBOOT below 1.13
For Users who want an adventure, you can now downgrade your hboot: http://forum.xda-developers.com/showthread.php?t=1990043)
Downloads​
http://d-h.st/fNB​
MD5 Sum: c1b965f9db9bdc8425d6278aa4351090​
ONLY FOR S4
How to install it:
Place the ZIP file on the root folder of your sdcard
Go to reocvery and then choose the Radio zip you downloaded before.
After the flash process finished, wipe your cache and your dalvik cache.
Boot the phone, or if you are an US Users, install the custom config for this radio below.
CONFIG FOR US USERS
Add this to your build.prob (/system/buld.prob or use the app: build.prob editor)
Code:
ro.ril.hsdpa.category=28
ro.ril.hsupa.category=7
ro.ril.fast.dormancy.rule=2
ro.ril.radio.svn=5
A little list of improvments and bugs:
BUGS:​
On Sense Rom's wifi will go out while screen is off. (Again, but CM10 problems can be fixed by adding US Rules of this Radio on build.prob)
Improvments:​
Better receiption
Better switching between modes
Soon i will add an Aroma script with all RUU's

This radio is awesome on tmous in the north east Boston mass area thanks for the share
Sent from my HTC VLE_U using xda premium

pyro43284 said:
This radio is awesome on tmous in the north east Boston mass area thanks for the share
Sent from my HTC VLE_U using xda premium
Click to expand...
Click to collapse
1. can you post a screenshot of your settings>about phone>baseband
2. can you copy your system/etc/firmware folder, zip it, and post it?
i keep getting 1.08ts after trying to flash according to instructions in OP, instead of 1.08es as this is supposed to be

tnpapadakos said:
1. can you post a screenshot of your settings>about phone>baseband
2. can you copy your system/etc/firmware folder, zip it, and post it?
i keep getting 1.08ts after trying to flash according to instructions in OP, instead of 1.08es as this is supposed to be
Click to expand...
Click to collapse
Yeah me too, it is because we use AOKP or CM10.

nespresso33 said:
Yeah me too, it is because we use AOKP or CM10.
Click to expand...
Click to collapse
im pretty sure if he posts that system/etc/firmware folder we could manually add it to the rom we use, then flash the rom and have it install that way
anyway, id like to try it
bored here
also, i cant extract the files from the radio.img,... extract.exe stops working every time

tnpapadakos said:
im pretty sure if he posts that system/etc/firmware folder we could manually add it to the rom we use, then flash the rom and have it install that way
anyway, id like to try it
bored here
also, i cant extract the files from the radio.img,... extract.exe stops working every time
Click to expand...
Click to collapse
these are the files extracted from radio.img but i don't not know how to integrate into CM10
https://www.dropbox.com/s/lp8xllp0i8z1gt2/radio.rar

Wait some time, i release thes week a zip file with Sense Radios and one with the CM10 counterparts

arko7123 said:
these are the files extracted from radio.img but i don't not know how to integrate into CM10
https://www.dropbox.com/s/lp8xllp0i8z1gt2/radio.rar
Click to expand...
Click to collapse
cool thanks, but i still want to see pyro43284's folder and screenshot....theres alot of files missing compared to the system/etc/firmware files cm10 has, which is the TMoUS newest radio...or maybe they didnt all extract or maybe this radio just updates these specific files in an already existing EU radio install....so pyro, if youre reading this, id still like to see those

I picked up a One S to keep me until my Nexus 4 arrives.
I love HTC phones OS but I hate the reception! I have had three HTC's, 3 Motorola, 1 Samsung and 1 LG in the last 6 months and the HTC have consistently been the worst for reception.
The current HTC, has this radio on it currently. 1.08ts.50.02.21_10.09c.50.04L. I am trying (unsuccessfully I might add) to flash a different radio (radio-0.16.31501S.17_2_10.23.31501S.10L)
I have tried fastboot, with no success ( I can a have been able to use fastboot on this current phone without issues), I have tried from CWM and have tried with TWP without success.
Here is my setup.
CM 10 (nightly but the lastest, 10-20121108-nightly-ville)
HBoot 1.14.0004
Current radio (however while in fastboot usb mode the radio reads 1.09ts.50.02.04?, why would this be different)
You see by the picture it is dropping the signal consistently.
Any help would be appreciated.

tnpapadakos said:
1. can you post a screenshot of your settings>about phone>baseband
2. can you copy your system/etc/firmware folder, zip it, and post it?
i keep getting 1.08ts after trying to flash according to instructions in OP, instead of 1.08es as this is supposed to be
Click to expand...
Click to collapse
Here's the screen shot... http://db.tt/OVvhQiSC thats the firmware had to make it a zip so I could put it in dropbox just extract it its NOT FLASHABLE
Anything else I can do to help??
Sent from my HTC VLE_U using xda premium

pyro43284 said:
Here's the screen shot... http://db.tt/OVvhQiSC thats the firmware had to make it a zip so I could put it in dropbox just extract it its NOT FLASHABLE
Anything else I can do to help??
Sent from my HTC VLE_U using xda premium
Click to expand...
Click to collapse
thanks that great
looks like im gonna wait for tecardo to do his thing
was hoping they would be all the same files, and i was just gonna swap them out, but there are too many differences

http://d-h.st/XBu
This is for sense: ALL RADIOS

Tecardo said:
http://d-h.st/XBu
This is for sense: ALL RADIOS
Click to expand...
Click to collapse
???? It is a large file. If I install a sense rom with this change my radio if I flash it?
I still can't change my radio. I am going to flash the orginal RUU and hope that it will change my radio as it is different than what is on my phone now.
It is a large file. Last ditch effort.....
If I install a sense rom will flashing this change my radio?
thanks

Yes, this only changes radio. It's only avaible with hboot lower than 1.09

Tecardo said:
Yes, this only changes radio. It's only avaible with hboot lower than 1.09
Click to expand...
Click to collapse
Or CM10... dc211 made a flashable zip. Works great in US so far

anyone's speaker get fuzzy from time to time on phone calls? it only happens here and there but it get annoying cause its nice and loud. at first i thought it was other callers but its been happening on almost all my phone calls.
I'll try to re-flash and see if that helps. i always check md5 sum before i flash and follow OP but its weird..

[ROM] Official 3.19.401.101 | Android 4.1.1 | (De)odexed | Init.d | Rooted | Sense 4+

I made this for myself a while ago, and I noticed that there wasn't a deodexed ROM on the VilleC2 forum so I figured I'd make it generic and put it up to save people having to make one. It's not meant to be anything crazy as it's just a ROM I made for myself. It's basically stock with a couple of small edits to make it a bit more usable
Features:
Latest official 3.19.401.101
Android 4.1.1
Sense 4+
Bloat removed
Deodexed or Odexed
Init.d support
Rooted w/ Busybox
Sense 5 app icons
System r/w
Click to expand...
Click to collapse
Because this is a JB ROM, you need the latest HBOOT to install and use this ROM.
I see no reason why you can't install this over ICS as long as you have the correct HBOOT (but I haven't tried this).
Installation:
Download the .zip and place it on your SD Card.
Install the .zip via TWRP recovery.
Wipe dalvik/cache.
If you're S-OFF, you're done - just reboot and you're set.
If not, flash the boot.img from inside the .zip in fastboot:
Code:
fastboot flash boot boot.img
NOTE: the kernel is stock with r/w enabled, not completely stock. [Taken from flar's post]
Click to expand...
Click to collapse
Oh, and as a side note: the first boot on the deodexed version will take a while but it will get there. Afterwards it'll boot quickly, as normal.
DOWNLOAD DEODEXED
MD5: 6692acbf17502bde45fa11f495296da4
DOWNLOAD ODEXED
MD5: c1fdb21e7a67cd33093214c856ee8871​

Thank you man, I was looking for something like this for a long time now .
Later edit :
Is not starting . Stuck at HTC ONE screen. I tried twice and waited for ~20minutes to boot .. nothing. I am not S-off so I flash boot.img.. in case it matters. I installed Viper 3.0.2 after and all went smooth

My HBOOT is 3.01.0000, so is that the last HBOOT?
And after flash this ROM, is my HBOOT 3.19?

icrazy said:
Thank you man, I was looking for something like this for a long time now .
Later edit :
Is not starting . Stuck at HTC ONE screen. I tried twice and waited for ~20minutes to boot .. nothing. I am not S-off so I flash boot.img.. in case it matters. I installed Viper 3.0.2 after and all went smooth
Click to expand...
Click to collapse
That's odd, let me take a quick look at what it might be. Sure HBOOT is correct?
Edit: Just re-flashed the .zip and it was sat on HTC One boot screen for just over two minutes so I figure something is wrong down your end.
Finndang said:
My HBOOT is 3.01.0000, so is that the last HBOOT?
And after flash this ROM, is my HBOOT 3.19?
Click to expand...
Click to collapse
This ROM doesn't include the latest firmware, but there's another post containing that in the C2 forum somewhere. FYI, I'm on 3.01.0000 HBOOT and I received the final OTA for the One S, so it figures that's the final HBOOT.

can you upload some photos please

3.19.401.101 isn't latest official, better rebase it to patched 401.102 since they fixed some stuff there and it has better battery life.

kymo963 said:
can you upload some photos please
Click to expand...
Click to collapse
It looks the same as stock because all the changes are underlying. So screenshots are kinda pointless
rasputyn said:
3.19.401.101 isn't latest official, better rebase it to patched 401.102 since they fixed some stuff there and it has better battery life.
Click to expand...
Click to collapse
Are you sure? I've never heard of that software version, nor have I received that OTA on my Europe One S. Do you have a link?
Sent from my HTC One S using xda premium

thnx for your reply , is there arabic language in the keyboard input ?

x ZackehSoul said:
Are you sure? I've never heard of that software version, nor have I received that OTA on my Europe One S. Do you have a link?
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Filename is OTA_VILLEC2_U_JB_45_S_HTC_Europe_3.19.401.102-3.19.401.101_release_3144222whp2yijedog4vr9.zip
It exists only in form of 24MB patch. I'll edit post when I upload it.

rasputyn said:
Filename is OTA_VILLEC2_U_JB_45_S_HTC_Europe_3.19.401.102-3.19.401.101_release_3144222whp2yijedog4vr9.zip
It exists only in form of 24MB patch. I'll edit post when I upload it.
Click to expand...
Click to collapse
i think this what you talk about
http://pan.baidu.com/share/link?shareid=393100&uk=623788919

kymo963 said:
i think this what you talk about
http://pan.baidu.com/share/link?shareid=393100&uk=623788919
Click to expand...
Click to collapse
Yes but link is painfully slow, I'm uploading to mediafire. I don't know why other EU users haven't received it.
EDIT:
http://www.mediafire.com/download/b...19.401.101_release_3144222whp2yijedog4vr9.zip

my Cid T-MOB004 and im S-off and my JB software number : 3.17.113.102 how can i updated to 3.19.401.102 stock ? im not rooted

kymo963 said:
my Cid T-MOB004 and im S-off and my JB software number : 3.17.113.102 how can i updated to 3.19.401.102 stock ? im not rooted
Click to expand...
Click to collapse
Why you people don't use Q&A forum for asking this questions? Stop hijacking threads with questions like this - it's arrogant, lazy and impolite.
If you are T-MOB004 you can run European 2.15 RUU which will update you to latest 4.0.4 release and change your CID to HTC_032 and then you'll have option to OTA flash 4.1.1. Don't forget to lock bootloader before running RUU.
http://androidfiles.org/ruu/getdown....02U_16.09.20.11_M2_release_286571_signed.exe

kymo963 said:
thnx for your reply , is there arabic language in the keyboard input ?
Click to expand...
Click to collapse
It's based of the Europe update, so no - but you should be able to plug in that language pretty easily (I think).
rasputyn said:
Filename is OTA_VILLEC2_U_JB_45_S_HTC_Europe_3.19.401.102-3.19.401.101_release_3144222whp2yijedog4vr9.zip
It exists only in form of 24MB patch. I'll edit post when I upload it.
Click to expand...
Click to collapse
Ok, weird because I just reverted to complete stock and it wasn't suggested. Must be a specific part of Europe it was designed for, let me take a look
Edit 1: the OTA is in patch form (as in it gets integrated to the current files instead of replacing), so unless I get the chance to install it onto my device and so on I can't do anything about it. I might do it when I get the chance though
Edit 2: Looking at the files it doesn't seem that anything major was patched, and in terms of battery life I can get 36 hours + on this as it is - you might want to try the Bulletproof kernel as well if you're not satisfied

x ZackehSoul x said:
Ok, weird because I just reverted to complete stock and it wasn't suggested. Must be a specific part of Europe it was designed for, let me take a look
Click to expand...
Click to collapse
Well, I was supercid when receiving that update. Maybe it's a test update since it doesn't come up on fotadl.htc.com site when pasting direct zip file name.

rasputyn said:
Well, I was supercid when receiving that update. Maybe it's a test update since it doesn't come up on fotadl.htc.com site when pasting direct zip file name.
Click to expand...
Click to collapse
Ah ok, might leave it out for now then. I just tried and I get 3.19.401.101 as my highest available.

can add vietnam language??? lpzzzzzzzzz

The HTC Sync Manager says after installing this:
"Device Locked" Unable to recognize your device because the device is locked. Please unlock the device and then reconnect your device.
USB debugging is enabled and the screen is unlocked.
I know most of you probably don't use the sync manager, but I would like to import my ITunes playlists and I don't know any other way.
Can the Sync manager be made to work with this? Is it even related to this ROM?
EDIT: okay, I disabled USB debugging and the sync manager recognized the phone

I think this is best ROM for one S, for everyone who wants excellent battery life, when you install ROM turn on Power saver on, and enjoy. Thank you ZackehSoul for sharing this rom

Using this as my daily driver now with liberty kernel. Thanks.
Sent from my HTC One S using xda app-developers app