Do you use a passcode lock on your phone? If so is it a pattern or password based. Why or why not? I've just been wondering lately. It's becoming more of a hassle not having a reliable timeout for putting in a password.
I wish you could set the passcode lock to come up only every hour and until then it would use the regular lockscreen that can take you directly to texts/missed calls etc.
What do you prefer?
I used pattern lock for a bit when I first got my phone. Then I realized you could see the pattern left by the grease on my fingers. Also very easy for one to watch you and replicate. Same with pin, as far as one watching you. If someone gets ahold of your phone physically, they have access to your sdcard and internal with adb. the only security I use at the moment is, holding on to my phone.
Sent from my SGH-T959V using Tapatalk
I use the non visible pattern lock and Sim lock.
I'll sometimes disable the pattern lock if I'm using my phone heavily but make sure I enable it when I'm done.
I'm a secret squirrel kinda guy. You just can't pick my phone up and read my emails, text, contacts and browser history.
FBis251 said:
Do you use a passcode lock on your phone? If so is it a pattern or password based. Why or why not? I've just been wondering lately. It's becoming more of a hassle not having a reliable timeout for putting in a password.
I wish you could set the passcode lock to come up only every hour and until then it would use the regular lockscreen that can take you directly to texts/missed calls etc.
What do you prefer?
Click to expand...
Click to collapse
Correct me if I'm wrong, but doesn't Juice Defender give you the ability to set seperate screen off and lock times? Its full of many other usefull tools as well.
I don't use the locks personally, seems more trouble then I'm willing to deal with. I have the app setup to lock and locate it remotely via SMS if the need be. Besides, what's the worst that could happen other then someone seeing all the porn I have on here.
Sent from my SGH-T959V using XDA App
Juice Defender's lock timeouts never worked right for this specific phone. I looked into it a while back and went with Unlock With Wifi. It worked very well in Froyo in the early versions of the app but with GB and the latest versions it locks on its own randomly even though it's been more than 15 minutes (my timeout at the moment).
Lockscreens are just a hassle :/.
I stopped using the pattern lock when I realized that Odin would get rid of it. I'm sure almost everyone has a friend that knows about how to root phones, so if it's lost, the lockscreen doesn't provide that much protection.
Aside from security, it also doesn't let me use my music player on the lockscreen! It was quite annoying to unlock > access music. Now that I'm using the MIUI lockscreen, it's just turning on the phone and pressing the button.
Btw, for those that might not know, pressing the unlock button twice will open up your music player on the MIUI lockscreen! I found out a few weeks ago! XD
Yes I use the pattern just bcuz it looks cool. Lol. I just wish u could also put one of the EDT tweaks lockscreens and the passcode so i could use the MIUI lockscreen :/
-Sent From My Amazing Galaxy S 4G-
Related
hey guys,
any of you found an app to replace the swipe unlock for the unlock pattern, rather than having both?
not urgent as this is the best phone I've ever had, but would be a nice touch.
Sent from my X10i using the XDA mobile application powered by Tapatalk
not possible buddy sorry
yetep said:
not possible buddy sorry
Click to expand...
Click to collapse
You're right... but it's such a shame don't you think... really no need for the swipe, if you have the pattern....
I thought that was the case...
May look into how hard it will be to create an app to do it
The swipe unlock can be replaced with iphone/hero/donut/eclair style unlocking using the lockbot app. So I think an app should be able to solve this (However I'm not capable of making suck apps).
there is a free app called "No Lock" which simply disables the lock screen apparently. If you have the pattern lock underneath this then i guess you would just get that.
i haven't tried this, but just came across it by accident and it reminded me of this thread
Thanks for that, but no luck
It disables both the lock and the unlock screens (if that makes sense)
It is quite handy if you are at home and have the phone on a table and having a text conversation where you keep turning the screen on and off, but not quite what I wanted
I wonder if this is something that could be built on top of to give us what we want, I will email the Dev of this app and see what they say about it.
I will update when I know more
Right then guys, I have had a response from BoD
I sent them this:
Good afternoon,
I have downloaded the no lock app for android. It is great app, however, there are quite a few users of android who would like to see an app that would remove the lock screen but keep the pattern unlock screen or pin screen etc. Im hoping you are open to suggestions, and as you have created the app to remove the lock screens completely (which is pretty much halfway there), I was wondering if you were thinking of creating an app capable of this?
If you are and would like beta testers, I'm sure i could get a few volenteers together to do so.
Thanks,
To which they responded (very quickly too):
Hi!
Unfortunately there is no way (that I know of) to do that currently.
I hope you'll enjoy the app anyway.
Have a nice day,
So.... It looks like they are not aware of how this can be done, IF it can be done, which is a shame.
Thanks sungrad for pointing the app out though
no probs sorry it wasn't much use
it exists in the security settings in the phone (pattern lock ) just enable it
hoss_n2 said:
it exists in the security settings in the phone (pattern lock ) just enable it
Click to expand...
Click to collapse
I have the pattern unlock enabled.
The problem is that to unlock my phone now I have the swipe (with the triangle and the curve) and the pattern unlock. I want the pattern unlock to replace the swipe unlock, rather than be requested as well as the swipe unlock.
It's only a minor issue I have, but it does get annoying when you are using it a lot (text conversation etc)
thefunkaygibbon said:
I have the pattern unlock enabled.
The problem is that to unlock my phone now I have the swipe (with the triangle and the curve) and the pattern unlock. I want the pattern unlock to replace the swipe unlock, rather than be requested as well as the swipe unlock.
It's only a minor issue I have, but it does get annoying when you are using it a lot (text conversation etc)
Click to expand...
Click to collapse
it is really annoying but i have an idea the application mananger if we could know its name we could deactivate it like what they do with htc devices they deactivated htc sense
nobody has a solution for that?
Not exactly what you're after but there are widgets that toggle the unlock pattern off/on. You could toggle the unlock pattern off when texting so you only have to do the swipe. SwitchPro Widget has this feature but I haven't tested it with X10.
EDIT: Found this. It may be what you're after http://www.appbrain.com/app/com.brandongoodman.smartlock
Bump? I just wonder if anyone found a solution to this? I would really want what the OP states
just wanted to add... be careful with the "pattern lock" ... it literally disables your phone after 5 wrong pattern tries. I nearly did a system wipe just to unlock it.. Luckily for me it accepted my email account with "null" for password to re-enable it
I had that no lock app and it looked nice and handy but it messed with the pattern and slide default unlock when I went to uninstall, all I wanted was the pattern but no matter what way I set it,the swipe unlock would always be there, after loads of reboots and setting/unsetting a lock pattern it still did`nt work, this is after I uninstalled, after I dont know how many reboots even when I had the pattern enabled the swipe would come up first then the pattern, sometime only the swipe, it worked itself out, so be cautious of it....
Just curious, how many of you guys use the lock screen? I for one, since the day I bought my inspire, disabled the lock screen. I simply have no use for it.
How about you guys?
I use the app "No Lock", works perfect for me.....
Bounce between Widgetlocker and the Sense 3.0 lockscreen. She lives in my pocket and needs to be restrained when I'm not paying attention to her. Touchscreen & all that.
Sent from my Inspire 4G using the power of the dark side.
I bounce around with mine. Sometimes I like it, sometimes not. But I same as you use no lock to rid myself of it. Most times I don't feel i need a second screen to go through just to get to my apps and stuff
I have the rotary unlock and a PIN after that. I figure that with my phone rooted someone who doesn't know what they're doing messing with settings could really cause problems and some apps have my credit card info so i like to have it locked, it's pretty quick to unlock.
Disabled it the hour I got it and never looked back...
I use Executive Assistant as the lockscreen and disable the regular one
I never use stock 2.2 sense lock, only 3.0. I like widgetlocker, but I'm running cm7, so i use default on the lens setting. looks great.
swatcop1 said:
Just curious, how many of you guys use the lock screen? I for one, since the day I bought my inspire, disabled the lock screen. I simply have no use for it.
How about you guys?
I use the app "No Lock", works perfect for me.....
Click to expand...
Click to collapse
I love it. I use the sliding tab lockscreen with the four tabs. I use it quite often.
I definitely use mine (Widgetlocker). I place everything I might want/need to see on it. Currently I have an icon for the app Screen Off and Lock, and the following widgets: Watchdog, CurrentWidget, SetCPU, Next Alarm, and MissedIt (unread counts). I disabled interactions for everything except the icon for Screen Off and Lock (I set the timeout for the lockscreen to be 30 seconds, giving me plenty of time to look at my device information. I use the Screen Off app to turn it off as soon as I'm done).
I have my corperate emails linked with my phone which requires me to have my screenlock password enabled for it to work. I hate having to put in my code every time I look at my phone. Is there any way to bypass this security requirement, like tell the server that I have this feature enabled when it is not? Thanks.
Sent from my Inspire 4G using XDA App
Have you tried the app No Lock? It's free in the Market. Basically it disables the lock screen. It's been a while since I've used it, but if I remember correctly you can still have a security password set. No Lock just never lets the phone actually lock. You can enable/disable it easily with a widget on your homescreen.
I used to use it because I wanted to be able to wake the phone using the volume keys. Since I found a mod to allow that and still have the lock screen enabled, I stopped using the app.
Look I'm the android general forums. They have a way to bypass it, but mind you that if your IT department finds out you can get into trouble for it.
The no lock app prevents the lock from turning on if the screen goes black due to inactivity, and suits my need perfectly. I can push the power button and the lock comes on. Thanks for the help and advice.
Sent from my Inspire 4G using XDA App
I am looking for a lockscreen app that supports alternating low and high security measures.
The lockscreen should allow me to start i.e. camera app without any security. But if I were to open gmail app or to unlock phone, I will be required to unlock it with password/pattern.
I'm using SGS2 (I9100 on stock ICS 4.0.3). I've spent a couple of hours investigating but could not find such an app.
The fact that I could not find one baffles me as I'm sure I'm not the only one who wants protection, but not at any cost. Using more than 10seconds to unlock and start camera and waiting for it to open, have made me lose many Kodak-moments. The alternative is to have quick access with no security. So the option with quick access to some apps without security would be great.
+1 For this. I'm sure it's out there somewhere, but I haven't found a way yet. Seems like an obvious feature.
+1 been looking for the same thing today. Cant believe samsung didnt leave in the ICS lockscreen!!! Sure this has direct access to camera without unlock code.
I found widgetlocker but this isnt going to bypass a lock if active.
The most annoying thing is that if you press the sleep button it always locks straight away despite setting to 10mins or whatever.
If you find anything please let us know.
Cheers
+1
Sent from my SPH-D710 using XDA
direct access lock screen
+1
I'm looking for the same thing and if I find something I'll post it asap.
Me too
I m looking for the same apps of funtions.
but i have been search for some period of time. not found.
most of it is for very low security only.
if u guys know pls inform me. Thanks
[email protected]
What do I need to do to have the pattern lock be the only lock screen I have? I removed the sense lock screen but that puts the ics lock screen first and then the pattern unlock which is a complete waste of time.
Sent from my HTC VLE_U using Tapatalk 2
Sense lock and pattern
Unfortunately I don't see a way to disable the HTC Sense lock since it it the only thing that protects the phones from input. You will have to unlock Sense before you can use whatever security settings you have applied.
The only thing I could see as a possiblity is removing the HTC Sense software but then what is the point of having the HTC One S? Most likely a custom ROM will be the only way to get the results you are looking for.
It is very easy to remove the sense lock screen. As I indicated, I already did that. Now the ics lockscreen comes before the pattern which makes no sense (pun not intended)
Sent from my HTC VLE_U using Tapatalk 2
Bump
Sent from my HTC VLE_U using Tapatalk 2
I know this might sound like a pain, but using the facial recognition will also work, if the recognition doesnt recognize it goes to a pattern unlock.
You still need to unlock using the sense unlock or the ics unlock first.
OP, I'm not really sure how this is supposed to work, and I've never seen this behaviour on any ROM, ICS or Gingerbread. The problem is, how is the phone supposed to know that you want to unlock if there is no lock screen?
Let's say the phone is sleeping and the screen is off. No way to unlock right now. So then I press the power button to wake the phone. That doesn't necessarily mean I want to unlock it. Maybe I want to check the time, or see if I have any notifications. There needs to be a further action to tell the phone I want to unlock, which is the purpose of the lockscreen.
The pattern lock is not designed to BE a lockscreen, it is designed to prevent people unlocking your phone who are not authorised to do so.
kuroneko007 said:
You still need to unlock using the sense unlock or the ics unlock first.
OP, I'm not really sure how this is supposed to work, and I've never seen this behaviour on any ROM, ICS or Gingerbread. The problem is, how is the phone supposed to know that you want to unlock if there is no lock screen?
Let's say the phone is sleeping and the screen is off. No way to unlock right now. So then I press the power button to wake the phone. That doesn't necessarily mean I want to unlock it. Maybe I want to check the time, or see if I have any notifications. There needs to be a further action to tell the phone I want to unlock, which is the purpose of the lockscreen.
The pattern lock is not designed to BE a lockscreen, it is designed to prevent people unlocking your phone who are not authorised to do so.
Click to expand...
Click to collapse
I completely disagree. If you press the power button, you want to use your phone. If you want to check the time, do that in the status bar or the fact that it displays on the pattern screen regardless. There is no point in having an action to tell the phone I want to unlock it.
hah2110 said:
I completely disagree. If you press the power button, you want to use your phone. If you want to check the time, do that in the status bar or the fact that it displays on the pattern screen regardless. There is no point in having an action to tell the phone I want to unlock it.
Click to expand...
Click to collapse
+1
Sent from my HTC One S using XDA
You can disagree, but that's not the way that Android works, and it never has been. It's also not the way iPhone works, for that matter.
The fact that it has been this way "forever", isn't an argument for keeping it this way. What if we had to press the power button 20 times to wake it up? Would you like to keep it that way because it had always been that way? No, you would've said it was useless.
I want to use some sort of security, but I don't because the way it is now it just takes too much time.
If anyone made a lockscreen that way, that UI designer would probably get fired pretty quickly.
The fact is that the trend is going in completely the opposite direction of what you want; the trend as you can see from HTC's lockscreen and also the ICS lockscreen is to display more information on the lockscreen without having to unlock the phone (time, weather, notifications, music etc). That decision is the result of customer feedback and market research.
So the way the phone designers are looking at it is (in the case of using a pattern lock or face lock):
Step 1) Information screen (lock screen)
Step 2) Security screen
I think the closest to get to what you want to do is install something like volume wake + volume unlock, so you can press the key twice in quick succession to wake the phone and skip the first lock screen, and go to your pattern as fast as possible. There is no way that I know of to completely get rid of the lock screen totally.
It takes about 1/2 a second to swipe the ring to get to your pattern lock, so I think "it takes too much time" is a bit of an exaggeration.
kuroneko007 said:
You can disagree, but that's not the way that Android works, and it never has been. It's also not the way iPhone works, for that matter.
Click to expand...
Click to collapse
That's not true, the lock screen as he described it is exactly how my nexus one worked in Android 2.1-3. It is far simpler and provides all the information needed to either power off the screen or continue to unlock, in one step.
dscel said:
That's not true, the lock screen as he described it is exactly how my nexus one worked in Android 2.1-3. It is far simpler and provides all the information needed to either power off the screen or continue to unlock, in one step.
Click to expand...
Click to collapse
I have always used a hidden lock screen with gesture unlock. So when I hit my power button, I see some basic information. No indication it is a security or lock screen, until I enter my special gesture to unlock the phone.
I agree with the OP, there needs to be more options. Can't wait for CM 9...
kuroneko007 said:
You can disagree, but that's not the way that Android works, and it never has been. It's also not the way iPhone works, for that matter.
Click to expand...
Click to collapse
Android has NOT always been this way, CM7 definitely had this behaviour. Ie no pattern unlock = ICS lock screen. If you have a pattern lock, the ICS screen does not get used.
So + 1 for the op on this, I really can't stand having to unlock twice to use my phone, but I still want the security of the pattern unlock or the number lock or the face unlock.... Pleeeease!
OK, I admit: I was completely wrong. Very sorry.
I tried this on AOSP Gingerbread and ICS, and in both cases, the pattern lock is part of the lockscreen that comes on when you turn on the screen, as OP said.
The problem that you have is that the pattern unlock HTC's pattern unlock app, it is not the normal Android pattern unlock (you can tell by the icon design, fonts etc). So it can't integrate with the stock lockscreen.
The only way to do what you want is to get rid of Sense 100% (not just hiding it), and that means use an AOSP-based ROM such as CM9, AOKP or "JollyRancher".
kuroneko007 said:
OK, I admit: I was completely wrong. Very sorry.
I tried this on AOSP Gingerbread and ICS, and in both cases, the pattern lock is part of the lockscreen that comes on when you turn on the screen, as OP said.
The problem that you have is that the pattern unlock HTC's pattern unlock app, it is not the normal Android pattern unlock (you can tell by the icon design, fonts etc). So it can't integrate with the stock lockscreen.
The only way to do what you want is to get rid of Sense 100% (not just hiding it), and that means use an AOSP-based ROM such as CM9, AOKP or "JollyRancher".
Click to expand...
Click to collapse
Thats what I hear! LeeDroid told me pretty much the same.. I normally would have jumped to go AOSP, but Sense isnt so heavy now and I quite like the framework, i.e the copy paste stuff, the browser seems to be more capable with handling frames etc.. I have changed my launcher, so I now get pretty much the best of both worlds!
But damn that forced lock screen!
Bump
Sent from my HTC One S using Tapatalk 2
The answer is already there at the end of my last post. What you want is not possible on a sense rom, so go install CM9.
Sent from my HTC One S using XDA