[Q] KJ6 Kernel/Simply Simple Beta 1.5 Question - Samsung Galaxy S (4G Model)

Good Morning XDA!
I've been a lurker on these forums for a while, and I've tried every ROM for the S4G that you incredible devs have released. I haven't had any issues that weren't my fault like forgetting to do something or skipping a step in the flashing process....and I'm sure that's all this issue I'm having now is.
BUT...
I just flashed Somairotevoli's Simply Simple Beta 1.5 and while reading the latest comments in that thread, saw someone had success with bhundven's new KJ6 kernel. I went ahead and flashed that, as well and now everything seems to be running just fine EXCEPT..I keep getting a force close window that says
The process android.process.acore has stopped unexpectedly. Please try again.
Can anyone tell me if I did something wrong when flashing through CWM? I was going to post in the Android Dev section, but I don't have enough posts.
Thanks in advance!

That's an issue with my beta. looking into it.
Sent from my SGH-T959V using Tapatalk

I really appreciate all your work, man. It's not causing anything major, I don't think..just random popup. But the new update looks and runs GREAT! Thanks again!

Weird thing is I thought it was gone as I can't reproduce it. if I flash version 1.0, set it up, then flash my beta, it doesn't happen. So maybe data/factory wipe will fix it, but will have issue fixed before next final
Sent a from my SGH-T959V using Tapatalk

I'll reflash and see if that works. Do you suggest flashing the KJ6 kernel again, also, or just your ROM then your beta update?
Last time, I just flashed your ROM, then beta update, then kernel.

Flash ROM, go through setup.flash update, flash kernel. That's what I did
Sent from my SGH-T959V using Tapatalk

I get the same message. My phone crashed when I rooted it and began trying to kill unwanted apps by deleting files. I reflashed with the first thing I could find that seemed close to stock, KB5, Kernel 2.6.32.9. My firmware version is 2.2.1 and since the phone is a little buggy and slightly slower under load than the stock froyo software, I'm trying to reinstall the original o.s. This will also restore any hardware acceleration that was disabled by the alternate build.

Related

[Q] Having issues once flashed to stock via Odin

I flashed to both versions listed on http://forum.xda-developers.com/showthread.php?t=1092021 and am seeing the same issues with both.
The time is 4 hours off, I can uncheck auto-time and check it again and the time will be correct for maybe 5-10 min before returning to 4 hours later.
Everytime I try to download apps through the market, I get "Application Name" could not be downloaded due to an error. This is true regardless of wifi vs hspa.
With the pure stock version, superuser is still installed. Should I have unrooted it before attempting this? I simply followed the directions listed on that post.
Flash the original firmware located in Entropy's Ultimate unbrick thread uckd5. That version is pure stock that is not already rooted. To be safe use the included pit file.
Sent from my SAMSUNG-SGH-I997 using xda premium
Bronk93 said:
Flash the original firmware located in Entropy's Ultimate unbrick thread uckd5. That version is pure stock that is not already rooted. To be safe use the included pit file.
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
i think the time issue is with the modem.......i got the same thing when flashing the new ones.
try another one and see if the issue sticks
glorifiedQA said:
I flashed to both versions listed on http://forum.xda-developers.com/showthread.php?t=1092021 and am seeing the same issues with both.
The time is 4 hours off, I can uncheck auto-time and check it again and the time will be correct for maybe 5-10 min before returning to 4 hours later.
Everytime I try to download apps through the market, I get "Application Name" could not be downloaded due to an error. This is true regardless of wifi vs hspa.
With the pure stock version, superuser is still installed. Should I have unrooted it before attempting this? I simply followed the directions listed on that post.
Click to expand...
Click to collapse
The time thing is a modem issue. The time worked fine when I used the newer gingerbread leak for a few days.
Sent from my SAMSUNG-SGH-I997 using xda premium
Can you clarify what you mean by a modem issue? Sorry I'm a total noob. I tried GTG's ultimate unbrick and the clock is still off. Market works, but it also worked for about 5-10 min after I flashed it last time.
Thanks for the help so far, hopefully I can get this sorted out.
Also if anyone can suggest a solid GB rom with working activesync/SSL I'd be pretty happy. I tried the most recent Infused, but I really need to be able to sync my corporate email and that isn't possible with Infused.
Edit: Fixed time by checking and unchecking automatic time and it looks like the proper time is staying. Also, the market is also working just fine! Thanks for all the help! Still open to some custom rom suggestions
Edit 2: I'm a liar, rebooted the phone to test and it reboots with the improper time :-\ Market still works on reboot though
Installed Infused 1.6.0 just to have something working on my phone, but that also failed to fix the time. (My phone == my alarm clock, so this has been more than a bit annoying)
Thanks for the continued help!
Not sure if bumping is frowned upon, feel free to yell at me if it is, but I could still use some help!
http://forum.xda-developers.com/showthread.php?t=1265207
Flashed to KI3 and now the clock works, thanks for the tip on the modem.

Looking for a stable rom

so my sgs4g was rooted and got on gb with the gb starter pack thread, after which i jumped around between a few roms and am currently running octaneGB.
however, it has always had stability problems, and i can't figure out why. possibly because i messed up bootloaders? i'm pretty sure it can't be the fault of the roms i flashed.
from here, all I want is a stable phone.
can i wipe the phone as it is and then use the oneclick heimdall SMS kj6? would this put me on rooted GB with CWM and good bootloaders? could i simply cwm flash a rom like valhalla after that?
any advice would be appreciated, thanks!
nvertigo said:
so my sgs4g was rooted and got on gb with the gb starter pack thread, after which i jumped around between a few roms and am currently running octaneGB.
however, it has always had stability problems, and i can't figure out why. possibly because i messed up bootloaders? i'm pretty sure it can't be the fault of the roms i flashed.
from here, all I want is a stable phone.
can i wipe the phone as it is and then use the oneclick heimdall SMS kj6? would this put me on rooted GB with CWM and good bootloaders? could i simply cwm flash a rom like valhalla after that?
any advice would be appreciated, thanks!
Click to expand...
Click to collapse
Yes, you can use the one-click to put KJ6 on there then flash a different ROM via CWM.
Personally I've had the best experience with Valhalla ROMs. Last night I just flashed RAVERX3X latest Valhalla Black build. Its low profile so it's quick and responsive, and even better, not a single instability issue.
Sent from my SGH-T959V using XDA App
thanks for the advice guys!
I did the first flash step, which worked successfully and rebooted my phone. then i tried to flash the bootloaders that came with it, but uploading PIT 1/10 failed, and it froze trying to end session. i pulled the battery and the phone seemed bricked, but i connected the cable and oneclick said it was connected (no download mode screen, no lights at all). so i did the initial one-click flash and let it reboot again, then flashed valhalla black.
nothing SEEMS to be wrong, but i'm a little scared. can anyone weigh in on what happened?
You're ok. I can't explain what happened but people have reported similar issues, nothing on the screen but it can be seen in ODIN, and were able to recover (as you did) just fine.
Sent from my SGH-T959V using XDA App
This section of XDA is small, but good in terms of quality.
I just flashed Raver's Cyanogenmod/Valhalla hybrid and it is smooth and stable.
One-Click...
At the beginning of the week, I still had Froyo on my device.
I used Bryan's one-click (SMS-KJ6-beta2d_Stock-Rom_with_Bootloaders-One-Click.jar)...
(I had a scare, too... which involved the so-called "Rainbow screen" -- but FB suggested I run the one-click, again and also to do the Bootloaders -- and everything turned out ok).
But, I needed to get CWM 5 (and, that particular one-click had CWM 3.0.2.8x)
So, I flashed an update of Bryan's kernel (sms-T959V-KJ6-v0.1.1-rc1-unsigned-update.zip)
And, because I was feeling overjoyed at all the goodness that I'd seen so far, I flashed RaverX3X's rc3.zip (from Team Acid's Source Forge site)...
And, life is really, really, really... good.
yep
+1 Valhalla black edition! Installed today and love love love.
ok... my phone is now crashing and rebooting all over the place after flashing valhalla black. it seemed fine for the first hour. should i try the one-click again? or did i not wait 10 minutes after flashing the rom, maybe?
anyone know what could be the problem?
thanks in advance!
nvertigo said:
ok... my phone is now crashing and rebooting all over the place after flashing valhalla black. it seemed fine for the first hour. should i try the one-click again? or did i not wait 10 minutes after flashing the rom, maybe?
anyone know what could be the problem?
thanks in advance!
Click to expand...
Click to collapse
Not sure about the crashing but I experienced reboots because of the kernel Valhalla Black uses. There are fixes out there for that part of the problem but what you should really is perform a factory data reset, do the one to get a ROM with CWM on it, then use CWM to install Valhalla Black per the instructions on the page for it. I've a feeling you'll be much more stable after that.
As for the 10 minutes, that's basically to allow your phone to rebuild the Davlik cache (cache with optimizations for your apps). Definitely let it sit while it does that just to be safe.
thanks yet again. will try this asap!
can i assume that my bootloaders are correct after the weird issues from the last page? you mentioned that it happened to several people, but it still bothers me that technically it never got past 1/10 uploading PIT file :x
also, regarding the problems with the kernel, can anyone point me to a kernel that works with valhalla final and is known to be fully stable? i want to try to do everything to get the phone usable.
nvertigo said:
thanks yet again. will try this asap!
can i assume that my bootloaders are correct after the weird issues from the last page? you mentioned that it happened to several people, but it still bothers me that technically it never got past 1/10 uploading PIT file :x
also, regarding the problems with the kernel, can anyone point me to a kernel that works with valhalla final and is known to be fully stable? i want to try to do everything to get the phone usable.
Click to expand...
Click to collapse
If it was fully booting and you weren't getting the "rainbow" screen, then your boot loaders are fine. If in doubt, go check out bhundven's one-clicks, and run one of them - twice. The first time it doesn't let you check the boot loader box but the 2nd time it does.
Valhalla Final comes with bundven's beta 2c kernel. I believe people are running that without issue. Keep in mind Valhalla Final and Valhalla Black are two different ROMs with two different kernels.
I did a one-click back to stock (factory reset, cache wipes, etc.) & am running bhundven's latest beta kernel with no problems (thus far).

[Q] Rom Flash - Gummy or CM9

Before I started to flash a new ICS Rom (which I am quite excited about) I had a D2G on Hexen. I flashed the CM9 ROM and got bricked, so I SBF flashed back to stock and tried again. Again, a brick. I tried a third time with the same result and then decided to try Gummy instead (thinking there may be some issues with CM9 because it is in Beta). It also bricked. In the end I just flashed back to my backup that I saved from right before I began this process, but I would really like to take advantage of these new ROMs. If anyone has any advice I would be most thankful.
Some notes:
I was the the newest CWM Recovery Version
I checked all the MD5 and they all aligned perfectly
Thanks for any help I receive, if you want to know something else about my phone data during this procedure, just let me know.
so you flashed back to.33 or .608 before you flash cm9?
Sent from my DROID2 GLOBAL using xda premium
odnanreh12 said:
Before I started to flash a new ICS Rom (which I am quite excited about) I had a D2G on Hexen. I flashed the CM9 ROM and got bricked, so I SBF flashed back to stock and tried again. Again, a brick. I tried a third time with the same result and then decided to try Gummy instead (thinking there may be some issues with CM9 because it is in Beta). It also bricked. In the end I just flashed back to my backup that I saved from right before I began this process, but I would really like to take advantage of these new ROMs. If anyone has any advice I would be most thankful.
Click to expand...
Click to collapse
Hexen was made for 2.4.x stock firmware (Android 2.2 and the corresponding Motorola kernel).
All newer ROMs (CM7, CM9, Gummy, Apex, etc.) are based on 4.5.x. Update to 4.5.608 (preferably via SBF; do NOT accept any OTA updates once you're on 4.5.608) and proceed from there.
Ah thanks so much, I forgot that Android Firmware numbers had to match up, I will try again later tonight
forgot that Android Firmware numbers had to match up,
Click to expand...
Click to collapse
just fyi, not android firmware, moto's system version/firmware
Firmware must be watched
Sent from my GT-I9001 using xda premium

[Q] Capacitive Button Help

I just installed UCLD2 Smooth ICE 5.0 followed his instructions and I like the Rom, but I have an issue. My home button and search button do not work at all. I've gone into the settings to see if there is anything to change what the buttons do, but I've found nothing.
Does anyone know what could be causing this? Or what I can do to fix it.
I had the same issue with flashing sky is. I did a nandroid recovery, then reflashed the whole thing and allowed the system to settle longer than the suggested 5 minutes. It works great now. Buttons are fine.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Well as it turns out that was only one of a myriad of problems, I may or may not have permanantly bricked my phone. I let the system settle, but now the screen isn't very responsive when I try to do anything on it. I also tried returning to stock, and have had the same problems.
I don't have any idea what happened, but it seems to be like a kernel problem.
CrazyLineman777 said:
Well as it turns out that was only one of a myriad of problems, I may or may not have permanantly bricked my phone. I let the system settle, but now the screen isn't very responsive when I try to do anything on it. I also tried returning to stock, and have had the same problems.
I don't have any idea what happened, but it seems to be like a kernel problem.
Click to expand...
Click to collapse
If it turns on then its far from bricked. What was your method of returning to stock?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
There's been way too much of this nonsense recently. You don't even know what a brick is. All the new guys need to stop flashing everything they can get their hands on. Stop and read before you do this stuff to your phone. I read for almost a whole month, everything I could find before doing anything. Before I even flashed anything, I had everything needed to fix and return to stock, and made sure I completely understood what I was doing. Read and understand before you break stuff so you can fix it!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I...I....I give up Congrats noobs not just op you have killed my faith in humanity you all have won and destroyed my spirits
Sent from my SGH-T989 using Tapatalk 2
When most of us first installed the leak the fix was to install it again with the 1 click or factory reset.... Are you coming from stock gb or stock ics leak?
Edit: nrm and dx you guys crack me up
CM9 Skyrocket
I didn't flash whatever I could get my hands on thank you. I flashed NexusMod 4.3 Nexus UI first about a week and a half ago. Then I wanted to try and get something a little more like stock, but still ICS so after READING ALL THE INFORMATION on the post for ICS Smoothie v2 I flashed it after wiping data, cache, and dalvik and following the instructions regarding an ICS radio which I had not followed previously with Nexus Mod when I flashed it. Then the problems started.
There is no lockscreen even when the phone decides to work. When I start up the phone. Process.google.acore force closes as does process.google.gapps
Also when I unlock the phone the screen will respond to 1 maybe 2 swipes to find a homescreen then it'll hang.
I used ODIN to return to stock following the instructions on the Stickied post about doing so in the Development section. Also I'm sorry if some of what I said comes off rude I've just been trying to fix this for about 4 days with no luck and I really need some help.
Also I would've responded sooner, but it's finals week at my college so I've only got so much time.
Also I apologize for calling it a brick even though it was not. I do know what a brick is. It's when your device is unresponsive and will not turn on or do anything. It'a a paperweight or a brick.
I was freaking out my bad. I am sort of seasoned I was rooting my HTC Inspire when I got it almost a year ago, and I put ICS on it when the first leaks started coming out. I'm sorry I'm new to this phone. I will be getting better trust me. I just need some time to get used to the different quirks involved in this phone compared to my last one.
CrazyLineman777 said:
Also I apologize for calling it a brick even though it was not. I do know what a brick is. It's when your device is unresponsive and will not turn on or do anything. It'a a paperweight or a brick.
I was freaking out my bad. I am sort of seasoned I was rooting my HTC Inspire when I got it almost a year ago, and I put ICS on it when the first leaks started coming out. I'm sorry I'm new to this phone. I will be getting better trust me. I just need some time to get used to the different quirks involved in this phone compared to my last one.
Click to expand...
Click to collapse
My suggestion still stands use the ics leak 1 click then root see how you like stock ics twiz if you want a more custom rom then goto cwm and wipe cache , factory reset, then in mounts wipe sys, wipe cache and wipe data do all of these 3 times before installing rom and kernel always let.it sit a few minutes to settle....
CM9 Skyrocket
Ok I'm sorry for causing all of these issues I think I found a solution. In the General section and since I can't post links it is entitled:
[FIX] No Power Menu, No Lockscreen, Corrupt Efs FIX! Skyrocket and T989
Sorry I didn't look in General before posting this in Q&A the General section in the HTC Inspire forum wasn't usually gonna have fixes in it maybe root methods, but not fixes for stuff like this.
CrazyLineman777 said:
Ok I'm sorry for causing all of these issues I think I found a solution. In the General section and since I can't post links it is entitled:
[FIX] No Power Menu, No Lockscreen, Corrupt Efs FIX! Skyrocket and T989
Sorry I didn't look in General before posting this in Q&A the General section in the HTC Inspire forum wasn't usually gonna have fixes in it maybe root methods, but not fixes for stuff like this.
Click to expand...
Click to collapse
What radio did you flash?
I did realize I had done it wrong I flashed this: ATT-GALAXY-NOTE UCLC5 radio
but it was the one located in the post for Embryo 2.2 and I didn't flash the embryo rom, so the radio file which Mohan made specifically for his rom didn't go over well with the rom I flashed.
I did get back to stock eventually. It just took a few tries and the efs fix. I'm now putting CWM touch back on my phone and flashing a Gingerbread Rom because ICS on our phone is still a little too iffy for my likeing. I'll probably just wait till Samsung releases source for the kernel and cook my own rom.
CrazyLineman777 said:
I did realize I had done it wrong I flashed this: ATT-GALAXY-NOTE UCLC5 radio
but it was the one located in the post for Embryo 2.2 and I didn't flash the embryo rom, so the radio file which Mohan made specifically for his rom didn't go over well with the rom I flashed.
I did get back to stock eventually. It just took a few tries and the efs fix. I'm now putting CWM touch back on my phone and flashing a Gingerbread Rom because ICS on our phone is still a little too iffy for my likeing. I'll probably just wait till Samsung releases source for the kernel and cook my own rom.
Click to expand...
Click to collapse
I see, the note modem corrupts the efs partition. Glad you read some things and got it fixed!

[Q] Strange Rom Issues

Alrighty, this is one of the weirdest things I've had happen with a phone since I started doing this on the original Droid. Lately I've been using Jellybeans Rom, its been great and my longest running ROM so far, but like a lot of people here I have to try out new stuff quite often just to try it. Well anymore I cant seem to try much else, I wanted to run the newest Liquid Smooth 2.3 ROM that just hit and it wont work at all really, before I redid the whole phone every time I flashed LS 2.3 I couldnt even hit the start button when the ROM first installed, when I did it wouldnt do anything and then the screen would go black and I would have to hard reset or battery pull. Next boot up seemed to go fine, got my gmail up and running and titanium downloaded and then after that, hitting settings options would lock up the phone in just about any app I had, never even got around to trying to restore anything with titanium.
Re-flashed LS 2.3 three or four times and nothing changed, tried fixing permissions, fully wiping, etc. didnt matter. So naturally I figured it was simply the ROM on my phone (mind you LS 2.2 worked fine before) so I went and decided I would try out Avatar ROM, CM based with MIUI themes, this ROM did pretty much the same thing. No idea why...
Next I figured something maybe was wrong with my phone so I went back to the drawing board and started from factory with ODIN, I redid my ROM with stock/root, unlocked the boot loader again and redid custom recovery and all the same thing with LS 2.3 happened all over again, Stock ROM worked great for the bit of time I used it before I tried to reflash LS 2.3 again, Now I'm back running Jellybeans v.15 and it runs perfectly fine as well.
I really have no idea what the problem is, both of those ROMs I've tried are CM based original development, so I'm wondering if its something in there thats causing an issue over the TW ROMs I've used. I've used other TW ROMs with decent success, but I've had some issues with those too that you wouldnt think should happen but it wasnt anything worth noting, just like Jellybeans the best, but even some of those would give me slow down problems and occasional lock ups when Jellybeans doesnt.
Anyone have any clue as to what could be causing this? I used to be able to run non TW roms just fine and its only been in the past month that this has started happening that I've noticed, I've had the phone since January and have been flashing away this whole time and now I cant seem to try out any more ROMs without having major issues......ugh
Your situation is a very random situation but I have something similar happened to me involving TW ROMs in that some of them froze on me. I had to flash the stock ROM.
Bump, anyone having any kind of similar problems?
Sent from my SCH-I535 using xda premium
Vidfreek said:
Bump, anyone having any kind of similar problems?
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
If you've only had these issues in the last month, it could be attributed to the Linux 3.4 kernel that every AOSP rom has moved to. I wouldn't let that stop you though. Are you downloading these rom zips over WiFi or mobile data? Were your downloads taking awhile as well? I know either GOO or AFH was having server issues recently which may have coincided with your downloads. I'd suggest using WiFi if you aren't already and trying again?
Sent from my SCH-I535 using xda app-developers app
Yeah its only been fairly recent and all roms I've tried have been updated since the very end of april, if my phone has major problems with that linux kernal am I going to be able to flash anything again? Everything I downloaded was over wifi but I can try all the downloads again but I'm thinking that won't fix anything, just weird stuff
Sent from my SCH-I535 using xda premium

Categories

Resources