Database Info

[Q] Case input

I've been searching the net for a hard case for my i9000m (currently in for repairs..)
I have looked at a few and these peak my interest, but I would like your input on what to buy and it doesn't have to be from something I post.
Here they are:
Case-Mate Tough
and
Anycall Punch Mesh Case
Thanks for your opinions!

About the Anycall Mesh case: it's nice and cool, doesn't add too much thickness to your phone but... it does not protect well. I am using mine about 2 months and it already cracked (not completly, some small piece in the upper left side had broken). It's still usable, but imo it's not very durable (i'm very careful about my phone). I'm looking for something with more protection, but I fear there will be nothing that stylish

How about any kickstand cases that have a lip on the front to prevent screen damage?

Problems with some hard cases is it might damage the color on the edges and most of them doesn't protect the upper top and bottom of the phone, so its not 100% protection.
But you have a good choice with a combination of hard and soft material in single case. The inside of the case that which comes in contact of the phone's body is rubber (silicon) and outside has a good hard fibre. Might be bit expensive but great value for money and protection of phone.
Otterbox cases

this is another case from Casemate,
http://www.case-mate.com/Samsung-Ga...axy-S-T-Mobile-Vibrant-Barely-There-Cases.asp
It is cheap as compare to other cases but it is good product.
I am using it from last 6 months.

where can I buy an otterbox? havent found a dealer yet. live in germany.
please help ^^

Otterbox online
memamu said:
where can I buy an otterbox? havent found a dealer yet. live in germany.
please help ^^
Click to expand...
Click to collapse
Last time I ordered I just ordered it online from the US - delivery was pretty quick...
http://www.otterbox.com/Samsung-Gal..._color=20&start=1&cgid=samsung-galaxy-s-cases

This one is 2 bucks, and kicks ass, I ordered it for building a custom car mount but it would make a great hardcase as well, adds very little to the size of the phone.
http://cgi.ebay.ca/ws/eBayISAPI.dll...10544&ssPageName=STRK:MEWNX:IT#ht_3822wt_1002

canuck82 said:
Last time I ordered I just ordered it online from the US - delivery was pretty quick...
http://www.otterbox.com/Samsung-Gal..._color=20&start=1&cgid=samsung-galaxy-s-cases
Click to expand...
Click to collapse
I tried to order one but I get an error message when i try to submit my order. The customer support has not answered to my complains yet.
I found a dealer in germany but they start to deliver the boxes at the end of january. I mean the END OF JANUARY... I'm not sure I can wait that long...

I use the Case-mate Tough case.
Works great, I feel my phone is pretty safe from being in my pocket and possible drops.
It comes with a soft rubber layer case and a hard case for protection.
My only issue is that to me I can be pressing the power button on the side, without realising it sometimes.
Overall I highly reccomend it.

Buy This awesome kickstand case dude!
http://cgi.ebay.com/galaxy-s-I9000-STANDING-CASE-Protection-Film-BLACK-/180556528903?pt=PDA_Accessories&hash=item2a0a01fd07
This is the only case i use as it so awesome!
The Hinge is made of metal and i have been using it for half a year now and it hasn't shown any sign of weakness.

Has anyone used otterbox for galaxy s? would like to hear feedback. thanks!

greedandenvy said:
Has anyone used otterbox for galaxy s? would like to hear feedback. thanks!
Click to expand...
Click to collapse
I ordered mine two days ago and go it two minutes ago. It fits perfect and gives a secure feeling right from the start. And it looks cool. Would you like to know more?

It's a compromise.
The thicker the case, the more cumbersome it becomes, but the better protection it offers.
The thinner the case, the slimmer and lighter the phone is, but the less protection it offers.
I keep my phone in my jeans pocket, so a thick case like otterbox is completely unacceptable to me. Currently I am using a SGS leather flip open case. http://www.exportprive.com/advanced...escription=0&keywords=galaxy S&sort=2a&page=4

memamu said:
I ordered mine two days ago and go it two minutes ago. It fits perfect and gives a secure feeling right from the start. And it looks cool. Would you like to know more?
Click to expand...
Click to collapse
Yeah, amazing protection on mine as well. only drawback is that the screen protector does not protect the entire screen and misses a lot of the buttons on the bottom.

I use a screen protector by 3M. The Vikuiti DQC-160.

Slim case

I love the design of this phone so I want the slimmest possible case I can find. Can anyone recommend a very slim case?

same as you, didn't really want to cover it up too much since the design is so nice. I went with this and I think it will be a good match. I have the white phone so I ordered the white case:
http://www.obostore.com/nillkin-ultra-slim-hard-shield-faceplate-for-htc-one-x-p-5711.html

lots of folks recommended this one http://www.amazon.com/gp/product/B007X4XS3C/ref=oh_details_o00_s00_i00
I ordered it and it will be here Tuesday

You could get the official ones by HTC. They take minimalism to a whole new level bit the downside is its so expensive for a flimy piece of plastic. Or the feather cases by Incipio.
Sent from my HTC One X using XDA

i ordered the black & gray ROCK cases and the case mate barely there case. the ROCK cases look nice but are definitely made for the International X. although they fit the One XL, the camera opening is about1-2 mm lower at the top. not a big issue for me at all. however, the case-mate fits perfectly and looks best! i like how the sides are angled for a perfect fit, e.g., fits the One XL's angled sides like a glove. the obvious downside is the limited protection, e.g., exposed top and bottom.
i sold both ROCK cases to a friend who has the International X and kept the case-mate. i added a couple of pics that (hopefully) show how slim and form-fitting the case-mate case is...

im going with the amzer tpu luxe arigle case had it with captivate and like it and did its job and looks good

lucidlyseen said:
same as you, didn't really want to cover it up too much since the design is so nice. I went with this and I think it will be a good match. I have the white phone so I ordered the white case:
http://www.obostore.com/nillkin-ultra-slim-hard-shield-faceplate-for-htc-one-x-p-5711.html
Click to expand...
Click to collapse
Has anyone gotten one of these yet? Looks nice, I like the texture on the back. I've never heard of this site, reputable?
I got this Speck case from the AT&T store when I bought my phone. I hated it in 2 days. It's way too thick, makes the phone huge and heavy.
http://forum.xda-developers.com/showthread.php?t=1653829

I haven't gotten it yet, but I did get a shipment email the next day, so it looks like they are on the ball. I'll post impressions when I get it, should be in a few days...
Valitri said:
Has anyone gotten one of these yet? Looks nice, I like the texture on the back. I've never heard of this site, reputable?
I got this Speck case from the AT&T store when I bought my phone. I hated it in 2 days. It's way too thick, makes the phone huge and heavy.
http://forum.xda-developers.com/showthread.php?t=1653829
Click to expand...
Click to collapse

dylando808 said:
You could get the official ones by HTC. They take minimalism to a whole new level bit the downside is its so expensive for a flimy piece of plastic. Or the feather cases by Incipio.
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
I liked the case for the whole 5 seconds it lasted me
Funny part is that I was planning on spray painting it black cos that case only comes in orange/blue. And while i was taking the case off it snapped on me. Good thing is AT&T warranties out accessories for a whole year. I have a feeling im going to be using that warranty a lot.
You get what you ask for looking for a slim case. They don't offer any protection at all. Which for me is fine. I just don't like how hot the phone gets without a case. I ended up getting the full body zagg.

chivamex10 said:
I liked the case for the whole 5 seconds it lasted me
.
Click to expand...
Click to collapse
i broke my orange version of this case too. if you like to swap out cases every other day (like me) this case may not be for you because you will eventually break it, no doubt about it. i've been luckier with my blue case as it hasn't snapped on me yet.

Just ordered an Amzer Shellster case found here:
http://www.amazon.com/Amzer-AMZ9380...PA1Y/ref=sr_1_1?ie=UTF8&qid=1338902558&sr=8-1
It's not the most "minimalist" case out there but it seems sturdy enough for repeated application and removal (which is important to me since I use multiple cases). It also comes with a holster, which most slim cases do not. It also looks like it offers great protection for the camera.
http://www.youtube.com/watch?v=kMdD2Q35_XA
I'll put up some pics and do a "mini-review" if anyone is interested.

So the case-mate barely there doesn't specify on amazon whether its for the international or att version. However I have heard that it fits ours just fine. Can anyone verify?
And also does it come with a screen protector?
Sent from my HTC One X using XDA

Received my Amzer Shellster yesterday. I can confirm that it fits the AT&T version of the HOX.
Pros
Accurate Fit
Cutouts line up perfectly
Protects camera
Front lip keeps screen from touching when face down
Comes with a holster
Cons
Minamilistic case means it provides less protection than traditional cases
Does not cover top and bottom
Soft touch finish can be a little slippery
While the holster uses "pressure" to hold the phone it does not have an actual mechanism to secure it
Overall, the case is really nice for what it's meant to do. It is advertised as a slim case and it provides all the protection that it entails.
I have included some pics in the attachments showing the cutouts and fit, as well as the holster and front lip.

I got the case mate barely there. Overall I really like it, I wish it was a little thicker because the camera still sticks out a little.
http://www.amazon.com/Case-Mate-CM0...=wireless&ie=UTF8&qid=1339078007&sr=1-1-spell

Essien said:
I got the case mate barely there. Overall I really like it, I wish it was a little thicker because the camera still sticks out a little.
http://www.amazon.com/Case-Mate-CM0...=wireless&ie=UTF8&qid=1339078007&sr=1-1-spell
Click to expand...
Click to collapse
Purchased this as well. Very small and seems to do the trick. I wish it had a stand though.

I recommend the cruzerlite. Only $10
Sent from my HTC One X using Tapatalk 2

I found something that will look sleek for my new phone. I was looking into cases, and this Ultra Thin just caught my attention. Placed in my order from Cretouch store. The price is decent and they offer free shipping too!

ravegrace23 said:
I found something that will look sleek for my new phone. I was looking into cases, and this Ultra Thin just caught my attention. Placed in my order from Cretouch store. The price is decent and they offer free shipping too!
Click to expand...
Click to collapse
Are you talking about this?
http://www.spigen.com/cell-phone/htc/one-x/htc-one-x-ultra-thin-air-series.html
"Will the Ultra Thin Air fit the AT&T version of the HTC One X?
We don't recommend the Ultra Thin Air with the AT&T version as this case was originally designed for the international version. The AT&T version of the phone is slightly longer. While the case my be compatible, it may not be a perfect fit."

live4nyy said:
Received my Amzer Shellster yesterday. I can confirm that it fits the AT&T version of the HOX.
Pros
Accurate Fit
Cutouts line up perfectly
Protects camera
Front lip keeps screen from touching when face down
Comes with a holster
Cons
Minamilistic case means it provides less protection than traditional cases
Does not cover top and bottom
Soft touch finish can be a little slippery
While the holster uses "pressure" to hold the phone it does not have an actual mechanism to secure it
Overall, the case is really nice for what it's meant to do. It is advertised as a slim case and it provides all the protection that it entails.
I have included some pics in the attachments showing the cutouts and fit, as well as the holster and front lip.
Click to expand...
Click to collapse
Thanks for the pics and review. How long did shipping take? Your review should have its own thread, those photos and review is great.
Plus was it really only $14.99?
http://www.amzer.com/Amzer-Shellster-Black-P93808.htm

nuprotocol said:
Thanks for the pics and review. How long did shipping take? Your review should have its own thread, those photos and review is great.
Plus was it really only $14.99?
http://www.amzer.com/Amzer-Shellster-Black-P93808.htm
Click to expand...
Click to collapse
You're welcome . Shipping was pretty fast, I bought the one that is "sold and shipped" by Amazon. And yeah, I got it for $14.99.

S4 spigen Slim Armor Case

Got my phone on Wednesday of last week, ordered these cases and they came Saturday. So far I'm really happy with the case, as is my wife with hers.

kryptoniteguy said:
Got my phone on Wednesday of last week, ordered these cases and they came Saturday. So far I'm really happy with the case, as is my wife with hers.
Click to expand...
Click to collapse
I just got mine last night. Pretty happy with it as well. Big plus that it has the port to let the TV antenna extend.

evildave_666 said:
I just got mine last night. Pretty happy with it as well. Big plus that it has the port to let the TV antenna extend.
Click to expand...
Click to collapse
What port is that.. where is the TV antenna?

kryptoniteguy said:
What port is that.. where is the TV antenna?
Click to expand...
Click to collapse
Upper right corner, for japanese terestrial TV.

evildave_666 said:
Upper right corner, for japanese terestrial TV.
Click to expand...
Click to collapse
Hmmm... Mine doesn't have that.. kinda glad it doesn't...

kryptoniteguy said:
Hmmm... Mine doesn't have that.. kinda glad it doesn't...
Click to expand...
Click to collapse
They must have a second model for Japan/Korea.
This one isn't so bad, the case is thick enough and the port recessed enough that you can't damage the phone even if it lands directly on the port. (Unlike the case on my S II which the one time I dropped it magically aligned to come down perfectly on the antenna corner)

size comparison
would anyone happen to know if this case or the Neo Hybrid case is bigger or not? I have the neo hybrid and I plan on getting a smaller slimmer case if there is any out there. Curious to see if the slim armor is it.
TIA

i just ordered one of these cases last night. got it in white. also got the nano screen protector. should be protected pretty good

Im thinking of ordering the blue one but how is it with getting scratches on the back?
Sent from my SGH-M919 using Tapatalk 2

The Slim Armor is thicker then the Neo Hybrid. The frame around the sides of the phone are not much different but the Slim Armor does add more to the back of the phone.

I have the blue version. It hasn't seemed to pick up any severe scratching to this point.
Goes reasonably well with the Blue Arctic phone color.

probablecauz69 said:
i just ordered one of these cases last night. got it in white. also got the nano screen protector. should be protected pretty good
Click to expand...
Click to collapse
The Spigen screen protectors are the best, can't go wrong with them.

unciviilized said:
Im thinking of ordering the blue one but how is it with getting scratches on the back?
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
On mine, the Metal slate one, I have noticed where the edges bend up are getting small hairline scratches. When I looked at my wife's blue one, it didn't look to have any scratches, but she's a lot more careful with hers, mine sits on a hard desk all day long.

kryptoniteguy said:
On mine, the Metal slate one, I have noticed where the edges bend up are getting small hairline scratches. When I looked at my wife's blue one, it didn't look to have any scratches, but she's a lot more careful with hers, mine sits on a hard desk all day long.
Click to expand...
Click to collapse
I had the metal slate for my iPhone 5 and that thing got scratched up easily just by being in my pockets and placed on tables. I never even dropped it.
Sent from my Galaxy S4

killerxmic said:
would anyone happen to know if this case or the Neo Hybrid case is bigger or not? I have the neo hybrid and I plan on getting a smaller slimmer case if there is any out there. Curious to see if the slim armor is it.
TIA
Click to expand...
Click to collapse
i had the neo hybrid as well and didnt like it so i ordered this, so far i love this doesnt add too much bulk its not maximum protection but protects the edges and the back.
http://www.amazon.com/Samsung-Galax...qid=1371824688&sr=8-1&keywords=ringke+slim+s4

i don't know if anyone's mentioned this already, but i just came across what i think are the knockoff versions of the slim armor case:

I got the limited edition GlasT and Black Slim Armor about two weeks ago and I have to say it's really nice but I ordered it direct from the company instead of Amazon just because of the deal. $40.00 free shipping for the both of them and yes the glass adds a little weight to it but "worth every penny", I've never had a screen protector that felt this good and without flaws.
Great investment.

Short Review: Diztronic Full Matte TPU Case

I used a Diztronic TPU on my Galaxy Note 3 so I was very happy to see a preorder on Diztronic's website for a full matte version for the Note 4. I preordered on Nov.16 and received the case on Saturday.
My impressions of this case are very positive. The case is slim and fits the phone nicely. Mine shows no bulging or loose edges. The matte TPU does provide some screen standoff on the front side. I measured this at 0.75mm. Mic, headphone, USB and pen holes align nicely and the buttons retain a nice tactile feel with this case. I use a Verizon Note 4 and can confirm that the case I received DOES have a slotted left side mic opening to support the Verizon Note 4. The button covers are molded into the TPU but have pronounced edges, so they are easy to find without having to look at the phone.
I use the YooTech wireless charging receiver insert and the Diztronic TPU fits nicely with this receiver in place. I do not believe it would fit with the factory wireless charging back as the case fits perfectly to the stock phone. The case does have a small raised ridge around the camera lens and small ridges around the speaker. This gives some protection for the camera lens and keeps the case from "sealing" against the table and muting your notification tones. The area around the flash is open and I am able to very reliably get heart rate readings for S Health, something that isn't easily found with many thicker cases.
The TPU material is quite thin. Diztronic's website says 1.6mm and my measurements seem in line with that number. The case does not add much bulk and for sure feels slimmer in the hand all-around when compared to the Spigen Slim Armor I had been using since I got the phone. I'm sure it won't provide the kind of protection that the Slim Armor does, as the cushioning material is thinner, but it sure does feel nice in the hand while offering some level of protection over a bare phone.
One of the things I really like about this case is the matte finished TPU. It feels smooth and slick in hand and does not show much in the way of fingerprints. The matte finish slides easily in/out of your pocket. Diztronic made a good move by relocating their branding to the side of the case, which adds a little bit of grip and keeps the look super clean overall.
Overall, I'm really impressed with the Diztronic Full Matte TPU case for Note 4. It provides some protection for the phone and is a little more grippy in-hand than the bare phone. I like that the screen stands off a bit and the camera lens is somewhat protected. I also appreciate that the full matte finish doesn't collect pocket lint or gunk and doesn't show much in the way of fingerprints. And it looks classy!
I really like the Note 4 as a caseless device. It feels very slim for its size and feels great. Unfortunately, I know I am going to inevitably drop it at some point and want some protection without making the phone too bulky, which is really easy to do. The Diztronic Full Matte TPU feels like it hits that sweet spot for me. Time will tell, but for now I give it two solid thumbs up.
:good: :good:
I purchased this case direct from Diztronic: LINK I expect they will probably be available via Amazon shortly. They are currently showing as available on Diztronic's website in both matte black and matte grey.
Updated to include Verizon mic confirmation and pics attached.

Does it have an elongated mic opening for Verizon users? This is the case I've been waiting for...always a favorite.

Absolutely loved mine for my previous phone. Best TPU cases imo. Looking forward to seeing your pics.
I'll probably pick one up even though I might opt for a more protective case this time around.
|> transmitted from deep inside a Verizon Note 4 <|

nateinva said:
Does it have an elongated mic opening for Verizon users? This is the case I've been waiting for...always a favorite.
Click to expand...
Click to collapse
THIS i need to know whether or not to buy lol

nateinva said:
Does it have an elongated mic opening for Verizon users? This is the case I've been waiting for...always a favorite.
Click to expand...
Click to collapse
oneandroidnut said:
THIS i need to know whether or not to buy lol
Click to expand...
Click to collapse
Yes, my apologies - I thought I had called that out but must have lost it when editing. The Diztronic Matte TPU DOES have a slot shaped opening which supports Verizon Note 4. My Verizon Note 4 is shown in the pics I've added above.

Ducaticorse said:
Yes, my apologies - I thought I had called that out but must have lost it when editing. The Diztronic Matte TPU DOES have a slot shaped opening which supports Verizon Note 4. My Verizon Note 4 is shown in the pics I've added above.
Click to expand...
Click to collapse
alright cool thanks im ordering one!!

I have updated the original post with pics and confirmation regarding the mic opening and the VZ Note 4. I realized I mentioned this in another case thread but originally failed to include it here.

Ducaticorse said:
I have updated the original post with pics and confirmation regarding the mic opening and the VZ Note 4. I realized I mentioned this in another case thread but originally failed to include it here.
Click to expand...
Click to collapse
Thanks for the update! I just ordered one. I've had a Diztronic case for my last 3 phones and have been happy with all of them. I'm sure this one will be no different.

thanks for the review! i've always been iffy with diztronic, yet i seem to get one per each phone i have just to have one lol..
out of all the TPU's i use, they're always the most bulky which i dislike, because i like them thin..but there's NO good note 4 tpu's out there whatsoever. i'm currently using a clear S line TPU, which is good and all, but the mic holes don't line up perfect, and it doesn't fit as well as it could..plus it's clear, and we all know clear starts looking like crap after a few weeks. i've gotten like 4 other TPU's and shell cases and I hate all of them.
diztronic is nice because they do a lip around the camera, which NO tpu's are doing right now, which means your camera is pretty much flush against the surface which i hate...and they also have two little bumps by the speaker to elevate the speaker off the table so it's not muffled! FINALLY, a TPU maker with some sense knocked into em!
either way, i ordered the gunmetal gray because every diztronic i ever got was always black, so i'm looking for a nice change. ordered today, they say those ship out tomorrow the 26th, so maybe I'll get it by saturday or monday with thanksgiving coming up and all. this will be like my 6th or 7th case already for the Note and I've only been using 1 lol

Does it fit with the OEM Qi back?

jayochs said:
out of all the TPU's i use, they're always the most bulky which i dislike, because i like them thin..but there's NO good note 4 tpu's out there whatsoever. i'm currently using a clear S line TPU, which is good and all, but the mic holes don't line up perfect, and it doesn't fit as well as it could..plus it's clear, and we all know clear starts looking like crap after a few weeks. i've gotten like 4 other TPU's and shell cases and I hate all of them.
Click to expand...
Click to collapse
I don't find the Diztronic bulky at all. The Diztronic for the Note3 was very rounded feeling, where the Note 4 Diztronic is more squared off and edgy, just like the Note 4 itself. I think you'll like it and the holes line up nicely as pictured above.
Flame Red said:
Does it fit with the OEM Qi back?
Click to expand...
Click to collapse
As noted in my review, I do not believe it would fit with the OEM back. I say this because it fits relatively snug as-is with the stock back or stock back + thin Qi receiver. But I don't have an OEM Qi back to try it with.

My black one is scheduled to deliver on Saturday. I will post my thoughts at that time. Not like anyone cares.

WizeGuyDezignz said:
My black one is scheduled to deliver on Saturday. I will post my thoughts at that time. Not like anyone cares.
Click to expand...
Click to collapse
oh hey lagbuddy lol saw you randomly around here, glad to see you're still stalking me and getting every device i get haha
but yeah, my gunmetal gray one is coming saturday! you know what's sad? this one wasn't even out, it was a pre-order, and i'm STILL getting it quicker than this nillkin bumper case i ordered on ebay from Nov 11th. it's from china, yet it's still not here yet. other chinese orders i've gotten took a week, maybe 1.5 weeks. it's over 2 weeks now for this stupid thing and i doubt i'll see it before the diztronic lol

jayochs said:
oh hey lagbuddy lol saw you randomly around here, glad to see you're still stalking me and getting every device i get haha
but yeah, my gunmetal gray one is coming saturday! you know what's sad? this one wasn't even out, it was a pre-order, and i'm STILL getting it quicker than this nillkin bumper case i ordered on ebay from Nov 11th. it's from china, yet it's still not here yet. other chinese orders i've gotten took a week, maybe 1.5 weeks. it's over 2 weeks now for this stupid thing and i doubt i'll see it before the diztronic lol
Click to expand...
Click to collapse
Haha, what's up brother? I really liked my diztronic on my laggy as hell S4.
So I'm hoping to like this one as well. Good luck bro!

Diztronic makes the best TPU cases as far as I'm concerned. I was disappointed when they had to delay the release due to the Verizon mic hole revelation, and ended up going with a UAG case, but anybody looking for a great case for under 10 bucks, this is what you want. I might even pick one up for myself, just in case.

Diztronic is awesome. I had their case on my Note 3, LG G3, and now I'm waiting for the Note 4 case that supports the OEM wireless charging back. They made one for the S5, I really hope they make one for the Note 4!

I ordered mine today. It is only 12 Euro, together with shipping to Ireland, directly from manufacturer's page.
Already have Spigen Capsule and it is great, but flat buttons and flat speaker hole are not perfect for me. Diztronic seems to meet all my requirements. Hope it will appear to be true

Uploaded some extra pics to imgur.
Black Diztronic Note 4

il buono said:
Uploaded some extra pics to imgur.
Black Diztronic Note 4
Click to expand...
Click to collapse
looks good!
Sent from my Samsung Galaxy Note 4 using Tapatalk.

I forgot to post yesterday, but I got my black Diztronic yesterday, a day earlier than estimated. It is the best case I've tried so far, although I haven't tried a lot yet.
The fit is perfect, not too loose or too tight. It adds almost no bulk which I really like. The matte black is awesome and feels great in the hand. Not super grippy, but it will do the job. All of the cutouts are perfect. The camera has enough raise that the lens won't touch a flat surface and the charger fits in without the case interfering. The buttons are also very easy to press, no problems there. In fact, the buttons are easier to press with this case on than without it.
The only thing I noticed is that in a couple areas, the frame moves pretty easily if you pull on it. Especially near the charging port. It doesn't sag at all which is great, but I just wonder if it will become an issue over time. Possibly not but that's the only small thing I've noticed so far.
Other than that, this case is fantastic and blows away any Spigen that makes your phone uneccesarily bulky and for less money.
I do also have an official Samsung protective case coming that is supposed to ship next week. I've heard that's also an amazing case, so I will compare once I get that.
I didn't take any pics of my Diztronic since so many great pics have already been posted. But let me know if you would like to see any.

Thoughts on Spigen cases

I just placed an order for Spigen Neo Hybrid case for my HTC One m9. I was wondering if anyone has experiences with these cases on previous HTC One devices. Also any good recommendations for a tempered glass screen protector would be awesome.

I have the Spigen crystal clear Hybrid on my silver M9 and I love it , But I will be purchasing a more protective case .

plus9paradox said:
I just placed an order for Spigen Neo Hybrid case for my HTC One m9. I was wondering if anyone has experiences with these cases on previous HTC One devices. Also any good recommendations for a tempered glass screen protector would be awesome.
Click to expand...
Click to collapse
I have the Spigen Neo Hybrid Case for my M9.
It fits perfectly and looks awesome on the phone.
it protects the whole back and the sides. In addition it is a bit thicker on the top side (display), so it protects the display too, if you lay down the phone upside down.

SoLdieR9312 said:
I have the Spigen Neo Hybrid Case for my M9.
It fits perfectly and looks awesome on the phone.
it protects the whole back and the sides. In addition it is a bit thicker on the top side (display), so it protects the display too, if you lay down the phone upside down.
Click to expand...
Click to collapse
Thanks, that's exactly what I was hoping for. Which color case did you get/which color m9 do you have?

I have one on order and had one on my nexus 4. Loved it.

SoLdieR9312 said:
I have the Spigen Neo Hybrid Case for my M9.
It fits perfectly and looks awesome on the phone.
it protects the whole back and the sides. In addition it is a bit thicker on the top side (display), so it protects the display too, if you lay down the phone upside down.
Click to expand...
Click to collapse
I have the same case, came in today. I love it.

I think im gonna like this this cover does anybody have a link for me?
i have google it but i see different ones
sorry for my english

I got the spigen neo hybrid for the m9. Looks fantastic and it does add some protection however I feel like it is not enough for everyday use. I will put this case aside for special occasions and will order a UAG case for everyday use

plus9paradox said:
Thanks, that's exactly what I was hoping for. Which color case did you get/which color m9 do you have?
Click to expand...
Click to collapse
I have the gunmetal grey m9 and the champagne gold case.

niekie73 said:
I think im gonna like this this cover does anybody have a link for me?
i have google it but i see different ones
sorry for my english
Click to expand...
Click to collapse
I ordered mine from Spigens official ebay store it was only $20.99 there instead of $34.99. Their ebay account is named "spigen-inc". I ordered it at 2PM CST yesterday and it was shipped out same day.

plus9paradox said:
I ordered mine from Spigens official ebay store it was only $20.99 there instead of $34.99. Their ebay account is named "spigen-inc". I ordered it at 2PM CST yesterday and it was shipped out same day.
Click to expand...
Click to collapse
Thank you found it and ordered it and its allso shipped, :good:

It's entirely plastic, and the power button doesn't have a special texture like the actual phone.

plus9paradox said:
I ordered mine from Spigens official ebay store it was only $20.99 there instead of $34.99. Their ebay account is named "spigen-inc". I ordered it at 2PM CST yesterday and it was shipped out same day.
Click to expand...
Click to collapse
Got mine through Amazon Prime for $21.00. It's a nice case, but it's temporary until I can get a SEIDO OBEX once they are available.

Could any owners of the neo hybrid chime in on the button stiffness of the case? I find that I'm accidentally hitting the power button pretty frequently without a case.

goffmj said:
Could any owners of the neo hybrid chime in on the button stiffness of the case? I find that I'm accidentally hitting the power button pretty frequently without a case.
Click to expand...
Click to collapse
I have the Neo Hybrid and love the hell out of it. I have the gunmetal M9 with the gunmetal case
The buttons are a bit stiffer but I still find that I hit it anyways. The location will take some time getting used to as I'm coming from the M7. BY FAR, THE BEST CASE I'VE SEEN AND FELT ON A PHONE!
Any other questions, feel free....

I got Spigen Thin Fit off ebay uk for £6.99 + delivery. It fits well and helps stop you hitting the power button by accident when you pick it up.
I have the silver M8 but got the Gunmetal one. It looks pretty good. Small lip on the left and the right. Only good for small drops directly on the back, front and sides, but very minimal.

METALLICAM said:
I have the Neo Hybrid and love the hell out of it. I have the gunmetal M9 with the gunmetal case
The buttons are a bit stiffer but I still find that I hit it anyways. The location will take some time getting used to as I'm coming from the M7. BY FAR, THE BEST CASE I'VE SEEN AND FELT ON A PHONE!
Any other questions, feel free....
Click to expand...
Click to collapse
this case is awesome its bulky and not bulky at the sametime - in fact, this case is just slightly larger than their crystal clear series, and because of the fact that this phone is still only 5", with the slight bulkiness, it actually makes the phone larger in presentation; a very good thing, the metalized buttons has very very good feedback, its easy to press (once applied on correctly) - everything fits just right! even better than their crystal clear series. - i got the black n gold. looks amazing.
@METALLICAM - the reason why you're saying the outer metalized buttons are hard to press is probably because you do not have the outer ring and the rubber case fitted correctly (this took me a few mins to figure out) because when you slap on the ring around it, it feels and looks like its "tight on" but its actually not, simply hard press/pull from the top of the phone, you'll see that the ring starts to slide-in more into the rubber mounts, and do that with the bottom speaker aswell.

I got both the Spigen Neo Hybrid and Strong-Flex cases and love them both. The strong flex is pretty thin and durable and the neo hybrid is good looking and durable also.
Sent From My HTC One (M9)

My https://www.amazon.com/gp/product/B00TAH000E/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1 comes today!

plus9paradox said:
I just placed an order for Spigen Neo Hybrid case for my HTC One m9. I was wondering if anyone has experiences with these cases on previous HTC One devices. Also any good recommendations for a tempered glass screen protector would be awesome.
Click to expand...
Click to collapse
A little over rated. No doubt they are built to look really cool, but as far as protection goes it's not the best. Also touch wood it doesn't happen to you, but if you have any problems with it, getting through to their returns department is terrible.
Other than the after sales care, their cases are okay, but would recommend trying other brands, there's plenty available at decent prices