well, I guess I bricked my phone.
I tried to install Humble on it. Long story short, phone is connecting to Odin, any flashing fails.
Odin says "no PIT partition". tried to Odin PIT file on it, failed again, repartition failed.
all I have is black screen with white cell phone outline..yellow triangle...PC outline. that's it.
sort of like cell has issues connecting to PC?
phjone will not restart, only jumps to that logo on the screen right away.
btw, is Droid Charge same thing as Fascinate? there's no Droid Charge section here.
you did put the odin file in the pda section and only the pda section and phone in download mode batery out volume up plug usb in to do this if you put this in any section you could have bricked your phone and/or if you unplugged your phone in the proccess...
p.s. this is the charge forum...
You dont use a pit with humble only going back to stock rom. Start Odin, plug usb to main usb port of computer, take battery out of phone, put battery in phone. Now hold the down volume key while connecting the usb cable to your phone. You should see your phone go into download mode. Select pda function and search for the humble .tar or .md5 file, Dont select re partition. Hit start and you should be good to go. The latest humble ep4d comes with cwm etc already in it. If you are coming from humble 5.0rc2 then you need to follow those instructions. I might go about things the long way but its the only way I know how. Its was easier for me to just install
http://forum.xda-developers.com/showthread.php?t=1365376
as it has everything all packaged.
fixed it. was simple cause - basically, it was telling that there was failing connection between phone and PC. that's what logos were about.
I moved USB cable to a different port, on a hunch, and suddenly it all worked like a charm.
got Humble on, done - almost - with set up.
thank you.
Wasn't I helping you over on AndroidForums.com?
Anyways, glad you got back up and running.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Related
HELP! I was trying to frehsly install a rom..
so i used odin to "master clear" everything
it deleted everything!
hoping that in recovery mode, it'll let me "mount storage" so i can transfer my new rom into the phone, that didnt happen!!!
so, then i tried to go with odin 1 click to install i896 stock...
and it doesnt work , so i unplugged phone, and now i get that mobile phone error..
please help, the only thing i can do successfully do is put my phone in download mode! D:
PLEASE! PLEASE!
THANK YOU!
Open Odin, turn off your phone, hold the volume buttons, and plug it in to get it in download mode. Then use Odin to get stock rom on, then go from there.
Sent from my SAMSUNG-SGH-I897 using XDA App
Read carefully.....
ags on board said:
Open Odin, turn off your phone, hold the volume buttons, and plug it in to get it in download mode. Then use Odin to get stock rom on, then go from there.
Click to expand...
Click to collapse
+1
Go into the ODIN thread and read extensively. Since you can get into download mode, make sure that once you connect your phone you get the COM notification in ODIN. Mine always appears in the small box in the upper left portion of ODIN one-click (if you don't get this, reinstall the samsung drivers found in the ODIN thread and reboot. If you're running Win7, make sure you run ODIN as admin).
Master Clear does exactly what it says...it wipes all of your data. MC is only supposed to be used when your phone is on and fully booted up with USB debugging on.
Flashing back to stock should only take ~5 minutes max - if it halts unplug, pull your battery, wait a few seconds, and restart. If it continues to fail, try a different USB port. If using a PC, use the back USB ports. If it still fails, try a different system. (I had this issue this weekend and finally got it on the first run on my friend's laptop - not sure what happened, had flashed 5-6 times on mine previously).
Hope this helps. Once you're back to stock, be sure to thank designgears for his killer dev work!
EDIT:
PS It's pretty tough to brick a cappy - read extensively in the ODIN thread and you'll see what I mean.
Its always good practice to back everything up and know the step by step procedures before you ever do anything. Good luck!
Connexxions "how to" videos are VERY detailed and shows you step by step how to do just about everything on this phone. I highly recommend them.
don't panic, ur lucky that u can still get into download mode. that is just soft brick I think..
Sent from my SAMSUNG-SGH-I897 using XDA App
I tried flashing MUIU onto my Captivate and now it doesn't make it pass the boot screen. Then I set it to download mode while connected to ODIN3 and I checked repartition and auto reboot and f.reset time and now when I turn on my phone it has this symbol that has a phone triangle and a pc on it. PLEASE I need help on how to get it back to working condition.
You mean you see that triangle after your ODIN flash has completed?
What build number under is your battery(10.XX or 11.XX)? If compatible, look for ODIN 1click and the drivers. Fire it up, remove your sim, external sd, and battery, then plug in your mini usb cable. hold the volume up key and put the battery back in. You should be able to get back into DL mode. Master Clear then flash 2.1 again and start over.
I apologize if I sound like an idiot but I got back into download mode but I don't know how to flash a stock ROM back onto the phone. Thanks to anyone who posted in this thread I really appreciate it.
Do a little reading in this thread. Best of luck to you!
clemmie said:
Do a little reading in this thread. Best of luck to you!
Click to expand...
Click to collapse
Thank you!
Please do some research so you know what you are doing before you flash your phone. Then if you run into trouble and cant fix it then do some more reSEARCH to fix the issue before opening a new thread.
So I been trying to fix my friends Captivate for a few days now.
I posted a video a few days ago. I did get it into download mode with my jig. However everything froze while I used the 1 click captivate heimdall to flash my phone. (It did flash but some things did not work)
Anyhow now My phone has "Phone - ! - PC"
No download mode, the jig sends it back to this screen too. I tried so many button combinations. I really don't want to send my phone in to some website. I was so freakin close...
Please help
My Evo 3D is laughing at me and the captivate.
I pull out my battery and let it discharge for about 15 secs and hold volume buttons then connect USB cable and finally insert battery while still holding volume buttons of course, it'll get you into download mode. Never failed me. I've had my phone not even turn on the screen, it stays dark during a screwed up flash with odin. I then flash UCKI2 with bootloaders and then flash to gingerbread ROM I like. If you plan on installing custom ROMs your phone will semi-brick numerous times. If its showing a phone, exclamation mark and computer with a message saying firmware flashing failed. That is perfect! Just make sure you have Samsung USB drivers and simply flash using odin, it'll show COM and a number like 5 (COM5) then just flash. I'd advise you to remove any external SD card and restart before using odin it acts up. Hope this helps
hupo224 said:
So I been trying to fix my friends Captivate for a few days now.
I posted a video a few days ago. I did get it into download mode with my jig. However everything froze while I used the 1 click captivate heimdall to flash my phone. (It did flash but some things did not work)
Anyhow now My phone has "Phone - ! - PC"
No download mode, the jig sends it back to this screen too. I tried so many button combinations. I really don't want to send my phone in to some website. I was so freakin close...
Please help
My Evo 3D is laughing at me and the captivate.
Click to expand...
Click to collapse
The "Phone - ! - PC" will be your download mode screen. Just download from there.
However, if a flash goes foul somehow, you may be left with the infamous "phone--/!\--PC" screen.
If you see this, don't panic. Although it's not technically the download mode screen, many users (including myself) have been able to successfully flash from that screen. Give it a try.
Click to expand...
Click to collapse
Comes from this thread:
http://forum.xda-developers.com/showthread.php?t=1351224
Let me reiterate cause it will save you the same thing happening, reboot your computer, be connected to internet, remove SD card and then open odin and then connect your phone and flash otherwise high likelihood of something going wrong again. I'm used to it but its frustrating the first couple times.
asasione said:
Comes from this thread:
http://forum.xda-developers.com/showthread.php?t=1351224
Let me reiterate cause it will save you the same thing happening, reboot your computer, be connected to internet, remove SD card and then open odin and then connect your phone and flash otherwise high likelihood of something going wrong again. I'm used to it but its frustrating the first couple times.
Click to expand...
Click to collapse
100% - I had similar experience with my first flash but after a few goes at it and 3 or 4 "soft-bricks" all has been great!
Well when I plug it in Windows 7 doesn't even detect it anymore. But the phone will go back to that screen when the USB is connected.
Nothing in ODIN/Heimdall pops up...
Please help..
It seems I got it in download mode this morning with the jig. Just trying to get my damn pc to read it. Sometimes the right drivers work sometimes they don't. ugh
Connection issue in my sig
Any chance you have another pc to try it with? Or possibly another cable?
Going to try one click on ubuntu...
Ive had issues in the past before with certain USB ports on my PC not reading the phone.
Try plunging in your phone to a different USB port and it can make a world of difference with the driver issue (even if you have to plug it in the back of your PC).
try one click unbrick in the android development page
hupo224 said:
Well when I plug it in Windows 7 doesn't even detect it anymore. But the phone will go back to that screen when the USB is connected.
Nothing in ODIN/Heimdall pops up...
Please help..
Click to expand...
Click to collapse
Are you running x64? If so are you running the 64 bit drivers?
I also had the same issue a couple of times, which is technically called a "soft brick" . You could resolve this issue using ODIN flasher and reverting back to stock. Now coming to USB problem in windows, this is a known issue with windows (especially Vista and Win7) and samsung!! The remedy which I found is as follows :-
1.Disconnect the phone from USB
2.Remove samsung USB driver software from your windows PC.
3.Reboot and then navigate to C:\Program Files\ (assuming that C:\ is your windows OS partition)
Delete "samsung" folder.
4.Download latest samsung USB Drivers for captivate and install.
5.Reboot the phone.
6.Open ODIN and connect your Phone to PC.
It should detect the COM Port by now. Try this and get back
"Thanks" , If I helped U
Hello all, any help would be greatly appreciated.
My wife's phone has been rather buggy so I decided to root and rom it. Rooted the phone with the oneclick method. Moved on to getting CWM up and running (it is what I'm familiar with from my G2x). I liked what I was seeing with the Valhalla Final rom OP and decided to give it a try. Read the instructions to install but things have steadily gone down hill.
I am comming from stock. I did a NANDROID backup. Wiped, wiped, wiped and then flashed the ROM. I do believe that I just didn't read carefully enough where it says I "must have pre-installed kernel" . When I rebooted I got a pixelated screen unreadable screen. There was a voice in the background describing what was going on but I plugged along and waited the 5-7 minutes. Figured if it didn't work correctly I would just go back into CWM and restore my nandroid backup. However I can no longer get back into CWM or the recovery prompt that comes before CWM. I just get the Galaxy S 4g screen which then goes to the weird pixelated screen and then it continues in a boot loop.
I tried to follow this debricking thread but got stuck a couple of times. First, that I can't find the boot.bin and sbl.bin files. I google around and found this but the download link no longer works. Does anyone have the boot.bin and sbl.bin files handy?
Also, the Zadig program to install the Heimdall driver doesn't show me any driver options. I suspect that this is because Heimdall or Zadig had not run on the computer before I had the phone properly connected. I saw that it was the Samsung Composite driver that was being asked for. Not sure if I found the correct one but either way it didn't work. I was unable to get the computer to recognize the phone (also phone would continue on its boot loop, also it doesn't change anything whether I am holding down the volume buttons when I turn the phone on or not).
I have stayed up half the night looking for something but am wondering if I just straight up bricked the phone and need to send it to someone with JTAG experience. Let me know if there is something I am missing or some suggestions you have.
Go here:
http://forum.xda-developers.com/showpost.php?p=21953878&postcount=2
The problem is that you tried flashing a gingerbread rom even though your phone still had Froyo bootloaders. If you flash a gingerbread rom using one of the one click files mentioned in the guide, you'll be able to flash more GB custom roms.
Don't worry your phone is fine, you just need to read a little more and you'll be good to go.
Thank you very much for the link, the post is very through. I am getting stuck because my phone appears to not want to go into "Download Mode." Every time I press the up + down vol buttons and plug in the usb I just get the attached images and they go in an infinite boot loop.
I have tried every usb port on the computer and followed the instructions near the first of the post and uninstalled all ports which had Android or Samsung associated with them. I also tried all the different ways I could to get into download mode based on this link.
I am currently in the process of uploading a clip of the infinite boot loop I am in on Youtube and will post it if it helps.
Again thank you all for your help. The XDA community is the best!
That is the rainbow screen indicating you need GB bootloaders. Just pull your battery. You need to flash twice - second time checking the 'flash bootloaders'.
For the driver issue/phone not recognized by the computer - There is a tool in the guide called USBDeview (in the notes). Use it to make sure you have uninstalled all android related/unknown drivers. Go into uninstall programs and make sure you uninstall Samsung drivers. Restart your computer. I also run the CCleanner reg cleaner. Then restart computer again.
For Download Mode - Pull battery. Plug your USB into your computer only. Make sure you are pushing both the volume up and down buttons simultaneously. Without putting battery back in, plug your USB cable into your phone while continuing to hold volume up and volume down buttons. Keep holding volume buttons with USB plugged into phone and computer and put the battery back in.
Start guide over and read thoroughly.
Fb that's the screen I got coming back from nand back up!!! I had to flash a diff kernel with Odin to fix it
Thanks for all your help. Ironically I was doing everything correctly, but my usb cable had gone bad on me the night that it all happened. So thanks all, espicially lumin30 for the excellent guide and for FBis251 pointing me to it. After switching to a working cable and completing lumin30's guide all is now working great!
As a random side note the driver section showed up slightly differently for me (the device I had to pick was [usb composite] but once I figured that out everything went well).
Glad you figured it out
I have been using android phones for a long time, and used odin before, so I have no idea what is going on here. I was attempting to root my phone using the downloads and info in the sticky here, and now my phone won't turn on. I put the phone in odin mode, it was detected, i flashed the bootchain (step 1) in the PDA section, the screen went blank, odin said "Reset" in the first box, and sat there for a long time. Then it said pass, but there was still nothing on the screen. I waited a bit, but eventually unplugged it and tried to turn it on. I can't get any button combination to work, no recovery, odin mode, or normal powerup, no response if I plug in usb or the charger, the only thing I can get is if I plug the charger or usb in with no battery, the red light will come on for about 15 seconds, then go off. I really am afraid I bricked my phone somehow the first day I got it, and now I'm leaving on a business trip tomorrow and need to get this sorted tonight.
Am I out of luck, or is there something I'm missing?
How exactly did you try to enter recovery mode? I know that when I did this and i attempted to enter recovery i let go of the home and volume up too soon and the same thing would happen to me. Also make sure you are using odin v3.07
Did you verify the md5 signature of the file on your pc before you flashed it in Odin? If not, you should check it now. Could have been a bad download. Knowing what caused the brick can help us figure out how to fix it