Hi I am new here have been on cm7 nightly for a while tried to multi boot for ics and now i cant enter boot i just get blank screen with bootloader 09.10 code corrupt battery ok ok to program connect usb.
any help would be greatly appreciated
you can try downloading a new recvery to your pc and install it
Thanks for the reply it was a no go ended up flashing another sbf but could not get into recovery tried another one and now just a black screen with white led and rsd lite does not recognize it i think i killed it this time
Edit Mcgiver got me back again just trying to get back to froyo so i can go back to cm7
Related
I have a Motorola CLIQ on the blue screen of death that reads BOOTLOADER USB INIT... and that's it.
Is there ANYWAY for me to fix this? re-flash the phone, re-load android OS, something....????
just try every possible thing you just said,
flash shx firmware
you'll have to flash an shx firmware. look at ModMyMoto - Motorola CLIQ/DEXT - CLIQ & DEXT firmwares Superthread (sticky)
flash this fw w/ rsd lite:
Branding: T-Mobile US
Version: 1.3.18
Bootloader Version: 05.15
Requires RSD Lite 4.5.7.
I have almost the same problem, but mine stays on White Motorola logo.
I wiped my cliq using adb shell wipe all command and now I can't re-flash on RSD Lite because it says "Please wait for all-TCI ready, and try again..."
When executing a adb shell command it returns this error: - exec '/system/bin/sh' failed: No such file or directory (2) -
running adb devices returns:
List of devices attached
0391255714 device
Is there any way to access its internal storage and reflash?
I have tried reflashing the phone several times, it says it completes successfully - but always reboots in to this blue screen with bootloader usb init at the bottom.
any other suggestions?
Latest update: (and it's a bad one)
I downloaded tmo-morrison-viper-1.1.31-P3-rootedbythedude.shx file, flashed it using usb drivers 4.20 and rsdlite 4.5.7
It claimed it flashed successfully, but the phone never rebooted... just stayed on the blue screen with the bootloaded usb init on the bottom.
Now, I've tried to re-flash with either that same .shx file and it error's out. Then I thought maybe unrooting it would work so I tried tmo-morrison-viper-1.1.31-P3-supermonster-customer.shx and it error's out.
I originally tried tmo-morrison-viper-1.1.4-20091012-2014-cprintf-appsbl-P3-secure-supermonster-customer.shx, and it worked and flashed BEFORE today and BEFORE tmo-morrison-viper-1.1.31-P3-rootedbythedude.shx
At this point, the only thing that has changed is now whatever I try to flash, fail's immediately. It only power's on when the usb cable is inserted. I goes straight to the bluescreen with bootloader usb init on the bottom in white characters.
I'm pretty much STUMPED at this point.
Here is a screen shot of what RSDLITE shows when this cliq is connected. Anyone got any suggestions?
Maturz i am having the EXACT same problem. RSD is saying TCI ****, phone boots to the white moto logo, adb won't work. i have NO idea where to take this. The only menu i've seen that looked promising was the recovery menu which you reach by holding camera during boot. By holding(no stickykeys) ALT and hitting L you can see its menu. The options are to run an update.zip( I can't find a single file it will accept as signed/not fail executing), wipe, or restart. The wipe does not fix this issue. PLEASE tell me if you fix your device, I've got a mirror with a keyboard and its a serious bummer. This problem occurred while flashing a rom. RSD ****ed up. Some claim they can get the charging firmware to mount something ADB can talk to by plugging the phone into the wall and then switching to the computer quickly..but i haven't been able to get this to work.
i had this very same problem and i fixed it through rsd flashing the latest firmware. i lost root in the process but i don't have a brick anymore
moxiot said:
i had this very same problem and i fixed it through rsd flashing the latest firmware. i lost root in the process but i don't have a brick anymore
Click to expand...
Click to collapse
Which file did you flash to it? I'm stuck now - where it won't seem to accept any flashing now ... PLEASE HELP
OMG I sumwhat did it!
Turn ur phone off, than at the same time press power, star button & pound button that reboots and start as usual HOWEVER when u turn off the phone it goes back to blue screen! I figured this much maybe now I can reinstall android 2.0 hmmm! Email me [email protected] if u figured it out from there hop'e this help' ;0)
Cordellnj said:
Turn ur phone off, than at the same time press power, star button & pound button that reboots and start as usual HOWEVER when u turn off the phone it goes back to blue screen! I figured this much maybe now I can reinstall android 2.0 hmmm! Email me [email protected] if u figured it out from there hop'e this help' ;0)
Click to expand...
Click to collapse
Can you post the solution here?
HELPPPP
Flashed the original firmware with red light and it failed now my phone stays with a black screen but the keys light up :'(
Bummer!
my phone only turns on when i connect it to the charger and it boots to a Black screen with a blue bar at the bottom that reads "Bootloader USB Init" no motorola logo.
has anyone else ran into this? i had the logo before i flashed "tmo-morrison-viper-1.1.31-P3-supermonster-customer.shx"
Someone help me! this was supposed to be a xmas gift for my sister but now it feels like paper weight.
buddie024 said:
my phone only turns on when i connect it to the charger and it boots to a Black screen with a blue bar at the bottom that reads "Bootloader USB Init" no motorola logo.
has anyone else ran into this? i had the logo before i flashed "tmo-morrison-viper-1.1.31-P3-supermonster-customer.shx"
Click to expand...
Click to collapse
what exactly happened? why did you have to flash?
i got a htc hd7 and i try to put the mango update but for some reason now im stuck with the screen only shows plug into pc . the same screen when u hold the power and camara button down. zune keeps on saying that it cant recover and i cant even update or nothing. anyone got any suggestion what should i do cuz i tried eveyrthing even restore my windows to see if it got my back up n that didnt do anything either sooo pls help
i have the same issue , ihope any one help us with the new platform 4.0.4
Hmm... first question: what error did you get when you tried to restore a backup using Zune?
If the original ROM is still intact, you can try removing the phone's battery for a while and then trying to start it up again. That should take it out of update/restore mode if it got stuck for some reason.
If the bootloader is still intact, you can flash a stock ROM instead. The HD7 has many stock ROMs available, and is very easy to flash. I'm going to guess your bootloader is OK since you're able to reach update mode.
Even if your bootloader is messed up, you can probably boot to USB Host Mode and use a GoldCard (USB mass storage device with a device image on it) to repair the bootloader and ROM. In addition, that would let you install an older bootloader, then install HSPL and flash a custom ROM if you so desired.
Hi Guy,
I need you to help me out here, in the morning today i decided to upgrade my motodefy with cm7 i followed everything mentioned here http://forum.xda-developers.com/showthread.php?t=1054447 , but as i rebooted after installing zips from sdcard my phone went into bootloader everytime. So i used an sbf file and used rsd lite 4.9 to flash. I have tried using so many different sbf but no luck. Now my phone wont power on, not even with vol + - keys. when i plug it to my pc the white led would glow and when i try to flash it using rsd it will show on my phone "sw update in progress" once done rsd will reboot my phone and say that it has passed but nothing happens on the phone.
PLEASE HELP!!
got my phone back using JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF.sbf
thnx
will try to upgrade now, suggestions?
Hey, i am new here i used to get helps lot in this forum but now i am facing a problem that i didn't found a solution for it yet..
first off i tried to change from android 2.3.6 to 2.3.5 (Arabic support) using Odin v1.83 when i put the .tar file into PDA then i run it. gave me failed and the phone won't work again when i restarted it gave me result are like this : Phone--!--PC
please help me i cannot do anything.. i tried to remove the battery using usb cable go to recovery mode,,, download mode but nothing it keep appearing even it i turned off the phone just in one click to power button it appear again.. i am going to crazy and the phone has warranty expired please is there anyway to solve this problem?
I don't know if your phone is the same, but with my Nexus if stuck in bootloop I can plug the usb cable in and use adb to enter command "adb reboot bootloader" and get to fastboot and flash the stock images. Maybe you can try something like that. That's why I love the nexus I thought I bricked it a couple times but I always got back to stock images. or if you have a cwm restore you can get to that once in fastboot.
Thanks for your reply! but where i can find stock images?? and can i make it without formatting everything on it? plus when i did that i wasn't have the sd card inside it and without a sim card also
i found on the web that i need to install default kernel.. i did that and put it to bootloader in Odin and the operation succeed but now i am facing looping on Samsung logo with yellow triangle ... see the picture.. it always loop can't do anything tried recovery mode download mode but nothing.. is there any fast solution please? i beg you guys please
Try to wipe everything trough recovery, and flash another rom.
Just google for Heimdall recovery
Does Heimdall perform anything different than Odin?
try to install leaked original rom ics for gs2. i try it and yellow triangle is out
I have an s7 active that is stuck in the reboot loop. I am able to get it to download mode, but when i try to flash anything it won't flash and odin stops responding.
Can someone please help me?
Its an sm-891a
I was trying to find a stock rom to flash?
jrjorin said:
I have an s7 active that is stuck in the reboot loop. I am able to get it to download mode, but when i try to flash anything it won't flash and odin stops responding.
Can someone please help me?
Its an sm-891a
I was trying to find a stock rom to flash?
Click to expand...
Click to collapse
Here is a pic
I have been able to get it to download mode. I have tried flashing it with odin but it fails. I have no clue what the guy before me put on it. After it fails i get the security warning saying use smart start or something like that.
I have tried it and once I type in the info and click ok the program just closes.
All i am trying to do is get it back to stock.
Can anyone please help me?
Update i was able to get it flashed in odin but it still sticks on the recovery booting screen.
Any help is welcome
jrjorin said:
Update i was able to get it flashed in odin but it still sticks on the recovery booting screen.
Any help is welcome
Click to expand...
Click to collapse
Maybe someone can tell me what this means please
More info
I have tried to flash g891aucu2bqb2 7 all
It didn't flash
I was able to flash g891aucs6csg2 att6csg2 but it gets stuck in recovery booting.
I downloaded the newest sw from Samsung and it wont flash.
I was told i might have the wrong build #
Can someone please tell me something? ?
jrjorin said:
More info
I have tried to flash g891aucu2bqb2 7 all
It didn't flash
I was able to flash g891aucs6csg2 att6csg2 but it gets stuck in recovery booting.
I downloaded the newest sw from Samsung and it wont flash.
I was told i might have the wrong build #
Can someone please tell me something? ?
Click to expand...
Click to collapse
This is flash att 8.04
jrjorin said:
This is flash att 8.04
Click to expand...
Click to collapse
Got this on restart now
jrjorin said:
Got this on restart now
Click to expand...
Click to collapse
FYI
i was able to flash it with the Samsung tool, but it still is caught in the loop.
It comes up with android man and says installing system updating then restarts.
What do I try now??
jrjorin said:
FYI
i was able to flash it with the Samsung tool, but it still is caught in the loop.
It comes up with android man and says installing system updating then restarts.
What do I try now??
Click to expand...
Click to collapse
Update
Last night during the endless rebooting it came up with the recovery menu, then went past the first Samsung active logo to a fading Samsung logo and then the blue att logo.
Also the blue power light is now staying on.
And its still doing the boot loop
Another update :
Here is what I can get sometimes
I feel like someone out there can help me.
Please
Another update
Sorry for all the questions but i am still having problems.
Now I get this
Fail to open recovery no such file or directory
I was able to get to the recovery screen and I did the factory reset 2 times and cleared the cache.
It booted to the att logo and restarted.
Now it just shows the start up screen and then restarts.
jrjorin said:
Another update
Sorry for all the questions but i am still having problems.
Now I get this
Fail to open recovery no such file or directory
I was able to get to the recovery screen and I did the factory reset 2 times and cleared the cache.
It booted to the att logo and restarted.
Now it just shows the start up screen and then restarts.
Click to expand...
Click to collapse
Here is the recovery screen that shows its updated to sw ver 8
There is something weird with this phone. Yesterday I let the battery die to make sure it was a fresh boot and it came up with the red charge light for the first time and the correct charge symbol. Before it would charge but no lights and just a circle with lightning bolt.
Now its just doing the reboot loop again and won't go into recovery.
Has anyone else ever seen anything like that?
I am glad someone was able to help me. Apparently what i have been trying to flash is just a security update.
Can someone please send me a link for the latest full rom for s7 active?
I am able to flash this. G891AUCS6CSG2_ATT6CSG2
Is it a full rom?
I have tried every rom i can find. Either they won't flash because they are an older version, or the stick in the reboot loop.
The farthest i have gotten is the blue att ball
Still no luck and no help
Finally I see my problem.
FRP MODE is on.
I need a combination file for binary 6
Please.
Just wondering if this forum is in limbo . My s7 active was working perfectly fine [til 10/22/22] and then it froze and
then it would only go to download mode. So I flash latest Samfw.com_SM-G891A_ATT_G891AUCU6CTB1 ROM and
it goes to updating system, but displays ERASING - I have tried to install only recovery and the same
happens - It deletes everything I flash ? now it only flashed recovery, boot and modem and wont flash the larger BL,CS,CSC AP files ? Just trying to get the phone working again and to use it as a dash cam - LOL
Thanks for any input