Setcpu setting for sensation? - HTC Sensation

I have setcpu and don't know which setting to use. Help?
Sent from my HTC Sensation 4G using xda premium

Set CPU is going to help you overclock your CPU but do a little research on your device and kernel you have to know what the max settings would be for your particular situation. if your running a stock kernel you won't be able to overclock
Rule of thumb stick to 1.5 GHz as your max so is to not cause any damage to your phone.

Ohh. So if I use bricked kernel with setcpu I can go up to the max on setcpu?
Sent from my HTC Sensation 4G using xda premium

pranker98 said:
Ohh. So if I use bricked kernel with setcpu I can go up to the max on setcpu?
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
Yes sir you can also use oc daemon which is most commonly used. It's simple and easier to use
Sent from my HTC Sensation Z710e using XDA App

Related

What's the best kernal for ics virtuous?

I want my bench mark to reach at least 1.5 ghz
Sent from my HTC Sensation Z710e using XDA
dealad said:
I want my bench mark to reach at least 1.5 ghz
Sent from my HTC Sensation Z710e using XDA
Click to expand...
Click to collapse
Hi, I use Sebastian kernel (1836 Mhz) and it's great
Using Sebastian Kernels since I rooted my normal Sensation about a month ago and never had any problems. So big thanks to Sebastian. Always used 1.5 GHz version as I don't intend to kill my phone .
Thanks, while using it at 1.5 ghz do you notice a reduced battery life?
And does flashing a kernel delete my from. Will I need to back up my existing one?
Sent from my HTC Sensation Z710e using XDA
Rom*
Sent from my HTC Sensation Z710e using XDA
dealad said:
Thanks, while using it at 1.5 ghz do you notice a reduced battery life?
And does flashing a kernel delete my from. Will I need to back up my existing one?
Sent from my HTC Sensation Z710e using XDA
Click to expand...
Click to collapse
Does not delete rom, this continues as before.
I use SebFM also, clocked to 1.78GHz, I have about 1-2% battery drain per hour when not in use.
thanks for the help, however I have used the kernel at 1.5 ghz, and after about 10 miuntes it lags out. any ideas?
dealad said:
thanks for the help, however I have used the kernel at 1.5 ghz, and after about 10 miuntes it lags out. any ideas?
Click to expand...
Click to collapse
Did you wiped davlink cache ?
Press thanks if I helped you. Thx

Over clock question

I've noticed every time I go to over clock .. its in mhz ... I'm coming from lg which was all in ghz ... how do I know where to set my phone .. I've also noticed if I try to oc at the highest it freezes my phone ...any insight is welcomed
Sent from my Inspire 4G using XDA
first of all what rom and the reason it freezes is because your phone can't handle that high of OC.
Sent from my SGH-I777 using Tapatalk 2 Beta-5
Nick281051 said:
first of all what rom and the reason it freezes is because your phone can't handle that high of OC.
Sent from my SGH-I777 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
PrimoS 3.5 is the Rom I'm using
Sent from my HTC Inspire 4G using XDA
JReeher said:
PrimoS 3.5 is the Rom I'm using
Sent from my HTC Inspire 4G using XDA
Click to expand...
Click to collapse
1000Mhz=1Ghz so just do the math & you'll figure out where u need to set it & as Nick said, if u oc higher than ur phone can handle it's gonna freeze up so lower the oc. Every device handles oc'ing & undervolting differently & can even vary from ROM to ROM how high u can oc stabily
HTCinspiration said:
1000Mhz=1Ghz so just do the math & you'll figure out where u need to set it & as Nick said, if u oc higher than ur phone can handle it's gonna freeze up so lower the oc. Every device handles oc'ing & undervolting differently & can even vary from ROM to ROM how high u can oc stabily
Click to expand...
Click to collapse
Thank you !!
Sent from my HTC Inspire 4G using XDA

Built I Rom control with kernel

Why would you use a aftermarket kernel if your custom Rom has built in under and overclocking from 192 MHz to 1.728 GHz.what are the benefits of running a kernel with a Rom like this?
Sent from my HTC Sensation 4G using XDA
Didn't you just ask this very same question yesterday? PLEASE stop spamming the forum.
No I didnt.
Sent from my HTC Sensation 4G using XDA
I think it's just a matter of personal perfrence. What you like and what you want. Hope this helps you.
Sent from my HTC Sensation 4G using xda premium
DLittle2012 said:
Why would you use a aftermarket kernel if your custom Rom has built in under and overclocking from 192 MHz to 1.728 GHz.what are the benefits of running a kernel with a Rom like this?
Sent from my HTC Sensation 4G using XDA
Click to expand...
Click to collapse
Just to clarify, these custom ROMs with "built in" over and underclocking are using the very same "aftermarket" kernels you're talking about. If the ROM chefs didn't include these kernels into their ROMs, then you would only have the stock 384-1188 MHz range available.
And like it was said earlier, people like different things. I was using Bricked last week, but now I'm on Faux. It's a matter of preference.
DLittle2012 said:
Why would you use a aftermarket kernel if your custom Rom has built in under and overclocking from 192 MHz to 1.728 GHz.what are the benefits of running a kernel with a Rom like this?
Sent from my HTC Sensation 4G using XDA
Click to expand...
Click to collapse
It is completely up to you as stated above but personally I don't overclock st all anymore, just no need. I never really notice a difference except for in battery life. There is a kernel floating around somewhere in the dev section which has an option of running on one core at 1.5ghz permanently, no matter what and if you want to go for battery life I'd chose that.
Sent from my HTC Sensation using XDA

Open sensation problem

I am currently on open sensation rom and loving it.But its CPU frequency is set to 1.5 ghz by default.I want to change it back to 1.2 ghz.I changed it to 1.2 in settings under the performance tab.But after sometime it automatically goes back to 1.5ghz.does anybody know a solution for this.thanx.
Sent from my HTC Sensation using xda app-developers app
cuscrea years
nuwanmw1988 said:
I am currently on open sensation rom and loving it.But its CPU frequency is set to 1.5 ghz by default.I want to change it back to 1.2 ghz.I changed it to 1.2 in settings under the performance tab.But after sometime it automatically goes back to 1.5ghz.does anybody know a solution for this.thanx.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
did you click on "set on boot" option?
dileepm29 said:
did you click on "set on boot" option?
Click to expand...
Click to collapse
Yes.I have ticked it.after a reboot it holds 1.2 for about two minutes.after that it goes back to 1.5
Sent from my HTC Sensation using xda app-developers app
i just checked in my sensation running on open sensation.There is no such problem for me.Try the same using setcpu or system tuner.
dileepm29 said:
i just checked in my sensation running on open sensation.There is no such problem for me.Try the same using setcpu or system tuner.
Click to expand...
Click to collapse
Thanx for the reply...I flashed the rom again.still the problem persists.I tried using set CPU also.but no luck.
Sent from my HTC Sensation using xda app-developers app

Gpu frequency

Hi everybody. I have a problem with my One S 3D gpu frequency. It's locked on 128 Mhz and I can't change it. I tried elementalx and bulletproof and bricked kernel but no change. I use kernel tuner app to change it but nothing happened. I'm using trickdroid 10.2.6. I just want to run it at stock clock(400Mhz). Sry for bad english.
Sent from my HTC One S using xda premium
No answer????
Sent from my HTC One S using xda premium
In kernel tuner go to options untick start up at boot, restart your phone and change the settings back after and do not touch the gpu frequency it's borked.
Are you sure HTC ONE S stock clock is 400? Isnt it 225? OR I am wrong?
iiigeorgievi said:
Are you sure HTC ONE S stock clock is 400? Isnt it 225? OR I am wrong?
Click to expand...
Click to collapse
It's adreno 225 and 3D frequency is 400 mhz without overclock and 512 with overclock.
Sent from my HTC One S using xda premium
I found it. In sys devices platform kgsl3D kgsl kgsl3D pwrscale trustzone governor must change to performance.
Sent from my HTC One S using xda premium

Categories

Resources